











Towel bar: Towel bar is used to hang towels. The installation position is generally a position closer to the bath, and the installation height is generally 1.4 to 1.6 meters from the ground. The installation height should not be too low, otherwise the towel will get wet when bathing. The installation methods of the towel bar can be summarized into two types, one is to install without punching and the other is to install with emptying. Hole-free installation methods generally include vacuum suction cup type and watering type. Screws are generally used for drilling holes. Nowadays, many families prefer the non-punch vacuum suction cup installation, because it is easy to install, fast, and does not require much effort when disassembling. It does not cause any damage to the wall, but after a long time, it is easier to loose and fall off. The fixing force is not as strong as screwing. The watering type, as the name implies, is fixed on the wall with nail-free glue. It takes more time to install, but the cost savings are better than others.
Towel rack: The towel rack is used to place bath towels. The installation location is next to the towel bar or in an open position in the bathroom. You can design the installation location according to the characteristics of your own bathroom. The length and width of the bath towel are several times that of the towel. The height of the installation is naturally higher than that of the towel bar, but it mainly depends on the average height of the family members.
Toilet paper holder: The toilet paper holder is used to place toilet paper. It is generally installed next to the toilet. The installation position should be lower than the toilet. If it is installed higher than the toilet, you can imagine how inconvenient it is.
Toilet brush holder: The toilet brush is generally installed next to the toilet, and it is recommended not to install it next to the toilet paper holder. The toilet brush usually contains bacteria when cleaning the toilet, and then the air around the toilet brush has many bacteria, and the bacteria are easy to adhere to the paper towel.
Storage basket: The storage basket is generally installed near the shower, and is used to place items such as shower gel and shampoo for easy bathing. The installation height is generally one meter two to one meter four. These are just for reference, and are of no practical use. You can design according to your own habits and believe in yourself.
Clothes hook: The characteristics of stainless steel clothes hooks are reflected in high temperature and low temperature resistance according to physical properties, and corrosion resistance and not easy to rust according to chemical properties. They are expensive and expensive, and are suitable for bathroom use. Space aluminum clothes hooks are characterized by not easy to fade, good environmental performance, not easy to rust, and easy to dye. The clothes hooks made of space aluminum materials on the market are rich in colors, strong in decoration, and low in price. The disadvantage is that the pressure resistance is weak. Not suitable for hanging heavy objects, suitable for various places. The copper clothes hook itself has high material density and good stability, so it is not easy to rust, resists pressure and is heavy, and is more expensive in the market. It is suitable for kitchens, living rooms and other places. Aluminum alloy is made of pure aluminum with some alloying elements, so aluminum alloy hooks are slightly better than space aluminum hooks in terms of performance. Zinc alloy is an alloy formed by adding other elements based on zinc, so zinc alloy clothes hooks are characterized by good manufacturability, long use time and easy cleaning. Wooden clothes hooks have low immunity to humid environments, poor physical properties, but strong decoration, suitable for living rooms, bedrooms, study rooms and other locations. Plastic clothes hooks are easy to mold, so most of the plastic clothes hooks on the market are not only highly decorative but also low-cost. The disadvantage is that the surface is not resistant to dirt and it is inconvenient to clean.
When we buy, we must consider the actual situation at home. Choose the right size and the required rack. Don't buy the package blindly. Some things may not be useful.
Don't think that after the new house is renovated, it will be as pleasing as the propaganda album. After the new house is renovated, a large amount of decoration waste will be generated. Dust, stains and marks from the decoration will be left on the walls and glass. Just like a baby who was just born, she will have a cute appearance after washing and putting on clean clothes.
Cleaning the newly renovated new home is an important task after decorating the new home. It is also the most laborious task. Facing a messy and unstructured new home, you don’t know where to start. Summarize the first cleaning experience after the renovation. We hope it will be of reference significance to you.
