decked mounted basin faucet- Suppliers Factory Manufacturers From China

Some faucets are used two or three years, and the water flow is intermittent or rusted into green. The handle is hard to be used for opening and closing. The size of the water flow depends on luck.

Some faucets have been used for 20 years, and the surface is still as smooth as new. The feel when adjusting the angle of the handle is still as silky as the chopsticks in a honey jar. The speed of the water flow are still adjusted as you like. So how can we pick a faucet that can last 20 or 30 years or more?

First, the kitchen faucet can be rotated 360°.

For ease of use, the kitchen faucet should be taller, and the spout should also be very long. It is best to extend above the drain and not splash water. If there is a hot water line in the kitchen, this type of faucet should also contain hot and cold hoses. In order to meet various needs, most of the kitchen faucets can rotate the body of the faucet left and right. The sprayer part of some faucet can be pulled out, which is convenient for cleaning to all corners of the sink.

 

Second, if the budget is enough, the material of stainless steel is preferred.

The material of kitchen faucet is generally brass, which is the most common faucet on the market. However. Due to the characteristics of the kitchen environment, pure brass faucets are not necessarily the best choice. All pure brass faucets have electroplating on the outermost layer, and the function of electroplating is to prevent corrosion and rust of the brass inside. There is a lot of oily smoke in the kitchen, and the greasy hands and cleaners on the hands when washing the dishes make it often necessary to clean the faucet. If you do not use the correct way to clean, it is likely to damage the electroplating layer of the faucet, causing the faucet to be corroded and rusted. If you want to choose an all-brass kitchen faucet, you must be sure to have excellent electroplating, otherwise it will easily cause the faucet to rust and corrode.

And now some manufacturers use high-quality 304 stainless steel to make faucets. Compared with pure brass faucets, faucets made of high-quality stainless steel are free of lead, acid, alkali, corrosion, and harmful substances, and will not pollute tap water. This is very important for drinking water in the kitchen; and the stainless steel faucet does not need electroplating, it is extremely difficult to rust, and the hardness and toughness are more than twice higher than that of brass products, so it is very convenient to clean. However, due to the high difficulty of stainless steel processing, the current high-quality stainless steel faucets are usually relatively expensive.

 

Third, pay attention to whether the length of the tap can clean the sinks on both sides.

When buying, pay attention to the length of the basin and the faucet sprayer. If it is a double sink, pay attention to whether the length of the faucet can clean the sinks on both sides when rotating. Most kitchen faucets can rotate the body of the faucet left and right, which is convenient for cleaning to all corners of the sink.

In China some people say that the struggle in the big city is so hard. Why not go to work in a small town? Is it worth struggling to afford a small apartment for a lifetime? I believe many people will find it worthwhile, because in big cities there are opportunities that cannot be found in small towns. The small apartment is not terrible. We can remodel it. As long as we have a dream, everything is possible. The owner Mr. Zhang who lives in Shanghai, like most ordinary citizens, worked hard all the way from the small hometown and finally settled in Shanghai and bought an apartment of 70 square meters. After having a child, Mr. Zhang took his parents from his hometown. A family of 5 squeezed into a small apartment. There was only one bathroom. Every morning and every evening, they were faced with taking turns to line up to take a bath and wash. They had no patience after some time. So he thought about making another shower room, and he can make the most of the balcony. Looking at the balcony that costs him a lot, only used to pile debris and dry clothes, Mr. Zhang felt it was a pity. He had heard of a case of transforming a balcony into a shower room before, so he wondered why not give it a try. If it fails, it will be dismantled after all. After talking to his wife, Mr. Zhang started serious research. After careful study, he summarized the following points to note:

 

First of all, it must be waterproof. Due to the special location of the balcony, the back may be the living room or bedroom. Considering that moisture may cause mold and peeling on the back wall, it is recommended that the waterproof layer of the wall where the shower is installed is painted as high as possible. The waterproof coating is generally brushed 2~3 times.

 

Second, make sure that the ground has a slope. The ground also needs to be waterproofed, and it is also necessary to ensure that the ground has a certain slope so that the sewage from the bath is discharged to the drain and will not flow back to the living room or other places.

 

Third, strengthen heat preservation. There is a big difference between the balcony shower room and the indoor shower room. Generally, the indoor shower room has only one wall with windows, and it can be kept warm by installing a heating system.

