











After the shower is turned off, the water still runs. Is it a quality problem?
Have you encountered a problem like this? After the shower was turned off, the water still ticked out. Sometimes after turning off for a long time, the water still flows out suddenly, and it flows fast. This is how it happened. Today, let's take a look at "The sudden water flow problem after the shower is turned off".
Regarding this problem, at first it was suspected that it was a shower quality problem. In order to clarify it, we also specially checked our showers, but this kind of situation still occurs. Later, we asked a professional to figure out that the water running after the shower was turned off was because of the water stored in the top spray and the shower pipe.
Professional explanation: In order to pursue the comfort of showering, the current shower head sprays are very large. The bigger it is, the more water there is after turning off the faucet. After use, the air pressure inside the shower is in equilibrium with the atmospheric pressure, so the water inside will not flow out temporarily. After some time, the water will flow out when the balance is lost. This is a problem with large-top showers. It is not that the shower is leaking or broken, so you can rest assured if you encounter this problem. If it is a constant dripping and leaking, then it is a quality problem.
So what should I do if the shower really leaks?
Analyze the factors of the shower leakage first. The main points are as follows:
1. The shower nozzle is blocked. If it is used for a long time, the water output will become smaller. If the water quality is not good, the water contains a lot of alkali, and scale deposits on the water outlet cause the shower to be blocked. At this time, it has to be resolved by the seller of the shower. Therefore, it is very important to choose a reliable seller.
2. Shower plating. Many people have found that the surface paint on the shower can peel off. It will be ugly after the paint is peeled off. If you have just bought a shower that has this problem, it will affect the appearance. In addition, some poor-quality showers will block because of paint falling off. So we have to take a closer look at the surface of the purchased shower for these problems.
When purchasing a shower, you must carefully observe whether the surface of the shower is smooth or not. If it is rough to the touch, it may be processed twice.
3. The material of the shower. Some showers are made of plastic or cast iron. The plastic shower head may contain a lot of waste material, and the service life will not be long. Of course, some hand showers that use plexiglass, ABS and other materials are still very good. However, it is not recommended that you choose the shower head made of cast iron, which is easy to rust. Many people who chose this shower are very regretful, because it didn't take long for it to rust. It's ugly, and it also blocked the water outlet and broke the entire shower. At present, the better material is copper.
After knowing the reason, we can come to a solution. There are mainly the following solutions for leakage in the shower:
1. Leakage at the steering ball of the shower head. First unscrew the shower head from the steering ball ring, find the O-ring or similar seal inside and replace it, and then turn the shower head back. Just go to the original position.
2. Leakage occurs at the joint of the handheld shower. Select the right size shower hose and shower head according to the specifications, replace its rubber ring, and reinstall it.
3. Water leakage caused by gravel or sediment. Unscrew the shower head for cleaning. If necessary, soak the parts with vinegar and scrub the parts. Take care to avoid scratching it. If the shower head is an adjustable spray type, carefully check all movable parts for signs of excessive wear. If the rotating handle cannot move smoothly, the internal cam may be broken, and the entire shower head needs to be replaced.
4. The spray mode from the shower head becomes a mixture of spray and rain mode. If the shower is used for a long time, the water output will decrease. It may be because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet cause the shower to be blocked. It is also very simple to solve. For the shower head designed with silica gel particles, just gently knead it. If the scale is serious, you can put white vinegar in a plastic bag, wrap the shower and soak for some time, then rinse with water.
Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers.
The products include faucets, sinks, basins, bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.
Look forward to cooperating with you.
Thanks a lot!
The sink is the most important part for kitchen decoration. When cooking and washing dishes, 65% of the time is spent dealing with the sink. If you choose the wrong one and want to change, the countertops and cabinets will be changed accordingly, and you will regret it by then.
There are so many sinks, which one to choose without regret?
We summarized the advantages and disadvantages of the sink materials on the market, the experience of using single and double bowls, and the precautions for installation. Let you never make mistakes in the sink when decorating the kitchen.
Which is better for the sink material?
Common sink materials include stone, stainless steel, ceramics, etc.
Artificial Stone:
Advantages: good cleaning, seamless docking, various colors.
Disadvantages: the texture is not as hard as steel.
