Tub Faucets - China Manufacturers Suppliers Factory

The bathroom area is small, but it needs to be equipped with sinks, cabinets, washing machines, showers and toilets. There is a new way by changing the water route in advance to move the basin outside the bathroom!

Simplify the Bathroom

If you want the washbasin to be outside the bathroom, the most feasible way is to move the door of the bathroom inward to ensure the privacy of the toilet and bathing area.

This approach is actually the traditional "dry-wet separation".

But the difference is that the original washroom door does not need to be installed, and the basin area and the outer area are more integrated.

 

A sliding door can be installed between the toilet & the shower area and basin, or a specially customized water resistant door. The floor tiles at the basin area can be designed as a unified design with the outside of the bathroom.

 

The laundry area and the basin are integrated on the outside, because it is not afraid of moisture, the towel basket does not need to be stuffed in the cabinet.

The overall space has not become more crowded by adding walls. Entering the door, the bathtub and shower head are immediately visible and easy to use.

 

Generally, ultra-thin lightweight partition walls are used, and waterproof coatings are also applied, so there is no need to worry about the partition walls being too thick or not moisture-proof.

Move the basin outside the door

 

The size and layout of the bathroom are not satisfactory, so let the washbasin truly stand outside the bathroom door!

Where should I install the basin outside the bathroom door?

First of all, it is recommended to be as close as possible to the original sink drain pipe, which is convenient for construction and saves labor and money.

 

Secondly, consider the habit of daily use of basins. For example, every morning, if you and your family can't wash and go to the toilet at the same time, put the basin near the bedroom.

You can brush your teeth and wash your face when you get up in the morning and go out.

 

If there is a corridor end or a concave wall near the toilet, it is most suitable to install the sink cabinet.

But it doesn't matter if there is no concave wall, self-built partitions are equally beautiful. 

The lockers for bathing products can be placed above the basin together. In this way, the remodeled bathroom will be more refreshing and easy to take care of.

 

The wash basin can be placed on the balcony.

The wash basin is placed on the balcony because it does not occupy the kitchen and bathroom space, and it is convenient to dry the towels after washing.

Now that the water pipe has been connected to the balcony, you can also plan a good-looking basin. In addition to washing, water for watering flowers and boiling water can be obtained here.

 

For a family with one bathroom but three generations living together, one more basin can reduce a lot of inconvenience in life.

Make a simple-style balcony hand-washing area. It’s more convenient to wash your hands and fruits now.

Wash basins can be hung on the wall. 

The washbasin can also be hung on the wall to play its function, but it will involve all kinds of wall drilling. And it can’t be moved after it’s built, so consider carefully before decorating it.

The best place to put a basin in the bedroom.

The cosmetic storage cabinet can be installed under the basin. Daily skin care, makeup, and makeup removal can be done easily.

 

If the toilet is close to the hallway, install a basin beside the hallway to enrich the functions of the hallway.

 

The dining room can also be equipped with an independent basin, and the water pipe can be taken from the kitchen at the beginning of the decoration.

 

Installing the basin outside the bathroom, in addition to being practical and convenient, can also match the overall style of the home. The washbasin can be integrated into the design of the cabinet, and the surrounding waterproof treatment should be done.

Sanitary ware is a must-have for household life. With the improvement of people's living standards, the market has been expanding. And after years of development, China's sanitary ware output has become the world's largest.

Competition in the low-end market is fierce. And difficult to enter the high-end market.

In recent years, China's sanitary ware market has been in a state of rapid development.

However, most sanitary ware companies have not been able to keep up with the pace of development, and management and marketing have not been standardized. The quality of employees is not high. Only a few companies have operated some well-known brands and opened up channels. This leads to vicious competition between enterprises and the market is occupied by a very small number of large and well-known enterprises.

 

The disadvantages of small sanitary ware companies are even more obvious: small scale, single product, outdated equipment... seriously lacking in competitiveness.

And several large foreign brands not only control the high-end market, but also become more and more competitive in price. They are gradually penetrating into the low-end market, which is an unprecedented test for small and medium sanitary ware companies.

 

Secondly, various costs such as materials and labor are rising. The rising cost puts more and more pressure on sanitary ware companies. In the face of many competitors, they have to increase advertising investment. By compressing their own profit margins, try to gain customers and open up sales.

