











After the shower is turned off, the water still runs. Is it a quality problem?
Have you encountered a problem like this? After the shower was turned off, the water still ticked out. Sometimes after turning off for a long time, the water still flows out suddenly, and it flows fast. This is how it happened. Today, let's take a look at "The sudden water flow problem after the shower is turned off".
Regarding this problem, at first it was suspected that it was a shower quality problem. In order to clarify it, we also specially checked our showers, but this kind of situation still occurs. Later, we asked a professional to figure out that the water running after the shower was turned off was because of the water stored in the top spray and the shower pipe.
Professional explanation: In order to pursue the comfort of showering, the current shower head sprays are very large. The bigger it is, the more water there is after turning off the faucet. After use, the air pressure inside the shower is in equilibrium with the atmospheric pressure, so the water inside will not flow out temporarily. After some time, the water will flow out when the balance is lost. This is a problem with large-top showers. It is not that the shower is leaking or broken, so you can rest assured if you encounter this problem. If it is a constant dripping and leaking, then it is a quality problem.
So what should I do if the shower really leaks?
Analyze the factors of the shower leakage first. The main points are as follows:
1. The shower nozzle is blocked. If it is used for a long time, the water output will become smaller. If the water quality is not good, the water contains a lot of alkali, and scale deposits on the water outlet cause the shower to be blocked. At this time, it has to be resolved by the seller of the shower. Therefore, it is very important to choose a reliable seller.
2. Shower plating. Many people have found that the surface paint on the shower can peel off. It will be ugly after the paint is peeled off. If you have just bought a shower that has this problem, it will affect the appearance. In addition, some poor-quality showers will block because of paint falling off. So we have to take a closer look at the surface of the purchased shower for these problems.
When purchasing a shower, you must carefully observe whether the surface of the shower is smooth or not. If it is rough to the touch, it may be processed twice.
3. The material of the shower. Some showers are made of plastic or cast iron. The plastic shower head may contain a lot of waste material, and the service life will not be long. Of course, some hand showers that use plexiglass, ABS and other materials are still very good. However, it is not recommended that you choose the shower head made of cast iron, which is easy to rust. Many people who chose this shower are very regretful, because it didn't take long for it to rust. It's ugly, and it also blocked the water outlet and broke the entire shower. At present, the better material is copper.
After knowing the reason, we can come to a solution. There are mainly the following solutions for leakage in the shower:
1. Leakage at the steering ball of the shower head. First unscrew the shower head from the steering ball ring, find the O-ring or similar seal inside and replace it, and then turn the shower head back. Just go to the original position.
2. Leakage occurs at the joint of the handheld shower. Select the right size shower hose and shower head according to the specifications, replace its rubber ring, and reinstall it.
3. Water leakage caused by gravel or sediment. Unscrew the shower head for cleaning. If necessary, soak the parts with vinegar and scrub the parts. Take care to avoid scratching it. If the shower head is an adjustable spray type, carefully check all movable parts for signs of excessive wear. If the rotating handle cannot move smoothly, the internal cam may be broken, and the entire shower head needs to be replaced.
4. The spray mode from the shower head becomes a mixture of spray and rain mode. If the shower is used for a long time, the water output will decrease. It may be because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet cause the shower to be blocked. It is also very simple to solve. For the shower head designed with silica gel particles, just gently knead it. If the scale is serious, you can put white vinegar in a plastic bag, wrap the shower and soak for some time, then rinse with water.
Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers.
The products include faucets, sinks, basins, bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.
Look forward to cooperating with you.
Thanks a lot!
The bathroom is the wettest place in the house, and it is easy to breed bacteria if it is not properly cleaned. Next, learn these tips to make the bathroom as clean as new!
Clean the Faucet
Does the water stain on the faucet look dirty? Water stain can be removed with one trick! Mix the white vinegar and baking soda powder evenly, put the toilet paper in and soak it completely, then cover the faucet for 30 to 60 minutes, uncover it and rinse with water.
Cleaning the Shower Head
If the shower head is used for a long time, there will be a layer of scale on the surface, which looks dirty, and even more serious it will block the water outlet! You can take a plastic bag, pour white vinegar, wrap the shower head and fix it with a rubber band, soak it for 1 hour and then dry it with a dry towel. The shower head will be as clean as new. A clean shower head is much more comfortable to use!