 

Finally, pay attention to the issue of privacy.

 

After studying how to install it, the next step is to choose a good shower room. Which products can meet this special demand? Because the balcony shower room is unavoidable from the wind and sun, we must pay attention to its material and anti-rust, anti-corrosion, and anti-fading ability. At the same time, pay attention to whether the frame is strong and stable, and the wall of the shower room must be strong.

 

After comparison, Mr. Zhang finally chose this shower room. This shower room is based on apartment space. The large apartment frame glass curtain wall, angular and cylindrical surfaces make the entire bathroom space richer.

At the same time, automotive-grade toughened glass has a thickness of 10MM, can withstand 700° high temperature, and has a high strength about 5 times that of ordinary glass, with outstanding impact resistance and thermal stability. In addition, EPM steel mold protection is added, so you don't have to worry about the risk of glass bursting. Even if it breaks, it will still stick to the debris to prevent the glass from splashing and hurting people. You can take a shower without restraint.

The door frame, handle and hinge outside the main body of the shower room are all made of high-quality aluminum alloy, and the surface should also be treated with anti-corrosion, anti-rust and anti-oxidation. In this way, there will be no signs of paint falling off after being exposed to the wind and sun on the balcony, and the structure is relatively strong and not prone to deformation.

In addition, the shower room is installed on the balcony. We will most worry about water will flow everywhere. This shower room has a overflow channel and magnetic tape, which can lock the water in all directions. Don't need to worry about getting the living room wet.

Kitchen Design

When designing a functional kitchen, the rule of triangles should be kept in mind. That is, the sink, stove and refrigerator are arranged in a triangle. The L-shaped kitchen fits this triangle shape very well. The L-shaped layout is most suitable for small and medium-sized kitchens. The first-class kitchen is not only about the layout, but also about creating delicious food through the inspiration of the right layout.

1. Industrial style kitchen design.

 

2. This sweet gray kitchen is equipped with golden cabinet handles and natural wood fittings. The table with green leaves adds a lot of color to the small kitchen, which can maximize the dining space in an instant.

 

3. The wine glass is the focus point of this home, highlighted by the light from the strip lights in the glass cabinet.

 

4. If because of space reasons, wall cabinets cannot be customized. An open kitchen can be realized by gradually narrowing the cabinet width.

 

5. Design a peninsula in the center of the kitchen by extending the cabinets.

 

6. Here is not only an L-shaped cabinet, but also a floor of the same shape.

 

7. Choose white locker. And choose blue floor cabinets and wall cabinets to break the appearance of one color and long layout.

 

8. If the kitchen has a window facing the outside, the kitchen sink can be located in front of the window, just like this green kitchen.

 

9. In this black kitchen, the ceiling extension is also black and equipped with spotlights. The accessory materials on the ceiling add color to the layout, and the two-color cabinets have unique light and dark design.

 

10. A series of pink designs and copper accessories are matched with pink blue decorations to exude perfect contrast and warmth.

 

11. The golden honey color and black bring the perfect color combination to the light gray and white kitchen.

 

12. The golden faucet, silver oven, copper vases and candle holders add highlights to the white kitchen.

 

13. You can merge two separate rooms together, like this kitchen with a washing machine.

 

14. The floor cabinets and wall cabinets are right-angled and uniquely arranged.

 

15. Use two rows of wall cabinets of different depths to break the rigid arrangement of parallel double rows.

 

16. L-shaped wall cabinet with recessed lighting. Create a unique kitchen layout through a series of different color combinations.

The kitchen sink is a kitchen ware that every family must have. Because the sink is used most frequently in the kitchen, the kitchen sink must be installed carefully in order to avoid some troubles when using the sink later.

The installation of the kitchen sink is not a major project, but you must pay attention to the details. If you want to rework, it will involve cabinets and countertops, and the workload is huge.

When the kitchen sink is actually installed, although it can be placed in the final process of the kitchen, it needs to be considered when designing the cabinets at the beginning. The cabinet design should leave a space for the sink, at least to ensure that the sink can be installed. Also, when making the countertop, an approximate size of the sink must be provided to facilitate the opening of the countertop. Of course, it is best to have a specific drawing size. Then tell the workers who make the countertops, which way you want to install the sink, above counter, farmhouse, or under counter? Because the hole size of each installation method is a little different.

