











The sink must be installed in the bathroom? Take a look at these locations that may be more suitable for sinks in your new home!
As a patient with lazy cancer, where to put the sink determines how many steps I have to take to wash my hands. Do I have to go to the bathroom after eating snacks and watching a drama at night, and getting up to wash my hands? Can't the sink be placed at the door? Put it under my nose? Or even in the balcony close to me? The answer is yes.
01. Where should the sink be moved out of the bathroom?
In order to make it easier for you to use, we will give you a few common places to put the sink. It can be installed in the hallway. There may be few people who think of this, but it is very common in Japan. As long as space permits, they will find a way to add a sink near the hallway so that they can wash their hands as soon as they enter the house. In addition, the sink can also be used as a partition of the entrance, so that even the entrance hall is made.
Put the sink on the aisle at the entrance of the bathroom. In this way, the dry and wet separations can be easily realized. Because the washbasin only occupies a small area, the total space will not become small.
If you are worried that the total appearance will be affected by putting it outside, and later storage can not be done well and it is messy, you can directly weaken it visually during the renovation by adding a wall to enclose it.
Wooden fences or glass can also be used as partitions, and cabinets can be used for storage on top.
The glass partition can prevent water from splashing everywhere when washing hands, and keep the space visually transparent.
If there is a gap between two rooms, you may consider putting the sink here. Such as between two bedrooms, between the kitchen and the bathroom, etc.
The advantage of this is that it can make full use of the space and avoid the waste of repeated settings. At the same time, it can also have the function of dividing space. It can also be installed on the balcony. Modern people spend most of their time in the living room. If you put the sink on the balcony closest to the living room, because there is plenty of light and the view is open, will you feel better when you wash your hands?
We can also put the washing machine next to it, throw the clothes in and wash them.
It is relatively rare to install on the dressing table. A dressing table can be placed in the bedroom to store all kinds of small things, and it can be combined with the sink. Sinks can be installed in the bathroom, outside the bathroom, or between the cloakroom and the bathroom.
According to our thoughts, these may seem strange, but starting from the owner’s living habits, it seems to be a reasonable design. Tip: The disadvantage of placing the sink outside the bathroom is the laying of water and sewage and waterproofing. Need to discuss with construction workers in advance and implement as required. Waterproofing should also be done well. It is recommended to follow the waterproof standard of the dry area of the bathroom, and apply waterproof paint at least 30cm high on the wall near the sink and on the floor. Secondly, there is no door to block the washbasin outside. If the storage is not done properly, the messy scene will be directly exposed. Therefore, the corresponding storage function must be done well, and the choice of towels even become stricter. Otherwise sit in the living room and see a messy washing area.
02. An easy-to-use sink can be like this.
In addition to moving the washbasin, its appearance and comfort should also keep up. You need to know the following knowledge. The style of the washbasin: Above counter basin and under counter basin. Above counter basin has a super good looking. In addition to square, round, oval, there may be other petal shapes to choose from. Generally they can be matched with high body faucets.
The under-counter basin is installed under the countertop and glued to the countertop from bottom to top. The advantage is that it is very convenient to clean the countertop. It is very common to have water on the countertop, you can easily wipe the water into the basin. It is more convenient to have a mirror cabinet, and the storage capacity can be improved a lot. Some mirror cabinets are fully enclosed, and some are partially open for storage. What kind of mirror cabinet to choose depends on your living habits.
Lighting Design.
Light is a top requirement for looking in a mirror. Most people may only install a mirror headlight above the mirror. In fact, the best way is to set up lights on the left and right sides of the mirror, which is about one person wide. Many professional dressing tables are set up in this way.
Double Basin Design
The double basin design can improve life efficiency. For example, a family of four has to go to school and work at the same time. And two people washing together is also very warm. Of course, double basins may only be suitable for large bathroom space.
Basin Style
It can be a basin or not. An artistic design. For example, in a retro-style home, try a bicycle wash basin.
