China Faucet- Manufacturers Factory Suppliers From China

This article introduces the three main components of the faucet. It will help you to understand the quality and material of faucets we use everyday. Uncover all the mysteries of the faucet.

 

Part 1: Composition

The three most basic components of a faucet: main body, plating and cartridge.

01 Main Body

The main body is the torso part of the faucet. The water flows in and out of the main body all the time. So the material is important. It determines the water quality.

 

Copper Alloy Faucet

Copper alloy is currently recognized as the most suitable main material for home use faucet, and the mainstream is brass. On the one hand, copper has good machinability, fluidity and formability. On the other hand, because copper ions have a bactericidal effect, they can kill super bacteria such as MRSA within 30 minutes and prevent the bacteria from producing antibodies. The inner wall of the copper faucet will not breed bacteria and become the most suitable carrier for "water".

 

According to different proportions of copper content in copper alloys, copper alloy materials can be divided into 52, 55, 59 and 62 copper. Among them, 59 copper is the best. The content of copper metal is 58%-60%, the content of lead metal is 0.08%-0.2%, and the content of other elements is about 2%. The remaining metal is basically zinc.

 

Because lead metal will precipitate when water enters the faucet, it will pollute the water. If the lead content is too high, it is harmful to the human body. Therefore, some brand faucets use low-lead copper, that is, the lead content is less than 0.1%. In view of the fact that it is difficult for general consumers to judge the lead content, it is recommended to choose a faucet with a clear mark that uses low-lead copper.

 

Zinc Alloy Faucet

Zinc alloy is an alloy based on zinc and added with other elements such as aluminum, copper, magnesium, cadmium, lead, and titanium. Zinc alloy is easily corroded in water. After being corroded, the metal will be mixed into the water and cause harm to the human body. The biggest advantage is probably the low price.

 

Stainless Steel Faucet

The main components of steel are iron and carbon. Ordinary carbon steel is easy to rust. Adding chromium, nickel and other metals to carbon steel can make the steel corrosion resistant. Therefore, the most important factor affecting the corrosion resistance of stainless steel is the content of chromium.

 

Stainless steel has the advantages of acid resistance, alkali resistance, corrosion resistance, and no release of harmful substances (lead). But compared with copper, it has one of the biggest drawbacks, that is, it does not have antibacterial function.

 

Brief Summary

If the budget is sufficient, choose low-lead copper faucets. If you can't identify whether it is low-lead copper, choose a product from a big brand.

If you have a small budget, you can choose stainless steel faucets. The price will be cheaper. However, relatively there will be some problems. In particular, we must choose products from high standard manufacturers. After all, it's about your own health, don't be greedy for cheap.

 

 

02 Plating

The faucet is used in a humid environment, and its surface requires a good finish. The common surface treatment method on the market is electroplating, mainly including chrome plating, nickel plating, titanium plating and so on. In addition, there are some rarer methods such as baking varnish, porcelain, and imitation gold electrophoretic paint.

 

Chrome

Chrome plating is the most common faucet plating. Chromium is a white metal with a bluish color, which has high hardness and wear resistance. Its hardness exceeds even the hardest quenched steel, second only to diamond.

Chromium is not easy to change in a humid environment and can maintain the surface gloss for a long time. With a silver appearance, chrome-plated faucets are more popular with consumers.

 

Nickel

Nickel can quickly form a very thin passivation film on the surface of the faucet. Can resist the corrosion of water vapor and certain acids. Has excellent corrosion resistance and stability. Can resist the corrosion of water vapor and certain acids. Therefore, the stability of the nickel layer in a humid environment is very high.

Titanium Alloy

Titanium alloys are made by adding aluminum and tin elements or aluminum and vanadium elements to titanium. Electroplated titanium gold has the advantages of high strength, low density, strong toughness and good corrosion resistance. The surface of the titanium-plated faucet is as smooth as a mirror. Its golden luster looks elegant and rich, and very decorative. However, the process of plating titanium gold is complicated. It is very easy to absorb impurities during thermal processing. Therefore, the yield is low. The cost is also higher.

 

Baking Varnish

Baking varnish is to put two layers of coating on the faucet. Each time the paint is applied, it is sent to a dust-free constant temperature baking paint room for electric heating or far-infrared high temperature baking.

The surface of the baking varnish faucet is smooth and shiny, which can present a visual texture similar to that of a piano, making the whole product look very high-grade. However, compared with other surface treatment methods, baking varnish faucets are more prone to surface peeling. The durability is not as good as the traditional chrome-plated faucet. This method is not widely used.

 

Brushed

This treatment will make the surface of the faucet visually rough. However, it is quite delicate to the touch, showing a restrained beauty. The brushed process mainly relies on mechanical friction to produce several common textures such as straight lines, chaotic lines, threads, corrugations, swirling lines and intermittent silk lines on the surface of the faucet. It can also create matte, mirror, three-dimensional, embossed, satin and other effects.

