There are no ifs in life, and even more for decorations. There is no what ifs after the decoration is finished. In order to avoid this kind of regret, we summarized many kitchen decoration experiences for you.
1. The most durable cabinet door panel is the fireproof panel, the shortest life span is the blister, the most non scratch resistant is the painted, the most expensive is the solid wood, and the cheapest is the double veneer.
2. The stainless steel countertop is the most durable, the artificial stone is the least resistant to dirt, and the quartz stone is the most expensive. If used frequently, stainless steel countertops are the most suitable. If the color tone is cold, you can use panels and tiles appropriately.
3. The stainless steel embossing countertop is less scratched than the brushed countertop.
4. The stove must have small openings on the surface to prevent the soup from overflowing into the stove.
5. The sink must have a bottom grid to prevent the sewer from being blocked and to facilitate cleaning.
6. When renovating water pipe and electricity, you must think about the cabinet layout and electrical requirements. Be sure to reserve enough sockets. It is better to keep sockets on the front and rear walls. Waterproof covers are not necessary.
7. If most of the gas pipes are wrapped in the cabinet, it is best to leave a gas alarm socket.
8. The tiles in the kitchen can be matte or polished, which are easier to clean. Don't choose pitted or rough models, which are difficult to take care of.
9. If you rarely cook, consider an open style. If cook much, it is safer to be closed. No matter how good a range hood is, it is impossible to suck all the fumes away.
10. The hose must be replaced every two years.
11. In addition to the main valve, it is better to have separate valves for gas stoves and gas water heaters, so that they can be closed easily when problems occur.
12. The sink drain must be made S-bend, otherwise the smell will return.
13. Do not apply glue between the stove and the countertop to facilitate safety inspection.
14. When installing the side range hood, it is better to be as close to the stove as possible.
15. If you install an ordinary or European-style range hood, it is better to install a thin stainless steel plate on the tile around the stove, so that it can be easily cleaned.
For decoration, it is not easy to choose a suitable washroom basin. There are a lot of basins that are just plain useless.
Should we choose an over-counter, under-counter, integrated or pedestal basin ?
Let's take a look at the advantages and disadvantages of these basins and see which features are what we want most.
The bathroom is sometimes a dirty space, which is not easy to clean and take care of. The dampness, dirt, and bacteria can easily breed. Well, there may be cockroaches and spiders...
To keep the bathroom clean and tidy, the two most important points are: easy to tidy up and keep it dry.
If you choose basins based on these two points, let's analyze them one by one.
Above Counter Basin (Always Beautiful)
I stayed in a hotel once. The bathroom design was very creative. There are two wash basins. One is a normal under-counter basin, and the other is an above-counter basin with excellent artistic sense.
I use the under-counter basin for washing, but I always glance at the above-counter basin like a work of art.
Almost all such beautiful above counter basins can become an installation art in the home. For those who are pursuing art decoration, you can consider buying an above counter basin.
Under Counter Basin (Practical)
The embedded under counter basin and the "invisible" shape make the wash area look more refined and simple. This is probably a basin that many families use more often.
The basin connected with the countertop (Easy to Install)
The countertop and the basin are integrally formed, which saves a lot of trouble for cleaning. Because it is a modular grouping mode, the installation has zero pressure.
Semi-hanging Basin (Saving Space)
A semi-hanging basin is suitable for some customers, if we want to leave a little more space.
Pedestal Basin (Long Legs)
Especially suitable for use in small spaces.
Cylindrical Basin (Artistic Sense)
The cylindrical basin can be disassembled. Because it is straight-through, it is not easy to block. The disadvantage is that there is no countertop for placing bathroom accessories.
The selection of the basin also needs to be decided according to the specific design plan, such as shape, color matching, size and so on.
Finally, in order to keep this space dry and clean, we need to use a dry towel to wipe off the water in time, ventilate as much time as possible every day, and so on. Although it may seem troublesome, once you develop a habit, it will naturally be a lot easier .
For a more useful and faster-drying bathroom, toilet, shower, and washbasin must be separated.
The toilet, washbasin, and shower located in three areas allows people to use them separately.
This design has more advantages.
1. Dry area always being dry.
Using a three-separated bathroom, when the shower is completely independent, the sink and toilet area will not be affected by the shower. Cleaning is also more convenient.