Cleaning the Toilet
1. For yellow stains that are difficult to remove in the toilet, you can sprinkle with baking soda and soak in hot water for half an hour before washing. Remember to cover the water outlet on the inner edge of the toilet with toilet paper soaked in baking soda solution to achieve the purpose of soaking. The same goes for squatting toilets!
2. If conditions permit, you can remove the toilet lid and clean the gap.
3. Add some white vinegar to the water tank, which not only has the effect of disinfection and sterilization, but also removes the scale attached to the inner wall of the water tank.
Cleaning Bathroom Tiles
The joints of toilet tiles can easily turn yellow and black. Dip and use a toothbrush with washing powder, toothpaste or baking soda can effectively brush off stains. Remember to clean up water stains every time you use the bathroom!
Cleaning the Exhaust Fan
Exhaust fans can help keep the toilet dry, but because of the inconvenience of cleaning, it is often overlooked by us and becomes a place to hide dirt!
1. Remove the fan cover, soak it in soapy water and wash it, and then dry it.
2. Soak the rag in soapy water, wring it out, and carefully scrub the fan blades and vents. Finally wipe it with a dry towel.
3. Install the dried fan cover as it is.
Cleaning the Mirror
Bathroom mirrors are often stained with toothpaste, water stains and other things. At this time, you might as well use the leftover black tea bag to gently wipe the spots on the mirror, and then wipe it with a dry cloth to restore it to new.
Clean Rust Stains
The bathroom is damp. In case the metal utensils rust, you can cut the lemon in half, squeeze the lemon juice on the rust stains, soak for 10 minutes, brush off with a brush, and finally clean it with clean water.
There are many bottles and cans in the bathroom. You can apply a layer of nail polish on the bottom of the rust-prone material in advance to prevent rust.
How to choose bathroom accessories set?
1. Style matching: pay attention to matching with the overall decoration style of the bathroom.
2. The bathroom hardware should be purchased as a set, which is cheaper than the single purchase. One set of bathroom accessories with unified design of the series is more complete and stylish. Avoid mismatching.
3. The material is preferably stainless steel, and the surface is chrome-plated. The biggest advantage of stainless steel material is strong stability, high density, heavy weight, high ductility and plasticity. And it can be designed in various shapes. It is plated with a layer of metallic chromium, which is bright, waterproof and rust-proof.
4. Pay attention to these details when choosing.
Surface Finish
Surface plating determines if towel racks can last forever. Generally speaking, the brighter and finer the surface, the more uniform the color, and the better the mirror effect, the better the coating quality.
Product Base
Pay attention to the material of the base. The material of the base determines the strength of the load-bearing capacity. Most manufacturers use zinc alloy materials. If it is stainless steel, it depends on which standard stainless steel is used.
Surface Touch
Good bathroom accessories have flawless appearance. Touch can make a certain judgment on the product quality. Smooth touch without burrs is good surface treatment performance. Pay special attention to corners, welding positions, etc.
Some faucets are used two or three years, and the water flow is intermittent or rusted into green. The handle is hard to be used for opening and closing. The size of the water flow depends on luck.
Some faucets have been used for 20 years, and the surface is still as smooth as new. The feel when adjusting the angle of the handle is still as silky as the chopsticks in a honey jar. The speed of the water flow are still adjusted as you like. So how can we pick a faucet that can last 20 or 30 years or more?
First, the kitchen faucet can be rotated 360°.
For ease of use, the kitchen faucet should be taller, and the spout should also be very long. It is best to extend above the drain and not splash water. If there is a hot water line in the kitchen, this type of faucet should also contain hot and cold hoses. In order to meet various needs, most of the kitchen faucets can rotate the body of the faucet left and right. The sprayer part of some faucet can be pulled out, which is convenient for cleaning to all corners of the sink.
Second, if the budget is enough, the material of stainless steel is preferred.
