Durable Widespread Excellent 8 Inch Faucet- Factory Manufacturers Suppliers From China

Ordinary sink, also known as drawn sink, is formed by pressing and stretching a whole piece of steel plate.

The principle is similar to balloon blowing, so the bottom and corner of the water sink will be thinned properly, 

usually made of 0.8mm thick steel.

The Handmade Sink is not made piece by piece by hand, but made by cutting, bending and laser welding the steel plate.

Will not change the thickness of the steel plate in the corner, the sink is very sturdy and solid. Usually this thickness is 1.2-1.5mm.

The appearance has strong sense of line, and the weight is much heavier.

The small R angle of handmade sink is not only better in appearance, but also higher in the utilization of the whole sink space.

1. X Grooves Design

Optimized bottom slope makes kitchen sink draining faster than normal sinks. Gently sloped bottom, fast draining and dry after using.

Handmade X grooves design, not only increase the design aesthetic but also easy to drain water in a minute.

Rear set 3.5”drain matches most kitchen appliances and fits the most Common Garbage Disposal System and unlocks extra space.

2. Nano Surface Technology

Nano surface as Lotus leaf. Water and oil flow quickly and no trace left.

Hardness of Nano surface: ＞8H Hardness of regular surface: ＞4.5H

Extreme craftsmanship focuses on every detail of the sink.  Meets the UPC, cUPC, CE certification standards.

3. POSCO 304 SUS Material

Durable scratch and stain resistant stainless steel surface helps the beauty last.

Real 16 / 18 gauge material; never chip or crack. Commercial grade satin finish. Thick 304 Stainless Steel construction.

9 - 10 inches deep large sink can hold a lot of pots and pans. Experience the luxury brought by the global high-end manufacturing industry.

4. Soundproof Pad - 7pcs

Extra-thick coating and thick sound rubber pad assure exceptional noise reduction.

Insulative padding can dramatically reduce the noise causing by water dripping,making an excellent effect on noise elimination.

It can enhance the elegance and high quality of the kitchen, and it will become the focus of your kitchen. The high quality of the sink is praised and recognized by the most demanding customers

How to choose bathroom accessories set?

 

1. Style matching: pay attention to matching with the overall decoration style of the bathroom.

 

2. The bathroom hardware should be purchased as a set, which is cheaper than the single purchase. One set of bathroom accessories with unified design of the series is more complete and stylish. Avoid mismatching.

 

3. The material is preferably stainless steel, and the surface is chrome-plated. The biggest advantage of stainless steel material is strong stability, high density, heavy weight, high ductility and plasticity. And it can be designed in various shapes. It is plated with a layer of metallic chromium, which is bright, waterproof and rust-proof.

 

4. Pay attention to these details when choosing.

 

Surface Finish

Surface plating determines if towel racks can last forever. Generally speaking, the brighter and finer the surface, the more uniform the color, and the better the mirror effect, the better the coating quality.

Product Base

Pay attention to the material of the base. The material of the base determines the strength of the load-bearing capacity. Most manufacturers use zinc alloy materials. If it is stainless steel, it depends on which standard stainless steel is used.

 

Surface Touch

Good bathroom accessories have flawless appearance. Touch can make a certain judgment on the product quality. Smooth touch without burrs is good surface treatment performance. Pay special attention to corners, welding positions, etc.

Everyone's expectation of the bathroom is nothing but clean, bright, well-ventilated, and no odors. However, in real life, we will find that not all apartment types have such conditions.

 

For example, in some bathrooms without windows, various problems such as stuffiness, darkness, dampness, and stink are combined. So, since the house-type cannot be changed, is there a better way to save such a bathroom? Today we will share a few tips, maybe you will get some reference from them.

 

01. Ventilation

Ventilation of the bathroom is the top priority. If there is no fresh air in, it will not be able to replace the air inside. And it will be easy to breed more bacteria, causing the bathroom to be smelly and damp.

Generally we will install exhaust fans, together with the ventilation pipe to exhaust the air, and then let in the fresh air from outside.

However, the air volume of the exhaust fan is very small and can only achieve partial ventilation. If the air problem in the bathroom is serious, then a better fresh air system should be installed to continuously provide fresh air to achieve real air circulation.

 

02. Light

In view of the problem of insufficient lighting in the bathroom, there are actually many small coups. For example: In addition to the main light on the top, you can also add auxiliary lights.

 

It is a very practical way to use a large mirror + mirror front light to supplement the light source. One can produce uniform light, ensuring that every dark corner can be filled with light. Secondly, it is also helpful to washing and cleaning, to maximize the using of lights.

 

Moreover, the use of pure white tiles, plus the transparent glass partition, can solve this problem well. Visually improve the lack of light.

 

03. Waterproof

When decorating the bathroom, whether it is installing the basic sewer pipe, or the toilet, washbasin or faucet, careful testing and inspection must be carried out to prevent water leakage and trouble to daily use.

 

In order to prevent water leakage as much as possible, we must conduct the necessary closed water test after coating the waterproof material. In addition, try to buy high-quality floor drains, water pipes and hardware to ensure the comfort and cleanliness of the bathroom.

 

Of course, if you are diligent in cleaning, wipe off the water and stains on the countertop in time, and then use the heating and ventilation functions of the bath heater to remove moisture. Your home must be clean and refreshing.

04. Deodorization

Fully enclosed toilets are most likely to cause stinks. If the bathroom at home is comparable to a "public toilet", what kind of experience will it be?

