Sanitary Waterfall Centerset Faucet- China Manufacturers Suppliers Factory

When decorating kitchens and bathrooms, many people worry about whether to choose an above counter sink or an under counter sink. The above counter sink and the under counter sink have their own advantages and disadvantages. Which one to choose depends on your own preferences.

There is a difference between the definition of the above counter sink and the under counter sink in the kitchen and bathroom, we will analyze them separately.

 

Kitchen Sinks

Above Counter Sink:

Above counter sink installation is the most common and simplest. The opening size of the countertop is slightly smaller than the size of the sink, so that the sink can be placed on the countertop, and then a circle of glass glue can be applied around it.

 

Advantage

The above counter sink is easy to install, and there is no need to worry about deguming if the load is too heavy. It is also convenient to change the sink later, just scrape off the glass glue and replace the sink. The space left under the sink can be about 3 cm higher than the under counter sink.

Disadvantage

It is inconvenient to clean the countertop in future use. The sides of the sink and the countertop are sealed with glass glue. After a long time, the glass glue is easy to mold and turn black.

Under Counter Sink:

There are also two ways to install the under counter sink. One is to make a hole on the counter slightly smaller than the outer edge of the sink. The other is to cut a hole according to the inner edge of the sink.

 

Advantage

The under-counter sink is very easy to take care of, and the countertop is easy to clean. It is integrated with the countertop and more concise.

 

Disadvantage

Relatively speaking, the installation of the under-counter sink is more troublesome. The gap between the countertop and the sink is bonded with a strong adhesive. If you want to replace the sink, you may need to replace the countertop as well. In addition, no matter how strong the glue is, and the load-bearing capacity is uncertain, there is a risk of falling from the counter. General washing and  load-bearing of pots and pans will not cause problems.

 

Bathroom Basins

 

Above Counter Basin

The basin above the countertop is called the above counter basin. The installation of the above counter basin is relatively simple, just cut a hole on the countertop according to the installation drawing. Then place the basin in the hole and fill the gap with glass glue.

 

Advantage

Above counter basins are more beautiful in shape and have a wide variety of types. You can choose according to your favorite style. Easy to install and remove. If you want to replace it with a new basin, you can directly remove it and install a new one.

 

Disadvantage

One is that it is troublesome to clean the countertop, and there is a hygienic corner between the basin and the wall. The second is that the glass glue is used to bond the basin and the countertop, and the glass glue is easy to turn black or mildew after a long time.

Under Counter Basin

 

Advantage

The biggest advantage is that it is easy to clean, and there will be no hygienic dead angle. The basin area is more clean and tidy.

 

Disadvantage

Similar to the kitchen sink, it is still a problem of installation and replacement. And the style of the under-counter basin is fixed, so it is impossible to make more choices in the shape.

 

In summary, the above counter basin and the under counter basin have their own advantages and disadvantages. Simply put, people who want to clean more easily can choose under counter basins in both the kitchen and the bathroom. For the convenience of installation and replacement, or for those who have styling requirements for the bathroom, an above counter basin can be selected.

Cleaning the bathroom is a very important and troublesome task. It is not like the kitchen with obvious large stains and greasy walls, but it is the wettest place in the house. If the cleaning is not in place, it is very easy to breed bacteria. Dust and stains in the bathroom are mostly on various sanitary wares in the space. Although it is not obvious, there are great hidden dangers, such as faucets, toilets, showers, floor drains, shower curtains and so on.

In order to have a clean and hygienic space, this time we will share some simple ways to clean the bathroom. Make your bathroom clean and tidy, and make cleaning fast and easy.

 

01 Clean the Faucet

Frequent use of the faucet causes water stains to accumulate and looks dirty. What should we do?

You can apply toothpaste to the faucet, wipe it with a damp cloth, and rinse it off.

 

If you want to restore the faucet to the previous brightness, you can also wipe it with orange peel on the surface of the faucet, and then dry it with a clean soft cloth. This is because orange peel contains fruit acid, which can maintain the surface of stainless steel and make the faucet look new.

 

02 Cleaning the Mirror 

Do bathroom mirrors also need to be washed? If the mirror is used for a long time, it will feel that there is a thin layer of "fog" on it, which causes the mirror surface to be not clear enough. If so, it means it's time to wash your mirror!