 

Brief Summary

Appropriate surface treatment can make the overall shape of the faucet rich and full. Choosing the right faucet can also become the finishing touch to the bathroom decoration. It is pleasing to the eye.

There are generally multiple layers of plating. There are also some cheap faucets that are only coated one layer. The coating is not as thick as possible, but just right. If the coating is too thin, it will not be able to prevent corrosion. If the coating is too thick, it is easy to peel off. Copper + nickel + chromium is best. Copper can provide excellent adhesion. Nickel makes the coating have excellent corrosion resistance. Chromium makes the surface bright and flawless, and it is hard and scratch-resistant. Further improving the corrosion resistance. In addition, the faucet that has passed the 48-hour professional salt spray test will be more guaranteed in terms of corrosion resistance. Aquacubic's products have passed these tests.

 

03 Cartridge

The cartridge is a part that realizes the basic functions of direction control, pressure control or flow control by means of the rotation of the valve stem. The water flow enters the main body of the faucet through the cartridge and finally leaves the water outlet. The faucet used at home is turned on and off countless times a day. It can be seen that the quality of the cartridge is also very important to the faucet.

Ceramic Cartridge

The ceramic cartridge has less water pollution, good wear resistance and good sealing performance. Many high-quality faucets use ceramic cartridges. The ceramic chip must have good airtightness, stable physical properties, wear resistance, and long service life.

 

Stainless Steel Cartridge

The biggest advantage of the stainless steel cartridge is that it has a larger adjustable angle of rotation and is not easily affected by water quality. It is more practical to choose this type in areas with poor water quality. However, stainless steel has worse wear resistance compared to ceramic. After it is used for a long time, water leakage is prone to occur.

 

Roller Cartridge

Roller cartridges are old-fashioned cartridges. No matter in terms of price, water pollution or life span, they are inferior to ceramics and have been phased out. There are very few roller cartridge faucets on the market.

 

Part 2: How to Buy ?

After understanding the most important parts of the faucet, let's take a look at the precautions when purchasing.

 

01 The Weight

Faucets made of brass are heavier. So you can make a preliminary judgment by weighing the faucet. However, many manufacturers can increase the weight of low-quality faucets through some methods. So here is a commonplace saying, for consumers who can't distinguish the material, it is better to choose the leading brands. This is the simplest selection method.

02 The Surface

In sufficient light, carefully observe the electroplated surface of the faucet. Good electroplating looks as bright as a mirror, without any oxidation spots and burn marks, no pores, no blistering, no plating leakage, no burrs to the touch. After pressing the faucet, the fingerprints will spread out quickly, and it is not easy to adhere to dirt.

 

Breathing out the surface of the faucet. For products with good electroplating quality, the water vapor will quickly and evenly fade away. If the quality is not good, the fading speed will be slower, or not fade. The faster and more even the water vapor fades, the better the quality.

03 After-sales Service

The after-sales service of the product is very important, and it is also the guarantee for you to have no worries. Be sure to buy products with good after-sales service. The general faucet is guaranteed for at least 5 years.

 

When choosing a faucet, the most important thing is to look at the material, plating and cartridge of the faucet. Because the material determines the safety of the water. The coating can increase the service life of the faucet, so that the faucet has scratch resistance, corrosion resistance, and the surface brightness will be better. The cartridge is the heart of the faucet. Generally high quality faucets use ceramic cartridges. It has the characteristics of strong wear resistance and good sealing performance.

As a manufacturer of sanitary products for more than 11 years, we have seen many customers whose bathrooms are really full of functions. Although it is small, the functions are still very diverse. Have to admire!

 

Modern decoration requires both practical functions and individual style, so the budget is often difficult to control. The bathroom space usage rate is high. If you can save it everywhere, rework and repair will occur, and the gains will outweigh the losses. At the same time, the cost of furniture and decoration can also be spent more or less. The following are some small details on the bathroom decoration, which can save costs time and time again!

 

1) Waterproofing is essential for walls. 

Waterproofing in the bathroom is very important, not only to choose high-quality materials, but also to ensure professional painting. The wall waterproof in the wet area should be at least 180cm above the ground and 50cm for other places. The ground waterproofing generally needs to be brushed twice and a 24-hour closed water test should be carried out. Wall corners, water pipes, etc. should also be carefully done.

 

Ceramic tiles are the highlight of bathroom decoration. And the wall area is large. You can choose relatively economical tiles to ensure the waterproof performance. You can also directly paint with waterproof paint where it is not in the shower area. It will reduce cost.

 

Mosaics with rich patterns can enhance the visual aesthetics of the space. And to reduce material costs and manual laying costs, mosaics can be laid only on key positions. Tiles, waist line and top line can be selected according to your own needs to control the cost of decoration.

The original light-body wall is removed and replaced with a transparent glass wall, which expands the visual area of the space and also saves costs.