Many people say that the artificial stone large single bowl sink is easy to use. The capacity is large enough, comes with various drain racks, not afraid of scalding, and will not stain. Simply clean it for 2 minutes a day and it will be shining. If the countertop material is acrylic or quartz, it can be seamlessly connected, and there will be no annoying, moldy silica gel.
Granite:
Advantages: strong, scratch-resistant, wear-resistant, and high-temperature resistant.
Disadvantages: easy to scratch pots, bowls and tableware; need to clean up every day.
Granite is also a kind of stone, and it also has the characteristics of high hardness, wear resistance and high temperature resistance.
However, there are many disadvantages of granite. Because of its high hardness, if you drop porcelain utensils, they will break for sure.
Because it is super abrasion-resistant, to the degree of sharpening the knife, be careful when washing pots with paint on the surface. The sink can scratch the paint!
The stone has the characteristics of easy bleeding, especially when the sink has cracks. The colored liquid can easily penetrate into the stone. Colored liquids like soy sauce or corrosive liquids such as vinegar must not be poured into it, otherwise just wait for the dyeing later. It will cause big trouble in dish washing.
The most important point is that the stone breeds microorganisms at a super fast speed, so you have to wipe it every day like the bathtub!
Stainless Steel:
Advantages: anti-oil, anti-fouling, not afraid of acid and alkali, affordable, strong and flexible.
Disadvantages: prone to scratches and water stains (brushed stainless steel will be better).
Stainless steel has the characteristics of oil and dirt resistance, and because of its low hardness and easy processing, it has a variety of shapes. Many sinks are now integrally formed. A sink is stamped directly from one steel plate, which greatly saves production costs. Stainless steel is suitable for most families.
It is very important to choose a brushed matte surface, which is both dirt-resistant and wear-resistant. Imagine the water stains, handprints, and scratches left by washing dishes and pots after using the shiny polished stainless steel several times. It is simply horrible. The stainless steel sink of good quality has a uniform and fine brushed texture, and it feels very smooth, so that the oil can flow smoothly and will not remain. The inner corner of the sink should be rounded so that it will not hide dirt. To choose stainless steel, you must look for the SUS304 mark, and only the real 304 stainless steel can have quality assurance.
Porcelain:
Advantages: strong, acid and alkali resistant.
Disadvantages: heavier, easy to break, difficult to clean oil stains.
The biggest advantage of the ceramic sink is its good-looking appearance. Ceramic sinks are heavier than stainless steel sinks and lighter than stone sinks. The weight is relatively heavy, and it has an apron front, so installation is very laborious. And one of the most criticized aspects is that ceramics have a kind of adsorption ability for oil. If it is not cleaned for a while, the upper edge will become dirty. And it is also very laborious to clean.
But it's really beautiful.
Single Bowl or Double Bowl ?
Single bowl or double bowl, this is a topic that everyone is arguing about when choosing a sink. After reading the following analysis, you will probably know what suits you.
Single Bowl:
Advantages: easy to put in a large pot.
Disadvantages: ordinary faucet can not clean the entire sink(can be equipped with pull-down faucet); function is not partitioned (can be equipped with mobile sink).
There are so many fans for the big single bowl, because it is big and deep enough that a large wok can be stuffed. With a pull-out faucet, you can clean every corner of the sink.
Large single bowl generally refers to a bowl with a length more than 60cm and a width more than 42cm, otherwise it is a small single bowl.
However, a large single bowl is more suitable for a kitchen with an area larger than 4 square meters, and a small single bowl can only be selected for a kitchen with a small countertop.
Most of the sinks on the market are sold in sets. Many sink sets include accessories and gadgets. Although these accessories and gadgets are gimmicks under the guise of "giving away", they are actually added value of the sink. With them, the function of the sink can be more perfect.
For example, a rectangular colander can hold dishes, vegetables, etc. The drain holes are evenly distributed and can drain water quickly.
Some large single bowl sinks are also equipped with a hidden knife holder, which is more convenient and safe.
Double Bowl:
Advantages: double bowls, double functions.
Disadvantages: A single bowl is relatively small and can't hold large items.
Large double bowls can also hold large pots as long as the volume of the bowl is large enough. Can achieve the function of a large single bowl. The small bowl is used for water filtration, or install a water drying rack to wash fruits and vegetables.
The small double bowl is a bit inferior and can’t hold a wok or the like, but it’s still very convenient to have two bowls. The use of dual bowls saves time and effort and improves efficiency.
