Brass High Quality Pull Out Bathroom Faucet- Suppliers Factory Manufacturers From China

The bathroom is full of water vapor after taking a shower? The bath water splashes on the ground? Sometimes you slip and fall accidentally? The bathroom without separation of wet and dry is simply maddening. The separation of wet and dry is an unavoidable matter in the bathroom. As long as we have a slight requirement for the quality of the bathroom, we will immediately take care of this matter. Because the separation of wet and dry in the bathroom is a very cost-effective job, it will make your bathroom life full of happiness in minutes. How to achieve the separation of dry and wet in the bathroom? For small-sized bathrooms, the partitions are too narrow, and they cannot be separated from wet and dry. Very tangled. So how to separate wet and dry in a bathroom of only about 5 square meters? Let's analyze how to separate wet and dry in a small bathroom!

 

Separated by Shower Curtain

The shower curtain is the simplest and most beautiful way to separate wet and dry in the bathroom. It can be said to be a must-have artifact for the bathtub. Use a shower curtain to separate the dry and wet areas of a small apartment, which is the most trouble-free and cost-effective. Whether it is an arc-shaped corner, or directly draw a straight line, make a water retaining strip and hang a shower curtain. It is very convenient. You can also frequently change the style of the shower curtain to a different style. But the disadvantage is that it cannot effectively block water vapor, and it is easy to grow mold and needs to be cleaned frequently.

 

Glass Partition

Compared with the shower curtain which can not effectively isolate the water vapor, the shower door is much more practical. More suitable for bathrooms equipped with showers. The shower door is mostly made of glass. Glass partition is a better choice. On the one hand, because the glass is transparent, it does not appear to be visually narrow. Second, because the glass has better water resistance, the effect of wet and dry partitions will be better.

 

Half Wall Partition

For small apartments, this is also a good choice. Not only can it perfectly achieve the purpose of separating dry and wet, but also use the half  wall to create its own style. Pasting retro-style or modern-style tiles on the wall can play a decorative and beautifying role.

 

The water pipe under the sink does not contact the floor.

In addition to working on the door, you can also separate wet and dry in places such as sinks and basins. The important point is to not to touch the floor! Bathroom furniture that is not exposed to water stains is less likely to be corroded, which increases the service life and is also easy to clean.

 

Move the Sink Out

The most complete wet and dry separation is to move the sink directly outside the door. Use part of the outside space to make the shower area inside the bathroom more spacious. In addition, the external washbasin also allows a family to wash without interfering with each other. The vanity and sink are placed outside the bathroom. Completely cut off the moisture in the bath. Small apartments can also use the walkway outside the bathroom to do so!

 

Do you like the bathroom with separate dry and wet function? The dry area and wet area of the bathroom are perfectly separated, which not only partitions the space, but also is visually more fashionable and rich in spatial level. Wet and dry separation has gradually become mainstream in bathroom design, so hurry up and give it a try!

The bathroom area is small, but it needs to be equipped with sinks, cabinets, washing machines, showers and toilets. There is a new way by changing the water route in advance to move the basin outside the bathroom!

Simplify the Bathroom

If you want the washbasin to be outside the bathroom, the most feasible way is to move the door of the bathroom inward to ensure the privacy of the toilet and bathing area.

This approach is actually the traditional "dry-wet separation".

But the difference is that the original washroom door does not need to be installed, and the basin area and the outer area are more integrated.

 

A sliding door can be installed between the toilet & the shower area and basin, or a specially customized water resistant door. The floor tiles at the basin area can be designed as a unified design with the outside of the bathroom.

 

The laundry area and the basin are integrated on the outside, because it is not afraid of moisture, the towel basket does not need to be stuffed in the cabinet.

The overall space has not become more crowded by adding walls. Entering the door, the bathtub and shower head are immediately visible and easy to use.

 

Generally, ultra-thin lightweight partition walls are used, and waterproof coatings are also applied, so there is no need to worry about the partition walls being too thick or not moisture-proof.

