Universal Solid Pull Down Faucet- Suppliers Factory Manufacturers From China

How to define accessible luxury?

It is not only a design style,

It is a high-style life philosophy.

It is prosperous in a minimalist place,

Elegance is not complicated, simplicity is not simple.

 

Accessible luxury is not simple. It has a variety of manifestations.

Warm, light and luxurious, noble and comfortable

A touch of orange brightens the whole space,

Match with gray tile floor and brown wall,

It highlights the high style of the whole space.

 

Nordic luxury, elegant style.

The main color is gray.

Large light gray marble walls,

Decorate the whole space with a piece of green plants,

With light gray bathroom cabinet,

It's bright and comfortable.

 

Simple, light and luxurious, elegant and advanced

To simplify, black and white color covers the whole space.

Spacious wall space,

Complete set of black bathroom Shower Faucet,

Not only meet the requirements of storage, but also decorate the bathroom.

 

A variety of accessible luxury bathrooms,

With unique charm,

More possibilities for home,

Bring luxury and elegant life enjoyment to the customers.

Towel bar: Towel bar is used to hang towels. The installation position is generally a position closer to the bath, and the installation height is generally 1.4 to 1.6 meters from the ground. The installation height should not be too low, otherwise the towel will get wet when bathing. The installation methods of the towel bar can be summarized into two types, one is to install without punching and the other is to install with emptying. Hole-free installation methods generally include vacuum suction cup type and watering type. Screws are generally used for drilling holes. Nowadays, many families prefer the non-punch vacuum suction cup installation, because it is easy to install, fast, and does not require much effort when disassembling. It does not cause any damage to the wall, but after a long time, it is easier to loose and fall off.  The fixing force is not as strong as screwing. The watering type, as the name implies, is fixed on the wall with nail-free glue. It takes more time to install, but the cost savings are better than others.

Towel rack: The towel rack is used to place bath towels. The installation location is next to the towel bar or in an open position in the bathroom. You can design the installation location according to the characteristics of your own bathroom. The length and width of the bath towel are several times that of the towel. The height of the installation is naturally higher than that of the towel bar, but it mainly depends on the average height of the family members.

Toilet paper holder: The toilet paper holder is used to place toilet paper. It is generally installed next to the toilet. The installation position should be lower than the toilet. If it is installed higher than the toilet, you can imagine how inconvenient it is.

Toilet brush holder: The toilet brush is generally installed next to the toilet, and it is recommended not to install it next to the toilet paper holder. The toilet brush usually contains bacteria when cleaning the toilet, and then the air around the toilet brush has many bacteria, and the bacteria are easy to adhere to the paper towel.

Storage basket: The storage basket is generally installed near the shower, and is used to place items such as shower gel and shampoo for easy bathing. The installation height is generally one meter two to one meter four. These are just for reference, and are of no practical use. You can design according to your own habits and believe in yourself.

Clothes hook: The characteristics of stainless steel clothes hooks are reflected in high temperature and low temperature resistance according to physical properties, and corrosion resistance and not easy to rust according to chemical properties. They are expensive and expensive, and are suitable for bathroom use. Space aluminum clothes hooks are characterized by not easy to fade, good environmental performance, not easy to rust, and easy to dye. The clothes hooks made of space aluminum materials on the market are rich in colors, strong in decoration, and low in price. The disadvantage is that the pressure resistance is weak. Not suitable for hanging heavy objects, suitable for various places. The copper clothes hook itself has high material density and good stability, so it is not easy to rust, resists pressure and is heavy, and is more expensive in the market. It is suitable for kitchens, living rooms and other places. Aluminum alloy is made of pure aluminum with some alloying elements, so aluminum alloy hooks are slightly better than space aluminum hooks in terms of performance. Zinc alloy is an alloy formed by adding other elements based on zinc, so zinc alloy clothes hooks are characterized by good manufacturability, long use time and easy cleaning. Wooden clothes hooks have low immunity to humid environments, poor physical properties, but strong decoration, suitable for living rooms, bedrooms, study rooms and other locations. Plastic clothes hooks are easy to mold, so most of the plastic clothes hooks on the market are not only highly decorative but also low-cost. The disadvantage is that the surface is not resistant to dirt and it is inconvenient to clean.