The following introduces some basic processes and details of the kitchen sink installation, so that you can know what should be paid attention to when checking.

1) When the sink is installed, the faucet and the water pipe are usually installed at the same time. The current faucets are generally hot and cold, so you have to connect the hot and cold water pipes, and don't get confused.

2) After the faucet is installed, connect the drain set. The overflow hole pipe and the downhole pipe are directly connected. If you need to connect the waste water pipe of the dishwasher or water purifier, you can first connect a tee to the drain pipe of the sink. All joints must be kept tightly sealed, otherwise there will be problems such as water leakage and water seepage.

3) If the sink is equipped with an installation buckle, it is necessary to fasten the installation buckle to prevent displacement and unevenness of the sink.

4) After the sink is installed, a leak and drainage test should be done. The method of testing is to fill the sink with water and see if there is any leak in the tank. Because the quality of some sinks is not good enough, there will be blisters, cracks and other reasons on the finished product that cause the sink to leak. If there is no leak, open the drain and let the sink perform a drain test. When draining, pay attention to whether there is water leakage at each interface of the sewer pipe, whether the tank drains smoothly, and whether there are too many residual water marks.

5) After doing a series of tests, if there is no problem, the edges around the sink can be sealed. Applying waterproof glue, and doing some beautification work in the follow-up. Now we have basically completed the entire installation of the sink.

During the entire installation process of the sink, the most important thing is to pay attention to the tightness. Pay attention to the contact position of the sink and the countertop or the junction of the water pipe. So as not to cause water leakage. After the sink is installed, most houses are still in the process of renovation. So keep the sink tidy and clean, and try not to expose it. Too much dust and debris will fall in the sink during decoration. If it is not cleaned up in time for a long time, it may cause problems such as watermarks and rust in the sink.

So after installing the sink, clean the sink, try to wipe off the water stains, and then cover it with a plastic cloth. When you check in later, you can open it and clean it up again. Basically, it can avoid watermarks and rust in the sink after moving in.

Product Diversification

At present, the concept of sanitary ware products has far exceeded the traditional concepts of the past. As a symbol of modern and luxurious life, it has entered all aspects of people's lives. That is, it not only has sanitation and cleaning functions, but also includes health care functions, visual enjoyment, and entertainment functions. The shape of sanitary ware products has appeared in one-piece type, basin series, bidet, or table-top series, etc. In recent years, sanitary ware products have also launched a series of complementary products with additional functions such as leisurely bathtubs, cabinet basins, and steam shower rooms. Therefore, in the future, it is self-evident that the sanitary ware market will show a diversified development trend.

Build A Complete Accessory Manufacturing Base

Now due to the increase and enrichment of new functions of sanitary ware products, the sanitary ware production of developed countries has been involved in a large number of accessories.

Therefore, a mature sanitary ware industry should be supported by more varieties of accessories and additional products. For example, the production of raw materials, glazes, pigments, models, machining, instruments, meters, copper work, and packaging and decoration materials that are closely connected with many sanitary ware production systems should be incorporated into the entire production system as soon as possible. The sanitary ware production industry in China urgently needs to form a complete industry group and supporting group related to sanitary ceramic production, and form a processing base for various related accessories that are compatible with the end products.

The Comprehensive Functions of The Product Are More Prominent

According to the shopping psychology of consumers in the international market, a good sanitary ware product must be able to satisfy a modern lifestyle and have a relatively complete set of functions. For example, in addition to satisfying the use function, it also needs to solve multiple functions such as water saving, energy saving, environmental protection, comfort, health care, anti-aging, and intelligent induction, and has obvious recyclability and a strong concept of green consumption. This requires a new generation of products that must be able to make full use of comprehensive high-tech achievements such as biotechnology, electronic technology, and induction technology to combine various new functions to improve the comprehensive functions and physical quality of sanitary ceramic products.

Rich Decorative Colors

In the past, sanitary ware products were often decorated with white glaze to show their white jade-like appearance. But the cool tone of its color makes many people feel uncomfortable. Nowadays, it is generally recognized that various opalescent white glazes are mainly used for the appearance of products with other colors and shades. China sanitary ware factories should use the coordination of various glazes to create a variety of popular new decorative colors. The changing rhythm of sanitary ware products, just like the promotion of popular colors in major international clothing exhibitions in the world every year, shows the visual function of leading new trends in colors from time to time. With the continuous updating of people's aesthetic perspectives and the rapid changes in domestic and foreign market demands, it is necessary to accelerate the development of a new generation of glaze decoration varieties and strengthen the new color decoration of products.

