











For a more useful and faster-drying bathroom, toilet, shower, and washbasin must be separated.
The toilet, washbasin, and shower located in three areas allows people to use them separately.
This design has more advantages.
1. Dry area always being dry.
Using a three-separated bathroom, when the shower is completely independent, the sink and toilet area will not be affected by the shower. Cleaning is also more convenient.
2. More people can use the bathroom at the same time.
In the morning some want to use the toilet and some want to brush their teeth. If there is no separation, as long as one person enters, the whole family will have to wait.
However, with the three-separated bathroom, everyone can save time and use separately.
Three-separated Bathroom Layout
If the bathroom is a long and narrow shape, it is recommended that the toilet, washbasin, and shower are arranged in a row.
Usually the most frequently used washbasin will be placed in the middle, so you can come in and use it at any time. To the left and right are the shower area and toilet.
The toilet and the shower area can also be arranged on the same side, and the washbasin is placed on the opposite side to form a T-shaped arrangement. Hotels often use this layout, which is relatively confidential, but does not waste space.
If you want to add a bathtub, because the bathtub is used less frequently, it is usually placed in the corner next to the washbasin.
But to be honest, the three-separated bathroom requires a relatively large area. The partition wall will be added, and the distance between the shower, toilet and washbasin will be increased. If three separations are used, it is bound to reduce the size of other spaces.
Design and Construction Considerations
1. The minimum shower area wide is 90cm.
The shower area should be kept wide enough for the person to turn around, and hands should not touch the wall easily when showering. It is convenient to have a width of at least 90 cm.
2. The toilet area is at least 70cm wide.
If you don't want it too narrow when going to the toilet, the wall should not be too close. Starting from the center of the toilet, leave a width of 35 cm or more to the left and right to make it easy to use.
The human action is to turn around and sit down on the toilet, so 60 cm of moving space is required in front of the toilet.
3. If the toilet is adjacent to the shower area, the water pipe is easy to install.
When the toilet and the shower area are adjacent to each other back to back, the pipeline can be hidden in the partition between the two, and the distance of the pipeline can be shortened.
4. There is no need to install a floor drain in the toilet and washing area.
Since the three-separated bathroom has completely separated the toilet, washbasin and shower, and now fewer people will flush the floor. Therefore, it is only necessary to install a floor drain in the shower room. Blocking with waterproof strips can ensure that the toilet and washbasin area remain dry. For floor cleaning in dry areas, it is recommended to wipe with a mop.
5. Reduce the area of waterproof coating.
Ordinary bathrooms are usually recommended to do waterproof layer on the walls and floors of the whole room due to the spread of moisture. However, in the three-separated bathroom, there will be no excess water vapor in the toilet and washbasin area. It is recommended to do waterproof only half-height walls.
Then we take a look at the examples of the three-separation bathroom.
U-shaped Layout
This is a typical hotel bathroom layout. The sink is in the center, and the toilet, shower area, and bathtub are placed on both sides, forming a U-shaped layout. Suitable for use in large-area bathrooms.
The doors of the shower room and toilet area are designed with metal mesh, which is ventilated and can be cleverly hidden.
The walls and floors of the whole room are paved with the same marble. With metal accessories, the overall style is particularly high-end.
One-line Layout
With the double washbasin design, two people wash at the same time without being crowded. With double-sided mirrors and wall lights on both sides, it forms a balanced and symmetrical design.
The retro tile floor, the decorative pillars on both sides of the countertop, the delicate and elegant chandeliers, the natural and romantic simple European style.
Off-white is selected as the main color of the space, matched with earth-colored walls. The calm atmosphere makes the bathing space more comfortable and relaxing.
If you don't make a door, just use cement partition to separate the shower area or toilet, which can reduce the visual barrier.
A sliding door is used between the shower area and the bathtub, which can be ventilated at any time and can achieve the effect of privacy.
Two-line Layout
The washbasin area is in a single row. Since it is isolated from the shower area, it is relatively dry. The dressing storage is also set together, making it easier to use.