01 Cleaning Service
Those who are clueless about the cleaning of a new house can choose the cleaning service of a housekeeping company. Housekeeping companies have their own routines and tools for cleaning work. It is also a way to hand over professional cleaning work to them. The premise is to choose a qualified and high-quality housekeeping company. Services include: house dust removal, cleaning up decoration garbage, wiping glass, cleaning the floor, decontamination and disinfection of kitchen and toilet, cleaning up decoration traces, etc.
Notes on cleaning service
1. Organize a list of cleaning precautions, and list some areas that need special cleaning to avoid omissions. The decoration materials of each family are different. It is necessary to tell them some precautions, such as which places and areas cannot use water or chemical cleaners. These need to be communicated clearly with the housekeeping company before starting work.
2. Clearly state the materials of walls, floors, furniture, etc. that need to be cleaned, and let the staff prepare appropriate cleaning tools.
3. Communicate clearly about the tools needed for cleaning, which are brought by the staff and which are prepared by us.
4. Communicate clearly on the disposal method of the cleaned up waste, whether to throw it away or keep it somewhere.
5. Supervision, including whether to do a good job in dust prevention and cleaning of dead ends.
02 Clean Up by Yourself
Some people are unwilling to hand over their new homes to strangers to clean up, so they do their own cleaning work. Cleaning in person is nothing more than two things: preparing tools and clarifying the order of cleaning.
Preparation of Tools:
1. These will be used to clean the wall.
Small brush, sandpaper (to polish the paint on the wall), shovel, glass spatula, wet paper towel (to wipe the wallpaper), ladder.
2. These will be used to clean the ground.
Vacuum cleaner, mop, broom, nano sponge, rag (use a discarded old bed sheet; the size can be cut at will. It is big enough), dust cover, garbage bag.
3. Protective Equipment
Shoe covers, gloves, aprons, masks.
4. Cleaning Utensils
Detergents, maintenance agents, disinfectants, glue removers.
Cleaning Order:
Cleaning follows the order from top to bottom and from the inside to the outside.
Start cleaning from the room first, and then go to the kitchen and living room. The bathroom can be placed last, because the bathroom is a place where water is used repeatedly during the cleaning process.
Like kitchens and bathrooms, where there are wall tiles, they need to be cleaned from top to bottom to clean up the gaps in the tiles and the paint spots and glue stains on the surface.
03 Cleaning Techniques
During the decoration process, many traces of material adhesion will be left, and some cleaning skills are required.
Tape print: Use a damp cloth to wet it for a while before wiping.
Paint traces: Use paint remover or turpentine.
Marker marks: Wipe with a rag or damp paper towel with some alcohol.
Tile stains: Use special detergent for tiles to clean, paint and drawing pen fluid can be cleaned with turpentine, pyruvic acid or alkali.
Cement on glass: If it is a small cement stain, wipe it with a damp cloth and then scrape it off with a spatula. If it is a stubborn and large cement block, you can use the toilet cleaner to remove it. The effect is very good.
Tips: The toilet cleaner is acidic. Wear gloves when using it and don't think that the toilet cleaner is effective in removing cement and use it on tiles and marble floors. In addition, do not use alkaline soap at the same time when removing the cement on the glass.
04 Cleaning Can Be Done Separately.
In fact, if the new house cleaning work is done step by step during the renovation process, the subsequent cleaning will not be so laborious. Separate the cleaning work to these renovation steps:
1. After the water supply line and electricity are completed, and the walls and ground are leveled, the whole house can be cleaned and clean up the discarded decoration garbage.
2. When laying tiles, remind the workers to wipe off the cement stains on the surface of the tiles after laying the tiles.
3. After painting the wall and floor, you can clean it again.
If you have other new house cleaning experience, please leave a message to share with us.
This article introduces the three main components of the faucet. It will help you to understand the quality and material of faucets we use everyday. Uncover all the mysteries of the faucet.
Part 1: Composition
The three most basic components of a faucet: main body, plating and cartridge.