There are also a few stacked stones. Is there a trace of natural "spring" style when the water runs out from the stone?
If you like minimalist style, consider this transparent glass wash basin.
If you want to realize the separation of dry and wet, but in the small area of the bathroom it cannot be realized, the above method can be considered. It is indeed completely reasonable and feasible to move the sink out.
Whether the bathroom is beautiful and high-end mainly depends on the bathroom cabinet. Therefore, in order to achieve attractive looking and high practicability, the bathroom cabinet must have the characteristics of exquisite appearance and strong storage capacity.
Below, we have sorted out 20 high-value bathroom cabinets to see if there are any designs you like. If the bathroom in your home has not been renovated, the following overall design is also good for reference.
1. The bathroom with yellow walls and white fittings, plus retro fancy floor tiles, gives you a quite warm feeling. Round mirror + above counter basin + hollow under counter cabinet, this kind of bathroom cabinet design has both aesthetics and storage function. Really like it.
2. If the home is modern & simple style, this one looks really good. Grey and white are very stylish. If the bathroom is not so big, you can install one wash basin. With the design of mirror cabinet + wall cabinet, there is plenty of storage space. If you are afraid that it is hard to clean the countertop when using an above counter basin, then choosing an under counter basin is also good.
3. This is also a simple style. The mirror is on top, which has the effect of extending the view of the bathroom. You can also refer to this design for a small bathroom. The handle-less design of the under counter cabinet is really advanced.
4. This bathroom cabinet adopts the design of round mirror + above counter basin + layered wall cabinet. The log counter top is in harmony with the wood grain tiles on the wall and floor of the shower area. The overall design and style are unified.
5. This is a gray-green tone. Two drawer type lockers. Moreover, clothes that need to be washed can be placed under the wall cabinet. It is particularly practical and convenient.
6. This is a log style. The design of rock under-counter basin + log wall cabinet. There is the feeling of close to the nature. Gives a sense of tranquility.
7. This is a combination of simple + log style. If your bathroom has the same layout, you can also refer to the storage design in the picture above. Shelves are placed on the right. The bathroom cabinet also has the function of a washing machine cabinet. And there is a drawer for storage. A storage basket can be placed under the wall cabinet, which is also very practical.
8. This is a black and white match. The round mirror is matched with a black log cabinet. Very simple and clean. Patterned bricks are used to pave the ground. The bathroom reveals a retro atmosphere.
9. This log bathroom cabinet is in harmony with the orange wall. There is a color matching effect with the toilet area. Show a lively atmosphere as a whole.
10. This is a double wash basin design, suitable for larger bathrooms. But to be honest, the mirror tops the ceiling, which has the effect of lengthening the bathroom, making the bathroom look taller and larger.
11. This bathroom cabinet design is more stable and advanced. Especially suitable for business people, the overall style is very high-end.
12. This bathroom cabinet is beige and floor standing model. Fashionable with a little American style. The mirror is built-in, and there is a light strip design inside. Very nice.
13. This bathroom is a light luxurious design. Use dark blue with white. There is also a light gray bathroom cabinet as an auxiliary color. Simple and advanced.
14. When you are worried that the bathroom is too monotonous or mediocre, you can refer to the design above. The bathroom cabinet is gray-blue, which is particularly conspicuous and adds a deep sense.
15. This bathroom cabinet is light luxury American style. The handle and towel bar are made of polished gold metal. There are lights on both sides of the mirror to increase lighting. The design of four large drawers greatly increases the storage space of the bathroom.
16. The wood color and marble blend so well. Small bathroom can also refer to the picture above. Install a wall cabinet above the toilet to improve storage capacity. The handleless design is very advanced.
17. This is a marble paving floor and wall. Matched with dark gray bathroom cabinets. Simple and advanced.
18. This bathroom cabinet is very artistic. Retro floor tiles match dark green bathroom cabinets. The semi-hanging basin makes the whole look harmonious and distinctive.
