folding water bucket with tap- China Suppliers Manufacturers Factory

The sink is the most important part for kitchen decoration. When cooking and washing dishes, 65% of the time is spent dealing with the sink. If you choose the wrong one and want to change, the countertops and cabinets will be changed accordingly, and you will regret it by then.

There are so many sinks, which one to choose without regret?

We summarized the advantages and disadvantages of the sink materials on the market, the experience of using single and double bowls, and the precautions for installation. Let you never make mistakes in the sink when decorating the kitchen.

 

Which is better for the sink material?

Common sink materials include stone, stainless steel, ceramics, etc.

 

Artificial Stone:

Advantages: good cleaning, seamless docking, various colors.

Disadvantages: the texture is not as hard as steel.

 

Many people say that the artificial stone large single bowl sink is easy to use. The capacity is large enough, comes with various drain racks, not afraid of scalding, and will not stain. Simply clean it for 2 minutes a day and it will be shining. If the countertop material is acrylic or quartz, it can be seamlessly connected, and there will be no annoying, moldy silica gel.

 

Granite:

Advantages: strong, scratch-resistant, wear-resistant, and high-temperature resistant.

Disadvantages: easy to scratch pots, bowls and tableware; need to clean up every day.

 

Granite is also a kind of stone, and it also has the characteristics of high hardness, wear resistance and high temperature resistance.

However, there are many disadvantages of granite. Because of its high hardness, if you drop porcelain utensils, they will break for sure.

Because it is super abrasion-resistant, to the degree of sharpening the knife, be careful when washing pots with paint on the surface. The sink can scratch the paint!

 

The stone has the characteristics of easy bleeding, especially when the sink has cracks. The colored liquid can easily penetrate into the stone. Colored liquids like soy sauce or corrosive liquids such as vinegar must not be poured into it, otherwise just wait for the dyeing later. It will cause big trouble in dish washing.

The most important point is that the stone breeds microorganisms at a super fast speed, so you have to wipe it every day like the bathtub!

 

Stainless Steel:

Advantages: anti-oil, anti-fouling, not afraid of acid and alkali, affordable, strong and flexible.

Disadvantages: prone to scratches and water stains (brushed stainless steel will be better).

 

Stainless steel has the characteristics of oil and dirt resistance, and because of its low hardness and easy processing, it has a variety of shapes. Many sinks are now integrally formed. A sink is stamped directly from one steel plate, which greatly saves production costs. Stainless steel is suitable for most families.

 

It is very important to choose a brushed matte surface, which is both dirt-resistant and wear-resistant. Imagine the water stains, handprints, and scratches left by washing dishes and pots after using the shiny polished stainless steel several times. It is simply horrible. The stainless steel sink of good quality has a uniform and fine brushed texture, and it feels very smooth, so that the oil can flow smoothly and will not remain. The inner corner of the sink should be rounded so that it will not hide dirt. To choose stainless steel, you must look for the SUS304 mark, and only the real 304 stainless steel can have quality assurance.

 

Porcelain:

Advantages: strong, acid and alkali resistant.

Disadvantages: heavier, easy to break, difficult to clean oil stains.

 

The biggest advantage of the ceramic sink is its good-looking appearance. Ceramic sinks are heavier than stainless steel sinks and lighter than stone sinks. The weight is relatively heavy, and it has an apron front, so installation is very laborious. And one of the most criticized aspects is that ceramics have a kind of adsorption ability for oil. If it is not cleaned for a while, the upper edge will become dirty. And it is also very laborious to clean.

But it's really beautiful.

 

Single Bowl or Double Bowl ?

Single bowl or double bowl, this is a topic that everyone is arguing about when choosing a sink. After reading the following analysis, you will probably know what suits you.

 

Single Bowl:

Advantages: easy to put in a large pot.

Disadvantages: ordinary faucet can not clean the entire sink(can be equipped with pull-down faucet); function is not partitioned (can be equipped with mobile sink).

 

There are so many fans for the big single bowl, because it is big and deep enough that a large wok can be stuffed. With a pull-out faucet, you can clean every corner of the sink.