 

Mosaic paving requires a high labor cost, so you can find a large mosaic-like wall tile to pave the wall, which can save a lot of money. Since there are fewer gaps between large-size mosaic tiles, the amount of caulking agent is correspondingly reduced, which is often used for reference and selection in home decoration.

 

2) The floor area should be beautiful and non-slip.

Safety should be placed in the most important position, and slip resistance should be considered in the selection of floor tiles. At the same time, the human body will directly touch the ground, so the quality of materials should be paid attention to. Bright floor tiles are relatively slippery, so use them as little as possible in the bathroom, and use matte floor tiles or tiles with good anti-slip properties.

 

When paving the floor tiles, the slope must be appropriate, and the floor drain must be the lowest point so that the water can flow smoothly. The floor tiles should be made of whole tiles as much as possible, and the gap between the tiles should be controlled at about 2mm.

 

The area of decorative tiles on the ground is smaller than that of the wall. The use of interval paving can save the budget, and only use the same pattern of tiles to be separated by more than one tile.

 

If you want to create a low-cost bathroom with a natural texture, you can use wood-grain tiles instead of waterproof solid wood, which also has the characteristics of natural patterns, elegant colors, and easier matching with other sanitary wares.

 

Paving decal tiles in the bathroom can improve the monotonous bathroom style. In the actual construction process, the cost of laying decal tiles is much cheaper than mosaic.

 

When special-shaped handmade tiles are laid on the ground, they should be from the inside out, the gap between the tiles should be controlled within 8mm, and the height of the caulking agent should be level with the tiles. The paving of this kind of tiles should be carried out in sequence according to the serial number on the back to avoid waste caused by rework.

 

3) Cleverly arrange the exposed and concealed sanitary ware. 

The bathroom is a place where multiple channels of water and electricity converge. In the early stage of renovation, it is necessary to choose quality water pipes, wires, etc. And the wiring must comply with the regulations to avoid water leakage due to design and material selection problems.

As the space expands and functions increase, there are more and more electrical appliances in the bathroom. If you want to install smart toilet lids, integral shower rooms, massage bathtubs, multi-functional bathroom cabinets, etc., you must first make the sockets during the decoration to avoid rewiring in the future and increase the trouble.

 

The plumbing renovation of the bathroom is most laborious. If you want to save this part of the cost, the pipeline must be open-lined, without slotting, and future maintenance can also save a lot of costs.

In addition, avoid excessive wiring when rebuilding waterways and circuits. Use multi-hole sockets as much as possible on the panel of the socket. Under the premise of the same number of wires, you can plug in more electrical appliances. The wiring of the space is reconstructed with open wires, and the wires are routed from the top. The outer wall of the pipe is painted with waterproof paint, which saves a lot of labor costs and is also convenient for maintenance.

 

The bathrooms are uniformly decorated in black and white tones, simple and generous. The upper and lower water pipes of the sanitary ware are made of metal material, which has a long service life and is not easy to be damaged.

 

The space matching has been cleverly designed. The cement wall is matched with solid wood floor tiles, which is elegant and warm, satisfying practical functions and beautiful.

 

4) Shower Area

The quality of the glass used in the shower room is closely related to the safety of the bathroom. Fine tempered glass is generally difficult to break, and it will not hurt people when broken. Therefore, when choosing, don't be greedy for temporary cheapness, and try to choose high-quality, well-reputed brands.

The frame of the shower room is usually made of aluminum alloy, and the surface is sprayed with plastic, so it is not corroded or rusty. The thickness of the main frame aluminum alloy is preferably 1.1mm or more, which is not easy to deform.

 

In addition to professional brand shower rooms, the shower area can also be separated from dry and wet areas with various partitions. Common glass partitions only need to be installed on one side when combined with the wall, which saves costs by using less materials.

At the same time, the installation of the shower room can be omitted. The base of the shower room mainly plays the role of heat preservation and drainage, and the material is mostly acrylic.

 

The shower area is separated by a glass wall, and the ground is transitioned by steps to create a semi-enclosed shower space. The glass partition is directly fixed with hardware without reaching the top, which gives the space better permeability.

 

A wall serves as a partition, separating the wash area from the shower area. The interior of the wash area is covered with ceramic tiles, the exterior is painted with waterproof paint, and the key parts are strengthened.

 

5) Wash Area 

The floor drain is most commonly used for sink, and the wall mount type can be used for more advanced spaces. It is best to have all S-bends to prevent upward odor. Basins are divided into above-counter basins, under-counter basins and wall-mounted basins. Above counter basins for households are more suitable and easy to install. The under counter basin is suitable for a large area bathroom, and the installation is relatively complicated.

 

Small-space or low-budget families can abandon the overall bathroom cabinet, and use a transparent iron frame to save space and leave more space for the legs. Mirror cabinets and recessed cabinets are more suitable for small spaces and complete the storage function of the bathroom. To reduce the cost of decoration, you can choose a single color and simple style in the decoration, and match it with retro copper-colored, metal-colored faucets or mirror lights to create highlights.

