Automatic Sensor Double Handle Pull Down Faucet- Suppliers Factory Manufacturers From China

As a manufacturer of sanitary products for more than 11 years, we have seen many customers whose bathrooms are really full of functions. Although it is small, the functions are still very diverse. Have to admire!

 

Modern decoration requires both practical functions and individual style, so the budget is often difficult to control. The bathroom space usage rate is high. If you can save it everywhere, rework and repair will occur, and the gains will outweigh the losses. At the same time, the cost of furniture and decoration can also be spent more or less. The following are some small details on the bathroom decoration, which can save costs time and time again!

 

1) Waterproofing is essential for walls. 

Waterproofing in the bathroom is very important, not only to choose high-quality materials, but also to ensure professional painting. The wall waterproof in the wet area should be at least 180cm above the ground and 50cm for other places. The ground waterproofing generally needs to be brushed twice and a 24-hour closed water test should be carried out. Wall corners, water pipes, etc. should also be carefully done.

 

Ceramic tiles are the highlight of bathroom decoration. And the wall area is large. You can choose relatively economical tiles to ensure the waterproof performance. You can also directly paint with waterproof paint where it is not in the shower area. It will reduce cost.

 

Mosaics with rich patterns can enhance the visual aesthetics of the space. And to reduce material costs and manual laying costs, mosaics can be laid only on key positions. Tiles, waist line and top line can be selected according to your own needs to control the cost of decoration.

The original light-body wall is removed and replaced with a transparent glass wall, which expands the visual area of the space and also saves costs.

 

Mosaic paving requires a high labor cost, so you can find a large mosaic-like wall tile to pave the wall, which can save a lot of money. Since there are fewer gaps between large-size mosaic tiles, the amount of caulking agent is correspondingly reduced, which is often used for reference and selection in home decoration.

 

2) The floor area should be beautiful and non-slip.

Safety should be placed in the most important position, and slip resistance should be considered in the selection of floor tiles. At the same time, the human body will directly touch the ground, so the quality of materials should be paid attention to. Bright floor tiles are relatively slippery, so use them as little as possible in the bathroom, and use matte floor tiles or tiles with good anti-slip properties.

 

When paving the floor tiles, the slope must be appropriate, and the floor drain must be the lowest point so that the water can flow smoothly. The floor tiles should be made of whole tiles as much as possible, and the gap between the tiles should be controlled at about 2mm.

 

The area of decorative tiles on the ground is smaller than that of the wall. The use of interval paving can save the budget, and only use the same pattern of tiles to be separated by more than one tile.

 

If you want to create a low-cost bathroom with a natural texture, you can use wood-grain tiles instead of waterproof solid wood, which also has the characteristics of natural patterns, elegant colors, and easier matching with other sanitary wares.

 

Paving decal tiles in the bathroom can improve the monotonous bathroom style. In the actual construction process, the cost of laying decal tiles is much cheaper than mosaic.

 

When special-shaped handmade tiles are laid on the ground, they should be from the inside out, the gap between the tiles should be controlled within 8mm, and the height of the caulking agent should be level with the tiles. The paving of this kind of tiles should be carried out in sequence according to the serial number on the back to avoid waste caused by rework.

 

3) Cleverly arrange the exposed and concealed sanitary ware. 

The bathroom is a place where multiple channels of water and electricity converge. In the early stage of renovation, it is necessary to choose quality water pipes, wires, etc. And the wiring must comply with the regulations to avoid water leakage due to design and material selection problems.

As the space expands and functions increase, there are more and more electrical appliances in the bathroom. If you want to install smart toilet lids, integral shower rooms, massage bathtubs, multi-functional bathroom cabinets, etc., you must first make the sockets during the decoration to avoid rewiring in the future and increase the trouble.

 

The plumbing renovation of the bathroom is most laborious. If you want to save this part of the cost, the pipeline must be open-lined, without slotting, and future maintenance can also save a lot of costs.

In addition, avoid excessive wiring when rebuilding waterways and circuits. Use multi-hole sockets as much as possible on the panel of the socket. Under the premise of the same number of wires, you can plug in more electrical appliances. The wiring of the space is reconstructed with open wires, and the wires are routed from the top. The outer wall of the pipe is painted with waterproof paint, which saves a lot of labor costs and is also convenient for maintenance.

 

The bathrooms are uniformly decorated in black and white tones, simple and generous. The upper and lower water pipes of the sanitary ware are made of metal material, which has a long service life and is not easy to be damaged.

