2 Handle 3 Hole Mount Faucet- Manufacturers Factory Suppliers From China

For a more useful and faster-drying bathroom, toilet, shower, and washbasin must be separated.

The toilet, washbasin, and shower located in three areas allows people to use them separately.

 

This design has more advantages. 

1. Dry area always being dry.

Using a three-separated bathroom, when the shower is completely independent, the sink and toilet area will not be affected by the shower. Cleaning is also more convenient.

 

2. More people can use the bathroom at the same time.

In the morning some want to use the toilet and some want to brush their teeth. If there is no separation, as long as one person enters, the whole family will have to wait.

However, with the three-separated bathroom, everyone can save time and use separately.

 

Three-separated Bathroom Layout

If the bathroom is a long and narrow shape, it is recommended that the toilet, washbasin, and shower are arranged in a row.

Usually the most frequently used washbasin will be placed in the middle, so you can come in and use it at any time. To the left and right are the shower area and toilet.

The toilet and the shower area can also be arranged on the same side, and the washbasin is placed on the opposite side to form a T-shaped arrangement. Hotels often use this layout, which is relatively confidential, but does not waste space.

 

If you want to add a bathtub, because the bathtub is used less frequently, it is usually placed in the corner next to the washbasin.

 

But to be honest, the three-separated bathroom requires a relatively large area. The partition wall will be added, and the distance between the shower, toilet and washbasin will be increased. If three separations are used, it is bound to reduce the size of other spaces.

 

Design and Construction Considerations

1. The minimum shower area wide is 90cm.

The shower area should be kept wide enough for the person to turn around, and hands should not touch the wall easily when showering. It is convenient to have a width of at least 90 cm.

 

2. The toilet area is at least 70cm wide.

If you don't want it too narrow when going to the toilet, the wall should not be too close. Starting from the center of the toilet, leave a width of 35 cm or more to the left and right to make it easy to use.

The human action is to turn around and sit down on the toilet, so 60 cm of moving space is required in front of the toilet.

 

3. If the toilet is adjacent to the shower area, the water pipe is easy to install.

When the toilet and the shower area are adjacent to each other back to back, the pipeline can be hidden in the partition between the two, and the distance of the pipeline can be shortened.

 

4. There is no need to install a floor drain in the toilet and washing area.

Since the three-separated bathroom has completely separated the toilet, washbasin and shower, and now fewer people will flush the floor. Therefore, it is only necessary to install a floor drain in the shower room. Blocking with waterproof strips can ensure that the toilet and washbasin area remain dry. For floor cleaning in dry areas, it is recommended to wipe with a mop.

 

5. Reduce the area of waterproof coating.

Ordinary bathrooms are usually recommended to do waterproof layer on the walls and floors of the whole room due to the spread of moisture. However, in the three-separated bathroom, there will be no excess water vapor in the toilet and washbasin area. It is recommended to do waterproof only half-height walls.

 

Then we take a look at the examples of the three-separation bathroom.

 

U-shaped Layout

This is a typical hotel bathroom layout. The sink is in the center, and the toilet, shower area, and bathtub are placed on both sides, forming a U-shaped layout. Suitable for use in large-area bathrooms.

 

The doors of the shower room and toilet area are designed with metal mesh, which is ventilated and can be cleverly hidden.

 

The walls and floors of the whole room are paved with the same marble. With metal accessories, the overall style is particularly high-end.

 

One-line Layout

With the double washbasin design, two people wash at the same time without being crowded. With double-sided mirrors and wall lights on both sides, it forms a balanced and symmetrical design.

 

The retro tile floor, the decorative pillars on both sides of the countertop, the delicate and elegant chandeliers, the natural and romantic simple European style.

Off-white is selected as the main color of the space, matched with earth-colored walls. The calm atmosphere makes the bathing space more comfortable and relaxing.

 

If you don't make a door, just use cement partition to separate the shower area or toilet, which can reduce the visual barrier.

A sliding door is used between the shower area and the bathtub, which can be ventilated at any time and can achieve the effect of privacy.

Two-line Layout

The washbasin area is in a single row. Since it is isolated from the shower area, it is relatively dry. The dressing storage is also set together, making it easier to use.

The wash area is in line with the toilet area. The bathtub is next to the shower area. Effectively separate the dry and wet areas. At the same time, hooks are installed on the wall for the towels and bathrobes.

 

If the bathroom does not have a window, you may wish to use colors and lights to brighten it up. The orange half-wall design makes the space bright and vibrant. Place some flowers and plants to make it more vibrant.

The wall is made of cement gray, so even if water drops splash off, it will not leave a trace. The mirror cabinet on the top can effectively increase the storage capacity.

 

In order to leave the central aisle, move the sink outside. Arranging the shower area and the toilet back to back not only effectively shortens the length of the water pipe, but also makes the design more concise.

In a typical T-shaped layout, the shower area and toilet are hidden behind the washbasin to maintain privacy. The wash area divides the bathroom into two parts.