Move the basin outside the door

 

The size and layout of the bathroom are not satisfactory, so let the washbasin truly stand outside the bathroom door!

Where should I install the basin outside the bathroom door?

First of all, it is recommended to be as close as possible to the original sink drain pipe, which is convenient for construction and saves labor and money.

 

Secondly, consider the habit of daily use of basins. For example, every morning, if you and your family can't wash and go to the toilet at the same time, put the basin near the bedroom.

You can brush your teeth and wash your face when you get up in the morning and go out.

 

If there is a corridor end or a concave wall near the toilet, it is most suitable to install the sink cabinet.

But it doesn't matter if there is no concave wall, self-built partitions are equally beautiful. 

The lockers for bathing products can be placed above the basin together. In this way, the remodeled bathroom will be more refreshing and easy to take care of.

 

The wash basin can be placed on the balcony.

The wash basin is placed on the balcony because it does not occupy the kitchen and bathroom space, and it is convenient to dry the towels after washing.

Now that the water pipe has been connected to the balcony, you can also plan a good-looking basin. In addition to washing, water for watering flowers and boiling water can be obtained here.

 

For a family with one bathroom but three generations living together, one more basin can reduce a lot of inconvenience in life.

Make a simple-style balcony hand-washing area. It’s more convenient to wash your hands and fruits now.

Wash basins can be hung on the wall. 

The washbasin can also be hung on the wall to play its function, but it will involve all kinds of wall drilling. And it can’t be moved after it’s built, so consider carefully before decorating it.

The best place to put a basin in the bedroom.

The cosmetic storage cabinet can be installed under the basin. Daily skin care, makeup, and makeup removal can be done easily.

 

If the toilet is close to the hallway, install a basin beside the hallway to enrich the functions of the hallway.

 

The dining room can also be equipped with an independent basin, and the water pipe can be taken from the kitchen at the beginning of the decoration.

 

Installing the basin outside the bathroom, in addition to being practical and convenient, can also match the overall style of the home. The washbasin can be integrated into the design of the cabinet, and the surrounding waterproof treatment should be done.

The bathroom at home is one of the most frequently used places, and the quality of the bathroom directly determines the quality of life.

Bathroom products that can be used for a long time are normally: toilets, bathroom cabinets, wash basins, and bathroom hardware.

 

Toilet

There are two types of toilets: split type, one-piece type and wall-mounted type. According to the sewage discharge method of the toilet, it can be divided into back flush type, siphon type, jet type, and super spiral type. When purchasing, choose according to different spaces and waterway positions.

 

Although there are many types, you can refer to the following methods when purchasing.

1. Whether the gloss of the toilet itself is good enough. The glossier, the better the compactness;

2. It is not that the smaller the water tank, the more water-saving. Some water tanks are not small, but the water storage line is low. The flushing performance is very good, and it is also very water-saving. Generally, the water tank is 6 liters of flushing water, and the two choices of 3 liters and 6 liters is better;

3. Check whether the internal structure is compact, sensitive and reliable.

 

Bathroom Cabinet

Bathroom cabinets are an important item in bathroom selection, and there are many types. According to the material, it can be divided into solid wood bathroom cabinet, ceramic bathroom cabinet, PVC bathroom cabinet, MDF bathroom cabinet, glass bathroom cabinet, stainless steel bathroom cabinet and so on.

What does the most practical bathroom cabinet look like?

 

 

How to choose?

1. Generally, a complete set of bathroom cabinets needs to be checked for deformation;

2. Check whether the surface is cracked and the glaze is smooth and even;

3. When the cabinet door is opened and closed, check whether the door hinge has a sound or smooth;

4. Use a pen to scribble on the cabinet and wipe it off to check its anti-fouling ability.

 

The bathroom cabinets are rich in styles, so you should decide what material you want when choosing. The specific styling is determined according to personal preference and home decoration style.

Wash Basin

The wash basin is responsible for the appearance of the bathroom. The type and style of the washbasin are also dazzling, such as table top, column type, wall type. And cabinet body are also very particular.

