bathroom faucet Lavatory- China Suppliers Manufacturers Factory

The sink is the most important part for kitchen decoration. When cooking and washing dishes, 65% of the time is spent dealing with the sink. If you choose the wrong one and want to change, the countertops and cabinets will be changed accordingly, and you will regret it by then.

There are so many sinks, which one to choose without regret?

We summarized the advantages and disadvantages of the sink materials on the market, the experience of using single and double bowls, and the precautions for installation. Let you never make mistakes in the sink when decorating the kitchen.

 

Which is better for the sink material?

Common sink materials include stone, stainless steel, ceramics, etc.

 

Artificial Stone:

Advantages: good cleaning, seamless docking, various colors.

Disadvantages: the texture is not as hard as steel.

 

Many people say that the artificial stone large single bowl sink is easy to use. The capacity is large enough, comes with various drain racks, not afraid of scalding, and will not stain. Simply clean it for 2 minutes a day and it will be shining. If the countertop material is acrylic or quartz, it can be seamlessly connected, and there will be no annoying, moldy silica gel.

 

Granite:

Advantages: strong, scratch-resistant, wear-resistant, and high-temperature resistant.

Disadvantages: easy to scratch pots, bowls and tableware; need to clean up every day.

 

Granite is also a kind of stone, and it also has the characteristics of high hardness, wear resistance and high temperature resistance.

However, there are many disadvantages of granite. Because of its high hardness, if you drop porcelain utensils, they will break for sure.

Because it is super abrasion-resistant, to the degree of sharpening the knife, be careful when washing pots with paint on the surface. The sink can scratch the paint!

 

The stone has the characteristics of easy bleeding, especially when the sink has cracks. The colored liquid can easily penetrate into the stone. Colored liquids like soy sauce or corrosive liquids such as vinegar must not be poured into it, otherwise just wait for the dyeing later. It will cause big trouble in dish washing.

The most important point is that the stone breeds microorganisms at a super fast speed, so you have to wipe it every day like the bathtub!

 

Stainless Steel:

Advantages: anti-oil, anti-fouling, not afraid of acid and alkali, affordable, strong and flexible.

Disadvantages: prone to scratches and water stains (brushed stainless steel will be better).

 

Stainless steel has the characteristics of oil and dirt resistance, and because of its low hardness and easy processing, it has a variety of shapes. Many sinks are now integrally formed. A sink is stamped directly from one steel plate, which greatly saves production costs. Stainless steel is suitable for most families.

 

It is very important to choose a brushed matte surface, which is both dirt-resistant and wear-resistant. Imagine the water stains, handprints, and scratches left by washing dishes and pots after using the shiny polished stainless steel several times. It is simply horrible. The stainless steel sink of good quality has a uniform and fine brushed texture, and it feels very smooth, so that the oil can flow smoothly and will not remain. The inner corner of the sink should be rounded so that it will not hide dirt. To choose stainless steel, you must look for the SUS304 mark, and only the real 304 stainless steel can have quality assurance.

 

Porcelain:

Advantages: strong, acid and alkali resistant.

Disadvantages: heavier, easy to break, difficult to clean oil stains.

 

The biggest advantage of the ceramic sink is its good-looking appearance. Ceramic sinks are heavier than stainless steel sinks and lighter than stone sinks. The weight is relatively heavy, and it has an apron front, so installation is very laborious. And one of the most criticized aspects is that ceramics have a kind of adsorption ability for oil. If it is not cleaned for a while, the upper edge will become dirty. And it is also very laborious to clean.

But it's really beautiful.

 

Single Bowl or Double Bowl ?

Single bowl or double bowl, this is a topic that everyone is arguing about when choosing a sink. After reading the following analysis, you will probably know what suits you.

 

Single Bowl:

Advantages: easy to put in a large pot.

Disadvantages: ordinary faucet can not clean the entire sink(can be equipped with pull-down faucet); function is not partitioned (can be equipped with mobile sink).

 

There are so many fans for the big single bowl, because it is big and deep enough that a large wok can be stuffed. With a pull-out faucet, you can clean every corner of the sink.

Large single bowl generally refers to a bowl with a length more than 60cm and a width more than 42cm, otherwise it is a small single bowl.