When we buy, we must consider the actual situation at home. Choose the right size and the required rack. Don't buy the package blindly. Some things may not be useful.

Kitchen Design

When designing a functional kitchen, the rule of triangles should be kept in mind. That is, the sink, stove and refrigerator are arranged in a triangle. The L-shaped kitchen fits this triangle shape very well. The L-shaped layout is most suitable for small and medium-sized kitchens. The first-class kitchen is not only about the layout, but also about creating delicious food through the inspiration of the right layout.

1. Industrial style kitchen design.

 

2. This sweet gray kitchen is equipped with golden cabinet handles and natural wood fittings. The table with green leaves adds a lot of color to the small kitchen, which can maximize the dining space in an instant.

 

3. The wine glass is the focus point of this home, highlighted by the light from the strip lights in the glass cabinet.

 

4. If because of space reasons, wall cabinets cannot be customized. An open kitchen can be realized by gradually narrowing the cabinet width.

 

5. Design a peninsula in the center of the kitchen by extending the cabinets.

 

6. Here is not only an L-shaped cabinet, but also a floor of the same shape.

 

7. Choose white locker. And choose blue floor cabinets and wall cabinets to break the appearance of one color and long layout.

 

8. If the kitchen has a window facing the outside, the kitchen sink can be located in front of the window, just like this green kitchen.

 

9. In this black kitchen, the ceiling extension is also black and equipped with spotlights. The accessory materials on the ceiling add color to the layout, and the two-color cabinets have unique light and dark design.

 

10. A series of pink designs and copper accessories are matched with pink blue decorations to exude perfect contrast and warmth.

 

11. The golden honey color and black bring the perfect color combination to the light gray and white kitchen.

 

12. The golden faucet, silver oven, copper vases and candle holders add highlights to the white kitchen.

 

13. You can merge two separate rooms together, like this kitchen with a washing machine.

 

14. The floor cabinets and wall cabinets are right-angled and uniquely arranged.

 

15. Use two rows of wall cabinets of different depths to break the rigid arrangement of parallel double rows.

 

16. L-shaped wall cabinet with recessed lighting. Create a unique kitchen layout through a series of different color combinations.

This article introduces the three main components of the faucet. It will help you to understand the quality and material of faucets we use everyday. Uncover all the mysteries of the faucet.

 

Part 1: Composition

The three most basic components of a faucet: main body, plating and cartridge.

01 Main Body

The main body is the torso part of the faucet. The water flows in and out of the main body all the time. So the material is important. It determines the water quality.

 

Copper Alloy Faucet

Copper alloy is currently recognized as the most suitable main material for home use faucet, and the mainstream is brass. On the one hand, copper has good machinability, fluidity and formability. On the other hand, because copper ions have a bactericidal effect, they can kill super bacteria such as MRSA within 30 minutes and prevent the bacteria from producing antibodies. The inner wall of the copper faucet will not breed bacteria and become the most suitable carrier for "water".

 

According to different proportions of copper content in copper alloys, copper alloy materials can be divided into 52, 55, 59 and 62 copper. Among them, 59 copper is the best. The content of copper metal is 58%-60%, the content of lead metal is 0.08%-0.2%, and the content of other elements is about 2%. The remaining metal is basically zinc.

 

Because lead metal will precipitate when water enters the faucet, it will pollute the water. If the lead content is too high, it is harmful to the human body. Therefore, some brand faucets use low-lead copper, that is, the lead content is less than 0.1%. In view of the fact that it is difficult for general consumers to judge the lead content, it is recommended to choose a faucet with a clear mark that uses low-lead copper.

 

Zinc Alloy Faucet

Zinc alloy is an alloy based on zinc and added with other elements such as aluminum, copper, magnesium, cadmium, lead, and titanium. Zinc alloy is easily corroded in water. After being corroded, the metal will be mixed into the water and cause harm to the human body. The biggest advantage is probably the low price.

 

Stainless Steel Faucet

The main components of steel are iron and carbon. Ordinary carbon steel is easy to rust. Adding chromium, nickel and other metals to carbon steel can make the steel corrosion resistant. Therefore, the most important factor affecting the corrosion resistance of stainless steel is the content of chromium.

 

Stainless steel has the advantages of acid resistance, alkali resistance, corrosion resistance, and no release of harmful substances (lead). But compared with copper, it has one of the biggest drawbacks, that is, it does not have antibacterial function.

