











In China some people say that the struggle in the big city is so hard. Why not go to work in a small town? Is it worth struggling to afford a small apartment for a lifetime? I believe many people will find it worthwhile, because in big cities there are opportunities that cannot be found in small towns. The small apartment is not terrible. We can remodel it. As long as we have a dream, everything is possible. The owner Mr. Zhang who lives in Shanghai, like most ordinary citizens, worked hard all the way from the small hometown and finally settled in Shanghai and bought an apartment of 70 square meters. After having a child, Mr. Zhang took his parents from his hometown. A family of 5 squeezed into a small apartment. There was only one bathroom. Every morning and every evening, they were faced with taking turns to line up to take a bath and wash. They had no patience after some time. So he thought about making another shower room, and he can make the most of the balcony. Looking at the balcony that costs him a lot, only used to pile debris and dry clothes, Mr. Zhang felt it was a pity. He had heard of a case of transforming a balcony into a shower room before, so he wondered why not give it a try. If it fails, it will be dismantled after all. After talking to his wife, Mr. Zhang started serious research. After careful study, he summarized the following points to note:
First of all, it must be waterproof. Due to the special location of the balcony, the back may be the living room or bedroom. Considering that moisture may cause mold and peeling on the back wall, it is recommended that the waterproof layer of the wall where the shower is installed is painted as high as possible. The waterproof coating is generally brushed 2~3 times.
Second, make sure that the ground has a slope. The ground also needs to be waterproofed, and it is also necessary to ensure that the ground has a certain slope so that the sewage from the bath is discharged to the drain and will not flow back to the living room or other places.
Third, strengthen heat preservation. There is a big difference between the balcony shower room and the indoor shower room. Generally, the indoor shower room has only one wall with windows, and it can be kept warm by installing a heating system.
Finally, pay attention to the issue of privacy.
After studying how to install it, the next step is to choose a good shower room. Which products can meet this special demand? Because the balcony shower room is unavoidable from the wind and sun, we must pay attention to its material and anti-rust, anti-corrosion, and anti-fading ability. At the same time, pay attention to whether the frame is strong and stable, and the wall of the shower room must be strong.
After comparison, Mr. Zhang finally chose this shower room. This shower room is based on apartment space. The large apartment frame glass curtain wall, angular and cylindrical surfaces make the entire bathroom space richer.
At the same time, automotive-grade toughened glass has a thickness of 10MM, can withstand 700° high temperature, and has a high strength about 5 times that of ordinary glass, with outstanding impact resistance and thermal stability. In addition, EPM steel mold protection is added, so you don't have to worry about the risk of glass bursting. Even if it breaks, it will still stick to the debris to prevent the glass from splashing and hurting people. You can take a shower without restraint.
The door frame, handle and hinge outside the main body of the shower room are all made of high-quality aluminum alloy, and the surface should also be treated with anti-corrosion, anti-rust and anti-oxidation. In this way, there will be no signs of paint falling off after being exposed to the wind and sun on the balcony, and the structure is relatively strong and not prone to deformation.
In addition, the shower room is installed on the balcony. We will most worry about water will flow everywhere. This shower room has a overflow channel and magnetic tape, which can lock the water in all directions. Don't need to worry about getting the living room wet.
For decoration, it is not easy to choose a suitable washroom basin. There are a lot of basins that are just plain useless.
Should we choose an over-counter, under-counter, integrated or pedestal basin ?
Let's take a look at the advantages and disadvantages of these basins and see which features are what we want most.
The bathroom is sometimes a dirty space, which is not easy to clean and take care of. The dampness, dirt, and bacteria can easily breed. Well, there may be cockroaches and spiders...
To keep the bathroom clean and tidy, the two most important points are: easy to tidy up and keep it dry.
If you choose basins based on these two points, let's analyze them one by one.
Basin Style
Above Counter Basin (Always Beautiful)
I stayed in a hotel once. The bathroom design was very creative. There are two wash basins. One is a normal under-counter basin, and the other is an above-counter basin with excellent artistic sense.
I use the under-counter basin for washing, but I always glance at the above-counter basin like a work of art.
Almost all such beautiful above counter basins can become an installation art in the home. For those who are pursuing art decoration, you can consider buying an above counter basin.