To clean the mirror, you can use vinegar, toothbrush, soap: 

1. Use a cloth dipped in vinegar to wipe the mirror. The water stains on the mirror are alkaline, which can neutralize the acetic acid in the vinegar, so that the mirror shines as new.

2. Use toothpaste to scrub the mirror, it can also ensure that the mirror is clean and bright

3. Household soap to wipe the mirror surface is also effective in restoring the clarity of the mirror.

 

Finally, after cleaning the mirror, remember to wipe off the water drops on the mirror surface with a dry cloth or paper towel to prevent water stains from leaving water marks on the mirror surface.

03 Clean the toilet 

How can the cleanliness of the bathroom be missing the toilet? Those places that the toilet brush can't reach are the depressing existences. In fact, it is not difficult to solve the dirt on the inner corners of the toilet.

Mix white vinegar and baking soda at a ratio of 1:1 to make a cleanser. Spray it around the toilet and let it stand for 30 minutes. The stains will be washed away, which is more than a toilet cleaner.

Spray it before starting to build the bathroom, and when other hygiene is done, the toilet can be flushed.

 

04 Cleaning Tiles 

The ceramic tiles will become yellow and black due to long-term water stains and bath products impregnation. How can the stains be easily brushed?

Mix vinegar and water in a ratio of 1:1 and spray it on the tiles. Spray more on the moldy areas. When it is air-dried naturally, rinse them with clean water.

 

05 Clean the Shower 

After the shower has been used for a long time, a lot of scale will accumulate on the water outlet. It is not only ugly, but also blocks the water outlet. And it will breed bacteria, so the cleaning of the shower must not be ignored.

The cleaning of the shower head is very simple. Just take a plastic knife, pour some white vinegar (to submerge the shower head), wrap the shower head and fix it with a rubber band. After soaking for 1 hour, turn on the flushing water, and the scale can be cleaned. At the same time, white vinegar also has the effect of disinfection and sterilization, which can kill two birds with one stone.

 

In addition to stains in the bathroom, there is also an unpleasant odor. The bathroom with a "weird" smell is the most intolerable!

 

06 Toilet Deodorization 

If you want to remove the smell in the bathroom, you can do this!

1. Pour white vinegar into the floor drain, wait for 3-5 minutes, pour the mixed solution of water and baking soda into the floor drain. The soda solution and the white acetic acid alkali will be neutralized. It can quickly eliminate the smell of the floor drain.

2. Slice the fresh lemon and put it in the bathroom to prevent mildew and odor.

3. Put a cup of balsamic vinegar. The smell of the bathroom will disappear. But the balsamic vinegar should be changed regularly, like once a week.

After learning these tricks, clean up your bathroom as soon as possible. The bathroom will feel like a brand new one.

This article introduces the three main components of the faucet. It will help you to understand the quality and material of faucets we use everyday. Uncover all the mysteries of the faucet.

 

Part 1: Composition

The three most basic components of a faucet: main body, plating and cartridge.

01 Main Body

The main body is the torso part of the faucet. The water flows in and out of the main body all the time. So the material is important. It determines the water quality.

 

Copper Alloy Faucet

Copper alloy is currently recognized as the most suitable main material for home use faucet, and the mainstream is brass. On the one hand, copper has good machinability, fluidity and formability. On the other hand, because copper ions have a bactericidal effect, they can kill super bacteria such as MRSA within 30 minutes and prevent the bacteria from producing antibodies. The inner wall of the copper faucet will not breed bacteria and become the most suitable carrier for "water".

 

According to different proportions of copper content in copper alloys, copper alloy materials can be divided into 52, 55, 59 and 62 copper. Among them, 59 copper is the best. The content of copper metal is 58%-60%, the content of lead metal is 0.08%-0.2%, and the content of other elements is about 2%. The remaining metal is basically zinc.

 

Because lead metal will precipitate when water enters the faucet, it will pollute the water. If the lead content is too high, it is harmful to the human body. Therefore, some brand faucets use low-lead copper, that is, the lead content is less than 0.1%. In view of the fact that it is difficult for general consumers to judge the lead content, it is recommended to choose a faucet with a clear mark that uses low-lead copper.