2. More people can use the bathroom at the same time.
In the morning some want to use the toilet and some want to brush their teeth. If there is no separation, as long as one person enters, the whole family will have to wait.
However, with the three-separated bathroom, everyone can save time and use separately.
Three-separated Bathroom Layout
If the bathroom is a long and narrow shape, it is recommended that the toilet, washbasin, and shower are arranged in a row.
Usually the most frequently used washbasin will be placed in the middle, so you can come in and use it at any time. To the left and right are the shower area and toilet.
The toilet and the shower area can also be arranged on the same side, and the washbasin is placed on the opposite side to form a T-shaped arrangement. Hotels often use this layout, which is relatively confidential, but does not waste space.
If you want to add a bathtub, because the bathtub is used less frequently, it is usually placed in the corner next to the washbasin.
But to be honest, the three-separated bathroom requires a relatively large area. The partition wall will be added, and the distance between the shower, toilet and washbasin will be increased. If three separations are used, it is bound to reduce the size of other spaces.
Design and Construction Considerations
1. The minimum shower area wide is 90cm.
The shower area should be kept wide enough for the person to turn around, and hands should not touch the wall easily when showering. It is convenient to have a width of at least 90 cm.
2. The toilet area is at least 70cm wide.
If you don't want it too narrow when going to the toilet, the wall should not be too close. Starting from the center of the toilet, leave a width of 35 cm or more to the left and right to make it easy to use.
The human action is to turn around and sit down on the toilet, so 60 cm of moving space is required in front of the toilet.
3. If the toilet is adjacent to the shower area, the water pipe is easy to install.
When the toilet and the shower area are adjacent to each other back to back, the pipeline can be hidden in the partition between the two, and the distance of the pipeline can be shortened.
4. There is no need to install a floor drain in the toilet and washing area.
Since the three-separated bathroom has completely separated the toilet, washbasin and shower, and now fewer people will flush the floor. Therefore, it is only necessary to install a floor drain in the shower room. Blocking with waterproof strips can ensure that the toilet and washbasin area remain dry. For floor cleaning in dry areas, it is recommended to wipe with a mop.
5. Reduce the area of waterproof coating.
Ordinary bathrooms are usually recommended to do waterproof layer on the walls and floors of the whole room due to the spread of moisture. However, in the three-separated bathroom, there will be no excess water vapor in the toilet and washbasin area. It is recommended to do waterproof only half-height walls.
Then we take a look at the examples of the three-separation bathroom.
This is a typical hotel bathroom layout. The sink is in the center, and the toilet, shower area, and bathtub are placed on both sides, forming a U-shaped layout. Suitable for use in large-area bathrooms.
The doors of the shower room and toilet area are designed with metal mesh, which is ventilated and can be cleverly hidden.
The walls and floors of the whole room are paved with the same marble. With metal accessories, the overall style is particularly high-end.
With the double washbasin design, two people wash at the same time without being crowded. With double-sided mirrors and wall lights on both sides, it forms a balanced and symmetrical design.
The retro tile floor, the decorative pillars on both sides of the countertop, the delicate and elegant chandeliers, the natural and romantic simple European style.
Off-white is selected as the main color of the space, matched with earth-colored walls. The calm atmosphere makes the bathing space more comfortable and relaxing.
If you don't make a door, just use cement partition to separate the shower area or toilet, which can reduce the visual barrier.
A sliding door is used between the shower area and the bathtub, which can be ventilated at any time and can achieve the effect of privacy.
The washbasin area is in a single row. Since it is isolated from the shower area, it is relatively dry. The dressing storage is also set together, making it easier to use.
The wash area is in line with the toilet area. The bathtub is next to the shower area. Effectively separate the dry and wet areas. At the same time, hooks are installed on the wall for the towels and bathrobes.
If the bathroom does not have a window, you may wish to use colors and lights to brighten it up. The orange half-wall design makes the space bright and vibrant. Place some flowers and plants to make it more vibrant.
The wall is made of cement gray, so even if water drops splash off, it will not leave a trace. The mirror cabinet on the top can effectively increase the storage capacity.
In order to leave the central aisle, move the sink outside. Arranging the shower area and the toilet back to back not only effectively shortens the length of the water pipe, but also makes the design more concise.
In a typical T-shaped layout, the shower area and toilet are hidden behind the washbasin to maintain privacy. The wash area divides the bathroom into two parts.
