What are the advantages of the pull down kitchen faucet?
The pull-down kitchen faucet has the advantages of large cleaning range, 2 types of water outlet modes and automatic reset. It is more practical and comfortable to use than ordinary faucets, and the price difference is not much. Therefore, pull-down faucet is recommended. After all, the price is not expensive, it is more suitable to get it in one step, and it will be a lot more convenient to use.
Advantages of Pull Down Faucet
1. Large Cleaning Range
The pull-down faucet can not only be pulled out, but also can be rotated 360 degrees, which is much more convenient for washing countertops and pots.
2. Two kinds of Water Outlet Modes
The pull-down faucet has 2 water outlet modes, namely stream and spray modes. The spray shower type has a large and soft water range, which is suitable for washing fruits and vegetables. Don't worry about the impact of water on the fruits and vegetables to cause damage. The pull-down basin faucet makes it easy to wash your hair in the morning.
3. Precise And Automatic Return
The pull-down faucet has an automatic return function. After use, just release the faucet and it will automatically return to the main body. All series of pull-down faucets from Aquacubic are equipped with reflex control system, which can be pulled freely and return to position automatically after use. In general, the pull-down faucet is more practical and comfortable to use than the ordinary faucet, and the price is not much more expensive. Therefore, it is recommended that the newly decorated house can use the pull-down faucet. By the way, many have faucets that are particularly prone to water stains and fingerprint imprints. For this problem, Aquacubic has an anti-fingerprint series that does not leave fingerprints and water stains and is not easy to get oil stains. Just a quick wipe, faucet will be very clean. Even if it is not cleaned for a long time, it is always as new, which can reduce a lot of housework burden.
In China some people say that the struggle in the big city is so hard. Why not go to work in a small town? Is it worth struggling to afford a small apartment for a lifetime? I believe many people will find it worthwhile, because in big cities there are opportunities that cannot be found in small towns. The small apartment is not terrible. We can remodel it. As long as we have a dream, everything is possible. The owner Mr. Zhang who lives in Shanghai, like most ordinary citizens, worked hard all the way from the small hometown and finally settled in Shanghai and bought an apartment of 70 square meters. After having a child, Mr. Zhang took his parents from his hometown. A family of 5 squeezed into a small apartment. There was only one bathroom. Every morning and every evening, they were faced with taking turns to line up to take a bath and wash. They had no patience after some time. So he thought about making another shower room, and he can make the most of the balcony. Looking at the balcony that costs him a lot, only used to pile debris and dry clothes, Mr. Zhang felt it was a pity. He had heard of a case of transforming a balcony into a shower room before, so he wondered why not give it a try. If it fails, it will be dismantled after all. After talking to his wife, Mr. Zhang started serious research. After careful study, he summarized the following points to note:
First of all, it must be waterproof. Due to the special location of the balcony, the back may be the living room or bedroom. Considering that moisture may cause mold and peeling on the back wall, it is recommended that the waterproof layer of the wall where the shower is installed is painted as high as possible. The waterproof coating is generally brushed 2~3 times.
Second, make sure that the ground has a slope. The ground also needs to be waterproofed, and it is also necessary to ensure that the ground has a certain slope so that the sewage from the bath is discharged to the drain and will not flow back to the living room or other places.
Third, strengthen heat preservation. There is a big difference between the balcony shower room and the indoor shower room. Generally, the indoor shower room has only one wall with windows, and it can be kept warm by installing a heating system.
Finally, pay attention to the issue of privacy.
After studying how to install it, the next step is to choose a good shower room. Which products can meet this special demand? Because the balcony shower room is unavoidable from the wind and sun, we must pay attention to its material and anti-rust, anti-corrosion, and anti-fading ability. At the same time, pay attention to whether the frame is strong and stable, and the wall of the shower room must be strong.
After comparison, Mr. Zhang finally chose this shower room. This shower room is based on apartment space. The large apartment frame glass curtain wall, angular and cylindrical surfaces make the entire bathroom space richer.
At the same time, automotive-grade toughened glass has a thickness of 10MM, can withstand 700° high temperature, and has a high strength about 5 times that of ordinary glass, with outstanding impact resistance and thermal stability. In addition, EPM steel mold protection is added, so you don't have to worry about the risk of glass bursting. Even if it breaks, it will still stick to the debris to prevent the glass from splashing and hurting people. You can take a shower without restraint.
The door frame, handle and hinge outside the main body of the shower room are all made of high-quality aluminum alloy, and the surface should also be treated with anti-corrosion, anti-rust and anti-oxidation. In this way, there will be no signs of paint falling off after being exposed to the wind and sun on the balcony, and the structure is relatively strong and not prone to deformation.