Large single bowl generally refers to a bowl with a length more than 60cm and a width more than 42cm, otherwise it is a small single bowl.

 

However, a large single bowl is more suitable for a kitchen with an area larger than 4 square meters, and a small single bowl can only be selected for a kitchen with a small countertop.

Most of the sinks on the market are sold in sets. Many sink sets include accessories and gadgets. Although these accessories and gadgets are gimmicks under the guise of "giving away", they are actually added value of the sink. With them, the function of the sink can be more perfect.

 

For example, a rectangular colander can hold dishes, vegetables, etc. The drain holes are evenly distributed and can drain water quickly.

 

Some large single bowl sinks are also equipped with a hidden knife holder, which is more convenient and safe.

 

Double Bowl:

Advantages: double bowls, double functions.

Disadvantages: A single bowl is relatively small and can't hold large items.

 

Large double bowls can also hold large pots as long as the volume of the bowl is large enough. Can achieve the function of a large single bowl. The small bowl is used for water filtration, or install a water drying rack to wash fruits and vegetables.

 

The small double bowl is a bit inferior and can’t hold a wok or the like, but it’s still very convenient to have two bowls. The use of dual bowls saves time and effort and improves efficiency.

The double bowl originally has more functions than the single bowl, because most large double bowls will have accessories such as colanders and drying racks. It can be used in partitions, which is unmatched by a single bowl.

 

When washing vegetables, pots and pans, you can separate the two to avoid greasy vegetables. It can also be used separately when washing pots and pans alone. One sink for washing and one sink for draining water. And it can also save water.

 

One bowl for washing fruits and vegetables, and the other for washing dishes. 

 

The length of the double bowl is generally about 80cm. If the length of the counter is longer than 1.2 meters, double bowl can be installed. Many double bowls are designed as one big and one small. If you want to put the wok, the length of the large bowl should be more than 35cm, because the size of the wok is generally between 28cm-34cm. The disadvantage of the double bowl is that the sewer pipe is more complicated, and it is more prone to blockage and water leakage.

Therefore, if you choose a double bowl, it is necessary to buy a good strainer. If the inner wall of the drain is smooth, it is not easy to block. Some double bowls are equipped with threaded drain pipes, or relatively thin drain pipes, which tend to retain oil and cause unpleasant odors.

 

Above counter sink, under counter sink or one-piece sink?

Above Counter Sink:

All the edges of the sink are exposed on the countertop.

The cleaning of the above counter sink is very inconvenient. Over time, the glass glue on the edge of the sink will easily become moldy and black. The picture below may cause emotional upset, but the reality is always so cruel!

 

But its benefits are also very obvious, easy to install and cheap. And because edges are over the counter, the bearing capacity is very good. In case it is really disgusting one day and we can't stand it anymore, it can be easily removed as a whole. The space under the above counter sink is about 3 cm higher than the under counter sink. What does this show? It means that there is a large space under the sink for storage!

 

Under Counter Sink:

One wipe, everything is gone. The under counter sink is lower than the countertop. The water, residues, and vegetable leaves on the countertop will be in the sink with a single wipe. Super convenient. Generally speaking, the under counter sink is quite easy to clean. And it is very beautiful.

 

However, the installation of the under-counter sink is also more complicated. Not only do you have to prepare more installation costs, you also need to remind the decoration workers. Otherwise, it will generally be installed as an above counter sink.

 

In addition, once the under counter sink is damaged, it cannot be repaired and needs to be replaced as a whole. If the under-counter sink is used for a long time, the cracks will be moldy, so the mold-proof glue should be used between the under-counter sink and the countertop.

 

One-piece Sink:

Finally, the one-piece sink. One-piece sink refers to a sink that is an integral part of the countertop. It usually appears in the overall cabinet, and the countertop and the sink are seamlessly connected. The advantage is that there are no gaps, there is no need to worry about mold, and it is really easy to clean up. The disadvantage is that it is very troublesome to replace, which is equivalent to dismantling the entire counter.