The material of kitchen faucet is generally brass, which is the most common faucet on the market. However. Due to the characteristics of the kitchen environment, pure brass faucets are not necessarily the best choice. All pure brass faucets have electroplating on the outermost layer, and the function of electroplating is to prevent corrosion and rust of the brass inside. There is a lot of oily smoke in the kitchen, and the greasy hands and cleaners on the hands when washing the dishes make it often necessary to clean the faucet. If you do not use the correct way to clean, it is likely to damage the electroplating layer of the faucet, causing the faucet to be corroded and rusted. If you want to choose an all-brass kitchen faucet, you must be sure to have excellent electroplating, otherwise it will easily cause the faucet to rust and corrode.
And now some manufacturers use high-quality 304 stainless steel to make faucets. Compared with pure brass faucets, faucets made of high-quality stainless steel are free of lead, acid, alkali, corrosion, and harmful substances, and will not pollute tap water. This is very important for drinking water in the kitchen; and the stainless steel faucet does not need electroplating, it is extremely difficult to rust, and the hardness and toughness are more than twice higher than that of brass products, so it is very convenient to clean. However, due to the high difficulty of stainless steel processing, the current high-quality stainless steel faucets are usually relatively expensive.
Third, pay attention to whether the length of the tap can clean the sinks on both sides.
When buying, pay attention to the length of the basin and the faucet sprayer. If it is a double sink, pay attention to whether the length of the faucet can clean the sinks on both sides when rotating. Most kitchen faucets can rotate the body of the faucet left and right, which is convenient for cleaning to all corners of the sink.
The sink is the most important part for kitchen decoration. When cooking and washing dishes, 65% of the time is spent dealing with the sink. If you choose the wrong one and want to change, the countertops and cabinets will be changed accordingly, and you will regret it by then.
There are so many sinks, which one to choose without regret?
We summarized the advantages and disadvantages of the sink materials on the market, the experience of using single and double bowls, and the precautions for installation. Let you never make mistakes in the sink when decorating the kitchen.
Which is better for the sink material?
Common sink materials include stone, stainless steel, ceramics, etc.
Artificial Stone:
Advantages: good cleaning, seamless docking, various colors.
Disadvantages: the texture is not as hard as steel.
Many people say that the artificial stone large single bowl sink is easy to use. The capacity is large enough, comes with various drain racks, not afraid of scalding, and will not stain. Simply clean it for 2 minutes a day and it will be shining. If the countertop material is acrylic or quartz, it can be seamlessly connected, and there will be no annoying, moldy silica gel.
Granite:
Advantages: strong, scratch-resistant, wear-resistant, and high-temperature resistant.
Disadvantages: easy to scratch pots, bowls and tableware; need to clean up every day.
Granite is also a kind of stone, and it also has the characteristics of high hardness, wear resistance and high temperature resistance.
However, there are many disadvantages of granite. Because of its high hardness, if you drop porcelain utensils, they will break for sure.
Because it is super abrasion-resistant, to the degree of sharpening the knife, be careful when washing pots with paint on the surface. The sink can scratch the paint!
The stone has the characteristics of easy bleeding, especially when the sink has cracks. The colored liquid can easily penetrate into the stone. Colored liquids like soy sauce or corrosive liquids such as vinegar must not be poured into it, otherwise just wait for the dyeing later. It will cause big trouble in dish washing.
The most important point is that the stone breeds microorganisms at a super fast speed, so you have to wipe it every day like the bathtub!
Stainless Steel:
Advantages: anti-oil, anti-fouling, not afraid of acid and alkali, affordable, strong and flexible.
Disadvantages: prone to scratches and water stains (brushed stainless steel will be better).
Stainless steel has the characteristics of oil and dirt resistance, and because of its low hardness and easy processing, it has a variety of shapes. Many sinks are now integrally formed. A sink is stamped directly from one steel plate, which greatly saves production costs. Stainless steel is suitable for most families.
It is very important to choose a brushed matte surface, which is both dirt-resistant and wear-resistant. Imagine the water stains, handprints, and scratches left by washing dishes and pots after using the shiny polished stainless steel several times. It is simply horrible. The stainless steel sink of good quality has a uniform and fine brushed texture, and it feels very smooth, so that the oil can flow smoothly and will not remain. The inner corner of the sink should be rounded so that it will not hide dirt. To choose stainless steel, you must look for the SUS304 mark, and only the real 304 stainless steel can have quality assurance.
Porcelain:
Advantages: strong, acid and alkali resistant.
Disadvantages: heavier, easy to break, difficult to clean oil stains.