01 Main Body
The main body is the torso part of the faucet. The water flows in and out of the main body all the time. So the material is important. It determines the water quality.
Copper Alloy Faucet
Copper alloy is currently recognized as the most suitable main material for home use faucet, and the mainstream is brass. On the one hand, copper has good machinability, fluidity and formability. On the other hand, because copper ions have a bactericidal effect, they can kill super bacteria such as MRSA within 30 minutes and prevent the bacteria from producing antibodies. The inner wall of the copper faucet will not breed bacteria and become the most suitable carrier for "water".
According to different proportions of copper content in copper alloys, copper alloy materials can be divided into 52, 55, 59 and 62 copper. Among them, 59 copper is the best. The content of copper metal is 58%-60%, the content of lead metal is 0.08%-0.2%, and the content of other elements is about 2%. The remaining metal is basically zinc.
Because lead metal will precipitate when water enters the faucet, it will pollute the water. If the lead content is too high, it is harmful to the human body. Therefore, some brand faucets use low-lead copper, that is, the lead content is less than 0.1%. In view of the fact that it is difficult for general consumers to judge the lead content, it is recommended to choose a faucet with a clear mark that uses low-lead copper.
Zinc Alloy Faucet
Zinc alloy is an alloy based on zinc and added with other elements such as aluminum, copper, magnesium, cadmium, lead, and titanium. Zinc alloy is easily corroded in water. After being corroded, the metal will be mixed into the water and cause harm to the human body. The biggest advantage is probably the low price.
Stainless Steel Faucet
The main components of steel are iron and carbon. Ordinary carbon steel is easy to rust. Adding chromium, nickel and other metals to carbon steel can make the steel corrosion resistant. Therefore, the most important factor affecting the corrosion resistance of stainless steel is the content of chromium.
Stainless steel has the advantages of acid resistance, alkali resistance, corrosion resistance, and no release of harmful substances (lead). But compared with copper, it has one of the biggest drawbacks, that is, it does not have antibacterial function.
Brief Summary
If the budget is sufficient, choose low-lead copper faucets. If you can't identify whether it is low-lead copper, choose a product from a big brand.
If you have a small budget, you can choose stainless steel faucets. The price will be cheaper. However, relatively there will be some problems. In particular, we must choose products from high standard manufacturers. After all, it's about your own health, don't be greedy for cheap.
02 Plating
The faucet is used in a humid environment, and its surface requires a good finish. The common surface treatment method on the market is electroplating, mainly including chrome plating, nickel plating, titanium plating and so on. In addition, there are some rarer methods such as baking varnish, porcelain, and imitation gold electrophoretic paint.
Chrome
Chrome plating is the most common faucet plating. Chromium is a white metal with a bluish color, which has high hardness and wear resistance. Its hardness exceeds even the hardest quenched steel, second only to diamond.
Chromium is not easy to change in a humid environment and can maintain the surface gloss for a long time. With a silver appearance, chrome-plated faucets are more popular with consumers.
Nickel
Nickel can quickly form a very thin passivation film on the surface of the faucet. Can resist the corrosion of water vapor and certain acids. Has excellent corrosion resistance and stability. Can resist the corrosion of water vapor and certain acids. Therefore, the stability of the nickel layer in a humid environment is very high.
Titanium Alloy
Titanium alloys are made by adding aluminum and tin elements or aluminum and vanadium elements to titanium. Electroplated titanium gold has the advantages of high strength, low density, strong toughness and good corrosion resistance. The surface of the titanium-plated faucet is as smooth as a mirror. Its golden luster looks elegant and rich, and very decorative. However, the process of plating titanium gold is complicated. It is very easy to absorb impurities during thermal processing. Therefore, the yield is low. The cost is also higher.
Baking Varnish
Baking varnish is to put two layers of coating on the faucet. Each time the paint is applied, it is sent to a dust-free constant temperature baking paint room for electric heating or far-infrared high temperature baking.