In addition, the shower room is installed on the balcony. We will most worry about water will flow everywhere. This shower room has a overflow channel and magnetic tape, which can lock the water in all directions. Don't need to worry about getting the living room wet.
For decoration, it is not easy to choose a suitable washroom basin. There are a lot of basins that are just plain useless.
Should we choose an over-counter, under-counter, integrated or pedestal basin ?
Let's take a look at the advantages and disadvantages of these basins and see which features are what we want most.
The bathroom is sometimes a dirty space, which is not easy to clean and take care of. The dampness, dirt, and bacteria can easily breed. Well, there may be cockroaches and spiders...
To keep the bathroom clean and tidy, the two most important points are: easy to tidy up and keep it dry.
If you choose basins based on these two points, let's analyze them one by one.
Above Counter Basin (Always Beautiful)
I stayed in a hotel once. The bathroom design was very creative. There are two wash basins. One is a normal under-counter basin, and the other is an above-counter basin with excellent artistic sense.
I use the under-counter basin for washing, but I always glance at the above-counter basin like a work of art.
Almost all such beautiful above counter basins can become an installation art in the home. For those who are pursuing art decoration, you can consider buying an above counter basin.
Under Counter Basin (Practical)
The embedded under counter basin and the "invisible" shape make the wash area look more refined and simple. This is probably a basin that many families use more often.
The basin connected with the countertop (Easy to Install)
The countertop and the basin are integrally formed, which saves a lot of trouble for cleaning. Because it is a modular grouping mode, the installation has zero pressure.
Semi-hanging Basin (Saving Space)
A semi-hanging basin is suitable for some customers, if we want to leave a little more space.
Pedestal Basin (Long Legs)
Especially suitable for use in small spaces.
Cylindrical Basin (Artistic Sense)
The cylindrical basin can be disassembled. Because it is straight-through, it is not easy to block. The disadvantage is that there is no countertop for placing bathroom accessories.
The selection of the basin also needs to be decided according to the specific design plan, such as shape, color matching, size and so on.
Finally, in order to keep this space dry and clean, we need to use a dry towel to wipe off the water in time, ventilate as much time as possible every day, and so on. Although it may seem troublesome, once you develop a habit, it will naturally be a lot easier .
Although the bathroom is small, it is a very important part of the decoration and is closely related to our lives. Everyday life starts here and ends here; if the decoration is not good, it can drive you crazy every day. The toilet is broken, the shower is blocked, and so on.
In the process of using the bathroom, some problems are always prone to occur. Therefore, when decorating the bathroom, it is necessary to control all aspects of the details in order to avoid the impact of daily life as much as possible.
Four Matters Needing Attention in Bathroom Decoration
1. Spare more power sockets and water outlets
Many people often forget to spare more power sockets and waterways during bathroom decoration. Changing smart toilets and heated towel rails in the later period will easily cause inconvenience.
2. The problem of wall and floor tiles
Before laying the floor tiles, do a water leakage experiment for at least 24 hours. Go downstairs to see if there are any signs of water leakage. The floor tiles are aligned with the wall tiles. When laying the floor tiles, ensure that the brick surface has a slope of about 1°towards the floor drain.
3. Separate dry and wet spaces
If the bathroom does not separate from wet and dry, it is easy to cause the water in the shower to splash everywhere. Easy to slip and fall. It is not conducive to cleaning and can not keep the bathroom dry.
4. The problem of replacing ordinary toilets with smart toilets.
When installing an ordinary toilet, users generally did not consider the subsequent transformation of the water circuit, and did not spare a strong electric power supply, socket and water circuit in the toilet position. It will be more difficult to use a smart toilet in the future. The pit distance should also be considered when installing the toilet.
Six FAQ about Bathroom Decoration
1. Which is more practical, shower room or bathtub?
In general, the shower room should be more practical than the bathtub. The shower is timely, convenient and practical, and relatively hygienic. For ordinary families, many people use it only once a year after the bathtub is installed. Most of them are used to soak clothes and curtains.
2. Is the shower curtain easy to use?
For small apartments, the area of the bathroom is relatively small. Glass partitions can make the already small bathroom appear more crowded. If the shower curtain is used as a partition, the entire space becomes much more spacious after unfolding. The shower curtain can also realize the function of separating dry and wet, preventing water from splashing out of the shower.
