Some faucets are used two or three years, and the water flow is intermittent or rusted into green. The handle is hard to be used for opening and closing. The size of the water flow depends on luck.
Some faucets have been used for 20 years, and the surface is still as smooth as new. The feel when adjusting the angle of the handle is still as silky as the chopsticks in a honey jar. The speed of the water flow are still adjusted as you like. So how can we pick a faucet that can last 20 or 30 years or more?
First, the kitchen faucet can be rotated 360°.
For ease of use, the kitchen faucet should be taller, and the spout should also be very long. It is best to extend above the drain and not splash water. If there is a hot water line in the kitchen, this type of faucet should also contain hot and cold hoses. In order to meet various needs, most of the kitchen faucets can rotate the body of the faucet left and right. The sprayer part of some faucet can be pulled out, which is convenient for cleaning to all corners of the sink.
Second, if the budget is enough, the material of stainless steel is preferred.
The material of kitchen faucet is generally brass, which is the most common faucet on the market. However. Due to the characteristics of the kitchen environment, pure brass faucets are not necessarily the best choice. All pure brass faucets have electroplating on the outermost layer, and the function of electroplating is to prevent corrosion and rust of the brass inside. There is a lot of oily smoke in the kitchen, and the greasy hands and cleaners on the hands when washing the dishes make it often necessary to clean the faucet. If you do not use the correct way to clean, it is likely to damage the electroplating layer of the faucet, causing the faucet to be corroded and rusted. If you want to choose an all-brass kitchen faucet, you must be sure to have excellent electroplating, otherwise it will easily cause the faucet to rust and corrode.
And now some manufacturers use high-quality 304 stainless steel to make faucets. Compared with pure brass faucets, faucets made of high-quality stainless steel are free of lead, acid, alkali, corrosion, and harmful substances, and will not pollute tap water. This is very important for drinking water in the kitchen; and the stainless steel faucet does not need electroplating, it is extremely difficult to rust, and the hardness and toughness are more than twice higher than that of brass products, so it is very convenient to clean. However, due to the high difficulty of stainless steel processing, the current high-quality stainless steel faucets are usually relatively expensive.
Third, pay attention to whether the length of the tap can clean the sinks on both sides.
When buying, pay attention to the length of the basin and the faucet sprayer. If it is a double sink, pay attention to whether the length of the faucet can clean the sinks on both sides when rotating. Most kitchen faucets can rotate the body of the faucet left and right, which is convenient for cleaning to all corners of the sink.
How to choose bathroom accessories set?
1. Style matching: pay attention to matching with the overall decoration style of the bathroom.
2. The bathroom hardware should be purchased as a set, which is cheaper than the single purchase. One set of bathroom accessories with unified design of the series is more complete and stylish. Avoid mismatching.
3. The material is preferably stainless steel, and the surface is chrome-plated. The biggest advantage of stainless steel material is strong stability, high density, heavy weight, high ductility and plasticity. And it can be designed in various shapes. It is plated with a layer of metallic chromium, which is bright, waterproof and rust-proof.
4. Pay attention to these details when choosing.
Surface plating determines if towel racks can last forever. Generally speaking, the brighter and finer the surface, the more uniform the color, and the better the mirror effect, the better the coating quality.
Pay attention to the material of the base. The material of the base determines the strength of the load-bearing capacity. Most manufacturers use zinc alloy materials. If it is stainless steel, it depends on which standard stainless steel is used.
Good bathroom accessories have flawless appearance. Touch can make a certain judgment on the product quality. Smooth touch without burrs is good surface treatment performance. Pay special attention to corners, welding positions, etc.
Guangdong sanitary ware production area: all kinds of sanitary products.
Guangdong's production areas are mainly concentrated in Foshan, Kaiping, Zhongshan, Chaozhou. It is the region with the most complete domestic bathroom industry chain, the most enterprises, and the most well-known brands. Guangdong sanitary ware production area includes all kinds of sanitary products, including ceramic sanitary ware, hard sanitary ware, etc. At present, no production area can compare with Guangdong in terms of industrial intensification. Aquacubic’s two production sites are located in Foshan, Guangdong.
Tangshan sanitary ware production area: mainly ceramic sanitary ware.