 

The entrance of the bathroom is designed with arches, and the retro red bricks are more antique. The tiled floor extends to the left and right.

 

After reading the above cases, do you think it is good-looking and practical?

 

Thanks for viewing our website. Hopefully you can find your interested items. Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business. We are one-stop supplier of bathroom and kitchen products.

Ordinary sink, also known as drawn sink, is formed by pressing and stretching a whole piece of steel plate.

The principle is similar to balloon blowing, so the bottom and corner of the water sink will be thinned properly, 

usually made of 0.8mm thick steel.

The Handmade Sink is not made piece by piece by hand, but made by cutting, bending and laser welding the steel plate.

Will not change the thickness of the steel plate in the corner, the sink is very sturdy and solid. Usually this thickness is 1.2-1.5mm.

The appearance has strong sense of line, and the weight is much heavier.

The small R angle of handmade sink is not only better in appearance, but also higher in the utilization of the whole sink space.

1. X Grooves Design

Optimized bottom slope makes kitchen sink draining faster than normal sinks. Gently sloped bottom, fast draining and dry after using.

Handmade X grooves design, not only increase the design aesthetic but also easy to drain water in a minute.

Rear set 3.5”drain matches most kitchen appliances and fits the most Common Garbage Disposal System and unlocks extra space.

2. Nano Surface Technology

Nano surface as Lotus leaf. Water and oil flow quickly and no trace left.

Hardness of Nano surface: ＞8H Hardness of regular surface: ＞4.5H

Extreme craftsmanship focuses on every detail of the sink.  Meets the UPC, cUPC, CE certification standards.

3. POSCO 304 SUS Material

Durable scratch and stain resistant stainless steel surface helps the beauty last.

Real 16 / 18 gauge material; never chip or crack. Commercial grade satin finish. Thick 304 Stainless Steel construction.

9 - 10 inches deep large sink can hold a lot of pots and pans. Experience the luxury brought by the global high-end manufacturing industry.

4. Soundproof Pad - 7pcs

Extra-thick coating and thick sound rubber pad assure exceptional noise reduction.

Insulative padding can dramatically reduce the noise causing by water dripping,making an excellent effect on noise elimination.

It can enhance the elegance and high quality of the kitchen, and it will become the focus of your kitchen. The high quality of the sink is praised and recognized by the most demanding customers

Of course it does.

 

What is a wall-mount faucet?

The wall-mounted faucet is to install the water supply pipe in the wall. The faucet is independent, and the wash basin is also independent. The washbasin does not need to be connected with the faucet, so there are more free choices in the washbasin shape. There are more diversified washbasin choices in different spaces and environments. 

The place where the washbasin and the faucet are connected is usually the place where rust and bacteria breed the most. With separate faucets and wash basins, you don't have to worry about cleaning these locations.

 

Two Types of Wall-mounted Faucets.

 

Single Handle

1. Single Handle Single Hole Wall-mount Mixer Faucet

 

2. Single Handle Double Hole Wall-mount Mixer Faucet

 

3. Single Handle Wall-mount Mixer Faucet with Rough-in Valve

 

Double Handle

 

Double handle wall-mount faucet means that the hot and cold water are controlled separately. The left is hot and the right is cold, and the water outlet is in the middle. The copper color part in the picture is the concealed part.

The above are several common wall-mount faucets.

Advantages and Disadvantages of Wall-mount Faucet

Advantages:

1. Save space. In-wall faucets generally save space and free up space on the countertop.

2. Easy to clean. It is more convenient to clean the countertop.

3. It is highly decorative. It can increase the diversity of bathroom decoration and make the space more tidy.

 

Disadvantages:

1. The price is more expensive. The price and installation cost of the wall-mounted faucet is higher than that of the ordinary faucet.

2. Trouble with installation. Need to ask professional installers to install.

3. Trouble with maintenance. Many parts are installed in the wall. So if something goes wrong, it will be troublesome to repair.

 

Precautions for the Installation of In-wall Faucets.

1. Due to the concealed installation, the wall-mounted faucet must be installed in the wall together with the water pipe during decoration. Therefore, it is necessary to choose the faucet style before the decoration.

2. Do not remove the protective cover of the product during the decoration construction process to avoid damage to the product.

3. Be sure to pressurize the product to test whether it leaks. Make sure that the water pipe is connected correctly.

4. The sundries at the connection must be removed before installation to avoid blockage or water leakage.

5. The installation height is best controlled at a height of 15~20cm above the basin. The height above the ground is 95cm~100cm.

6. After installing the faucet, attach the wall tiles, etc.

So should you choose an in-wall faucet?

1. The wall-mounted faucet has high appearance and can be matched with various decoration styles according to your own preferences.

2. The wall-mounted faucet has a miraculous effect when used in a bathroom with a relatively compact space, which can save a lot of space.