Desktop: Above counter basin or under counter basin?

Above counter basin: High-end, easy installation, rich product selection, easy to disassemble and repair. But water is easy to leak into the sink cabinet and the corners. If the installation is not careful, there will be exposed glass glue, which will turn yellow and black after a long time.

 

Under-counter basin: low profile, integrated with the countertop, beautiful, easy to clean, no dead ends. It is easy for the water basin to deviate from the middle position of the sink cabinet. It is necessary to choose a faucet with a suitable water outlet angle. Under-counter basin is inconvenient to disassemble.

 

Column type: does not occupy space, especially suitable for installation in toilets with insufficient space.

Wall-mounted type: as the name suggests, it is used on the wall, compact and not occupying space, simple and stylish.

Basins can be made from different materials. Stainless steel, porcelain, marble, and glass all have pros and cons. Just pick the one that suits you.

How to choose?

1. Look at the manual first. If it is a glazed basin, the lower the water absorption, the better the quality.

2. Faucet holes. Most porcelain basins have a single hole for mixer faucets. When buying a washbasin, you can ask the supplier to make the hole. If you make the hole yourself, it is likely to destroy the entire washbasin.

3. The high-quality washbasin has a smooth glaze, no pinholes, no lack of glaze, etc.

Striking with a hard object will make a crisp sound.

4. In order to ensure that after quality problems occur, the seller can repair them in time, it is better to keep the invoice issued by the seller.

Hardware

Hardware accessories include: faucet, shower, shelf, angle valve, soap net, clothes hook, etc.

They are not large, but frequently used things. If you pick them well, it will not only be easy to use, but will also improve the quality of the bathroom.

How to choose bathroom hardware?

1. First look at whether the coating is good. Generally, the brighter the surface, the more obvious the mirror effect, and the more rigorous the process.

2. The packaging design is beautiful, and the quality inspection certificate, installation manual, and related after-sales manual are available, indicating that the qualifications are complete.

3. After holding the hardware for 2 or 3 seconds, loosen it. If the fog and traces disappear quickly, it is made of copper, heavy weight, thick and durable.

The sink is the most important part for kitchen decoration. When cooking and washing dishes, 65% of the time is spent dealing with the sink. If you choose the wrong one and want to change, the countertops and cabinets will be changed accordingly, and you will regret it by then.

There are so many sinks, which one to choose without regret?

We summarized the advantages and disadvantages of the sink materials on the market, the experience of using single and double bowls, and the precautions for installation. Let you never make mistakes in the sink when decorating the kitchen.

 

Which is better for the sink material?

Common sink materials include stone, stainless steel, ceramics, etc.

 

Artificial Stone:

Advantages: good cleaning, seamless docking, various colors.

Disadvantages: the texture is not as hard as steel.

 

Many people say that the artificial stone large single bowl sink is easy to use. The capacity is large enough, comes with various drain racks, not afraid of scalding, and will not stain. Simply clean it for 2 minutes a day and it will be shining. If the countertop material is acrylic or quartz, it can be seamlessly connected, and there will be no annoying, moldy silica gel.

 

Granite:

Advantages: strong, scratch-resistant, wear-resistant, and high-temperature resistant.

Disadvantages: easy to scratch pots, bowls and tableware; need to clean up every day.

 

Granite is also a kind of stone, and it also has the characteristics of high hardness, wear resistance and high temperature resistance.

However, there are many disadvantages of granite. Because of its high hardness, if you drop porcelain utensils, they will break for sure.

Because it is super abrasion-resistant, to the degree of sharpening the knife, be careful when washing pots with paint on the surface. The sink can scratch the paint!

 

The stone has the characteristics of easy bleeding, especially when the sink has cracks. The colored liquid can easily penetrate into the stone. Colored liquids like soy sauce or corrosive liquids such as vinegar must not be poured into it, otherwise just wait for the dyeing later. It will cause big trouble in dish washing.

The most important point is that the stone breeds microorganisms at a super fast speed, so you have to wipe it every day like the bathtub!