3. Choose mosaic for bathroom decoration, or is pure black and white more practical?
Mosaic decoration effect is good, but the material price and labor cost are more expensive. If you want to install a towel bar or shelf where the mosaic is used, you can only choose to use the expansion screw method, and it is more difficult to use the suction cup type. Mosaic is not easy to take care of, and it is easy to hide dirt. So try to use it in dry areas.
4. How to choose above counter basin and under counter basin?
The above counter basins have many shapes, large choices and ideal decoration effects. The installation is simple and convenient, and the maintenance is convenient in the future. If it breaks, remove the glue and pick it up directly from the countertop to repair it. However, when using the above counter basin, the water is easy to splash outside. You have to wipe the countertop after washing your face. The key is that there are dead spots that are difficult to wipe. For people who do not have a laundry balcony and like to wash their clothes by hand, it is recommended to choose a larger and deeper basin. Washing your face is the next thing, and you have to have a place to wash your clothes.
The under-counter basin is embedded in the middle of the countertop, which is more beautiful than the above-counter basin, and the basin surface is lower than the countertop. Water on the countertop can be easily poured or wiped into the basin, which makes it more hygienic.
5. How to install floor drain and socket ?
The location of the floor drain needs to be carefully considered, preferably on one side of the floor. If it is in the middle of the bathroom, the floor drain will not be the lowest point no matter how the tiles are inclined. Setting up well the location of the floor drain can avoid the problem of water accumulation.
The socket should be designed with a switch, especially the socket of the electric water heater should be equipped with a switch. You also need to spare a few more next to the sink to charge the common appliances such as hair dryers, razors, and electric toothbrushes. Electricity safety has never been a small issue, so special attention must be paid!
6. Why install the bathroom exhaust fan ?
The bathroom at home is relatively humid, which can easily breed bacteria, which affects our health. So everyone will install an exhaust fan in the bathroom, which solves the problem of damp space and keeps the bathroom fresh air at the same time.
In addition to the practicality of the apartment renovation, we also pay attention to its beauty. For example, choose wall-mounted toilets and washbasins; choose concealed baseboards; hide all the pipes; improve the overall aesthetics!
Concealed showers are more beautiful than exposed showers.
There are mainly the following 3 ways to install the shower:
1) Exposed installation: the water inlet pipe and mixing valve of the shower are exposed outside, which is not beautiful enough;
2) Concealed pipe installation: The inlet pipe is buried in the wall and the mixing valve is outside. This is most commonly used method;
3) Concealed installation: Completely opposite to the first type, the inlet pipe and the return valve are installed inside the wall. Leaving only the switch and the water outlet outside. Although it is beautiful, the process is complicated.
For concealed showers, there are also two different styles:
1) Top sprayer and hand shower
Look at the picture, the top shower head is matched with a hand-held shower head at the bottom. In this way, you need to determine the size of the shower head before renovation. And do the drilling and wiring layout. In terms of installation, this method is relatively simple.
2) With additional side spray
This is based on the former, plus a side spray function. During renovation, pre-installed in-wall boxes and multiple valve cores are required to match the water outlet. You can imagine how complicated this approach is! How to install it? Look down.
First determine the number of side nozzles (usually 2-6); the in-wall installed valve core has multiple outlet connection ports, from the valve core to the main water inlet, other outlets, top spray showers and hand showers; Secondly, cement leveling is required between the valve core and the wall, and in-wall installed parts are also used to stabilize; then leveling, waterproofing and pressing are performed to see if there is any leakage; the last step is to sticking ceramic tiles.
Compared with the exposed installation, the appearance of the concealed shower is certainly more attractive. However, the maintenance is complicated and cannot be ignored. The water pipe fittings of the exposed shower are all on the outside. If the concealed shower needs to be repaired, we can only break the wall! But if you choose a good quality shower, except for the water pipe problem, you don't need to break the wall under normal circumstances.
If you really like the appearance, it is not a big problem to choose a concealed shower. But if you are still worried about renovation and later maintenance, it is recommended not to try it.
Shower Purchase Skills
1. When choosing a shower, try to make the shower tilted (to see the water effect). If the top spray holes are obviously small or there is no water at all, it shows that the internal design of the shower is very low. It is impossible for the user to have a comfortable experience.
2. Look at the coating and valve core. Under normal circumstances, the brighter and more delicate the surface of the shower, the better the coating process. The high-quality shower uses high-quality ceramic valve core, which has high hardness and wear resistance, and is not easy to drip. The rotating adjustment handle is also very smooth.
3. Everyone knows that if the shower is used for a long time, there will be scale and impurities deposits, which will block the water outlet. If the mesh cover cannot be cleaned, the shower will not discharge water normally; in order to avoid the blockage of the water outlet due to poor water quality. All the shower nozzles should stick out for easy cleaning.
