Garbage Disposal Flange- China Suppliers Manufacturers Factory

In addition to the practicality of the apartment renovation, we also pay attention to its beauty. For example, choose wall-mounted toilets and washbasins; choose concealed baseboards; hide all the pipes; improve the overall aesthetics!

 

Concealed showers are more beautiful than exposed showers.

 

There are mainly the following 3 ways to install the shower:

1) Exposed installation: the water inlet pipe and mixing valve of the shower are exposed outside, which is not beautiful enough;

2) Concealed pipe installation: The inlet pipe is buried in the wall and the mixing valve is outside. This is most commonly used method;

3) Concealed installation: Completely opposite to the first type, the inlet pipe and the return valve are installed inside the wall. Leaving only the switch and the water outlet outside. Although it is beautiful, the process is complicated.

 

For concealed showers, there are also two different styles:

1) Top sprayer and hand shower

Look at the picture, the top shower head is matched with a hand-held shower head at the bottom. In this way, you need to determine the size of the shower head before renovation. And do the drilling and wiring layout. In terms of installation, this method is relatively simple.

 

2) With additional side spray

This is based on the former, plus a side spray function. During renovation, pre-installed in-wall boxes and multiple valve cores are required to match the water outlet. You can imagine how complicated this approach is! How to install it? Look down.

 

First determine the number of side nozzles (usually 2-6); the in-wall installed valve core has multiple outlet connection ports, from the valve core to the main water inlet, other outlets, top spray showers and hand showers; Secondly, cement leveling is required between the valve core and the wall, and in-wall installed parts are also used to stabilize; then leveling, waterproofing and pressing are performed to see if there is any leakage; the last step is to sticking ceramic tiles.

 

Compared with the exposed installation, the appearance of the concealed shower is certainly more attractive. However, the maintenance is complicated and cannot be ignored. The water pipe fittings of the exposed shower are all on the outside. If the concealed shower needs to be repaired, we can only break the wall! But if you choose a good quality shower, except for the water pipe problem, you don't need to break the wall under normal circumstances.

 

If you really like the appearance, it is not a big problem to choose a concealed shower. But if you are still worried about renovation and later maintenance, it is recommended not to try it.

 

Shower Purchase Skills

1. When choosing a shower, try to make the shower tilted (to see the water effect). If the top spray holes are obviously small or there is no water at all, it shows that the internal design of the shower is very low. It is impossible for the user to have a comfortable experience.

2. Look at the coating and valve core. Under normal circumstances, the brighter and more delicate the surface of the shower, the better the coating process. The high-quality shower uses high-quality ceramic valve core, which has high hardness and wear resistance, and is not easy to drip. The rotating adjustment handle is also very smooth.

3. Everyone knows that if the shower is used for a long time, there will be scale and impurities deposits, which will block the water outlet. If the mesh cover cannot be cleaned, the shower will not discharge water normally; in order to avoid the blockage of the water outlet due to poor water quality. All the shower nozzles should stick out for easy cleaning.

4. Shower accessories will directly affect the comfort of our shower. This cannot be ignored. For example, whether the lifting rod of the shower is flexible. Whether the shower joint is equipped with anti-twist ball bearings. Whether there is a rotation controller on the lifting rod, etc.

5. The water-saving function of the shower is the key point to be considered when purchasing the shower. Some showers use a steel ball valve core, and are equipped with a hot water controller, which can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. This type of shower with a reasonable design saves 50% of water compared to ordinary showers.

Installation Precautions

1. Do a good job of cleaning up during installation, especially the valve core. During the decoration, it is inevitable that decoration dust or even large particles of impurities enter the water supply pipe. If it is not cleaned up, these impurity particles will enter the valve core of the shower faucet, easily causing blockage or even destroying the internal structure of the valve core. If the shower has little water output, it is very likely that the cleaning work is not in place.

 

2. To ensure safety, equipotential terminals are indispensable.

An electric shock prevention system is indispensable in the bathroom: equipotential terminal. After all, compared with other spaces, the bathroom is accompanied by water all the year round, and the risk is relatively high. Connect with the equipotential terminal to prevent leakage, electric shock, and avoid dangerous situations.

 

There are a large number of shower options. So everyone can try to choose different showers. Traditional showers have gradually been eliminated. We must learn to keep up with the trend in renovation project.

Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers. The products include faucets, sinks, basins,

bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.

Look forward to cooperating with you.