 

Stainless Steel:

Advantages: anti-oil, anti-fouling, not afraid of acid and alkali, affordable, strong and flexible.

Disadvantages: prone to scratches and water stains (brushed stainless steel will be better).

 

Stainless steel has the characteristics of oil and dirt resistance, and because of its low hardness and easy processing, it has a variety of shapes. Many sinks are now integrally formed. A sink is stamped directly from one steel plate, which greatly saves production costs. Stainless steel is suitable for most families.

 

It is very important to choose a brushed matte surface, which is both dirt-resistant and wear-resistant. Imagine the water stains, handprints, and scratches left by washing dishes and pots after using the shiny polished stainless steel several times. It is simply horrible. The stainless steel sink of good quality has a uniform and fine brushed texture, and it feels very smooth, so that the oil can flow smoothly and will not remain. The inner corner of the sink should be rounded so that it will not hide dirt. To choose stainless steel, you must look for the SUS304 mark, and only the real 304 stainless steel can have quality assurance.

 

Porcelain:

Advantages: strong, acid and alkali resistant.

Disadvantages: heavier, easy to break, difficult to clean oil stains.

 

The biggest advantage of the ceramic sink is its good-looking appearance. Ceramic sinks are heavier than stainless steel sinks and lighter than stone sinks. The weight is relatively heavy, and it has an apron front, so installation is very laborious. And one of the most criticized aspects is that ceramics have a kind of adsorption ability for oil. If it is not cleaned for a while, the upper edge will become dirty. And it is also very laborious to clean.

But it's really beautiful.

 

Single Bowl or Double Bowl ?

Single bowl or double bowl, this is a topic that everyone is arguing about when choosing a sink. After reading the following analysis, you will probably know what suits you.

 

Single Bowl:

Advantages: easy to put in a large pot.

Disadvantages: ordinary faucet can not clean the entire sink(can be equipped with pull-down faucet); function is not partitioned (can be equipped with mobile sink).

 

There are so many fans for the big single bowl, because it is big and deep enough that a large wok can be stuffed. With a pull-out faucet, you can clean every corner of the sink.

Large single bowl generally refers to a bowl with a length more than 60cm and a width more than 42cm, otherwise it is a small single bowl.

 

However, a large single bowl is more suitable for a kitchen with an area larger than 4 square meters, and a small single bowl can only be selected for a kitchen with a small countertop.

Most of the sinks on the market are sold in sets. Many sink sets include accessories and gadgets. Although these accessories and gadgets are gimmicks under the guise of "giving away", they are actually added value of the sink. With them, the function of the sink can be more perfect.

 

For example, a rectangular colander can hold dishes, vegetables, etc. The drain holes are evenly distributed and can drain water quickly.

 

Some large single bowl sinks are also equipped with a hidden knife holder, which is more convenient and safe.

 

Double Bowl:

Advantages: double bowls, double functions.

Disadvantages: A single bowl is relatively small and can't hold large items.

 

Large double bowls can also hold large pots as long as the volume of the bowl is large enough. Can achieve the function of a large single bowl. The small bowl is used for water filtration, or install a water drying rack to wash fruits and vegetables.

 

The small double bowl is a bit inferior and can’t hold a wok or the like, but it’s still very convenient to have two bowls. The use of dual bowls saves time and effort and improves efficiency.

The double bowl originally has more functions than the single bowl, because most large double bowls will have accessories such as colanders and drying racks. It can be used in partitions, which is unmatched by a single bowl.

 

When washing vegetables, pots and pans, you can separate the two to avoid greasy vegetables. It can also be used separately when washing pots and pans alone. One sink for washing and one sink for draining water. And it can also save water.

 

One bowl for washing fruits and vegetables, and the other for washing dishes. 

 

The length of the double bowl is generally about 80cm. If the length of the counter is longer than 1.2 meters, double bowl can be installed. Many double bowls are designed as one big and one small. If you want to put the wok, the length of the large bowl should be more than 35cm, because the size of the wok is generally between 28cm-34cm. The disadvantage of the double bowl is that the sewer pipe is more complicated, and it is more prone to blockage and water leakage.