The wash area is in line with the toilet area. The bathtub is next to the shower area. Effectively separate the dry and wet areas. At the same time, hooks are installed on the wall for the towels and bathrobes.
If the bathroom does not have a window, you may wish to use colors and lights to brighten it up. The orange half-wall design makes the space bright and vibrant. Place some flowers and plants to make it more vibrant.
The wall is made of cement gray, so even if water drops splash off, it will not leave a trace. The mirror cabinet on the top can effectively increase the storage capacity.
In order to leave the central aisle, move the sink outside. Arranging the shower area and the toilet back to back not only effectively shortens the length of the water pipe, but also makes the design more concise.
In a typical T-shaped layout, the shower area and toilet are hidden behind the washbasin to maintain privacy. The wash area divides the bathroom into two parts.
The entrance of the bathroom is designed with arches, and the retro red bricks are more antique. The tiled floor extends to the left and right.
After reading the above cases, do you think it is good-looking and practical?
Thanks for viewing our website. Hopefully you can find your interested items. Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business. We are one-stop supplier of bathroom and kitchen products.
Ceramic sink is a kind of household goods. There are many kinds of sink materials, such as cast iron enamel, ceramics,
steel plate enamel, artificial stone, acrylic, crystal stone flume, etc. Most bathroom sinks are made from firecaly.
Ceramic sink is a kind of water sink which is made by integrated molding and firing. Its main body is mainly white.
It has the advantages of high temperature resistance, easy cleaning and aging resistance.
It can be wiped clean with cloth or clean metal ball in daily cleaning.
Step Ⅰ. Grouting
The production of ceramic sink is generally made by grouting.
The slurry is poured into a fixed die and allowed to solidify.
Step Ⅱ. Spraying Glaze
It is necessary to prepare qualified glaze slurry. Spray it on the surface of sink body.
Vitrify it into porcelain after firing; cover it on the surface.
Step Ⅲ. Forming
Forming is a drying process.
The process of further dehydration of semi-finished products.
Step Ⅳ. Preparation for Furnace
This is an important step before burning.
Workers need to check the surface & quality of the sinks and lay them together in trolley.
Step Ⅴ. Burning
Put the products on the kiln car according to certain proportion.
Based on the given temperature curve, sink will form finally.
Step Ⅵ. Storage & Logistic
With the development of storage & logistics industry,
we developed a complete solution for big size cargos.
There are no ifs in life, and even more for decorations. There is no what ifs after the decoration is finished. In order to avoid this kind of regret, we summarized many kitchen decoration experiences for you.
1. The most durable cabinet door panel is the fireproof panel, the shortest life span is the blister, the most non scratch resistant is the painted, the most expensive is the solid wood, and the cheapest is the double veneer.
2. The stainless steel countertop is the most durable, the artificial stone is the least resistant to dirt, and the quartz stone is the most expensive. If used frequently, stainless steel countertops are the most suitable. If the color tone is cold, you can use panels and tiles appropriately.
3. The stainless steel embossing countertop is less scratched than the brushed countertop.
4. The stove must have small openings on the surface to prevent the soup from overflowing into the stove.
5. The sink must have a bottom grid to prevent the sewer from being blocked and to facilitate cleaning.
6. When renovating water pipe and electricity, you must think about the cabinet layout and electrical requirements. Be sure to reserve enough sockets. It is better to keep sockets on the front and rear walls. Waterproof covers are not necessary.
7. If most of the gas pipes are wrapped in the cabinet, it is best to leave a gas alarm socket.
8. The tiles in the kitchen can be matte or polished, which are easier to clean. Don't choose pitted or rough models, which are difficult to take care of.
9. If you rarely cook, consider an open style. If cook much, it is safer to be closed. No matter how good a range hood is, it is impossible to suck all the fumes away.
10. The hose must be replaced every two years.
11. In addition to the main valve, it is better to have separate valves for gas stoves and gas water heaters, so that they can be closed easily when problems occur.