The double bowl originally has more functions than the single bowl, because most large double bowls will have accessories such as colanders and drying racks. It can be used in partitions, which is unmatched by a single bowl.
When washing vegetables, pots and pans, you can separate the two to avoid greasy vegetables. It can also be used separately when washing pots and pans alone. One sink for washing and one sink for draining water. And it can also save water.
One bowl for washing fruits and vegetables, and the other for washing dishes.
The length of the double bowl is generally about 80cm. If the length of the counter is longer than 1.2 meters, double bowl can be installed. Many double bowls are designed as one big and one small. If you want to put the wok, the length of the large bowl should be more than 35cm, because the size of the wok is generally between 28cm-34cm. The disadvantage of the double bowl is that the sewer pipe is more complicated, and it is more prone to blockage and water leakage.
Therefore, if you choose a double bowl, it is necessary to buy a good strainer. If the inner wall of the drain is smooth, it is not easy to block. Some double bowls are equipped with threaded drain pipes, or relatively thin drain pipes, which tend to retain oil and cause unpleasant odors.
Above counter sink, under counter sink or one-piece sink?
Above Counter Sink:
All the edges of the sink are exposed on the countertop.
The cleaning of the above counter sink is very inconvenient. Over time, the glass glue on the edge of the sink will easily become moldy and black. The picture below may cause emotional upset, but the reality is always so cruel!
But its benefits are also very obvious, easy to install and cheap. And because edges are over the counter, the bearing capacity is very good. In case it is really disgusting one day and we can't stand it anymore, it can be easily removed as a whole. The space under the above counter sink is about 3 cm higher than the under counter sink. What does this show? It means that there is a large space under the sink for storage!
Under Counter Sink:
One wipe, everything is gone. The under counter sink is lower than the countertop. The water, residues, and vegetable leaves on the countertop will be in the sink with a single wipe. Super convenient. Generally speaking, the under counter sink is quite easy to clean. And it is very beautiful.
However, the installation of the under-counter sink is also more complicated. Not only do you have to prepare more installation costs, you also need to remind the decoration workers. Otherwise, it will generally be installed as an above counter sink.
In addition, once the under counter sink is damaged, it cannot be repaired and needs to be replaced as a whole. If the under-counter sink is used for a long time, the cracks will be moldy, so the mold-proof glue should be used between the under-counter sink and the countertop.
One-piece Sink:
Finally, the one-piece sink. One-piece sink refers to a sink that is an integral part of the countertop. It usually appears in the overall cabinet, and the countertop and the sink are seamlessly connected. The advantage is that there are no gaps, there is no need to worry about mold, and it is really easy to clean up. The disadvantage is that it is very troublesome to replace, which is equivalent to dismantling the entire counter.
In short, whether it is stone, stainless steel, or ceramics, whether it is a single sink or a double sink, it depends on the situation of your own house. As long as you choose the right material, bowl size and quantity, installation style, you can choose the best sink for your home.
Home decoration is troublesome. Apart from other things, it may be very troublesome to choose the toilet. Although all the toilets on the market only have one function, there are many types. Choose from product details when purchasing. Know these 5 tips before buying a toilet.
1. Tips for Buying a Toilet
1) When selecting, you can tap the outer wall of the toilet gently with your finger. If the voice is hoarse, not clear and loud enough, then the toilet is likely to be internally cracked, or the toilet itself is not burned well.
2) The quality of the toilet depends on the quality of its ceramics. A good ceramic surface is uniformly lubricated and has a soft color. Gently touch the surface of the toilet with your hand. The glaze and embryos are delicate, indicating that the toilet is of good quality; for low- and medium-grade toilets, the glaze is rough and the color is dim, and small holes will be found under the light.
3) Pay attention to the return curve and water tank. Choose a glazed one, so that it is not easy to hide dirt and is easy to clean. When selecting, you must reach into the toilet's drain and touch it to see if the interior is smooth. A good toilet manufacturer will not ignore these two details.
4) Choose a toilet that is washable, otherwise you will definitely worry about cleaning the toilet in the future.
5) Test the flushing effect of the toilet pipe. Under normal circumstances, you must first try flushing before buying a toilet. There are some optimized flushing systems that can control the noise decibels below 50 decibels, which is very suitable for families with babies.