 

In short, whether it is stone, stainless steel, or ceramics, whether it is a single sink or a double sink, it depends on the situation of your own house. As long as you choose the right material, bowl size and quantity, installation style, you can choose the best sink for your home.

The sink must be installed in the bathroom? Take a look at these locations that may be more suitable for sinks in your new home!

As a patient with lazy cancer, where to put the sink determines how many steps I have to take to wash my hands. Do I have to go to the bathroom after eating snacks and watching a drama at night, and getting up to wash my hands? Can't the sink be placed at the door? Put it under my nose? Or even in the balcony close to me? The answer is yes.

 

01. Where should the sink be moved out of the bathroom?

In order to make it easier for you to use, we will give you a few common places to put the sink. It can be installed in the hallway. There may be few people who think of this, but it is very common in Japan. As long as space permits, they will find a way to add a sink near the hallway so that they can wash their hands as soon as they enter the house. In addition, the sink can also be used as a partition of the entrance, so that even the entrance hall is made.

 

Put the sink on the aisle at the entrance of the bathroom. In this way,  the dry and wet separations can be easily realized. Because the washbasin only occupies a small area, the total space will not become small.

 

If you are worried that the total appearance will be affected by putting it outside, and later storage can not be done well and it is messy, you can directly weaken it visually during the renovation by adding a wall to enclose it.

 

Wooden fences or glass can also be used as partitions, and cabinets can be used for storage on top.

 

The glass partition can prevent water from splashing everywhere when washing hands, and keep the space visually transparent.

 

If there is a gap between two rooms, you may consider putting the sink here. Such as between two bedrooms, between the kitchen and the bathroom, etc.

The advantage of this is that it can make full use of the space and avoid the waste of repeated settings. At the same time, it can also have the function of dividing space. It can also be installed on the balcony. Modern people spend most of their time in the living room. If you put the sink on the balcony closest to the living room, because there is plenty of light and the view is open, will you feel better when you wash your hands?

We can also put the washing machine next to it, throw the clothes in and wash them.

It is relatively rare to install on the dressing table. A dressing table can be placed in the bedroom to store all kinds of small things, and it can be combined with the sink. Sinks can be installed in the bathroom, outside the bathroom, or between the cloakroom and the bathroom.

According to our thoughts, these may seem strange, but starting from the owner’s living habits, it seems to be a reasonable design. Tip: The disadvantage of placing the sink outside the bathroom is the laying of water and sewage and waterproofing. Need to discuss with construction workers in advance and implement as required. Waterproofing should also be done well. It is recommended to follow the waterproof standard of the dry area of the bathroom, and apply waterproof paint at least 30cm high on the wall near the sink and on the floor. Secondly, there is no door to block the washbasin outside. If the storage is not done properly, the messy scene will be directly exposed. Therefore, the corresponding storage function must be done well, and the choice of towels even become stricter. Otherwise sit in the living room and see a messy washing area.

02. An easy-to-use sink can be like this.

In addition to moving the washbasin, its appearance and comfort should also keep up. You need to know the following knowledge. The style of the washbasin: Above counter basin and under counter basin. Above counter basin has a super good looking. In addition to square, round, oval, there may be other petal shapes to choose from. Generally they can be matched with high body faucets.

The under-counter basin is installed under the countertop and glued to the countertop from bottom to top. The advantage is that it is very convenient to clean the countertop. It is very common to have water on the countertop, you can easily wipe the water into the basin. It is more convenient to have a mirror cabinet, and the storage capacity can be improved a lot. Some mirror cabinets are fully enclosed, and some are partially open for storage. What kind of mirror cabinet to choose depends on your living habits.

Lighting Design.

Light is a top requirement for looking in a mirror. Most people may only install a mirror headlight above the mirror. In fact, the best way is to set up lights on the left and right sides of the mirror, which is about one person wide. Many professional dressing tables are set up in this way.

Double Basin Design

The double basin design can improve life efficiency. For example, a family of four has to go to school and work at the same time. And two people washing together is also very warm. Of course, double basins may only be suitable for large bathroom space.