 

In short, China sanitary ware factories must continuously improve the technical content of export products, and continue to improve the grade and added value of export products. Continuously develop a new generation of new high-end products to meet the needs of domestic and foreign markets. It is conducive to entering the international high-end market. It is believed that China sanitary ware factories will become stronger.

For a more useful and faster-drying bathroom, toilet, shower, and washbasin must be separated.

The toilet, washbasin, and shower located in three areas allows people to use them separately.

 

This design has more advantages. 

1. Dry area always being dry.

Using a three-separated bathroom, when the shower is completely independent, the sink and toilet area will not be affected by the shower. Cleaning is also more convenient.

 

2. More people can use the bathroom at the same time.

In the morning some want to use the toilet and some want to brush their teeth. If there is no separation, as long as one person enters, the whole family will have to wait.

However, with the three-separated bathroom, everyone can save time and use separately.

 

Three-separated Bathroom Layout

If the bathroom is a long and narrow shape, it is recommended that the toilet, washbasin, and shower are arranged in a row.

Usually the most frequently used washbasin will be placed in the middle, so you can come in and use it at any time. To the left and right are the shower area and toilet.

The toilet and the shower area can also be arranged on the same side, and the washbasin is placed on the opposite side to form a T-shaped arrangement. Hotels often use this layout, which is relatively confidential, but does not waste space.

 

If you want to add a bathtub, because the bathtub is used less frequently, it is usually placed in the corner next to the washbasin.

 

But to be honest, the three-separated bathroom requires a relatively large area. The partition wall will be added, and the distance between the shower, toilet and washbasin will be increased. If three separations are used, it is bound to reduce the size of other spaces.

 

Design and Construction Considerations

1. The minimum shower area wide is 90cm.

The shower area should be kept wide enough for the person to turn around, and hands should not touch the wall easily when showering. It is convenient to have a width of at least 90 cm.

 

2. The toilet area is at least 70cm wide.

If you don't want it too narrow when going to the toilet, the wall should not be too close. Starting from the center of the toilet, leave a width of 35 cm or more to the left and right to make it easy to use.

The human action is to turn around and sit down on the toilet, so 60 cm of moving space is required in front of the toilet.

 

3. If the toilet is adjacent to the shower area, the water pipe is easy to install.

When the toilet and the shower area are adjacent to each other back to back, the pipeline can be hidden in the partition between the two, and the distance of the pipeline can be shortened.

 

4. There is no need to install a floor drain in the toilet and washing area.

Since the three-separated bathroom has completely separated the toilet, washbasin and shower, and now fewer people will flush the floor. Therefore, it is only necessary to install a floor drain in the shower room. Blocking with waterproof strips can ensure that the toilet and washbasin area remain dry. For floor cleaning in dry areas, it is recommended to wipe with a mop.

 

5. Reduce the area of waterproof coating.

Ordinary bathrooms are usually recommended to do waterproof layer on the walls and floors of the whole room due to the spread of moisture. However, in the three-separated bathroom, there will be no excess water vapor in the toilet and washbasin area. It is recommended to do waterproof only half-height walls.

 

Then we take a look at the examples of the three-separation bathroom.

 

U-shaped Layout

This is a typical hotel bathroom layout. The sink is in the center, and the toilet, shower area, and bathtub are placed on both sides, forming a U-shaped layout. Suitable for use in large-area bathrooms.

 

The doors of the shower room and toilet area are designed with metal mesh, which is ventilated and can be cleverly hidden.

 

The walls and floors of the whole room are paved with the same marble. With metal accessories, the overall style is particularly high-end.

 

One-line Layout

With the double washbasin design, two people wash at the same time without being crowded. With double-sided mirrors and wall lights on both sides, it forms a balanced and symmetrical design.

 

The retro tile floor, the decorative pillars on both sides of the countertop, the delicate and elegant chandeliers, the natural and romantic simple European style.

Off-white is selected as the main color of the space, matched with earth-colored walls. The calm atmosphere makes the bathing space more comfortable and relaxing.

 

If you don't make a door, just use cement partition to separate the shower area or toilet, which can reduce the visual barrier.

A sliding door is used between the shower area and the bathtub, which can be ventilated at any time and can achieve the effect of privacy.