2. Precautions for Purchase of Toilet
1) The maximum flushing volume is below 6L.
2) Its own weight is above 40 kg.
3) Requirements for accessories: there is a delay water inlet valve; the water level difference is within 3mm; the water pressure has a wide range of application.
4) The height of the water seal is 55-60mm.
5) It is preferred that the inner side of the S-curve is also glazed on the toilet.
3. Precautions for Purchasing Smart Toilets:
1) It is recommended to select the instant heating method.
2) The impulse type is recommended for the water outlet method.
3) With power-off flushing function.
4) In addition to hot water washing and hot air drying, there are six mandatory functions: constant water temperature, sensor switch cover, night vision lighting, automatic deodorization, seat heating and seat bacteriostasis.
4. Shower
The shower can be divided into multiple product types according to the water outlet method, installation height, style, etc. When purchasing, pay attention to choosing the most suitable one.
How to judge the shower:
When buying a shower, first find out whether the water effect is good. Secondly, look at whether the surface coating is bright and smooth. Then check whether the shower valve core is made of ceramic, smooth and frictionless. Finally, see whether the shower accessories are appropriate and whether the quality meets the requirements.
Precautions for purchase of shower head:
1. It is recommended to choose ceramic valve core for ordinary shower.
2. Copper is recommended for the main body. Choose at least 59-1 copper, with 59% copper and 1% lead. It is recommended to choose CUPC certified showers.
3. It is recommended to choose a shower set with a lifting bracket and a bath faucet.
4. For those who like top spray and large water output, it is recommended to choose a concealed shower system.
5. Most of the items marked with "pressurized shower" achieve the "pressurized" effect by reducing the water outlet, and it is not very comfortable.
5. Bathtub
Before deciding to buy a bathtub, the first thing you need to consider is to choose the size of the bathtub according to the area of the bathroom, and set the height of the water outlet. It is also necessary to consider the particularities of family members, such as children, the elderly, and the disabled. When choosing a bathtub, it is best to choose a lower one, and you can also install handrails in an appropriate position. The bathtub itself should also have anti-slip treatment and so on. Relatively speaking, bathtub selection is more complicated.
Bathtub Purchase Skills
Gloss: understand the pros and cons of the material by looking at the surface gloss;
Smoothness: Check whether the surface of the bathtub is smooth by hand;
Firmness: the firmness can be tested by pressing by hand or stepping on the foot;
Sound: It is best to test the water to listen to the sound before buying. Don't choose a bathtub with too much noise.
Precautions for Purchase of Bathtubs:
1) The bathtub area is not very big. It only needs 1.2 square meters to install a standard bathtub.
2) The one-piece bathtub without separation is more practical.
3) It is better to have a hair filter in the water.
4) When choosing a bathtub with massage, bubble or mixed functions, you must try it first, and then choose the one that suits you.
5) Before the completion of the installation, the water storage and discharge experiment must be done under the standard water pressure, and both cold and hot water must be done.
6. Shower Room
Precautions for purchase of shower room:
1) It is recommended to choose anti-fingerprint treated stainless steel for the frame material.
2) It is recommended to choose a sliding door for the shower door. It has advantages over flat doors in terms of space occupation, convenience, and safety.
3) The recommended thickness of tempered glass is 8mm, and the minimum is no less than 6mm.
4) The quality of tempered glass is critical. Need to know about glass manufacturers and choose factories with CCC certification.
7. Bathroom Cabinet
Bathroom cabinets mainly include solid wood bathroom cabinets, ceramic bathroom cabinets, PVC bathroom cabinets, and acrylic bathroom cabinets. The solid wood bathroom cabinet is made of dehydrated solid wood as the base material. It has an exquisite appearance, high grade and good waterproof performance. However, solid wood bathroom cabinets are bulky and prone to cracking and require good maintenance.
Ceramic bathroom cabinets are relatively clean in appearance and easy to take care of, but they are easily damaged. The appearance of PVC bathroom cabinet is more shiny, and the cabinet is lighter, and the waterproof performance is the best. However, PVC bathroom cabinets are easily deformed when subjected to a collision. Acrylic bathroom cabinets are similar to PVC bathroom cabinets, but are more brittle than PVC cabinets, and are prone to scratches and cracks.
Bathroom cabinet selection method:
1) Check whether the bathroom cabinet is damaged, cracked or deformed.