12. The sink drain must be made S-bend, otherwise the smell will return.
13. Do not apply glue between the stove and the countertop to facilitate safety inspection.
14. When installing the side range hood, it is better to be as close to the stove as possible.
15. If you install an ordinary or European-style range hood, it is better to install a thin stainless steel plate on the tile around the stove, so that it can be easily cleaned.
In China some people say that the struggle in the big city is so hard. Why not go to work in a small town? Is it worth struggling to afford a small apartment for a lifetime? I believe many people will find it worthwhile, because in big cities there are opportunities that cannot be found in small towns. The small apartment is not terrible. We can remodel it. As long as we have a dream, everything is possible. The owner Mr. Zhang who lives in Shanghai, like most ordinary citizens, worked hard all the way from the small hometown and finally settled in Shanghai and bought an apartment of 70 square meters. After having a child, Mr. Zhang took his parents from his hometown. A family of 5 squeezed into a small apartment. There was only one bathroom. Every morning and every evening, they were faced with taking turns to line up to take a bath and wash. They had no patience after some time. So he thought about making another shower room, and he can make the most of the balcony. Looking at the balcony that costs him a lot, only used to pile debris and dry clothes, Mr. Zhang felt it was a pity. He had heard of a case of transforming a balcony into a shower room before, so he wondered why not give it a try. If it fails, it will be dismantled after all. After talking to his wife, Mr. Zhang started serious research. After careful study, he summarized the following points to note:
First of all, it must be waterproof. Due to the special location of the balcony, the back may be the living room or bedroom. Considering that moisture may cause mold and peeling on the back wall, it is recommended that the waterproof layer of the wall where the shower is installed is painted as high as possible. The waterproof coating is generally brushed 2~3 times.
Second, make sure that the ground has a slope. The ground also needs to be waterproofed, and it is also necessary to ensure that the ground has a certain slope so that the sewage from the bath is discharged to the drain and will not flow back to the living room or other places.
Third, strengthen heat preservation. There is a big difference between the balcony shower room and the indoor shower room. Generally, the indoor shower room has only one wall with windows, and it can be kept warm by installing a heating system.
Finally, pay attention to the issue of privacy.
After studying how to install it, the next step is to choose a good shower room. Which products can meet this special demand? Because the balcony shower room is unavoidable from the wind and sun, we must pay attention to its material and anti-rust, anti-corrosion, and anti-fading ability. At the same time, pay attention to whether the frame is strong and stable, and the wall of the shower room must be strong.
After comparison, Mr. Zhang finally chose this shower room. This shower room is based on apartment space. The large apartment frame glass curtain wall, angular and cylindrical surfaces make the entire bathroom space richer.
At the same time, automotive-grade toughened glass has a thickness of 10MM, can withstand 700° high temperature, and has a high strength about 5 times that of ordinary glass, with outstanding impact resistance and thermal stability. In addition, EPM steel mold protection is added, so you don't have to worry about the risk of glass bursting. Even if it breaks, it will still stick to the debris to prevent the glass from splashing and hurting people. You can take a shower without restraint.
The door frame, handle and hinge outside the main body of the shower room are all made of high-quality aluminum alloy, and the surface should also be treated with anti-corrosion, anti-rust and anti-oxidation. In this way, there will be no signs of paint falling off after being exposed to the wind and sun on the balcony, and the structure is relatively strong and not prone to deformation.
In addition, the shower room is installed on the balcony. We will most worry about water will flow everywhere. This shower room has a overflow channel and magnetic tape, which can lock the water in all directions. Don't need to worry about getting the living room wet.
Although the bathroom is small, it is a very important part of the decoration and is closely related to our lives. Everyday life starts here and ends here; if the decoration is not good, it can drive you crazy every day. The toilet is broken, the shower is blocked, and so on.
In the process of using the bathroom, some problems are always prone to occur. Therefore, when decorating the bathroom, it is necessary to control all aspects of the details in order to avoid the impact of daily life as much as possible.
