











The bathroom is full of water vapor after taking a shower? The bath water splashes on the ground? Sometimes you slip and fall accidentally? The bathroom without separation of wet and dry is simply maddening. The separation of wet and dry is an unavoidable matter in the bathroom. As long as we have a slight requirement for the quality of the bathroom, we will immediately take care of this matter. Because the separation of wet and dry in the bathroom is a very cost-effective job, it will make your bathroom life full of happiness in minutes. How to achieve the separation of dry and wet in the bathroom? For small-sized bathrooms, the partitions are too narrow, and they cannot be separated from wet and dry. Very tangled. So how to separate wet and dry in a bathroom of only about 5 square meters? Let's analyze how to separate wet and dry in a small bathroom!
Separated by Shower Curtain
The shower curtain is the simplest and most beautiful way to separate wet and dry in the bathroom. It can be said to be a must-have artifact for the bathtub. Use a shower curtain to separate the dry and wet areas of a small apartment, which is the most trouble-free and cost-effective. Whether it is an arc-shaped corner, or directly draw a straight line, make a water retaining strip and hang a shower curtain. It is very convenient. You can also frequently change the style of the shower curtain to a different style. But the disadvantage is that it cannot effectively block water vapor, and it is easy to grow mold and needs to be cleaned frequently.
Glass Partition
Compared with the shower curtain which can not effectively isolate the water vapor, the shower door is much more practical. More suitable for bathrooms equipped with showers. The shower door is mostly made of glass. Glass partition is a better choice. On the one hand, because the glass is transparent, it does not appear to be visually narrow. Second, because the glass has better water resistance, the effect of wet and dry partitions will be better.
Half Wall Partition
For small apartments, this is also a good choice. Not only can it perfectly achieve the purpose of separating dry and wet, but also use the half wall to create its own style. Pasting retro-style or modern-style tiles on the wall can play a decorative and beautifying role.
The water pipe under the sink does not contact the floor.
In addition to working on the door, you can also separate wet and dry in places such as sinks and basins. The important point is to not to touch the floor! Bathroom furniture that is not exposed to water stains is less likely to be corroded, which increases the service life and is also easy to clean.
Move the Sink Out
The most complete wet and dry separation is to move the sink directly outside the door. Use part of the outside space to make the shower area inside the bathroom more spacious. In addition, the external washbasin also allows a family to wash without interfering with each other. The vanity and sink are placed outside the bathroom. Completely cut off the moisture in the bath. Small apartments can also use the walkway outside the bathroom to do so!
Do you like the bathroom with separate dry and wet function? The dry area and wet area of the bathroom are perfectly separated, which not only partitions the space, but also is visually more fashionable and rich in spatial level. Wet and dry separation has gradually become mainstream in bathroom design, so hurry up and give it a try!
Ideal life starts here.
Home, as a refueling station for happiness, is not just a place to rest, but a pleasant space that carries our stories and emotions. So it must be comfortable enough to be lazily for a whole day; it must be sunny enough to bloom every day's good mood; it must be warm enough to speed up our pace of going home.
The ideal life can start from creating a comfortable bathroom. The comfort of the bathroom space is related to the quality of life and the pleasant mood of the day. If the decoration is not good, how to start a happy life?
The morning starts from washing in the bathroom, ushering in a good time of the day; the relaxing moment when you go home after a day of work, and the hearty bathing, will restore your vitality to yourself.
This article introduces the three main components of the faucet. It will help you to understand the quality and material of faucets we use everyday. Uncover all the mysteries of the faucet.
Part 1: Composition
The three most basic components of a faucet: main body, plating and cartridge.
01 Main Body
The main body is the torso part of the faucet. The water flows in and out of the main body all the time. So the material is important. It determines the water quality.
Copper Alloy Faucet
Copper alloy is currently recognized as the most suitable main material for home use faucet, and the mainstream is brass. On the one hand, copper has good machinability, fluidity and formability. On the other hand, because copper ions have a bactericidal effect, they can kill super bacteria such as MRSA within 30 minutes and prevent the bacteria from producing antibodies. The inner wall of the copper faucet will not breed bacteria and become the most suitable carrier for "water".
According to different proportions of copper content in copper alloys, copper alloy materials can be divided into 52, 55, 59 and 62 copper. Among them, 59 copper is the best. The content of copper metal is 58%-60%, the content of lead metal is 0.08%-0.2%, and the content of other elements is about 2%. The remaining metal is basically zinc.