 

3. The main concern for the wall-mounted faucet is maintenance, worrying about water leakage. In fact, the wall-mounted faucet is similar to the shower at home. The technology is very mature. It's already very popular.

 

We can make a comparison with ordinary faucets:

1. The connection method is different: ordinary faucet is connected to the water outlet through angle valve and hose to supply water. The wall-mounted faucet is connected to the water outlet through the concealed part to supply water. The concealed part and the water outlet are installed as a whole. As far as the connection method is concerned, there are fewer steps for the wall mount faucet.

 

2. Different accessories: common faucet accessories are angle valve, hose and faucet. The wall-mounted faucet accessories are concealed parts and faucets. Because there are no fittings such as angle valves and hoses, the possibility of water leakage from the faucet is lower.

The more complicated the connection method, the more connection points, the more hidden dangers. The hidden danger of in-wall faucets is actually smaller.

So you can buy the wall-mounted faucet with confidence. Ask a professional to install it. There is no problem.

After installation, its usefulness depends on the size of the basin and bathtub. Therefore, when purchasing, you must first know the distance between the basin / the bathtub and the wall. When selecting a wall mount faucet, the length of its spout must be selected correctly. The spout of the faucet should not be close to the edge of the basin or bathtub, otherwise it will affect the convenience of use. It is best to choose a faucet made of copper and a ceramic valve core, because of its good sealing performance, wear resistance, corrosion resistance and oxidation resistance.

Home decoration is troublesome. Apart from other things, it may be very troublesome to choose the toilet. Although all the toilets on the market only have one function, there are many types. Choose from product details when purchasing. Know these 5 tips before buying a toilet.

 

1. Tips for Buying a Toilet

1) When selecting, you can tap the outer wall of the toilet gently with your finger. If the voice is hoarse, not clear and loud enough, then the toilet is likely to be internally cracked, or the toilet itself is not burned well.

2) The quality of the toilet depends on the quality of its ceramics. A good ceramic surface is uniformly lubricated and has a soft color. Gently touch the surface of the toilet with your hand. The glaze and embryos are delicate, indicating that the toilet is of good quality; for low- and medium-grade toilets, the glaze is rough and the color is dim, and small holes will be found under the light.

3) Pay attention to the return curve and water tank. Choose a glazed one, so that it is not easy to hide dirt and is easy to clean. When selecting, you must reach into the toilet's drain and touch it to see if the interior is smooth. A good toilet manufacturer will not ignore these two details.

4) Choose a toilet that is washable, otherwise you will definitely worry about cleaning the toilet in the future.

5) Test the flushing effect of the toilet pipe. Under normal circumstances, you must first try flushing before buying a toilet. There are some optimized flushing systems that can control the noise decibels below 50 decibels, which is very suitable for families with babies.

 

2. Precautions for Purchase of Toilet

1) The maximum flushing volume is below 6L.

2) Its own weight is above 40 kg.

3) Requirements for accessories: there is a delay water inlet valve; the water level difference is within 3mm; the water pressure has a wide range of application.

4) The height of the water seal is 55-60mm.

5) It is preferred that the inner side of the S-curve is also glazed on the toilet.

3. Precautions for Purchasing Smart Toilets:

1) It is recommended to select the instant heating method.

2) The impulse type is recommended for the water outlet method.

3) With power-off flushing function.

4) In addition to hot water washing and hot air drying, there are six mandatory functions: constant water temperature, sensor switch cover, night vision lighting, automatic deodorization, seat heating and seat bacteriostasis.

 

4. Shower

The shower can be divided into multiple product types according to the water outlet method, installation height, style, etc. When purchasing, pay attention to choosing the most suitable one.

How to judge the shower:

When buying a shower, first find out whether the water effect is good. Secondly, look at whether the surface coating is bright and smooth. Then check whether the shower valve core is made of ceramic, smooth and frictionless. Finally, see whether the shower accessories are appropriate and whether the quality meets the requirements.

 

Precautions for purchase of shower head:

1. It is recommended to choose ceramic valve core for ordinary shower.

2. Copper is recommended for the main body. Choose at least 59-1 copper, with 59% copper and 1% lead. It is recommended to choose CUPC certified showers.

3. It is recommended to choose a shower set with a lifting bracket and a bath faucet.

4. For those who like top spray and large water output, it is recommended to choose a concealed shower system.

5. Most of the items marked with "pressurized shower" achieve the "pressurized" effect by reducing the water outlet, and it is not very comfortable.

 

5. Bathtub

Before deciding to buy a bathtub, the first thing you need to consider is to choose the size of the bathtub according to the area of the bathroom, and set the height of the water outlet. It is also necessary to consider the particularities of family members, such as children, the elderly, and the disabled. When choosing a bathtub, it is best to choose a lower one, and you can also install handrails in an appropriate position. The bathtub itself should also have anti-slip treatment and so on. Relatively speaking, bathtub selection is more complicated.