 

However, a large single bowl is more suitable for a kitchen with an area larger than 4 square meters, and a small single bowl can only be selected for a kitchen with a small countertop.

Most of the sinks on the market are sold in sets. Many sink sets include accessories and gadgets. Although these accessories and gadgets are gimmicks under the guise of "giving away", they are actually added value of the sink. With them, the function of the sink can be more perfect.

 

For example, a rectangular colander can hold dishes, vegetables, etc. The drain holes are evenly distributed and can drain water quickly.

 

Some large single bowl sinks are also equipped with a hidden knife holder, which is more convenient and safe.

 

Double Bowl:

Advantages: double bowls, double functions.

Disadvantages: A single bowl is relatively small and can't hold large items.

 

Large double bowls can also hold large pots as long as the volume of the bowl is large enough. Can achieve the function of a large single bowl. The small bowl is used for water filtration, or install a water drying rack to wash fruits and vegetables.

 

The small double bowl is a bit inferior and can’t hold a wok or the like, but it’s still very convenient to have two bowls. The use of dual bowls saves time and effort and improves efficiency.

The double bowl originally has more functions than the single bowl, because most large double bowls will have accessories such as colanders and drying racks. It can be used in partitions, which is unmatched by a single bowl.

 

When washing vegetables, pots and pans, you can separate the two to avoid greasy vegetables. It can also be used separately when washing pots and pans alone. One sink for washing and one sink for draining water. And it can also save water.

 

One bowl for washing fruits and vegetables, and the other for washing dishes. 

 

The length of the double bowl is generally about 80cm. If the length of the counter is longer than 1.2 meters, double bowl can be installed. Many double bowls are designed as one big and one small. If you want to put the wok, the length of the large bowl should be more than 35cm, because the size of the wok is generally between 28cm-34cm. The disadvantage of the double bowl is that the sewer pipe is more complicated, and it is more prone to blockage and water leakage.

Therefore, if you choose a double bowl, it is necessary to buy a good strainer. If the inner wall of the drain is smooth, it is not easy to block. Some double bowls are equipped with threaded drain pipes, or relatively thin drain pipes, which tend to retain oil and cause unpleasant odors.

 

Above counter sink, under counter sink or one-piece sink?

Above Counter Sink:

All the edges of the sink are exposed on the countertop.

The cleaning of the above counter sink is very inconvenient. Over time, the glass glue on the edge of the sink will easily become moldy and black. The picture below may cause emotional upset, but the reality is always so cruel!

 

But its benefits are also very obvious, easy to install and cheap. And because edges are over the counter, the bearing capacity is very good. In case it is really disgusting one day and we can't stand it anymore, it can be easily removed as a whole. The space under the above counter sink is about 3 cm higher than the under counter sink. What does this show? It means that there is a large space under the sink for storage!

 

Under Counter Sink:

One wipe, everything is gone. The under counter sink is lower than the countertop. The water, residues, and vegetable leaves on the countertop will be in the sink with a single wipe. Super convenient. Generally speaking, the under counter sink is quite easy to clean. And it is very beautiful.

 

However, the installation of the under-counter sink is also more complicated. Not only do you have to prepare more installation costs, you also need to remind the decoration workers. Otherwise, it will generally be installed as an above counter sink.

 

In addition, once the under counter sink is damaged, it cannot be repaired and needs to be replaced as a whole. If the under-counter sink is used for a long time, the cracks will be moldy, so the mold-proof glue should be used between the under-counter sink and the countertop.

 

One-piece Sink:

Finally, the one-piece sink. One-piece sink refers to a sink that is an integral part of the countertop. It usually appears in the overall cabinet, and the countertop and the sink are seamlessly connected. The advantage is that there are no gaps, there is no need to worry about mold, and it is really easy to clean up. The disadvantage is that it is very troublesome to replace, which is equivalent to dismantling the entire counter.

 

In short, whether it is stone, stainless steel, or ceramics, whether it is a single sink or a double sink, it depends on the situation of your own house. As long as you choose the right material, bowl size and quantity, installation style, you can choose the best sink for your home.

Speaking of bathroom, the first thing many people think of is that we must separate wet and dry functions. After all, the traditional integrated type is too inconvenient to use. The bathroom is always wet, and even the towels have a musty smell. With the improvement of people's living standards, more and more people hope that the bathroom can be truly hygienic.