Because lead metal will precipitate when water enters the faucet, it will pollute the water. If the lead content is too high, it is harmful to the human body. Therefore, some brand faucets use low-lead copper, that is, the lead content is less than 0.1%. In view of the fact that it is difficult for general consumers to judge the lead content, it is recommended to choose a faucet with a clear mark that uses low-lead copper.
Zinc Alloy Faucet
Zinc alloy is an alloy based on zinc and added with other elements such as aluminum, copper, magnesium, cadmium, lead, and titanium. Zinc alloy is easily corroded in water. After being corroded, the metal will be mixed into the water and cause harm to the human body. The biggest advantage is probably the low price.
Stainless Steel Faucet
The main components of steel are iron and carbon. Ordinary carbon steel is easy to rust. Adding chromium, nickel and other metals to carbon steel can make the steel corrosion resistant. Therefore, the most important factor affecting the corrosion resistance of stainless steel is the content of chromium.
Stainless steel has the advantages of acid resistance, alkali resistance, corrosion resistance, and no release of harmful substances (lead). But compared with copper, it has one of the biggest drawbacks, that is, it does not have antibacterial function.
Brief Summary
If the budget is sufficient, choose low-lead copper faucets. If you can't identify whether it is low-lead copper, choose a product from a big brand.
If you have a small budget, you can choose stainless steel faucets. The price will be cheaper. However, relatively there will be some problems. In particular, we must choose products from high standard manufacturers. After all, it's about your own health, don't be greedy for cheap.
02 Plating
The faucet is used in a humid environment, and its surface requires a good finish. The common surface treatment method on the market is electroplating, mainly including chrome plating, nickel plating, titanium plating and so on. In addition, there are some rarer methods such as baking varnish, porcelain, and imitation gold electrophoretic paint.
Chrome
Chrome plating is the most common faucet plating. Chromium is a white metal with a bluish color, which has high hardness and wear resistance. Its hardness exceeds even the hardest quenched steel, second only to diamond.
Chromium is not easy to change in a humid environment and can maintain the surface gloss for a long time. With a silver appearance, chrome-plated faucets are more popular with consumers.
Nickel
Nickel can quickly form a very thin passivation film on the surface of the faucet. Can resist the corrosion of water vapor and certain acids. Has excellent corrosion resistance and stability. Can resist the corrosion of water vapor and certain acids. Therefore, the stability of the nickel layer in a humid environment is very high.
Titanium Alloy
Titanium alloys are made by adding aluminum and tin elements or aluminum and vanadium elements to titanium. Electroplated titanium gold has the advantages of high strength, low density, strong toughness and good corrosion resistance. The surface of the titanium-plated faucet is as smooth as a mirror. Its golden luster looks elegant and rich, and very decorative. However, the process of plating titanium gold is complicated. It is very easy to absorb impurities during thermal processing. Therefore, the yield is low. The cost is also higher.
Baking Varnish
Baking varnish is to put two layers of coating on the faucet. Each time the paint is applied, it is sent to a dust-free constant temperature baking paint room for electric heating or far-infrared high temperature baking.
The surface of the baking varnish faucet is smooth and shiny, which can present a visual texture similar to that of a piano, making the whole product look very high-grade. However, compared with other surface treatment methods, baking varnish faucets are more prone to surface peeling. The durability is not as good as the traditional chrome-plated faucet. This method is not widely used.
Brushed
This treatment will make the surface of the faucet visually rough. However, it is quite delicate to the touch, showing a restrained beauty. The brushed process mainly relies on mechanical friction to produce several common textures such as straight lines, chaotic lines, threads, corrugations, swirling lines and intermittent silk lines on the surface of the faucet. It can also create matte, mirror, three-dimensional, embossed, satin and other effects.
Brief Summary
Appropriate surface treatment can make the overall shape of the faucet rich and full. Choosing the right faucet can also become the finishing touch to the bathroom decoration. It is pleasing to the eye.
There are generally multiple layers of plating. There are also some cheap faucets that are only coated one layer. The coating is not as thick as possible, but just right. If the coating is too thin, it will not be able to prevent corrosion. If the coating is too thick, it is easy to peel off. Copper + nickel + chromium is best. Copper can provide excellent adhesion. Nickel makes the coating have excellent corrosion resistance. Chromium makes the surface bright and flawless, and it is hard and scratch-resistant. Further improving the corrosion resistance. In addition, the faucet that has passed the 48-hour professional salt spray test will be more guaranteed in terms of corrosion resistance. Aquacubic's products have passed these tests.