4. Shower accessories will directly affect the comfort of our shower. This cannot be ignored. For example, whether the lifting rod of the shower is flexible. Whether the shower joint is equipped with anti-twist ball bearings. Whether there is a rotation controller on the lifting rod, etc.
5. The water-saving function of the shower is the key point to be considered when purchasing the shower. Some showers use a steel ball valve core, and are equipped with a hot water controller, which can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. This type of shower with a reasonable design saves 50% of water compared to ordinary showers.
1. Do a good job of cleaning up during installation, especially the valve core. During the decoration, it is inevitable that decoration dust or even large particles of impurities enter the water supply pipe. If it is not cleaned up, these impurity particles will enter the valve core of the shower faucet, easily causing blockage or even destroying the internal structure of the valve core. If the shower has little water output, it is very likely that the cleaning work is not in place.
2. To ensure safety, equipotential terminals are indispensable.
An electric shock prevention system is indispensable in the bathroom: equipotential terminal. After all, compared with other spaces, the bathroom is accompanied by water all the year round, and the risk is relatively high. Connect with the equipotential terminal to prevent leakage, electric shock, and avoid dangerous situations.
There are a large number of shower options. So everyone can try to choose different showers. Traditional showers have gradually been eliminated. We must learn to keep up with the trend in renovation project.
Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers. The products include faucets, sinks, basins,
bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.
Look forward to cooperating with you.
Thanks a lot!
There have always been a lot of worries about the bathroom. Generally, the size of the bathroom in a residence is 5-10 square meters, or even smaller. But to be comprehensive, toilet area, wash area, shower area are indispensable. The bathroom layout, design, and storage are not completely puzzled. Today we will teach you how to lay out the bathroom. Let's take a look at how other people solve such troubles!
For different bathroom spaces, the layout methods are different. Rectangular bathrooms are the most common, because such bathrooms are more convenient to separate dry and wet areas. Generally from the outside to the inside are: wash basin, toilet, shower room. The shower room is generally partitioned by a glass sliding door, which is very convenient to use.
It is difficult to design a square bathroom. Generally, the space is increased by reducing the length of the shower room. In the small square bathroom, the shower room is basically arranged on the opposite corner of the door, and then the wash basin and toilet are arranged in the corners on both sides. If the space is too small, you can only consider removing floor cabinets, bidets, bathtubs, etc.
Plan irregular spaces according to the size.
For irregular shape bathroom, item layout size is the key. According to the slight difference of different corner sizes, different functional areas can be planned, so that all the spaces can be used rationally.
For example, by adjusting the shape of the washstand or shower room, more space can be obtained.
Layout according to dry and wet separation:
The difficulty in planning a small-sized bathroom is the separation of dry and wet. If the wet and dry separation is handled well, the bathroom grade is also improved a lot. The following dry and wet separation methods are more common and reliable. You might as well learn from it.
Shower curtain + bathtub + water retaining strip:
This is the most economical way to separate wet and dry area. Modeling and installation are very simple. But take care to keep it dry after use. Otherwise, it is easy to mold and breed bacteria.
Shower room / retractable shower room:
It has good lighting and flexibility. When it is fixed in a corner, the glass partition can be unfolded, and it can be put away when it is not used, which can save a lot of space.
Glass partition + water retaining strip:
The glass partition material can well maintain the lighting effect of the bathroom and relieve the depressed feeling of the entire space. Generally used with water retaining strips. The elongated bathroom is very suitable. Glass partitions can also be used with low walls to ensure the privacy of the space and bring more light.
Move the sink out:
Move the original washing area directly to the outside of the bathroom. An interior door easily realizes the separation of dry and wet. The shower area and toilet area are reserved inside. It is also very convenient to arrange.
The bathroom storage can be squeezed out.
The location of the bathroom is not large, but if you make clever use of every hidden space, you will be pleasantly surprised to find that the space has become much larger!
Storage behind the door. Install a few bars behind the door to put towels or clothing. A hard wooden board is fixed above the door to store some infrequently used items. Don't let the toilet cosmetics be placed randomly. You can find a tray to store them neatly. The picture on the right is the correct way.
The double-layer shelf can hold more cosmetics.
Fix a magnet bar next to the mirror. Now you can put small hairpins and cosmetic tin boxes there. Never worry about losing your hairpin every day.
All kinds of beautiful jars and glass bottles can show their usefulness. Put in some long cosmetics such as powder brush and mascara. New skill!
Use a clip to hang the toiletries in a position within reach, which is easy to access and use.