Tangshan ceramics has a long history. It is the main ceramic producing area in China. At present, Tangshan has been recognized as "Hebei Province Ceramic Products (Tangshan) Export Base", "China Building Material Export Base" and "National Foreign Trade Transformation and Upgrade Professional Demonstration Base".
Nan'an sanitary ware production area: mainly hardware plumbing.
Nan'an, the hometown of water heating in China, is centered on Luncang Town, the "Hometown of Water Heating in China", and Yingdu Town, "China's Water Heating Valve Base Town". Nan'an people's supply and marketing forces spread all over the country, occupying more than 70% of the country's plumbing valve market sales.
Zhejiang sanitary ware production area: mainly hard sanitary ware.
At present, Zhejiang sanitary ware industry has formed economic development sectors such as Hangzhou leisure sanitary ware base, Jiaxing Pinghu sanitary ware base, Wenzhou plumbing equipment production base, Taizhou sanitary ware base, Ningbo plumbing equipment and sanitary fittings production base.
Changge sanitary ware production area: mainly ceramic sanitary ware.
In November 2009, the China Building and Sanitary Ceramics Association officially awarded Changge City the title of "Central China Sanitary Ware Industry Base", marking the first national sanitary ware industry base to settle in Changge, Henan.
Chinese manufacturers have mastered the design, research and development, production, sales and service of sanitary products, opening up the entire industrial chain. As China enters the era of quality, more and more consumers are willing to pay for quality, and the quality of products in the sanitary ware market will be even more improved.
This article introduces the three main components of the faucet. It will help you to understand the quality and material of faucets we use everyday. Uncover all the mysteries of the faucet.
Part 1: Composition
The three most basic components of a faucet: main body, plating and cartridge.
01 Main Body
The main body is the torso part of the faucet. The water flows in and out of the main body all the time. So the material is important. It determines the water quality.
Copper Alloy Faucet
Copper alloy is currently recognized as the most suitable main material for home use faucet, and the mainstream is brass. On the one hand, copper has good machinability, fluidity and formability. On the other hand, because copper ions have a bactericidal effect, they can kill super bacteria such as MRSA within 30 minutes and prevent the bacteria from producing antibodies. The inner wall of the copper faucet will not breed bacteria and become the most suitable carrier for "water".
According to different proportions of copper content in copper alloys, copper alloy materials can be divided into 52, 55, 59 and 62 copper. Among them, 59 copper is the best. The content of copper metal is 58%-60%, the content of lead metal is 0.08%-0.2%, and the content of other elements is about 2%. The remaining metal is basically zinc.
Because lead metal will precipitate when water enters the faucet, it will pollute the water. If the lead content is too high, it is harmful to the human body. Therefore, some brand faucets use low-lead copper, that is, the lead content is less than 0.1%. In view of the fact that it is difficult for general consumers to judge the lead content, it is recommended to choose a faucet with a clear mark that uses low-lead copper.
Zinc Alloy Faucet
Zinc alloy is an alloy based on zinc and added with other elements such as aluminum, copper, magnesium, cadmium, lead, and titanium. Zinc alloy is easily corroded in water. After being corroded, the metal will be mixed into the water and cause harm to the human body. The biggest advantage is probably the low price.
Stainless Steel Faucet
The main components of steel are iron and carbon. Ordinary carbon steel is easy to rust. Adding chromium, nickel and other metals to carbon steel can make the steel corrosion resistant. Therefore, the most important factor affecting the corrosion resistance of stainless steel is the content of chromium.
Stainless steel has the advantages of acid resistance, alkali resistance, corrosion resistance, and no release of harmful substances (lead). But compared with copper, it has one of the biggest drawbacks, that is, it does not have antibacterial function.
If the budget is sufficient, choose low-lead copper faucets. If you can't identify whether it is low-lead copper, choose a product from a big brand.
If you have a small budget, you can choose stainless steel faucets. The price will be cheaper. However, relatively there will be some problems. In particular, we must choose products from high standard manufacturers. After all, it's about your own health, don't be greedy for cheap.
The faucet is used in a humid environment, and its surface requires a good finish. The common surface treatment method on the market is electroplating, mainly including chrome plating, nickel plating, titanium plating and so on. In addition, there are some rarer methods such as baking varnish, porcelain, and imitation gold electrophoretic paint.