03 Cartridge
The cartridge is a part that realizes the basic functions of direction control, pressure control or flow control by means of the rotation of the valve stem. The water flow enters the main body of the faucet through the cartridge and finally leaves the water outlet. The faucet used at home is turned on and off countless times a day. It can be seen that the quality of the cartridge is also very important to the faucet.
Ceramic Cartridge
The ceramic cartridge has less water pollution, good wear resistance and good sealing performance. Many high-quality faucets use ceramic cartridges. The ceramic chip must have good airtightness, stable physical properties, wear resistance, and long service life.
Stainless Steel Cartridge
The biggest advantage of the stainless steel cartridge is that it has a larger adjustable angle of rotation and is not easily affected by water quality. It is more practical to choose this type in areas with poor water quality. However, stainless steel has worse wear resistance compared to ceramic. After it is used for a long time, water leakage is prone to occur.
Roller Cartridge
Roller cartridges are old-fashioned cartridges. No matter in terms of price, water pollution or life span, they are inferior to ceramics and have been phased out. There are very few roller cartridge faucets on the market.
Part 2: How to Buy ?
After understanding the most important parts of the faucet, let's take a look at the precautions when purchasing.
01 The Weight
Faucets made of brass are heavier. So you can make a preliminary judgment by weighing the faucet. However, many manufacturers can increase the weight of low-quality faucets through some methods. So here is a commonplace saying, for consumers who can't distinguish the material, it is better to choose the leading brands. This is the simplest selection method.
02 The Surface
In sufficient light, carefully observe the electroplated surface of the faucet. Good electroplating looks as bright as a mirror, without any oxidation spots and burn marks, no pores, no blistering, no plating leakage, no burrs to the touch. After pressing the faucet, the fingerprints will spread out quickly, and it is not easy to adhere to dirt.
Breathing out the surface of the faucet. For products with good electroplating quality, the water vapor will quickly and evenly fade away. If the quality is not good, the fading speed will be slower, or not fade. The faster and more even the water vapor fades, the better the quality.
03 After-sales Service
The after-sales service of the product is very important, and it is also the guarantee for you to have no worries. Be sure to buy products with good after-sales service. The general faucet is guaranteed for at least 5 years.
When choosing a faucet, the most important thing is to look at the material, plating and cartridge of the faucet. Because the material determines the safety of the water. The coating can increase the service life of the faucet, so that the faucet has scratch resistance, corrosion resistance, and the surface brightness will be better. The cartridge is the heart of the faucet. Generally high quality faucets use ceramic cartridges. It has the characteristics of strong wear resistance and good sealing performance.
Ceramic sink is a kind of household goods. There are many kinds of sink materials, such as cast iron enamel, ceramics,
steel plate enamel, artificial stone, acrylic, crystal stone flume, etc. Most bathroom sinks are made from firecaly.
Ceramic sink is a kind of water sink which is made by integrated molding and firing. Its main body is mainly white.
It has the advantages of high temperature resistance, easy cleaning and aging resistance.
It can be wiped clean with cloth or clean metal ball in daily cleaning.
Step Ⅰ. Grouting
The production of ceramic sink is generally made by grouting.
The slurry is poured into a fixed die and allowed to solidify.
Step Ⅱ. Spraying Glaze
It is necessary to prepare qualified glaze slurry. Spray it on the surface of sink body.
Vitrify it into porcelain after firing; cover it on the surface.
Step Ⅲ. Forming
Forming is a drying process.
The process of further dehydration of semi-finished products.
Step Ⅳ. Preparation for Furnace
This is an important step before burning.
Workers need to check the surface & quality of the sinks and lay them together in trolley.
Step Ⅴ. Burning
Put the products on the kiln car according to certain proportion.
Based on the given temperature curve, sink will form finally.
Step Ⅵ. Storage & Logistic
With the development of storage & logistics industry,
we developed a complete solution for big size cargos.
Buying a new bathroom sink faucet can be a challenging task. You have to consider many factors, such as installation, types, and finishes.
Also, a wide variety of brands and faucets are available. The bathroom sink is a vital fixture, so selecting the correct faucet is essential.
Here are the steps for how to choose a faucet for your bathroom sink.
3 Tips on Choosing a Faucet
1. Installation
If you want to switch from two handles to one, you have to think about the number of holes in the sink.
Most sinks have three holes: one for the hot handle, one for the cold and one under the spout.