2) Check whether the glazed surface of the bathroom cabinet is flat and whether the surface is cracked.
3) Check whether the various parts of the bathroom cabinet are tightly connected and whether it is used smoothly.
4) Look at the anti-fouling ability of the bathroom cabinet, which can be tested by scribbling and erasing.
Precautions for bathroom cabinet installation:
1) If you have not done in-wall inlet and outlet pipe renovation, it is recommended to choose floor-standing solid wood cabinets.
2) It is recommended that bathroom cabinets with a width of 1.4 meters and above adopt the design of double basins.
3) If the feet of the bathroom cabinet are made of wood, it is recommended to use a thin rubber pad to separate them from the floor.
When installing, there should be a 1cm gap between the bathroom cabinet and the wall to prevent the back panel from contacting the wet wall for a long time to cause get mouldy.
In daily life, the planning of the bathroom is very important. A space of a few square meters has to bear a lot of sanitary ware and electrical appliances, such as toilets, bathtubs, washing machines, clothes dryers, etc. These are essential equipment that can improve the comfort and convenience of life.
The three-square-meter bathroom is also the size of most apartment bathrooms. The space is not large, but it does not affect people's pursuit of quality life. How to make good use of small space and achieve the aim of practical and beautiful appearance ? There are many ways.
01 Extend the sink counter to the washing machine and get an extra storage table.
If the area of the sink counter is relatively wide, you might as well design the washing machine and sink counter as a whole. By the way, the upper part of the washing machine is also designed as a countertop, which has an extra space for display. The whole area be neat and decent.
A large sink is exactly what women need. They have too many skin care products and cosmetics to be placed.
Suitable for: single women, or small families.
Advantages: The upper part of the washing machine is fully utilized and many things can be placed.
Of course, if you want to pay attention to some design sense, you can design the washing machine and the sink in a staggered layer, showing a patchwork of beauty, and it can also bring a unique atmosphere to a small space.
02 The washing machine and the storage cabinet coexist harmoniously, and one thing is multi-purpose and takes up less space.
If there are many things in the house, consider using more storage cabinets in the bathroom. But in a small space of three square meters, how should the washing machine be placed?
The washing machine, storage cabinet, and sink can be designed as a whole, and the three can use each other to realize their own value, visually beautiful, form a multi-purpose, and occupy a small area.
Suitable: Families with lots of things.
Advantages: One thing is multi-purpose, and it occupies a small area.
03 Maximize the use of corner space
There is always an unexpected room type of an apartment, such as a three-square-meter rectangle, but it happens to be faced with the problem of a lot of things and a lot of demand. The washing machine and the cabinet need to be put in the bathroom. How to achieve it ?
Three walls can be used. The storage cabinets, sinks, and washing machines leaning against the wall can perfectly maximize the use of corner space.
Suitable for: families who have many things and pay attention to space design.
Advantages: The smallest space is used to the maximum.
04 Storage rack: Use the height of space to realize vertical storage.
Different room types and different residents have different requirements for the placement of washing machines. Some people like simple display. Easy to take things, and easy to move the washing machine. In fact, a storage rack can solve all the troubles. The storage rack is light and convenient, and there is no construction problem. You only need to place it in a suitable position, put daily necessities on it, and put a washing machine underneath it to achieve a perfect plan for a small space. This is also a way to achieve vertical storage, which saves more space.
Suitable for: Singles with less things and high requirements for the convenience of life.
Advantages: easy to move, easy to clean, and less costly for decoration.
It is not difficult to stuff a washing machine in a three-square-meter bathroom. The key is to design in combination with different room types. In addition, the living needs and actual conditions of different residents must be considered to create a comfortable and practical bathroom space.
Aquacubic Has Rich Experience and Passion in Bath and Kitchen Industry. We can provide total solution for apartment projects.
Guangdong sanitary ware production area: all kinds of sanitary products.
Guangdong's production areas are mainly concentrated in Foshan, Kaiping, Zhongshan, Chaozhou. It is the region with the most complete domestic bathroom industry chain, the most enterprises, and the most well-known brands. Guangdong sanitary ware production area includes all kinds of sanitary products, including ceramic sanitary ware, hard sanitary ware, etc. At present, no production area can compare with Guangdong in terms of industrial intensification. Aquacubic’s two production sites are located in Foshan, Guangdong.