 

Zinc Alloy Faucet

Zinc alloy is an alloy based on zinc and added with other elements such as aluminum, copper, magnesium, cadmium, lead, and titanium. Zinc alloy is easily corroded in water. After being corroded, the metal will be mixed into the water and cause harm to the human body. The biggest advantage is probably the low price.

 

Stainless Steel Faucet

The main components of steel are iron and carbon. Ordinary carbon steel is easy to rust. Adding chromium, nickel and other metals to carbon steel can make the steel corrosion resistant. Therefore, the most important factor affecting the corrosion resistance of stainless steel is the content of chromium.

 

Stainless steel has the advantages of acid resistance, alkali resistance, corrosion resistance, and no release of harmful substances (lead). But compared with copper, it has one of the biggest drawbacks, that is, it does not have antibacterial function.

 

Brief Summary

If the budget is sufficient, choose low-lead copper faucets. If you can't identify whether it is low-lead copper, choose a product from a big brand.

If you have a small budget, you can choose stainless steel faucets. The price will be cheaper. However, relatively there will be some problems. In particular, we must choose products from high standard manufacturers. After all, it's about your own health, don't be greedy for cheap.

 

 

02 Plating

The faucet is used in a humid environment, and its surface requires a good finish. The common surface treatment method on the market is electroplating, mainly including chrome plating, nickel plating, titanium plating and so on. In addition, there are some rarer methods such as baking varnish, porcelain, and imitation gold electrophoretic paint.

 

Chrome

Chrome plating is the most common faucet plating. Chromium is a white metal with a bluish color, which has high hardness and wear resistance. Its hardness exceeds even the hardest quenched steel, second only to diamond.

Chromium is not easy to change in a humid environment and can maintain the surface gloss for a long time. With a silver appearance, chrome-plated faucets are more popular with consumers.

 

Nickel

Nickel can quickly form a very thin passivation film on the surface of the faucet. Can resist the corrosion of water vapor and certain acids. Has excellent corrosion resistance and stability. Can resist the corrosion of water vapor and certain acids. Therefore, the stability of the nickel layer in a humid environment is very high.

Titanium Alloy

Titanium alloys are made by adding aluminum and tin elements or aluminum and vanadium elements to titanium. Electroplated titanium gold has the advantages of high strength, low density, strong toughness and good corrosion resistance. The surface of the titanium-plated faucet is as smooth as a mirror. Its golden luster looks elegant and rich, and very decorative. However, the process of plating titanium gold is complicated. It is very easy to absorb impurities during thermal processing. Therefore, the yield is low. The cost is also higher.

 

Baking Varnish

Baking varnish is to put two layers of coating on the faucet. Each time the paint is applied, it is sent to a dust-free constant temperature baking paint room for electric heating or far-infrared high temperature baking.

The surface of the baking varnish faucet is smooth and shiny, which can present a visual texture similar to that of a piano, making the whole product look very high-grade. However, compared with other surface treatment methods, baking varnish faucets are more prone to surface peeling. The durability is not as good as the traditional chrome-plated faucet. This method is not widely used.

 

Brushed

This treatment will make the surface of the faucet visually rough. However, it is quite delicate to the touch, showing a restrained beauty. The brushed process mainly relies on mechanical friction to produce several common textures such as straight lines, chaotic lines, threads, corrugations, swirling lines and intermittent silk lines on the surface of the faucet. It can also create matte, mirror, three-dimensional, embossed, satin and other effects.

 

Brief Summary

Appropriate surface treatment can make the overall shape of the faucet rich and full. Choosing the right faucet can also become the finishing touch to the bathroom decoration. It is pleasing to the eye.

There are generally multiple layers of plating. There are also some cheap faucets that are only coated one layer. The coating is not as thick as possible, but just right. If the coating is too thin, it will not be able to prevent corrosion. If the coating is too thick, it is easy to peel off. Copper + nickel + chromium is best. Copper can provide excellent adhesion. Nickel makes the coating have excellent corrosion resistance. Chromium makes the surface bright and flawless, and it is hard and scratch-resistant. Further improving the corrosion resistance. In addition, the faucet that has passed the 48-hour professional salt spray test will be more guaranteed in terms of corrosion resistance. Aquacubic's products have passed these tests.