Basin Style

It can be a basin or not. An artistic design. For example, in a retro-style home, try a bicycle wash basin.

 

There are also a few stacked stones. Is there a trace of natural "spring" style when the water runs out from the stone?

 

If you like minimalist style, consider this transparent glass wash basin.

 

If you want to realize the separation of dry and wet, but in the small area of the bathroom it cannot be realized, the above method can be considered. It is indeed completely reasonable and feasible to move the sink out.

Many years later, people who use black frame shower doors and windows will surely be grateful for this choice.

The black frame has always been loved by people because of its beautiful industrial style. We believe that it is only a matter of time before people find the elegant beauty of a bathroom with black frame shower doors and windows. Black-framed doors and windows made of aluminum or steel look very beautiful in the factory. Whether it is used in the bathroom or other places, it will receive fascinating results. Let's directly look at 8 display pictures that reflect the advantages of black frame shower rooms. I believe there is always one suitable for you.

 

1. Black frame bathroom doors and windows are the eye-catching emperor of the decoration industry!

 

Even with Karaka marble floors and expensive dressers decorated with quartz, the star of the bathroom is still the brass shower head and black aluminum bathroom doors and windows. If you are looking for exquisite bathroom decoration, it is really black framed doors and windows.

 

2. The black frame shower room doors and windows give a unique industrial style.

 

A black framed shower door with coverless lamps and a modern yellow dressing table can create an attractive industrial atmosphere. The high glass window design not only facilitates daylighting but also ensures privacy.

 

3. The black frame doors and windows show the beauty of elegance.

 

When the black frame doors and windows reach the roof directly from the ground, they can make the small room look taller than it actually is. Matched with herringbone parallel pattern floor tiles, a small white marble dressing table and a tall dressing mirror. The overall effect is so elegant and restrained.

 

4. The black frame shower room makes the large white areas appear clearer.

 

White floor tiles + white bathtub + white sink, the bathroom can easily become monotonous. At this time, we can use black frame shower room and black hexagonal tiles in the shower room to enhance the contrast with the white environment, making the whole room more layered and three-dimensional. Finally, brass showers, brass faucets and geometric chandeliers are used to make the finishing touch.

 

5. The black framed doors and windows make the walk-in shower room stand out.

 

An open shower saves space in a small space. It is hard to imagine how elegant a shower room with framed doors and windows is! Due to the good closure of the black frame doors and windows, the slate wall panels and the mosaic wall tiles on the upper wall embellish them, the whole shower room is like a small room fully decorated.

 

6. A shower room with a black frame is simply too modern.

 

Patterned floor tiles, black framed shower doors and windows, and a black dressing table, one of the countless bathrooms in London, looks perfectly adapted to the urban environment in which it is located.

 

7. The black frame shower room can be easily connected with different styles.

 

Hesitating between your favorite pastoral style, industrial style and modern style? The black frame shower room will help you solve it! It can act as a bridge between styles, helping different style elements to seamlessly match together.

8. The black frame shower room are timeless decorations.

 

The black frame shower room may only be fresh for a short period of time, but it does not mean that it will soon become obsolete. This is a decoration with permanent vitality. Especially when paired with other classic elements, like mosaic tiles, subway tiles and some traditional decorations, the black frame shower room has a simple yet elegant charm.

 

Thanks for viewing our website. Hopefully you can find your interested items. Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business. We are one-stop supplier of bathroom and kitchen products.

Buying a new bathroom sink faucet can be a challenging task. You have to consider many factors, such as installation, types, and finishes. 

Also, a wide variety of brands and faucets are available. The bathroom sink is a vital fixture, so selecting the correct faucet is essential. 

Here are the steps for how to choose a faucet for your bathroom sink.

3 Tips on Choosing a Faucet

1. Installation

If you want to switch from two handles to one, you have to think about the number of holes in the sink. 

Most sinks have three holes: one for the hot handle, one for the cold and one under the spout. 

Some single-handle faucets include a cover plate to hide the extra holes. But some don't, so check the label. 

If you currently have a “wide spread” bathroom faucet with two handles far from the spout, 

you can’t switch to a single-handle model.