For sanitary ware companies, especially small and medium-sized enterprises, it is tantamount to worsening the situation.

Some people say that the Chinese sanitary ware market is "handed over" by the Chinese themselves.

Only by occupying the high-end market, the enterprises can have a position; on the contrary, the smaller the share, the lower the position.

 

It is understood that China has become the world's largest bathroom consumer market. The performance and quality of many domestic sanitary ware brands have reached or even surpassed that of foreign brands. However, foreign sanitary ware brands have almost monopolized China's high-end sanitary ware market with their strong financial strength and high brand awareness.

In addition to historical reasons, the lack of brand awareness of domestic companies is an important reason for this situation.

Sanitary ware has been continuously developed and improved. More and more consumers not only pay attention to product price, quality, and after-sales service when buying sanitary products, but also pay attention to brand awareness and business reputation.

 

If the company still stays in the business philosophy of the seller's market in the past, it will definitely be at a disadvantage in market competition, and even be ruthlessly eliminated by the market. The sanitary ware industry has entered the era of brand marketing.

 

Liberate the shackles and keep up with the times

According to statistics, China's annual demand for ceramic sanitary products has reached 34 million pieces. It has become the world's largest consumer market for sanitary products. Last year, the output of ceramic tiles and sanitary ware products reached 7.5 billion square meters and 177 million pieces respectively. They account for 60% and more than 40% of the world's total output of architectural sanitary ceramics. The annual growth rate of products exported to Europe, the United States, Japan, South Korea, the Middle East and other places is 50%.

From the analysis of this trend, the Chinese sanitary ware market is quite optimistic. With a large amount of rigid demand, it can be said that the market is very good.

 

However, due to the comprehensive factors such as rising raw material prices, rising labor costs, and continuous floods and droughts this year, the domestic ceramic industry is in a downturn.

In response to the frequent occurrence of "overcapacity" and "market saturation" in the industry, the profit margins of small and medium-sized bathroom companies will be further compressed. More and more rational consumers do not intend to pay for it. The pressure of product backlog is considerable, and some Chinese factories have to stop running some production lines.

 

The ceramic sanitary ware industry is still very traditional in terms of management and marketing. Employees lack technical expertise. Therefore, only a very small number of companies have relatively well-known brands and relatively complete sales channels.

Many companies' own sales channels and sales management are obviously not standardized enough, and marketing is weak. The sales of products depend on a good relationship with distributors.

 

In addition, many companies do not have the ability to operate brands, a systematic business model and a professional marketing team; no accurate market information; no customer-oriented service standards and customer-oriented service system; no market-oriented research and development, production, and supply system. The capital investment cycle is long and the risk is high. All of these will become a time bomb that puts enterprises at high risk, and may be deadly at any time.

In summary, it is not difficult to see that an enterprise's internal operation management system urgently needs to be established, and market standards urgently need to be standardized. In addition, companies can stop running part of the production line, digest inventory, and wait for the peak sales season. Because there is real rigid demand, as long as the product is done well, no matter how the market environment changes, a certain effect will eventually be achieved.

 

The following are three suggestions for improving the status.

 

Keep Up with Quality

At any time, the quality is everything and will not lag behind. Consumers who spend money on goods, especially a household product, will certainly not tolerate quality problems. Update production equipment and other infrastructure. Although the cost is high, if you don't invest, it's just waiting to die.

 

Sales Channel Expansion

In the past, the marketing of sanitary ware companies relied on good customer relationships to a large extent. Lacking the ability to operate the brand; there is no standard customer service system and professional marketing team. These all increase the profit risk of sanitary ware companies invisibly. This is also an important reason why many sanitary ware companies say that "the product is good, but it can't be sold."

 

Keep Up with Service

Compared with methods such as updating equipment and adding stores, the investment in service quality improvement is much lower than the previous two. Moreover, there are more and more high-quality sanitary products in China. Whether to develop high-quality, considerate and personalized services to bring customers a better service experience has become most important for the product to stand out.

The bathroom is the wettest place in the house, and it is easy to breed bacteria if it is not properly cleaned. Next, learn these tips to make the bathroom as clean as new!

Clean the Faucet

Does the water stain on the faucet look dirty? Water stain can be removed with one trick! Mix the white vinegar and baking soda powder evenly, put the toilet paper in and soak it completely, then cover the faucet for 30 to 60 minutes, uncover it and rinse with water.