Chrome plating is the most common faucet plating. Chromium is a white metal with a bluish color, which has high hardness and wear resistance. Its hardness exceeds even the hardest quenched steel, second only to diamond.
Chromium is not easy to change in a humid environment and can maintain the surface gloss for a long time. With a silver appearance, chrome-plated faucets are more popular with consumers.
Nickel can quickly form a very thin passivation film on the surface of the faucet. Can resist the corrosion of water vapor and certain acids. Has excellent corrosion resistance and stability. Can resist the corrosion of water vapor and certain acids. Therefore, the stability of the nickel layer in a humid environment is very high.
Titanium alloys are made by adding aluminum and tin elements or aluminum and vanadium elements to titanium. Electroplated titanium gold has the advantages of high strength, low density, strong toughness and good corrosion resistance. The surface of the titanium-plated faucet is as smooth as a mirror. Its golden luster looks elegant and rich, and very decorative. However, the process of plating titanium gold is complicated. It is very easy to absorb impurities during thermal processing. Therefore, the yield is low. The cost is also higher.
Baking varnish is to put two layers of coating on the faucet. Each time the paint is applied, it is sent to a dust-free constant temperature baking paint room for electric heating or far-infrared high temperature baking.
The surface of the baking varnish faucet is smooth and shiny, which can present a visual texture similar to that of a piano, making the whole product look very high-grade. However, compared with other surface treatment methods, baking varnish faucets are more prone to surface peeling. The durability is not as good as the traditional chrome-plated faucet. This method is not widely used.
This treatment will make the surface of the faucet visually rough. However, it is quite delicate to the touch, showing a restrained beauty. The brushed process mainly relies on mechanical friction to produce several common textures such as straight lines, chaotic lines, threads, corrugations, swirling lines and intermittent silk lines on the surface of the faucet. It can also create matte, mirror, three-dimensional, embossed, satin and other effects.
Appropriate surface treatment can make the overall shape of the faucet rich and full. Choosing the right faucet can also become the finishing touch to the bathroom decoration. It is pleasing to the eye.
There are generally multiple layers of plating. There are also some cheap faucets that are only coated one layer. The coating is not as thick as possible, but just right. If the coating is too thin, it will not be able to prevent corrosion. If the coating is too thick, it is easy to peel off. Copper + nickel + chromium is best. Copper can provide excellent adhesion. Nickel makes the coating have excellent corrosion resistance. Chromium makes the surface bright and flawless, and it is hard and scratch-resistant. Further improving the corrosion resistance. In addition, the faucet that has passed the 48-hour professional salt spray test will be more guaranteed in terms of corrosion resistance. Aquacubic's products have passed these tests.
The cartridge is a part that realizes the basic functions of direction control, pressure control or flow control by means of the rotation of the valve stem. The water flow enters the main body of the faucet through the cartridge and finally leaves the water outlet. The faucet used at home is turned on and off countless times a day. It can be seen that the quality of the cartridge is also very important to the faucet.
The ceramic cartridge has less water pollution, good wear resistance and good sealing performance. Many high-quality faucets use ceramic cartridges. The ceramic chip must have good airtightness, stable physical properties, wear resistance, and long service life.
Stainless Steel Cartridge
The biggest advantage of the stainless steel cartridge is that it has a larger adjustable angle of rotation and is not easily affected by water quality. It is more practical to choose this type in areas with poor water quality. However, stainless steel has worse wear resistance compared to ceramic. After it is used for a long time, water leakage is prone to occur.
Roller cartridges are old-fashioned cartridges. No matter in terms of price, water pollution or life span, they are inferior to ceramics and have been phased out. There are very few roller cartridge faucets on the market.
Part 2: How to Buy ?
After understanding the most important parts of the faucet, let's take a look at the precautions when purchasing.
01 The Weight
Faucets made of brass are heavier. So you can make a preliminary judgment by weighing the faucet. However, many manufacturers can increase the weight of low-quality faucets through some methods. So here is a commonplace saying, for consumers who can't distinguish the material, it is better to choose the leading brands. This is the simplest selection method.