Therefore, if you choose a double bowl, it is necessary to buy a good strainer. If the inner wall of the drain is smooth, it is not easy to block. Some double bowls are equipped with threaded drain pipes, or relatively thin drain pipes, which tend to retain oil and cause unpleasant odors.

 

Above counter sink, under counter sink or one-piece sink?

Above Counter Sink:

All the edges of the sink are exposed on the countertop.

The cleaning of the above counter sink is very inconvenient. Over time, the glass glue on the edge of the sink will easily become moldy and black. The picture below may cause emotional upset, but the reality is always so cruel!

 

But its benefits are also very obvious, easy to install and cheap. And because edges are over the counter, the bearing capacity is very good. In case it is really disgusting one day and we can't stand it anymore, it can be easily removed as a whole. The space under the above counter sink is about 3 cm higher than the under counter sink. What does this show? It means that there is a large space under the sink for storage!

 

Under Counter Sink:

One wipe, everything is gone. The under counter sink is lower than the countertop. The water, residues, and vegetable leaves on the countertop will be in the sink with a single wipe. Super convenient. Generally speaking, the under counter sink is quite easy to clean. And it is very beautiful.

 

However, the installation of the under-counter sink is also more complicated. Not only do you have to prepare more installation costs, you also need to remind the decoration workers. Otherwise, it will generally be installed as an above counter sink.

 

In addition, once the under counter sink is damaged, it cannot be repaired and needs to be replaced as a whole. If the under-counter sink is used for a long time, the cracks will be moldy, so the mold-proof glue should be used between the under-counter sink and the countertop.

 

One-piece Sink:

Finally, the one-piece sink. One-piece sink refers to a sink that is an integral part of the countertop. It usually appears in the overall cabinet, and the countertop and the sink are seamlessly connected. The advantage is that there are no gaps, there is no need to worry about mold, and it is really easy to clean up. The disadvantage is that it is very troublesome to replace, which is equivalent to dismantling the entire counter.

 

In short, whether it is stone, stainless steel, or ceramics, whether it is a single sink or a double sink, it depends on the situation of your own house. As long as you choose the right material, bowl size and quantity, installation style, you can choose the best sink for your home.

1. Material:

The common faucet materials on the market today are: stainless steel, plastic, brass, zinc alloy faucet, etc. 

Brass:

Brass is the most common material for faucet manufacturing. It is made of international standard H59/H62 copper. The casting adopts steel mold for gravity casting, and its wall thickness is uniform, generally 2.5-3.0 mm. The faucet made of brass is characterized by: no rust, durability, anti-oxidation, and sterilization effect on water.

Zinc Alloy:

The density of zinc alloy is lower than that of copper, and the handle is lighter. The surface of zinc alloy is easy to oxidize from the inner wall, and white oxide powder will appear on the surface. The strength is much worse than that of copper. The service life is not long, and the lead content is high.  After one to two years, the faucet made of zinc alloy will oxidize and rot.

Plastics:

Plastic faucet has the characteristics of corrosion resistance, aging resistance, no rust, lead-free, non-toxic, odorless, high pressure resistance, light weight, easy construction, and low price. Plastic is not wear resistant.

Stainless Steel:

Now health and environmental protection has gradually become the new themes of modern life. Stainless steel is an internationally recognized healthy material that can be implanted into the human body. Therefore, kitchen and bathroom products with stainless steel as the main material have begun to become popular in European and American countries. 

More than 90% of high-end faucets are made of brass. Brass is the most suitable faucet material and has antibacterial effect. Among them, H59 copper is most used. Its lead content is qualified. H62 copper’s lead content is less and more corrosion-resistant. Although stainless steel can be lead-free, but the quality is worse than copper due to the complex process and no antibacterial performance.