Four Matters Needing Attention in Bathroom Decoration
1. Spare more power sockets and water outlets
Many people often forget to spare more power sockets and waterways during bathroom decoration. Changing smart toilets and heated towel rails in the later period will easily cause inconvenience.
2. The problem of wall and floor tiles
Before laying the floor tiles, do a water leakage experiment for at least 24 hours. Go downstairs to see if there are any signs of water leakage. The floor tiles are aligned with the wall tiles. When laying the floor tiles, ensure that the brick surface has a slope of about 1°towards the floor drain.
3. Separate dry and wet spaces
If the bathroom does not separate from wet and dry, it is easy to cause the water in the shower to splash everywhere. Easy to slip and fall. It is not conducive to cleaning and can not keep the bathroom dry.
4. The problem of replacing ordinary toilets with smart toilets.
When installing an ordinary toilet, users generally did not consider the subsequent transformation of the water circuit, and did not spare a strong electric power supply, socket and water circuit in the toilet position. It will be more difficult to use a smart toilet in the future. The pit distance should also be considered when installing the toilet.
Six FAQ about Bathroom Decoration
1. Which is more practical, shower room or bathtub?
In general, the shower room should be more practical than the bathtub. The shower is timely, convenient and practical, and relatively hygienic. For ordinary families, many people use it only once a year after the bathtub is installed. Most of them are used to soak clothes and curtains.
2. Is the shower curtain easy to use?
For small apartments, the area of the bathroom is relatively small. Glass partitions can make the already small bathroom appear more crowded. If the shower curtain is used as a partition, the entire space becomes much more spacious after unfolding. The shower curtain can also realize the function of separating dry and wet, preventing water from splashing out of the shower.
3. Choose mosaic for bathroom decoration, or is pure black and white more practical?
Mosaic decoration effect is good, but the material price and labor cost are more expensive. If you want to install a towel bar or shelf where the mosaic is used, you can only choose to use the expansion screw method, and it is more difficult to use the suction cup type. Mosaic is not easy to take care of, and it is easy to hide dirt. So try to use it in dry areas.
4. How to choose above counter basin and under counter basin?
The above counter basins have many shapes, large choices and ideal decoration effects. The installation is simple and convenient, and the maintenance is convenient in the future. If it breaks, remove the glue and pick it up directly from the countertop to repair it. However, when using the above counter basin, the water is easy to splash outside. You have to wipe the countertop after washing your face. The key is that there are dead spots that are difficult to wipe. For people who do not have a laundry balcony and like to wash their clothes by hand, it is recommended to choose a larger and deeper basin. Washing your face is the next thing, and you have to have a place to wash your clothes.
The under-counter basin is embedded in the middle of the countertop, which is more beautiful than the above-counter basin, and the basin surface is lower than the countertop. Water on the countertop can be easily poured or wiped into the basin, which makes it more hygienic.
5. How to install floor drain and socket ?
The location of the floor drain needs to be carefully considered, preferably on one side of the floor. If it is in the middle of the bathroom, the floor drain will not be the lowest point no matter how the tiles are inclined. Setting up well the location of the floor drain can avoid the problem of water accumulation.
The socket should be designed with a switch, especially the socket of the electric water heater should be equipped with a switch. You also need to spare a few more next to the sink to charge the common appliances such as hair dryers, razors, and electric toothbrushes. Electricity safety has never been a small issue, so special attention must be paid!
6. Why install the bathroom exhaust fan ?
The bathroom at home is relatively humid, which can easily breed bacteria, which affects our health. So everyone will install an exhaust fan in the bathroom, which solves the problem of damp space and keeps the bathroom fresh air at the same time.
