The bathroom area is small, but it needs to be equipped with sinks, cabinets, washing machines, showers and toilets. There is a new way by changing the water route in advance to move the basin outside the bathroom!
Simplify the Bathroom
If you want the washbasin to be outside the bathroom, the most feasible way is to move the door of the bathroom inward to ensure the privacy of the toilet and bathing area.
This approach is actually the traditional "dry-wet separation".
But the difference is that the original washroom door does not need to be installed, and the basin area and the outer area are more integrated.
A sliding door can be installed between the toilet & the shower area and basin, or a specially customized water resistant door. The floor tiles at the basin area can be designed as a unified design with the outside of the bathroom.
The laundry area and the basin are integrated on the outside, because it is not afraid of moisture, the towel basket does not need to be stuffed in the cabinet.
The overall space has not become more crowded by adding walls. Entering the door, the bathtub and shower head are immediately visible and easy to use.
Generally, ultra-thin lightweight partition walls are used, and waterproof coatings are also applied, so there is no need to worry about the partition walls being too thick or not moisture-proof.
Move the basin outside the door
The size and layout of the bathroom are not satisfactory, so let the washbasin truly stand outside the bathroom door!
Where should I install the basin outside the bathroom door?
First of all, it is recommended to be as close as possible to the original sink drain pipe, which is convenient for construction and saves labor and money.
Secondly, consider the habit of daily use of basins. For example, every morning, if you and your family can't wash and go to the toilet at the same time, put the basin near the bedroom.
You can brush your teeth and wash your face when you get up in the morning and go out.
If there is a corridor end or a concave wall near the toilet, it is most suitable to install the sink cabinet.
But it doesn't matter if there is no concave wall, self-built partitions are equally beautiful.
The lockers for bathing products can be placed above the basin together. In this way, the remodeled bathroom will be more refreshing and easy to take care of.
The wash basin can be placed on the balcony.
The wash basin is placed on the balcony because it does not occupy the kitchen and bathroom space, and it is convenient to dry the towels after washing.
Now that the water pipe has been connected to the balcony, you can also plan a good-looking basin. In addition to washing, water for watering flowers and boiling water can be obtained here.
For a family with one bathroom but three generations living together, one more basin can reduce a lot of inconvenience in life.
Make a simple-style balcony hand-washing area. It’s more convenient to wash your hands and fruits now.
Wash basins can be hung on the wall.
The washbasin can also be hung on the wall to play its function, but it will involve all kinds of wall drilling. And it can’t be moved after it’s built, so consider carefully before decorating it.
The best place to put a basin in the bedroom.
The cosmetic storage cabinet can be installed under the basin. Daily skin care, makeup, and makeup removal can be done easily.
If the toilet is close to the hallway, install a basin beside the hallway to enrich the functions of the hallway.
The dining room can also be equipped with an independent basin, and the water pipe can be taken from the kitchen at the beginning of the decoration.
Installing the basin outside the bathroom, in addition to being practical and convenient, can also match the overall style of the home. The washbasin can be integrated into the design of the cabinet, and the surrounding waterproof treatment should be done.
The common faucet materials on the market today are: stainless steel, plastic, brass, zinc alloy faucet, etc.
Brass is the most common material for faucet manufacturing. It is made of international standard H59/H62 copper. The casting adopts steel mold for gravity casting, and its wall thickness is uniform, generally 2.5-3.0 mm. The faucet made of brass is characterized by: no rust, durability, anti-oxidation, and sterilization effect on water.
The density of zinc alloy is lower than that of copper, and the handle is lighter. The surface of zinc alloy is easy to oxidize from the inner wall, and white oxide powder will appear on the surface. The strength is much worse than that of copper. The service life is not long, and the lead content is high. After one to two years, the faucet made of zinc alloy will oxidize and rot.