02 The Surface
In sufficient light, carefully observe the electroplated surface of the faucet. Good electroplating looks as bright as a mirror, without any oxidation spots and burn marks, no pores, no blistering, no plating leakage, no burrs to the touch. After pressing the faucet, the fingerprints will spread out quickly, and it is not easy to adhere to dirt.
Breathing out the surface of the faucet. For products with good electroplating quality, the water vapor will quickly and evenly fade away. If the quality is not good, the fading speed will be slower, or not fade. The faster and more even the water vapor fades, the better the quality.
03 After-sales Service
The after-sales service of the product is very important, and it is also the guarantee for you to have no worries. Be sure to buy products with good after-sales service. The general faucet is guaranteed for at least 5 years.
When choosing a faucet, the most important thing is to look at the material, plating and cartridge of the faucet. Because the material determines the safety of the water. The coating can increase the service life of the faucet, so that the faucet has scratch resistance, corrosion resistance, and the surface brightness will be better. The cartridge is the heart of the faucet. Generally high quality faucets use ceramic cartridges. It has the characteristics of strong wear resistance and good sealing performance.
In addition to the practicality of the apartment renovation, we also pay attention to its beauty. For example, choose wall-mounted toilets and washbasins; choose concealed baseboards; hide all the pipes; improve the overall aesthetics!
Concealed showers are more beautiful than exposed showers.
There are mainly the following 3 ways to install the shower:
1) Exposed installation: the water inlet pipe and mixing valve of the shower are exposed outside, which is not beautiful enough;
2) Concealed pipe installation: The inlet pipe is buried in the wall and the mixing valve is outside. This is most commonly used method;
3) Concealed installation: Completely opposite to the first type, the inlet pipe and the return valve are installed inside the wall. Leaving only the switch and the water outlet outside. Although it is beautiful, the process is complicated.
For concealed showers, there are also two different styles:
1) Top sprayer and hand shower
Look at the picture, the top shower head is matched with a hand-held shower head at the bottom. In this way, you need to determine the size of the shower head before renovation. And do the drilling and wiring layout. In terms of installation, this method is relatively simple.
2) With additional side spray
This is based on the former, plus a side spray function. During renovation, pre-installed in-wall boxes and multiple valve cores are required to match the water outlet. You can imagine how complicated this approach is! How to install it? Look down.
First determine the number of side nozzles (usually 2-6); the in-wall installed valve core has multiple outlet connection ports, from the valve core to the main water inlet, other outlets, top spray showers and hand showers; Secondly, cement leveling is required between the valve core and the wall, and in-wall installed parts are also used to stabilize; then leveling, waterproofing and pressing are performed to see if there is any leakage; the last step is to sticking ceramic tiles.
Compared with the exposed installation, the appearance of the concealed shower is certainly more attractive. However, the maintenance is complicated and cannot be ignored. The water pipe fittings of the exposed shower are all on the outside. If the concealed shower needs to be repaired, we can only break the wall! But if you choose a good quality shower, except for the water pipe problem, you don't need to break the wall under normal circumstances.
If you really like the appearance, it is not a big problem to choose a concealed shower. But if you are still worried about renovation and later maintenance, it is recommended not to try it.
Shower Purchase Skills
1. When choosing a shower, try to make the shower tilted (to see the water effect). If the top spray holes are obviously small or there is no water at all, it shows that the internal design of the shower is very low. It is impossible for the user to have a comfortable experience.
2. Look at the coating and valve core. Under normal circumstances, the brighter and more delicate the surface of the shower, the better the coating process. The high-quality shower uses high-quality ceramic valve core, which has high hardness and wear resistance, and is not easy to drip. The rotating adjustment handle is also very smooth.
3. Everyone knows that if the shower is used for a long time, there will be scale and impurities deposits, which will block the water outlet. If the mesh cover cannot be cleaned, the shower will not discharge water normally; in order to avoid the blockage of the water outlet due to poor water quality. All the shower nozzles should stick out for easy cleaning.
4. Shower accessories will directly affect the comfort of our shower. This cannot be ignored. For example, whether the lifting rod of the shower is flexible. Whether the shower joint is equipped with anti-twist ball bearings. Whether there is a rotation controller on the lifting rod, etc.