Thanks a lot!

Pink is considered the exclusive color of girls, and many people can't resist its unique tenderness and romance.

Pink is soft and compatible. It is a very versatile color. When used properly, it can add a unique texture to the space. It now occupies a very special place in home design.

For the pink bathroom space, how can it be decorated to be unconventional?

Combine Pink and Tiles

Worried that too much pink will look tacky? Then add the tile. The large pink walls are matched with tiles of different textures to make the bathroom richer, playful and unique.

Choose bright chrome bathroom accessories in the space to completely blend into the pink space. Towel bar, towel ring, storage basket, soap dish... a full set of configuration. Make the bathroom tidy and clean.

Pink Matches with Other Colors.

Pink is a very tolerant color. Green, which seems difficult to match, is combined with pink. A warm and cold mixed hue makes the space more fresh without any uncomfortable impact.

The sweet pink is matched with the black metal bathroom accessories. The calm black effectively neutralizes the sweetness of the large pink.

The black bathroom accessories with a strong sense of line give the space a sense of high quality.

Embellish the bathroom with pink, soft and not monotonous, elegant and vigorous. Let the space bloom with a different kind of charm.

Aquacubic Solid Brass Matt Black Concealed Overhead Rain Shower Faucet with Hand Shower. 

Waterfall shower head uses air pressure technology and can provide stable and powerful showers even at low water pressure.

Manufactured from premium material with outstanding corrosion resistant performance for ensuring high quality and better durability.

In addition to the living room and kitchen, the bathroom that we use every day must not be sloppy in design. No matter if it is more than 10 square meters or less than 2 square meters, you must plan well to use practical and safe bathroom equipment: whether to arrange full bathroom equipment (including bathtub) or half bathroom equipment (excluding bathtub), independent or combined hand washing basins, what materials should be used for floor tiles and walls, and how to effectively use small and distorted spaces without waste, how to place multi-functional equipment without being crowded. If you are being worried about these, you can refer to these 5 bathroom design ideas from style to function, and collect them as inspiration for future designs.

 

Bathroom Design One: Tiles

For a water-filled bathroom, the easiest way is to attach tiles, which are not only waterproof, but also dry quickly. Common 30*30cm tiles are easy to construct and easy to clean; mosaic tiles can be arranged in patterns, and wood grain tiles solve the problem of solid wood prone to moisture and mildew. Textured bamboo tiles also have anti-slip effects, which are both functional and can create multiple styles of bathroom design materials.

Bathroom Design Two: Cement wall

Using cement as the theme of the bathroom space makes the space pure, visually extraordinarily refreshing and clean. And there is no need to worry about the accumulation of scale in the crevices of the tiles. For maintenance, as long as the bottom is waterproof, the upper transparent waterproof paint is basically unlikely to have sanding problems.

 

Bathroom Design Three: Black Frame Glass

Industrial style can not only be used in public spaces. For small-sized houses and the bathroom of the master bedroom, black-framed glass can be used instead of solid wall partitions. Not only is it visually more open and transparent, it has its own style compared to ordinary glass compartments.

 

Bathroom Design Four: Separation of Dry and Wet

Similar to hotels and Japanese residences, sinks and showers can be separate. The independent design not only alleviates the problem of insufficient bathroom space, but also makes the sink a part of the room or public space, and it is also more convenient to use.

 

Bathroom Design Five: Shower Curtain as A Cubicle

If you want to have both a shower and a bathtub in a small bathroom space, try replacing the glass compartment with a shower curtain. In this way, the basic dry and wet separation can be achieved, and the space occupied by the fixed partition door can be avoided. It has high appearance and can change the pattern style according to the mood.

For decoration, it is not easy to choose a suitable washroom basin. There are a lot of basins that are just plain useless.

Should we choose an over-counter, under-counter, integrated or pedestal basin ?

Let's take a look at the advantages and disadvantages of these basins and see which features are what we want most.

The bathroom is sometimes a dirty space, which is not easy to clean and take care of. The dampness, dirt, and bacteria can easily breed. Well, there may be cockroaches and spiders...

To keep the bathroom clean and tidy, the two most important points are: easy to tidy up and keep it dry.

If you choose basins based on these two points, let's analyze them one by one.

Basin Style

 

Above Counter Basin (Always Beautiful)

I stayed in a hotel once. The bathroom design was very creative. There are two wash basins. One is a normal under-counter basin, and the other is an above-counter basin with excellent artistic sense.

