How to define accessible luxury?
It is not only a design style,
It is a high-style life philosophy.
It is prosperous in a minimalist place,
Elegance is not complicated, simplicity is not simple.
Accessible luxury is not simple. It has a variety of manifestations.
Warm, light and luxurious, noble and comfortable
A touch of orange brightens the whole space,
Match with gray tile floor and brown wall,
It highlights the high style of the whole space.
Nordic luxury, elegant style.
The main color is gray.
Large light gray marble walls,
Decorate the whole space with a piece of green plants,
With light gray bathroom cabinet,
It's bright and comfortable.
Simple, light and luxurious, elegant and advanced
To simplify, black and white color covers the whole space.
Spacious wall space,
Complete set of black bathroom Shower Faucet,
Not only meet the requirements of storage, but also decorate the bathroom.
A variety of accessible luxury bathrooms,
With unique charm,
More possibilities for home,
Bring luxury and elegant life enjoyment to the customers.
Buying a new bathroom sink faucet can be a challenging task. You have to consider many factors, such as installation, types, and finishes.
Also, a wide variety of brands and faucets are available. The bathroom sink is a vital fixture, so selecting the correct faucet is essential.
Here are the steps for how to choose a faucet for your bathroom sink.
3 Tips on Choosing a Faucet
If you want to switch from two handles to one, you have to think about the number of holes in the sink.
Most sinks have three holes: one for the hot handle, one for the cold and one under the spout.
Some single-handle faucets include a cover plate to hide the extra holes. But some don't, so check the label.
If you currently have a “wide spread” bathroom faucet with two handles far from the spout,
you can’t switch to a single-handle model.
2. Faucet Types
Ⅰ. Single-hole faucets combine the spout and mixing handles—often a single lever—into one unit that requires only one drilled sink hole.
For retrofits, some models include a bottom plate that will cover existing three-hole openings. Single-hole faucets are ideal for smaller sinks,
such as powder room baths. Their simplicity reflects modern sensibilities.
Ⅱ. Center-set faucets fit standard three-hole sinks (with outer holes drilled 4 inches apart). They'll have either a single lever or
two handles mounted on a 6-inch plate. They're ideal for most bathroom sinks.
Ⅲ. Widespread mounts have three separate pieces: Two handles and the spout.
The standard distance between the handles is at least 8 inches, and the three pieces tend to be larger than other types of bath faucets.
Smaller versions, called minispreads, are designed for standard holes drilled 4 inches apart.
Ⅵ. Wall mount faucets have gained popularity along with freestanding or vessel-type sinks that require longer spouts
that extend well over the top of the bowl. Not every faucet fixture can be easily categorized. Kohler, for example,
makes a faucet that's integrated into a mirrored wall cabinet.
All you see is the tiny flow control lever peeking out from the bottom of your mirrored self.
3. Faucet Finishes
Choose a finish that matches nearby cabinet hardware, towel bars, etc. Mismatches look bad. If you plan to replace existing hardware,
your choice of faucet finishes is wide open. The vast majority of faucets have polished chrome, satin nickel or bronze finishes.
All of these finishes are durable and keep their good looks for years. But some are more durable than others.
Chrome is the most durable finish and the easiest to keep clean-that's why it's always been the favorite
for commercial kitchens and public bathrooms. If your faucet gets heavy use, it's your best bet for long-term toughness.
Nickel finishes are usually labeled “brushed,” “satin” or “stainless steel” and have a dull shine.
They're durable but prone to fingerprints and water spots, so they're harder to keep clean.
Some have a coating that reduces stains and smudges, but that coating isn't as durable as metal and may chip or wear.
Bronze faucets have a brownish tone and are often called “oiled” or “rubbed” bronze.
But the surface is a coating (such as epoxy) rather than metal.
This coating is tough stuff, but can be chipped or scratched more easily than metal.
Many years later, people who use black frame shower doors and windows will surely be grateful for this choice.
The black frame has always been loved by people because of its beautiful industrial style. We believe that it is only a matter of time before people find the elegant beauty of a bathroom with black frame shower doors and windows. Black-framed doors and windows made of aluminum or steel look very beautiful in the factory. Whether it is used in the bathroom or other places, it will receive fascinating results. Let's directly look at 8 display pictures that reflect the advantages of black frame shower rooms. I believe there is always one suitable for you.