Some single-handle faucets include a cover plate to hide the extra holes. But some don't, so check the label.
If you currently have a “wide spread” bathroom faucet with two handles far from the spout,
you can’t switch to a single-handle model.
2. Faucet Types
Ⅰ. Single-hole faucets combine the spout and mixing handles—often a single lever—into one unit that requires only one drilled sink hole.
For retrofits, some models include a bottom plate that will cover existing three-hole openings. Single-hole faucets are ideal for smaller sinks,
such as powder room baths. Their simplicity reflects modern sensibilities.
Ⅱ. Center-set faucets fit standard three-hole sinks (with outer holes drilled 4 inches apart). They'll have either a single lever or
two handles mounted on a 6-inch plate. They're ideal for most bathroom sinks.
Ⅲ. Widespread mounts have three separate pieces: Two handles and the spout.
The standard distance between the handles is at least 8 inches, and the three pieces tend to be larger than other types of bath faucets.
Smaller versions, called minispreads, are designed for standard holes drilled 4 inches apart.
Ⅵ. Wall mount faucets have gained popularity along with freestanding or vessel-type sinks that require longer spouts
that extend well over the top of the bowl. Not every faucet fixture can be easily categorized. Kohler, for example,
makes a faucet that's integrated into a mirrored wall cabinet.
All you see is the tiny flow control lever peeking out from the bottom of your mirrored self.
3. Faucet Finishes
Choose a finish that matches nearby cabinet hardware, towel bars, etc. Mismatches look bad. If you plan to replace existing hardware,
your choice of faucet finishes is wide open. The vast majority of faucets have polished chrome, satin nickel or bronze finishes.
All of these finishes are durable and keep their good looks for years. But some are more durable than others.
Chrome is the most durable finish and the easiest to keep clean-that's why it's always been the favorite
for commercial kitchens and public bathrooms. If your faucet gets heavy use, it's your best bet for long-term toughness.
Nickel finishes are usually labeled “brushed,” “satin” or “stainless steel” and have a dull shine.
They're durable but prone to fingerprints and water spots, so they're harder to keep clean.
Some have a coating that reduces stains and smudges, but that coating isn't as durable as metal and may chip or wear.
Bronze faucets have a brownish tone and are often called “oiled” or “rubbed” bronze.
But the surface is a coating (such as epoxy) rather than metal.
This coating is tough stuff, but can be chipped or scratched more easily than metal.
ALWEN Dual handle bathroom faucet, a luxury modern contemporary three hole bathroom vanity sink lavatory faucet. Brushed nickel/Chrome finish. UPC, cUPC, NSF certified, lead free bathroom faucet.
Description
This bathroom faucet comes in a beautiful polished chrome finish and is practical and stylish. Its center set design with handles will keep your bathroom simple, modern, and keeping space tight and easy to clean.
Features:
Solid Brass construction to resist rust, corrosion, and tarnish
Swiss NEOPERL Aerator ensures perfect water flow and environment friendly.
High Arc faucet spout ensures enough space for washing hands and clean.
Aquacubic provides "Quality Bath & Kitchen Solution" to our customers.
Quality is always the first priority of Aquacubic. We understand the importance of quality to our clients, and quality is the foundation for long -term cooperation. To deliver high quality products, we established the whole quality system from raw materials checking to mass production audit and final products inspection. Most of our products are CE and CUPC certified.
Cooperating with Aquacubic is cost saving. Aquacubic make great investment in machines to increase production efficiency. Thanks to long existence in the industry and good relationship with material suppliers, Aquacubic has good cost control system and bargain power, to ensure competitive pricing for our customers. Once you contact with Aquacubic, you will find yourself are in service of a hardworking, reliable, sincere team with good communication skills. Our associates also provide value-added service for design, test report, shipment arranging, freight cost control and so on.
Aquacubic has rich experience and passion in bath and kitchen industry and appreciate for your contacting and business.
Many people want to have a bathtub in their homes. But it may be because of too small space, living habits or budget, and they choose to give up. The bathroom is worth planning. Today, we will introduce how people who don’t have a bathtub at home have arranged their own bathrooms.
1. All White Bathroom
Decorate the bathroom in all white. In this clean and concise space, everything is a pleasure. A little dirt will be found, and it can be cleaned and removed immediately. People who like white usually also like to tidy up the room.
However, when the bathroom is completely white, and even the bath towel and bathroom bottles are pure white, it is more obvious whether the color of the caulk, bathroom hardware, and electroplating are uniform.