I use the under-counter basin for washing, but I always glance at the above-counter basin like a work of art.

Almost all such beautiful above counter basins can become an installation art in the home. For those who are pursuing art decoration, you can consider buying an above counter basin.

 

Under Counter Basin (Practical)

The embedded under counter basin and the "invisible" shape make the wash area look more refined and simple. This is probably a basin that many families use more often.

 

The basin connected with the countertop (Easy to Install)

The countertop and the basin are integrally formed, which saves a lot of trouble for cleaning. Because it is a modular grouping mode, the installation has zero pressure.

 

Semi-hanging Basin (Saving Space)

A semi-hanging basin is suitable for some customers, if we want to leave a little more space.

 

Pedestal Basin (Long Legs)

Especially suitable for use in small spaces.

 

Cylindrical Basin (Artistic Sense)

The cylindrical basin can be disassembled. Because it is straight-through, it is not easy to block. The disadvantage is that there is no countertop for placing bathroom accessories.

The selection of the basin also needs to be decided according to the specific design plan, such as shape, color matching, size and so on.

Finally, in order to keep this space dry and clean, we need to use a dry towel to wipe off the water in time, ventilate as much time as possible every day, and so on. Although it may seem troublesome, once you develop a habit, it will naturally be a lot easier .

Sanitary ware is a must-have for household life. With the improvement of people's living standards, the market has been expanding. And after years of development, China's sanitary ware output has become the world's largest.

Competition in the low-end market is fierce. And difficult to enter the high-end market.

In recent years, China's sanitary ware market has been in a state of rapid development.

However, most sanitary ware companies have not been able to keep up with the pace of development, and management and marketing have not been standardized. The quality of employees is not high. Only a few companies have operated some well-known brands and opened up channels. This leads to vicious competition between enterprises and the market is occupied by a very small number of large and well-known enterprises.

 

The disadvantages of small sanitary ware companies are even more obvious: small scale, single product, outdated equipment... seriously lacking in competitiveness.

And several large foreign brands not only control the high-end market, but also become more and more competitive in price. They are gradually penetrating into the low-end market, which is an unprecedented test for small and medium sanitary ware companies.

 

Secondly, various costs such as materials and labor are rising. The rising cost puts more and more pressure on sanitary ware companies. In the face of many competitors, they have to increase advertising investment. By compressing their own profit margins, try to gain customers and open up sales.

For sanitary ware companies, especially small and medium-sized enterprises, it is tantamount to worsening the situation.

Some people say that the Chinese sanitary ware market is "handed over" by the Chinese themselves.

Only by occupying the high-end market, the enterprises can have a position; on the contrary, the smaller the share, the lower the position.

 

It is understood that China has become the world's largest bathroom consumer market. The performance and quality of many domestic sanitary ware brands have reached or even surpassed that of foreign brands. However, foreign sanitary ware brands have almost monopolized China's high-end sanitary ware market with their strong financial strength and high brand awareness.

In addition to historical reasons, the lack of brand awareness of domestic companies is an important reason for this situation.

Sanitary ware has been continuously developed and improved. More and more consumers not only pay attention to product price, quality, and after-sales service when buying sanitary products, but also pay attention to brand awareness and business reputation.

 

If the company still stays in the business philosophy of the seller's market in the past, it will definitely be at a disadvantage in market competition, and even be ruthlessly eliminated by the market. The sanitary ware industry has entered the era of brand marketing.

 

Liberate the shackles and keep up with the times

According to statistics, China's annual demand for ceramic sanitary products has reached 34 million pieces. It has become the world's largest consumer market for sanitary products. Last year, the output of ceramic tiles and sanitary ware products reached 7.5 billion square meters and 177 million pieces respectively. They account for 60% and more than 40% of the world's total output of architectural sanitary ceramics. The annual growth rate of products exported to Europe, the United States, Japan, South Korea, the Middle East and other places is 50%.

From the analysis of this trend, the Chinese sanitary ware market is quite optimistic. With a large amount of rigid demand, it can be said that the market is very good.

 

However, due to the comprehensive factors such as rising raw material prices, rising labor costs, and continuous floods and droughts this year, the domestic ceramic industry is in a downturn.