 

Three-way separation, that is, the basin area, shower area and toilet area are completely separated.

Advantages of three-way separation:

First, each washing area is an independent space, ensuring privacy while isolating smell and humidity;

Second, improve safety, especially for families with the elderly and children, and reduce the possibility of slipping due to water in the bathroom;

Third, ensure the cleanliness of the bathroom, and extend the service life.

 

How to create a three-way separation for a 3 square meter bathroom?

 

Square Layout

As soon as you enter the room, it is the washing area, which is the most frequently used area in the entire bathroom, so placing it at the door does not affect the use of other areas.

 

The middle position is the toilet area. The small toilet is separated by a baffle to form an independent space. If you feel that it is not private enough, you can install a small shower curtain to completely separate the toilet area. This is generally not recommended. After all, it affects the appearance, and it also gives people the feeling of being cramped.

 

The square space uses all the walls. A few niches or horizontal partitions are placed on one end of the bathtub to hold bath towels and clothes. The bath area is designed in the innermost part, the edge of the bathtub itself is an isolation belt, and the shower head is installed on the wall at the other end of the bathtub, which is convenient and does not take up space.

 

Although the square space is not very easy to handle, it can be regarded as "excellent brushwork" through this elaborate design.

 

Rectangular Layout

Compared with a square bathroom, a rectangular space will make the best use of everything.

The same is the wash area next to the door. The difference is that the rectangular space also has a place to put the washing machine. When you take a shower, you can throw your clothes into the washing machine.

Placing the toilet and shower in parallel on the innermost side and covering the tub with a shower curtain.

 

The above are two designs of 3 square meters bathroom. Of course, there are more design styles, such as a sliding folding door instead of a shower curtain.

 

This folding door design not only saves space, but also has good privacy. Very practical. 

With some simple lighting, the bathroom can also be a beautiful scenery. 

The barn door design completely separates the bathroom area.

 

Bathtub

A small bathroom doesn't necessarily need a bathtub. But if removing the wall partition and replace it with a shower curtain, there will be  bathtub area.

Shower Room

The shower room can be placed in the triangular area at the corner of the bathroom to form a fan-shaped area, which is the most space-saving.

 

Toilet

It is best to use a small size. After all, if the toilet is too big, it doesn't seem to be of much use except for taking up space.

What are the precautions for the three-way separation?

 

Color Tone

Because the space is relatively small, the tones of the floor tiles and the walls should be matched reasonably. It is best to focus on warm colors, which are swelling colors. They have the effect of "expanding" the space.

 

Mirror

Try to choose a mirror as large as possible. The role of a large mirror is the same as the color tone, which increases the sense of space.

 

Storage

The corners must not be wasted. Simple wooden shelves and niches are good storage methods.

 

Ventilation

The last thing we must pay attention to is ventilation. It is important to reduce odors. 

1. Material:

The common faucet materials on the market today are: stainless steel, plastic, brass, zinc alloy faucet, etc. 

Brass:

Brass is the most common material for faucet manufacturing. It is made of international standard H59/H62 copper. The casting adopts steel mold for gravity casting, and its wall thickness is uniform, generally 2.5-3.0 mm. The faucet made of brass is characterized by: no rust, durability, anti-oxidation, and sterilization effect on water.

Zinc Alloy:

The density of zinc alloy is lower than that of copper, and the handle is lighter. The surface of zinc alloy is easy to oxidize from the inner wall, and white oxide powder will appear on the surface. The strength is much worse than that of copper. The service life is not long, and the lead content is high.  After one to two years, the faucet made of zinc alloy will oxidize and rot.

Plastics:

Plastic faucet has the characteristics of corrosion resistance, aging resistance, no rust, lead-free, non-toxic, odorless, high pressure resistance, light weight, easy construction, and low price. Plastic is not wear resistant.

Stainless Steel:

Now health and environmental protection has gradually become the new themes of modern life. Stainless steel is an internationally recognized healthy material that can be implanted into the human body. Therefore, kitchen and bathroom products with stainless steel as the main material have begun to become popular in European and American countries. 