1. Black frame bathroom doors and windows are the eye-catching emperor of the decoration industry!
Even with Karaka marble floors and expensive dressers decorated with quartz, the star of the bathroom is still the brass shower head and black aluminum bathroom doors and windows. If you are looking for exquisite bathroom decoration, it is really black framed doors and windows.
2. The black frame shower room doors and windows give a unique industrial style.
A black framed shower door with coverless lamps and a modern yellow dressing table can create an attractive industrial atmosphere. The high glass window design not only facilitates daylighting but also ensures privacy.
3. The black frame doors and windows show the beauty of elegance.
When the black frame doors and windows reach the roof directly from the ground, they can make the small room look taller than it actually is. Matched with herringbone parallel pattern floor tiles, a small white marble dressing table and a tall dressing mirror. The overall effect is so elegant and restrained.
4. The black frame shower room makes the large white areas appear clearer.
White floor tiles + white bathtub + white sink, the bathroom can easily become monotonous. At this time, we can use black frame shower room and black hexagonal tiles in the shower room to enhance the contrast with the white environment, making the whole room more layered and three-dimensional. Finally, brass showers, brass faucets and geometric chandeliers are used to make the finishing touch.
5. The black framed doors and windows make the walk-in shower room stand out.
An open shower saves space in a small space. It is hard to imagine how elegant a shower room with framed doors and windows is! Due to the good closure of the black frame doors and windows, the slate wall panels and the mosaic wall tiles on the upper wall embellish them, the whole shower room is like a small room fully decorated.
6. A shower room with a black frame is simply too modern.
Patterned floor tiles, black framed shower doors and windows, and a black dressing table, one of the countless bathrooms in London, looks perfectly adapted to the urban environment in which it is located.
7. The black frame shower room can be easily connected with different styles.
Hesitating between your favorite pastoral style, industrial style and modern style? The black frame shower room will help you solve it! It can act as a bridge between styles, helping different style elements to seamlessly match together.
8. The black frame shower room are timeless decorations.
The black frame shower room may only be fresh for a short period of time, but it does not mean that it will soon become obsolete. This is a decoration with permanent vitality. Especially when paired with other classic elements, like mosaic tiles, subway tiles and some traditional decorations, the black frame shower room has a simple yet elegant charm.
Thanks for viewing our website. Hopefully you can find your interested items. Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business. We are one-stop supplier of bathroom and kitchen products.
Everyone's expectation of the bathroom is nothing but clean, bright, well-ventilated, and no odors. However, in real life, we will find that not all apartment types have such conditions.
For example, in some bathrooms without windows, various problems such as stuffiness, darkness, dampness, and stink are combined. So, since the house-type cannot be changed, is there a better way to save such a bathroom? Today we will share a few tips, maybe you will get some reference from them.
Ventilation of the bathroom is the top priority. If there is no fresh air in, it will not be able to replace the air inside. And it will be easy to breed more bacteria, causing the bathroom to be smelly and damp.
Generally we will install exhaust fans, together with the ventilation pipe to exhaust the air, and then let in the fresh air from outside.
However, the air volume of the exhaust fan is very small and can only achieve partial ventilation. If the air problem in the bathroom is serious, then a better fresh air system should be installed to continuously provide fresh air to achieve real air circulation.
In view of the problem of insufficient lighting in the bathroom, there are actually many small coups. For example: In addition to the main light on the top, you can also add auxiliary lights.
It is a very practical way to use a large mirror + mirror front light to supplement the light source. One can produce uniform light, ensuring that every dark corner can be filled with light. Secondly, it is also helpful to washing and cleaning, to maximize the using of lights.
Moreover, the use of pure white tiles, plus the transparent glass partition, can solve this problem well. Visually improve the lack of light.
When decorating the bathroom, whether it is installing the basic sewer pipe, or the toilet, washbasin or faucet, careful testing and inspection must be carried out to prevent water leakage and trouble to daily use.
In order to prevent water leakage as much as possible, we must conduct the necessary closed water test after coating the waterproof material. In addition, try to buy high-quality floor drains, water pipes and hardware to ensure the comfort and cleanliness of the bathroom.
Of course, if you are diligent in cleaning, wipe off the water and stains on the countertop in time, and then use the heating and ventilation functions of the bath heater to remove moisture. Your home must be clean and refreshing.