2. Faucet Manufacturing Process:

Most of the faucets on the market under $20 are made of sand mold casting, which is commonly referred to as "sand foundry". The internal structure of the valve body metal is loose, and it is easy to form interior defects such as stomata. It may not be found in appearance. However, after a period of use, defects such as water leakage, inadequate sealing and even more severe defects will occur. High-grade faucets usually adopt gravity casting, and the internal structure of the valve body metal is dense. For the same valve body, the weight of the products produced by the two processes is different, and the consumption of materials is also different. The weight difference between gravity casting valve body and sand casting valve body is about 1/4. Therefore, the same product has different prices.

3. Cartridge:

The faucet is turned on and off every day. The cartridge determines the service life of the faucet. At present, ceramic is the most suitable material for home use. The high-end faucet cartridge mostly uses ceramic, which is durable and can be opened and closed for 500000 times without leakage.

 

4. Water Hose:

The water inlet hose of the high-end faucet adopts pure 304 stainless steel. 304 stainless steel can bear high water pressure and ensure water purity.

 

5. Aerator:

The aerator of high-end faucet can give users a very comfortable bathing feel. The use of these accessories and materials can ensure the quality of the product. And whether or not to use the NEOPERL aerator is an important factor in judging the quality of the faucet.

 

6. Surface Technology:

The electroplated surface of high-priced faucets usually has a mirror-like feel. When you press it with your finger, the traces of hand prints will disappear immediately. Moreover, advanced environmental protection electroplating technology can prevent secondary pollution of products and ensure the purity of water.

 

7. Service Life:

The quality of high-end faucets is still good after 5 years of use, and meet all the national water-saving requirements. The durability, water-saving and environmental protection are its highlight value. Cheap faucets have a very short service life. After two or three months of use, quality issue may occur. And their safety is low.

 

8. After-sale Warranty:

High-end faucets are produced by professional manufacturers with a comprehensive after-sales service system. No matter the product has an accident or failure, the manufacturer or distributor will be responsible for solving it at any time. The manufacturers that provides higher price products are mostly more qualified, and they are very concerned about sales and reputation generated by each product.

All Aquacubic products that are finished in the production department have to pass their inspection first. There will also be the special inspection personnel to conduct an additional inspection to ensure that every product delivered to consumers is qualified. 

Pink is considered the exclusive color of girls, and many people can't resist its unique tenderness and romance.

Pink is soft and compatible. It is a very versatile color. When used properly, it can add a unique texture to the space. It now occupies a very special place in home design.

For the pink bathroom space, how can it be decorated to be unconventional?

Combine Pink and Tiles

Worried that too much pink will look tacky? Then add the tile. The large pink walls are matched with tiles of different textures to make the bathroom richer, playful and unique.

Choose bright chrome bathroom accessories in the space to completely blend into the pink space. Towel bar, towel ring, storage basket, soap dish... a full set of configuration. Make the bathroom tidy and clean.

Pink Matches with Other Colors.

Pink is a very tolerant color. Green, which seems difficult to match, is combined with pink. A warm and cold mixed hue makes the space more fresh without any uncomfortable impact.

The sweet pink is matched with the black metal bathroom accessories. The calm black effectively neutralizes the sweetness of the large pink.

The black bathroom accessories with a strong sense of line give the space a sense of high quality.

Embellish the bathroom with pink, soft and not monotonous, elegant and vigorous. Let the space bloom with a different kind of charm.

Aquacubic Solid Brass Matt Black Concealed Overhead Rain Shower Faucet with Hand Shower. 

Waterfall shower head uses air pressure technology and can provide stable and powerful showers even at low water pressure.

Manufactured from premium material with outstanding corrosion resistant performance for ensuring high quality and better durability.

After the shower is turned off, the water still runs. Is it a quality problem?

Have you encountered a problem like this? After the shower was turned off, the water still ticked out. Sometimes after turning off for a long time, the water still flows out suddenly, and it flows fast. This is how it happened. Today, let's take a look at "The sudden water flow problem after the shower is turned off".