Cleaning the Shower Head

If the shower head is used for a long time, there will be a layer of scale on the surface, which looks dirty, and even more serious it will block the water outlet! You can take a plastic bag, pour white vinegar, wrap the shower head and fix it with a rubber band, soak it for 1 hour and then dry it with a dry towel. The shower head will be as clean as new. A clean shower head is much more comfortable to use!

Cleaning the Toilet

1. For yellow stains that are difficult to remove in the toilet, you can sprinkle with baking soda and soak in hot water for half an hour before washing. Remember to cover the water outlet on the inner edge of the toilet with toilet paper soaked in baking soda solution to achieve the purpose of soaking. The same goes for squatting toilets!

2. If conditions permit, you can remove the toilet lid and clean the gap.

3. Add some white vinegar to the water tank, which not only has the effect of disinfection and sterilization, but also removes the scale attached to the inner wall of the water tank.

Cleaning Bathroom Tiles

The joints of toilet tiles can easily turn yellow and black. Dip and use a toothbrush with washing powder, toothpaste or baking soda can effectively brush off stains. Remember to clean up water stains every time you use the bathroom!

Cleaning the Exhaust Fan

Exhaust fans can help keep the toilet dry, but because of the inconvenience of cleaning, it is often overlooked by us and becomes a place to hide dirt!

1. Remove the fan cover, soak it in soapy water and wash it, and then dry it.

2. Soak the rag in soapy water, wring it out, and carefully scrub the fan blades and vents. Finally wipe it with a dry towel.

3. Install the dried fan cover as it is.

Cleaning the Mirror

Bathroom mirrors are often stained with toothpaste, water stains and other things. At this time, you might as well use the leftover black tea bag to gently wipe the spots on the mirror, and then wipe it with a dry cloth to restore it to new.

Clean Rust Stains

The bathroom is damp. In case the metal utensils rust, you can cut the lemon in half, squeeze the lemon juice on the rust stains, soak for 10 minutes, brush off with a brush, and finally clean it with clean water.

There are many bottles and cans in the bathroom. You can apply a layer of nail polish on the bottom of the rust-prone material in advance to prevent rust.

We all dream of having a spacious bathroom, preferably a separate bathtub and shower, two sinks, and even a comfortable lounge chair to rest after bathing.

So, today we share with you 10 bathroom design principles. You can use some or all of these techniques to double your bathroom space.

01. Use White Color

One of the easiest ways to make a space look spacious is to use a lot of white: white tiles, white wall paint, white accessories, etc. White allows other colors to recede naturally, making the space look bigger. It can reflect any light instead of absorbing it.

The use of white is particularly effective in the bathroom. Since the bathtub, toilet and sink in the bathroom are basically white, the use of other white can make the space seamlessly connected, making the space transparent and creating a sense of expansion.

 

Using a lot of white does not mean pale and empty, lack of personality. Using different structural elements, such as light-colored stones or tiles with different textures, and a small amount of metal or wood intervention, can maintain a seamless appearance while also presenting the richness of the space.

 

02. Use Same Style Color

If you are not a fan of white, you can use warm beige, soft gray or even pink (pink blue, pink, etc.) to create a sense of spaciousness. Choose an elegant ceramic tile, and choose the matching color system for the rest of the wall. The overall effect is quiet and warm, and will not cause visual breaks and reduce your sense of space.

 

03. Use Floating Design

In a compact bathroom, balancing storage needs and a sense of spaciousness and freedom is a tricky issue. The suspended wash basin design is a good solution. It gives you a lot of space to store essentials. The empty space at the bottom is like an entrance and exit for air flow, which does not make people feel oppressed and tense.

 

04. Less is More

Less is more. If it is not necessary to have a large storage area, use small-sized wash basins to leave more open areas to make the space look bigger. If there is a bathtub next to the toilet, you need to leave enough space.

 

05. Use a mirror to enlarge the space.

A large enough mirror can double your space, especially in the bathroom. However, this kind of large mirror must be of good quality, and the size and thickness must be accurate, otherwise it will seriously affect the overall layout. A good mirror will have a very powerful effect, and you can make the room look perfect in just a few minutes.

 

06. Use Glass Doors

Another good way to expand the space is to use glass as a partition for the door or shower room. The visual extension makes the space look bigger. Especially in the shower.