2. Faucet Types

Ⅰ. Single-hole faucets combine the spout and mixing handles—often a single lever—into one unit that requires only one drilled sink hole. 

For retrofits, some models include a bottom plate that will cover existing three-hole openings. Single-hole faucets are ideal for smaller sinks, 

such as powder room baths. Their simplicity reflects modern sensibilities.

Ⅱ. Center-set faucets fit standard three-hole sinks (with outer holes drilled 4 inches apart). They'll have either a single lever or 

two handles mounted on a 6-inch plate. They're ideal for most bathroom sinks.

Ⅲ. Widespread mounts have three separate pieces: Two handles and the spout. 

The standard distance between the handles is at least 8 inches, and the three pieces tend to be larger than other types of bath faucets. 

Smaller versions, called minispreads, are designed for standard holes drilled 4 inches apart.

Ⅵ. Wall mount faucets have gained popularity along with freestanding or vessel-type sinks that require longer spouts 

that extend well over the top of the bowl. Not every faucet fixture can be easily categorized. Kohler, for example, 

makes a faucet that's integrated into a mirrored wall cabinet. 

All you see is the tiny flow control lever peeking out from the bottom of your mirrored self.

3. Faucet Finishes

Choose a finish that matches nearby cabinet hardware, towel bars, etc. Mismatches look bad. If you plan to replace existing hardware, 

your choice of faucet finishes is wide open. The vast majority of faucets have polished chrome, satin nickel or bronze finishes. 

All of these finishes are durable and keep their good looks for years. But some are more durable than others.

Chrome is the most durable finish and the easiest to keep clean-that's why it's always been the favorite 

for commercial kitchens and public bathrooms. If your faucet gets heavy use, it's your best bet for long-term toughness.

Nickel finishes are usually labeled “brushed,” “satin” or “stainless steel” and have a dull shine. 

They're durable but prone to fingerprints and water spots, so they're harder to keep clean. 

Some have a coating that reduces stains and smudges, but that coating isn't as durable as metal and may chip or wear.

Bronze faucets have a brownish tone and are often called “oiled” or “rubbed” bronze. 

But the surface is a coating (such as epoxy) rather than metal. 

This coating is tough stuff, but can be chipped or scratched more easily than metal.

If not to consider the faucet valve core and aerator, lead-free brass faucet and general faucet mainly differ in the material and technology.

 

Ⅰ. Raw Materials

The main raw material of lead-free brass faucet is made of international standard H59 and H62 copper. The casting adopts steel mold for gravity casting with uniform faucet wall thickness of 2.2-3.0 mm.

The main reason for using brass is the antibacterial activity. This can prevent bacteria from growing on the inner wall of the faucet, which is an advantage that other materials (such as stainless steel and plastic) do not have.

 

Ⅱ. Surface Technology

Surface treatment is very important for lead-free faucet, which is related to the service life, finish and wear resistance of the faucet. High quality faucet surface electroplating is usually mirror effect. It can eliminate secondary water pollution and ensure water safety.

How to judge the quality of the surface treatment of a faucet?

It can be easily judged by the following 3 points:

1. A good faucet will have a moisturizing and shiny surface, while a poor quality will have a dim gloss;

2. A good faucet will have a flat surface, while a poor quality faucet will have a wave surface, even a dent.

3. Good faucets are more wear-resistant, and there are no scratches, but inferior products will have dense scratches on the surface.

Generally, the surface coating of high-quality brass faucet has only 2 layers, and the product can pass 48 hours neutral and 24 hours acid salt spray test.

Ⅲ. Production Process

The production process of faucet is generally the following 16 steps: 

copper ingot - dissolution - casting - cleaning after casting - casting inspection - machining - tolerance inspection - grinding - surface inspection - electroplating - electroplating inspection - assembly - pressure test - finished product inspection - packaging - delivery.

Each process has strict requirements for the production process.

The difference of faucet material selection and production technology determines that the price of lead-free brass faucet is generally higher than stainless steel and plastic faucets.