19. This is a simple white bathroom cabinet with no handle design. In-wall faucet. Clothes that need to be washed can be put under the wall cabinet.
20. The main color of this bathroom is white and gray. The gray-green bathroom cabinets very well increase the vitality of the bathroom.
The bathroom is full of water vapor after taking a shower? The bath water splashes on the ground? Sometimes you slip and fall accidentally? The bathroom without separation of wet and dry is simply maddening. The separation of wet and dry is an unavoidable matter in the bathroom. As long as we have a slight requirement for the quality of the bathroom, we will immediately take care of this matter. Because the separation of wet and dry in the bathroom is a very cost-effective job, it will make your bathroom life full of happiness in minutes. How to achieve the separation of dry and wet in the bathroom? For small-sized bathrooms, the partitions are too narrow, and they cannot be separated from wet and dry. Very tangled. So how to separate wet and dry in a bathroom of only about 5 square meters? Let's analyze how to separate wet and dry in a small bathroom!
Separated by Shower Curtain
The shower curtain is the simplest and most beautiful way to separate wet and dry in the bathroom. It can be said to be a must-have artifact for the bathtub. Use a shower curtain to separate the dry and wet areas of a small apartment, which is the most trouble-free and cost-effective. Whether it is an arc-shaped corner, or directly draw a straight line, make a water retaining strip and hang a shower curtain. It is very convenient. You can also frequently change the style of the shower curtain to a different style. But the disadvantage is that it cannot effectively block water vapor, and it is easy to grow mold and needs to be cleaned frequently.
Glass Partition
Compared with the shower curtain which can not effectively isolate the water vapor, the shower door is much more practical. More suitable for bathrooms equipped with showers. The shower door is mostly made of glass. Glass partition is a better choice. On the one hand, because the glass is transparent, it does not appear to be visually narrow. Second, because the glass has better water resistance, the effect of wet and dry partitions will be better.
Half Wall Partition
For small apartments, this is also a good choice. Not only can it perfectly achieve the purpose of separating dry and wet, but also use the half wall to create its own style. Pasting retro-style or modern-style tiles on the wall can play a decorative and beautifying role.
The water pipe under the sink does not contact the floor.
In addition to working on the door, you can also separate wet and dry in places such as sinks and basins. The important point is to not to touch the floor! Bathroom furniture that is not exposed to water stains is less likely to be corroded, which increases the service life and is also easy to clean.
Move the Sink Out
The most complete wet and dry separation is to move the sink directly outside the door. Use part of the outside space to make the shower area inside the bathroom more spacious. In addition, the external washbasin also allows a family to wash without interfering with each other. The vanity and sink are placed outside the bathroom. Completely cut off the moisture in the bath. Small apartments can also use the walkway outside the bathroom to do so!
Do you like the bathroom with separate dry and wet function? The dry area and wet area of the bathroom are perfectly separated, which not only partitions the space, but also is visually more fashionable and rich in spatial level. Wet and dry separation has gradually become mainstream in bathroom design, so hurry up and give it a try!
Some faucets are used two or three years, and the water flow is intermittent or rusted into green. The handle is hard to be used for opening and closing. The size of the water flow depends on luck.
Some faucets have been used for 20 years, and the surface is still as smooth as new. The feel when adjusting the angle of the handle is still as silky as the chopsticks in a honey jar. The speed of the water flow are still adjusted as you like. So how can we pick a faucet that can last 20 or 30 years or more?
First, the kitchen faucet can be rotated 360°.
For ease of use, the kitchen faucet should be taller, and the spout should also be very long. It is best to extend above the drain and not splash water. If there is a hot water line in the kitchen, this type of faucet should also contain hot and cold hoses. In order to meet various needs, most of the kitchen faucets can rotate the body of the faucet left and right. The sprayer part of some faucet can be pulled out, which is convenient for cleaning to all corners of the sink.
Second, if the budget is enough, the material of stainless steel is preferred.