The biggest advantage of the ceramic sink is its good-looking appearance. Ceramic sinks are heavier than stainless steel sinks and lighter than stone sinks. The weight is relatively heavy, and it has an apron front, so installation is very laborious. And one of the most criticized aspects is that ceramics have a kind of adsorption ability for oil. If it is not cleaned for a while, the upper edge will become dirty. And it is also very laborious to clean.
But it's really beautiful.
Single Bowl or Double Bowl ?
Single bowl or double bowl, this is a topic that everyone is arguing about when choosing a sink. After reading the following analysis, you will probably know what suits you.
Single Bowl:
Advantages: easy to put in a large pot.
Disadvantages: ordinary faucet can not clean the entire sink(can be equipped with pull-down faucet); function is not partitioned (can be equipped with mobile sink).
There are so many fans for the big single bowl, because it is big and deep enough that a large wok can be stuffed. With a pull-out faucet, you can clean every corner of the sink.
Large single bowl generally refers to a bowl with a length more than 60cm and a width more than 42cm, otherwise it is a small single bowl.
However, a large single bowl is more suitable for a kitchen with an area larger than 4 square meters, and a small single bowl can only be selected for a kitchen with a small countertop.
Most of the sinks on the market are sold in sets. Many sink sets include accessories and gadgets. Although these accessories and gadgets are gimmicks under the guise of "giving away", they are actually added value of the sink. With them, the function of the sink can be more perfect.
For example, a rectangular colander can hold dishes, vegetables, etc. The drain holes are evenly distributed and can drain water quickly.
Some large single bowl sinks are also equipped with a hidden knife holder, which is more convenient and safe.
Double Bowl:
Advantages: double bowls, double functions.
Disadvantages: A single bowl is relatively small and can't hold large items.
Large double bowls can also hold large pots as long as the volume of the bowl is large enough. Can achieve the function of a large single bowl. The small bowl is used for water filtration, or install a water drying rack to wash fruits and vegetables.
The small double bowl is a bit inferior and can’t hold a wok or the like, but it’s still very convenient to have two bowls. The use of dual bowls saves time and effort and improves efficiency.
The double bowl originally has more functions than the single bowl, because most large double bowls will have accessories such as colanders and drying racks. It can be used in partitions, which is unmatched by a single bowl.
When washing vegetables, pots and pans, you can separate the two to avoid greasy vegetables. It can also be used separately when washing pots and pans alone. One sink for washing and one sink for draining water. And it can also save water.
One bowl for washing fruits and vegetables, and the other for washing dishes.
The length of the double bowl is generally about 80cm. If the length of the counter is longer than 1.2 meters, double bowl can be installed. Many double bowls are designed as one big and one small. If you want to put the wok, the length of the large bowl should be more than 35cm, because the size of the wok is generally between 28cm-34cm. The disadvantage of the double bowl is that the sewer pipe is more complicated, and it is more prone to blockage and water leakage.
Therefore, if you choose a double bowl, it is necessary to buy a good strainer. If the inner wall of the drain is smooth, it is not easy to block. Some double bowls are equipped with threaded drain pipes, or relatively thin drain pipes, which tend to retain oil and cause unpleasant odors.
Above counter sink, under counter sink or one-piece sink?
Above Counter Sink:
All the edges of the sink are exposed on the countertop.
The cleaning of the above counter sink is very inconvenient. Over time, the glass glue on the edge of the sink will easily become moldy and black. The picture below may cause emotional upset, but the reality is always so cruel!
But its benefits are also very obvious, easy to install and cheap. And because edges are over the counter, the bearing capacity is very good. In case it is really disgusting one day and we can't stand it anymore, it can be easily removed as a whole. The space under the above counter sink is about 3 cm higher than the under counter sink. What does this show? It means that there is a large space under the sink for storage!
Under Counter Sink:
One wipe, everything is gone. The under counter sink is lower than the countertop. The water, residues, and vegetable leaves on the countertop will be in the sink with a single wipe. Super convenient. Generally speaking, the under counter sink is quite easy to clean. And it is very beautiful.
However, the installation of the under-counter sink is also more complicated. Not only do you have to prepare more installation costs, you also need to remind the decoration workers. Otherwise, it will generally be installed as an above counter sink.