Plastic faucet has the characteristics of corrosion resistance, aging resistance, no rust, lead-free, non-toxic, odorless, high pressure resistance, light weight, easy construction, and low price. Plastic is not wear resistant.
Now health and environmental protection has gradually become the new themes of modern life. Stainless steel is an internationally recognized healthy material that can be implanted into the human body. Therefore, kitchen and bathroom products with stainless steel as the main material have begun to become popular in European and American countries.
More than 90% of high-end faucets are made of brass. Brass is the most suitable faucet material and has antibacterial effect. Among them, H59 copper is most used. Its lead content is qualified. H62 copper’s lead content is less and more corrosion-resistant. Although stainless steel can be lead-free, but the quality is worse than copper due to the complex process and no antibacterial performance.
2. Faucet Manufacturing Process:
Most of the faucets on the market under $20 are made of sand mold casting, which is commonly referred to as "sand foundry". The internal structure of the valve body metal is loose, and it is easy to form interior defects such as stomata. It may not be found in appearance. However, after a period of use, defects such as water leakage, inadequate sealing and even more severe defects will occur. High-grade faucets usually adopt gravity casting, and the internal structure of the valve body metal is dense. For the same valve body, the weight of the products produced by the two processes is different, and the consumption of materials is also different. The weight difference between gravity casting valve body and sand casting valve body is about 1/4. Therefore, the same product has different prices.
The faucet is turned on and off every day. The cartridge determines the service life of the faucet. At present, ceramic is the most suitable material for home use. The high-end faucet cartridge mostly uses ceramic, which is durable and can be opened and closed for 500000 times without leakage.
4. Water Hose:
The water inlet hose of the high-end faucet adopts pure 304 stainless steel. 304 stainless steel can bear high water pressure and ensure water purity.
The aerator of high-end faucet can give users a very comfortable bathing feel. The use of these accessories and materials can ensure the quality of the product. And whether or not to use the NEOPERL aerator is an important factor in judging the quality of the faucet.
6. Surface Technology:
The electroplated surface of high-priced faucets usually has a mirror-like feel. When you press it with your finger, the traces of hand prints will disappear immediately. Moreover, advanced environmental protection electroplating technology can prevent secondary pollution of products and ensure the purity of water.
7. Service Life:
The quality of high-end faucets is still good after 5 years of use, and meet all the national water-saving requirements. The durability, water-saving and environmental protection are its highlight value. Cheap faucets have a very short service life. After two or three months of use, quality issue may occur. And their safety is low.
8. After-sale Warranty:
High-end faucets are produced by professional manufacturers with a comprehensive after-sales service system. No matter the product has an accident or failure, the manufacturer or distributor will be responsible for solving it at any time. The manufacturers that provides higher price products are mostly more qualified, and they are very concerned about sales and reputation generated by each product.
All Aquacubic products that are finished in the production department have to pass their inspection first. There will also be the special inspection personnel to conduct an additional inspection to ensure that every product delivered to consumers is qualified.
Sanitary ware is a must-have for household life. With the improvement of people's living standards, the market has been expanding. And after years of development, China's sanitary ware output has become the world's largest.
Competition in the low-end market is fierce. And difficult to enter the high-end market.
In recent years, China's sanitary ware market has been in a state of rapid development.
However, most sanitary ware companies have not been able to keep up with the pace of development, and management and marketing have not been standardized. The quality of employees is not high. Only a few companies have operated some well-known brands and opened up channels. This leads to vicious competition between enterprises and the market is occupied by a very small number of large and well-known enterprises.
The disadvantages of small sanitary ware companies are even more obvious: small scale, single product, outdated equipment... seriously lacking in competitiveness.
And several large foreign brands not only control the high-end market, but also become more and more competitive in price. They are gradually penetrating into the low-end market, which is an unprecedented test for small and medium sanitary ware companies.
Secondly, various costs such as materials and labor are rising. The rising cost puts more and more pressure on sanitary ware companies. In the face of many competitors, they have to increase advertising investment. By compressing their own profit margins, try to gain customers and open up sales.