 

Brief Summary

If the budget is sufficient, choose low-lead copper faucets. If you can't identify whether it is low-lead copper, choose a product from a big brand.

If you have a small budget, you can choose stainless steel faucets. The price will be cheaper. However, relatively there will be some problems. In particular, we must choose products from high standard manufacturers. After all, it's about your own health, don't be greedy for cheap.

 

 

02 Plating

The faucet is used in a humid environment, and its surface requires a good finish. The common surface treatment method on the market is electroplating, mainly including chrome plating, nickel plating, titanium plating and so on. In addition, there are some rarer methods such as baking varnish, porcelain, and imitation gold electrophoretic paint.

 

Chrome

Chrome plating is the most common faucet plating. Chromium is a white metal with a bluish color, which has high hardness and wear resistance. Its hardness exceeds even the hardest quenched steel, second only to diamond.

Chromium is not easy to change in a humid environment and can maintain the surface gloss for a long time. With a silver appearance, chrome-plated faucets are more popular with consumers.

 

Nickel

Nickel can quickly form a very thin passivation film on the surface of the faucet. Can resist the corrosion of water vapor and certain acids. Has excellent corrosion resistance and stability. Can resist the corrosion of water vapor and certain acids. Therefore, the stability of the nickel layer in a humid environment is very high.

Titanium Alloy

Titanium alloys are made by adding aluminum and tin elements or aluminum and vanadium elements to titanium. Electroplated titanium gold has the advantages of high strength, low density, strong toughness and good corrosion resistance. The surface of the titanium-plated faucet is as smooth as a mirror. Its golden luster looks elegant and rich, and very decorative. However, the process of plating titanium gold is complicated. It is very easy to absorb impurities during thermal processing. Therefore, the yield is low. The cost is also higher.

 

Baking Varnish

Baking varnish is to put two layers of coating on the faucet. Each time the paint is applied, it is sent to a dust-free constant temperature baking paint room for electric heating or far-infrared high temperature baking.

The surface of the baking varnish faucet is smooth and shiny, which can present a visual texture similar to that of a piano, making the whole product look very high-grade. However, compared with other surface treatment methods, baking varnish faucets are more prone to surface peeling. The durability is not as good as the traditional chrome-plated faucet. This method is not widely used.

 

Brushed

This treatment will make the surface of the faucet visually rough. However, it is quite delicate to the touch, showing a restrained beauty. The brushed process mainly relies on mechanical friction to produce several common textures such as straight lines, chaotic lines, threads, corrugations, swirling lines and intermittent silk lines on the surface of the faucet. It can also create matte, mirror, three-dimensional, embossed, satin and other effects.

 

Brief Summary

Appropriate surface treatment can make the overall shape of the faucet rich and full. Choosing the right faucet can also become the finishing touch to the bathroom decoration. It is pleasing to the eye.

There are generally multiple layers of plating. There are also some cheap faucets that are only coated one layer. The coating is not as thick as possible, but just right. If the coating is too thin, it will not be able to prevent corrosion. If the coating is too thick, it is easy to peel off. Copper + nickel + chromium is best. Copper can provide excellent adhesion. Nickel makes the coating have excellent corrosion resistance. Chromium makes the surface bright and flawless, and it is hard and scratch-resistant. Further improving the corrosion resistance. In addition, the faucet that has passed the 48-hour professional salt spray test will be more guaranteed in terms of corrosion resistance. Aquacubic's products have passed these tests.

 

03 Cartridge

The cartridge is a part that realizes the basic functions of direction control, pressure control or flow control by means of the rotation of the valve stem. The water flow enters the main body of the faucet through the cartridge and finally leaves the water outlet. The faucet used at home is turned on and off countless times a day. It can be seen that the quality of the cartridge is also very important to the faucet.

Ceramic Cartridge

The ceramic cartridge has less water pollution, good wear resistance and good sealing performance. Many high-quality faucets use ceramic cartridges. The ceramic chip must have good airtightness, stable physical properties, wear resistance, and long service life.

 

Stainless Steel Cartridge

The biggest advantage of the stainless steel cartridge is that it has a larger adjustable angle of rotation and is not easily affected by water quality. It is more practical to choose this type in areas with poor water quality. However, stainless steel has worse wear resistance compared to ceramic. After it is used for a long time, water leakage is prone to occur.