In response to the frequent occurrence of "overcapacity" and "market saturation" in the industry, the profit margins of small and medium-sized bathroom companies will be further compressed. More and more rational consumers do not intend to pay for it. The pressure of product backlog is considerable, and some Chinese factories have to stop running some production lines.

 

The ceramic sanitary ware industry is still very traditional in terms of management and marketing. Employees lack technical expertise. Therefore, only a very small number of companies have relatively well-known brands and relatively complete sales channels.

Many companies' own sales channels and sales management are obviously not standardized enough, and marketing is weak. The sales of products depend on a good relationship with distributors.

 

In addition, many companies do not have the ability to operate brands, a systematic business model and a professional marketing team; no accurate market information; no customer-oriented service standards and customer-oriented service system; no market-oriented research and development, production, and supply system. The capital investment cycle is long and the risk is high. All of these will become a time bomb that puts enterprises at high risk, and may be deadly at any time.

In summary, it is not difficult to see that an enterprise's internal operation management system urgently needs to be established, and market standards urgently need to be standardized. In addition, companies can stop running part of the production line, digest inventory, and wait for the peak sales season. Because there is real rigid demand, as long as the product is done well, no matter how the market environment changes, a certain effect will eventually be achieved.

 

The following are three suggestions for improving the status.

 

Keep Up with Quality

At any time, the quality is everything and will not lag behind. Consumers who spend money on goods, especially a household product, will certainly not tolerate quality problems. Update production equipment and other infrastructure. Although the cost is high, if you don't invest, it's just waiting to die.

 

Sales Channel Expansion

In the past, the marketing of sanitary ware companies relied on good customer relationships to a large extent. Lacking the ability to operate the brand; there is no standard customer service system and professional marketing team. These all increase the profit risk of sanitary ware companies invisibly. This is also an important reason why many sanitary ware companies say that "the product is good, but it can't be sold."

 

Keep Up with Service

Compared with methods such as updating equipment and adding stores, the investment in service quality improvement is much lower than the previous two. Moreover, there are more and more high-quality sanitary products in China. Whether to develop high-quality, considerate and personalized services to bring customers a better service experience has become most important for the product to stand out.

Some faucets are used two or three years, and the water flow is intermittent or rusted into green. The handle is hard to be used for opening and closing. The size of the water flow depends on luck.

Some faucets have been used for 20 years, and the surface is still as smooth as new. The feel when adjusting the angle of the handle is still as silky as the chopsticks in a honey jar. The speed of the water flow are still adjusted as you like. So how can we pick a faucet that can last 20 or 30 years or more?

First, the kitchen faucet can be rotated 360°.

For ease of use, the kitchen faucet should be taller, and the spout should also be very long. It is best to extend above the drain and not splash water. If there is a hot water line in the kitchen, this type of faucet should also contain hot and cold hoses. In order to meet various needs, most of the kitchen faucets can rotate the body of the faucet left and right. The sprayer part of some faucet can be pulled out, which is convenient for cleaning to all corners of the sink.

 

Second, if the budget is enough, the material of stainless steel is preferred.

The material of kitchen faucet is generally brass, which is the most common faucet on the market. However. Due to the characteristics of the kitchen environment, pure brass faucets are not necessarily the best choice. All pure brass faucets have electroplating on the outermost layer, and the function of electroplating is to prevent corrosion and rust of the brass inside. There is a lot of oily smoke in the kitchen, and the greasy hands and cleaners on the hands when washing the dishes make it often necessary to clean the faucet. If you do not use the correct way to clean, it is likely to damage the electroplating layer of the faucet, causing the faucet to be corroded and rusted. If you want to choose an all-brass kitchen faucet, you must be sure to have excellent electroplating, otherwise it will easily cause the faucet to rust and corrode.

And now some manufacturers use high-quality 304 stainless steel to make faucets. Compared with pure brass faucets, faucets made of high-quality stainless steel are free of lead, acid, alkali, corrosion, and harmful substances, and will not pollute tap water. This is very important for drinking water in the kitchen; and the stainless steel faucet does not need electroplating, it is extremely difficult to rust, and the hardness and toughness are more than twice higher than that of brass products, so it is very convenient to clean. However, due to the high difficulty of stainless steel processing, the current high-quality stainless steel faucets are usually relatively expensive.

 

Third, pay attention to whether the length of the tap can clean the sinks on both sides.

When buying, pay attention to the length of the basin and the faucet sprayer. If it is a double sink, pay attention to whether the length of the faucet can clean the sinks on both sides when rotating. Most kitchen faucets can rotate the body of the faucet left and right, which is convenient for cleaning to all corners of the sink.