Fully enclosed toilets are most likely to cause stinks. If the bathroom at home is comparable to a "public toilet", what kind of experience will it be?
In fact, the problem of deodorization can be basically solved by achieving waterproof and ventilation. But at the beginning of the decoration, one thing that cannot be ignored is the use of U-shaped sewer pipes to form a water seal to eliminate the odor from the source.
In addition, after using the toilet, close the toilet and flush the toilet in time, and clean up the floor drain and debris in time, all of which can play a role in eliminating odors to a certain extent.
05. Dry and Wet Area Separation
Nowadays new houses generally do the necessary dry and wet function separation. Use glass or other partitions to separate the dry area from the wet area, and eliminate a series of hidden dangers during use.
But the old house does not have "dry and wet separation", so it is often separated by a shower curtain. Such an approach is of course better than nothing, but not only can it not effectively isolate water vapor, but it will also easily multiply bacteria. Humidity and odor are inevitable.
If space conditions permit, you might as well install a light tempered glass, or open a small window above the wall. After communicating with neighbors and property, improve the bathroom environment at home.
However, due to issues such as building spacing and bathroom orientation, the actual operation is still relatively difficult.
In fact, no matter how good the original conditions are, and no matter how clean and fresh the bathroom is, if the people who live in it have bad hygiene habits and pile up clothes and sundries in it, the bathroom environment will not be good! If you want to get rid of the distress caused by the bathroom, you must be a diligent cleaning person. With the several solutions provided above, we hope to help you who have windowless bathrooms.
As a manufacturer of sanitary products for more than 11 years, we have seen many customers whose bathrooms are really full of functions. Although it is small, the functions are still very diverse. Have to admire!
Modern decoration requires both practical functions and individual style, so the budget is often difficult to control. The bathroom space usage rate is high. If you can save it everywhere, rework and repair will occur, and the gains will outweigh the losses. At the same time, the cost of furniture and decoration can also be spent more or less. The following are some small details on the bathroom decoration, which can save costs time and time again!
1) Waterproofing is essential for walls.
Waterproofing in the bathroom is very important, not only to choose high-quality materials, but also to ensure professional painting. The wall waterproof in the wet area should be at least 180cm above the ground and 50cm for other places. The ground waterproofing generally needs to be brushed twice and a 24-hour closed water test should be carried out. Wall corners, water pipes, etc. should also be carefully done.
Ceramic tiles are the highlight of bathroom decoration. And the wall area is large. You can choose relatively economical tiles to ensure the waterproof performance. You can also directly paint with waterproof paint where it is not in the shower area. It will reduce cost.
Mosaics with rich patterns can enhance the visual aesthetics of the space. And to reduce material costs and manual laying costs, mosaics can be laid only on key positions. Tiles, waist line and top line can be selected according to your own needs to control the cost of decoration.
The original light-body wall is removed and replaced with a transparent glass wall, which expands the visual area of the space and also saves costs.
Mosaic paving requires a high labor cost, so you can find a large mosaic-like wall tile to pave the wall, which can save a lot of money. Since there are fewer gaps between large-size mosaic tiles, the amount of caulking agent is correspondingly reduced, which is often used for reference and selection in home decoration.
2) The floor area should be beautiful and non-slip.
Safety should be placed in the most important position, and slip resistance should be considered in the selection of floor tiles. At the same time, the human body will directly touch the ground, so the quality of materials should be paid attention to. Bright floor tiles are relatively slippery, so use them as little as possible in the bathroom, and use matte floor tiles or tiles with good anti-slip properties.
When paving the floor tiles, the slope must be appropriate, and the floor drain must be the lowest point so that the water can flow smoothly. The floor tiles should be made of whole tiles as much as possible, and the gap between the tiles should be controlled at about 2mm.
The area of decorative tiles on the ground is smaller than that of the wall. The use of interval paving can save the budget, and only use the same pattern of tiles to be separated by more than one tile.
If you want to create a low-cost bathroom with a natural texture, you can use wood-grain tiles instead of waterproof solid wood, which also has the characteristics of natural patterns, elegant colors, and easier matching with other sanitary wares.
Paving decal tiles in the bathroom can improve the monotonous bathroom style. In the actual construction process, the cost of laying decal tiles is much cheaper than mosaic.