 

Roller Cartridge

Roller cartridges are old-fashioned cartridges. No matter in terms of price, water pollution or life span, they are inferior to ceramics and have been phased out. There are very few roller cartridge faucets on the market.

 

Part 2: How to Buy ?

After understanding the most important parts of the faucet, let's take a look at the precautions when purchasing.

 

01 The Weight

Faucets made of brass are heavier. So you can make a preliminary judgment by weighing the faucet. However, many manufacturers can increase the weight of low-quality faucets through some methods. So here is a commonplace saying, for consumers who can't distinguish the material, it is better to choose the leading brands. This is the simplest selection method.

02 The Surface

In sufficient light, carefully observe the electroplated surface of the faucet. Good electroplating looks as bright as a mirror, without any oxidation spots and burn marks, no pores, no blistering, no plating leakage, no burrs to the touch. After pressing the faucet, the fingerprints will spread out quickly, and it is not easy to adhere to dirt.

 

Breathing out the surface of the faucet. For products with good electroplating quality, the water vapor will quickly and evenly fade away. If the quality is not good, the fading speed will be slower, or not fade. The faster and more even the water vapor fades, the better the quality.

03 After-sales Service

The after-sales service of the product is very important, and it is also the guarantee for you to have no worries. Be sure to buy products with good after-sales service. The general faucet is guaranteed for at least 5 years.

 

When choosing a faucet, the most important thing is to look at the material, plating and cartridge of the faucet. Because the material determines the safety of the water. The coating can increase the service life of the faucet, so that the faucet has scratch resistance, corrosion resistance, and the surface brightness will be better. The cartridge is the heart of the faucet. Generally high quality faucets use ceramic cartridges. It has the characteristics of strong wear resistance and good sealing performance.

Many people want to have a bathtub in their homes. But it may be because of too small space, living habits or budget, and they choose to give up. The bathroom is worth planning. Today, we will introduce how people who don’t have a bathtub at home have arranged their own bathrooms.

 

1. All White Bathroom

Decorate the bathroom in all white. In this clean and concise space, everything is a pleasure. A little dirt will be found, and it can be cleaned and removed immediately. People who like white usually also like to tidy up the room.

However, when the bathroom is completely white, and even the bath towel and bathroom bottles are pure white, it is more obvious whether the color of the caulk, bathroom hardware, and electroplating are uniform.

 

Some bathrooms will have a combination of tiles and paint. People who pursue all whiteness should pay attention to whether there is a color difference between the paint and the tiles.

White marble covers the room, and with black hardware, the style immediately rises.

 

The glass partition does simple dry and wet separation, which does not affect the overall natural lighting.

 

2. Grey Bathroom

Those who find it troublesome to clean the bathroom can consider gray as the main color of the bathroom. Compared to the white tiles, the dirt looks less obvious on the dark gray. The entire cleaning can be completed in 5 minutes.

 

This bathroom uses different tiles, low-key but full of changes. Of course, the most eye-catching among them is the hexagonal tile.

 

Bronze-colored hardware has always created a nostalgic circumstance.

Some people use cement powder to decorate the bathroom, but the cement powder is prone to cracking and sanding. It is not recommended to use it in the bathroom, especially the shower area.

 

3. Wood Grain Bathroom

Whether it is Japanese, country, modern, classical and other themes, you can see the use of wood grain. If you want to step into a healing bathroom after work, wood grain is a great choice.

Because most bathrooms are not suitable for solid wood due to poor ventilation, wood-grain tiles are better.

 

Due to the different regional climate and bathroom ventilation conditions, many foreign wood that can be placed in the bathroom is not suitable for moving to China.

 

If the overall bathroom is white, it is also very eye-catching to use a set of wood-grained vanity cabinets.

 

Thanks for viewing our website. Hopefully you can find your interested items. 

Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business.

The bathroom is full of water vapor after taking a shower? The bath water splashes on the ground? Sometimes you slip and fall accidentally? The bathroom without separation of wet and dry is simply maddening. The separation of wet and dry is an unavoidable matter in the bathroom. As long as we have a slight requirement for the quality of the bathroom, we will immediately take care of this matter. Because the separation of wet and dry in the bathroom is a very cost-effective job, it will make your bathroom life full of happiness in minutes. How to achieve the separation of dry and wet in the bathroom? For small-sized bathrooms, the partitions are too narrow, and they cannot be separated from wet and dry. Very tangled. So how to separate wet and dry in a bathroom of only about 5 square meters? Let's analyze how to separate wet and dry in a small bathroom!