 

Pull as you like. Return accurately.

When renovating the bathroom, the height of the faucet is a headache: if you buy a low one, you have to bend over when washing your hair or  face; if you buy a high one, It's not convenient for the opening and closing of the mirror cabinet. On the other hand, it will cause water splashing due to the large drop...It is not a problem with the Aquacubic faucet!

 

Aquacubic faucet adopts pull-out design. With 360 degree sprayer head to realize free rotation and pull freely, the water can reach any place where the user needs it, and meet all the needs in the bathroom water process. After use, just let go. The built-in gravity hammer can help the faucet retract easily and quickly. Users can experience the pleasure of face cleaning and hair washing in a new way.

Long lasting new. Easy to clean.

The bathroom is full of moisture. In such an environment, water stains or fingerprints are easily left on the surface of the bathroom faucet. Scales will accumulate on the faucet after drying. They are difficult to clean and even gradually corrode the coating and form rust spots on the surface. To make the bathroom faucet last longer, you need surface treatment technology with easy-to-clean coating.

 

Aquacubic faucet adopts precision electroplating layer and SRS surface treatment technology, and passes 24 hours acid salt spray test. The surface has an elegant metallic luster. They are wear-resistant and corrosion-resistant. Faucet will be bright as new with a light wipe. You don’t have to worry about leaving fingerprints and watermarks when you touch it with wet hands. This reduces cleaning time.

 

The bathroom carries most of the cleaning work of a family. In turn it affects the living experience and life quality of the whole family. If you want to enjoy the exquisite life, you need the Aquacubic faucet that can be pulled freely to bring a fashionable bathroom to you!

Aquacubic provides "Quality Bath & Kitchen Solution" to our customers.
Quality is always the first priority of Aquacubic. We understand the importance of quality to our clients, and quality is the foundation for long -term cooperation. To deliver high quality products, we established the whole quality system from raw materials checking to mass production audit and final products inspection. Most of our products are CE and CUPC certified.

Cooperating with Aquacubic is cost saving. Aquacubic make great investment in machines to increase production efficiency. Thanks to long existence in the industry and good relationship with material suppliers, Aquacubic has good cost control system and bargain power, to ensure competitive pricing for our customers. 

Once you contact with Aquacubic, you will find yourself are in service of a hardworking, reliable, sincere team with good communication skills. Our associates also provide value-added service for design, test report, shipment arranging, freight cost control and so on.

Bathroom faucet brings a modern style to any bathroom setup. Daily washing task is made easier by the classic one-handle lever design of this faucet, which offers effortless control of the steady and clear waterstream. H and C markings help guests easily control water temperature for a better experience.

Nano kitchen sinks will still look brand new even after years of usage. The smooth coating is more resistant to scratches compared to other sink materials present in the market right now.  You can also use it to give  your pet a lovely bath. No worry about scratch, Your pets will never scratch the tub.

The handmade wokstation stainless steel undermount sink is revolutionary to say the least. With a unique corner design, you get all of the beauty of a designer stainless steel sink while meeting your every day kitchen needs. It is as functional as it is fabulous. It's seriously the best of both worlds. Created with premium stainless steel, this hardworking sink with a ledge features placing various accessories on it for prep cooking easily.

Aquacubic has rich experience and passion in bath and kitchen industry and appreciate for your contacting and business.

As a manufacturer of sanitary products for more than 11 years, we have seen many customers whose bathrooms are really full of functions. Although it is small, the functions are still very diverse. Have to admire!

 

Modern decoration requires both practical functions and individual style, so the budget is often difficult to control. The bathroom space usage rate is high. If you can save it everywhere, rework and repair will occur, and the gains will outweigh the losses. At the same time, the cost of furniture and decoration can also be spent more or less. The following are some small details on the bathroom decoration, which can save costs time and time again!

 

1) Waterproofing is essential for walls. 

Waterproofing in the bathroom is very important, not only to choose high-quality materials, but also to ensure professional painting. The wall waterproof in the wet area should be at least 180cm above the ground and 50cm for other places. The ground waterproofing generally needs to be brushed twice and a 24-hour closed water test should be carried out. Wall corners, water pipes, etc. should also be carefully done.