 

The space matching has been cleverly designed. The cement wall is matched with solid wood floor tiles, which is elegant and warm, satisfying practical functions and beautiful.

 

4) Shower Area

The quality of the glass used in the shower room is closely related to the safety of the bathroom. Fine tempered glass is generally difficult to break, and it will not hurt people when broken. Therefore, when choosing, don't be greedy for temporary cheapness, and try to choose high-quality, well-reputed brands.

The frame of the shower room is usually made of aluminum alloy, and the surface is sprayed with plastic, so it is not corroded or rusty. The thickness of the main frame aluminum alloy is preferably 1.1mm or more, which is not easy to deform.

 

In addition to professional brand shower rooms, the shower area can also be separated from dry and wet areas with various partitions. Common glass partitions only need to be installed on one side when combined with the wall, which saves costs by using less materials.

At the same time, the installation of the shower room can be omitted. The base of the shower room mainly plays the role of heat preservation and drainage, and the material is mostly acrylic.

 

The shower area is separated by a glass wall, and the ground is transitioned by steps to create a semi-enclosed shower space. The glass partition is directly fixed with hardware without reaching the top, which gives the space better permeability.

 

A wall serves as a partition, separating the wash area from the shower area. The interior of the wash area is covered with ceramic tiles, the exterior is painted with waterproof paint, and the key parts are strengthened.

 

5) Wash Area 

The floor drain is most commonly used for sink, and the wall mount type can be used for more advanced spaces. It is best to have all S-bends to prevent upward odor. Basins are divided into above-counter basins, under-counter basins and wall-mounted basins. Above counter basins for households are more suitable and easy to install. The under counter basin is suitable for a large area bathroom, and the installation is relatively complicated.

 

Small-space or low-budget families can abandon the overall bathroom cabinet, and use a transparent iron frame to save space and leave more space for the legs. Mirror cabinets and recessed cabinets are more suitable for small spaces and complete the storage function of the bathroom. To reduce the cost of decoration, you can choose a single color and simple style in the decoration, and match it with retro copper-colored, metal-colored faucets or mirror lights to create highlights.

 

Build the washstand with cement, and place storage baskets underneath. The wall-mounted faucet is highly decorative, but the size must be measured accurately in advance, otherwise it cannot be installed, which will affect the use.

 

There is no special furniture under the basin; only metal racks are used to save costs and place toiletries.

 

Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We have rich experience and passion in bath and kitchen industry and appreciate your contacting and business. Look forward to cooperating with you. Thanks a lot!

This article introduces the three main components of the faucet. It will help you to understand the quality and material of faucets we use everyday. Uncover all the mysteries of the faucet.

 

Part 1: Composition

The three most basic components of a faucet: main body, plating and cartridge.

01 Main Body

The main body is the torso part of the faucet. The water flows in and out of the main body all the time. So the material is important. It determines the water quality.

 

Copper Alloy Faucet

Copper alloy is currently recognized as the most suitable main material for home use faucet, and the mainstream is brass. On the one hand, copper has good machinability, fluidity and formability. On the other hand, because copper ions have a bactericidal effect, they can kill super bacteria such as MRSA within 30 minutes and prevent the bacteria from producing antibodies. The inner wall of the copper faucet will not breed bacteria and become the most suitable carrier for "water".

 

According to different proportions of copper content in copper alloys, copper alloy materials can be divided into 52, 55, 59 and 62 copper. Among them, 59 copper is the best. The content of copper metal is 58%-60%, the content of lead metal is 0.08%-0.2%, and the content of other elements is about 2%. The remaining metal is basically zinc.

 

Because lead metal will precipitate when water enters the faucet, it will pollute the water. If the lead content is too high, it is harmful to the human body. Therefore, some brand faucets use low-lead copper, that is, the lead content is less than 0.1%. In view of the fact that it is difficult for general consumers to judge the lead content, it is recommended to choose a faucet with a clear mark that uses low-lead copper.

 

Zinc Alloy Faucet

Zinc alloy is an alloy based on zinc and added with other elements such as aluminum, copper, magnesium, cadmium, lead, and titanium. Zinc alloy is easily corroded in water. After being corroded, the metal will be mixed into the water and cause harm to the human body. The biggest advantage is probably the low price.