Tangshan sanitary ware production area: mainly ceramic sanitary ware.
Tangshan ceramics has a long history. It is the main ceramic producing area in China. At present, Tangshan has been recognized as "Hebei Province Ceramic Products (Tangshan) Export Base", "China Building Material Export Base" and "National Foreign Trade Transformation and Upgrade Professional Demonstration Base".
Nan'an sanitary ware production area: mainly hardware plumbing.
Nan'an, the hometown of water heating in China, is centered on Luncang Town, the "Hometown of Water Heating in China", and Yingdu Town, "China's Water Heating Valve Base Town". Nan'an people's supply and marketing forces spread all over the country, occupying more than 70% of the country's plumbing valve market sales.
Zhejiang sanitary ware production area: mainly hard sanitary ware.
At present, Zhejiang sanitary ware industry has formed economic development sectors such as Hangzhou leisure sanitary ware base, Jiaxing Pinghu sanitary ware base, Wenzhou plumbing equipment production base, Taizhou sanitary ware base, Ningbo plumbing equipment and sanitary fittings production base.
Changge sanitary ware production area: mainly ceramic sanitary ware.
In November 2009, the China Building and Sanitary Ceramics Association officially awarded Changge City the title of "Central China Sanitary Ware Industry Base", marking the first national sanitary ware industry base to settle in Changge, Henan.
Chinese manufacturers have mastered the design, research and development, production, sales and service of sanitary products, opening up the entire industrial chain. As China enters the era of quality, more and more consumers are willing to pay for quality, and the quality of products in the sanitary ware market will be even more improved.
Pink is considered the exclusive color of girls, and many people can't resist its unique tenderness and romance.
Pink is soft and compatible. It is a very versatile color. When used properly, it can add a unique texture to the space. It now occupies a very special place in home design.
For the pink bathroom space, how can it be decorated to be unconventional?
Combine Pink and Tiles
Worried that too much pink will look tacky? Then add the tile. The large pink walls are matched with tiles of different textures to make the bathroom richer, playful and unique.
Choose bright chrome bathroom accessories in the space to completely blend into the pink space. Towel bar, towel ring, storage basket, soap dish... a full set of configuration. Make the bathroom tidy and clean.
Pink Matches with Other Colors.
Pink is a very tolerant color. Green, which seems difficult to match, is combined with pink. A warm and cold mixed hue makes the space more fresh without any uncomfortable impact.
The sweet pink is matched with the black metal bathroom accessories. The calm black effectively neutralizes the sweetness of the large pink.
The black bathroom accessories with a strong sense of line give the space a sense of high quality.
Embellish the bathroom with pink, soft and not monotonous, elegant and vigorous. Let the space bloom with a different kind of charm.
Aquacubic Solid Brass Matt Black Concealed Overhead Rain Shower Faucet with Hand Shower.
Waterfall shower head uses air pressure technology and can provide stable and powerful showers even at low water pressure.
Manufactured from premium material with outstanding corrosion resistant performance for ensuring high quality and better durability.
Some faucets are used two or three years, and the water flow is intermittent or rusted into green. The handle is hard to be used for opening and closing. The size of the water flow depends on luck.
Some faucets have been used for 20 years, and the surface is still as smooth as new. The feel when adjusting the angle of the handle is still as silky as the chopsticks in a honey jar. The speed of the water flow are still adjusted as you like. So how can we pick a faucet that can last 20 or 30 years or more?
First, the kitchen faucet can be rotated 360°.
For ease of use, the kitchen faucet should be taller, and the spout should also be very long. It is best to extend above the drain and not splash water. If there is a hot water line in the kitchen, this type of faucet should also contain hot and cold hoses. In order to meet various needs, most of the kitchen faucets can rotate the body of the faucet left and right. The sprayer part of some faucet can be pulled out, which is convenient for cleaning to all corners of the sink.
Second, if the budget is enough, the material of stainless steel is preferred.
The material of kitchen faucet is generally brass, which is the most common faucet on the market. However. Due to the characteristics of the kitchen environment, pure brass faucets are not necessarily the best choice. All pure brass faucets have electroplating on the outermost layer, and the function of electroplating is to prevent corrosion and rust of the brass inside. There is a lot of oily smoke in the kitchen, and the greasy hands and cleaners on the hands when washing the dishes make it often necessary to clean the faucet. If you do not use the correct way to clean, it is likely to damage the electroplating layer of the faucet, causing the faucet to be corroded and rusted. If you want to choose an all-brass kitchen faucet, you must be sure to have excellent electroplating, otherwise it will easily cause the faucet to rust and corrode.