The surface of the baking varnish faucet is smooth and shiny, which can present a visual texture similar to that of a piano, making the whole product look very high-grade. However, compared with other surface treatment methods, baking varnish faucets are more prone to surface peeling. The durability is not as good as the traditional chrome-plated faucet. This method is not widely used.
Brushed
This treatment will make the surface of the faucet visually rough. However, it is quite delicate to the touch, showing a restrained beauty. The brushed process mainly relies on mechanical friction to produce several common textures such as straight lines, chaotic lines, threads, corrugations, swirling lines and intermittent silk lines on the surface of the faucet. It can also create matte, mirror, three-dimensional, embossed, satin and other effects.
Brief Summary
Appropriate surface treatment can make the overall shape of the faucet rich and full. Choosing the right faucet can also become the finishing touch to the bathroom decoration. It is pleasing to the eye.
There are generally multiple layers of plating. There are also some cheap faucets that are only coated one layer. The coating is not as thick as possible, but just right. If the coating is too thin, it will not be able to prevent corrosion. If the coating is too thick, it is easy to peel off. Copper + nickel + chromium is best. Copper can provide excellent adhesion. Nickel makes the coating have excellent corrosion resistance. Chromium makes the surface bright and flawless, and it is hard and scratch-resistant. Further improving the corrosion resistance. In addition, the faucet that has passed the 48-hour professional salt spray test will be more guaranteed in terms of corrosion resistance. Aquacubic's products have passed these tests.
03 Cartridge
The cartridge is a part that realizes the basic functions of direction control, pressure control or flow control by means of the rotation of the valve stem. The water flow enters the main body of the faucet through the cartridge and finally leaves the water outlet. The faucet used at home is turned on and off countless times a day. It can be seen that the quality of the cartridge is also very important to the faucet.
Ceramic Cartridge
The ceramic cartridge has less water pollution, good wear resistance and good sealing performance. Many high-quality faucets use ceramic cartridges. The ceramic chip must have good airtightness, stable physical properties, wear resistance, and long service life.
Stainless Steel Cartridge
The biggest advantage of the stainless steel cartridge is that it has a larger adjustable angle of rotation and is not easily affected by water quality. It is more practical to choose this type in areas with poor water quality. However, stainless steel has worse wear resistance compared to ceramic. After it is used for a long time, water leakage is prone to occur.
Roller Cartridge
Roller cartridges are old-fashioned cartridges. No matter in terms of price, water pollution or life span, they are inferior to ceramics and have been phased out. There are very few roller cartridge faucets on the market.
Part 2: How to Buy ?
After understanding the most important parts of the faucet, let's take a look at the precautions when purchasing.
01 The Weight
Faucets made of brass are heavier. So you can make a preliminary judgment by weighing the faucet. However, many manufacturers can increase the weight of low-quality faucets through some methods. So here is a commonplace saying, for consumers who can't distinguish the material, it is better to choose the leading brands. This is the simplest selection method.
02 The Surface
In sufficient light, carefully observe the electroplated surface of the faucet. Good electroplating looks as bright as a mirror, without any oxidation spots and burn marks, no pores, no blistering, no plating leakage, no burrs to the touch. After pressing the faucet, the fingerprints will spread out quickly, and it is not easy to adhere to dirt.
Breathing out the surface of the faucet. For products with good electroplating quality, the water vapor will quickly and evenly fade away. If the quality is not good, the fading speed will be slower, or not fade. The faster and more even the water vapor fades, the better the quality.
03 After-sales Service
The after-sales service of the product is very important, and it is also the guarantee for you to have no worries. Be sure to buy products with good after-sales service. The general faucet is guaranteed for at least 5 years.
When choosing a faucet, the most important thing is to look at the material, plating and cartridge of the faucet. Because the material determines the safety of the water. The coating can increase the service life of the faucet, so that the faucet has scratch resistance, corrosion resistance, and the surface brightness will be better. The cartridge is the heart of the faucet. Generally high quality faucets use ceramic cartridges. It has the characteristics of strong wear resistance and good sealing performance.