 

Stainless Steel Faucet

The main components of steel are iron and carbon. Ordinary carbon steel is easy to rust. Adding chromium, nickel and other metals to carbon steel can make the steel corrosion resistant. Therefore, the most important factor affecting the corrosion resistance of stainless steel is the content of chromium.

 

Stainless steel has the advantages of acid resistance, alkali resistance, corrosion resistance, and no release of harmful substances (lead). But compared with copper, it has one of the biggest drawbacks, that is, it does not have antibacterial function.

 

Brief Summary

If the budget is sufficient, choose low-lead copper faucets. If you can't identify whether it is low-lead copper, choose a product from a big brand.

If you have a small budget, you can choose stainless steel faucets. The price will be cheaper. However, relatively there will be some problems. In particular, we must choose products from high standard manufacturers. After all, it's about your own health, don't be greedy for cheap.

 

 

02 Plating

The faucet is used in a humid environment, and its surface requires a good finish. The common surface treatment method on the market is electroplating, mainly including chrome plating, nickel plating, titanium plating and so on. In addition, there are some rarer methods such as baking varnish, porcelain, and imitation gold electrophoretic paint.

 

Chrome

Chrome plating is the most common faucet plating. Chromium is a white metal with a bluish color, which has high hardness and wear resistance. Its hardness exceeds even the hardest quenched steel, second only to diamond.

Chromium is not easy to change in a humid environment and can maintain the surface gloss for a long time. With a silver appearance, chrome-plated faucets are more popular with consumers.

 

Nickel

Nickel can quickly form a very thin passivation film on the surface of the faucet. Can resist the corrosion of water vapor and certain acids. Has excellent corrosion resistance and stability. Can resist the corrosion of water vapor and certain acids. Therefore, the stability of the nickel layer in a humid environment is very high.

Titanium Alloy

Titanium alloys are made by adding aluminum and tin elements or aluminum and vanadium elements to titanium. Electroplated titanium gold has the advantages of high strength, low density, strong toughness and good corrosion resistance. The surface of the titanium-plated faucet is as smooth as a mirror. Its golden luster looks elegant and rich, and very decorative. However, the process of plating titanium gold is complicated. It is very easy to absorb impurities during thermal processing. Therefore, the yield is low. The cost is also higher.

 

Baking Varnish

Baking varnish is to put two layers of coating on the faucet. Each time the paint is applied, it is sent to a dust-free constant temperature baking paint room for electric heating or far-infrared high temperature baking.

The surface of the baking varnish faucet is smooth and shiny, which can present a visual texture similar to that of a piano, making the whole product look very high-grade. However, compared with other surface treatment methods, baking varnish faucets are more prone to surface peeling. The durability is not as good as the traditional chrome-plated faucet. This method is not widely used.

 

Brushed

This treatment will make the surface of the faucet visually rough. However, it is quite delicate to the touch, showing a restrained beauty. The brushed process mainly relies on mechanical friction to produce several common textures such as straight lines, chaotic lines, threads, corrugations, swirling lines and intermittent silk lines on the surface of the faucet. It can also create matte, mirror, three-dimensional, embossed, satin and other effects.

 

Brief Summary

Appropriate surface treatment can make the overall shape of the faucet rich and full. Choosing the right faucet can also become the finishing touch to the bathroom decoration. It is pleasing to the eye.

There are generally multiple layers of plating. There are also some cheap faucets that are only coated one layer. The coating is not as thick as possible, but just right. If the coating is too thin, it will not be able to prevent corrosion. If the coating is too thick, it is easy to peel off. Copper + nickel + chromium is best. Copper can provide excellent adhesion. Nickel makes the coating have excellent corrosion resistance. Chromium makes the surface bright and flawless, and it is hard and scratch-resistant. Further improving the corrosion resistance. In addition, the faucet that has passed the 48-hour professional salt spray test will be more guaranteed in terms of corrosion resistance. Aquacubic's products have passed these tests.

 

03 Cartridge

The cartridge is a part that realizes the basic functions of direction control, pressure control or flow control by means of the rotation of the valve stem. The water flow enters the main body of the faucet through the cartridge and finally leaves the water outlet. The faucet used at home is turned on and off countless times a day. It can be seen that the quality of the cartridge is also very important to the faucet.

Ceramic Cartridge

The ceramic cartridge has less water pollution, good wear resistance and good sealing performance. Many high-quality faucets use ceramic cartridges. The ceramic chip must have good airtightness, stable physical properties, wear resistance, and long service life.