When special-shaped handmade tiles are laid on the ground, they should be from the inside out, the gap between the tiles should be controlled within 8mm, and the height of the caulking agent should be level with the tiles. The paving of this kind of tiles should be carried out in sequence according to the serial number on the back to avoid waste caused by rework.
3) Cleverly arrange the exposed and concealed sanitary ware.
The bathroom is a place where multiple channels of water and electricity converge. In the early stage of renovation, it is necessary to choose quality water pipes, wires, etc. And the wiring must comply with the regulations to avoid water leakage due to design and material selection problems.
As the space expands and functions increase, there are more and more electrical appliances in the bathroom. If you want to install smart toilet lids, integral shower rooms, massage bathtubs, multi-functional bathroom cabinets, etc., you must first make the sockets during the decoration to avoid rewiring in the future and increase the trouble.
The plumbing renovation of the bathroom is most laborious. If you want to save this part of the cost, the pipeline must be open-lined, without slotting, and future maintenance can also save a lot of costs.
In addition, avoid excessive wiring when rebuilding waterways and circuits. Use multi-hole sockets as much as possible on the panel of the socket. Under the premise of the same number of wires, you can plug in more electrical appliances. The wiring of the space is reconstructed with open wires, and the wires are routed from the top. The outer wall of the pipe is painted with waterproof paint, which saves a lot of labor costs and is also convenient for maintenance.
The bathrooms are uniformly decorated in black and white tones, simple and generous. The upper and lower water pipes of the sanitary ware are made of metal material, which has a long service life and is not easy to be damaged.
The space matching has been cleverly designed. The cement wall is matched with solid wood floor tiles, which is elegant and warm, satisfying practical functions and beautiful.
4) Shower Area
The quality of the glass used in the shower room is closely related to the safety of the bathroom. Fine tempered glass is generally difficult to break, and it will not hurt people when broken. Therefore, when choosing, don't be greedy for temporary cheapness, and try to choose high-quality, well-reputed brands.
The frame of the shower room is usually made of aluminum alloy, and the surface is sprayed with plastic, so it is not corroded or rusty. The thickness of the main frame aluminum alloy is preferably 1.1mm or more, which is not easy to deform.
In addition to professional brand shower rooms, the shower area can also be separated from dry and wet areas with various partitions. Common glass partitions only need to be installed on one side when combined with the wall, which saves costs by using less materials.
At the same time, the installation of the shower room can be omitted. The base of the shower room mainly plays the role of heat preservation and drainage, and the material is mostly acrylic.
The shower area is separated by a glass wall, and the ground is transitioned by steps to create a semi-enclosed shower space. The glass partition is directly fixed with hardware without reaching the top, which gives the space better permeability.
A wall serves as a partition, separating the wash area from the shower area. The interior of the wash area is covered with ceramic tiles, the exterior is painted with waterproof paint, and the key parts are strengthened.
5) Wash Area
The floor drain is most commonly used for sink, and the wall mount type can be used for more advanced spaces. It is best to have all S-bends to prevent upward odor. Basins are divided into above-counter basins, under-counter basins and wall-mounted basins. Above counter basins for households are more suitable and easy to install. The under counter basin is suitable for a large area bathroom, and the installation is relatively complicated.
Small-space or low-budget families can abandon the overall bathroom cabinet, and use a transparent iron frame to save space and leave more space for the legs. Mirror cabinets and recessed cabinets are more suitable for small spaces and complete the storage function of the bathroom. To reduce the cost of decoration, you can choose a single color and simple style in the decoration, and match it with retro copper-colored, metal-colored faucets or mirror lights to create highlights.
Build the washstand with cement, and place storage baskets underneath. The wall-mounted faucet is highly decorative, but the size must be measured accurately in advance, otherwise it cannot be installed, which will affect the use.
There is no special furniture under the basin; only metal racks are used to save costs and place toiletries.
Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We have rich experience and passion in bath and kitchen industry and appreciate your contacting and business. Look forward to cooperating with you. Thanks a lot!
In daily life, the planning of the bathroom is very important. A space of a few square meters has to bear a lot of sanitary ware and electrical appliances, such as toilets, bathtubs, washing machines, clothes dryers, etc. These are essential equipment that can improve the comfort and convenience of life.
The three-square-meter bathroom is also the size of most apartment bathrooms. The space is not large, but it does not affect people's pursuit of quality life. How to make good use of small space and achieve the aim of practical and beautiful appearance ? There are many ways.