When decorating kitchens and bathrooms, many people worry about whether to choose an above counter sink or an under counter sink. The above counter sink and the under counter sink have their own advantages and disadvantages. Which one to choose depends on your own preferences.
There is a difference between the definition of the above counter sink and the under counter sink in the kitchen and bathroom, we will analyze them separately.
Kitchen Sinks
Above Counter Sink:
Above counter sink installation is the most common and simplest. The opening size of the countertop is slightly smaller than the size of the sink, so that the sink can be placed on the countertop, and then a circle of glass glue can be applied around it.
Advantage
The above counter sink is easy to install, and there is no need to worry about deguming if the load is too heavy. It is also convenient to change the sink later, just scrape off the glass glue and replace the sink. The space left under the sink can be about 3 cm higher than the under counter sink.
Disadvantage
It is inconvenient to clean the countertop in future use. The sides of the sink and the countertop are sealed with glass glue. After a long time, the glass glue is easy to mold and turn black.
Under Counter Sink:
There are also two ways to install the under counter sink. One is to make a hole on the counter slightly smaller than the outer edge of the sink. The other is to cut a hole according to the inner edge of the sink.
Advantage
The under-counter sink is very easy to take care of, and the countertop is easy to clean. It is integrated with the countertop and more concise.
Disadvantage
Relatively speaking, the installation of the under-counter sink is more troublesome. The gap between the countertop and the sink is bonded with a strong adhesive. If you want to replace the sink, you may need to replace the countertop as well. In addition, no matter how strong the glue is, and the load-bearing capacity is uncertain, there is a risk of falling from the counter. General washing and load-bearing of pots and pans will not cause problems.
Bathroom Basins
Above Counter Basin
The basin above the countertop is called the above counter basin. The installation of the above counter basin is relatively simple, just cut a hole on the countertop according to the installation drawing. Then place the basin in the hole and fill the gap with glass glue.
Advantage
Above counter basins are more beautiful in shape and have a wide variety of types. You can choose according to your favorite style. Easy to install and remove. If you want to replace it with a new basin, you can directly remove it and install a new one.
Disadvantage
One is that it is troublesome to clean the countertop, and there is a hygienic corner between the basin and the wall. The second is that the glass glue is used to bond the basin and the countertop, and the glass glue is easy to turn black or mildew after a long time.
Under Counter Basin
Advantage
The biggest advantage is that it is easy to clean, and there will be no hygienic dead angle. The basin area is more clean and tidy.
Disadvantage
Similar to the kitchen sink, it is still a problem of installation and replacement. And the style of the under-counter basin is fixed, so it is impossible to make more choices in the shape.
In summary, the above counter basin and the under counter basin have their own advantages and disadvantages. Simply put, people who want to clean more easily can choose under counter basins in both the kitchen and the bathroom. For the convenience of installation and replacement, or for those who have styling requirements for the bathroom, an above counter basin can be selected.
Although the bathroom is small, it is a very important part of the decoration and is closely related to our lives. Everyday life starts here and ends here; if the decoration is not good, it can drive you crazy every day. The toilet is broken, the shower is blocked, and so on.
In the process of using the bathroom, some problems are always prone to occur. Therefore, when decorating the bathroom, it is necessary to control all aspects of the details in order to avoid the impact of daily life as much as possible.
Four Matters Needing Attention in Bathroom Decoration
1. Spare more power sockets and water outlets
Many people often forget to spare more power sockets and waterways during bathroom decoration. Changing smart toilets and heated towel rails in the later period will easily cause inconvenience.
2. The problem of wall and floor tiles
Before laying the floor tiles, do a water leakage experiment for at least 24 hours. Go downstairs to see if there are any signs of water leakage. The floor tiles are aligned with the wall tiles. When laying the floor tiles, ensure that the brick surface has a slope of about 1°towards the floor drain.