 

Ceramic tiles are the highlight of bathroom decoration. And the wall area is large. You can choose relatively economical tiles to ensure the waterproof performance. You can also directly paint with waterproof paint where it is not in the shower area. It will reduce cost.

 

Mosaics with rich patterns can enhance the visual aesthetics of the space. And to reduce material costs and manual laying costs, mosaics can be laid only on key positions. Tiles, waist line and top line can be selected according to your own needs to control the cost of decoration.

The original light-body wall is removed and replaced with a transparent glass wall, which expands the visual area of the space and also saves costs.

 

Mosaic paving requires a high labor cost, so you can find a large mosaic-like wall tile to pave the wall, which can save a lot of money. Since there are fewer gaps between large-size mosaic tiles, the amount of caulking agent is correspondingly reduced, which is often used for reference and selection in home decoration.

 

2) The floor area should be beautiful and non-slip.

Safety should be placed in the most important position, and slip resistance should be considered in the selection of floor tiles. At the same time, the human body will directly touch the ground, so the quality of materials should be paid attention to. Bright floor tiles are relatively slippery, so use them as little as possible in the bathroom, and use matte floor tiles or tiles with good anti-slip properties.

 

When paving the floor tiles, the slope must be appropriate, and the floor drain must be the lowest point so that the water can flow smoothly. The floor tiles should be made of whole tiles as much as possible, and the gap between the tiles should be controlled at about 2mm.

 

The area of decorative tiles on the ground is smaller than that of the wall. The use of interval paving can save the budget, and only use the same pattern of tiles to be separated by more than one tile.

 

If you want to create a low-cost bathroom with a natural texture, you can use wood-grain tiles instead of waterproof solid wood, which also has the characteristics of natural patterns, elegant colors, and easier matching with other sanitary wares.

 

Paving decal tiles in the bathroom can improve the monotonous bathroom style. In the actual construction process, the cost of laying decal tiles is much cheaper than mosaic.

 

When special-shaped handmade tiles are laid on the ground, they should be from the inside out, the gap between the tiles should be controlled within 8mm, and the height of the caulking agent should be level with the tiles. The paving of this kind of tiles should be carried out in sequence according to the serial number on the back to avoid waste caused by rework.

 

3) Cleverly arrange the exposed and concealed sanitary ware. 

The bathroom is a place where multiple channels of water and electricity converge. In the early stage of renovation, it is necessary to choose quality water pipes, wires, etc. And the wiring must comply with the regulations to avoid water leakage due to design and material selection problems.

As the space expands and functions increase, there are more and more electrical appliances in the bathroom. If you want to install smart toilet lids, integral shower rooms, massage bathtubs, multi-functional bathroom cabinets, etc., you must first make the sockets during the decoration to avoid rewiring in the future and increase the trouble.

 

The plumbing renovation of the bathroom is most laborious. If you want to save this part of the cost, the pipeline must be open-lined, without slotting, and future maintenance can also save a lot of costs.

In addition, avoid excessive wiring when rebuilding waterways and circuits. Use multi-hole sockets as much as possible on the panel of the socket. Under the premise of the same number of wires, you can plug in more electrical appliances. The wiring of the space is reconstructed with open wires, and the wires are routed from the top. The outer wall of the pipe is painted with waterproof paint, which saves a lot of labor costs and is also convenient for maintenance.

 

The bathrooms are uniformly decorated in black and white tones, simple and generous. The upper and lower water pipes of the sanitary ware are made of metal material, which has a long service life and is not easy to be damaged.

 

The space matching has been cleverly designed. The cement wall is matched with solid wood floor tiles, which is elegant and warm, satisfying practical functions and beautiful.

 

4) Shower Area

The quality of the glass used in the shower room is closely related to the safety of the bathroom. Fine tempered glass is generally difficult to break, and it will not hurt people when broken. Therefore, when choosing, don't be greedy for temporary cheapness, and try to choose high-quality, well-reputed brands.