Towel bar: Towel bar is used to hang towels. The installation position is generally a position closer to the bath, and the installation height is generally 1.4 to 1.6 meters from the ground. The installation height should not be too low, otherwise the towel will get wet when bathing. The installation methods of the towel bar can be summarized into two types, one is to install without punching and the other is to install with emptying. Hole-free installation methods generally include vacuum suction cup type and watering type. Screws are generally used for drilling holes. Nowadays, many families prefer the non-punch vacuum suction cup installation, because it is easy to install, fast, and does not require much effort when disassembling. It does not cause any damage to the wall, but after a long time, it is easier to loose and fall off. The fixing force is not as strong as screwing. The watering type, as the name implies, is fixed on the wall with nail-free glue. It takes more time to install, but the cost savings are better than others.
Towel rack: The towel rack is used to place bath towels. The installation location is next to the towel bar or in an open position in the bathroom. You can design the installation location according to the characteristics of your own bathroom. The length and width of the bath towel are several times that of the towel. The height of the installation is naturally higher than that of the towel bar, but it mainly depends on the average height of the family members.
Toilet paper holder: The toilet paper holder is used to place toilet paper. It is generally installed next to the toilet. The installation position should be lower than the toilet. If it is installed higher than the toilet, you can imagine how inconvenient it is.
Toilet brush holder: The toilet brush is generally installed next to the toilet, and it is recommended not to install it next to the toilet paper holder. The toilet brush usually contains bacteria when cleaning the toilet, and then the air around the toilet brush has many bacteria, and the bacteria are easy to adhere to the paper towel.
Storage basket: The storage basket is generally installed near the shower, and is used to place items such as shower gel and shampoo for easy bathing. The installation height is generally one meter two to one meter four. These are just for reference, and are of no practical use. You can design according to your own habits and believe in yourself.
Clothes hook: The characteristics of stainless steel clothes hooks are reflected in high temperature and low temperature resistance according to physical properties, and corrosion resistance and not easy to rust according to chemical properties. They are expensive and expensive, and are suitable for bathroom use. Space aluminum clothes hooks are characterized by not easy to fade, good environmental performance, not easy to rust, and easy to dye. The clothes hooks made of space aluminum materials on the market are rich in colors, strong in decoration, and low in price. The disadvantage is that the pressure resistance is weak. Not suitable for hanging heavy objects, suitable for various places. The copper clothes hook itself has high material density and good stability, so it is not easy to rust, resists pressure and is heavy, and is more expensive in the market. It is suitable for kitchens, living rooms and other places. Aluminum alloy is made of pure aluminum with some alloying elements, so aluminum alloy hooks are slightly better than space aluminum hooks in terms of performance. Zinc alloy is an alloy formed by adding other elements based on zinc, so zinc alloy clothes hooks are characterized by good manufacturability, long use time and easy cleaning. Wooden clothes hooks have low immunity to humid environments, poor physical properties, but strong decoration, suitable for living rooms, bedrooms, study rooms and other locations. Plastic clothes hooks are easy to mold, so most of the plastic clothes hooks on the market are not only highly decorative but also low-cost. The disadvantage is that the surface is not resistant to dirt and it is inconvenient to clean.
When we buy, we must consider the actual situation at home. Choose the right size and the required rack. Don't buy the package blindly. Some things may not be useful.
For decoration, it is not easy to choose a suitable washroom basin. There are a lot of basins that are just plain useless.
Should we choose an over-counter, under-counter, integrated or pedestal basin ?
Let's take a look at the advantages and disadvantages of these basins and see which features are what we want most.
The bathroom is sometimes a dirty space, which is not easy to clean and take care of. The dampness, dirt, and bacteria can easily breed. Well, there may be cockroaches and spiders...
To keep the bathroom clean and tidy, the two most important points are: easy to tidy up and keep it dry.
If you choose basins based on these two points, let's analyze them one by one.
Basin Style
Above Counter Basin (Always Beautiful)
I stayed in a hotel once. The bathroom design was very creative. There are two wash basins. One is a normal under-counter basin, and the other is an above-counter basin with excellent artistic sense.
I use the under-counter basin for washing, but I always glance at the above-counter basin like a work of art.
Almost all such beautiful above counter basins can become an installation art in the home. For those who are pursuing art decoration, you can consider buying an above counter basin.