 

Regarding this problem, at first it was suspected that it was a shower quality problem. In order to clarify it, we also specially checked our showers, but this kind of situation still occurs. Later, we asked a professional to figure out that the water running after the shower was turned off was because of the water stored in the top spray and the shower pipe.

 

Professional explanation: In order to pursue the comfort of showering, the current shower head sprays are very large. The bigger it is, the more water there is after turning off the faucet. After use, the air pressure inside the shower is in equilibrium with the atmospheric pressure, so the water inside will not flow out temporarily. After some time, the water will flow out when the balance is lost. This is a problem with large-top showers. It is not that the shower is leaking or broken, so you can rest assured if you encounter this problem. If it is a constant dripping and leaking, then it is a quality problem.

 

So what should I do if the shower really leaks?

Analyze the factors of the shower leakage first. The main points are as follows:

 

1. The shower nozzle is blocked. If it is used for a long time, the water output will become smaller. If the water quality is not good, the water contains a lot of alkali, and scale deposits on the water outlet cause the shower to be blocked. At this time, it has to be resolved by the seller of the shower. Therefore, it is very important to choose a reliable seller.

 

2. Shower plating. Many people have found that the surface paint on the shower can peel off. It will be ugly after the paint is peeled off. If you have just bought a shower that has this problem, it will affect the appearance. In addition, some poor-quality showers will block because of paint falling off. So we have to take a closer look at the surface of the purchased shower for these problems.

 

When purchasing a shower, you must carefully observe whether the surface of the shower is smooth or not. If it is rough to the touch, it may be processed twice.

 

3. The material of the shower. Some showers are made of plastic or cast iron. The plastic shower head may contain a lot of waste material, and the service life will not be long. Of course, some hand showers that use plexiglass, ABS and other materials are still very good. However, it is not recommended that you choose the shower head made of cast iron, which is easy to rust. Many people who chose this shower are very regretful, because it didn't take long for it to rust. It's ugly, and it also blocked the water outlet and broke the entire shower. At present, the better material is copper. 

 

After knowing the reason, we can come to a solution. There are mainly the following solutions for leakage in the shower:

1. Leakage at the steering ball of the shower head. First unscrew the shower head from the steering ball ring, find the O-ring or similar seal inside and replace it, and then turn the shower head back. Just go to the original position.

 

2. Leakage occurs at the joint of the handheld shower. Select the right size shower hose and shower head according to the specifications, replace its rubber ring, and reinstall it.

 

3. Water leakage caused by gravel or sediment. Unscrew the shower head for cleaning. If necessary, soak the parts with vinegar and scrub the parts. Take care to avoid scratching it. If the shower head is an adjustable spray type, carefully check all movable parts for signs of excessive wear. If the rotating handle cannot move smoothly, the internal cam may be broken, and the entire shower head needs to be replaced.

 

4. The spray mode from the shower head becomes a mixture of spray and rain mode. If the shower is used for a long time, the water output will decrease. It may be because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet cause the shower to be blocked. It is also very simple to solve. For the shower head designed with silica gel particles, just gently knead it. If the scale is serious, you can put white vinegar in a plastic bag, wrap the shower and soak for some time, then rinse with water.

Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers. 

The products include faucets, sinks, basins, bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.

Look forward to cooperating with you.

Thanks a lot!

Buying a new bathroom sink faucet can be a challenging task. You have to consider many factors, such as installation, types, and finishes. 

Also, a wide variety of brands and faucets are available. The bathroom sink is a vital fixture, so selecting the correct faucet is essential. 

Here are the steps for how to choose a faucet for your bathroom sink.

3 Tips on Choosing a Faucet

1. Installation

If you want to switch from two handles to one, you have to think about the number of holes in the sink. 

Most sinks have three holes: one for the hot handle, one for the cold and one under the spout. 

Some single-handle faucets include a cover plate to hide the extra holes. But some don't, so check the label. 

If you currently have a “wide spread” bathroom faucet with two handles far from the spout, 

you can’t switch to a single-handle model.