 

If you are worried about privacy, you can use frosted or tinted glass, which can still achieve the effect of light transmission and will not make you feel cramped and depressed in the shower. If there is no special need, it is recommended to abandon the bathtub and install a shower room. The bathtub consumes a lot of valuable space, and the usage rate is extremely low.

 

07. Design a Suitable Alcove 

Designing an open alcove in a suitable location can not only increase the storage space, but also increase the visual depth, making the wall look far beyond the real distance.

 

When designing alcove, you must communicate with professionals, because there will be many wires, pipelines, etc. in the wall of the bathroom.

 

08. Good Lighting

Good lighting is essential to make any space look bigger and more open, especially in bathrooms that don’t usually have much natural light. In addition, you also need good lighting in the bathroom to effectively perform shaving or makeup, so its importance does not need to be emphasized.

 

The key is to have a rich lighting scheme in the bathroom, and it is best to use multiple light sources in different locations. Ceiling lights (multiple bulbs can be used), or modern edge-lit mirrors will help you avoid shadows and make the space feel bright and open.

 

09. Create Long Lines

Whether your bathroom is typically rectangular or oddly shaped, you can always find a wall or area that is slightly longer than other places. Adding a shelf, a tile strip, or even a simple striped wall paint to these areas can help you lengthen the longest line in the room and draw the sight to the farthest position, giving the space a sense of extension.

 

10. Balance the Horizontal and Vertical Ratio

If your bathroom is already very long, narrow and tunnel-shaped, don't emphasize the length anymore, you must think more about stretching the width visually.

For example, in this long and narrow bathroom below, the tiles on the wall and the floor are laid in a horizontal splicing way, which invisibly increases the visual width, and the spatial balance becomes more harmonious.

Speaking of bathroom, the first thing many people think of is that we must separate wet and dry functions. After all, the traditional integrated type is too inconvenient to use. The bathroom is always wet, and even the towels have a musty smell. With the improvement of people's living standards, more and more people hope that the bathroom can be truly hygienic.

 

Three-way separation, that is, the basin area, shower area and toilet area are completely separated.

Advantages of three-way separation:

First, each washing area is an independent space, ensuring privacy while isolating smell and humidity;

Second, improve safety, especially for families with the elderly and children, and reduce the possibility of slipping due to water in the bathroom;

Third, ensure the cleanliness of the bathroom, and extend the service life.

 

How to create a three-way separation for a 3 square meter bathroom?

 

Square Layout

As soon as you enter the room, it is the washing area, which is the most frequently used area in the entire bathroom, so placing it at the door does not affect the use of other areas.

 

The middle position is the toilet area. The small toilet is separated by a baffle to form an independent space. If you feel that it is not private enough, you can install a small shower curtain to completely separate the toilet area. This is generally not recommended. After all, it affects the appearance, and it also gives people the feeling of being cramped.

 

The square space uses all the walls. A few niches or horizontal partitions are placed on one end of the bathtub to hold bath towels and clothes. The bath area is designed in the innermost part, the edge of the bathtub itself is an isolation belt, and the shower head is installed on the wall at the other end of the bathtub, which is convenient and does not take up space.

 

Although the square space is not very easy to handle, it can be regarded as "excellent brushwork" through this elaborate design.

 

Rectangular Layout

Compared with a square bathroom, a rectangular space will make the best use of everything.

The same is the wash area next to the door. The difference is that the rectangular space also has a place to put the washing machine. When you take a shower, you can throw your clothes into the washing machine.

Placing the toilet and shower in parallel on the innermost side and covering the tub with a shower curtain.

 

The above are two designs of 3 square meters bathroom. Of course, there are more design styles, such as a sliding folding door instead of a shower curtain.

 

This folding door design not only saves space, but also has good privacy. Very practical. 

With some simple lighting, the bathroom can also be a beautiful scenery. 

The barn door design completely separates the bathroom area.

 

Bathtub

A small bathroom doesn't necessarily need a bathtub. But if removing the wall partition and replace it with a shower curtain, there will be  bathtub area.

Shower Room

The shower room can be placed in the triangular area at the corner of the bathroom to form a fan-shaped area, which is the most space-saving.

 

Toilet

It is best to use a small size. After all, if the toilet is too big, it doesn't seem to be of much use except for taking up space.

What are the precautions for the three-way separation?