 

Stainless Steel Cartridge

The biggest advantage of the stainless steel cartridge is that it has a larger adjustable angle of rotation and is not easily affected by water quality. It is more practical to choose this type in areas with poor water quality. However, stainless steel has worse wear resistance compared to ceramic. After it is used for a long time, water leakage is prone to occur.

 

Roller Cartridge

Roller cartridges are old-fashioned cartridges. No matter in terms of price, water pollution or life span, they are inferior to ceramics and have been phased out. There are very few roller cartridge faucets on the market.

 

Part 2: How to Buy ?

After understanding the most important parts of the faucet, let's take a look at the precautions when purchasing.

 

01 The Weight

Faucets made of brass are heavier. So you can make a preliminary judgment by weighing the faucet. However, many manufacturers can increase the weight of low-quality faucets through some methods. So here is a commonplace saying, for consumers who can't distinguish the material, it is better to choose the leading brands. This is the simplest selection method.

02 The Surface

In sufficient light, carefully observe the electroplated surface of the faucet. Good electroplating looks as bright as a mirror, without any oxidation spots and burn marks, no pores, no blistering, no plating leakage, no burrs to the touch. After pressing the faucet, the fingerprints will spread out quickly, and it is not easy to adhere to dirt.

 

Breathing out the surface of the faucet. For products with good electroplating quality, the water vapor will quickly and evenly fade away. If the quality is not good, the fading speed will be slower, or not fade. The faster and more even the water vapor fades, the better the quality.

03 After-sales Service

The after-sales service of the product is very important, and it is also the guarantee for you to have no worries. Be sure to buy products with good after-sales service. The general faucet is guaranteed for at least 5 years.

 

When choosing a faucet, the most important thing is to look at the material, plating and cartridge of the faucet. Because the material determines the safety of the water. The coating can increase the service life of the faucet, so that the faucet has scratch resistance, corrosion resistance, and the surface brightness will be better. The cartridge is the heart of the faucet. Generally high quality faucets use ceramic cartridges. It has the characteristics of strong wear resistance and good sealing performance.

We all dream of having a spacious bathroom, preferably a separate bathtub and shower, two sinks, and even a comfortable lounge chair to rest after bathing.

So, today we share with you 10 bathroom design principles. You can use some or all of these techniques to double your bathroom space.

01. Use White Color

One of the easiest ways to make a space look spacious is to use a lot of white: white tiles, white wall paint, white accessories, etc. White allows other colors to recede naturally, making the space look bigger. It can reflect any light instead of absorbing it.

The use of white is particularly effective in the bathroom. Since the bathtub, toilet and sink in the bathroom are basically white, the use of other white can make the space seamlessly connected, making the space transparent and creating a sense of expansion.

 

Using a lot of white does not mean pale and empty, lack of personality. Using different structural elements, such as light-colored stones or tiles with different textures, and a small amount of metal or wood intervention, can maintain a seamless appearance while also presenting the richness of the space.

 

02. Use Same Style Color

If you are not a fan of white, you can use warm beige, soft gray or even pink (pink blue, pink, etc.) to create a sense of spaciousness. Choose an elegant ceramic tile, and choose the matching color system for the rest of the wall. The overall effect is quiet and warm, and will not cause visual breaks and reduce your sense of space.

 

03. Use Floating Design

In a compact bathroom, balancing storage needs and a sense of spaciousness and freedom is a tricky issue. The suspended wash basin design is a good solution. It gives you a lot of space to store essentials. The empty space at the bottom is like an entrance and exit for air flow, which does not make people feel oppressed and tense.

 

04. Less is More

Less is more. If it is not necessary to have a large storage area, use small-sized wash basins to leave more open areas to make the space look bigger. If there is a bathtub next to the toilet, you need to leave enough space.

 

05. Use a mirror to enlarge the space.

A large enough mirror can double your space, especially in the bathroom. However, this kind of large mirror must be of good quality, and the size and thickness must be accurate, otherwise it will seriously affect the overall layout. A good mirror will have a very powerful effect, and you can make the room look perfect in just a few minutes.

 

06. Use Glass Doors

Another good way to expand the space is to use glass as a partition for the door or shower room. The visual extension makes the space look bigger. Especially in the shower.