For sanitary ware companies, especially small and medium-sized enterprises, it is tantamount to worsening the situation.
Some people say that the Chinese sanitary ware market is "handed over" by the Chinese themselves.
Only by occupying the high-end market, the enterprises can have a position; on the contrary, the smaller the share, the lower the position.
It is understood that China has become the world's largest bathroom consumer market. The performance and quality of many domestic sanitary ware brands have reached or even surpassed that of foreign brands. However, foreign sanitary ware brands have almost monopolized China's high-end sanitary ware market with their strong financial strength and high brand awareness.
In addition to historical reasons, the lack of brand awareness of domestic companies is an important reason for this situation.
Sanitary ware has been continuously developed and improved. More and more consumers not only pay attention to product price, quality, and after-sales service when buying sanitary products, but also pay attention to brand awareness and business reputation.
If the company still stays in the business philosophy of the seller's market in the past, it will definitely be at a disadvantage in market competition, and even be ruthlessly eliminated by the market. The sanitary ware industry has entered the era of brand marketing.
Liberate the shackles and keep up with the times
According to statistics, China's annual demand for ceramic sanitary products has reached 34 million pieces. It has become the world's largest consumer market for sanitary products. Last year, the output of ceramic tiles and sanitary ware products reached 7.5 billion square meters and 177 million pieces respectively. They account for 60% and more than 40% of the world's total output of architectural sanitary ceramics. The annual growth rate of products exported to Europe, the United States, Japan, South Korea, the Middle East and other places is 50%.
From the analysis of this trend, the Chinese sanitary ware market is quite optimistic. With a large amount of rigid demand, it can be said that the market is very good.
However, due to the comprehensive factors such as rising raw material prices, rising labor costs, and continuous floods and droughts this year, the domestic ceramic industry is in a downturn.
In response to the frequent occurrence of "overcapacity" and "market saturation" in the industry, the profit margins of small and medium-sized bathroom companies will be further compressed. More and more rational consumers do not intend to pay for it. The pressure of product backlog is considerable, and some Chinese factories have to stop running some production lines.
The ceramic sanitary ware industry is still very traditional in terms of management and marketing. Employees lack technical expertise. Therefore, only a very small number of companies have relatively well-known brands and relatively complete sales channels.
Many companies' own sales channels and sales management are obviously not standardized enough, and marketing is weak. The sales of products depend on a good relationship with distributors.
In addition, many companies do not have the ability to operate brands, a systematic business model and a professional marketing team; no accurate market information; no customer-oriented service standards and customer-oriented service system; no market-oriented research and development, production, and supply system. The capital investment cycle is long and the risk is high. All of these will become a time bomb that puts enterprises at high risk, and may be deadly at any time.
In summary, it is not difficult to see that an enterprise's internal operation management system urgently needs to be established, and market standards urgently need to be standardized. In addition, companies can stop running part of the production line, digest inventory, and wait for the peak sales season. Because there is real rigid demand, as long as the product is done well, no matter how the market environment changes, a certain effect will eventually be achieved.
The following are three suggestions for improving the status.
Keep Up with Quality
At any time, the quality is everything and will not lag behind. Consumers who spend money on goods, especially a household product, will certainly not tolerate quality problems. Update production equipment and other infrastructure. Although the cost is high, if you don't invest, it's just waiting to die.
Sales Channel Expansion
In the past, the marketing of sanitary ware companies relied on good customer relationships to a large extent. Lacking the ability to operate the brand; there is no standard customer service system and professional marketing team. These all increase the profit risk of sanitary ware companies invisibly. This is also an important reason why many sanitary ware companies say that "the product is good, but it can't be sold."