 

Color Tone

Because the space is relatively small, the tones of the floor tiles and the walls should be matched reasonably. It is best to focus on warm colors, which are swelling colors. They have the effect of "expanding" the space.

 

Mirror

Try to choose a mirror as large as possible. The role of a large mirror is the same as the color tone, which increases the sense of space.

 

Storage

The corners must not be wasted. Simple wooden shelves and niches are good storage methods.

 

Ventilation

The last thing we must pay attention to is ventilation. It is important to reduce odors. 

Product Diversification

At present, the concept of sanitary ware products has far exceeded the traditional concepts of the past. As a symbol of modern and luxurious life, it has entered all aspects of people's lives. That is, it not only has sanitation and cleaning functions, but also includes health care functions, visual enjoyment, and entertainment functions. The shape of sanitary ware products has appeared in one-piece type, basin series, bidet, or table-top series, etc. In recent years, sanitary ware products have also launched a series of complementary products with additional functions such as leisurely bathtubs, cabinet basins, and steam shower rooms. Therefore, in the future, it is self-evident that the sanitary ware market will show a diversified development trend.

Build A Complete Accessory Manufacturing Base

Now due to the increase and enrichment of new functions of sanitary ware products, the sanitary ware production of developed countries has been involved in a large number of accessories.

Therefore, a mature sanitary ware industry should be supported by more varieties of accessories and additional products. For example, the production of raw materials, glazes, pigments, models, machining, instruments, meters, copper work, and packaging and decoration materials that are closely connected with many sanitary ware production systems should be incorporated into the entire production system as soon as possible. The sanitary ware production industry in China urgently needs to form a complete industry group and supporting group related to sanitary ceramic production, and form a processing base for various related accessories that are compatible with the end products.

The Comprehensive Functions of The Product Are More Prominent

According to the shopping psychology of consumers in the international market, a good sanitary ware product must be able to satisfy a modern lifestyle and have a relatively complete set of functions. For example, in addition to satisfying the use function, it also needs to solve multiple functions such as water saving, energy saving, environmental protection, comfort, health care, anti-aging, and intelligent induction, and has obvious recyclability and a strong concept of green consumption. This requires a new generation of products that must be able to make full use of comprehensive high-tech achievements such as biotechnology, electronic technology, and induction technology to combine various new functions to improve the comprehensive functions and physical quality of sanitary ceramic products.

Rich Decorative Colors

In the past, sanitary ware products were often decorated with white glaze to show their white jade-like appearance. But the cool tone of its color makes many people feel uncomfortable. Nowadays, it is generally recognized that various opalescent white glazes are mainly used for the appearance of products with other colors and shades. China sanitary ware factories should use the coordination of various glazes to create a variety of popular new decorative colors. The changing rhythm of sanitary ware products, just like the promotion of popular colors in major international clothing exhibitions in the world every year, shows the visual function of leading new trends in colors from time to time. With the continuous updating of people's aesthetic perspectives and the rapid changes in domestic and foreign market demands, it is necessary to accelerate the development of a new generation of glaze decoration varieties and strengthen the new color decoration of products.

 

In short, China sanitary ware factories must continuously improve the technical content of export products, and continue to improve the grade and added value of export products. Continuously develop a new generation of new high-end products to meet the needs of domestic and foreign markets. It is conducive to entering the international high-end market. It is believed that China sanitary ware factories will become stronger.

 

Pull as you like. Return accurately.

When renovating the bathroom, the height of the faucet is a headache: if you buy a low one, you have to bend over when washing your hair or  face; if you buy a high one, It's not convenient for the opening and closing of the mirror cabinet. On the other hand, it will cause water splashing due to the large drop...It is not a problem with the Aquacubic faucet!

 

Aquacubic faucet adopts pull-out design. With 360 degree sprayer head to realize free rotation and pull freely, the water can reach any place where the user needs it, and meet all the needs in the bathroom water process. After use, just let go. The built-in gravity hammer can help the faucet retract easily and quickly. Users can experience the pleasure of face cleaning and hair washing in a new way.

Long lasting new. Easy to clean.

The bathroom is full of moisture. In such an environment, water stains or fingerprints are easily left on the surface of the bathroom faucet. Scales will accumulate on the faucet after drying. They are difficult to clean and even gradually corrode the coating and form rust spots on the surface. To make the bathroom faucet last longer, you need surface treatment technology with easy-to-clean coating.