In addition, once the under counter sink is damaged, it cannot be repaired and needs to be replaced as a whole. If the under-counter sink is used for a long time, the cracks will be moldy, so the mold-proof glue should be used between the under-counter sink and the countertop.
One-piece Sink:
Finally, the one-piece sink. One-piece sink refers to a sink that is an integral part of the countertop. It usually appears in the overall cabinet, and the countertop and the sink are seamlessly connected. The advantage is that there are no gaps, there is no need to worry about mold, and it is really easy to clean up. The disadvantage is that it is very troublesome to replace, which is equivalent to dismantling the entire counter.
In short, whether it is stone, stainless steel, or ceramics, whether it is a single sink or a double sink, it depends on the situation of your own house. As long as you choose the right material, bowl size and quantity, installation style, you can choose the best sink for your home.
Some faucets are simple and practical, while others are decorative. Faucets can be in many different materials and shapes, such as short/high, single/double handle, stainless steel/brass, chrome/black/gold colors, etc. It can reflect the contemporary architectural decoration style. Also so many brands of faucets are available. Do you want to know the best faucet brands in China? Let's take a look at the ranking of China's top 7 faucets brands in 2020.
Ⅰ. MOEN
Moen entered the Chinese market in 1994 and established its first sales company in Waigaoqiao Free Trade Zone, Shanghai. In the following few years, American Moen company has established offices in Shanghai, Beijing, Guangzhou and Chongqing, and its sales network has covered more than 180 cities in China. In 1996, Moen set up a joint venture factory in China with global advanced production management and manufacturing technology, which shows its confidence in the Chinese market and its determination to develop in China for a long time. At the same time, all the factories in China have passed ISO9001 quality system certification and ISO14001 environmental system certification. Relying on the deep understanding of the needs of users, distributors, agents and professionals in the industry and the joint efforts of all employees, American Moen company has become one of the leading figures in China's kitchen and bathroom equipment industry, and has established a strong sales network and perfect after-sales service system. The company's business is developing rapidly, and its products are deeply loved by users.
Ⅱ. Jomoo
Founded in 1990 and headquartered in Quanzhou, Fujian Province: the Economic Zone on the west side of the Taiwan Strait, Jomoo Group is a large comprehensive bathroom leading enterprise and a national high-tech enterprise integrating R and D, production, sales and service. It is also the Secretariat of "Kitchen and Bathroom Hardware Sub-technical Committee of National Hardware Standardization Technical Committee". The group's brand "JOMOO" has won many national honors such as "China's Famous Trademark", "China's Environmental Label Product Certification", and has been selected into the government green procurement list for many times.
Jomoo group headquarter covers an area of more than 1.34 square kilometre. It owns 7 subsidiaries, 4 business divisions and more than 8500 employees. Since its establishment, Jomoo group has taken "creating healthy kitchen and bathroom life, making the earth environment better" as its mission. Through continuous scientific and technological innovation, Jomoo group has made great efforts to provide customers with safe and environmental protection, resource-saving products and high-quality services, and constantly improve and enhance the quality of home life.
Ⅲ. Hansgrohe
In 1995, Hansgrohe set up an office in Shanghai to introduce the world's top bathroom brand to China. Hansgrohe Sanitary Products (Shanghai) Co., Ltd., a wholly-owned Chinese subsidiary of Hansgrohe group. It was established in Shanghai Songjiang Industrial Zone. It is also the fourth wholly-owned factory invested by Hansgrohe abroad.
2000: Hansgrohe sponsored the publication of the Chinese version of <The History of European Bathroom Culture>, which once again shows Hansgrohe's long-standing bathroom culture.
2001: Hansgrohe celebrates its 100th birthday. Four offices have been set up in Shanghai, Beijing, Guangzhou and Chengdu; A total of 50 stores and 20 distribution points were set up, successfully occupying the high-end bathroom market; Many high-end residences and hotels use Hansgrohe products. The representative projects are Grand Hyatt Shanghai, Venice Shenzhen, Hilton Chongqing, Beijing Hotel, GE Times, etc.
Ⅳ. Kohler
Kohler, founded in 1873 and headquartered in Wisconsin, is one of the oldest and largest family businesses in the United States. Kohler is a global leader in kitchen and bathroom products, engine and power generation systems, furniture, home decoration, hotel services and first-class golf clubs.