More than 90% of high-end faucets are made of brass. Brass is the most suitable faucet material and has antibacterial effect. Among them, H59 copper is most used. Its lead content is qualified. H62 copper’s lead content is less and more corrosion-resistant. Although stainless steel can be lead-free, but the quality is worse than copper due to the complex process and no antibacterial performance.

2. Faucet Manufacturing Process:

Most of the faucets on the market under $20 are made of sand mold casting, which is commonly referred to as "sand foundry". The internal structure of the valve body metal is loose, and it is easy to form interior defects such as stomata. It may not be found in appearance. However, after a period of use, defects such as water leakage, inadequate sealing and even more severe defects will occur. High-grade faucets usually adopt gravity casting, and the internal structure of the valve body metal is dense. For the same valve body, the weight of the products produced by the two processes is different, and the consumption of materials is also different. The weight difference between gravity casting valve body and sand casting valve body is about 1/4. Therefore, the same product has different prices.

3. Cartridge:

The faucet is turned on and off every day. The cartridge determines the service life of the faucet. At present, ceramic is the most suitable material for home use. The high-end faucet cartridge mostly uses ceramic, which is durable and can be opened and closed for 500000 times without leakage.

 

4. Water Hose:

The water inlet hose of the high-end faucet adopts pure 304 stainless steel. 304 stainless steel can bear high water pressure and ensure water purity.

 

5. Aerator:

The aerator of high-end faucet can give users a very comfortable bathing feel. The use of these accessories and materials can ensure the quality of the product. And whether or not to use the NEOPERL aerator is an important factor in judging the quality of the faucet.

 

6. Surface Technology:

The electroplated surface of high-priced faucets usually has a mirror-like feel. When you press it with your finger, the traces of hand prints will disappear immediately. Moreover, advanced environmental protection electroplating technology can prevent secondary pollution of products and ensure the purity of water.

 

7. Service Life:

The quality of high-end faucets is still good after 5 years of use, and meet all the national water-saving requirements. The durability, water-saving and environmental protection are its highlight value. Cheap faucets have a very short service life. After two or three months of use, quality issue may occur. And their safety is low.

 

8. After-sale Warranty:

High-end faucets are produced by professional manufacturers with a comprehensive after-sales service system. No matter the product has an accident or failure, the manufacturer or distributor will be responsible for solving it at any time. The manufacturers that provides higher price products are mostly more qualified, and they are very concerned about sales and reputation generated by each product.

All Aquacubic products that are finished in the production department have to pass their inspection first. There will also be the special inspection personnel to conduct an additional inspection to ensure that every product delivered to consumers is qualified. 

Aquacubic provides "Quality Bath & Kitchen Solution" to our customers.
Quality is always the first priority of Aquacubic. We understand the importance of quality to our clients, and quality is the foundation for long -term cooperation. To deliver high quality products, we established the whole quality system from raw materials checking to mass production audit and final products inspection. Most of our products are CE and CUPC certified.

Cooperating with Aquacubic is cost saving. Aquacubic make great investment in machines to increase production efficiency. Thanks to long existence in the industry and good relationship with material suppliers, Aquacubic has good cost control system and bargain power, to ensure competitive pricing for our customers. 

Once you contact with Aquacubic, you will find yourself are in service of a hardworking, reliable, sincere team with good communication skills. Our associates also provide value-added service for design, test report, shipment arranging, freight cost control and so on.

Bathroom faucet brings a modern style to any bathroom setup. Daily washing task is made easier by the classic one-handle lever design of this faucet, which offers effortless control of the steady and clear waterstream. H and C markings help guests easily control water temperature for a better experience.

Nano kitchen sinks will still look brand new even after years of usage. The smooth coating is more resistant to scratches compared to other sink materials present in the market right now.  You can also use it to give  your pet a lovely bath. No worry about scratch, Your pets will never scratch the tub.

The handmade wokstation stainless steel undermount sink is revolutionary to say the least. With a unique corner design, you get all of the beauty of a designer stainless steel sink while meeting your every day kitchen needs. It is as functional as it is fabulous. It's seriously the best of both worlds. Created with premium stainless steel, this hardworking sink with a ledge features placing various accessories on it for prep cooking easily.

Aquacubic has rich experience and passion in bath and kitchen industry and appreciate for your contacting and business.

Ordinary sink, also known as drawn sink, is formed by pressing and stretching a whole piece of steel plate.