3. Separate dry and wet spaces
If the bathroom does not separate from wet and dry, it is easy to cause the water in the shower to splash everywhere. Easy to slip and fall. It is not conducive to cleaning and can not keep the bathroom dry.
4. The problem of replacing ordinary toilets with smart toilets.
When installing an ordinary toilet, users generally did not consider the subsequent transformation of the water circuit, and did not spare a strong electric power supply, socket and water circuit in the toilet position. It will be more difficult to use a smart toilet in the future. The pit distance should also be considered when installing the toilet.
Six FAQ about Bathroom Decoration
1. Which is more practical, shower room or bathtub?
In general, the shower room should be more practical than the bathtub. The shower is timely, convenient and practical, and relatively hygienic. For ordinary families, many people use it only once a year after the bathtub is installed. Most of them are used to soak clothes and curtains.
2. Is the shower curtain easy to use?
For small apartments, the area of the bathroom is relatively small. Glass partitions can make the already small bathroom appear more crowded. If the shower curtain is used as a partition, the entire space becomes much more spacious after unfolding. The shower curtain can also realize the function of separating dry and wet, preventing water from splashing out of the shower.
3. Choose mosaic for bathroom decoration, or is pure black and white more practical?
Mosaic decoration effect is good, but the material price and labor cost are more expensive. If you want to install a towel bar or shelf where the mosaic is used, you can only choose to use the expansion screw method, and it is more difficult to use the suction cup type. Mosaic is not easy to take care of, and it is easy to hide dirt. So try to use it in dry areas.
4. How to choose above counter basin and under counter basin?
The above counter basins have many shapes, large choices and ideal decoration effects. The installation is simple and convenient, and the maintenance is convenient in the future. If it breaks, remove the glue and pick it up directly from the countertop to repair it. However, when using the above counter basin, the water is easy to splash outside. You have to wipe the countertop after washing your face. The key is that there are dead spots that are difficult to wipe. For people who do not have a laundry balcony and like to wash their clothes by hand, it is recommended to choose a larger and deeper basin. Washing your face is the next thing, and you have to have a place to wash your clothes.
The under-counter basin is embedded in the middle of the countertop, which is more beautiful than the above-counter basin, and the basin surface is lower than the countertop. Water on the countertop can be easily poured or wiped into the basin, which makes it more hygienic.
5. How to install floor drain and socket ?
The location of the floor drain needs to be carefully considered, preferably on one side of the floor. If it is in the middle of the bathroom, the floor drain will not be the lowest point no matter how the tiles are inclined. Setting up well the location of the floor drain can avoid the problem of water accumulation.
The socket should be designed with a switch, especially the socket of the electric water heater should be equipped with a switch. You also need to spare a few more next to the sink to charge the common appliances such as hair dryers, razors, and electric toothbrushes. Electricity safety has never been a small issue, so special attention must be paid!
6. Why install the bathroom exhaust fan ?
The bathroom at home is relatively humid, which can easily breed bacteria, which affects our health. So everyone will install an exhaust fan in the bathroom, which solves the problem of damp space and keeps the bathroom fresh air at the same time.
Pull as you like. Return accurately.
When renovating the bathroom, the height of the faucet is a headache: if you buy a low one, you have to bend over when washing your hair or face; if you buy a high one, It's not convenient for the opening and closing of the mirror cabinet. On the other hand, it will cause water splashing due to the large drop...It is not a problem with the Aquacubic faucet!
Aquacubic faucet adopts pull-out design. With 360 degree sprayer head to realize free rotation and pull freely, the water can reach any place where the user needs it, and meet all the needs in the bathroom water process. After use, just let go. The built-in gravity hammer can help the faucet retract easily and quickly. Users can experience the pleasure of face cleaning and hair washing in a new way.
Long lasting new. Easy to clean.