Under Counter Basin (Practical)
The embedded under counter basin and the "invisible" shape make the wash area look more refined and simple. This is probably a basin that many families use more often.
The basin connected with the countertop (Easy to Install)
The countertop and the basin are integrally formed, which saves a lot of trouble for cleaning. Because it is a modular grouping mode, the installation has zero pressure.
Semi-hanging Basin (Saving Space)
A semi-hanging basin is suitable for some customers, if we want to leave a little more space.
Pedestal Basin (Long Legs)
Especially suitable for use in small spaces.
Cylindrical Basin (Artistic Sense)
The cylindrical basin can be disassembled. Because it is straight-through, it is not easy to block. The disadvantage is that there is no countertop for placing bathroom accessories.
The selection of the basin also needs to be decided according to the specific design plan, such as shape, color matching, size and so on.
Finally, in order to keep this space dry and clean, we need to use a dry towel to wipe off the water in time, ventilate as much time as possible every day, and so on. Although it may seem troublesome, once you develop a habit, it will naturally be a lot easier .
Buying a new bathroom sink faucet can be a challenging task. You have to consider many factors, such as installation, types, and finishes.
Also, a wide variety of brands and faucets are available. The bathroom sink is a vital fixture, so selecting the correct faucet is essential.
Here are the steps for how to choose a faucet for your bathroom sink.
3 Tips on Choosing a Faucet
1. Installation
If you want to switch from two handles to one, you have to think about the number of holes in the sink.
Most sinks have three holes: one for the hot handle, one for the cold and one under the spout.
Some single-handle faucets include a cover plate to hide the extra holes. But some don't, so check the label.
If you currently have a “wide spread” bathroom faucet with two handles far from the spout,
you can’t switch to a single-handle model.
2. Faucet Types
Ⅰ. Single-hole faucets combine the spout and mixing handles—often a single lever—into one unit that requires only one drilled sink hole.
For retrofits, some models include a bottom plate that will cover existing three-hole openings. Single-hole faucets are ideal for smaller sinks,
such as powder room baths. Their simplicity reflects modern sensibilities.
Ⅱ. Center-set faucets fit standard three-hole sinks (with outer holes drilled 4 inches apart). They'll have either a single lever or
two handles mounted on a 6-inch plate. They're ideal for most bathroom sinks.
Ⅲ. Widespread mounts have three separate pieces: Two handles and the spout.
The standard distance between the handles is at least 8 inches, and the three pieces tend to be larger than other types of bath faucets.
Smaller versions, called minispreads, are designed for standard holes drilled 4 inches apart.
Ⅵ. Wall mount faucets have gained popularity along with freestanding or vessel-type sinks that require longer spouts
that extend well over the top of the bowl. Not every faucet fixture can be easily categorized. Kohler, for example,
makes a faucet that's integrated into a mirrored wall cabinet.
All you see is the tiny flow control lever peeking out from the bottom of your mirrored self.
3. Faucet Finishes
Choose a finish that matches nearby cabinet hardware, towel bars, etc. Mismatches look bad. If you plan to replace existing hardware,
your choice of faucet finishes is wide open. The vast majority of faucets have polished chrome, satin nickel or bronze finishes.
All of these finishes are durable and keep their good looks for years. But some are more durable than others.
Chrome is the most durable finish and the easiest to keep clean-that's why it's always been the favorite
for commercial kitchens and public bathrooms. If your faucet gets heavy use, it's your best bet for long-term toughness.
Nickel finishes are usually labeled “brushed,” “satin” or “stainless steel” and have a dull shine.
They're durable but prone to fingerprints and water spots, so they're harder to keep clean.
Some have a coating that reduces stains and smudges, but that coating isn't as durable as metal and may chip or wear.
Bronze faucets have a brownish tone and are often called “oiled” or “rubbed” bronze.
But the surface is a coating (such as epoxy) rather than metal.
This coating is tough stuff, but can be chipped or scratched more easily than metal.
Kitchen Design
When designing a functional kitchen, the rule of triangles should be kept in mind. That is, the sink, stove and refrigerator are arranged in a triangle. The L-shaped kitchen fits this triangle shape very well. The L-shaped layout is most suitable for small and medium-sized kitchens. The first-class kitchen is not only about the layout, but also about creating delicious food through the inspiration of the right layout.