The entrance of the bathroom is designed with arches, and the retro red bricks are more antique. The tiled floor extends to the left and right.
After reading the above cases, do you think it is good-looking and practical?
Thanks for viewing our website. Hopefully you can find your interested items. Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business. We are one-stop supplier of bathroom and kitchen products.
The bathroom is the wettest place in the house, and it is easy to breed bacteria if it is not properly cleaned. Next, learn these tips to make the bathroom as clean as new!
Clean the Faucet
Does the water stain on the faucet look dirty? Water stain can be removed with one trick! Mix the white vinegar and baking soda powder evenly, put the toilet paper in and soak it completely, then cover the faucet for 30 to 60 minutes, uncover it and rinse with water.
Cleaning the Shower Head
If the shower head is used for a long time, there will be a layer of scale on the surface, which looks dirty, and even more serious it will block the water outlet! You can take a plastic bag, pour white vinegar, wrap the shower head and fix it with a rubber band, soak it for 1 hour and then dry it with a dry towel. The shower head will be as clean as new. A clean shower head is much more comfortable to use!
Cleaning the Toilet
1. For yellow stains that are difficult to remove in the toilet, you can sprinkle with baking soda and soak in hot water for half an hour before washing. Remember to cover the water outlet on the inner edge of the toilet with toilet paper soaked in baking soda solution to achieve the purpose of soaking. The same goes for squatting toilets!
2. If conditions permit, you can remove the toilet lid and clean the gap.
3. Add some white vinegar to the water tank, which not only has the effect of disinfection and sterilization, but also removes the scale attached to the inner wall of the water tank.
Cleaning Bathroom Tiles
The joints of toilet tiles can easily turn yellow and black. Dip and use a toothbrush with washing powder, toothpaste or baking soda can effectively brush off stains. Remember to clean up water stains every time you use the bathroom!
Cleaning the Exhaust Fan
Exhaust fans can help keep the toilet dry, but because of the inconvenience of cleaning, it is often overlooked by us and becomes a place to hide dirt!
1. Remove the fan cover, soak it in soapy water and wash it, and then dry it.
2. Soak the rag in soapy water, wring it out, and carefully scrub the fan blades and vents. Finally wipe it with a dry towel.
3. Install the dried fan cover as it is.
Cleaning the Mirror
Bathroom mirrors are often stained with toothpaste, water stains and other things. At this time, you might as well use the leftover black tea bag to gently wipe the spots on the mirror, and then wipe it with a dry cloth to restore it to new.
Clean Rust Stains
The bathroom is damp. In case the metal utensils rust, you can cut the lemon in half, squeeze the lemon juice on the rust stains, soak for 10 minutes, brush off with a brush, and finally clean it with clean water.
There are many bottles and cans in the bathroom. You can apply a layer of nail polish on the bottom of the rust-prone material in advance to prevent rust.
This article introduces the three main components of the faucet. It will help you to understand the quality and material of faucets we use everyday. Uncover all the mysteries of the faucet.
Part 1: Composition
The three most basic components of a faucet: main body, plating and cartridge.
01 Main Body
The main body is the torso part of the faucet. The water flows in and out of the main body all the time. So the material is important. It determines the water quality.
Copper Alloy Faucet
Copper alloy is currently recognized as the most suitable main material for home use faucet, and the mainstream is brass. On the one hand, copper has good machinability, fluidity and formability. On the other hand, because copper ions have a bactericidal effect, they can kill super bacteria such as MRSA within 30 minutes and prevent the bacteria from producing antibodies. The inner wall of the copper faucet will not breed bacteria and become the most suitable carrier for "water".
According to different proportions of copper content in copper alloys, copper alloy materials can be divided into 52, 55, 59 and 62 copper. Among them, 59 copper is the best. The content of copper metal is 58%-60%, the content of lead metal is 0.08%-0.2%, and the content of other elements is about 2%. The remaining metal is basically zinc.
Because lead metal will precipitate when water enters the faucet, it will pollute the water. If the lead content is too high, it is harmful to the human body. Therefore, some brand faucets use low-lead copper, that is, the lead content is less than 0.1%. In view of the fact that it is difficult for general consumers to judge the lead content, it is recommended to choose a faucet with a clear mark that uses low-lead copper.