 

Build the washstand with cement, and place storage baskets underneath. The wall-mounted faucet is highly decorative, but the size must be measured accurately in advance, otherwise it cannot be installed, which will affect the use.

 

There is no special furniture under the basin; only metal racks are used to save costs and place toiletries.

 

Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We have rich experience and passion in bath and kitchen industry and appreciate your contacting and business. Look forward to cooperating with you. Thanks a lot!

 

What kind of faucet is good?

 

Is it expensive? Seriously, price is one aspect of course. We must also consider these:

 

1. Faucet Cartridge

Cartridge is the heart of the faucet. According to the material, there are ceramic cartridges, stainless steel cartridges, and brass cartridges available on the market.

 

After the faucet has been used a long time, there may be a dripping problem. We may think the handle is not closed tightly or the handle is loose. In fact, the problem is often not the handle, but the cartridge hidden inside is beginning to age. The quality of the cartridge is a decisive factor affecting the service life of the faucet.

 

Ceramic cartridge is currently the mainstream cartridge on the market. It is wear-resistant, high-temperature and aging resistant, not easy to rust, good sealing, long service life, and less water pollution. Stainless steel and brass cartridges are also good choices. But bad brass and stainless steel materials are easy to rust, accumulate scale and affect water quality.

The Aquacubic cartridge is of higher quality than ordinary cartridges. It is made of ceramic and is integrally sealed with glue. It can adapt to various environments to ensure that the faucet will never leak under any severe conditions. It is durable, energy-saving and environmentally friendly.

 

 

2. Surface Coating

The surface coating is related to the corrosion resistance of the surface of the faucet.

In this regard, the electroplating corrosion resistance test in China is divided into 1-10 grades, and the tenth grade is the best. Aquacubic faucet can pass 24-hour acid salt spray test. The surface treatment reaches the highest tenth level. The surface should be smooth, and there is no uneven rough feeling. And it is corrosion resistant. 

Of course, if you want a better coating, you can choose anti-fingerprint brushed nickel finish. Through a special process, the surface of the faucet is not easily stained with fingerprint. The best choice for cleaning enthusiasts.

 

 

3. Main Material

The main material is the main part of the water flowing through. 

If the main material is not good, it will affect the quality of the water we drink! Two materials, brass and stainless steel, are more common on the market. It is worth noting that 59 brass is relatively high-quality brass material. Inferior brass may cause water pollution. Aquacubic faucet body uses 59 brass. In order to let customers use healthy water, we use low lead brass to minimize the precipitation of harmful substances in waterways and remove harmful heavy metals. Drink healthily and rest assured.

Buying a new bathroom sink faucet can be a challenging task. You have to consider many factors, such as installation, types, and finishes. 

Also, a wide variety of brands and faucets are available. The bathroom sink is a vital fixture, so selecting the correct faucet is essential. 

Here are the steps for how to choose a faucet for your bathroom sink.

3 Tips on Choosing a Faucet

1. Installation

If you want to switch from two handles to one, you have to think about the number of holes in the sink. 

Most sinks have three holes: one for the hot handle, one for the cold and one under the spout. 

Some single-handle faucets include a cover plate to hide the extra holes. But some don't, so check the label. 

If you currently have a “wide spread” bathroom faucet with two handles far from the spout, 

you can’t switch to a single-handle model.

2. Faucet Types

Ⅰ. Single-hole faucets combine the spout and mixing handles—often a single lever—into one unit that requires only one drilled sink hole. 

For retrofits, some models include a bottom plate that will cover existing three-hole openings. Single-hole faucets are ideal for smaller sinks, 

such as powder room baths. Their simplicity reflects modern sensibilities.

Ⅱ. Center-set faucets fit standard three-hole sinks (with outer holes drilled 4 inches apart). They'll have either a single lever or 

two handles mounted on a 6-inch plate. They're ideal for most bathroom sinks.

Ⅲ. Widespread mounts have three separate pieces: Two handles and the spout. 

The standard distance between the handles is at least 8 inches, and the three pieces tend to be larger than other types of bath faucets. 

Smaller versions, called minispreads, are designed for standard holes drilled 4 inches apart.

Ⅵ. Wall mount faucets have gained popularity along with freestanding or vessel-type sinks that require longer spouts 

that extend well over the top of the bowl. Not every faucet fixture can be easily categorized. Kohler, for example, 

makes a faucet that's integrated into a mirrored wall cabinet. 

All you see is the tiny flow control lever peeking out from the bottom of your mirrored self.

3. Faucet Finishes

Choose a finish that matches nearby cabinet hardware, towel bars, etc. Mismatches look bad. If you plan to replace existing hardware, 

your choice of faucet finishes is wide open. The vast majority of faucets have polished chrome, satin nickel or bronze finishes. 