5. The water-saving function of the shower is the key point to be considered when purchasing the shower. Some showers use a steel ball valve core, and are equipped with a hot water controller, which can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. This type of shower with a reasonable design saves 50% of water compared to ordinary showers.
1. Do a good job of cleaning up during installation, especially the valve core. During the decoration, it is inevitable that decoration dust or even large particles of impurities enter the water supply pipe. If it is not cleaned up, these impurity particles will enter the valve core of the shower faucet, easily causing blockage or even destroying the internal structure of the valve core. If the shower has little water output, it is very likely that the cleaning work is not in place.
2. To ensure safety, equipotential terminals are indispensable.
An electric shock prevention system is indispensable in the bathroom: equipotential terminal. After all, compared with other spaces, the bathroom is accompanied by water all the year round, and the risk is relatively high. Connect with the equipotential terminal to prevent leakage, electric shock, and avoid dangerous situations.
There are a large number of shower options. So everyone can try to choose different showers. Traditional showers have gradually been eliminated. We must learn to keep up with the trend in renovation project.
Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers. The products include faucets, sinks, basins,
bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.
Look forward to cooperating with you.
Thanks a lot!
In China some people say that the struggle in the big city is so hard. Why not go to work in a small town? Is it worth struggling to afford a small apartment for a lifetime? I believe many people will find it worthwhile, because in big cities there are opportunities that cannot be found in small towns. The small apartment is not terrible. We can remodel it. As long as we have a dream, everything is possible. The owner Mr. Zhang who lives in Shanghai, like most ordinary citizens, worked hard all the way from the small hometown and finally settled in Shanghai and bought an apartment of 70 square meters. After having a child, Mr. Zhang took his parents from his hometown. A family of 5 squeezed into a small apartment. There was only one bathroom. Every morning and every evening, they were faced with taking turns to line up to take a bath and wash. They had no patience after some time. So he thought about making another shower room, and he can make the most of the balcony. Looking at the balcony that costs him a lot, only used to pile debris and dry clothes, Mr. Zhang felt it was a pity. He had heard of a case of transforming a balcony into a shower room before, so he wondered why not give it a try. If it fails, it will be dismantled after all. After talking to his wife, Mr. Zhang started serious research. After careful study, he summarized the following points to note:
First of all, it must be waterproof. Due to the special location of the balcony, the back may be the living room or bedroom. Considering that moisture may cause mold and peeling on the back wall, it is recommended that the waterproof layer of the wall where the shower is installed is painted as high as possible. The waterproof coating is generally brushed 2~3 times.
Second, make sure that the ground has a slope. The ground also needs to be waterproofed, and it is also necessary to ensure that the ground has a certain slope so that the sewage from the bath is discharged to the drain and will not flow back to the living room or other places.
Third, strengthen heat preservation. There is a big difference between the balcony shower room and the indoor shower room. Generally, the indoor shower room has only one wall with windows, and it can be kept warm by installing a heating system.
Finally, pay attention to the issue of privacy.
After studying how to install it, the next step is to choose a good shower room. Which products can meet this special demand? Because the balcony shower room is unavoidable from the wind and sun, we must pay attention to its material and anti-rust, anti-corrosion, and anti-fading ability. At the same time, pay attention to whether the frame is strong and stable, and the wall of the shower room must be strong.
After comparison, Mr. Zhang finally chose this shower room. This shower room is based on apartment space. The large apartment frame glass curtain wall, angular and cylindrical surfaces make the entire bathroom space richer.
At the same time, automotive-grade toughened glass has a thickness of 10MM, can withstand 700° high temperature, and has a high strength about 5 times that of ordinary glass, with outstanding impact resistance and thermal stability. In addition, EPM steel mold protection is added, so you don't have to worry about the risk of glass bursting. Even if it breaks, it will still stick to the debris to prevent the glass from splashing and hurting people. You can take a shower without restraint.
The door frame, handle and hinge outside the main body of the shower room are all made of high-quality aluminum alloy, and the surface should also be treated with anti-corrosion, anti-rust and anti-oxidation. In this way, there will be no signs of paint falling off after being exposed to the wind and sun on the balcony, and the structure is relatively strong and not prone to deformation.