Zinc Alloy Faucet
Zinc alloy is an alloy based on zinc and added with other elements such as aluminum, copper, magnesium, cadmium, lead, and titanium. Zinc alloy is easily corroded in water. After being corroded, the metal will be mixed into the water and cause harm to the human body. The biggest advantage is probably the low price.
Stainless Steel Faucet
The main components of steel are iron and carbon. Ordinary carbon steel is easy to rust. Adding chromium, nickel and other metals to carbon steel can make the steel corrosion resistant. Therefore, the most important factor affecting the corrosion resistance of stainless steel is the content of chromium.
Stainless steel has the advantages of acid resistance, alkali resistance, corrosion resistance, and no release of harmful substances (lead). But compared with copper, it has one of the biggest drawbacks, that is, it does not have antibacterial function.
If the budget is sufficient, choose low-lead copper faucets. If you can't identify whether it is low-lead copper, choose a product from a big brand.
If you have a small budget, you can choose stainless steel faucets. The price will be cheaper. However, relatively there will be some problems. In particular, we must choose products from high standard manufacturers. After all, it's about your own health, don't be greedy for cheap.
The faucet is used in a humid environment, and its surface requires a good finish. The common surface treatment method on the market is electroplating, mainly including chrome plating, nickel plating, titanium plating and so on. In addition, there are some rarer methods such as baking varnish, porcelain, and imitation gold electrophoretic paint.
Chrome plating is the most common faucet plating. Chromium is a white metal with a bluish color, which has high hardness and wear resistance. Its hardness exceeds even the hardest quenched steel, second only to diamond.
Chromium is not easy to change in a humid environment and can maintain the surface gloss for a long time. With a silver appearance, chrome-plated faucets are more popular with consumers.
Nickel can quickly form a very thin passivation film on the surface of the faucet. Can resist the corrosion of water vapor and certain acids. Has excellent corrosion resistance and stability. Can resist the corrosion of water vapor and certain acids. Therefore, the stability of the nickel layer in a humid environment is very high.
Titanium alloys are made by adding aluminum and tin elements or aluminum and vanadium elements to titanium. Electroplated titanium gold has the advantages of high strength, low density, strong toughness and good corrosion resistance. The surface of the titanium-plated faucet is as smooth as a mirror. Its golden luster looks elegant and rich, and very decorative. However, the process of plating titanium gold is complicated. It is very easy to absorb impurities during thermal processing. Therefore, the yield is low. The cost is also higher.
Baking varnish is to put two layers of coating on the faucet. Each time the paint is applied, it is sent to a dust-free constant temperature baking paint room for electric heating or far-infrared high temperature baking.
The surface of the baking varnish faucet is smooth and shiny, which can present a visual texture similar to that of a piano, making the whole product look very high-grade. However, compared with other surface treatment methods, baking varnish faucets are more prone to surface peeling. The durability is not as good as the traditional chrome-plated faucet. This method is not widely used.
This treatment will make the surface of the faucet visually rough. However, it is quite delicate to the touch, showing a restrained beauty. The brushed process mainly relies on mechanical friction to produce several common textures such as straight lines, chaotic lines, threads, corrugations, swirling lines and intermittent silk lines on the surface of the faucet. It can also create matte, mirror, three-dimensional, embossed, satin and other effects.
Appropriate surface treatment can make the overall shape of the faucet rich and full. Choosing the right faucet can also become the finishing touch to the bathroom decoration. It is pleasing to the eye.
There are generally multiple layers of plating. There are also some cheap faucets that are only coated one layer. The coating is not as thick as possible, but just right. If the coating is too thin, it will not be able to prevent corrosion. If the coating is too thick, it is easy to peel off. Copper + nickel + chromium is best. Copper can provide excellent adhesion. Nickel makes the coating have excellent corrosion resistance. Chromium makes the surface bright and flawless, and it is hard and scratch-resistant. Further improving the corrosion resistance. In addition, the faucet that has passed the 48-hour professional salt spray test will be more guaranteed in terms of corrosion resistance. Aquacubic's products have passed these tests.
The cartridge is a part that realizes the basic functions of direction control, pressure control or flow control by means of the rotation of the valve stem. The water flow enters the main body of the faucet through the cartridge and finally leaves the water outlet. The faucet used at home is turned on and off countless times a day. It can be seen that the quality of the cartridge is also very important to the faucet.
The ceramic cartridge has less water pollution, good wear resistance and good sealing performance. Many high-quality faucets use ceramic cartridges. The ceramic chip must have good airtightness, stable physical properties, wear resistance, and long service life.