Keep Up with Service
Compared with methods such as updating equipment and adding stores, the investment in service quality improvement is much lower than the previous two. Moreover, there are more and more high-quality sanitary products in China. Whether to develop high-quality, considerate and personalized services to bring customers a better service experience has become most important for the product to stand out.
In addition to the practicality of the apartment renovation, we also pay attention to its beauty. For example, choose wall-mounted toilets and washbasins; choose concealed baseboards; hide all the pipes; improve the overall aesthetics!
Concealed showers are more beautiful than exposed showers.
There are mainly the following 3 ways to install the shower:
1) Exposed installation: the water inlet pipe and mixing valve of the shower are exposed outside, which is not beautiful enough;
2) Concealed pipe installation: The inlet pipe is buried in the wall and the mixing valve is outside. This is most commonly used method;
3) Concealed installation: Completely opposite to the first type, the inlet pipe and the return valve are installed inside the wall. Leaving only the switch and the water outlet outside. Although it is beautiful, the process is complicated.
For concealed showers, there are also two different styles:
1) Top sprayer and hand shower
Look at the picture, the top shower head is matched with a hand-held shower head at the bottom. In this way, you need to determine the size of the shower head before renovation. And do the drilling and wiring layout. In terms of installation, this method is relatively simple.
2) With additional side spray
This is based on the former, plus a side spray function. During renovation, pre-installed in-wall boxes and multiple valve cores are required to match the water outlet. You can imagine how complicated this approach is! How to install it? Look down.
First determine the number of side nozzles (usually 2-6); the in-wall installed valve core has multiple outlet connection ports, from the valve core to the main water inlet, other outlets, top spray showers and hand showers; Secondly, cement leveling is required between the valve core and the wall, and in-wall installed parts are also used to stabilize; then leveling, waterproofing and pressing are performed to see if there is any leakage; the last step is to sticking ceramic tiles.
Compared with the exposed installation, the appearance of the concealed shower is certainly more attractive. However, the maintenance is complicated and cannot be ignored. The water pipe fittings of the exposed shower are all on the outside. If the concealed shower needs to be repaired, we can only break the wall! But if you choose a good quality shower, except for the water pipe problem, you don't need to break the wall under normal circumstances.
If you really like the appearance, it is not a big problem to choose a concealed shower. But if you are still worried about renovation and later maintenance, it is recommended not to try it.
Shower Purchase Skills
1. When choosing a shower, try to make the shower tilted (to see the water effect). If the top spray holes are obviously small or there is no water at all, it shows that the internal design of the shower is very low. It is impossible for the user to have a comfortable experience.
2. Look at the coating and valve core. Under normal circumstances, the brighter and more delicate the surface of the shower, the better the coating process. The high-quality shower uses high-quality ceramic valve core, which has high hardness and wear resistance, and is not easy to drip. The rotating adjustment handle is also very smooth.
3. Everyone knows that if the shower is used for a long time, there will be scale and impurities deposits, which will block the water outlet. If the mesh cover cannot be cleaned, the shower will not discharge water normally; in order to avoid the blockage of the water outlet due to poor water quality. All the shower nozzles should stick out for easy cleaning.
4. Shower accessories will directly affect the comfort of our shower. This cannot be ignored. For example, whether the lifting rod of the shower is flexible. Whether the shower joint is equipped with anti-twist ball bearings. Whether there is a rotation controller on the lifting rod, etc.
5. The water-saving function of the shower is the key point to be considered when purchasing the shower. Some showers use a steel ball valve core, and are equipped with a hot water controller, which can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. This type of shower with a reasonable design saves 50% of water compared to ordinary showers.
1. Do a good job of cleaning up during installation, especially the valve core. During the decoration, it is inevitable that decoration dust or even large particles of impurities enter the water supply pipe. If it is not cleaned up, these impurity particles will enter the valve core of the shower faucet, easily causing blockage or even destroying the internal structure of the valve core. If the shower has little water output, it is very likely that the cleaning work is not in place.