 

Bathtub Purchase Skills

Gloss: understand the pros and cons of the material by looking at the surface gloss;

Smoothness: Check whether the surface of the bathtub is smooth by hand;

Firmness: the firmness can be tested by pressing by hand or stepping on the foot;

Sound: It is best to test the water to listen to the sound before buying. Don't choose a bathtub with too much noise.

 

Precautions for Purchase of Bathtubs:

1) The bathtub area is not very big. It only needs 1.2 square meters to install a standard bathtub.

2) The one-piece bathtub without separation is more practical.

3) It is better to have a hair filter in the water.

4) When choosing a bathtub with massage, bubble or mixed functions, you must try it first, and then choose the one that suits you.

5) Before the completion of the installation, the water storage and discharge experiment must be done under the standard water pressure, and both cold and hot water must be done.

6. Shower Room

Precautions for purchase of shower room:

1) It is recommended to choose anti-fingerprint treated stainless steel for the frame material.

2) It is recommended to choose a sliding door for the shower door. It has advantages over flat doors in terms of space occupation, convenience, and safety.

3) The recommended thickness of tempered glass is 8mm, and the minimum is no less than 6mm.

4) The quality of tempered glass is critical. Need to know about glass manufacturers and choose factories with CCC certification.

 

7. Bathroom Cabinet

Bathroom cabinets mainly include solid wood bathroom cabinets, ceramic bathroom cabinets, PVC bathroom cabinets, and acrylic bathroom cabinets. The solid wood bathroom cabinet is made of dehydrated solid wood as the base material. It has an exquisite appearance, high grade and good waterproof performance. However, solid wood bathroom cabinets are bulky and prone to cracking and require good maintenance.

Ceramic bathroom cabinets are relatively clean in appearance and easy to take care of, but they are easily damaged. The appearance of PVC bathroom cabinet is more shiny, and the cabinet is lighter, and the waterproof performance is the best. However, PVC bathroom cabinets are easily deformed when subjected to a collision. Acrylic bathroom cabinets are similar to PVC bathroom cabinets, but are more brittle than PVC cabinets, and are prone to scratches and cracks.

Bathroom cabinet selection method:

1) Check whether the bathroom cabinet is damaged, cracked or deformed.

2) Check whether the glazed surface of the bathroom cabinet is flat and whether the surface is cracked.

3) Check whether the various parts of the bathroom cabinet are tightly connected and whether it is used smoothly.

4) Look at the anti-fouling ability of the bathroom cabinet, which can be tested by scribbling and erasing.

 

Precautions for bathroom cabinet installation:

1) If you have not done in-wall inlet and outlet pipe renovation, it is recommended to choose floor-standing solid wood cabinets.

2) It is recommended that bathroom cabinets with a width of 1.4 meters and above adopt the design of double basins.

3) If the feet of the bathroom cabinet are made of wood, it is recommended to use a thin rubber pad to separate them from the floor.

 

When installing, there should be a 1cm gap between the bathroom cabinet and the wall to prevent the back panel from contacting the wet wall for a long time to cause get mouldy.

Cleaning the bathroom is a very important and troublesome task. It is not like the kitchen with obvious large stains and greasy walls, but it is the wettest place in the house. If the cleaning is not in place, it is very easy to breed bacteria. Dust and stains in the bathroom are mostly on various sanitary wares in the space. Although it is not obvious, there are great hidden dangers, such as faucets, toilets, showers, floor drains, shower curtains and so on.

In order to have a clean and hygienic space, this time we will share some simple ways to clean the bathroom. Make your bathroom clean and tidy, and make cleaning fast and easy.

 

01 Clean the Faucet

Frequent use of the faucet causes water stains to accumulate and looks dirty. What should we do?

You can apply toothpaste to the faucet, wipe it with a damp cloth, and rinse it off.

 

If you want to restore the faucet to the previous brightness, you can also wipe it with orange peel on the surface of the faucet, and then dry it with a clean soft cloth. This is because orange peel contains fruit acid, which can maintain the surface of stainless steel and make the faucet look new.

 

02 Cleaning the Mirror 

Do bathroom mirrors also need to be washed? If the mirror is used for a long time, it will feel that there is a thin layer of "fog" on it, which causes the mirror surface to be not clear enough. If so, it means it's time to wash your mirror!

To clean the mirror, you can use vinegar, toothbrush, soap: 

1. Use a cloth dipped in vinegar to wipe the mirror. The water stains on the mirror are alkaline, which can neutralize the acetic acid in the vinegar, so that the mirror shines as new.

2. Use toothpaste to scrub the mirror, it can also ensure that the mirror is clean and bright

3. Household soap to wipe the mirror surface is also effective in restoring the clarity of the mirror.

 

Finally, after cleaning the mirror, remember to wipe off the water drops on the mirror surface with a dry cloth or paper towel to prevent water stains from leaving water marks on the mirror surface.