The frame of the shower room is usually made of aluminum alloy, and the surface is sprayed with plastic, so it is not corroded or rusty. The thickness of the main frame aluminum alloy is preferably 1.1mm or more, which is not easy to deform.

 

In addition to professional brand shower rooms, the shower area can also be separated from dry and wet areas with various partitions. Common glass partitions only need to be installed on one side when combined with the wall, which saves costs by using less materials.

At the same time, the installation of the shower room can be omitted. The base of the shower room mainly plays the role of heat preservation and drainage, and the material is mostly acrylic.

 

The shower area is separated by a glass wall, and the ground is transitioned by steps to create a semi-enclosed shower space. The glass partition is directly fixed with hardware without reaching the top, which gives the space better permeability.

 

A wall serves as a partition, separating the wash area from the shower area. The interior of the wash area is covered with ceramic tiles, the exterior is painted with waterproof paint, and the key parts are strengthened.

 

5) Wash Area 

The floor drain is most commonly used for sink, and the wall mount type can be used for more advanced spaces. It is best to have all S-bends to prevent upward odor. Basins are divided into above-counter basins, under-counter basins and wall-mounted basins. Above counter basins for households are more suitable and easy to install. The under counter basin is suitable for a large area bathroom, and the installation is relatively complicated.

 

Small-space or low-budget families can abandon the overall bathroom cabinet, and use a transparent iron frame to save space and leave more space for the legs. Mirror cabinets and recessed cabinets are more suitable for small spaces and complete the storage function of the bathroom. To reduce the cost of decoration, you can choose a single color and simple style in the decoration, and match it with retro copper-colored, metal-colored faucets or mirror lights to create highlights.

 

Build the washstand with cement, and place storage baskets underneath. The wall-mounted faucet is highly decorative, but the size must be measured accurately in advance, otherwise it cannot be installed, which will affect the use.

 

There is no special furniture under the basin; only metal racks are used to save costs and place toiletries.

 

Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We have rich experience and passion in bath and kitchen industry and appreciate your contacting and business. Look forward to cooperating with you. Thanks a lot!

Amazon.ca: 3 hole faucet 1-48 of over 60,000 results for "3 hole faucet" RESULTS KES Black Bathroom Faucet 8-Inch Widespread Bathroom Faucet 3 Hole Vanity Faucet Bathroom Sink Faucet with Supply Hoses SUS 304 Stainless Steel Matte Black, L4350LF-BK 296

25/11/2022· It can handle high heat and pressure, is more sturdy and durable than zinc alloy faucets. 360-degree Rotating Spout: This kitchen faucet spout can be turned 360-degree to facilitate access to a different area of the sink. When not in use, turn the spout sideways and save space in your sink. more 4

This item: Kitchen Sink,New Stainless Steel Waterfall Sink,Bar Sink, 304 Stainless Steel Sink, with Cup Washer Sinks, Drop-in Or Undermount Installation (Color : Black-Grey, Size : …

Kitchen Faucets manufacturer OUBAO kitchen faucets single handle with pull down sprayer customized Description: Look out for a solid metal kitchen faucet body with ceramic discs in the cartridge for smooth easy-to-use activation. A quality kitchen mixer tap will last a lifetime so select a design with timeless appeal.

Single Handle Pull-Down Kitchen Faucet List Price*:

Brushed Nickel Deck Mount Pot Filler Faucet Hot and Cold Water Dual Handle Countertop Double Joints 360° Rotating Retractable Commercial Kitchen Sink Faucet Stainless Steel Pot Filler Faucet Wall Mount Commercial Kitchen Sink Lead Free Brass Inquire Model: AF6030-5 Brand: Custom Made / Aquacubic Product Description 【Premium Quality】:

Economic Brass Bathroom Basin Faucet. material: brass body, zinc handle, it is easy to use. aerator: plastic filter. including fixing set. including 2pcs stainless braided hose G1/2x350mm. Parameters . Name: Economic Brass Bathroom Basin Faucet: Product Code: RB35170-5: Finish: Chrome: Lead time:

Find many great new