2. To ensure safety, equipotential terminals are indispensable.
An electric shock prevention system is indispensable in the bathroom: equipotential terminal. After all, compared with other spaces, the bathroom is accompanied by water all the year round, and the risk is relatively high. Connect with the equipotential terminal to prevent leakage, electric shock, and avoid dangerous situations.
There are a large number of shower options. So everyone can try to choose different showers. Traditional showers have gradually been eliminated. We must learn to keep up with the trend in renovation project.
Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers. The products include faucets, sinks, basins,
bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.
Look forward to cooperating with you.
Thanks a lot!
After the shower is turned off, the water still runs. Is it a quality problem?
Have you encountered a problem like this? After the shower was turned off, the water still ticked out. Sometimes after turning off for a long time, the water still flows out suddenly, and it flows fast. This is how it happened. Today, let's take a look at "The sudden water flow problem after the shower is turned off".
Regarding this problem, at first it was suspected that it was a shower quality problem. In order to clarify it, we also specially checked our showers, but this kind of situation still occurs. Later, we asked a professional to figure out that the water running after the shower was turned off was because of the water stored in the top spray and the shower pipe.
Professional explanation: In order to pursue the comfort of showering, the current shower head sprays are very large. The bigger it is, the more water there is after turning off the faucet. After use, the air pressure inside the shower is in equilibrium with the atmospheric pressure, so the water inside will not flow out temporarily. After some time, the water will flow out when the balance is lost. This is a problem with large-top showers. It is not that the shower is leaking or broken, so you can rest assured if you encounter this problem. If it is a constant dripping and leaking, then it is a quality problem.
So what should I do if the shower really leaks?
Analyze the factors of the shower leakage first. The main points are as follows:
1. The shower nozzle is blocked. If it is used for a long time, the water output will become smaller. If the water quality is not good, the water contains a lot of alkali, and scale deposits on the water outlet cause the shower to be blocked. At this time, it has to be resolved by the seller of the shower. Therefore, it is very important to choose a reliable seller.
2. Shower plating. Many people have found that the surface paint on the shower can peel off. It will be ugly after the paint is peeled off. If you have just bought a shower that has this problem, it will affect the appearance. In addition, some poor-quality showers will block because of paint falling off. So we have to take a closer look at the surface of the purchased shower for these problems.
When purchasing a shower, you must carefully observe whether the surface of the shower is smooth or not. If it is rough to the touch, it may be processed twice.
3. The material of the shower. Some showers are made of plastic or cast iron. The plastic shower head may contain a lot of waste material, and the service life will not be long. Of course, some hand showers that use plexiglass, ABS and other materials are still very good. However, it is not recommended that you choose the shower head made of cast iron, which is easy to rust. Many people who chose this shower are very regretful, because it didn't take long for it to rust. It's ugly, and it also blocked the water outlet and broke the entire shower. At present, the better material is copper.
After knowing the reason, we can come to a solution. There are mainly the following solutions for leakage in the shower:
1. Leakage at the steering ball of the shower head. First unscrew the shower head from the steering ball ring, find the O-ring or similar seal inside and replace it, and then turn the shower head back. Just go to the original position.
2. Leakage occurs at the joint of the handheld shower. Select the right size shower hose and shower head according to the specifications, replace its rubber ring, and reinstall it.
3. Water leakage caused by gravel or sediment. Unscrew the shower head for cleaning. If necessary, soak the parts with vinegar and scrub the parts. Take care to avoid scratching it. If the shower head is an adjustable spray type, carefully check all movable parts for signs of excessive wear. If the rotating handle cannot move smoothly, the internal cam may be broken, and the entire shower head needs to be replaced.
4. The spray mode from the shower head becomes a mixture of spray and rain mode. If the shower is used for a long time, the water output will decrease. It may be because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet cause the shower to be blocked. It is also very simple to solve. For the shower head designed with silica gel particles, just gently knead it. If the scale is serious, you can put white vinegar in a plastic bag, wrap the shower and soak for some time, then rinse with water.
Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers.
The products include faucets, sinks, basins, bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.
Look forward to cooperating with you.
Thanks a lot!
As a manufacturer of sanitary products for more than 11 years, we have seen many customers whose bathrooms are really full of functions. Although it is small, the functions are still very diverse. Have to admire!
Modern decoration requires both practical functions and individual style, so the budget is often difficult to control. The bathroom space usage rate is high. If you can save it everywhere, rework and repair will occur, and the gains will outweigh the losses. At the same time, the cost of furniture and decoration can also be spent more or less. The following are some small details on the bathroom decoration, which can save costs time and time again!
1) Waterproofing is essential for walls.
Waterproofing in the bathroom is very important, not only to choose high-quality materials, but also to ensure professional painting. The wall waterproof in the wet area should be at least 180cm above the ground and 50cm for other places. The ground waterproofing generally needs to be brushed twice and a 24-hour closed water test should be carried out. Wall corners, water pipes, etc. should also be carefully done.
Ceramic tiles are the highlight of bathroom decoration. And the wall area is large. You can choose relatively economical tiles to ensure the waterproof performance. You can also directly paint with waterproof paint where it is not in the shower area. It will reduce cost.
Mosaics with rich patterns can enhance the visual aesthetics of the space. And to reduce material costs and manual laying costs, mosaics can be laid only on key positions. Tiles, waist line and top line can be selected according to your own needs to control the cost of decoration.
The original light-body wall is removed and replaced with a transparent glass wall, which expands the visual area of the space and also saves costs.
Mosaic paving requires a high labor cost, so you can find a large mosaic-like wall tile to pave the wall, which can save a lot of money. Since there are fewer gaps between large-size mosaic tiles, the amount of caulking agent is correspondingly reduced, which is often used for reference and selection in home decoration.
2) The floor area should be beautiful and non-slip.
Safety should be placed in the most important position, and slip resistance should be considered in the selection of floor tiles. At the same time, the human body will directly touch the ground, so the quality of materials should be paid attention to. Bright floor tiles are relatively slippery, so use them as little as possible in the bathroom, and use matte floor tiles or tiles with good anti-slip properties.
When paving the floor tiles, the slope must be appropriate, and the floor drain must be the lowest point so that the water can flow smoothly. The floor tiles should be made of whole tiles as much as possible, and the gap between the tiles should be controlled at about 2mm.
The area of decorative tiles on the ground is smaller than that of the wall. The use of interval paving can save the budget, and only use the same pattern of tiles to be separated by more than one tile.
If you want to create a low-cost bathroom with a natural texture, you can use wood-grain tiles instead of waterproof solid wood, which also has the characteristics of natural patterns, elegant colors, and easier matching with other sanitary wares.
Paving decal tiles in the bathroom can improve the monotonous bathroom style. In the actual construction process, the cost of laying decal tiles is much cheaper than mosaic.
When special-shaped handmade tiles are laid on the ground, they should be from the inside out, the gap between the tiles should be controlled within 8mm, and the height of the caulking agent should be level with the tiles. The paving of this kind of tiles should be carried out in sequence according to the serial number on the back to avoid waste caused by rework.
3) Cleverly arrange the exposed and concealed sanitary ware.
The bathroom is a place where multiple channels of water and electricity converge. In the early stage of renovation, it is necessary to choose quality water pipes, wires, etc. And the wiring must comply with the regulations to avoid water leakage due to design and material selection problems.
As the space expands and functions increase, there are more and more electrical appliances in the bathroom. If you want to install smart toilet lids, integral shower rooms, massage bathtubs, multi-functional bathroom cabinets, etc., you must first make the sockets during the decoration to avoid rewiring in the future and increase the trouble.