The principle is similar to balloon blowing, so the bottom and corner of the water sink will be thinned properly, 

usually made of 0.8mm thick steel.

The Handmade Sink is not made piece by piece by hand, but made by cutting, bending and laser welding the steel plate.

Will not change the thickness of the steel plate in the corner, the sink is very sturdy and solid. Usually this thickness is 1.2-1.5mm.

The appearance has strong sense of line, and the weight is much heavier.

The small R angle of handmade sink is not only better in appearance, but also higher in the utilization of the whole sink space.

1. X Grooves Design

Optimized bottom slope makes kitchen sink draining faster than normal sinks. Gently sloped bottom, fast draining and dry after using.

Handmade X grooves design, not only increase the design aesthetic but also easy to drain water in a minute.

Rear set 3.5”drain matches most kitchen appliances and fits the most Common Garbage Disposal System and unlocks extra space.

2. Nano Surface Technology

Nano surface as Lotus leaf. Water and oil flow quickly and no trace left.

Hardness of Nano surface: ＞8H Hardness of regular surface: ＞4.5H

Extreme craftsmanship focuses on every detail of the sink.  Meets the UPC, cUPC, CE certification standards.

3. POSCO 304 SUS Material

Durable scratch and stain resistant stainless steel surface helps the beauty last.

Real 16 / 18 gauge material; never chip or crack. Commercial grade satin finish. Thick 304 Stainless Steel construction.

9 - 10 inches deep large sink can hold a lot of pots and pans. Experience the luxury brought by the global high-end manufacturing industry.

4. Soundproof Pad - 7pcs

Extra-thick coating and thick sound rubber pad assure exceptional noise reduction.

Insulative padding can dramatically reduce the noise causing by water dripping,making an excellent effect on noise elimination.

It can enhance the elegance and high quality of the kitchen, and it will become the focus of your kitchen. The high quality of the sink is praised and recognized by the most demanding customers

 

What kind of faucet is good?

 

Is it expensive? Seriously, price is one aspect of course. We must also consider these:

 

1. Faucet Cartridge

Cartridge is the heart of the faucet. According to the material, there are ceramic cartridges, stainless steel cartridges, and brass cartridges available on the market.

 

After the faucet has been used a long time, there may be a dripping problem. We may think the handle is not closed tightly or the handle is loose. In fact, the problem is often not the handle, but the cartridge hidden inside is beginning to age. The quality of the cartridge is a decisive factor affecting the service life of the faucet.

 

Ceramic cartridge is currently the mainstream cartridge on the market. It is wear-resistant, high-temperature and aging resistant, not easy to rust, good sealing, long service life, and less water pollution. Stainless steel and brass cartridges are also good choices. But bad brass and stainless steel materials are easy to rust, accumulate scale and affect water quality.

The Aquacubic cartridge is of higher quality than ordinary cartridges. It is made of ceramic and is integrally sealed with glue. It can adapt to various environments to ensure that the faucet will never leak under any severe conditions. It is durable, energy-saving and environmentally friendly.

 

 

2. Surface Coating

The surface coating is related to the corrosion resistance of the surface of the faucet.

In this regard, the electroplating corrosion resistance test in China is divided into 1-10 grades, and the tenth grade is the best. Aquacubic faucet can pass 24-hour acid salt spray test. The surface treatment reaches the highest tenth level. The surface should be smooth, and there is no uneven rough feeling. And it is corrosion resistant. 

Of course, if you want a better coating, you can choose anti-fingerprint brushed nickel finish. Through a special process, the surface of the faucet is not easily stained with fingerprint. The best choice for cleaning enthusiasts.

 

 

3. Main Material

The main material is the main part of the water flowing through. 

If the main material is not good, it will affect the quality of the water we drink! Two materials, brass and stainless steel, are more common on the market. It is worth noting that 59 brass is relatively high-quality brass material. Inferior brass may cause water pollution. Aquacubic faucet body uses 59 brass. In order to let customers use healthy water, we use low lead brass to minimize the precipitation of harmful substances in waterways and remove harmful heavy metals. Drink healthily and rest assured.

The sink must be installed in the bathroom? Take a look at these locations that may be more suitable for sinks in your new home!