03 Clean the toilet 

How can the cleanliness of the bathroom be missing the toilet? Those places that the toilet brush can't reach are the depressing existences. In fact, it is not difficult to solve the dirt on the inner corners of the toilet.

Mix white vinegar and baking soda at a ratio of 1:1 to make a cleanser. Spray it around the toilet and let it stand for 30 minutes. The stains will be washed away, which is more than a toilet cleaner.

Spray it before starting to build the bathroom, and when other hygiene is done, the toilet can be flushed.

 

04 Cleaning Tiles 

The ceramic tiles will become yellow and black due to long-term water stains and bath products impregnation. How can the stains be easily brushed?

Mix vinegar and water in a ratio of 1:1 and spray it on the tiles. Spray more on the moldy areas. When it is air-dried naturally, rinse them with clean water.

 

05 Clean the Shower 

After the shower has been used for a long time, a lot of scale will accumulate on the water outlet. It is not only ugly, but also blocks the water outlet. And it will breed bacteria, so the cleaning of the shower must not be ignored.

The cleaning of the shower head is very simple. Just take a plastic knife, pour some white vinegar (to submerge the shower head), wrap the shower head and fix it with a rubber band. After soaking for 1 hour, turn on the flushing water, and the scale can be cleaned. At the same time, white vinegar also has the effect of disinfection and sterilization, which can kill two birds with one stone.

 

In addition to stains in the bathroom, there is also an unpleasant odor. The bathroom with a "weird" smell is the most intolerable!

 

06 Toilet Deodorization 

If you want to remove the smell in the bathroom, you can do this!

1. Pour white vinegar into the floor drain, wait for 3-5 minutes, pour the mixed solution of water and baking soda into the floor drain. The soda solution and the white acetic acid alkali will be neutralized. It can quickly eliminate the smell of the floor drain.

2. Slice the fresh lemon and put it in the bathroom to prevent mildew and odor.

3. Put a cup of balsamic vinegar. The smell of the bathroom will disappear. But the balsamic vinegar should be changed regularly, like once a week.

After learning these tricks, clean up your bathroom as soon as possible. The bathroom will feel like a brand new one.

Let there be a lot of things outside, leave a corner quietly in the room. 

Under the dim sky, admire the bright moon. 

Talk about the wonderful life with your lover. 

Continue the romantic vow of "hold your hand, grow old with you".

Enjoy every inch comfortable cozy time with your heart.

Shakespeare wrote: "There are a thousand Hamlets in a thousand people's eyes." There are also a thousand homes in a thousand people's eyes. So what are the home design styles that current couples love? How to create a sense of happiness at home in the two-person world?

Choose Home Style:

01 Simple Style 

The world of young people is always simple and beautiful. The simple style is not only the simplification of design elements, but also the serenity, comfort and warmth of a two-person home.

02 Modern Style 

Sweet time is always quiet and happy. The modern style pursues the practicality and flexibility of the space. Through the mutual penetration of functional spaces, and the transparency of simple wide areas, it can give romantic couples more practical applicability.

03 Nordic Style 

The romantic two-person world is always sweet and warm. The Nordic style with logs and white as the main colors, from layout planning to detailed experience, gives people a simple, fresh and natural feeling. It adds points to sweetness.

Use Decoration Skills:

As a two-person home, it is necessary to clarify the living requirements before decoration design. Do a good job of space planning. Increase the functional area as much as possible, and pay attention to the following two decoration tips:

01 Choose Light And Medium Colors To Extend The Space:

Choose bright colors in an exclusive space suitable for two people to live in. The visual sense will be strong. In terms of color, light tones and intermediate colors should be selected as the basic tone of furniture, bedspreads, sofas, and curtains, supplemented by low chroma space. Extend the space to form a warm home atmosphere.

02 Choose A Uniform Material:

The home for two embraces warmness and brightness. The color of the ground can be used in the color system with strong brightness and low purity. Use pebbles to make its own guiding line. In the flowing atmosphere of light and shadow, feel the quiet time between two people.

Create A Home Style That We Love

 

01 Living Room:

As the most functional area in the home, the living room can not only meet guests and friends, hold small family gatherings, but also entertain and relax the body and mind. Before decoration, you can use the open design to expand the space in the living room. If you seldom meet guests at home, you can also change the living room to a study room to create a small and flexible two-person world.

02 Bedroom:

One-third of a person’s life is spent in sleep. The bedroom of two people should be kept in a clean and tidy color, interspersed with delicate small objects. Create a romantic and warm atmosphere, so you can feel the pleasure and relax as soon as you enter the room.

 

03 Kitchen:

Japanese writer Yoshimoto once wrote in "The Kitchen": "In this world, I think my favorite place is the kitchen." The expectation of a better life in the couple's room has been witnessed by the kitchen. Even if the space in the house is small, a small round table can be placed next to the sofa, which is enough to make the most romantic dinner for two people.