All of these finishes are durable and keep their good looks for years. But some are more durable than others.

Chrome is the most durable finish and the easiest to keep clean-that's why it's always been the favorite 

for commercial kitchens and public bathrooms. If your faucet gets heavy use, it's your best bet for long-term toughness.

Nickel finishes are usually labeled “brushed,” “satin” or “stainless steel” and have a dull shine. 

They're durable but prone to fingerprints and water spots, so they're harder to keep clean. 

Some have a coating that reduces stains and smudges, but that coating isn't as durable as metal and may chip or wear.

Bronze faucets have a brownish tone and are often called “oiled” or “rubbed” bronze. 

But the surface is a coating (such as epoxy) rather than metal. 

This coating is tough stuff, but can be chipped or scratched more easily than metal.

Some faucets are used two or three years, and the water flow is intermittent or rusted into green. The handle is hard to be used for opening and closing. The size of the water flow depends on luck.

Some faucets have been used for 20 years, and the surface is still as smooth as new. The feel when adjusting the angle of the handle is still as silky as the chopsticks in a honey jar. The speed of the water flow are still adjusted as you like. So how can we pick a faucet that can last 20 or 30 years or more?

First, the kitchen faucet can be rotated 360°.

For ease of use, the kitchen faucet should be taller, and the spout should also be very long. It is best to extend above the drain and not splash water. If there is a hot water line in the kitchen, this type of faucet should also contain hot and cold hoses. In order to meet various needs, most of the kitchen faucets can rotate the body of the faucet left and right. The sprayer part of some faucet can be pulled out, which is convenient for cleaning to all corners of the sink.

 

Second, if the budget is enough, the material of stainless steel is preferred.

The material of kitchen faucet is generally brass, which is the most common faucet on the market. However. Due to the characteristics of the kitchen environment, pure brass faucets are not necessarily the best choice. All pure brass faucets have electroplating on the outermost layer, and the function of electroplating is to prevent corrosion and rust of the brass inside. There is a lot of oily smoke in the kitchen, and the greasy hands and cleaners on the hands when washing the dishes make it often necessary to clean the faucet. If you do not use the correct way to clean, it is likely to damage the electroplating layer of the faucet, causing the faucet to be corroded and rusted. If you want to choose an all-brass kitchen faucet, you must be sure to have excellent electroplating, otherwise it will easily cause the faucet to rust and corrode.

And now some manufacturers use high-quality 304 stainless steel to make faucets. Compared with pure brass faucets, faucets made of high-quality stainless steel are free of lead, acid, alkali, corrosion, and harmful substances, and will not pollute tap water. This is very important for drinking water in the kitchen; and the stainless steel faucet does not need electroplating, it is extremely difficult to rust, and the hardness and toughness are more than twice higher than that of brass products, so it is very convenient to clean. However, due to the high difficulty of stainless steel processing, the current high-quality stainless steel faucets are usually relatively expensive.

 

Third, pay attention to whether the length of the tap can clean the sinks on both sides.

When buying, pay attention to the length of the basin and the faucet sprayer. If it is a double sink, pay attention to whether the length of the faucet can clean the sinks on both sides when rotating. Most kitchen faucets can rotate the body of the faucet left and right, which is convenient for cleaning to all corners of the sink.

Some faucets are simple and practical, while others are decorative. Faucets can be in many different materials and shapes, such as short/high, single/double handle, stainless steel/brass, chrome/black/gold colors, etc. It can reflect the contemporary architectural decoration style. Also so many brands of faucets are available. Do you want to know the best faucet brands in China? Let's take a look at the ranking of China's top 7 faucets brands in 2020.

Ⅰ. MOEN

Moen entered the Chinese market in 1994 and established its first sales company in Waigaoqiao Free Trade Zone, Shanghai. In the following few years, American Moen company has established offices in Shanghai, Beijing, Guangzhou and Chongqing, and its sales network has covered more than 180 cities in China. In 1996, Moen set up a joint venture factory in China with global advanced production management and manufacturing technology, which shows its confidence in the Chinese market and its determination to develop in China for a long time. At the same time, all the factories in China have passed ISO9001 quality system certification and ISO14001 environmental system certification. Relying on the deep understanding of the needs of users, distributors, agents and professionals in the industry and the joint efforts of all employees, American Moen company has become one of the leading figures in China's kitchen and bathroom equipment industry, and has established a strong sales network and perfect after-sales service system. The company's business is developing rapidly, and its products are deeply loved by users.

Ⅱ. Jomoo

Founded in 1990 and headquartered in Quanzhou, Fujian Province: the Economic Zone on the west side of the Taiwan Strait, Jomoo Group is a large comprehensive bathroom leading enterprise and a national high-tech enterprise integrating R and D, production, sales and service. It is also the Secretariat of "Kitchen and Bathroom Hardware Sub-technical Committee of National Hardware Standardization Technical Committee". The group's brand "JOMOO" has won many national honors such as "China's Famous Trademark", "China's Environmental Label Product Certification", and has been selected into the government green procurement list for many times.