The bathroom is full of moisture. In such an environment, water stains or fingerprints are easily left on the surface of the bathroom faucet. Scales will accumulate on the faucet after drying. They are difficult to clean and even gradually corrode the coating and form rust spots on the surface. To make the bathroom faucet last longer, you need surface treatment technology with easy-to-clean coating.
Aquacubic faucet adopts precision electroplating layer and SRS surface treatment technology, and passes 24 hours acid salt spray test. The surface has an elegant metallic luster. They are wear-resistant and corrosion-resistant. Faucet will be bright as new with a light wipe. You don’t have to worry about leaving fingerprints and watermarks when you touch it with wet hands. This reduces cleaning time.
The bathroom carries most of the cleaning work of a family. In turn it affects the living experience and life quality of the whole family. If you want to enjoy the exquisite life, you need the Aquacubic faucet that can be pulled freely to bring a fashionable bathroom to you!
Whether the owner of a house is willing to clean the room, the point is not how nice the living room is, but how clean the bathroom is. So what should a good-looking bathroom need to be? Let's take a look. The sink over vanity is the most important part of the bathroom. Therefore, a nice sink can add a lot to the beauty of the bathroom.
Water Drainage
There are two types of drainage.
Drainage in Wall: no exposed pipes can be seen, more beautiful.
Drainage in Floor: It can be seen that the pipe is directly connected to the countertop from the floor. There will be more cleaning work.
The advantage of the in-wall drainage is that if there is a leak in the drainage pipe upstairs, the neighbors downstairs will not be flooded.
The disadvantage is that once the drainage pipe buried in the wall is blocked, the wall needs to be destroyed, and the pipe may be dredged. But redoing the wall decoration is a new problem.
So you must use good materials when burying it, or you will be tossing yourself. Chinese families basically use the in-floor drainage, so they all need to customize the bulky cabinet to cover it.
Wall-mounted Cabinets
Compared with the traditional floor-mounted bathroom cabinets, the wall-mounted cabinets has a better appearance and lightness. Its bottom is suspended, which is very convenient to clean up. And without a hint of bulkiness, it looks very stylish and beautiful.
Wall-mounted wash basins generally choose in-wall drainage, and the drain pipe is perfectly hidden in the wall. So drain pipe can not be seen. It will improve overall aesthetics. Therefore, before installing the washbasin, drainage treatment must be done so that it will not cause too much trouble for later maintenance.
In addition, the bottom of the washbasin can be selected according to your own preferences, made into an open partition or a closed cabinet, or simply mixed and matched, which can meet the storage needs of towels and some toiletries.
Floor-standing Vanity
In modern bathroom design, floor-standing vanities are also welcomed by many young people today. However, its bottom is not completely close to the ground, and it does not look as solid and bulky as it used to be. It is basically designed with a bottom space, and it is supported by thin feet, which is also very convenient to install.
Of course, in addition to the pursuit of beauty, if you do not do a good job in the shower separation, it may cause water stains to penetrate or erode the cabinet legs, which will shorten the service life of the vanity over time.
There is no fixed choice for the drainage method of the floor-standing cabinet.
Even if you hide the sewer pipes in the cabinet in order to save effort, you can still ensure beautiful and practical effects. Make full use of the space. All objects will be placed neatly and uniformly.
Basin
I always thought that the washbasin is everything.
Later, after listening to the professional tasting, I realized how superficial such thoughts are. The washbasin is only a small part.
Above counter basin: high-end and high-grade.
Advantages: safe and convenient, many choices, the most important thing is easy disassembly.
Disadvantages: warping will appear at the connection with the countertop, especially the cheap water basin. And it is prone to leaking water to the sink cabinet. If the installation is not careful, there will be exposed glass glue, which will turn yellow and black after a long time.
Under-counter basin: low-key luxury.
Advantages: integrated with the countertop, beautiful and easy to clean.
Disadvantages: The countertop needs to be processed and installed in the workshop. The designer or installation worker who has insufficient experience will cause the water basin to deviate from the middle of the sink cabinet; it is necessary to choose a faucet with a suitable water outlet angle; it is inconvenient to disassemble.