 

03 Cartridge

The cartridge is a part that realizes the basic functions of direction control, pressure control or flow control by means of the rotation of the valve stem. The water flow enters the main body of the faucet through the cartridge and finally leaves the water outlet. The faucet used at home is turned on and off countless times a day. It can be seen that the quality of the cartridge is also very important to the faucet.

Ceramic Cartridge

The ceramic cartridge has less water pollution, good wear resistance and good sealing performance. Many high-quality faucets use ceramic cartridges. The ceramic chip must have good airtightness, stable physical properties, wear resistance, and long service life.

 

Stainless Steel Cartridge

The biggest advantage of the stainless steel cartridge is that it has a larger adjustable angle of rotation and is not easily affected by water quality. It is more practical to choose this type in areas with poor water quality. However, stainless steel has worse wear resistance compared to ceramic. After it is used for a long time, water leakage is prone to occur.

 

Roller Cartridge

Roller cartridges are old-fashioned cartridges. No matter in terms of price, water pollution or life span, they are inferior to ceramics and have been phased out. There are very few roller cartridge faucets on the market.

 

Part 2: How to Buy ?

After understanding the most important parts of the faucet, let's take a look at the precautions when purchasing.

 

01 The Weight

Faucets made of brass are heavier. So you can make a preliminary judgment by weighing the faucet. However, many manufacturers can increase the weight of low-quality faucets through some methods. So here is a commonplace saying, for consumers who can't distinguish the material, it is better to choose the leading brands. This is the simplest selection method.

02 The Surface

In sufficient light, carefully observe the electroplated surface of the faucet. Good electroplating looks as bright as a mirror, without any oxidation spots and burn marks, no pores, no blistering, no plating leakage, no burrs to the touch. After pressing the faucet, the fingerprints will spread out quickly, and it is not easy to adhere to dirt.

 

Breathing out the surface of the faucet. For products with good electroplating quality, the water vapor will quickly and evenly fade away. If the quality is not good, the fading speed will be slower, or not fade. The faster and more even the water vapor fades, the better the quality.

03 After-sales Service

The after-sales service of the product is very important, and it is also the guarantee for you to have no worries. Be sure to buy products with good after-sales service. The general faucet is guaranteed for at least 5 years.

 

When choosing a faucet, the most important thing is to look at the material, plating and cartridge of the faucet. Because the material determines the safety of the water. The coating can increase the service life of the faucet, so that the faucet has scratch resistance, corrosion resistance, and the surface brightness will be better. The cartridge is the heart of the faucet. Generally high quality faucets use ceramic cartridges. It has the characteristics of strong wear resistance and good sealing performance.

Pink is considered the exclusive color of girls, and many people can't resist its unique tenderness and romance.

Pink is soft and compatible. It is a very versatile color. When used properly, it can add a unique texture to the space. It now occupies a very special place in home design.

For the pink bathroom space, how can it be decorated to be unconventional?

Combine Pink and Tiles

Worried that too much pink will look tacky? Then add the tile. The large pink walls are matched with tiles of different textures to make the bathroom richer, playful and unique.

Choose bright chrome bathroom accessories in the space to completely blend into the pink space. Towel bar, towel ring, storage basket, soap dish... a full set of configuration. Make the bathroom tidy and clean.

Pink Matches with Other Colors.

Pink is a very tolerant color. Green, which seems difficult to match, is combined with pink. A warm and cold mixed hue makes the space more fresh without any uncomfortable impact.

The sweet pink is matched with the black metal bathroom accessories. The calm black effectively neutralizes the sweetness of the large pink.

The black bathroom accessories with a strong sense of line give the space a sense of high quality.

Embellish the bathroom with pink, soft and not monotonous, elegant and vigorous. Let the space bloom with a different kind of charm.

Aquacubic Solid Brass Matt Black Concealed Overhead Rain Shower Faucet with Hand Shower. 

Waterfall shower head uses air pressure technology and can provide stable and powerful showers even at low water pressure.

Manufactured from premium material with outstanding corrosion resistant performance for ensuring high quality and better durability.

Of course it does.

 

What is a wall-mount faucet?

The wall-mounted faucet is to install the water supply pipe in the wall. The faucet is independent, and the wash basin is also independent. The washbasin does not need to be connected with the faucet, so there are more free choices in the washbasin shape. There are more diversified washbasin choices in different spaces and environments. 