Jomoo group headquarter covers an area of more than 1.34 square kilometre. It owns 7 subsidiaries, 4 business divisions and more than 8500 employees. Since its establishment, Jomoo group has taken "creating healthy kitchen and bathroom life, making the earth environment better" as its mission. Through continuous scientific and technological innovation, Jomoo group has made great efforts to provide customers with safe and environmental protection, resource-saving products and high-quality services, and constantly improve and enhance the quality of home life.

Ⅲ. Hansgrohe

In 1995, Hansgrohe set up an office in Shanghai to introduce the world's top bathroom brand to China. Hansgrohe Sanitary Products (Shanghai) Co., Ltd., a wholly-owned Chinese subsidiary of Hansgrohe group. It was established in Shanghai Songjiang Industrial Zone. It is also the fourth wholly-owned factory invested by Hansgrohe abroad. 

2000: Hansgrohe sponsored the publication of the Chinese version of <The History of European Bathroom Culture>, which once again shows Hansgrohe's long-standing bathroom culture. 

2001: Hansgrohe celebrates its 100th birthday. Four offices have been set up in Shanghai, Beijing, Guangzhou and Chengdu; A total of 50 stores and 20 distribution points were set up, successfully occupying the high-end bathroom market; Many high-end residences and hotels use Hansgrohe products. The representative projects are Grand Hyatt Shanghai, Venice Shenzhen, Hilton Chongqing, Beijing Hotel, GE Times, etc.

Ⅳ. Kohler

Kohler, founded in 1873 and headquartered in Wisconsin, is one of the oldest and largest family businesses in the United States. Kohler is a global leader in kitchen and bathroom products, engine and power generation systems, furniture, home decoration, hotel services and first-class golf clubs.

As early as the 1930s, Kohler products had a deep relationship with China. Kohler sanitary ware was used in many famous buildings in Shanghai, such as Jinjiang Hotel and Da Guang Ming Cinema. In 1995, Kohler's China office was established in Hong Kong. Since then, Kohler has officially entered the Chinese market. In 1999, Kohler set up its headquarters in Shanghai and set up offices in Beijing, Shanghai, Guangzhou, Chengdu, Wuhan, Hangzhou, Nanjing and Shenzhen. Till today, Kohler has 10 factories, more than 500 regular exhibition halls and more than a dozen flagship stores in China.

Ⅴ. COSO

COSO originated in Germany. Since 1993 when it came to China to create a professional sanitary ware production base, COSO has created logical and beautiful product by virtue of German industrial design concept, first-class material, ergonomics benchmark, mathematical space, rigorous manufacturing and rational beauty. COSO has won the support and recognition of the majority of consumers. After years of development, COSO has become a global leading brand of healthy sanitary ware.

In the industry, COSO products take the lead in passing ISO9001:2000 quality management system certification and EU CE certification. It has won the titles of "China Top 10 Brands of Sanitary Ware", "China Top 10 Brands of Building Materials", "China Energy Saving and Environmental Protection Promotion Products", "China Famous Brand", and "China Original Bathroom Design Award in 2007”. In 2020, the company participated in Shanghai World Expo to fully demonstrate the value and strength of the brand.

Ⅵ. TOTO

TOTO was founded in 1917. It was initially named Toyo Pottery Co., Ltd., and then renamed TOTO Co., Ltd. In 1912, TOTO set up a laboratory specializing in the research and development of sanitary ceramics (at that time, sanitary ceramics products were very common in Europe and the United States, but wooden toilets were still popular in Japan, which was in great contrast with the advanced sanitary culture in Japan today). With the wide sales of these sanitary ceramics products, TOTO used its excellent products to challenge the traditional health concept which has been accepted by the public. Till today TOTO is still working hard for it.

TOTO is a manufacturer of sanitary ware and related equipment for civil and commercial facilities. Pursuing high quality and high technology, so that users can enjoy a sanitary, healthy and comfortable life is the consistent goal.

Ⅶ. Grohe

Friedrich Grohe AG CO. KG Group is a world famous supplier and global exporter of sanitary ware products and systems. Founded in 1936, it has branch offices, 12 production plants and 17 business subsidiaries in 140 countries around the world.

It adheres to the founder's spirit of precision and high quality. Its business covers most countries and its reputation spreads all over the world. Grohe has made remarkable achievements. With the company moving towards a new global environment, the total turnover of Grohe increased to 1.5 billion CNY in 2020, and the export volume accounted for 64.3% of the group's total turnover.

Ceramic sink is a kind of household goods. There are many kinds of sink materials, such as cast iron enamel, ceramics,

steel plate enamel, artificial stone, acrylic, crystal stone flume, etc. Most bathroom sinks are made from firecaly.

Ceramic sink is a kind of water sink which is made by integrated molding and firing. Its main body is mainly white.