 

04 Bathroom:

As a frequently used area in the home, the bathroom is small, but it is a very important part of the decoration. If the decoration design is not in place, it will affect the happiness of family living. Therefore, before the decoration design, while focusing on individualized and practical design, it is also necessary to control all the details of the bathroom to prevent the lovers' daily life from being affected.

Recommend 1: Black Shower Head and Handle Set

A shower helps you wash away the exhaustion caused by a busy day’s work. While getting rid of the fluctuating water flow, enjoy a new comfortable shower experience. Let your body and mind get a great relaxation and rest. The water flow is smooth and not easy to be blocked, bringing a more hearty shower experience. The unique in-wall waterway design, simple silicone surface, and smooth lines make people feel friendly and comfortable, and also increase the overall beauty and sense of space.

Recommendation 2: Bathtub

 

At the end of a day's work, go home and soak in a comfortable hot bath. Lazy, relaxed and at ease. But many can't pick a bathtub, and worry about wasting space and interfering with the normal use of other bathroom functions. Don't panic. Aquacubic can help. A variety of product specifications can meet different needs. The soft arc, elegant design, and unique color matching enhance the fashion sense and decorative effect of the entire bathroom. The pure white color satisfies the sense of cleanliness. Enjoy the clean experience easily. When you take a bath, you can enjoy the moment of immersing your body in warm water, relieve fatigue and decompression, which greatly satisfies the lovers' pursuit of high-quality life.

 

Practical and comfortable household products simplify the steps of life, improve the quality of life, and enhance the sense of happiness in life. Work with Aquacubic to create a sweet and warm home for two people, enjoy the love and care given to each other, and let the love heat up.

The bathroom is used for bathing, washing, dressing, and indoor toileting. It is a frequently used home space. But the bathroom space only accounts for a small part of the overall home space. In the limited area, bathroom storage becomes very important.

It doesn't matter if you didn't plan the storage space when you renovated the bathroom at the beginning. Recommend 5 bathroom storage products to make your bathroom space organized.

 

1. Multifunctional Shelf

Wash away all fatigue and awaken physical and mental energy. The small bathroom is actually our energy gas station. Every morning and evening, we will spend some time alone with "it". The bathroom is a very important space in the home. The area of this space is small, but there are a lot of items that need to be accommodated. Therefore, the storage  in many people's homes has become a big problem.

 

The multifunctional shelf solves this problem for everyone. Placed in the bathroom to store up some odds and ends. It looks neat and beautiful. And the simple structure makes it easy to clean. Moisture-proof and ventilated, it is a good storage item. It is effectively matched with the bathroom space.

2. Triangle Shelf

Another essential piece of hardware in the shower area is the triangle shelf. You can usually put shampoo, shower gel, skin care products, razor, etc. The racks are distinguished according to the installation position. There are ordinary rectangular racks, which are installed on a wall. There is also a tripod, installed at the junction of two walls.

 

This shelf uses a triangular design, simple in shape, beautiful and high-end, very suitable for modern bathroom design. Exquisite corner design, effective use of space. The weight-bearing capacity is also top-notch, meeting the needs of life.

 

3. Towel Rack

The towel rack is a must-have item for the bathroom, which integrates practicability and aesthetics. Nowadays, there are generally products such as single rod, double rod, multi-rod on the market.

The towel rack has good moisture resistance, corrosion resistance, compression resistance and high temperature resistance. The design of split layer and widening of the bars are adopted to prevent the towels from sticking to each other. Can be very moisture-proof and easy to take. Large space capacity. The lower bar can be used to hang towels. The upper layer can be used to put clean bath towels or clean clothes.

 

4. Multifunctional Paper Tissue Holder

A good tissue holder can last for many years. It is not only a tissue holder, but also a shelf. The mobile phone can be placed to free your hands temporarily. You can also put some aromatherapy or green plants and other small objects on it. The multifunctional paper towel rack adopts an open design, so you can know the remaining amount of paper tissue at any time, and no longer have to worry about being trapped in the toilet because there is no paper.

 

Suspended design, hygienic and moisture-proof. The roll of paper keeps a certain distance from the wall. The paper towel does not come into close contact with the wall.

5. Toilet Brush Holder

It is not hygienic to put the toilet brush on the ground, so there is a toilet brush holder. It is clean and tidy, and beautiful. The toilet brush holder uses high-quality stainless steel to make the bracket, which is waterproof, wear-resistant and not easy to corrode, and is not affected by water vapor and damp walls in the bathroom space. Long-term use is more assured.

 

Upgraded one-piece casting base design, meticulous workmanship, practical and durable. The simple style is highly integrated with the bathroom environment and enhances the bathroom style.

It is "too difficult" to put bottles and cans in a small bathroom. Organize items in a planned way and add storage items reasonably to make the bathroom space more tidy. Let's expand the small space from now on, let's take action!

This article introduces the three main components of the faucet. It will help you to understand the quality and material of faucets we use everyday. Uncover all the mysteries of the faucet.