Cabinet
By the form of installation, it can be divided into two types. One is a floor-standing and the other is a wall-mounted. Generally, floor-standing cabinets are used in bathrooms with separate shower rooms, and are more compatible with floor drainage. If your bathroom has a larger space, you can choose floor-standing wash cabinets.
Wall-mounted wash cabinets have become more popular in recent years. Its biggest advantage is that it is easy to take care of and save space.
In short, in this era of pursuing the supreme beauty, even the vanity has become more advanced unknowingly! If you don't want to make your vanity and bathroom sink look so mediocre, you might as well do some bold attempts and use the most popular design to improve the quality of life!
Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business.
We can provide total solution for projects. Look forward to cooperating with you.
In 2021 the U.S. kitchen and bathroom market is expected to reach $158.6 billion.
The United States is the world's largest importer of kitchen and bathroom products. For exporters of kitchen and bathroom products, the US market is very important. In January 2021, the National Kitchen and Bath Association (NKBA) released the "2021 Market Outlook Report". The report shows that the U.S. kitchen and bathroom industry will continue to grow, and the overall expenditure on kitchen and bathroom projects will increase in the coming year.
The industry predicts that after the overall decline of 5.9% in the U.S. kitchen and bathroom industry in 2020, it will reach 158.6 billion U.S. dollars in 2021, an increase of 16.6%, and an increase of 9% in 2018 and 1% in 2019. At the same time, it is expected that the growth of new houses will exceed 22%, while the renovation project will increase by 10%. High-end and mid-range projects are expected to lead, both of which are expected to increase by 20% than last year.
U. S. homeowners believe that the kitchen and bathroom area are twice as important as other spaces in the house. During the COVID-19 pandemic, the role of the kitchen is particularly prominent. 70% of homeowners believe that the kitchen is extremely important, compared to the previous proportion 64%.
With people's renewed attention to these family areas, the industry expects that large-scale interior renovation projects, including kitchen renovations, will usher in a new round of changes. This year may see a shift from the DIY in 2020 to the need for professional installers for kitchens and bathrooms. Many of these projects were delayed during the pandemic due to the risk of installation personnel carrying virus.
The report pointed out some motivations and inspirations to continue to promote the renovation project:
Although large-scale and more professional projects are planned to increase this year, saving money (attention 25%), project execution in leisure time (attention 23%), and health and safety issues (22%) are the main reasons for the increase in DIY.
Residents said that improving the aesthetics of the house was the main motivation for renovating the bathroom (16%) and kitchen (15%), followed by maximizing the quality and durability, and increasing the value of the house.
Houseowners pursuing cost-effectiveness and maximizing the use of existing budgets focus on renewing cabinets (52% of projects), plumbing (43% of projects), smart home products (57% of projects), and water purification systems (54% of projects) .
Family income and family member structure both affect the cost of kitchen renovation. "Mature families", that is, families with members over 45 years old and no children, have the highest percentage of upgrades to advanced functions in the kitchen.
Google search and social media are the main sources of inspiration for kitchen and bathroom renovations. Most owners stated that they rely on more than one source for inspiration. Young single homeowners or couples tend to rely more on Google and Instagram, while adults over 45 prefer to know what the other families did.
Economic factors that may affect renovation activities include:
1. A 10% increase in the operating rate of single-family housing in 2020 will drive a 17% increase in new residential building materials in 2021.
2. Of the total expenditure on residential kitchens and bathrooms, new houses accounted for 57%, reaching US$90 billion; residential renovations accounted for 43%, reaching US$68.6 billion.
3. Mortgage interest rates, which are about 1% lower than 2020, will continue to drive the home buying boom.
4. As the US houses for sale hit a record low, the price of stock houses will usher in price increase, which will indirectly promote house renovation rather than purchase of new houses.
5. The research report predicts that, driven by supply shortage and potential demand, total house prices will appreciate by about 31% between 2020 and 2023.