It has the advantages of high temperature resistance, easy cleaning and aging resistance. 

It can be wiped clean with cloth or clean metal ball in daily cleaning.

Step Ⅰ. Grouting

The production of ceramic sink is generally made by grouting.

The slurry is poured into a fixed die and allowed to solidify.

Step Ⅱ. Spraying Glaze

Step Ⅲ. Forming

Step Ⅳ. Preparation for Furnace

Step Ⅴ. Burning

Put the products on the kiln car according to certain proportion. 

Step Ⅵ. Storage & Logistic

Let there be a lot of things outside, leave a corner quietly in the room. 

Under the dim sky, admire the bright moon. 

Talk about the wonderful life with your lover. 

Continue the romantic vow of "hold your hand, grow old with you".

Enjoy every inch comfortable cozy time with your heart.

Shakespeare wrote: "There are a thousand Hamlets in a thousand people's eyes." There are also a thousand homes in a thousand people's eyes. So what are the home design styles that current couples love? How to create a sense of happiness at home in the two-person world?

Choose Home Style:

01 Simple Style 

The world of young people is always simple and beautiful. The simple style is not only the simplification of design elements, but also the serenity, comfort and warmth of a two-person home.

02 Modern Style 

Sweet time is always quiet and happy. The modern style pursues the practicality and flexibility of the space. Through the mutual penetration of functional spaces, and the transparency of simple wide areas, it can give romantic couples more practical applicability.

03 Nordic Style 

The romantic two-person world is always sweet and warm. The Nordic style with logs and white as the main colors, from layout planning to detailed experience, gives people a simple, fresh and natural feeling. It adds points to sweetness.

Use Decoration Skills:

As a two-person home, it is necessary to clarify the living requirements before decoration design. Do a good job of space planning. Increase the functional area as much as possible, and pay attention to the following two decoration tips:

01 Choose Light And Medium Colors To Extend The Space:

Choose bright colors in an exclusive space suitable for two people to live in. The visual sense will be strong. In terms of color, light tones and intermediate colors should be selected as the basic tone of furniture, bedspreads, sofas, and curtains, supplemented by low chroma space. Extend the space to form a warm home atmosphere.

02 Choose A Uniform Material:

The home for two embraces warmness and brightness. The color of the ground can be used in the color system with strong brightness and low purity. Use pebbles to make its own guiding line. In the flowing atmosphere of light and shadow, feel the quiet time between two people.

Create A Home Style That We Love

 

01 Living Room:

As the most functional area in the home, the living room can not only meet guests and friends, hold small family gatherings, but also entertain and relax the body and mind. Before decoration, you can use the open design to expand the space in the living room. If you seldom meet guests at home, you can also change the living room to a study room to create a small and flexible two-person world.

02 Bedroom:

One-third of a person’s life is spent in sleep. The bedroom of two people should be kept in a clean and tidy color, interspersed with delicate small objects. Create a romantic and warm atmosphere, so you can feel the pleasure and relax as soon as you enter the room.

 

03 Kitchen:

Japanese writer Yoshimoto once wrote in "The Kitchen": "In this world, I think my favorite place is the kitchen." The expectation of a better life in the couple's room has been witnessed by the kitchen. Even if the space in the house is small, a small round table can be placed next to the sofa, which is enough to make the most romantic dinner for two people.

 

04 Bathroom:

As a frequently used area in the home, the bathroom is small, but it is a very important part of the decoration. If the decoration design is not in place, it will affect the happiness of family living. Therefore, before the decoration design, while focusing on individualized and practical design, it is also necessary to control all the details of the bathroom to prevent the lovers' daily life from being affected.

Recommend 1: Black Shower Head and Handle Set

A shower helps you wash away the exhaustion caused by a busy day’s work. While getting rid of the fluctuating water flow, enjoy a new comfortable shower experience. Let your body and mind get a great relaxation and rest. The water flow is smooth and not easy to be blocked, bringing a more hearty shower experience. The unique in-wall waterway design, simple silicone surface, and smooth lines make people feel friendly and comfortable, and also increase the overall beauty and sense of space.

Recommendation 2: Bathtub

 

At the end of a day's work, go home and soak in a comfortable hot bath. Lazy, relaxed and at ease. But many can't pick a bathtub, and worry about wasting space and interfering with the normal use of other bathroom functions. Don't panic. Aquacubic can help. A variety of product specifications can meet different needs. The soft arc, elegant design, and unique color matching enhance the fashion sense and decorative effect of the entire bathroom. The pure white color satisfies the sense of cleanliness. Enjoy the clean experience easily. When you take a bath, you can enjoy the moment of immersing your body in warm water, relieve fatigue and decompression, which greatly satisfies the lovers' pursuit of high-quality life.

 

Practical and comfortable household products simplify the steps of life, improve the quality of life, and enhance the sense of happiness in life. Work with Aquacubic to create a sweet and warm home for two people, enjoy the love and care given to each other, and let the love heat up.