 

Part 1: Composition

The three most basic components of a faucet: main body, plating and cartridge.

01 Main Body

The main body is the torso part of the faucet. The water flows in and out of the main body all the time. So the material is important. It determines the water quality.

 

Copper Alloy Faucet

Copper alloy is currently recognized as the most suitable main material for home use faucet, and the mainstream is brass. On the one hand, copper has good machinability, fluidity and formability. On the other hand, because copper ions have a bactericidal effect, they can kill super bacteria such as MRSA within 30 minutes and prevent the bacteria from producing antibodies. The inner wall of the copper faucet will not breed bacteria and become the most suitable carrier for "water".

 

According to different proportions of copper content in copper alloys, copper alloy materials can be divided into 52, 55, 59 and 62 copper. Among them, 59 copper is the best. The content of copper metal is 58%-60%, the content of lead metal is 0.08%-0.2%, and the content of other elements is about 2%. The remaining metal is basically zinc.

 

Because lead metal will precipitate when water enters the faucet, it will pollute the water. If the lead content is too high, it is harmful to the human body. Therefore, some brand faucets use low-lead copper, that is, the lead content is less than 0.1%. In view of the fact that it is difficult for general consumers to judge the lead content, it is recommended to choose a faucet with a clear mark that uses low-lead copper.

 

Zinc Alloy Faucet

Zinc alloy is an alloy based on zinc and added with other elements such as aluminum, copper, magnesium, cadmium, lead, and titanium. Zinc alloy is easily corroded in water. After being corroded, the metal will be mixed into the water and cause harm to the human body. The biggest advantage is probably the low price.

 

Stainless Steel Faucet

The main components of steel are iron and carbon. Ordinary carbon steel is easy to rust. Adding chromium, nickel and other metals to carbon steel can make the steel corrosion resistant. Therefore, the most important factor affecting the corrosion resistance of stainless steel is the content of chromium.

 

Stainless steel has the advantages of acid resistance, alkali resistance, corrosion resistance, and no release of harmful substances (lead). But compared with copper, it has one of the biggest drawbacks, that is, it does not have antibacterial function.

 

Brief Summary

If the budget is sufficient, choose low-lead copper faucets. If you can't identify whether it is low-lead copper, choose a product from a big brand.

If you have a small budget, you can choose stainless steel faucets. The price will be cheaper. However, relatively there will be some problems. In particular, we must choose products from high standard manufacturers. After all, it's about your own health, don't be greedy for cheap.

 

 

02 Plating

The faucet is used in a humid environment, and its surface requires a good finish. The common surface treatment method on the market is electroplating, mainly including chrome plating, nickel plating, titanium plating and so on. In addition, there are some rarer methods such as baking varnish, porcelain, and imitation gold electrophoretic paint.

 

Chrome

Chrome plating is the most common faucet plating. Chromium is a white metal with a bluish color, which has high hardness and wear resistance. Its hardness exceeds even the hardest quenched steel, second only to diamond.

Chromium is not easy to change in a humid environment and can maintain the surface gloss for a long time. With a silver appearance, chrome-plated faucets are more popular with consumers.

 

Nickel

Nickel can quickly form a very thin passivation film on the surface of the faucet. Can resist the corrosion of water vapor and certain acids. Has excellent corrosion resistance and stability. Can resist the corrosion of water vapor and certain acids. Therefore, the stability of the nickel layer in a humid environment is very high.

Titanium Alloy

Titanium alloys are made by adding aluminum and tin elements or aluminum and vanadium elements to titanium. Electroplated titanium gold has the advantages of high strength, low density, strong toughness and good corrosion resistance. The surface of the titanium-plated faucet is as smooth as a mirror. Its golden luster looks elegant and rich, and very decorative. However, the process of plating titanium gold is complicated. It is very easy to absorb impurities during thermal processing. Therefore, the yield is low. The cost is also higher.

 

Baking Varnish

Baking varnish is to put two layers of coating on the faucet. Each time the paint is applied, it is sent to a dust-free constant temperature baking paint room for electric heating or far-infrared high temperature baking.

The surface of the baking varnish faucet is smooth and shiny, which can present a visual texture similar to that of a piano, making the whole product look very high-grade. However, compared with other surface treatment methods, baking varnish faucets are more prone to surface peeling. The durability is not as good as the traditional chrome-plated faucet. This method is not widely used.

 

Brushed

This treatment will make the surface of the faucet visually rough. However, it is quite delicate to the touch, showing a restrained beauty. The brushed process mainly relies on mechanical friction to produce several common textures such as straight lines, chaotic lines, threads, corrugations, swirling lines and intermittent silk lines on the surface of the faucet. It can also create matte, mirror, three-dimensional, embossed, satin and other effects.

 

Brief Summary

Appropriate surface treatment can make the overall shape of the faucet rich and full. Choosing the right faucet can also become the finishing touch to the bathroom decoration. It is pleasing to the eye.