The plumbing renovation of the bathroom is most laborious. If you want to save this part of the cost, the pipeline must be open-lined, without slotting, and future maintenance can also save a lot of costs.
In addition, avoid excessive wiring when rebuilding waterways and circuits. Use multi-hole sockets as much as possible on the panel of the socket. Under the premise of the same number of wires, you can plug in more electrical appliances. The wiring of the space is reconstructed with open wires, and the wires are routed from the top. The outer wall of the pipe is painted with waterproof paint, which saves a lot of labor costs and is also convenient for maintenance.
The bathrooms are uniformly decorated in black and white tones, simple and generous. The upper and lower water pipes of the sanitary ware are made of metal material, which has a long service life and is not easy to be damaged.
The space matching has been cleverly designed. The cement wall is matched with solid wood floor tiles, which is elegant and warm, satisfying practical functions and beautiful.
4) Shower Area
The quality of the glass used in the shower room is closely related to the safety of the bathroom. Fine tempered glass is generally difficult to break, and it will not hurt people when broken. Therefore, when choosing, don't be greedy for temporary cheapness, and try to choose high-quality, well-reputed brands.
The frame of the shower room is usually made of aluminum alloy, and the surface is sprayed with plastic, so it is not corroded or rusty. The thickness of the main frame aluminum alloy is preferably 1.1mm or more, which is not easy to deform.
In addition to professional brand shower rooms, the shower area can also be separated from dry and wet areas with various partitions. Common glass partitions only need to be installed on one side when combined with the wall, which saves costs by using less materials.
At the same time, the installation of the shower room can be omitted. The base of the shower room mainly plays the role of heat preservation and drainage, and the material is mostly acrylic.
The shower area is separated by a glass wall, and the ground is transitioned by steps to create a semi-enclosed shower space. The glass partition is directly fixed with hardware without reaching the top, which gives the space better permeability.
A wall serves as a partition, separating the wash area from the shower area. The interior of the wash area is covered with ceramic tiles, the exterior is painted with waterproof paint, and the key parts are strengthened.
5) Wash Area
The floor drain is most commonly used for sink, and the wall mount type can be used for more advanced spaces. It is best to have all S-bends to prevent upward odor. Basins are divided into above-counter basins, under-counter basins and wall-mounted basins. Above counter basins for households are more suitable and easy to install. The under counter basin is suitable for a large area bathroom, and the installation is relatively complicated.
Small-space or low-budget families can abandon the overall bathroom cabinet, and use a transparent iron frame to save space and leave more space for the legs. Mirror cabinets and recessed cabinets are more suitable for small spaces and complete the storage function of the bathroom. To reduce the cost of decoration, you can choose a single color and simple style in the decoration, and match it with retro copper-colored, metal-colored faucets or mirror lights to create highlights.
Build the washstand with cement, and place storage baskets underneath. The wall-mounted faucet is highly decorative, but the size must be measured accurately in advance, otherwise it cannot be installed, which will affect the use.
There is no special furniture under the basin; only metal racks are used to save costs and place toiletries.
Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We have rich experience and passion in bath and kitchen industry and appreciate your contacting and business. Look forward to cooperating with you. Thanks a lot!
There have always been a lot of worries about the bathroom. Generally, the size of the bathroom in a residence is 5-10 square meters, or even smaller. But to be comprehensive, toilet area, wash area, shower area are indispensable. The bathroom layout, design, and storage are not completely puzzled. Today we will teach you how to lay out the bathroom. Let's take a look at how other people solve such troubles!
For different bathroom spaces, the layout methods are different. Rectangular bathrooms are the most common, because such bathrooms are more convenient to separate dry and wet areas. Generally from the outside to the inside are: wash basin, toilet, shower room. The shower room is generally partitioned by a glass sliding door, which is very convenient to use.