The place where the washbasin and the faucet are connected is usually the place where rust and bacteria breed the most. With separate faucets and wash basins, you don't have to worry about cleaning these locations.

 

Two Types of Wall-mounted Faucets.

 

Single Handle

1. Single Handle Single Hole Wall-mount Mixer Faucet

 

2. Single Handle Double Hole Wall-mount Mixer Faucet

 

3. Single Handle Wall-mount Mixer Faucet with Rough-in Valve

 

Double Handle

 

Double handle wall-mount faucet means that the hot and cold water are controlled separately. The left is hot and the right is cold, and the water outlet is in the middle. The copper color part in the picture is the concealed part.

The above are several common wall-mount faucets.

Advantages and Disadvantages of Wall-mount Faucet

Advantages:

1. Save space. In-wall faucets generally save space and free up space on the countertop.

2. Easy to clean. It is more convenient to clean the countertop.

3. It is highly decorative. It can increase the diversity of bathroom decoration and make the space more tidy.

 

Disadvantages:

1. The price is more expensive. The price and installation cost of the wall-mounted faucet is higher than that of the ordinary faucet.

2. Trouble with installation. Need to ask professional installers to install.

3. Trouble with maintenance. Many parts are installed in the wall. So if something goes wrong, it will be troublesome to repair.

 

Precautions for the Installation of In-wall Faucets.

1. Due to the concealed installation, the wall-mounted faucet must be installed in the wall together with the water pipe during decoration. Therefore, it is necessary to choose the faucet style before the decoration.

2. Do not remove the protective cover of the product during the decoration construction process to avoid damage to the product.

3. Be sure to pressurize the product to test whether it leaks. Make sure that the water pipe is connected correctly.

4. The sundries at the connection must be removed before installation to avoid blockage or water leakage.

5. The installation height is best controlled at a height of 15~20cm above the basin. The height above the ground is 95cm~100cm.

6. After installing the faucet, attach the wall tiles, etc.

So should you choose an in-wall faucet?

1. The wall-mounted faucet has high appearance and can be matched with various decoration styles according to your own preferences.

2. The wall-mounted faucet has a miraculous effect when used in a bathroom with a relatively compact space, which can save a lot of space.

 

3. The main concern for the wall-mounted faucet is maintenance, worrying about water leakage. In fact, the wall-mounted faucet is similar to the shower at home. The technology is very mature. It's already very popular.

 

We can make a comparison with ordinary faucets:

1. The connection method is different: ordinary faucet is connected to the water outlet through angle valve and hose to supply water. The wall-mounted faucet is connected to the water outlet through the concealed part to supply water. The concealed part and the water outlet are installed as a whole. As far as the connection method is concerned, there are fewer steps for the wall mount faucet.

 

2. Different accessories: common faucet accessories are angle valve, hose and faucet. The wall-mounted faucet accessories are concealed parts and faucets. Because there are no fittings such as angle valves and hoses, the possibility of water leakage from the faucet is lower.

The more complicated the connection method, the more connection points, the more hidden dangers. The hidden danger of in-wall faucets is actually smaller.

So you can buy the wall-mounted faucet with confidence. Ask a professional to install it. There is no problem.

After installation, its usefulness depends on the size of the basin and bathtub. Therefore, when purchasing, you must first know the distance between the basin / the bathtub and the wall. When selecting a wall mount faucet, the length of its spout must be selected correctly. The spout of the faucet should not be close to the edge of the basin or bathtub, otherwise it will affect the convenience of use. It is best to choose a faucet made of copper and a ceramic valve core, because of its good sealing performance, wear resistance, corrosion resistance and oxidation resistance.

1. Material:

The common faucet materials on the market today are: stainless steel, plastic, brass, zinc alloy faucet, etc. 

Brass:

Brass is the most common material for faucet manufacturing. It is made of international standard H59/H62 copper. The casting adopts steel mold for gravity casting, and its wall thickness is uniform, generally 2.5-3.0 mm. The faucet made of brass is characterized by: no rust, durability, anti-oxidation, and sterilization effect on water.