In addition, the shower room is installed on the balcony. We will most worry about water will flow everywhere. This shower room has a overflow channel and magnetic tape, which can lock the water in all directions. Don't need to worry about getting the living room wet.
What kind of faucet is good?
Is it expensive? Seriously, price is one aspect of course. We must also consider these:
1. Faucet Cartridge
Cartridge is the heart of the faucet. According to the material, there are ceramic cartridges, stainless steel cartridges, and brass cartridges available on the market.
After the faucet has been used a long time, there may be a dripping problem. We may think the handle is not closed tightly or the handle is loose. In fact, the problem is often not the handle, but the cartridge hidden inside is beginning to age. The quality of the cartridge is a decisive factor affecting the service life of the faucet.
Ceramic cartridge is currently the mainstream cartridge on the market. It is wear-resistant, high-temperature and aging resistant, not easy to rust, good sealing, long service life, and less water pollution. Stainless steel and brass cartridges are also good choices. But bad brass and stainless steel materials are easy to rust, accumulate scale and affect water quality.
The Aquacubic cartridge is of higher quality than ordinary cartridges. It is made of ceramic and is integrally sealed with glue. It can adapt to various environments to ensure that the faucet will never leak under any severe conditions. It is durable, energy-saving and environmentally friendly.
2. Surface Coating
The surface coating is related to the corrosion resistance of the surface of the faucet.
In this regard, the electroplating corrosion resistance test in China is divided into 1-10 grades, and the tenth grade is the best. Aquacubic faucet can pass 24-hour acid salt spray test. The surface treatment reaches the highest tenth level. The surface should be smooth, and there is no uneven rough feeling. And it is corrosion resistant.
Of course, if you want a better coating, you can choose anti-fingerprint brushed nickel finish. Through a special process, the surface of the faucet is not easily stained with fingerprint. The best choice for cleaning enthusiasts.
3. Main Material
The main material is the main part of the water flowing through.
If the main material is not good, it will affect the quality of the water we drink! Two materials, brass and stainless steel, are more common on the market. It is worth noting that 59 brass is relatively high-quality brass material. Inferior brass may cause water pollution. Aquacubic faucet body uses 59 brass. In order to let customers use healthy water, we use low lead brass to minimize the precipitation of harmful substances in waterways and remove harmful heavy metals. Drink healthily and rest assured.
Some faucets are simple and practical, while others are decorative. Faucets can be in many different materials and shapes, such as short/high, single/double handle, stainless steel/brass, chrome/black/gold colors, etc. It can reflect the contemporary architectural decoration style. Also so many brands of faucets are available. Do you want to know the best faucet brands in China? Let's take a look at the ranking of China's top 7 faucets brands in 2020.
Moen entered the Chinese market in 1994 and established its first sales company in Waigaoqiao Free Trade Zone, Shanghai. In the following few years, American Moen company has established offices in Shanghai, Beijing, Guangzhou and Chongqing, and its sales network has covered more than 180 cities in China. In 1996, Moen set up a joint venture factory in China with global advanced production management and manufacturing technology, which shows its confidence in the Chinese market and its determination to develop in China for a long time. At the same time, all the factories in China have passed ISO9001 quality system certification and ISO14001 environmental system certification. Relying on the deep understanding of the needs of users, distributors, agents and professionals in the industry and the joint efforts of all employees, American Moen company has become one of the leading figures in China's kitchen and bathroom equipment industry, and has established a strong sales network and perfect after-sales service system. The company's business is developing rapidly, and its products are deeply loved by users.
Founded in 1990 and headquartered in Quanzhou, Fujian Province: the Economic Zone on the west side of the Taiwan Strait, Jomoo Group is a large comprehensive bathroom leading enterprise and a national high-tech enterprise integrating R and D, production, sales and service. It is also the Secretariat of "Kitchen and Bathroom Hardware Sub-technical Committee of National Hardware Standardization Technical Committee". The group's brand "JOMOO" has won many national honors such as "China's Famous Trademark", "China's Environmental Label Product Certification", and has been selected into the government green procurement list for many times.