Under Counter Basin (Practical)
The embedded under counter basin and the "invisible" shape make the wash area look more refined and simple. This is probably a basin that many families use more often.
The basin connected with the countertop (Easy to Install)
The countertop and the basin are integrally formed, which saves a lot of trouble for cleaning. Because it is a modular grouping mode, the installation has zero pressure.
Semi-hanging Basin (Saving Space)
A semi-hanging basin is suitable for some customers, if we want to leave a little more space.
Pedestal Basin (Long Legs)
Especially suitable for use in small spaces.
Cylindrical Basin (Artistic Sense)
The cylindrical basin can be disassembled. Because it is straight-through, it is not easy to block. The disadvantage is that there is no countertop for placing bathroom accessories.
The selection of the basin also needs to be decided according to the specific design plan, such as shape, color matching, size and so on.
Finally, in order to keep this space dry and clean, we need to use a dry towel to wipe off the water in time, ventilate as much time as possible every day, and so on. Although it may seem troublesome, once you develop a habit, it will naturally be a lot easier .
Product Diversification
At present, the concept of sanitary ware products has far exceeded the traditional concepts of the past. As a symbol of modern and luxurious life, it has entered all aspects of people's lives. That is, it not only has sanitation and cleaning functions, but also includes health care functions, visual enjoyment, and entertainment functions. The shape of sanitary ware products has appeared in one-piece type, basin series, bidet, or table-top series, etc. In recent years, sanitary ware products have also launched a series of complementary products with additional functions such as leisurely bathtubs, cabinet basins, and steam shower rooms. Therefore, in the future, it is self-evident that the sanitary ware market will show a diversified development trend.
Build A Complete Accessory Manufacturing Base
Now due to the increase and enrichment of new functions of sanitary ware products, the sanitary ware production of developed countries has been involved in a large number of accessories.
Therefore, a mature sanitary ware industry should be supported by more varieties of accessories and additional products. For example, the production of raw materials, glazes, pigments, models, machining, instruments, meters, copper work, and packaging and decoration materials that are closely connected with many sanitary ware production systems should be incorporated into the entire production system as soon as possible. The sanitary ware production industry in China urgently needs to form a complete industry group and supporting group related to sanitary ceramic production, and form a processing base for various related accessories that are compatible with the end products.
The Comprehensive Functions of The Product Are More Prominent
According to the shopping psychology of consumers in the international market, a good sanitary ware product must be able to satisfy a modern lifestyle and have a relatively complete set of functions. For example, in addition to satisfying the use function, it also needs to solve multiple functions such as water saving, energy saving, environmental protection, comfort, health care, anti-aging, and intelligent induction, and has obvious recyclability and a strong concept of green consumption. This requires a new generation of products that must be able to make full use of comprehensive high-tech achievements such as biotechnology, electronic technology, and induction technology to combine various new functions to improve the comprehensive functions and physical quality of sanitary ceramic products.
Rich Decorative Colors
In the past, sanitary ware products were often decorated with white glaze to show their white jade-like appearance. But the cool tone of its color makes many people feel uncomfortable. Nowadays, it is generally recognized that various opalescent white glazes are mainly used for the appearance of products with other colors and shades. China sanitary ware factories should use the coordination of various glazes to create a variety of popular new decorative colors. The changing rhythm of sanitary ware products, just like the promotion of popular colors in major international clothing exhibitions in the world every year, shows the visual function of leading new trends in colors from time to time. With the continuous updating of people's aesthetic perspectives and the rapid changes in domestic and foreign market demands, it is necessary to accelerate the development of a new generation of glaze decoration varieties and strengthen the new color decoration of products.
In short, China sanitary ware factories must continuously improve the technical content of export products, and continue to improve the grade and added value of export products. Continuously develop a new generation of new high-end products to meet the needs of domestic and foreign markets. It is conducive to entering the international high-end market. It is believed that China sanitary ware factories will become stronger.