1. The blank walls are decorated with a series of wall shelves and hanging rails for kitchen utensils.
2. This design allows flower pots to be stored in a space that is not large enough to accommodate a shelf.
3. This complete wooden kitchen extends its style beyond the corridor, to the adjacent wall and a room door.
4. The length of the double-window countertop looks magnificent, and the intricate patterns on the other wall balance the overall appearance.
5. Large potted plants form a natural separation between the kitchen and dining area.
6. Use inline mode to make full use of small space.
7. The combination of open shelves and multi-colored blocks is an interesting solution.
8. Minimalist kitchens can use handleless flat embedded-in-wall furniture.
9. Even the few special tiles can bring new colors to the pure white kitchen.
10. An open shelf occupies one wall, and a closed cabinet occupies another wall. Keep small spaces ventilated and open, instead of containing too many complex elements.
11. Floor tiles help make smaller spaces appear wider.
12. Horizontal stripes are another way to expand the space visually.
13. This extraordinary kitchen has a series of open and closed designs that can show and hide different appliances.
14. Two bar stools turn the end of a cabinet into a breakfast bar.
15. Wrap the work counter on the side of the end cabinet to get a stylish and luxurious appearance.
16. This L-shaped kitchen layout has corner windows and is dominated by pure yellow color blocks. It overlaps with half of the wall cabinet and finally passes through the window glass in the form of a colored film.
17. Add light wood tones and pleasant prints to the white kitchen to create a Scandinavian-style kitchen.
The bathroom is the wettest place in the house, and it is easy to breed bacteria if it is not properly cleaned. Next, learn these tips to make the bathroom as clean as new!
Clean the Faucet
Does the water stain on the faucet look dirty? Water stain can be removed with one trick! Mix the white vinegar and baking soda powder evenly, put the toilet paper in and soak it completely, then cover the faucet for 30 to 60 minutes, uncover it and rinse with water.
Cleaning the Shower Head
If the shower head is used for a long time, there will be a layer of scale on the surface, which looks dirty, and even more serious it will block the water outlet! You can take a plastic bag, pour white vinegar, wrap the shower head and fix it with a rubber band, soak it for 1 hour and then dry it with a dry towel. The shower head will be as clean as new. A clean shower head is much more comfortable to use!
Cleaning the Toilet
1. For yellow stains that are difficult to remove in the toilet, you can sprinkle with baking soda and soak in hot water for half an hour before washing. Remember to cover the water outlet on the inner edge of the toilet with toilet paper soaked in baking soda solution to achieve the purpose of soaking. The same goes for squatting toilets!
2. If conditions permit, you can remove the toilet lid and clean the gap.
3. Add some white vinegar to the water tank, which not only has the effect of disinfection and sterilization, but also removes the scale attached to the inner wall of the water tank.
Cleaning Bathroom Tiles
The joints of toilet tiles can easily turn yellow and black. Dip and use a toothbrush with washing powder, toothpaste or baking soda can effectively brush off stains. Remember to clean up water stains every time you use the bathroom!
Cleaning the Exhaust Fan
Exhaust fans can help keep the toilet dry, but because of the inconvenience of cleaning, it is often overlooked by us and becomes a place to hide dirt!
1. Remove the fan cover, soak it in soapy water and wash it, and then dry it.
2. Soak the rag in soapy water, wring it out, and carefully scrub the fan blades and vents. Finally wipe it with a dry towel.
3. Install the dried fan cover as it is.
Cleaning the Mirror
Bathroom mirrors are often stained with toothpaste, water stains and other things. At this time, you might as well use the leftover black tea bag to gently wipe the spots on the mirror, and then wipe it with a dry cloth to restore it to new.
Clean Rust Stains
The bathroom is damp. In case the metal utensils rust, you can cut the lemon in half, squeeze the lemon juice on the rust stains, soak for 10 minutes, brush off with a brush, and finally clean it with clean water.
There are many bottles and cans in the bathroom. You can apply a layer of nail polish on the bottom of the rust-prone material in advance to prevent rust.
How to define accessible luxury?
It is not only a design style,
It is a high-style life philosophy.
It is prosperous in a minimalist place,
Elegance is not complicated, simplicity is not simple.
Accessible luxury is not simple. It has a variety of manifestations.
Warm, light and luxurious, noble and comfortable
A touch of orange brightens the whole space,
Match with gray tile floor and brown wall,
It highlights the high style of the whole space.