 

Aquacubic faucet adopts precision electroplating layer and SRS surface treatment technology, and passes 24 hours acid salt spray test. The surface has an elegant metallic luster. They are wear-resistant and corrosion-resistant. Faucet will be bright as new with a light wipe. You don’t have to worry about leaving fingerprints and watermarks when you touch it with wet hands. This reduces cleaning time.

 

The bathroom carries most of the cleaning work of a family. In turn it affects the living experience and life quality of the whole family. If you want to enjoy the exquisite life, you need the Aquacubic faucet that can be pulled freely to bring a fashionable bathroom to you!

If not to consider the faucet valve core and aerator, lead-free brass faucet and general faucet mainly differ in the material and technology.

 

Ⅰ. Raw Materials

The main raw material of lead-free brass faucet is made of international standard H59 and H62 copper. The casting adopts steel mold for gravity casting with uniform faucet wall thickness of 2.2-3.0 mm.

The main reason for using brass is the antibacterial activity. This can prevent bacteria from growing on the inner wall of the faucet, which is an advantage that other materials (such as stainless steel and plastic) do not have.

 

Ⅱ. Surface Technology

Surface treatment is very important for lead-free faucet, which is related to the service life, finish and wear resistance of the faucet. High quality faucet surface electroplating is usually mirror effect. It can eliminate secondary water pollution and ensure water safety.

How to judge the quality of the surface treatment of a faucet?

It can be easily judged by the following 3 points:

1. A good faucet will have a moisturizing and shiny surface, while a poor quality will have a dim gloss;

2. A good faucet will have a flat surface, while a poor quality faucet will have a wave surface, even a dent.

3. Good faucets are more wear-resistant, and there are no scratches, but inferior products will have dense scratches on the surface.

Generally, the surface coating of high-quality brass faucet has only 2 layers, and the product can pass 48 hours neutral and 24 hours acid salt spray test.

Ⅲ. Production Process

The production process of faucet is generally the following 16 steps: 

copper ingot - dissolution - casting - cleaning after casting - casting inspection - machining - tolerance inspection - grinding - surface inspection - electroplating - electroplating inspection - assembly - pressure test - finished product inspection - packaging - delivery.

Each process has strict requirements for the production process.

The difference of faucet material selection and production technology determines that the price of lead-free brass faucet is generally higher than stainless steel and plastic faucets.

TARA ULTRA. PIVOT Single-lever mixer - Chrome. 33845875-000010. Chrome. € Please login to see prices. Please login to see prices. TARA ULTRA. POT FILLER Cold water valve - Chrome. 30805875-00.

Curved Shower Curtain Rod Bathtub Adjustable 42" to 63" in Oil Rubbed Bronze New

304 Stainless Steel Black Kitchen Sinks BH801H Size 780*430*200mm Large Bowl Size 380*370mm Small Bowl Size 325*320mm Suggested Hole Size 750mm*400mm Thickness 3mm Surface Treatment Brushed Colour Black Bowl Shape Rectangular ? : ...

KHT302-33-1610SFS Bolden 18-Inch Commercial Kitchen Faucet with Air Gap in Spot Free Stainless Steel Finish KPF-1610SFS-KAG-1SFS Bolden 18-Inch Commercial Kitchen Faucet with Air Gap in Matte Black/Black Stainless Steel Finish KPF-1610MBSB-KAG-1SFSB Bolden 18-Inch Commercial Kitchen Faucet with Air Gap in Matte Black Finish KPF-1610MB-KAG-1MB 1 2 3

This item: Sharemee - Bathroom Faucet 360 Degree Rotation, Basin Sink Faucet Single Handle One Hole Hot and Cold Washroom Mixer Tap Lavatory Vanity Vessel (Black Gold)

Pot filler faucets allow you to fill large pots and kettles directly on the stove, decreasing the need to carry heavy pots full of sloshing water across the kitchen. This faucet features the …

Kitchen Sink,New Stainless Steel Waterfall Sink,Bar Sink, 304 Stainless Steel Sink, with Cup Washer Sinks, Drop-in Or Undermount Installation (Color : Black-Grey, Size : 72x45x20cm) Brand: PetterShop

Gessi is the design manufacturer of luxury bath and kitchen faucets, showers system and electroni