 

Separated by Shower Curtain

The shower curtain is the simplest and most beautiful way to separate wet and dry in the bathroom. It can be said to be a must-have artifact for the bathtub. Use a shower curtain to separate the dry and wet areas of a small apartment, which is the most trouble-free and cost-effective. Whether it is an arc-shaped corner, or directly draw a straight line, make a water retaining strip and hang a shower curtain. It is very convenient. You can also frequently change the style of the shower curtain to a different style. But the disadvantage is that it cannot effectively block water vapor, and it is easy to grow mold and needs to be cleaned frequently.

 

Glass Partition

Compared with the shower curtain which can not effectively isolate the water vapor, the shower door is much more practical. More suitable for bathrooms equipped with showers. The shower door is mostly made of glass. Glass partition is a better choice. On the one hand, because the glass is transparent, it does not appear to be visually narrow. Second, because the glass has better water resistance, the effect of wet and dry partitions will be better.

 

Half Wall Partition

For small apartments, this is also a good choice. Not only can it perfectly achieve the purpose of separating dry and wet, but also use the half  wall to create its own style. Pasting retro-style or modern-style tiles on the wall can play a decorative and beautifying role.

 

The water pipe under the sink does not contact the floor.

In addition to working on the door, you can also separate wet and dry in places such as sinks and basins. The important point is to not to touch the floor! Bathroom furniture that is not exposed to water stains is less likely to be corroded, which increases the service life and is also easy to clean.

 

Move the Sink Out

The most complete wet and dry separation is to move the sink directly outside the door. Use part of the outside space to make the shower area inside the bathroom more spacious. In addition, the external washbasin also allows a family to wash without interfering with each other. The vanity and sink are placed outside the bathroom. Completely cut off the moisture in the bath. Small apartments can also use the walkway outside the bathroom to do so!

 

Do you like the bathroom with separate dry and wet function? The dry area and wet area of the bathroom are perfectly separated, which not only partitions the space, but also is visually more fashionable and rich in spatial level. Wet and dry separation has gradually become mainstream in bathroom design, so hurry up and give it a try!

ALWEN Dual handle bathroom faucet, a luxury modern contemporary three hole bathroom vanity sink lavatory faucet. Brushed nickel/Chrome finish. UPC, cUPC, NSF certified, lead free bathroom faucet.

Description

This bathroom faucet comes in a beautiful polished chrome finish and is practical and stylish. Its center set design with handles will keep your bathroom simple, modern, and keeping space tight and easy to clean.

Features:

Solid Brass construction to resist rust, corrosion, and tarnish

Swiss NEOPERL Aerator ensures perfect water flow and environment friendly. 

High Arc faucet spout ensures enough space for washing hands and clean.

Aquacubic provides "Quality Bath & Kitchen Solution" to our customers.
Quality is always the first priority of Aquacubic. We understand the importance of quality to our clients, and quality is the foundation for long -term cooperation. To deliver high quality products, we established the whole quality system from raw materials checking to mass production audit and final products inspection. Most of our products are CE and CUPC certified.

Cooperating with Aquacubic is cost saving. Aquacubic make great investment in machines to increase production efficiency. Thanks to long existence in the industry and good relationship with material suppliers, Aquacubic has good cost control system and bargain power, to ensure competitive pricing for our customers. Once you contact with Aquacubic, you will find yourself are in service of a hardworking, reliable, sincere team with good communication skills. Our associates also provide value-added service for design, test report, shipment arranging, freight cost control and so on.

Aquacubic has rich experience and passion in bath and kitchen industry and appreciate for your contacting and business.

The kitchen sink is a kitchen ware that every family must have. Because the sink is used most frequently in the kitchen, the kitchen sink must be installed carefully in order to avoid some troubles when using the sink later.

The installation of the kitchen sink is not a major project, but you must pay attention to the details. If you want to rework, it will involve cabinets and countertops, and the workload is huge.