Nordic luxury, elegant style.
The main color is gray.
Large light gray marble walls,
Decorate the whole space with a piece of green plants,
With light gray bathroom cabinet,
It's bright and comfortable.
Simple, light and luxurious, elegant and advanced
To simplify, black and white color covers the whole space.
Spacious wall space,
Complete set of black bathroom Shower Faucet,
Not only meet the requirements of storage, but also decorate the bathroom.
A variety of accessible luxury bathrooms,
With unique charm,
More possibilities for home,
Bring luxury and elegant life enjoyment to the customers.
1. Material:
The common faucet materials on the market today are: stainless steel, plastic, brass, zinc alloy faucet, etc.
Brass:
Brass is the most common material for faucet manufacturing. It is made of international standard H59/H62 copper. The casting adopts steel mold for gravity casting, and its wall thickness is uniform, generally 2.5-3.0 mm. The faucet made of brass is characterized by: no rust, durability, anti-oxidation, and sterilization effect on water.
Zinc Alloy:
The density of zinc alloy is lower than that of copper, and the handle is lighter. The surface of zinc alloy is easy to oxidize from the inner wall, and white oxide powder will appear on the surface. The strength is much worse than that of copper. The service life is not long, and the lead content is high. After one to two years, the faucet made of zinc alloy will oxidize and rot.
Plastics:
Plastic faucet has the characteristics of corrosion resistance, aging resistance, no rust, lead-free, non-toxic, odorless, high pressure resistance, light weight, easy construction, and low price. Plastic is not wear resistant.
Stainless Steel:
Now health and environmental protection has gradually become the new themes of modern life. Stainless steel is an internationally recognized healthy material that can be implanted into the human body. Therefore, kitchen and bathroom products with stainless steel as the main material have begun to become popular in European and American countries.
More than 90% of high-end faucets are made of brass. Brass is the most suitable faucet material and has antibacterial effect. Among them, H59 copper is most used. Its lead content is qualified. H62 copper’s lead content is less and more corrosion-resistant. Although stainless steel can be lead-free, but the quality is worse than copper due to the complex process and no antibacterial performance.
2. Faucet Manufacturing Process:
Most of the faucets on the market under $20 are made of sand mold casting, which is commonly referred to as "sand foundry". The internal structure of the valve body metal is loose, and it is easy to form interior defects such as stomata. It may not be found in appearance. However, after a period of use, defects such as water leakage, inadequate sealing and even more severe defects will occur. High-grade faucets usually adopt gravity casting, and the internal structure of the valve body metal is dense. For the same valve body, the weight of the products produced by the two processes is different, and the consumption of materials is also different. The weight difference between gravity casting valve body and sand casting valve body is about 1/4. Therefore, the same product has different prices.
3. Cartridge:
The faucet is turned on and off every day. The cartridge determines the service life of the faucet. At present, ceramic is the most suitable material for home use. The high-end faucet cartridge mostly uses ceramic, which is durable and can be opened and closed for 500000 times without leakage.
4. Water Hose:
The water inlet hose of the high-end faucet adopts pure 304 stainless steel. 304 stainless steel can bear high water pressure and ensure water purity.
5. Aerator:
The aerator of high-end faucet can give users a very comfortable bathing feel. The use of these accessories and materials can ensure the quality of the product. And whether or not to use the NEOPERL aerator is an important factor in judging the quality of the faucet.
6. Surface Technology:
The electroplated surface of high-priced faucets usually has a mirror-like feel. When you press it with your finger, the traces of hand prints will disappear immediately. Moreover, advanced environmental protection electroplating technology can prevent secondary pollution of products and ensure the purity of water.
7. Service Life:
The quality of high-end faucets is still good after 5 years of use, and meet all the national water-saving requirements. The durability, water-saving and environmental protection are its highlight value. Cheap faucets have a very short service life. After two or three months of use, quality issue may occur. And their safety is low.
8. After-sale Warranty:
High-end faucets are produced by professional manufacturers with a comprehensive after-sales service system. No matter the product has an accident or failure, the manufacturer or distributor will be responsible for solving it at any time. The manufacturers that provides higher price products are mostly more qualified, and they are very concerned about sales and reputation generated by each product.
All Aquacubic products that are finished in the production department have to pass their inspection first. There will also be the special inspection personnel to conduct an additional inspection to ensure that every product delivered to consumers is qualified.