And now some manufacturers use high-quality 304 stainless steel to make faucets. Compared with pure brass faucets, faucets made of high-quality stainless steel are free of lead, acid, alkali, corrosion, and harmful substances, and will not pollute tap water. This is very important for drinking water in the kitchen; and the stainless steel faucet does not need electroplating, it is extremely difficult to rust, and the hardness and toughness are more than twice higher than that of brass products, so it is very convenient to clean. However, due to the high difficulty of stainless steel processing, the current high-quality stainless steel faucets are usually relatively expensive.
Third, pay attention to whether the length of the tap can clean the sinks on both sides.
When buying, pay attention to the length of the basin and the faucet sprayer. If it is a double sink, pay attention to whether the length of the faucet can clean the sinks on both sides when rotating. Most kitchen faucets can rotate the body of the faucet left and right, which is convenient for cleaning to all corners of the sink.
In 2021 the U.S. kitchen and bathroom market is expected to reach $158.6 billion.
The United States is the world's largest importer of kitchen and bathroom products. For exporters of kitchen and bathroom products, the US market is very important. In January 2021, the National Kitchen and Bath Association (NKBA) released the "2021 Market Outlook Report". The report shows that the U.S. kitchen and bathroom industry will continue to grow, and the overall expenditure on kitchen and bathroom projects will increase in the coming year.
The industry predicts that after the overall decline of 5.9% in the U.S. kitchen and bathroom industry in 2020, it will reach 158.6 billion U.S. dollars in 2021, an increase of 16.6%, and an increase of 9% in 2018 and 1% in 2019. At the same time, it is expected that the growth of new houses will exceed 22%, while the renovation project will increase by 10%. High-end and mid-range projects are expected to lead, both of which are expected to increase by 20% than last year.
U. S. homeowners believe that the kitchen and bathroom area are twice as important as other spaces in the house. During the COVID-19 pandemic, the role of the kitchen is particularly prominent. 70% of homeowners believe that the kitchen is extremely important, compared to the previous proportion 64%.
With people's renewed attention to these family areas, the industry expects that large-scale interior renovation projects, including kitchen renovations, will usher in a new round of changes. This year may see a shift from the DIY in 2020 to the need for professional installers for kitchens and bathrooms. Many of these projects were delayed during the pandemic due to the risk of installation personnel carrying virus.
The report pointed out some motivations and inspirations to continue to promote the renovation project:
Although large-scale and more professional projects are planned to increase this year, saving money (attention 25%), project execution in leisure time (attention 23%), and health and safety issues (22%) are the main reasons for the increase in DIY.
Residents said that improving the aesthetics of the house was the main motivation for renovating the bathroom (16%) and kitchen (15%), followed by maximizing the quality and durability, and increasing the value of the house.
Houseowners pursuing cost-effectiveness and maximizing the use of existing budgets focus on renewing cabinets (52% of projects), plumbing (43% of projects), smart home products (57% of projects), and water purification systems (54% of projects) .
Family income and family member structure both affect the cost of kitchen renovation. "Mature families", that is, families with members over 45 years old and no children, have the highest percentage of upgrades to advanced functions in the kitchen.
Google search and social media are the main sources of inspiration for kitchen and bathroom renovations. Most owners stated that they rely on more than one source for inspiration. Young single homeowners or couples tend to rely more on Google and Instagram, while adults over 45 prefer to know what the other families did.
Economic factors that may affect renovation activities include:
1. A 10% increase in the operating rate of single-family housing in 2020 will drive a 17% increase in new residential building materials in 2021.
2. Of the total expenditure on residential kitchens and bathrooms, new houses accounted for 57%, reaching US$90 billion; residential renovations accounted for 43%, reaching US$68.6 billion.
3. Mortgage interest rates, which are about 1% lower than 2020, will continue to drive the home buying boom.
4. As the US houses for sale hit a record low, the price of stock houses will usher in price increase, which will indirectly promote house renovation rather than purchase of new houses.
5. The research report predicts that, driven by supply shortage and potential demand, total house prices will appreciate by about 31% between 2020 and 2023.