The material of kitchen faucet is generally brass, which is the most common faucet on the market. However. Due to the characteristics of the kitchen environment, pure brass faucets are not necessarily the best choice. All pure brass faucets have electroplating on the outermost layer, and the function of electroplating is to prevent corrosion and rust of the brass inside. There is a lot of oily smoke in the kitchen, and the greasy hands and cleaners on the hands when washing the dishes make it often necessary to clean the faucet. If you do not use the correct way to clean, it is likely to damage the electroplating layer of the faucet, causing the faucet to be corroded and rusted. If you want to choose an all-brass kitchen faucet, you must be sure to have excellent electroplating, otherwise it will easily cause the faucet to rust and corrode.
And now some manufacturers use high-quality 304 stainless steel to make faucets. Compared with pure brass faucets, faucets made of high-quality stainless steel are free of lead, acid, alkali, corrosion, and harmful substances, and will not pollute tap water. This is very important for drinking water in the kitchen; and the stainless steel faucet does not need electroplating, it is extremely difficult to rust, and the hardness and toughness are more than twice higher than that of brass products, so it is very convenient to clean. However, due to the high difficulty of stainless steel processing, the current high-quality stainless steel faucets are usually relatively expensive.
Third, pay attention to whether the length of the tap can clean the sinks on both sides.
When buying, pay attention to the length of the basin and the faucet sprayer. If it is a double sink, pay attention to whether the length of the faucet can clean the sinks on both sides when rotating. Most kitchen faucets can rotate the body of the faucet left and right, which is convenient for cleaning to all corners of the sink.
Don't think that after the new house is renovated, it will be as pleasing as the propaganda album. After the new house is renovated, a large amount of decoration waste will be generated. Dust, stains and marks from the decoration will be left on the walls and glass. Just like a baby who was just born, she will have a cute appearance after washing and putting on clean clothes.
Cleaning the newly renovated new home is an important task after decorating the new home. It is also the most laborious task. Facing a messy and unstructured new home, you don’t know where to start. Summarize the first cleaning experience after the renovation. We hope it will be of reference significance to you.
01 Cleaning Service
Those who are clueless about the cleaning of a new house can choose the cleaning service of a housekeeping company. Housekeeping companies have their own routines and tools for cleaning work. It is also a way to hand over professional cleaning work to them. The premise is to choose a qualified and high-quality housekeeping company. Services include: house dust removal, cleaning up decoration garbage, wiping glass, cleaning the floor, decontamination and disinfection of kitchen and toilet, cleaning up decoration traces, etc.
Notes on cleaning service
1. Organize a list of cleaning precautions, and list some areas that need special cleaning to avoid omissions. The decoration materials of each family are different. It is necessary to tell them some precautions, such as which places and areas cannot use water or chemical cleaners. These need to be communicated clearly with the housekeeping company before starting work.
2. Clearly state the materials of walls, floors, furniture, etc. that need to be cleaned, and let the staff prepare appropriate cleaning tools.
3. Communicate clearly about the tools needed for cleaning, which are brought by the staff and which are prepared by us.
4. Communicate clearly on the disposal method of the cleaned up waste, whether to throw it away or keep it somewhere.
5. Supervision, including whether to do a good job in dust prevention and cleaning of dead ends.
02 Clean Up by Yourself
Some people are unwilling to hand over their new homes to strangers to clean up, so they do their own cleaning work. Cleaning in person is nothing more than two things: preparing tools and clarifying the order of cleaning.
Preparation of Tools:
1. These will be used to clean the wall.
Small brush, sandpaper (to polish the paint on the wall), shovel, glass spatula, wet paper towel (to wipe the wallpaper), ladder.
2. These will be used to clean the ground.
Vacuum cleaner, mop, broom, nano sponge, rag (use a discarded old bed sheet; the size can be cut at will. It is big enough), dust cover, garbage bag.
3. Protective Equipment
Shoe covers, gloves, aprons, masks.
4. Cleaning Utensils
Detergents, maintenance agents, disinfectants, glue removers.