The sink must be installed in the bathroom? Take a look at these locations that may be more suitable for sinks in your new home!
As a patient with lazy cancer, where to put the sink determines how many steps I have to take to wash my hands. Do I have to go to the bathroom after eating snacks and watching a drama at night, and getting up to wash my hands? Can't the sink be placed at the door? Put it under my nose? Or even in the balcony close to me? The answer is yes.
01. Where should the sink be moved out of the bathroom?
In order to make it easier for you to use, we will give you a few common places to put the sink. It can be installed in the hallway. There may be few people who think of this, but it is very common in Japan. As long as space permits, they will find a way to add a sink near the hallway so that they can wash their hands as soon as they enter the house. In addition, the sink can also be used as a partition of the entrance, so that even the entrance hall is made.
Put the sink on the aisle at the entrance of the bathroom. In this way, the dry and wet separations can be easily realized. Because the washbasin only occupies a small area, the total space will not become small.
If you are worried that the total appearance will be affected by putting it outside, and later storage can not be done well and it is messy, you can directly weaken it visually during the renovation by adding a wall to enclose it.
Wooden fences or glass can also be used as partitions, and cabinets can be used for storage on top.
The glass partition can prevent water from splashing everywhere when washing hands, and keep the space visually transparent.
If there is a gap between two rooms, you may consider putting the sink here. Such as between two bedrooms, between the kitchen and the bathroom, etc.
The advantage of this is that it can make full use of the space and avoid the waste of repeated settings. At the same time, it can also have the function of dividing space. It can also be installed on the balcony. Modern people spend most of their time in the living room. If you put the sink on the balcony closest to the living room, because there is plenty of light and the view is open, will you feel better when you wash your hands?
We can also put the washing machine next to it, throw the clothes in and wash them.
It is relatively rare to install on the dressing table. A dressing table can be placed in the bedroom to store all kinds of small things, and it can be combined with the sink. Sinks can be installed in the bathroom, outside the bathroom, or between the cloakroom and the bathroom.
According to our thoughts, these may seem strange, but starting from the owner’s living habits, it seems to be a reasonable design. Tip: The disadvantage of placing the sink outside the bathroom is the laying of water and sewage and waterproofing. Need to discuss with construction workers in advance and implement as required. Waterproofing should also be done well. It is recommended to follow the waterproof standard of the dry area of the bathroom, and apply waterproof paint at least 30cm high on the wall near the sink and on the floor. Secondly, there is no door to block the washbasin outside. If the storage is not done properly, the messy scene will be directly exposed. Therefore, the corresponding storage function must be done well, and the choice of towels even become stricter. Otherwise sit in the living room and see a messy washing area.
02. An easy-to-use sink can be like this.
In addition to moving the washbasin, its appearance and comfort should also keep up. You need to know the following knowledge. The style of the washbasin: Above counter basin and under counter basin. Above counter basin has a super good looking. In addition to square, round, oval, there may be other petal shapes to choose from. Generally they can be matched with high body faucets.
The under-counter basin is installed under the countertop and glued to the countertop from bottom to top. The advantage is that it is very convenient to clean the countertop. It is very common to have water on the countertop, you can easily wipe the water into the basin. It is more convenient to have a mirror cabinet, and the storage capacity can be improved a lot. Some mirror cabinets are fully enclosed, and some are partially open for storage. What kind of mirror cabinet to choose depends on your living habits.
Lighting Design.
Light is a top requirement for looking in a mirror. Most people may only install a mirror headlight above the mirror. In fact, the best way is to set up lights on the left and right sides of the mirror, which is about one person wide. Many professional dressing tables are set up in this way.
Double Basin Design
The double basin design can improve life efficiency. For example, a family of four has to go to school and work at the same time. And two people washing together is also very warm. Of course, double basins may only be suitable for large bathroom space.
Basin Style
It can be a basin or not. An artistic design. For example, in a retro-style home, try a bicycle wash basin.
There are also a few stacked stones. Is there a trace of natural "spring" style when the water runs out from the stone?
If you like minimalist style, consider this transparent glass wash basin.
If you want to realize the separation of dry and wet, but in the small area of the bathroom it cannot be realized, the above method can be considered. It is indeed completely reasonable and feasible to move the sink out.