2. Faucet Types

Ⅰ. Single-hole faucets combine the spout and mixing handles—often a single lever—into one unit that requires only one drilled sink hole. 

For retrofits, some models include a bottom plate that will cover existing three-hole openings. Single-hole faucets are ideal for smaller sinks, 

such as powder room baths. Their simplicity reflects modern sensibilities.

Ⅱ. Center-set faucets fit standard three-hole sinks (with outer holes drilled 4 inches apart). They'll have either a single lever or 

two handles mounted on a 6-inch plate. They're ideal for most bathroom sinks.

Ⅲ. Widespread mounts have three separate pieces: Two handles and the spout. 

The standard distance between the handles is at least 8 inches, and the three pieces tend to be larger than other types of bath faucets. 

Smaller versions, called minispreads, are designed for standard holes drilled 4 inches apart.

Ⅵ. Wall mount faucets have gained popularity along with freestanding or vessel-type sinks that require longer spouts 

that extend well over the top of the bowl. Not every faucet fixture can be easily categorized. Kohler, for example, 

makes a faucet that's integrated into a mirrored wall cabinet. 

All you see is the tiny flow control lever peeking out from the bottom of your mirrored self.

3. Faucet Finishes

Choose a finish that matches nearby cabinet hardware, towel bars, etc. Mismatches look bad. If you plan to replace existing hardware, 

your choice of faucet finishes is wide open. The vast majority of faucets have polished chrome, satin nickel or bronze finishes. 

All of these finishes are durable and keep their good looks for years. But some are more durable than others.

Chrome is the most durable finish and the easiest to keep clean-that's why it's always been the favorite 

for commercial kitchens and public bathrooms. If your faucet gets heavy use, it's your best bet for long-term toughness.

Nickel finishes are usually labeled “brushed,” “satin” or “stainless steel” and have a dull shine. 

They're durable but prone to fingerprints and water spots, so they're harder to keep clean. 

Some have a coating that reduces stains and smudges, but that coating isn't as durable as metal and may chip or wear.

Bronze faucets have a brownish tone and are often called “oiled” or “rubbed” bronze. 

But the surface is a coating (such as epoxy) rather than metal. 

This coating is tough stuff, but can be chipped or scratched more easily than metal.

Kitchen Bridge Faucet with Side Spray Available in more than 20 decorative finishes; Solid brass construction; Bridge-style brass valve bodies; See additional details ... Solid brass pull-out sidespray assembly; 8.32" (21.1 cm) spout height at outlet; 9.30" (23.6 cm) spout reach (c-c) For 8" (20.3 cm) centers; 1.8 GPM (6.8 LPM) Max;

Moen S72003SRS Paterson 1.5 GPM Single Hole Pull Down Kitchen Faucet.

CUPC hot selling TallStainless Steel Lavatory Faucet Bathroom Sink Faucet Basin Mixer …

Kingston has a large selection of Basin Tap Faucets in a variety of styles and finishes. Available in popular colors like Bronze, Black, Nickel, Bronze and Brass. Plus choose from Cross or Lever Handle options.

Pot Filler Faucet Pot Filler Faucet Aquacubic 2 Handles Single Hole Wall Mount Kitchen Pot Filler Faucet

Cassidy Wall Mounted Bathroom Faucet - Less Rough-In Valve and Drain Assembly - Includes Lifetime Warranty Available in 5 finishes

Plastic Bath Stools, Get suppliers, exporters, manufacturers and buyers of Plastic Bath Stools in India and overseas. Get contact details, email, phone and address of companies manufacturing and supplying Plastic Bath Stools along with details of Plastic Bath

Deck Mount Pot Filler Faucet,Chrome Finish with Extension Shank and 20" Dual Swing Joints Spout Deck Mount Pot Filler Faucet,Chrome Finish with Extension Shank and 20" Dual Swing Joints Spout ￡211.88 GBP ￡123.74 GBP Availability: In Stock Sku: S6115C Brand: Sumerain Add to Cart Description Reviews (11)