The sink is the most important part for kitchen decoration. When cooking and washing dishes, 65% of the time is spent dealing with the sink. If you choose the wrong one and want to change, the countertops and cabinets will be changed accordingly, and you will regret it by then.

There are so many sinks, which one to choose without regret?

We summarized the advantages and disadvantages of the sink materials on the market, the experience of using single and double bowls, and the precautions for installation. Let you never make mistakes in the sink when decorating the kitchen.

 

Which is better for the sink material?

Common sink materials include stone, stainless steel, ceramics, etc.

 

Artificial Stone:

Advantages: good cleaning, seamless docking, various colors.

Disadvantages: the texture is not as hard as steel.

 

Many people say that the artificial stone large single bowl sink is easy to use. The capacity is large enough, comes with various drain racks, not afraid of scalding, and will not stain. Simply clean it for 2 minutes a day and it will be shining. If the countertop material is acrylic or quartz, it can be seamlessly connected, and there will be no annoying, moldy silica gel.

 

Granite:

Advantages: strong, scratch-resistant, wear-resistant, and high-temperature resistant.

Disadvantages: easy to scratch pots, bowls and tableware; need to clean up every day.

 

Granite is also a kind of stone, and it also has the characteristics of high hardness, wear resistance and high temperature resistance.

However, there are many disadvantages of granite. Because of its high hardness, if you drop porcelain utensils, they will break for sure.

Because it is super abrasion-resistant, to the degree of sharpening the knife, be careful when washing pots with paint on the surface. The sink can scratch the paint!

 

The stone has the characteristics of easy bleeding, especially when the sink has cracks. The colored liquid can easily penetrate into the stone. Colored liquids like soy sauce or corrosive liquids such as vinegar must not be poured into it, otherwise just wait for the dyeing later. It will cause big trouble in dish washing.

The most important point is that the stone breeds microorganisms at a super fast speed, so you have to wipe it every day like the bathtub!

 

Stainless Steel:

Advantages: anti-oil, anti-fouling, not afraid of acid and alkali, affordable, strong and flexible.

Disadvantages: prone to scratches and water stains (brushed stainless steel will be better).

 

Stainless steel has the characteristics of oil and dirt resistance, and because of its low hardness and easy processing, it has a variety of shapes. Many sinks are now integrally formed. A sink is stamped directly from one steel plate, which greatly saves production costs. Stainless steel is suitable for most families.

 

It is very important to choose a brushed matte surface, which is both dirt-resistant and wear-resistant. Imagine the water stains, handprints, and scratches left by washing dishes and pots after using the shiny polished stainless steel several times. It is simply horrible. The stainless steel sink of good quality has a uniform and fine brushed texture, and it feels very smooth, so that the oil can flow smoothly and will not remain. The inner corner of the sink should be rounded so that it will not hide dirt. To choose stainless steel, you must look for the SUS304 mark, and only the real 304 stainless steel can have quality assurance.

 

Porcelain:

Advantages: strong, acid and alkali resistant.

Disadvantages: heavier, easy to break, difficult to clean oil stains.

 

The biggest advantage of the ceramic sink is its good-looking appearance. Ceramic sinks are heavier than stainless steel sinks and lighter than stone sinks. The weight is relatively heavy, and it has an apron front, so installation is very laborious. And one of the most criticized aspects is that ceramics have a kind of adsorption ability for oil. If it is not cleaned for a while, the upper edge will become dirty. And it is also very laborious to clean.

But it's really beautiful.

 

Single Bowl or Double Bowl ?

Single bowl or double bowl, this is a topic that everyone is arguing about when choosing a sink. After reading the following analysis, you will probably know what suits you.

 

Single Bowl:

Advantages: easy to put in a large pot.

Disadvantages: ordinary faucet can not clean the entire sink(can be equipped with pull-down faucet); function is not partitioned (can be equipped with mobile sink).

 

There are so many fans for the big single bowl, because it is big and deep enough that a large wok can be stuffed. With a pull-out faucet, you can clean every corner of the sink.

Large single bowl generally refers to a bowl with a length more than 60cm and a width more than 42cm, otherwise it is a small single bowl.

 

However, a large single bowl is more suitable for a kitchen with an area larger than 4 square meters, and a small single bowl can only be selected for a kitchen with a small countertop.