Cleaning Order:
Cleaning follows the order from top to bottom and from the inside to the outside.
Start cleaning from the room first, and then go to the kitchen and living room. The bathroom can be placed last, because the bathroom is a place where water is used repeatedly during the cleaning process.
Like kitchens and bathrooms, where there are wall tiles, they need to be cleaned from top to bottom to clean up the gaps in the tiles and the paint spots and glue stains on the surface.
03 Cleaning Techniques
During the decoration process, many traces of material adhesion will be left, and some cleaning skills are required.
Tape print: Use a damp cloth to wet it for a while before wiping.
Paint traces: Use paint remover or turpentine.
Marker marks: Wipe with a rag or damp paper towel with some alcohol.
Tile stains: Use special detergent for tiles to clean, paint and drawing pen fluid can be cleaned with turpentine, pyruvic acid or alkali.
Cement on glass: If it is a small cement stain, wipe it with a damp cloth and then scrape it off with a spatula. If it is a stubborn and large cement block, you can use the toilet cleaner to remove it. The effect is very good.
Tips: The toilet cleaner is acidic. Wear gloves when using it and don't think that the toilet cleaner is effective in removing cement and use it on tiles and marble floors. In addition, do not use alkaline soap at the same time when removing the cement on the glass.
04 Cleaning Can Be Done Separately.
In fact, if the new house cleaning work is done step by step during the renovation process, the subsequent cleaning will not be so laborious. Separate the cleaning work to these renovation steps:
1. After the water supply line and electricity are completed, and the walls and ground are leveled, the whole house can be cleaned and clean up the discarded decoration garbage.
2. When laying tiles, remind the workers to wipe off the cement stains on the surface of the tiles after laying the tiles.
3. After painting the wall and floor, you can clean it again.
If you have other new house cleaning experience, please leave a message to share with us.
The kitchen sink is a kitchen ware that every family must have. Because the sink is used most frequently in the kitchen, the kitchen sink must be installed carefully in order to avoid some troubles when using the sink later.
The installation of the kitchen sink is not a major project, but you must pay attention to the details. If you want to rework, it will involve cabinets and countertops, and the workload is huge.
When the kitchen sink is actually installed, although it can be placed in the final process of the kitchen, it needs to be considered when designing the cabinets at the beginning. The cabinet design should leave a space for the sink, at least to ensure that the sink can be installed. Also, when making the countertop, an approximate size of the sink must be provided to facilitate the opening of the countertop. Of course, it is best to have a specific drawing size. Then tell the workers who make the countertops, which way you want to install the sink, above counter, farmhouse, or under counter? Because the hole size of each installation method is a little different.
The following introduces some basic processes and details of the kitchen sink installation, so that you can know what should be paid attention to when checking.
1) When the sink is installed, the faucet and the water pipe are usually installed at the same time. The current faucets are generally hot and cold, so you have to connect the hot and cold water pipes, and don't get confused.
2) After the faucet is installed, connect the drain set. The overflow hole pipe and the downhole pipe are directly connected. If you need to connect the waste water pipe of the dishwasher or water purifier, you can first connect a tee to the drain pipe of the sink. All joints must be kept tightly sealed, otherwise there will be problems such as water leakage and water seepage.
3) If the sink is equipped with an installation buckle, it is necessary to fasten the installation buckle to prevent displacement and unevenness of the sink.
4) After the sink is installed, a leak and drainage test should be done. The method of testing is to fill the sink with water and see if there is any leak in the tank. Because the quality of some sinks is not good enough, there will be blisters, cracks and other reasons on the finished product that cause the sink to leak. If there is no leak, open the drain and let the sink perform a drain test. When draining, pay attention to whether there is water leakage at each interface of the sewer pipe, whether the tank drains smoothly, and whether there are too many residual water marks.
5) After doing a series of tests, if there is no problem, the edges around the sink can be sealed. Applying waterproof glue, and doing some beautification work in the follow-up. Now we have basically completed the entire installation of the sink.