 

If you are worried about privacy, you can use frosted or tinted glass, which can still achieve the effect of light transmission and will not make you feel cramped and depressed in the shower. If there is no special need, it is recommended to abandon the bathtub and install a shower room. The bathtub consumes a lot of valuable space, and the usage rate is extremely low.

 

07. Design a Suitable Alcove 

Designing an open alcove in a suitable location can not only increase the storage space, but also increase the visual depth, making the wall look far beyond the real distance.

 

When designing alcove, you must communicate with professionals, because there will be many wires, pipelines, etc. in the wall of the bathroom.

 

08. Good Lighting

Good lighting is essential to make any space look bigger and more open, especially in bathrooms that don’t usually have much natural light. In addition, you also need good lighting in the bathroom to effectively perform shaving or makeup, so its importance does not need to be emphasized.

 

The key is to have a rich lighting scheme in the bathroom, and it is best to use multiple light sources in different locations. Ceiling lights (multiple bulbs can be used), or modern edge-lit mirrors will help you avoid shadows and make the space feel bright and open.

 

09. Create Long Lines

Whether your bathroom is typically rectangular or oddly shaped, you can always find a wall or area that is slightly longer than other places. Adding a shelf, a tile strip, or even a simple striped wall paint to these areas can help you lengthen the longest line in the room and draw the sight to the farthest position, giving the space a sense of extension.

 

10. Balance the Horizontal and Vertical Ratio

If your bathroom is already very long, narrow and tunnel-shaped, don't emphasize the length anymore, you must think more about stretching the width visually.

For example, in this long and narrow bathroom below, the tiles on the wall and the floor are laid in a horizontal splicing way, which invisibly increases the visual width, and the spatial balance becomes more harmonious.

After the shower is turned off, the water still runs. Is it a quality problem?

Have you encountered a problem like this? After the shower was turned off, the water still ticked out. Sometimes after turning off for a long time, the water still flows out suddenly, and it flows fast. This is how it happened. Today, let's take a look at "The sudden water flow problem after the shower is turned off".

 

Regarding this problem, at first it was suspected that it was a shower quality problem. In order to clarify it, we also specially checked our showers, but this kind of situation still occurs. Later, we asked a professional to figure out that the water running after the shower was turned off was because of the water stored in the top spray and the shower pipe.

 

Professional explanation: In order to pursue the comfort of showering, the current shower head sprays are very large. The bigger it is, the more water there is after turning off the faucet. After use, the air pressure inside the shower is in equilibrium with the atmospheric pressure, so the water inside will not flow out temporarily. After some time, the water will flow out when the balance is lost. This is a problem with large-top showers. It is not that the shower is leaking or broken, so you can rest assured if you encounter this problem. If it is a constant dripping and leaking, then it is a quality problem.

 

So what should I do if the shower really leaks?

Analyze the factors of the shower leakage first. The main points are as follows:

 

1. The shower nozzle is blocked. If it is used for a long time, the water output will become smaller. If the water quality is not good, the water contains a lot of alkali, and scale deposits on the water outlet cause the shower to be blocked. At this time, it has to be resolved by the seller of the shower. Therefore, it is very important to choose a reliable seller.

 

2. Shower plating. Many people have found that the surface paint on the shower can peel off. It will be ugly after the paint is peeled off. If you have just bought a shower that has this problem, it will affect the appearance. In addition, some poor-quality showers will block because of paint falling off. So we have to take a closer look at the surface of the purchased shower for these problems.

 

When purchasing a shower, you must carefully observe whether the surface of the shower is smooth or not. If it is rough to the touch, it may be processed twice.

 

3. The material of the shower. Some showers are made of plastic or cast iron. The plastic shower head may contain a lot of waste material, and the service life will not be long. Of course, some hand showers that use plexiglass, ABS and other materials are still very good. However, it is not recommended that you choose the shower head made of cast iron, which is easy to rust. Many people who chose this shower are very regretful, because it didn't take long for it to rust. It's ugly, and it also blocked the water outlet and broke the entire shower. At present, the better material is copper. 

 

After knowing the reason, we can come to a solution. There are mainly the following solutions for leakage in the shower:

1. Leakage at the steering ball of the shower head. First unscrew the shower head from the steering ball ring, find the O-ring or similar seal inside and replace it, and then turn the shower head back. Just go to the original position.

 

2. Leakage occurs at the joint of the handheld shower. Select the right size shower hose and shower head according to the specifications, replace its rubber ring, and reinstall it.