When the kitchen sink is actually installed, although it can be placed in the final process of the kitchen, it needs to be considered when designing the cabinets at the beginning. The cabinet design should leave a space for the sink, at least to ensure that the sink can be installed. Also, when making the countertop, an approximate size of the sink must be provided to facilitate the opening of the countertop. Of course, it is best to have a specific drawing size. Then tell the workers who make the countertops, which way you want to install the sink, above counter, farmhouse, or under counter? Because the hole size of each installation method is a little different.

The following introduces some basic processes and details of the kitchen sink installation, so that you can know what should be paid attention to when checking.

1) When the sink is installed, the faucet and the water pipe are usually installed at the same time. The current faucets are generally hot and cold, so you have to connect the hot and cold water pipes, and don't get confused.

2) After the faucet is installed, connect the drain set. The overflow hole pipe and the downhole pipe are directly connected. If you need to connect the waste water pipe of the dishwasher or water purifier, you can first connect a tee to the drain pipe of the sink. All joints must be kept tightly sealed, otherwise there will be problems such as water leakage and water seepage.

3) If the sink is equipped with an installation buckle, it is necessary to fasten the installation buckle to prevent displacement and unevenness of the sink.

4) After the sink is installed, a leak and drainage test should be done. The method of testing is to fill the sink with water and see if there is any leak in the tank. Because the quality of some sinks is not good enough, there will be blisters, cracks and other reasons on the finished product that cause the sink to leak. If there is no leak, open the drain and let the sink perform a drain test. When draining, pay attention to whether there is water leakage at each interface of the sewer pipe, whether the tank drains smoothly, and whether there are too many residual water marks.

5) After doing a series of tests, if there is no problem, the edges around the sink can be sealed. Applying waterproof glue, and doing some beautification work in the follow-up. Now we have basically completed the entire installation of the sink.

During the entire installation process of the sink, the most important thing is to pay attention to the tightness. Pay attention to the contact position of the sink and the countertop or the junction of the water pipe. So as not to cause water leakage. After the sink is installed, most houses are still in the process of renovation. So keep the sink tidy and clean, and try not to expose it. Too much dust and debris will fall in the sink during decoration. If it is not cleaned up in time for a long time, it may cause problems such as watermarks and rust in the sink.

So after installing the sink, clean the sink, try to wipe off the water stains, and then cover it with a plastic cloth. When you check in later, you can open it and clean it up again. Basically, it can avoid watermarks and rust in the sink after moving in.

shower rod metal Adjustable on sale manufacturers, find details about shower rod metal Adjustable manufacturers, supplier and wholesaler - AQUACUBIC. Home Products Kitchen Kitchen Sink Bathroom Bathroom Sink Bathroom Accessories Shower Head Shower

24/11/2022· Bastone Basin Shower Mixer Tap Kitchen Faucet Bathroom Spout Wall Chrome Silver Condition: Brand New series Quantity: 9 available Price: AU

Part 1: Removal of old two-handled faucet Step 1: Get started Clear out all the supplies and products from the cabinet under the sink. Inspect if there is an electrical outlet under the sink. If any, for safety, turn off the power line before you start. Step 2: Wear safety glasses You may need to work upside down under the sink.

CELAENO 33" X 21" Farmhouse Sink, Fireclay Ceramic Single Bowl Kitchen Sink, White Apron Sink with Protective Bottom Grid and Strainer… 46

JIANGMEN MEIAO KITCHEN AND BATH CO.,LTD Tel：86-13392092328 Email：manager@meiaogroupTel：86-13392092328 Email：manager@meiaogroup. Select Language

Find your perfect stainless steel or PVD kitchen sink with GROHE. The GROHE K-series of stainless steel sinks has size and style options for every type of kitchen. Choose from 1, 1.5 or 2 bowl sinks. Select a flat-edge, top-mounted, …

Pfister LG49-TNT2 Tenet 1.2 GPM Wall Mounted Widespread Bathroom - Matte Black by Pfister (4)

Sinkology K808-B60 Turner Farmhouse/Apron-Front 30 in. Single Bowl Fireclay Kitchen Sink with Strainer Drain, 30 inch, Crisp White 8 Sinkology K990-B72 Austen Farmhouse/Apron-Front 36 in. Single Bowl Strainer Drain Fireclay Kitchen Sink Kit, 36 inch, Crisp White 17