Zinc Alloy:

The density of zinc alloy is lower than that of copper, and the handle is lighter. The surface of zinc alloy is easy to oxidize from the inner wall, and white oxide powder will appear on the surface. The strength is much worse than that of copper. The service life is not long, and the lead content is high.  After one to two years, the faucet made of zinc alloy will oxidize and rot.

Plastics:

Plastic faucet has the characteristics of corrosion resistance, aging resistance, no rust, lead-free, non-toxic, odorless, high pressure resistance, light weight, easy construction, and low price. Plastic is not wear resistant.

Stainless Steel:

Now health and environmental protection has gradually become the new themes of modern life. Stainless steel is an internationally recognized healthy material that can be implanted into the human body. Therefore, kitchen and bathroom products with stainless steel as the main material have begun to become popular in European and American countries. 

More than 90% of high-end faucets are made of brass. Brass is the most suitable faucet material and has antibacterial effect. Among them, H59 copper is most used. Its lead content is qualified. H62 copper’s lead content is less and more corrosion-resistant. Although stainless steel can be lead-free, but the quality is worse than copper due to the complex process and no antibacterial performance.

2. Faucet Manufacturing Process:

Most of the faucets on the market under $20 are made of sand mold casting, which is commonly referred to as "sand foundry". The internal structure of the valve body metal is loose, and it is easy to form interior defects such as stomata. It may not be found in appearance. However, after a period of use, defects such as water leakage, inadequate sealing and even more severe defects will occur. High-grade faucets usually adopt gravity casting, and the internal structure of the valve body metal is dense. For the same valve body, the weight of the products produced by the two processes is different, and the consumption of materials is also different. The weight difference between gravity casting valve body and sand casting valve body is about 1/4. Therefore, the same product has different prices.

3. Cartridge:

The faucet is turned on and off every day. The cartridge determines the service life of the faucet. At present, ceramic is the most suitable material for home use. The high-end faucet cartridge mostly uses ceramic, which is durable and can be opened and closed for 500000 times without leakage.

 

4. Water Hose:

The water inlet hose of the high-end faucet adopts pure 304 stainless steel. 304 stainless steel can bear high water pressure and ensure water purity.

 

5. Aerator:

The aerator of high-end faucet can give users a very comfortable bathing feel. The use of these accessories and materials can ensure the quality of the product. And whether or not to use the NEOPERL aerator is an important factor in judging the quality of the faucet.

 

6. Surface Technology:

The electroplated surface of high-priced faucets usually has a mirror-like feel. When you press it with your finger, the traces of hand prints will disappear immediately. Moreover, advanced environmental protection electroplating technology can prevent secondary pollution of products and ensure the purity of water.

 

7. Service Life:

The quality of high-end faucets is still good after 5 years of use, and meet all the national water-saving requirements. The durability, water-saving and environmental protection are its highlight value. Cheap faucets have a very short service life. After two or three months of use, quality issue may occur. And their safety is low.

 

8. After-sale Warranty:

High-end faucets are produced by professional manufacturers with a comprehensive after-sales service system. No matter the product has an accident or failure, the manufacturer or distributor will be responsible for solving it at any time. The manufacturers that provides higher price products are mostly more qualified, and they are very concerned about sales and reputation generated by each product.

All Aquacubic products that are finished in the production department have to pass their inspection first. There will also be the special inspection personnel to conduct an additional inspection to ensure that every product delivered to consumers is qualified. 

Ideal life starts here.

 

Home, as a refueling station for happiness, is not just a place to rest, but a pleasant space that carries our stories and emotions. So it must be comfortable enough to be lazily for a whole day; it must be sunny enough to bloom every day's good mood; it must be warm enough to speed up our pace of going home. 

The ideal life can start from creating a comfortable bathroom. The comfort of the bathroom space is related to the quality of life and the pleasant mood of the day. If the decoration is not good, how to start a happy life?

 

The morning starts from washing in the bathroom, ushering in a good time of the day; the relaxing moment when you go home after a day of work, and the hearty bathing, will restore your vitality to yourself.

Speaking of bathroom, the first thing many people think of is that we must separate wet and dry functions. After all, the traditional integrated type is too inconvenient to use. The bathroom is always wet, and even the towels have a musty smell. With the improvement of people's living standards, more and more people hope that the bathroom can be truly hygienic.