As a patient with lazy cancer, where to put the sink determines how many steps I have to take to wash my hands. Do I have to go to the bathroom after eating snacks and watching a drama at night, and getting up to wash my hands? Can't the sink be placed at the door? Put it under my nose? Or even in the balcony close to me? The answer is yes.

 

01. Where should the sink be moved out of the bathroom?

In order to make it easier for you to use, we will give you a few common places to put the sink. It can be installed in the hallway. There may be few people who think of this, but it is very common in Japan. As long as space permits, they will find a way to add a sink near the hallway so that they can wash their hands as soon as they enter the house. In addition, the sink can also be used as a partition of the entrance, so that even the entrance hall is made.

 

Put the sink on the aisle at the entrance of the bathroom. In this way,  the dry and wet separations can be easily realized. Because the washbasin only occupies a small area, the total space will not become small.

 

If you are worried that the total appearance will be affected by putting it outside, and later storage can not be done well and it is messy, you can directly weaken it visually during the renovation by adding a wall to enclose it.

 

Wooden fences or glass can also be used as partitions, and cabinets can be used for storage on top.

 

The glass partition can prevent water from splashing everywhere when washing hands, and keep the space visually transparent.

 

If there is a gap between two rooms, you may consider putting the sink here. Such as between two bedrooms, between the kitchen and the bathroom, etc.

The advantage of this is that it can make full use of the space and avoid the waste of repeated settings. At the same time, it can also have the function of dividing space. It can also be installed on the balcony. Modern people spend most of their time in the living room. If you put the sink on the balcony closest to the living room, because there is plenty of light and the view is open, will you feel better when you wash your hands?

We can also put the washing machine next to it, throw the clothes in and wash them.

It is relatively rare to install on the dressing table. A dressing table can be placed in the bedroom to store all kinds of small things, and it can be combined with the sink. Sinks can be installed in the bathroom, outside the bathroom, or between the cloakroom and the bathroom.

According to our thoughts, these may seem strange, but starting from the owner’s living habits, it seems to be a reasonable design. Tip: The disadvantage of placing the sink outside the bathroom is the laying of water and sewage and waterproofing. Need to discuss with construction workers in advance and implement as required. Waterproofing should also be done well. It is recommended to follow the waterproof standard of the dry area of the bathroom, and apply waterproof paint at least 30cm high on the wall near the sink and on the floor. Secondly, there is no door to block the washbasin outside. If the storage is not done properly, the messy scene will be directly exposed. Therefore, the corresponding storage function must be done well, and the choice of towels even become stricter. Otherwise sit in the living room and see a messy washing area.

02. An easy-to-use sink can be like this.

In addition to moving the washbasin, its appearance and comfort should also keep up. You need to know the following knowledge. The style of the washbasin: Above counter basin and under counter basin. Above counter basin has a super good looking. In addition to square, round, oval, there may be other petal shapes to choose from. Generally they can be matched with high body faucets.

The under-counter basin is installed under the countertop and glued to the countertop from bottom to top. The advantage is that it is very convenient to clean the countertop. It is very common to have water on the countertop, you can easily wipe the water into the basin. It is more convenient to have a mirror cabinet, and the storage capacity can be improved a lot. Some mirror cabinets are fully enclosed, and some are partially open for storage. What kind of mirror cabinet to choose depends on your living habits.

Lighting Design.

Light is a top requirement for looking in a mirror. Most people may only install a mirror headlight above the mirror. In fact, the best way is to set up lights on the left and right sides of the mirror, which is about one person wide. Many professional dressing tables are set up in this way.

Double Basin Design

The double basin design can improve life efficiency. For example, a family of four has to go to school and work at the same time. And two people washing together is also very warm. Of course, double basins may only be suitable for large bathroom space.

Basin Style

It can be a basin or not. An artistic design. For example, in a retro-style home, try a bicycle wash basin.

 

There are also a few stacked stones. Is there a trace of natural "spring" style when the water runs out from the stone?

 

If you like minimalist style, consider this transparent glass wash basin.

 

If you want to realize the separation of dry and wet, but in the small area of the bathroom it cannot be realized, the above method can be considered. It is indeed completely reasonable and feasible to move the sink out.