During the entire installation process of the sink, the most important thing is to pay attention to the tightness. Pay attention to the contact position of the sink and the countertop or the junction of the water pipe. So as not to cause water leakage. After the sink is installed, most houses are still in the process of renovation. So keep the sink tidy and clean, and try not to expose it. Too much dust and debris will fall in the sink during decoration. If it is not cleaned up in time for a long time, it may cause problems such as watermarks and rust in the sink.
So after installing the sink, clean the sink, try to wipe off the water stains, and then cover it with a plastic cloth. When you check in later, you can open it and clean it up again. Basically, it can avoid watermarks and rust in the sink after moving in.
In daily life, the planning of the bathroom is very important. A space of a few square meters has to bear a lot of sanitary ware and electrical appliances, such as toilets, bathtubs, washing machines, clothes dryers, etc. These are essential equipment that can improve the comfort and convenience of life.
The three-square-meter bathroom is also the size of most apartment bathrooms. The space is not large, but it does not affect people's pursuit of quality life. How to make good use of small space and achieve the aim of practical and beautiful appearance ? There are many ways.
01 Extend the sink counter to the washing machine and get an extra storage table.
If the area of the sink counter is relatively wide, you might as well design the washing machine and sink counter as a whole. By the way, the upper part of the washing machine is also designed as a countertop, which has an extra space for display. The whole area be neat and decent.
A large sink is exactly what women need. They have too many skin care products and cosmetics to be placed.
Suitable for: single women, or small families.
Advantages: The upper part of the washing machine is fully utilized and many things can be placed.
Of course, if you want to pay attention to some design sense, you can design the washing machine and the sink in a staggered layer, showing a patchwork of beauty, and it can also bring a unique atmosphere to a small space.
02 The washing machine and the storage cabinet coexist harmoniously, and one thing is multi-purpose and takes up less space.
If there are many things in the house, consider using more storage cabinets in the bathroom. But in a small space of three square meters, how should the washing machine be placed?
The washing machine, storage cabinet, and sink can be designed as a whole, and the three can use each other to realize their own value, visually beautiful, form a multi-purpose, and occupy a small area.
Suitable: Families with lots of things.
Advantages: One thing is multi-purpose, and it occupies a small area.
03 Maximize the use of corner space
There is always an unexpected room type of an apartment, such as a three-square-meter rectangle, but it happens to be faced with the problem of a lot of things and a lot of demand. The washing machine and the cabinet need to be put in the bathroom. How to achieve it ?
Three walls can be used. The storage cabinets, sinks, and washing machines leaning against the wall can perfectly maximize the use of corner space.
Suitable for: families who have many things and pay attention to space design.
Advantages: The smallest space is used to the maximum.
04 Storage rack: Use the height of space to realize vertical storage.
Different room types and different residents have different requirements for the placement of washing machines. Some people like simple display. Easy to take things, and easy to move the washing machine. In fact, a storage rack can solve all the troubles. The storage rack is light and convenient, and there is no construction problem. You only need to place it in a suitable position, put daily necessities on it, and put a washing machine underneath it to achieve a perfect plan for a small space. This is also a way to achieve vertical storage, which saves more space.
Suitable for: Singles with less things and high requirements for the convenience of life.
Advantages: easy to move, easy to clean, and less costly for decoration.
It is not difficult to stuff a washing machine in a three-square-meter bathroom. The key is to design in combination with different room types. In addition, the living needs and actual conditions of different residents must be considered to create a comfortable and practical bathroom space.
Aquacubic Has Rich Experience and Passion in Bath and Kitchen Industry. We can provide total solution for apartment projects.
In addition to the practicality of the apartment renovation, we also pay attention to its beauty. For example, choose wall-mounted toilets and washbasins; choose concealed baseboards; hide all the pipes; improve the overall aesthetics!
Concealed showers are more beautiful than exposed showers.