 

3. Water leakage caused by gravel or sediment. Unscrew the shower head for cleaning. If necessary, soak the parts with vinegar and scrub the parts. Take care to avoid scratching it. If the shower head is an adjustable spray type, carefully check all movable parts for signs of excessive wear. If the rotating handle cannot move smoothly, the internal cam may be broken, and the entire shower head needs to be replaced.

 

4. The spray mode from the shower head becomes a mixture of spray and rain mode. If the shower is used for a long time, the water output will decrease. It may be because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet cause the shower to be blocked. It is also very simple to solve. For the shower head designed with silica gel particles, just gently knead it. If the scale is serious, you can put white vinegar in a plastic bag, wrap the shower and soak for some time, then rinse with water.

Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers. 

The products include faucets, sinks, basins, bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.

Look forward to cooperating with you.

Thanks a lot!

Whether the owner of a house is willing to clean the room, the point is not how nice the living room is, but how clean the bathroom is. So what should a good-looking bathroom need to be? Let's take a look. The sink over vanity is the most important part of the bathroom. Therefore, a nice sink can add a lot to the beauty of the bathroom.

Water Drainage

There are two types of drainage.

 

Drainage in Wall: no exposed pipes can be seen, more beautiful. 

Drainage in Floor: It can be seen that the pipe is directly connected to the countertop from the floor. There will be more cleaning work.

 

The advantage of the in-wall drainage is that if there is a leak in the drainage pipe upstairs, the neighbors downstairs will not be flooded.

The disadvantage is that once the drainage pipe buried in the wall is blocked, the wall needs to be destroyed, and the pipe may be dredged. But redoing the wall decoration is a new problem.

So you must use good materials when burying it, or you will be tossing yourself. Chinese families basically use the in-floor drainage, so they all need to customize the bulky cabinet to cover it.

 

Wall-mounted Cabinets

Compared with the traditional floor-mounted bathroom cabinets, the wall-mounted cabinets has a better appearance and lightness. Its bottom is suspended, which is very convenient to clean up. And without a hint of bulkiness, it looks very stylish and beautiful.

 

Wall-mounted wash basins generally choose in-wall drainage, and the drain pipe is perfectly hidden in the wall. So drain pipe can not be seen. It will improve overall aesthetics. Therefore, before installing the washbasin, drainage treatment must be done so that it will not cause too much trouble for later maintenance.

 

In addition, the bottom of the washbasin can be selected according to your own preferences, made into an open partition or a closed cabinet, or simply mixed and matched, which can meet the storage needs of towels and some toiletries.

 

Floor-standing Vanity

In modern bathroom design, floor-standing vanities are also welcomed by many young people today. However, its bottom is not completely close to the ground, and it does not look as solid and bulky as it used to be. It is basically designed with a bottom space, and it is supported by thin feet, which is also very convenient to install.

Of course, in addition to the pursuit of beauty, if you do not do a good job in the shower separation, it may cause water stains to penetrate or erode the cabinet legs, which will shorten the service life of the vanity over time.

There is no fixed choice for the drainage method of the floor-standing cabinet.

Even if you hide the sewer pipes in the cabinet in order to save effort, you can still ensure beautiful and practical effects. Make full use of the space. All objects will be placed neatly and uniformly.

 

Basin

I always thought that the washbasin is everything. 

Later, after listening to the professional tasting, I realized how superficial such thoughts are. The washbasin is only a small part.

 

Above counter basin: high-end and high-grade. 

Advantages: safe and convenient, many choices, the most important thing is easy disassembly.

Disadvantages: warping will appear at the connection with the countertop, especially the cheap water basin. And it is prone to leaking water to the sink cabinet. If the installation is not careful, there will be exposed glass glue, which will turn yellow and black after a long time.

 

Under-counter basin: low-key luxury.

Advantages: integrated with the countertop, beautiful and easy to clean.

Disadvantages: The countertop needs to be processed and installed in the workshop. The designer or installation worker who has insufficient experience will cause the water basin to deviate from the middle of the sink cabinet; it is necessary to choose a faucet with a suitable water outlet angle; it is inconvenient to disassemble.

 

Cabinet

By the form of installation, it can be divided into two types. One is a floor-standing and the other is a wall-mounted. Generally, floor-standing cabinets are used in bathrooms with separate shower rooms, and are more compatible with floor drainage. If your bathroom has a larger space, you can choose floor-standing wash cabinets.