Kitchen Design

When designing a functional kitchen, the rule of triangles should be kept in mind. That is, the sink, stove and refrigerator are arranged in a triangle. The L-shaped kitchen fits this triangle shape very well. The L-shaped layout is most suitable for small and medium-sized kitchens. The first-class kitchen is not only about the layout, but also about creating delicious food through the inspiration of the right layout.

1. Industrial style kitchen design.

 

2. This sweet gray kitchen is equipped with golden cabinet handles and natural wood fittings. The table with green leaves adds a lot of color to the small kitchen, which can maximize the dining space in an instant.

 

3. The wine glass is the focus point of this home, highlighted by the light from the strip lights in the glass cabinet.

 

4. If because of space reasons, wall cabinets cannot be customized. An open kitchen can be realized by gradually narrowing the cabinet width.

 

5. Design a peninsula in the center of the kitchen by extending the cabinets.

 

6. Here is not only an L-shaped cabinet, but also a floor of the same shape.

 

7. Choose white locker. And choose blue floor cabinets and wall cabinets to break the appearance of one color and long layout.

 

8. If the kitchen has a window facing the outside, the kitchen sink can be located in front of the window, just like this green kitchen.

 

9. In this black kitchen, the ceiling extension is also black and equipped with spotlights. The accessory materials on the ceiling add color to the layout, and the two-color cabinets have unique light and dark design.

 

10. A series of pink designs and copper accessories are matched with pink blue decorations to exude perfect contrast and warmth.

 

11. The golden honey color and black bring the perfect color combination to the light gray and white kitchen.

 

12. The golden faucet, silver oven, copper vases and candle holders add highlights to the white kitchen.

 

13. You can merge two separate rooms together, like this kitchen with a washing machine.

 

14. The floor cabinets and wall cabinets are right-angled and uniquely arranged.

 

15. Use two rows of wall cabinets of different depths to break the rigid arrangement of parallel double rows.

 

16. L-shaped wall cabinet with recessed lighting. Create a unique kitchen layout through a series of different color combinations.

TORVA 18 x 18 Inch Gloss Black Drop-in Topmount Kitchen Sink, 16 Gauge Stainless Steel …

Luxury - Modern. Luxury - Modern; Sensible - Unique. Sensible - Unique; High-Contrast - Generous. ... Allegro E Pot Filler, Wall-Mounted. USD 1,240.00. Allegro E Gourmet HighArc Kitchen Faucet, 2-Spray Pull-Down, ... Extension length Up to 30" (50cm) Download center Product Data Sheet (PDF)

A pot filler tap can add a touch of professional and practical convenience and versatility to your kitchen. Available in a range of finishes which include Chrome, Nickel, Pewter and Gold, or opt for a more traditional finish such as Brass or Bronze Sort By: 1- 4 of 4 items Save ￡77.99 Abode AXIAL Stainless Steel Pot Filler

Blanco Precis 30" Single Bowl Silgranit Sink, White, Modern by BLANCO (2114) SALE

The gold finish wall mount sink faucet is the star of this bathroom but the Brushed Gold bathroom accessories add little touches of luxury throughout the space. Whether you install gold bathroom faucets, or decide to go with a different …

Brizo 62810LF-PC Traditional Classic Wall Mount Pot Filler: Chrome AXOR AXOR 10859801 Starck Pot Filler Wall: Steel Optik AXOR AXOR 16859001 Montreux Pot Filler Wall-Mounted: Chrome AXOR AXOR 10859001 Starck Pot Filler Wall: Chrome hansgrohe Hansgrohe 04059860 Allegro E Pot Filler Wall Mounted: Steel Optic Franke

Details and Price about Faucet Tap from Kitchen Faucet Home Cold and Hot Water Brass Single Hole Handle Swivel Water Mixer Tap Kitchen Sink - Wenzhou Zhongsheng Sanitary Ware Co., Ltd. Sign In Join Free For Buyer Search Products ...

Contemporary (25) Traditional (46) Material . Brass (4) Feature . ADA (575) Cec (3) Valve Included (3) Mounting . Counter (70) Handle Type . Cross (23) Lever (23) Flow Rate GPM . ... Deck Mount Pot Fillers . View Details. Add to Cart . Watermark Wish List. Deck Mounted Pot Filler. 111-7.9-SP4-AGN. 26 Finish Options; Deck Mount Pot Fillers ...