It is difficult to design a square bathroom. Generally, the space is increased by reducing the length of the shower room. In the small square bathroom, the shower room is basically arranged on the opposite corner of the door, and then the wash basin and toilet are arranged in the corners on both sides. If the space is too small, you can only consider removing floor cabinets, bidets, bathtubs, etc.
Plan irregular spaces according to the size.
For irregular shape bathroom, item layout size is the key. According to the slight difference of different corner sizes, different functional areas can be planned, so that all the spaces can be used rationally.
For example, by adjusting the shape of the washstand or shower room, more space can be obtained.
Layout according to dry and wet separation:
The difficulty in planning a small-sized bathroom is the separation of dry and wet. If the wet and dry separation is handled well, the bathroom grade is also improved a lot. The following dry and wet separation methods are more common and reliable. You might as well learn from it.
Shower curtain + bathtub + water retaining strip:
This is the most economical way to separate wet and dry area. Modeling and installation are very simple. But take care to keep it dry after use. Otherwise, it is easy to mold and breed bacteria.
Shower room / retractable shower room:
It has good lighting and flexibility. When it is fixed in a corner, the glass partition can be unfolded, and it can be put away when it is not used, which can save a lot of space.
Glass partition + water retaining strip:
The glass partition material can well maintain the lighting effect of the bathroom and relieve the depressed feeling of the entire space. Generally used with water retaining strips. The elongated bathroom is very suitable. Glass partitions can also be used with low walls to ensure the privacy of the space and bring more light.
Move the sink out:
Move the original washing area directly to the outside of the bathroom. An interior door easily realizes the separation of dry and wet. The shower area and toilet area are reserved inside. It is also very convenient to arrange.
The bathroom storage can be squeezed out.
The location of the bathroom is not large, but if you make clever use of every hidden space, you will be pleasantly surprised to find that the space has become much larger!
Storage behind the door. Install a few bars behind the door to put towels or clothing. A hard wooden board is fixed above the door to store some infrequently used items. Don't let the toilet cosmetics be placed randomly. You can find a tray to store them neatly. The picture on the right is the correct way.
The double-layer shelf can hold more cosmetics.
Fix a magnet bar next to the mirror. Now you can put small hairpins and cosmetic tin boxes there. Never worry about losing your hairpin every day.
All kinds of beautiful jars and glass bottles can show their usefulness. Put in some long cosmetics such as powder brush and mascara. New skill!
Use a clip to hang the toiletries in a position within reach, which is easy to access and use.
Create an open bathtub. Place the toiletries in the bathtub sides and close it when not in use. There is no clue at all.
Place a ladder shelf with storage basket next to the bathtub. All items such as clothes, towels, and washing utensils are collected.
Especially suitable for families with babies. From now on, the toys will not be scattered all over the place.
The bathroom is very important and part of our lives. Let us take it seriously. Love life, start with a perfect bathroom.
How to choose bathroom accessories set?
1. Style matching: pay attention to matching with the overall decoration style of the bathroom.
2. The bathroom hardware should be purchased as a set, which is cheaper than the single purchase. One set of bathroom accessories with unified design of the series is more complete and stylish. Avoid mismatching.
3. The material is preferably stainless steel, and the surface is chrome-plated. The biggest advantage of stainless steel material is strong stability, high density, heavy weight, high ductility and plasticity. And it can be designed in various shapes. It is plated with a layer of metallic chromium, which is bright, waterproof and rust-proof.
4. Pay attention to these details when choosing.
Surface plating determines if towel racks can last forever. Generally speaking, the brighter and finer the surface, the more uniform the color, and the better the mirror effect, the better the coating quality.
Pay attention to the material of the base. The material of the base determines the strength of the load-bearing capacity. Most manufacturers use zinc alloy materials. If it is stainless steel, it depends on which standard stainless steel is used.
Good bathroom accessories have flawless appearance. Touch can make a certain judgment on the product quality. Smooth touch without burrs is good surface treatment performance. Pay special attention to corners, welding positions, etc.