As early as the 1930s, Kohler products had a deep relationship with China. Kohler sanitary ware was used in many famous buildings in Shanghai, such as Jinjiang Hotel and Da Guang Ming Cinema. In 1995, Kohler's China office was established in Hong Kong. Since then, Kohler has officially entered the Chinese market. In 1999, Kohler set up its headquarters in Shanghai and set up offices in Beijing, Shanghai, Guangzhou, Chengdu, Wuhan, Hangzhou, Nanjing and Shenzhen. Till today, Kohler has 10 factories, more than 500 regular exhibition halls and more than a dozen flagship stores in China.
Ⅴ. COSO
COSO originated in Germany. Since 1993 when it came to China to create a professional sanitary ware production base, COSO has created logical and beautiful product by virtue of German industrial design concept, first-class material, ergonomics benchmark, mathematical space, rigorous manufacturing and rational beauty. COSO has won the support and recognition of the majority of consumers. After years of development, COSO has become a global leading brand of healthy sanitary ware.
In the industry, COSO products take the lead in passing ISO9001:2000 quality management system certification and EU CE certification. It has won the titles of "China Top 10 Brands of Sanitary Ware", "China Top 10 Brands of Building Materials", "China Energy Saving and Environmental Protection Promotion Products", "China Famous Brand", and "China Original Bathroom Design Award in 2007”. In 2020, the company participated in Shanghai World Expo to fully demonstrate the value and strength of the brand.
Ⅵ. TOTO
TOTO was founded in 1917. It was initially named Toyo Pottery Co., Ltd., and then renamed TOTO Co., Ltd. In 1912, TOTO set up a laboratory specializing in the research and development of sanitary ceramics (at that time, sanitary ceramics products were very common in Europe and the United States, but wooden toilets were still popular in Japan, which was in great contrast with the advanced sanitary culture in Japan today). With the wide sales of these sanitary ceramics products, TOTO used its excellent products to challenge the traditional health concept which has been accepted by the public. Till today TOTO is still working hard for it.
TOTO is a manufacturer of sanitary ware and related equipment for civil and commercial facilities. Pursuing high quality and high technology, so that users can enjoy a sanitary, healthy and comfortable life is the consistent goal.
Ⅶ. Grohe
Friedrich Grohe AG CO. KG Group is a world famous supplier and global exporter of sanitary ware products and systems. Founded in 1936, it has branch offices, 12 production plants and 17 business subsidiaries in 140 countries around the world.
It adheres to the founder's spirit of precision and high quality. Its business covers most countries and its reputation spreads all over the world. Grohe has made remarkable achievements. With the company moving towards a new global environment, the total turnover of Grohe increased to 1.5 billion CNY in 2020, and the export volume accounted for 64.3% of the group's total turnover.
There have always been a lot of worries about the bathroom. Generally, the size of the bathroom in a residence is 5-10 square meters, or even smaller. But to be comprehensive, toilet area, wash area, shower area are indispensable. The bathroom layout, design, and storage are not completely puzzled. Today we will teach you how to lay out the bathroom. Let's take a look at how other people solve such troubles!
For different bathroom spaces, the layout methods are different. Rectangular bathrooms are the most common, because such bathrooms are more convenient to separate dry and wet areas. Generally from the outside to the inside are: wash basin, toilet, shower room. The shower room is generally partitioned by a glass sliding door, which is very convenient to use.
It is difficult to design a square bathroom. Generally, the space is increased by reducing the length of the shower room. In the small square bathroom, the shower room is basically arranged on the opposite corner of the door, and then the wash basin and toilet are arranged in the corners on both sides. If the space is too small, you can only consider removing floor cabinets, bidets, bathtubs, etc.
Plan irregular spaces according to the size.
For irregular shape bathroom, item layout size is the key. According to the slight difference of different corner sizes, different functional areas can be planned, so that all the spaces can be used rationally.
For example, by adjusting the shape of the washstand or shower room, more space can be obtained.
Layout according to dry and wet separation:
The difficulty in planning a small-sized bathroom is the separation of dry and wet. If the wet and dry separation is handled well, the bathroom grade is also improved a lot. The following dry and wet separation methods are more common and reliable. You might as well learn from it.