 

Wall-mounted wash cabinets have become more popular in recent years. Its biggest advantage is that it is easy to take care of and save space.

 

In short, in this era of pursuing the supreme beauty, even the vanity has become more advanced unknowingly! If you don't want to make your vanity and bathroom sink look so mediocre, you might as well do some bold attempts and use the most popular design to improve the quality of life!

Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business.

We can provide total solution for projects. Look forward to cooperating with you. 

ALWEN Dual handle bathroom faucet, a luxury modern contemporary three hole bathroom vanity sink lavatory faucet. Brushed nickel/Chrome finish. UPC, cUPC, NSF certified, lead free bathroom faucet.

Description

This bathroom faucet comes in a beautiful polished chrome finish and is practical and stylish. Its center set design with handles will keep your bathroom simple, modern, and keeping space tight and easy to clean.

Features:

Solid Brass construction to resist rust, corrosion, and tarnish

Swiss NEOPERL Aerator ensures perfect water flow and environment friendly. 

High Arc faucet spout ensures enough space for washing hands and clean.

Aquacubic provides "Quality Bath & Kitchen Solution" to our customers.
Quality is always the first priority of Aquacubic. We understand the importance of quality to our clients, and quality is the foundation for long -term cooperation. To deliver high quality products, we established the whole quality system from raw materials checking to mass production audit and final products inspection. Most of our products are CE and CUPC certified.

Cooperating with Aquacubic is cost saving. Aquacubic make great investment in machines to increase production efficiency. Thanks to long existence in the industry and good relationship with material suppliers, Aquacubic has good cost control system and bargain power, to ensure competitive pricing for our customers. Once you contact with Aquacubic, you will find yourself are in service of a hardworking, reliable, sincere team with good communication skills. Our associates also provide value-added service for design, test report, shipment arranging, freight cost control and so on.

Aquacubic has rich experience and passion in bath and kitchen industry and appreciate for your contacting and business.

The home is inseparable from the support of basic hardware. Don't underestimate the basic hardware. Their technological content and technical barriers are higher than you can imagine.

Of course, the difference in quality and price is even more surprising.

Basic hardware generally includes: hinges, damper, sliding rails, etc. Put it simple, all the hardware components that enable the cabinet and the pull basket to achieve the functions of opening, sliding, and staying.

Hinges

The most used is the hinge. It not only needs to connect the cabinet body and the door panel accurately, but also bear the weight of the door panel alone. And all doors must be kept neatly arranged. Otherwise, it may loosen and fall after a period of time.

 

Sliding Rails

In the design of the entire drawer, the most important accessory is the sliding rail. Due to the special environment of the kitchen, even if the low-quality sliding rail feels good in the short term, it will be difficult to push and pull after a longer time.

 

Damper

The damper is matched with the sliding rail and the hinge. The damper has two most important functions. One is to improve the precision of the hardware, and the other is shock absorption.

Flip up Door Support: First of all, it is sturdy and has no shaking, the surface is smooth and the workmanship is fine. And it is smooth and quiet in use.

In addition, damper and rebound depend on whether the force is uniform, and if there is no load, test whether it can be smooth and quiet under load, and whether there is obvious friction and jamming.

Considering the frequency of use, be sure to choose a big brand. The good ones can last for decades, and the poor ones will have quality problems in three to five years.

Now we will introduce the international brands of kitchen hardware products and their characteristics.

 

GRASS of Austria is one of the largest hardware vendors in the world, focusing on the development of furniture hardware, just like their slogan: Let the opening and closing of furniture become the most comfortable experience.

Their products are mainly comfortable to use. The best product is the sliding rail system. Others include hinges and upturn supports.

 

Salice of Italy is a veritable king of hinges, and the world's first modern furniture hinge was made by them.

In the European high-end furniture market, it is in a "monopoly" position. The top cabinets in Germany and Italy almost all use Salice's hinges.

 

Expensive and good.

No need OEM service from other factories. 100% of the spare parts are all from Europe. Surface treatment and rich colors are also a major feature.

 

Hettich in Germany is like a furniture hardware store, with a multi-faceted product line, which is still a little different from the two above.

Many people think of them as expensive, solid materials and excellent performance.

 

Then there is Blum in Austria, which is more like a cabinet hardware store. The main product is hinges, which is still far from Salice. Most professional cabinet brands use Blum's hinges. Blum is the most well-known hinge company in China.