There are mainly the following 3 ways to install the shower:
1) Exposed installation: the water inlet pipe and mixing valve of the shower are exposed outside, which is not beautiful enough;
2) Concealed pipe installation: The inlet pipe is buried in the wall and the mixing valve is outside. This is most commonly used method;
3) Concealed installation: Completely opposite to the first type, the inlet pipe and the return valve are installed inside the wall. Leaving only the switch and the water outlet outside. Although it is beautiful, the process is complicated.
For concealed showers, there are also two different styles:
1) Top sprayer and hand shower
Look at the picture, the top shower head is matched with a hand-held shower head at the bottom. In this way, you need to determine the size of the shower head before renovation. And do the drilling and wiring layout. In terms of installation, this method is relatively simple.
2) With additional side spray
This is based on the former, plus a side spray function. During renovation, pre-installed in-wall boxes and multiple valve cores are required to match the water outlet. You can imagine how complicated this approach is! How to install it? Look down.
First determine the number of side nozzles (usually 2-6); the in-wall installed valve core has multiple outlet connection ports, from the valve core to the main water inlet, other outlets, top spray showers and hand showers; Secondly, cement leveling is required between the valve core and the wall, and in-wall installed parts are also used to stabilize; then leveling, waterproofing and pressing are performed to see if there is any leakage; the last step is to sticking ceramic tiles.
Compared with the exposed installation, the appearance of the concealed shower is certainly more attractive. However, the maintenance is complicated and cannot be ignored. The water pipe fittings of the exposed shower are all on the outside. If the concealed shower needs to be repaired, we can only break the wall! But if you choose a good quality shower, except for the water pipe problem, you don't need to break the wall under normal circumstances.
If you really like the appearance, it is not a big problem to choose a concealed shower. But if you are still worried about renovation and later maintenance, it is recommended not to try it.
Shower Purchase Skills
1. When choosing a shower, try to make the shower tilted (to see the water effect). If the top spray holes are obviously small or there is no water at all, it shows that the internal design of the shower is very low. It is impossible for the user to have a comfortable experience.
2. Look at the coating and valve core. Under normal circumstances, the brighter and more delicate the surface of the shower, the better the coating process. The high-quality shower uses high-quality ceramic valve core, which has high hardness and wear resistance, and is not easy to drip. The rotating adjustment handle is also very smooth.
3. Everyone knows that if the shower is used for a long time, there will be scale and impurities deposits, which will block the water outlet. If the mesh cover cannot be cleaned, the shower will not discharge water normally; in order to avoid the blockage of the water outlet due to poor water quality. All the shower nozzles should stick out for easy cleaning.
4. Shower accessories will directly affect the comfort of our shower. This cannot be ignored. For example, whether the lifting rod of the shower is flexible. Whether the shower joint is equipped with anti-twist ball bearings. Whether there is a rotation controller on the lifting rod, etc.
5. The water-saving function of the shower is the key point to be considered when purchasing the shower. Some showers use a steel ball valve core, and are equipped with a hot water controller, which can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. This type of shower with a reasonable design saves 50% of water compared to ordinary showers.
Installation Precautions
1. Do a good job of cleaning up during installation, especially the valve core. During the decoration, it is inevitable that decoration dust or even large particles of impurities enter the water supply pipe. If it is not cleaned up, these impurity particles will enter the valve core of the shower faucet, easily causing blockage or even destroying the internal structure of the valve core. If the shower has little water output, it is very likely that the cleaning work is not in place.
2. To ensure safety, equipotential terminals are indispensable.
An electric shock prevention system is indispensable in the bathroom: equipotential terminal. After all, compared with other spaces, the bathroom is accompanied by water all the year round, and the risk is relatively high. Connect with the equipotential terminal to prevent leakage, electric shock, and avoid dangerous situations.
There are a large number of shower options. So everyone can try to choose different showers. Traditional showers have gradually been eliminated. We must learn to keep up with the trend in renovation project.
Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers. The products include faucets, sinks, basins,
bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.
Look forward to cooperating with you.
Thanks a lot!