Shower curtain + bathtub + water retaining strip:
This is the most economical way to separate wet and dry area. Modeling and installation are very simple. But take care to keep it dry after use. Otherwise, it is easy to mold and breed bacteria.
Shower room / retractable shower room:
It has good lighting and flexibility. When it is fixed in a corner, the glass partition can be unfolded, and it can be put away when it is not used, which can save a lot of space.
Glass partition + water retaining strip:
The glass partition material can well maintain the lighting effect of the bathroom and relieve the depressed feeling of the entire space. Generally used with water retaining strips. The elongated bathroom is very suitable. Glass partitions can also be used with low walls to ensure the privacy of the space and bring more light.
Move the sink out:
Move the original washing area directly to the outside of the bathroom. An interior door easily realizes the separation of dry and wet. The shower area and toilet area are reserved inside. It is also very convenient to arrange.
The bathroom storage can be squeezed out.
The location of the bathroom is not large, but if you make clever use of every hidden space, you will be pleasantly surprised to find that the space has become much larger!
Storage behind the door. Install a few bars behind the door to put towels or clothing. A hard wooden board is fixed above the door to store some infrequently used items. Don't let the toilet cosmetics be placed randomly. You can find a tray to store them neatly. The picture on the right is the correct way.
The double-layer shelf can hold more cosmetics.
Fix a magnet bar next to the mirror. Now you can put small hairpins and cosmetic tin boxes there. Never worry about losing your hairpin every day.
All kinds of beautiful jars and glass bottles can show their usefulness. Put in some long cosmetics such as powder brush and mascara. New skill!
Use a clip to hang the toiletries in a position within reach, which is easy to access and use.
Create an open bathtub. Place the toiletries in the bathtub sides and close it when not in use. There is no clue at all.
Place a ladder shelf with storage basket next to the bathtub. All items such as clothes, towels, and washing utensils are collected.
Especially suitable for families with babies. From now on, the toys will not be scattered all over the place.
The bathroom is very important and part of our lives. Let us take it seriously. Love life, start with a perfect bathroom.
In addition to the living room and kitchen, the bathroom that we use every day must not be sloppy in design. No matter if it is more than 10 square meters or less than 2 square meters, you must plan well to use practical and safe bathroom equipment: whether to arrange full bathroom equipment (including bathtub) or half bathroom equipment (excluding bathtub), independent or combined hand washing basins, what materials should be used for floor tiles and walls, and how to effectively use small and distorted spaces without waste, how to place multi-functional equipment without being crowded. If you are being worried about these, you can refer to these 5 bathroom design ideas from style to function, and collect them as inspiration for future designs.
Bathroom Design One: Tiles
For a water-filled bathroom, the easiest way is to attach tiles, which are not only waterproof, but also dry quickly. Common 30*30cm tiles are easy to construct and easy to clean; mosaic tiles can be arranged in patterns, and wood grain tiles solve the problem of solid wood prone to moisture and mildew. Textured bamboo tiles also have anti-slip effects, which are both functional and can create multiple styles of bathroom design materials.
Bathroom Design Two: Cement wall
Using cement as the theme of the bathroom space makes the space pure, visually extraordinarily refreshing and clean. And there is no need to worry about the accumulation of scale in the crevices of the tiles. For maintenance, as long as the bottom is waterproof, the upper transparent waterproof paint is basically unlikely to have sanding problems.
Bathroom Design Three: Black Frame Glass
Industrial style can not only be used in public spaces. For small-sized houses and the bathroom of the master bedroom, black-framed glass can be used instead of solid wall partitions. Not only is it visually more open and transparent, it has its own style compared to ordinary glass compartments.
Bathroom Design Four: Separation of Dry and Wet
Similar to hotels and Japanese residences, sinks and showers can be separate. The independent design not only alleviates the problem of insufficient bathroom space, but also makes the sink a part of the room or public space, and it is also more convenient to use.
Bathroom Design Five: Shower Curtain as A Cubicle
If you want to have both a shower and a bathtub in a small bathroom space, try replacing the glass compartment with a shower curtain. In this way, the basic dry and wet separation can be achieved, and the space occupied by the fixed partition door can be avoided. It has high appearance and can change the pattern style according to the mood.