01 Extend the sink counter to the washing machine and get an extra storage table.
If the area of the sink counter is relatively wide, you might as well design the washing machine and sink counter as a whole. By the way, the upper part of the washing machine is also designed as a countertop, which has an extra space for display. The whole area be neat and decent.
A large sink is exactly what women need. They have too many skin care products and cosmetics to be placed.
Suitable for: single women, or small families.
Advantages: The upper part of the washing machine is fully utilized and many things can be placed.
Of course, if you want to pay attention to some design sense, you can design the washing machine and the sink in a staggered layer, showing a patchwork of beauty, and it can also bring a unique atmosphere to a small space.
02 The washing machine and the storage cabinet coexist harmoniously, and one thing is multi-purpose and takes up less space.
If there are many things in the house, consider using more storage cabinets in the bathroom. But in a small space of three square meters, how should the washing machine be placed?
The washing machine, storage cabinet, and sink can be designed as a whole, and the three can use each other to realize their own value, visually beautiful, form a multi-purpose, and occupy a small area.
Suitable: Families with lots of things.
Advantages: One thing is multi-purpose, and it occupies a small area.
03 Maximize the use of corner space
There is always an unexpected room type of an apartment, such as a three-square-meter rectangle, but it happens to be faced with the problem of a lot of things and a lot of demand. The washing machine and the cabinet need to be put in the bathroom. How to achieve it ?
Three walls can be used. The storage cabinets, sinks, and washing machines leaning against the wall can perfectly maximize the use of corner space.
Suitable for: families who have many things and pay attention to space design.
Advantages: The smallest space is used to the maximum.
04 Storage rack: Use the height of space to realize vertical storage.
Different room types and different residents have different requirements for the placement of washing machines. Some people like simple display. Easy to take things, and easy to move the washing machine. In fact, a storage rack can solve all the troubles. The storage rack is light and convenient, and there is no construction problem. You only need to place it in a suitable position, put daily necessities on it, and put a washing machine underneath it to achieve a perfect plan for a small space. This is also a way to achieve vertical storage, which saves more space.
Suitable for: Singles with less things and high requirements for the convenience of life.
Advantages: easy to move, easy to clean, and less costly for decoration.
It is not difficult to stuff a washing machine in a three-square-meter bathroom. The key is to design in combination with different room types. In addition, the living needs and actual conditions of different residents must be considered to create a comfortable and practical bathroom space.
Aquacubic Has Rich Experience and Passion in Bath and Kitchen Industry. We can provide total solution for apartment projects.
Speaking of bathroom, the first thing many people think of is that we must separate wet and dry functions. After all, the traditional integrated type is too inconvenient to use. The bathroom is always wet, and even the towels have a musty smell. With the improvement of people's living standards, more and more people hope that the bathroom can be truly hygienic.
Three-way separation, that is, the basin area, shower area and toilet area are completely separated.
Advantages of three-way separation:
First, each washing area is an independent space, ensuring privacy while isolating smell and humidity;
Second, improve safety, especially for families with the elderly and children, and reduce the possibility of slipping due to water in the bathroom;
Third, ensure the cleanliness of the bathroom, and extend the service life.
How to create a three-way separation for a 3 square meter bathroom?
As soon as you enter the room, it is the washing area, which is the most frequently used area in the entire bathroom, so placing it at the door does not affect the use of other areas.
The middle position is the toilet area. The small toilet is separated by a baffle to form an independent space. If you feel that it is not private enough, you can install a small shower curtain to completely separate the toilet area. This is generally not recommended. After all, it affects the appearance, and it also gives people the feeling of being cramped.
The square space uses all the walls. A few niches or horizontal partitions are placed on one end of the bathtub to hold bath towels and clothes. The bath area is designed in the innermost part, the edge of the bathtub itself is an isolation belt, and the shower head is installed on the wall at the other end of the bathtub, which is convenient and does not take up space.
Although the square space is not very easy to handle, it can be regarded as "excellent brushwork" through this elaborate design.
Compared with a square bathroom, a rectangular space will make the best use of everything.
The same is the wash area next to the door. The difference is that the rectangular space also has a place to put the washing machine. When you take a shower, you can throw your clothes into the washing machine.
Placing the toilet and shower in parallel on the innermost side and covering the tub with a shower curtain.
The above are two designs of 3 square meters bathroom. Of course, there are more design styles, such as a sliding folding door instead of a shower curtain.