There are generally multiple layers of plating. There are also some cheap faucets that are only coated one layer. The coating is not as thick as possible, but just right. If the coating is too thin, it will not be able to prevent corrosion. If the coating is too thick, it is easy to peel off. Copper + nickel + chromium is best. Copper can provide excellent adhesion. Nickel makes the coating have excellent corrosion resistance. Chromium makes the surface bright and flawless, and it is hard and scratch-resistant. Further improving the corrosion resistance. In addition, the faucet that has passed the 48-hour professional salt spray test will be more guaranteed in terms of corrosion resistance. Aquacubic's products have passed these tests.

 

03 Cartridge

The cartridge is a part that realizes the basic functions of direction control, pressure control or flow control by means of the rotation of the valve stem. The water flow enters the main body of the faucet through the cartridge and finally leaves the water outlet. The faucet used at home is turned on and off countless times a day. It can be seen that the quality of the cartridge is also very important to the faucet.

Ceramic Cartridge

The ceramic cartridge has less water pollution, good wear resistance and good sealing performance. Many high-quality faucets use ceramic cartridges. The ceramic chip must have good airtightness, stable physical properties, wear resistance, and long service life.

 

Stainless Steel Cartridge

The biggest advantage of the stainless steel cartridge is that it has a larger adjustable angle of rotation and is not easily affected by water quality. It is more practical to choose this type in areas with poor water quality. However, stainless steel has worse wear resistance compared to ceramic. After it is used for a long time, water leakage is prone to occur.

 

Roller Cartridge

Roller cartridges are old-fashioned cartridges. No matter in terms of price, water pollution or life span, they are inferior to ceramics and have been phased out. There are very few roller cartridge faucets on the market.

 

Part 2: How to Buy ?

After understanding the most important parts of the faucet, let's take a look at the precautions when purchasing.

 

01 The Weight

Faucets made of brass are heavier. So you can make a preliminary judgment by weighing the faucet. However, many manufacturers can increase the weight of low-quality faucets through some methods. So here is a commonplace saying, for consumers who can't distinguish the material, it is better to choose the leading brands. This is the simplest selection method.

02 The Surface

In sufficient light, carefully observe the electroplated surface of the faucet. Good electroplating looks as bright as a mirror, without any oxidation spots and burn marks, no pores, no blistering, no plating leakage, no burrs to the touch. After pressing the faucet, the fingerprints will spread out quickly, and it is not easy to adhere to dirt.

 

Breathing out the surface of the faucet. For products with good electroplating quality, the water vapor will quickly and evenly fade away. If the quality is not good, the fading speed will be slower, or not fade. The faster and more even the water vapor fades, the better the quality.

03 After-sales Service

The after-sales service of the product is very important, and it is also the guarantee for you to have no worries. Be sure to buy products with good after-sales service. The general faucet is guaranteed for at least 5 years.

 

When choosing a faucet, the most important thing is to look at the material, plating and cartridge of the faucet. Because the material determines the safety of the water. The coating can increase the service life of the faucet, so that the faucet has scratch resistance, corrosion resistance, and the surface brightness will be better. The cartridge is the heart of the faucet. Generally high quality faucets use ceramic cartridges. It has the characteristics of strong wear resistance and good sealing performance.

Bulkbuy Wholesale Single Lever Brass Basin Faucet Cold and Hot Water Mixer for Bathroom Dark Grey price comparison, get China Wholesale Single Lever Brass Basin Faucet Cold and Hot Water Mixer for Bathroom Dark Grey price comparison from Faucet, Mixer manufacturers

Double Bowl Sinks; Sink Accessories; Promotions; Shop by Style; Transitional; Traditional; Modern; Filtration; RoomCreate; ... Matte Black Faucets. Bidet Seats. Trending Products. Saybrook Single-Handle Pull-Down Dual Spray Kitchen Faucet 1.5 gpm/5.7 L/min With Filter Shop Now. AquaWash 2.0 Electric SpaLet Bidet Seat With Manual Operation

offers 658 shower curtain rods curved products. A wide variety of shower curtain rods curved options are available to you, such as material, feature, and metal type.

8/8/2022· Features: The stylish Modern Two Handle Dual Joint Kitchen Pot Filler will instantly upgrade your kitchen. The faucet's retractable arm is the perfect height to quickly fill pots on a

Luxuriate in your walk-in shower with a shower seat, perfect for additional stability or a moment of total-body relaxation. Whether a moveable seat or built-in bench, shower seating elevates your …

This item: MSTJRY Stainless Steel Pot Filler Faucet Wall Mount Commercial Kitchen Sink Faucet Folding Stretchable with Single Hole Two Handles

Widespread Bathroom Faucet with Drain Assembly by Luxier From

Imdorf Bathroom Faucet Industrial Style 3 Hole Double Handle | Signature Faucets