Stainless Steel Cartridge
The biggest advantage of the stainless steel cartridge is that it has a larger adjustable angle of rotation and is not easily affected by water quality. It is more practical to choose this type in areas with poor water quality. However, stainless steel has worse wear resistance compared to ceramic. After it is used for a long time, water leakage is prone to occur.
Roller cartridges are old-fashioned cartridges. No matter in terms of price, water pollution or life span, they are inferior to ceramics and have been phased out. There are very few roller cartridge faucets on the market.
Part 2: How to Buy ?
After understanding the most important parts of the faucet, let's take a look at the precautions when purchasing.
01 The Weight
Faucets made of brass are heavier. So you can make a preliminary judgment by weighing the faucet. However, many manufacturers can increase the weight of low-quality faucets through some methods. So here is a commonplace saying, for consumers who can't distinguish the material, it is better to choose the leading brands. This is the simplest selection method.
02 The Surface
In sufficient light, carefully observe the electroplated surface of the faucet. Good electroplating looks as bright as a mirror, without any oxidation spots and burn marks, no pores, no blistering, no plating leakage, no burrs to the touch. After pressing the faucet, the fingerprints will spread out quickly, and it is not easy to adhere to dirt.
Breathing out the surface of the faucet. For products with good electroplating quality, the water vapor will quickly and evenly fade away. If the quality is not good, the fading speed will be slower, or not fade. The faster and more even the water vapor fades, the better the quality.
03 After-sales Service
The after-sales service of the product is very important, and it is also the guarantee for you to have no worries. Be sure to buy products with good after-sales service. The general faucet is guaranteed for at least 5 years.
When choosing a faucet, the most important thing is to look at the material, plating and cartridge of the faucet. Because the material determines the safety of the water. The coating can increase the service life of the faucet, so that the faucet has scratch resistance, corrosion resistance, and the surface brightness will be better. The cartridge is the heart of the faucet. Generally high quality faucets use ceramic cartridges. It has the characteristics of strong wear resistance and good sealing performance.
Cleaning the bathroom is a very important and troublesome task. It is not like the kitchen with obvious large stains and greasy walls, but it is the wettest place in the house. If the cleaning is not in place, it is very easy to breed bacteria. Dust and stains in the bathroom are mostly on various sanitary wares in the space. Although it is not obvious, there are great hidden dangers, such as faucets, toilets, showers, floor drains, shower curtains and so on.
In order to have a clean and hygienic space, this time we will share some simple ways to clean the bathroom. Make your bathroom clean and tidy, and make cleaning fast and easy.
01 Clean the Faucet
Frequent use of the faucet causes water stains to accumulate and looks dirty. What should we do?
You can apply toothpaste to the faucet, wipe it with a damp cloth, and rinse it off.
If you want to restore the faucet to the previous brightness, you can also wipe it with orange peel on the surface of the faucet, and then dry it with a clean soft cloth. This is because orange peel contains fruit acid, which can maintain the surface of stainless steel and make the faucet look new.
02 Cleaning the Mirror
Do bathroom mirrors also need to be washed? If the mirror is used for a long time, it will feel that there is a thin layer of "fog" on it, which causes the mirror surface to be not clear enough. If so, it means it's time to wash your mirror!
To clean the mirror, you can use vinegar, toothbrush, soap:
1. Use a cloth dipped in vinegar to wipe the mirror. The water stains on the mirror are alkaline, which can neutralize the acetic acid in the vinegar, so that the mirror shines as new.
2. Use toothpaste to scrub the mirror, it can also ensure that the mirror is clean and bright
3. Household soap to wipe the mirror surface is also effective in restoring the clarity of the mirror.
Finally, after cleaning the mirror, remember to wipe off the water drops on the mirror surface with a dry cloth or paper towel to prevent water stains from leaving water marks on the mirror surface.
03 Clean the toilet
How can the cleanliness of the bathroom be missing the toilet? Those places that the toilet brush can't reach are the depressing existences. In fact, it is not difficult to solve the dirt on the inner corners of the toilet.
Mix white vinegar and baking soda at a ratio of 1:1 to make a cleanser. Spray it around the toilet and let it stand for 30 minutes. The stains will be washed away, which is more than a toilet cleaner.
Spray it before starting to build the bathroom, and when other hygiene is done, the toilet can be flushed.