In 2021 the U.S. kitchen and bathroom market is expected to reach $158.6 billion.

The United States is the world's largest importer of kitchen and bathroom products. For exporters of kitchen and bathroom products, the US market is very important. In January 2021, the National Kitchen and Bath Association (NKBA) released the "2021 Market Outlook Report". The report shows that the U.S. kitchen and bathroom industry will continue to grow, and the overall expenditure on kitchen and bathroom projects will increase in the coming year.

The industry predicts that after the overall decline of 5.9% in the U.S. kitchen and bathroom industry in 2020, it will reach 158.6 billion U.S. dollars in 2021, an increase of 16.6%, and an increase of 9% in 2018 and 1% in 2019. At the same time, it is expected that the growth of new houses will exceed 22%, while the renovation project will increase by 10%. High-end and mid-range projects are expected to lead, both of which are expected to increase by 20% than last year.

U. S. homeowners believe that the kitchen and bathroom area are twice as important as other spaces in the house. During the COVID-19 pandemic, the role of the kitchen is particularly prominent. 70% of homeowners believe that the kitchen is extremely important, compared to the previous proportion 64%.

With people's renewed attention to these family areas, the industry expects that large-scale interior renovation projects, including kitchen renovations, will usher in a new round of changes. This year may see a shift from the DIY in 2020 to the need for professional installers for kitchens and bathrooms. Many of these projects were delayed during the pandemic due to the risk of installation personnel carrying virus.

The report pointed out some motivations and inspirations to continue to promote the renovation project:

Although large-scale and more professional projects are planned to increase this year, saving money (attention 25%), project execution in leisure time (attention 23%), and health and safety issues (22%) are the main reasons for the increase in DIY.

Residents said that improving the aesthetics of the house was the main motivation for renovating the bathroom (16%) and kitchen (15%), followed by maximizing the quality and durability, and increasing the value of the house.

Houseowners pursuing cost-effectiveness and maximizing the use of existing budgets focus on renewing cabinets (52% of projects), plumbing (43% of projects), smart home products (57% of projects), and water purification systems (54% of projects) .

Family income and family member structure both affect the cost of kitchen renovation. "Mature families", that is, families with members over 45 years old and no children, have the highest percentage of upgrades to advanced functions in the kitchen.

Google search and social media are the main sources of inspiration for kitchen and bathroom renovations. Most owners stated that they rely on more than one source for inspiration. Young single homeowners or couples tend to rely more on Google and Instagram, while adults over 45 prefer to know what the other families did.

Economic factors that may affect renovation activities include:

1. A 10% increase in the operating rate of single-family housing in 2020 will drive a 17% increase in new residential building materials in 2021.

2. Of the total expenditure on residential kitchens and bathrooms, new houses accounted for 57%, reaching US$90 billion; residential renovations accounted for 43%, reaching US$68.6 billion.

3. Mortgage interest rates, which are about 1% lower than 2020, will continue to drive the home buying boom.

4. As the US houses for sale hit a record low, the price of stock houses will usher in price increase, which will indirectly promote house renovation rather than purchase of new houses.

5. The research report predicts that, driven by supply shortage and potential demand, total house prices will appreciate by about 31% between 2020 and 2023.

List of 10 Best Black Stainless Steel Kitchen Faucet 1. Delta Essa Single-Handle Touch …

This item: DeerValley DV-1K119 Farmhouse Kitchen Sink, 33" L x 20" W Apron Front …

Shop for PROOX 8" Widespread Double Handles Bathroom Waterfall Basin Faucet w/ Drain Assembly. Get free shipping On EVERYTHING* at Overstock - Your Online Home Improvement Outlet Store! Get 5% in rewards with Club O! - 36863819 Skip to main ...

Elkay DSESR127221 Dayton Single Bowl Dual Mount Stainless Steel Sink 249

Matte Black Sink Faucet Tall Waterfall Bathroom Basin Single Handle Vessel Mixer.

wall mount pot filler Shop Cyber Monday deals 1-48 of 243 results for "wall mount pot filler" RESULTS Price and other details may vary based on product size and color. Havin Brass Pot Filler,Pot Filler Faucet Wall Mount,Brass Material,with Double Joint Swing Arms (Style A, Black) 1,547 Cyber Monday Deal

August 15, 2019 4 min read Undermount kitchen sinks are one of the best options for you to consider if you love to provide your kitchen with a modern and elegant look. These sinks are attached right underneath your kitchen’s countertop. It allows you to easily clean your countertop and sweep all the crumbs right into the kitchen sink.

Modern Nano Sink For Kitchen Single Kitchen Sinks 304 Stainless Steel di Tokopedia ? Promo Pengguna Baru ? Cicilan 0% ? Kurir Instan. Beli Modern Nano Sink For Kitchen Single Kitchen Sinks 304 Stainless Steel di TopMaarket.