Two-line Layout

The washbasin area is in a single row. Since it is isolated from the shower area, it is relatively dry. The dressing storage is also set together, making it easier to use.

The wash area is in line with the toilet area. The bathtub is next to the shower area. Effectively separate the dry and wet areas. At the same time, hooks are installed on the wall for the towels and bathrobes.

 

If the bathroom does not have a window, you may wish to use colors and lights to brighten it up. The orange half-wall design makes the space bright and vibrant. Place some flowers and plants to make it more vibrant.

The wall is made of cement gray, so even if water drops splash off, it will not leave a trace. The mirror cabinet on the top can effectively increase the storage capacity.

 

In order to leave the central aisle, move the sink outside. Arranging the shower area and the toilet back to back not only effectively shortens the length of the water pipe, but also makes the design more concise.

In a typical T-shaped layout, the shower area and toilet are hidden behind the washbasin to maintain privacy. The wash area divides the bathroom into two parts.

 

The entrance of the bathroom is designed with arches, and the retro red bricks are more antique. The tiled floor extends to the left and right.

 

After reading the above cases, do you think it is good-looking and practical?

 

Thanks for viewing our website. Hopefully you can find your interested items. Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business. We are one-stop supplier of bathroom and kitchen products.

Sanitary ware is a must-have for household life. With the improvement of people's living standards, the market has been expanding. And after years of development, China's sanitary ware output has become the world's largest.

Competition in the low-end market is fierce. And difficult to enter the high-end market.

In recent years, China's sanitary ware market has been in a state of rapid development.

However, most sanitary ware companies have not been able to keep up with the pace of development, and management and marketing have not been standardized. The quality of employees is not high. Only a few companies have operated some well-known brands and opened up channels. This leads to vicious competition between enterprises and the market is occupied by a very small number of large and well-known enterprises.

 

The disadvantages of small sanitary ware companies are even more obvious: small scale, single product, outdated equipment... seriously lacking in competitiveness.

And several large foreign brands not only control the high-end market, but also become more and more competitive in price. They are gradually penetrating into the low-end market, which is an unprecedented test for small and medium sanitary ware companies.

 

Secondly, various costs such as materials and labor are rising. The rising cost puts more and more pressure on sanitary ware companies. In the face of many competitors, they have to increase advertising investment. By compressing their own profit margins, try to gain customers and open up sales.

For sanitary ware companies, especially small and medium-sized enterprises, it is tantamount to worsening the situation.

Some people say that the Chinese sanitary ware market is "handed over" by the Chinese themselves.

Only by occupying the high-end market, the enterprises can have a position; on the contrary, the smaller the share, the lower the position.

 

It is understood that China has become the world's largest bathroom consumer market. The performance and quality of many domestic sanitary ware brands have reached or even surpassed that of foreign brands. However, foreign sanitary ware brands have almost monopolized China's high-end sanitary ware market with their strong financial strength and high brand awareness.

In addition to historical reasons, the lack of brand awareness of domestic companies is an important reason for this situation.

Sanitary ware has been continuously developed and improved. More and more consumers not only pay attention to product price, quality, and after-sales service when buying sanitary products, but also pay attention to brand awareness and business reputation.

 

If the company still stays in the business philosophy of the seller's market in the past, it will definitely be at a disadvantage in market competition, and even be ruthlessly eliminated by the market. The sanitary ware industry has entered the era of brand marketing.

 

Liberate the shackles and keep up with the times

According to statistics, China's annual demand for ceramic sanitary products has reached 34 million pieces. It has become the world's largest consumer market for sanitary products. Last year, the output of ceramic tiles and sanitary ware products reached 7.5 billion square meters and 177 million pieces respectively. They account for 60% and more than 40% of the world's total output of architectural sanitary ceramics. The annual growth rate of products exported to Europe, the United States, Japan, South Korea, the Middle East and other places is 50%.

From the analysis of this trend, the Chinese sanitary ware market is quite optimistic. With a large amount of rigid demand, it can be said that the market is very good.

 

However, due to the comprehensive factors such as rising raw material prices, rising labor costs, and continuous floods and droughts this year, the domestic ceramic industry is in a downturn.

In response to the frequent occurrence of "overcapacity" and "market saturation" in the industry, the profit margins of small and medium-sized bathroom companies will be further compressed. More and more rational consumers do not intend to pay for it. The pressure of product backlog is considerable, and some Chinese factories have to stop running some production lines.