Most of the sinks on the market are sold in sets. Many sink sets include accessories and gadgets. Although these accessories and gadgets are gimmicks under the guise of "giving away", they are actually added value of the sink. With them, the function of the sink can be more perfect.

 

For example, a rectangular colander can hold dishes, vegetables, etc. The drain holes are evenly distributed and can drain water quickly.

 

Some large single bowl sinks are also equipped with a hidden knife holder, which is more convenient and safe.

 

Double Bowl:

Advantages: double bowls, double functions.

Disadvantages: A single bowl is relatively small and can't hold large items.

 

Large double bowls can also hold large pots as long as the volume of the bowl is large enough. Can achieve the function of a large single bowl. The small bowl is used for water filtration, or install a water drying rack to wash fruits and vegetables.

 

The small double bowl is a bit inferior and can’t hold a wok or the like, but it’s still very convenient to have two bowls. The use of dual bowls saves time and effort and improves efficiency.

The double bowl originally has more functions than the single bowl, because most large double bowls will have accessories such as colanders and drying racks. It can be used in partitions, which is unmatched by a single bowl.

 

When washing vegetables, pots and pans, you can separate the two to avoid greasy vegetables. It can also be used separately when washing pots and pans alone. One sink for washing and one sink for draining water. And it can also save water.

 

One bowl for washing fruits and vegetables, and the other for washing dishes. 

 

The length of the double bowl is generally about 80cm. If the length of the counter is longer than 1.2 meters, double bowl can be installed. Many double bowls are designed as one big and one small. If you want to put the wok, the length of the large bowl should be more than 35cm, because the size of the wok is generally between 28cm-34cm. The disadvantage of the double bowl is that the sewer pipe is more complicated, and it is more prone to blockage and water leakage.

Therefore, if you choose a double bowl, it is necessary to buy a good strainer. If the inner wall of the drain is smooth, it is not easy to block. Some double bowls are equipped with threaded drain pipes, or relatively thin drain pipes, which tend to retain oil and cause unpleasant odors.

 

Above counter sink, under counter sink or one-piece sink?

Above Counter Sink:

All the edges of the sink are exposed on the countertop.

The cleaning of the above counter sink is very inconvenient. Over time, the glass glue on the edge of the sink will easily become moldy and black. The picture below may cause emotional upset, but the reality is always so cruel!

 

But its benefits are also very obvious, easy to install and cheap. And because edges are over the counter, the bearing capacity is very good. In case it is really disgusting one day and we can't stand it anymore, it can be easily removed as a whole. The space under the above counter sink is about 3 cm higher than the under counter sink. What does this show? It means that there is a large space under the sink for storage!

 

Under Counter Sink:

One wipe, everything is gone. The under counter sink is lower than the countertop. The water, residues, and vegetable leaves on the countertop will be in the sink with a single wipe. Super convenient. Generally speaking, the under counter sink is quite easy to clean. And it is very beautiful.

 

However, the installation of the under-counter sink is also more complicated. Not only do you have to prepare more installation costs, you also need to remind the decoration workers. Otherwise, it will generally be installed as an above counter sink.

 

In addition, once the under counter sink is damaged, it cannot be repaired and needs to be replaced as a whole. If the under-counter sink is used for a long time, the cracks will be moldy, so the mold-proof glue should be used between the under-counter sink and the countertop.

 

One-piece Sink:

Finally, the one-piece sink. One-piece sink refers to a sink that is an integral part of the countertop. It usually appears in the overall cabinet, and the countertop and the sink are seamlessly connected. The advantage is that there are no gaps, there is no need to worry about mold, and it is really easy to clean up. The disadvantage is that it is very troublesome to replace, which is equivalent to dismantling the entire counter.

 

In short, whether it is stone, stainless steel, or ceramics, whether it is a single sink or a double sink, it depends on the situation of your own house. As long as you choose the right material, bowl size and quantity, installation style, you can choose the best sink for your home.

Speaking of bathroom, the first thing many people think of is that we must separate wet and dry functions. After all, the traditional integrated type is too inconvenient to use. The bathroom is always wet, and even the towels have a musty smell. With the improvement of people's living standards, more and more people hope that the bathroom can be truly hygienic.

 

Three-way separation, that is, the basin area, shower area and toilet area are completely separated.