 

Three-way separation, that is, the basin area, shower area and toilet area are completely separated.

Advantages of three-way separation:

First, each washing area is an independent space, ensuring privacy while isolating smell and humidity;

Second, improve safety, especially for families with the elderly and children, and reduce the possibility of slipping due to water in the bathroom;

Third, ensure the cleanliness of the bathroom, and extend the service life.

 

How to create a three-way separation for a 3 square meter bathroom?

 

Square Layout

As soon as you enter the room, it is the washing area, which is the most frequently used area in the entire bathroom, so placing it at the door does not affect the use of other areas.

 

The middle position is the toilet area. The small toilet is separated by a baffle to form an independent space. If you feel that it is not private enough, you can install a small shower curtain to completely separate the toilet area. This is generally not recommended. After all, it affects the appearance, and it also gives people the feeling of being cramped.

 

The square space uses all the walls. A few niches or horizontal partitions are placed on one end of the bathtub to hold bath towels and clothes. The bath area is designed in the innermost part, the edge of the bathtub itself is an isolation belt, and the shower head is installed on the wall at the other end of the bathtub, which is convenient and does not take up space.

 

Although the square space is not very easy to handle, it can be regarded as "excellent brushwork" through this elaborate design.

 

Rectangular Layout

Compared with a square bathroom, a rectangular space will make the best use of everything.

The same is the wash area next to the door. The difference is that the rectangular space also has a place to put the washing machine. When you take a shower, you can throw your clothes into the washing machine.

Placing the toilet and shower in parallel on the innermost side and covering the tub with a shower curtain.

 

The above are two designs of 3 square meters bathroom. Of course, there are more design styles, such as a sliding folding door instead of a shower curtain.

 

This folding door design not only saves space, but also has good privacy. Very practical. 

With some simple lighting, the bathroom can also be a beautiful scenery. 

The barn door design completely separates the bathroom area.

 

Bathtub

A small bathroom doesn't necessarily need a bathtub. But if removing the wall partition and replace it with a shower curtain, there will be  bathtub area.

Shower Room

The shower room can be placed in the triangular area at the corner of the bathroom to form a fan-shaped area, which is the most space-saving.

 

Toilet

It is best to use a small size. After all, if the toilet is too big, it doesn't seem to be of much use except for taking up space.

What are the precautions for the three-way separation?

 

Color Tone

Because the space is relatively small, the tones of the floor tiles and the walls should be matched reasonably. It is best to focus on warm colors, which are swelling colors. They have the effect of "expanding" the space.

 

Mirror

Try to choose a mirror as large as possible. The role of a large mirror is the same as the color tone, which increases the sense of space.

 

Storage

The corners must not be wasted. Simple wooden shelves and niches are good storage methods.

 

Ventilation

The last thing we must pay attention to is ventilation. It is important to reduce odors. 

Silicone Kitchen Faucet Mat For Sink Sponge Drain Rack Foldable Sink Mat Faucet. ￡11.00. Free P

Kitchen Sink Sprayer, Faucet Spray Head Replacement with 79” Recoil Hose and Holder, …

9/6/2022· VALISY Modern Solid Brass 2-Handle 3 Hole Widespread Matte Black Bathroom Sink Faucet, Lavatory Vanity Sink Faucets Set Deck Mount with Water Hoses and Pop-up Drain Product Description

Newest Stainless Steel Topmount 50/50 Kitchen Sink, Find Details and Price about Kitchen …

Browse Widespread Bathroom Faucets by style, finish, installation type, innovations, and …

BRASS: Made of brass body, safe for drinking water, provides high heat-resistance and pressure-resistance, sturdy and durability. It can serve many years without leakage. DUAL SWITCHES: Double switches design, control the flow switch with any switches. PLEASE turn off both handles after finish using. FOLDING: Foldable spout arms.

8/6/2021· This dual-capacity utility sink is the perfect option for large laundry.

Mayfair The System - by Savile Row. Fireclay, "Solid Cast" construction, forms the beautifully modelled exterior associated with all Savile Row - "Mayfair" sinks. Generous Single bowls allow for deep washing, soaking and rinsing, with thee sizes available to suit all kitchen design, being 761mm, 838mm and 914 mm. Th