Some bathrooms will have a combination of tiles and paint. People who pursue all whiteness should pay attention to whether there is a color difference between the paint and the tiles.
White marble covers the room, and with black hardware, the style immediately rises.
The glass partition does simple dry and wet separation, which does not affect the overall natural lighting.
2. Grey Bathroom
Those who find it troublesome to clean the bathroom can consider gray as the main color of the bathroom. Compared to the white tiles, the dirt looks less obvious on the dark gray. The entire cleaning can be completed in 5 minutes.
This bathroom uses different tiles, low-key but full of changes. Of course, the most eye-catching among them is the hexagonal tile.
Bronze-colored hardware has always created a nostalgic circumstance.
Some people use cement powder to decorate the bathroom, but the cement powder is prone to cracking and sanding. It is not recommended to use it in the bathroom, especially the shower area.
3. Wood Grain Bathroom
Whether it is Japanese, country, modern, classical and other themes, you can see the use of wood grain. If you want to step into a healing bathroom after work, wood grain is a great choice.
Because most bathrooms are not suitable for solid wood due to poor ventilation, wood-grain tiles are better.
Due to the different regional climate and bathroom ventilation conditions, many foreign wood that can be placed in the bathroom is not suitable for moving to China.
If the overall bathroom is white, it is also very eye-catching to use a set of wood-grained vanity cabinets.
Thanks for viewing our website. Hopefully you can find your interested items.
Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business.
Speaking of bathroom, the first thing many people think of is that we must separate wet and dry functions. After all, the traditional integrated type is too inconvenient to use. The bathroom is always wet, and even the towels have a musty smell. With the improvement of people's living standards, more and more people hope that the bathroom can be truly hygienic.
Three-way separation, that is, the basin area, shower area and toilet area are completely separated.
Advantages of three-way separation:
First, each washing area is an independent space, ensuring privacy while isolating smell and humidity;
Second, improve safety, especially for families with the elderly and children, and reduce the possibility of slipping due to water in the bathroom;
Third, ensure the cleanliness of the bathroom, and extend the service life.
How to create a three-way separation for a 3 square meter bathroom?
Square Layout
As soon as you enter the room, it is the washing area, which is the most frequently used area in the entire bathroom, so placing it at the door does not affect the use of other areas.
The middle position is the toilet area. The small toilet is separated by a baffle to form an independent space. If you feel that it is not private enough, you can install a small shower curtain to completely separate the toilet area. This is generally not recommended. After all, it affects the appearance, and it also gives people the feeling of being cramped.
The square space uses all the walls. A few niches or horizontal partitions are placed on one end of the bathtub to hold bath towels and clothes. The bath area is designed in the innermost part, the edge of the bathtub itself is an isolation belt, and the shower head is installed on the wall at the other end of the bathtub, which is convenient and does not take up space.
Although the square space is not very easy to handle, it can be regarded as "excellent brushwork" through this elaborate design.
Rectangular Layout
Compared with a square bathroom, a rectangular space will make the best use of everything.
The same is the wash area next to the door. The difference is that the rectangular space also has a place to put the washing machine. When you take a shower, you can throw your clothes into the washing machine.
Placing the toilet and shower in parallel on the innermost side and covering the tub with a shower curtain.
The above are two designs of 3 square meters bathroom. Of course, there are more design styles, such as a sliding folding door instead of a shower curtain.
This folding door design not only saves space, but also has good privacy. Very practical.
With some simple lighting, the bathroom can also be a beautiful scenery.
The barn door design completely separates the bathroom area.
Bathtub
A small bathroom doesn't necessarily need a bathtub. But if removing the wall partition and replace it with a shower curtain, there will be bathtub area.
Shower Room
The shower room can be placed in the triangular area at the corner of the bathroom to form a fan-shaped area, which is the most space-saving.
Toilet
It is best to use a small size. After all, if the toilet is too big, it doesn't seem to be of much use except for taking up space.
What are the precautions for the three-way separation?
Color Tone
Because the space is relatively small, the tones of the floor tiles and the walls should be matched reasonably. It is best to focus on warm colors, which are swelling colors. They have the effect of "expanding" the space.
Mirror
Try to choose a mirror as large as possible. The role of a large mirror is the same as the color tone, which increases the sense of space.
Storage
The corners must not be wasted. Simple wooden shelves and niches are good storage methods.
Ventilation
The last thing we must pay attention to is ventilation. It is important to reduce odors.