Create an open bathtub. Place the toiletries in the bathtub sides and close it when not in use. There is no clue at all.
Place a ladder shelf with storage basket next to the bathtub. All items such as clothes, towels, and washing utensils are collected.
Especially suitable for families with babies. From now on, the toys will not be scattered all over the place.
The bathroom is very important and part of our lives. Let us take it seriously. Love life, start with a perfect bathroom.
Ceramic sink is a kind of household goods. There are many kinds of sink materials, such as cast iron enamel, ceramics,
steel plate enamel, artificial stone, acrylic, crystal stone flume, etc. Most bathroom sinks are made from firecaly.
Ceramic sink is a kind of water sink which is made by integrated molding and firing. Its main body is mainly white.
It has the advantages of high temperature resistance, easy cleaning and aging resistance.
It can be wiped clean with cloth or clean metal ball in daily cleaning.
Step Ⅰ. Grouting
The production of ceramic sink is generally made by grouting.
The slurry is poured into a fixed die and allowed to solidify.
Step Ⅱ. Spraying Glaze
It is necessary to prepare qualified glaze slurry. Spray it on the surface of sink body.
Vitrify it into porcelain after firing; cover it on the surface.
Step Ⅲ. Forming
Forming is a drying process.
The process of further dehydration of semi-finished products.
Step Ⅳ. Preparation for Furnace
This is an important step before burning.
Workers need to check the surface & quality of the sinks and lay them together in trolley.
Step Ⅴ. Burning
Put the products on the kiln car according to certain proportion.
Based on the given temperature curve, sink will form finally.
Step Ⅵ. Storage & Logistic
With the development of storage & logistics industry,
we developed a complete solution for big size cargos.
Buying a new bathroom sink faucet can be a challenging task. You have to consider many factors, such as installation, types, and finishes.
Also, a wide variety of brands and faucets are available. The bathroom sink is a vital fixture, so selecting the correct faucet is essential.
Here are the steps for how to choose a faucet for your bathroom sink.
3 Tips on Choosing a Faucet
If you want to switch from two handles to one, you have to think about the number of holes in the sink.
Most sinks have three holes: one for the hot handle, one for the cold and one under the spout.
Some single-handle faucets include a cover plate to hide the extra holes. But some don't, so check the label.
If you currently have a “wide spread” bathroom faucet with two handles far from the spout,
you can’t switch to a single-handle model.
2. Faucet Types
Ⅰ. Single-hole faucets combine the spout and mixing handles—often a single lever—into one unit that requires only one drilled sink hole.
For retrofits, some models include a bottom plate that will cover existing three-hole openings. Single-hole faucets are ideal for smaller sinks,
such as powder room baths. Their simplicity reflects modern sensibilities.
Ⅱ. Center-set faucets fit standard three-hole sinks (with outer holes drilled 4 inches apart). They'll have either a single lever or
two handles mounted on a 6-inch plate. They're ideal for most bathroom sinks.
Ⅲ. Widespread mounts have three separate pieces: Two handles and the spout.
The standard distance between the handles is at least 8 inches, and the three pieces tend to be larger than other types of bath faucets.
Smaller versions, called minispreads, are designed for standard holes drilled 4 inches apart.
Ⅵ. Wall mount faucets have gained popularity along with freestanding or vessel-type sinks that require longer spouts
that extend well over the top of the bowl. Not every faucet fixture can be easily categorized. Kohler, for example,
makes a faucet that's integrated into a mirrored wall cabinet.
All you see is the tiny flow control lever peeking out from the bottom of your mirrored self.
3. Faucet Finishes
Choose a finish that matches nearby cabinet hardware, towel bars, etc. Mismatches look bad. If you plan to replace existing hardware,
your choice of faucet finishes is wide open. The vast majority of faucets have polished chrome, satin nickel or bronze finishes.
All of these finishes are durable and keep their good looks for years. But some are more durable than others.
Chrome is the most durable finish and the easiest to keep clean-that's why it's always been the favorite
for commercial kitchens and public bathrooms. If your faucet gets heavy use, it's your best bet for long-term toughness.
Nickel finishes are usually labeled “brushed,” “satin” or “stainless steel” and have a dull shine.
They're durable but prone to fingerprints and water spots, so they're harder to keep clean.
Some have a coating that reduces stains and smudges, but that coating isn't as durable as metal and may chip or wear.
Bronze faucets have a brownish tone and are often called “oiled” or “rubbed” bronze.
But the surface is a coating (such as epoxy) rather than metal.
This coating is tough stuff, but can be chipped or scratched more easily than metal.