 

The ceramic sanitary ware industry is still very traditional in terms of management and marketing. Employees lack technical expertise. Therefore, only a very small number of companies have relatively well-known brands and relatively complete sales channels.

Many companies' own sales channels and sales management are obviously not standardized enough, and marketing is weak. The sales of products depend on a good relationship with distributors.

 

In addition, many companies do not have the ability to operate brands, a systematic business model and a professional marketing team; no accurate market information; no customer-oriented service standards and customer-oriented service system; no market-oriented research and development, production, and supply system. The capital investment cycle is long and the risk is high. All of these will become a time bomb that puts enterprises at high risk, and may be deadly at any time.

In summary, it is not difficult to see that an enterprise's internal operation management system urgently needs to be established, and market standards urgently need to be standardized. In addition, companies can stop running part of the production line, digest inventory, and wait for the peak sales season. Because there is real rigid demand, as long as the product is done well, no matter how the market environment changes, a certain effect will eventually be achieved.

 

The following are three suggestions for improving the status.

 

Keep Up with Quality

At any time, the quality is everything and will not lag behind. Consumers who spend money on goods, especially a household product, will certainly not tolerate quality problems. Update production equipment and other infrastructure. Although the cost is high, if you don't invest, it's just waiting to die.

 

Sales Channel Expansion

In the past, the marketing of sanitary ware companies relied on good customer relationships to a large extent. Lacking the ability to operate the brand; there is no standard customer service system and professional marketing team. These all increase the profit risk of sanitary ware companies invisibly. This is also an important reason why many sanitary ware companies say that "the product is good, but it can't be sold."

 

Keep Up with Service

Compared with methods such as updating equipment and adding stores, the investment in service quality improvement is much lower than the previous two. Moreover, there are more and more high-quality sanitary products in China. Whether to develop high-quality, considerate and personalized services to bring customers a better service experience has become most important for the product to stand out.

Ceramic sink is a kind of household goods. There are many kinds of sink materials, such as cast iron enamel, ceramics,

steel plate enamel, artificial stone, acrylic, crystal stone flume, etc. Most bathroom sinks are made from firecaly.

Ceramic sink is a kind of water sink which is made by integrated molding and firing. Its main body is mainly white.

It has the advantages of high temperature resistance, easy cleaning and aging resistance. 

It can be wiped clean with cloth or clean metal ball in daily cleaning.

Step Ⅰ. Grouting

The production of ceramic sink is generally made by grouting.

The slurry is poured into a fixed die and allowed to solidify.

Step Ⅱ. Spraying Glaze

Step Ⅲ. Forming

Step Ⅳ. Preparation for Furnace

Step Ⅴ. Burning

Put the products on the kiln car according to certain proportion. 

Step Ⅵ. Storage & Logistic

Pot Filler Faucet Deck Mounted with Extension Shank, Solid Brass Folding Kitchen Sink Faucet, Brushed Nickel Brand: Lafayal 2 ratings

Black Nano Topmount Handmade Kitchen Sink Double Bowl Stainless Steel Sink Reference …

27/11/2022· Kraus KHU100-30 Kitchen Sink, 30 Inch,... Check Amazon Price Kraus KHU100-30 is the best stainless-steel kitchen. Its sturdy construction and elegance make it handy for any home. This easy-to-clean, long-lasting stainless steel sink is great for small or large houses. Kraus has been producing home products for over ten years.

Ceramic Bathroom Sinks BMU-N1714 Ceramic Kitchen Sinks PK-S011 PK-S012 PK-S031 PK-S033 PK-S032 Our Factory Xiamen Boma International Trade Co., Ltd., established in 2005, is an international enterprise focusing on research and development, design, production, sales, and supply chain integration of kitchen and bath ceramic sinks.

Kaiping Factory Chrome Finish Brass Single Handle Hot Cold Water Basin Faucet with cUPC Certificate

Elkay DSESR127221 Dayton Single Bowl Dual Mount Stainless Steel Sink 249

Widely Used Easy To Install Bathroom Shower Curtain Rods Tension Curtain Rod For Balcony , Find Complete Details about Widely Used Easy To Install Bathroom Shower Curtain Rods …

Extra deep Bowl to hold large items. Easy to clean