04 Cleaning Tiles
The ceramic tiles will become yellow and black due to long-term water stains and bath products impregnation. How can the stains be easily brushed?
Mix vinegar and water in a ratio of 1:1 and spray it on the tiles. Spray more on the moldy areas. When it is air-dried naturally, rinse them with clean water.
05 Clean the Shower
After the shower has been used for a long time, a lot of scale will accumulate on the water outlet. It is not only ugly, but also blocks the water outlet. And it will breed bacteria, so the cleaning of the shower must not be ignored.
The cleaning of the shower head is very simple. Just take a plastic knife, pour some white vinegar (to submerge the shower head), wrap the shower head and fix it with a rubber band. After soaking for 1 hour, turn on the flushing water, and the scale can be cleaned. At the same time, white vinegar also has the effect of disinfection and sterilization, which can kill two birds with one stone.
In addition to stains in the bathroom, there is also an unpleasant odor. The bathroom with a "weird" smell is the most intolerable!
06 Toilet Deodorization
If you want to remove the smell in the bathroom, you can do this!
1. Pour white vinegar into the floor drain, wait for 3-5 minutes, pour the mixed solution of water and baking soda into the floor drain. The soda solution and the white acetic acid alkali will be neutralized. It can quickly eliminate the smell of the floor drain.
2. Slice the fresh lemon and put it in the bathroom to prevent mildew and odor.
3. Put a cup of balsamic vinegar. The smell of the bathroom will disappear. But the balsamic vinegar should be changed regularly, like once a week.
After learning these tricks, clean up your bathroom as soon as possible. The bathroom will feel like a brand new one.
Pink is considered the exclusive color of girls, and many people can't resist its unique tenderness and romance.
Pink is soft and compatible. It is a very versatile color. When used properly, it can add a unique texture to the space. It now occupies a very special place in home design.
For the pink bathroom space, how can it be decorated to be unconventional?
Combine Pink and Tiles
Worried that too much pink will look tacky? Then add the tile. The large pink walls are matched with tiles of different textures to make the bathroom richer, playful and unique.
Choose bright chrome bathroom accessories in the space to completely blend into the pink space. Towel bar, towel ring, storage basket, soap dish... a full set of configuration. Make the bathroom tidy and clean.
Pink Matches with Other Colors.
Pink is a very tolerant color. Green, which seems difficult to match, is combined with pink. A warm and cold mixed hue makes the space more fresh without any uncomfortable impact.
The sweet pink is matched with the black metal bathroom accessories. The calm black effectively neutralizes the sweetness of the large pink.
The black bathroom accessories with a strong sense of line give the space a sense of high quality.
Embellish the bathroom with pink, soft and not monotonous, elegant and vigorous. Let the space bloom with a different kind of charm.
Aquacubic Solid Brass Matt Black Concealed Overhead Rain Shower Faucet with Hand Shower.
Waterfall shower head uses air pressure technology and can provide stable and powerful showers even at low water pressure.
Manufactured from premium material with outstanding corrosion resistant performance for ensuring high quality and better durability.
Ceramic sink is a kind of household goods. There are many kinds of sink materials, such as cast iron enamel, ceramics,
steel plate enamel, artificial stone, acrylic, crystal stone flume, etc. Most bathroom sinks are made from firecaly.
Ceramic sink is a kind of water sink which is made by integrated molding and firing. Its main body is mainly white.
It has the advantages of high temperature resistance, easy cleaning and aging resistance.
It can be wiped clean with cloth or clean metal ball in daily cleaning.
Step Ⅰ. Grouting
The production of ceramic sink is generally made by grouting.
The slurry is poured into a fixed die and allowed to solidify.
Step Ⅱ. Spraying Glaze
It is necessary to prepare qualified glaze slurry. Spray it on the surface of sink body.
Vitrify it into porcelain after firing; cover it on the surface.
Step Ⅲ. Forming
Forming is a drying process.
The process of further dehydration of semi-finished products.
Step Ⅳ. Preparation for Furnace
This is an important step before burning.
Workers need to check the surface & quality of the sinks and lay them together in trolley.
Step Ⅴ. Burning
Put the products on the kiln car according to certain proportion.
Based on the given temperature curve, sink will form finally.
Step Ⅵ. Storage & Logistic
With the development of storage & logistics industry,
we developed a complete solution for big size cargos.