 

Finally, let us talk about the German KESSEBOHMER, which is smaller than the above ones. It focuses on the cabinet hardware. The design and craftsmanship are excellent. The selection of materials is strict and the workmanship is fine.

 

And there also is Hafele. Hafele is almost like an international distribution center for hardware accessories. The product line is rich, covering construction, furniture, cabinets and other fields. Most products are from global procurement and OEM factory. Hafele can be called Carrefour in the hardware industry.

The ranking of domestic hardware brands has changed considerably. The more famous ones are DTC and HIGOLD.

DTC mainly has a large output. The domestic output in China is the first. It is also among the best in the world. The main products are connectors, hinges and slide rails.

 

HIGOLD, the latecomer, takes the lead. Focusing on functional hardware. Product advantages are function and design.

 

What kind of faucet is good?

 

Is it expensive? Seriously, price is one aspect of course. We must also consider these:

 

1. Faucet Cartridge

Cartridge is the heart of the faucet. According to the material, there are ceramic cartridges, stainless steel cartridges, and brass cartridges available on the market.

 

After the faucet has been used a long time, there may be a dripping problem. We may think the handle is not closed tightly or the handle is loose. In fact, the problem is often not the handle, but the cartridge hidden inside is beginning to age. The quality of the cartridge is a decisive factor affecting the service life of the faucet.

 

Ceramic cartridge is currently the mainstream cartridge on the market. It is wear-resistant, high-temperature and aging resistant, not easy to rust, good sealing, long service life, and less water pollution. Stainless steel and brass cartridges are also good choices. But bad brass and stainless steel materials are easy to rust, accumulate scale and affect water quality.

The Aquacubic cartridge is of higher quality than ordinary cartridges. It is made of ceramic and is integrally sealed with glue. It can adapt to various environments to ensure that the faucet will never leak under any severe conditions. It is durable, energy-saving and environmentally friendly.

 

 

2. Surface Coating

The surface coating is related to the corrosion resistance of the surface of the faucet.

In this regard, the electroplating corrosion resistance test in China is divided into 1-10 grades, and the tenth grade is the best. Aquacubic faucet can pass 24-hour acid salt spray test. The surface treatment reaches the highest tenth level. The surface should be smooth, and there is no uneven rough feeling. And it is corrosion resistant. 

Of course, if you want a better coating, you can choose anti-fingerprint brushed nickel finish. Through a special process, the surface of the faucet is not easily stained with fingerprint. The best choice for cleaning enthusiasts.

 

 

3. Main Material

The main material is the main part of the water flowing through. 

If the main material is not good, it will affect the quality of the water we drink! Two materials, brass and stainless steel, are more common on the market. It is worth noting that 59 brass is relatively high-quality brass material. Inferior brass may cause water pollution. Aquacubic faucet body uses 59 brass. In order to let customers use healthy water, we use low lead brass to minimize the precipitation of harmful substances in waterways and remove harmful heavy metals. Drink healthily and rest assured.

Pot filler faucets allow you to fill large pots and kettles directly on the stove, decreasing the …

Origin:Mainland China Feature:Single Cold Water Faucet Surface Finishing:Bronze Spout type:Retractable Installation Type:Wall Mounted Material:Brass Certification:CE Cold

Bathroom Basin Mixer Tap Black Basin Tap Single Handle Mixer Tap Brass Basin Faucet with Hot and Cold : Amazon.co.uk: DIY

Cefito Stainless Steel Kitchen Sink 600X450MM Under/Topmount Sinks Laundry Bowl Black Style Number: 513197 Today

Optimized Installation Designed with you in mind, Kraus widespread bath faucets include optimized features like hassle-free Snap Lock? installation that allows you to easily update your 3 piece bathroom faucet like a pro. The 3-step hose assembly connects with an audible snap, making DIY installation easier and more intuitive.

17/10/2018· 【Touchless Faucets】Automatic Infrared sensor control faucet, just put your hands under the water tap and the water will flow out in seconds. 【High Quality】The automatic infrared sensor faucet is made of premium zinc alloy and brass, the faucet is durable, not easy to rust and can be used for a long time.

Croydex Curved Shower Rod Aluminium Bright Chrome-Plated 2000mm (6199P) out of 5 stars (1) Simple Screw-Fix Installation 22mm Diameter Concealed Fixings €54.95 INC VAT Click

aluminum profiles manufacturer in China aluminum shower curtain rod Quality Choice