Jomoo group headquarter covers an area of more than 1.34 square kilometre. It owns 7 subsidiaries, 4 business divisions and more than 8500 employees. Since its establishment, Jomoo group has taken "creating healthy kitchen and bathroom life, making the earth environment better" as its mission. Through continuous scientific and technological innovation, Jomoo group has made great efforts to provide customers with safe and environmental protection, resource-saving products and high-quality services, and constantly improve and enhance the quality of home life.
In 1995, Hansgrohe set up an office in Shanghai to introduce the world's top bathroom brand to China. Hansgrohe Sanitary Products (Shanghai) Co., Ltd., a wholly-owned Chinese subsidiary of Hansgrohe group. It was established in Shanghai Songjiang Industrial Zone. It is also the fourth wholly-owned factory invested by Hansgrohe abroad.
2000: Hansgrohe sponsored the publication of the Chinese version of <The History of European Bathroom Culture>, which once again shows Hansgrohe's long-standing bathroom culture.
2001: Hansgrohe celebrates its 100th birthday. Four offices have been set up in Shanghai, Beijing, Guangzhou and Chengdu; A total of 50 stores and 20 distribution points were set up, successfully occupying the high-end bathroom market; Many high-end residences and hotels use Hansgrohe products. The representative projects are Grand Hyatt Shanghai, Venice Shenzhen, Hilton Chongqing, Beijing Hotel, GE Times, etc.
Kohler, founded in 1873 and headquartered in Wisconsin, is one of the oldest and largest family businesses in the United States. Kohler is a global leader in kitchen and bathroom products, engine and power generation systems, furniture, home decoration, hotel services and first-class golf clubs.
As early as the 1930s, Kohler products had a deep relationship with China. Kohler sanitary ware was used in many famous buildings in Shanghai, such as Jinjiang Hotel and Da Guang Ming Cinema. In 1995, Kohler's China office was established in Hong Kong. Since then, Kohler has officially entered the Chinese market. In 1999, Kohler set up its headquarters in Shanghai and set up offices in Beijing, Shanghai, Guangzhou, Chengdu, Wuhan, Hangzhou, Nanjing and Shenzhen. Till today, Kohler has 10 factories, more than 500 regular exhibition halls and more than a dozen flagship stores in China.
COSO originated in Germany. Since 1993 when it came to China to create a professional sanitary ware production base, COSO has created logical and beautiful product by virtue of German industrial design concept, first-class material, ergonomics benchmark, mathematical space, rigorous manufacturing and rational beauty. COSO has won the support and recognition of the majority of consumers. After years of development, COSO has become a global leading brand of healthy sanitary ware.
In the industry, COSO products take the lead in passing ISO9001:2000 quality management system certification and EU CE certification. It has won the titles of "China Top 10 Brands of Sanitary Ware", "China Top 10 Brands of Building Materials", "China Energy Saving and Environmental Protection Promotion Products", "China Famous Brand", and "China Original Bathroom Design Award in 2007”. In 2020, the company participated in Shanghai World Expo to fully demonstrate the value and strength of the brand.
TOTO was founded in 1917. It was initially named Toyo Pottery Co., Ltd., and then renamed TOTO Co., Ltd. In 1912, TOTO set up a laboratory specializing in the research and development of sanitary ceramics (at that time, sanitary ceramics products were very common in Europe and the United States, but wooden toilets were still popular in Japan, which was in great contrast with the advanced sanitary culture in Japan today). With the wide sales of these sanitary ceramics products, TOTO used its excellent products to challenge the traditional health concept which has been accepted by the public. Till today TOTO is still working hard for it.
TOTO is a manufacturer of sanitary ware and related equipment for civil and commercial facilities. Pursuing high quality and high technology, so that users can enjoy a sanitary, healthy and comfortable life is the consistent goal.
Friedrich Grohe AG CO. KG Group is a world famous supplier and global exporter of sanitary ware products and systems. Founded in 1936, it has branch offices, 12 production plants and 17 business subsidiaries in 140 countries around the world.
It adheres to the founder's spirit of precision and high quality. Its business covers most countries and its reputation spreads all over the world. Grohe has made remarkable achievements. With the company moving towards a new global environment, the total turnover of Grohe increased to 1.5 billion CNY in 2020, and the export volume accounted for 64.3% of the group's total turnover.