Advantages of three-way separation:

First, each washing area is an independent space, ensuring privacy while isolating smell and humidity;

Second, improve safety, especially for families with the elderly and children, and reduce the possibility of slipping due to water in the bathroom;

Third, ensure the cleanliness of the bathroom, and extend the service life.

 

How to create a three-way separation for a 3 square meter bathroom?

 

Square Layout

As soon as you enter the room, it is the washing area, which is the most frequently used area in the entire bathroom, so placing it at the door does not affect the use of other areas.

 

The middle position is the toilet area. The small toilet is separated by a baffle to form an independent space. If you feel that it is not private enough, you can install a small shower curtain to completely separate the toilet area. This is generally not recommended. After all, it affects the appearance, and it also gives people the feeling of being cramped.

 

The square space uses all the walls. A few niches or horizontal partitions are placed on one end of the bathtub to hold bath towels and clothes. The bath area is designed in the innermost part, the edge of the bathtub itself is an isolation belt, and the shower head is installed on the wall at the other end of the bathtub, which is convenient and does not take up space.

 

Although the square space is not very easy to handle, it can be regarded as "excellent brushwork" through this elaborate design.

 

Rectangular Layout

Compared with a square bathroom, a rectangular space will make the best use of everything.

The same is the wash area next to the door. The difference is that the rectangular space also has a place to put the washing machine. When you take a shower, you can throw your clothes into the washing machine.

Placing the toilet and shower in parallel on the innermost side and covering the tub with a shower curtain.

 

The above are two designs of 3 square meters bathroom. Of course, there are more design styles, such as a sliding folding door instead of a shower curtain.

 

This folding door design not only saves space, but also has good privacy. Very practical. 

With some simple lighting, the bathroom can also be a beautiful scenery. 

The barn door design completely separates the bathroom area.

 

Bathtub

A small bathroom doesn't necessarily need a bathtub. But if removing the wall partition and replace it with a shower curtain, there will be  bathtub area.

Shower Room

The shower room can be placed in the triangular area at the corner of the bathroom to form a fan-shaped area, which is the most space-saving.

 

Toilet

It is best to use a small size. After all, if the toilet is too big, it doesn't seem to be of much use except for taking up space.

What are the precautions for the three-way separation?

 

Color Tone

Because the space is relatively small, the tones of the floor tiles and the walls should be matched reasonably. It is best to focus on warm colors, which are swelling colors. They have the effect of "expanding" the space.

 

Mirror

Try to choose a mirror as large as possible. The role of a large mirror is the same as the color tone, which increases the sense of space.

 

Storage

The corners must not be wasted. Simple wooden shelves and niches are good storage methods.

 

Ventilation

The last thing we must pay attention to is ventilation. It is important to reduce odors. 

A pot filler tap can add a touch of professional and practical convenience and versatility to your kitchen. Available in a range of finishes which include Chrome, Nickel, Pewter and Gold, or opt for a more traditional finish such as Brass or Bronze Sort By: 1- 24 of 24 items Save ￡108.97 Perrin and Rowe 4798 ARTIQ POT FILLER - CHROME

Single Handle Bathroom Faucet complete set (Trim plus valve) Part Number : FAMO 700RB

Double Holes Basin Faucet 16,161 products found from 461 Double Holes Basin Faucet manufacturers

Home > Tags > High End Bathroom Faucets (Total 24 Products for High End Bathroom Faucets) High End Bathroom Faucets - manufacturer, factory, supplier from China

25/11/2022· Multifunctional Outlet Water Effect---3 way spray setting (STREAM,SPRAY,PAUSE),stream for filling water, spray for rinsing, pause for avoiding splashing in multitask mode.CEC listed. Flow Rate: 1.8 Gallons Per Minute. more 2 Kitchen Faucet-WEWE Single Handle Stainless Steel Brushed Nickel Pull Down Kitchen Sink Faucet with Pull Out …

Find many great new

Cheap Basin Faucets, Buy Quality Home Improvement Directly from China Suppliers:Waterfall Antique Brass Basin Faucet Bathroom Hot and Cold Sink Mixer Water Tap Decked Mounted High Vanity Faucets Crane BF015 Enjoy Free Shipping Worldwide! Limited Time Sale Easy Return.

Automatic Infrared Faucet in Basin Faucets from Manufacturer, Find professional Automatic Infrared Faucet Suppliers on ECVV-Chinese industrial goods procurement service platform. MRO Products Mall/AE