This folding door design not only saves space, but also has good privacy. Very practical.
With some simple lighting, the bathroom can also be a beautiful scenery.
The barn door design completely separates the bathroom area.
A small bathroom doesn't necessarily need a bathtub. But if removing the wall partition and replace it with a shower curtain, there will be bathtub area.
The shower room can be placed in the triangular area at the corner of the bathroom to form a fan-shaped area, which is the most space-saving.
It is best to use a small size. After all, if the toilet is too big, it doesn't seem to be of much use except for taking up space.
What are the precautions for the three-way separation?
Because the space is relatively small, the tones of the floor tiles and the walls should be matched reasonably. It is best to focus on warm colors, which are swelling colors. They have the effect of "expanding" the space.
Try to choose a mirror as large as possible. The role of a large mirror is the same as the color tone, which increases the sense of space.
The corners must not be wasted. Simple wooden shelves and niches are good storage methods.
The last thing we must pay attention to is ventilation. It is important to reduce odors.
The U.S. home furnishing internet platform HOUZZ recently released the "2019 U.S. Bathroom Trends Research" report, which was conducted for 1,360 owners who refurbished bathrooms in the U.S. The survey results show that in the past year, 88% of respondents have changed the faucet, 83% of the respondents have changed the shower, and 63% of the respondents have changed the toilet. Among them, American owners have shown great interest in products such as large-size showers, smart toilets, and customized bathroom cabinets, and they are more generous in their decoration costs than in previous years.
Water-saving faucets, large showers, smart toilets, custom bathroom cabinets...According to the survey report, the largest number of American owners who renovated their bathrooms in the past year have replaced faucets, accounting for 88% of the respondents. Excluding non-bathroom products, showers (83%), basins (78%), bathroom cabinets (77%), toilets (63%), bathtubs (34%), etc. are followed in order.
More than 80% of the interviewees have replaced the faucet and shower.
In 2019, the faucet was the sanitary product that was replaced by the most American owners, accounting for 88% of the 1,360 respondents. Among them, 33% used water-saving faucets, 16% upgraded sensor faucets, and only 3% continued to use traditional faucets. Among the owners who have replaced the shower head, 57% have replaced the shower system, and 54% bought a larger shower head, 45% have changed the shower layout, and 43% have changed the wall of the shower area .
Large showers are more popular.
The selection rate of smart toilets in American households has risen from 28% to 34% this year. Among the many functions of the smart toilet, self-cleaning is the most popular, followed by hip wash, seat heating, splash water, night light, induction and automatic deodorization. American owners of bathtubs have increased the selection rate of flat-bottomed freestanding bathtubs from 41% last year to 50% this year, which is significantly ahead of mosaic bathtubs (21%), wall-mounted bathtubs (15%) and cat-foot bathtubs (9%). In terms of bathtub materials, acrylic, fiberglass, and enamel cast iron are the most popular in order.
In general, Americans value convenience, comfort, and storage more when replacing sanitary products. This is reflected in specific products. Products such as sensor faucets, smart toilets, flat-bottom bathtubs, custom bathroom cabinets, and double mirrors are becoming more and more popular. China manufacturers that export to the United States can make more efforts in these products.
In addition to products, spatial transformation is also the focus of this investigation. Among the 1,360 respondents, 45% believed that they would relax in the bathroom. They believed that the cleanliness, bathtub, and lighting of the bathroom would help increase the relaxation function of the bathroom. In terms of bathroom style, the most favored one is Transitional. The number of people who choose this style has increased from 16% in 2018 to 21% in 2019. Modern style is also very popular, with a selection rate of 20%, an increase of 5 percentage points from last year. On the contrary, the contemporary style and traditional style continue to fall out of favor, with the selection rate of 16% and 9%, down 4 and 5 points from last year. Finally, the popularity of Farmhouse in the United States is still low.
Transitional style is favored.
In terms of color, the slightly quiet white last year has a trend of recovery. In areas such as bathroom cabinets and counter-tops, most owners choose white. On the floor and wall, the selection rate of white also increased by 3 points and 6 points, reaching 19% and 27%. Especially on the wall, white began to challenge the dominance of gray.
White has a trend of recovery.
For the walls and floors in the shower area, more than half of the interviewees chose ceramic tiles, which is far ahead of marble, granite, slate, and travertine.