In fact, the problem of deodorization can be basically solved by achieving waterproof and ventilation. But at the beginning of the decoration, one thing that cannot be ignored is the use of U-shaped sewer pipes to form a water seal to eliminate the odor from the source.

In addition, after using the toilet, close the toilet and flush the toilet in time, and clean up the floor drain and debris in time, all of which can play a role in eliminating odors to a certain extent.

05. Dry and Wet Area Separation

Nowadays new houses generally do the necessary dry and wet function separation. Use glass or other partitions to separate the dry area from the wet area, and eliminate a series of hidden dangers during use.

 

But the old house does not have "dry and wet separation", so it is often separated by a shower curtain. Such an approach is of course better than nothing, but not only can it not effectively isolate water vapor, but it will also easily multiply bacteria. Humidity and odor are inevitable.

 

If space conditions permit, you might as well install a light tempered glass, or open a small window above the wall. After communicating with neighbors and property, improve the bathroom environment at home.

 

However, due to issues such as building spacing and bathroom orientation, the actual operation is still relatively difficult.

 

In fact, no matter how good the original conditions are, and no matter how clean and fresh the bathroom is, if the people who live in it have bad hygiene habits and pile up clothes and sundries in it, the bathroom environment will not be good! If you want to get rid of the distress caused by the bathroom, you must be a diligent cleaning person. With the several solutions provided above, we hope to help you who have windowless bathrooms.

Home decoration is troublesome. Apart from other things, it may be very troublesome to choose the toilet. Although all the toilets on the market only have one function, there are many types. Choose from product details when purchasing. Know these 5 tips before buying a toilet.

 

1. Tips for Buying a Toilet

1) When selecting, you can tap the outer wall of the toilet gently with your finger. If the voice is hoarse, not clear and loud enough, then the toilet is likely to be internally cracked, or the toilet itself is not burned well.

2) The quality of the toilet depends on the quality of its ceramics. A good ceramic surface is uniformly lubricated and has a soft color. Gently touch the surface of the toilet with your hand. The glaze and embryos are delicate, indicating that the toilet is of good quality; for low- and medium-grade toilets, the glaze is rough and the color is dim, and small holes will be found under the light.

3) Pay attention to the return curve and water tank. Choose a glazed one, so that it is not easy to hide dirt and is easy to clean. When selecting, you must reach into the toilet's drain and touch it to see if the interior is smooth. A good toilet manufacturer will not ignore these two details.

4) Choose a toilet that is washable, otherwise you will definitely worry about cleaning the toilet in the future.

5) Test the flushing effect of the toilet pipe. Under normal circumstances, you must first try flushing before buying a toilet. There are some optimized flushing systems that can control the noise decibels below 50 decibels, which is very suitable for families with babies.

 

2. Precautions for Purchase of Toilet

1) The maximum flushing volume is below 6L.

2) Its own weight is above 40 kg.

3) Requirements for accessories: there is a delay water inlet valve; the water level difference is within 3mm; the water pressure has a wide range of application.

4) The height of the water seal is 55-60mm.

5) It is preferred that the inner side of the S-curve is also glazed on the toilet.

3. Precautions for Purchasing Smart Toilets:

1) It is recommended to select the instant heating method.

2) The impulse type is recommended for the water outlet method.

3) With power-off flushing function.

4) In addition to hot water washing and hot air drying, there are six mandatory functions: constant water temperature, sensor switch cover, night vision lighting, automatic deodorization, seat heating and seat bacteriostasis.

 

4. Shower

The shower can be divided into multiple product types according to the water outlet method, installation height, style, etc. When purchasing, pay attention to choosing the most suitable one.

How to judge the shower:

When buying a shower, first find out whether the water effect is good. Secondly, look at whether the surface coating is bright and smooth. Then check whether the shower valve core is made of ceramic, smooth and frictionless. Finally, see whether the shower accessories are appropriate and whether the quality meets the requirements.

 

Precautions for purchase of shower head:

1. It is recommended to choose ceramic valve core for ordinary shower.

2. Copper is recommended for the main body. Choose at least 59-1 copper, with 59% copper and 1% lead. It is recommended to choose CUPC certified showers.

3. It is recommended to choose a shower set with a lifting bracket and a bath faucet.

4. For those who like top spray and large water output, it is recommended to choose a concealed shower system.

5. Most of the items marked with "pressurized shower" achieve the "pressurized" effect by reducing the water outlet, and it is not very comfortable.

 

5. Bathtub

Before deciding to buy a bathtub, the first thing you need to consider is to choose the size of the bathtub according to the area of the bathroom, and set the height of the water outlet. It is also necessary to consider the particularities of family members, such as children, the elderly, and the disabled. When choosing a bathtub, it is best to choose a lower one, and you can also install handrails in an appropriate position. The bathtub itself should also have anti-slip treatment and so on. Relatively speaking, bathtub selection is more complicated.

 

Bathtub Purchase Skills

Gloss: understand the pros and cons of the material by looking at the surface gloss;

Smoothness: Check whether the surface of the bathtub is smooth by hand;

Firmness: the firmness can be tested by pressing by hand or stepping on the foot;

Sound: It is best to test the water to listen to the sound before buying. Don't choose a bathtub with too much noise.

 

Precautions for Purchase of Bathtubs:

1) The bathtub area is not very big. It only needs 1.2 square meters to install a standard bathtub.

2) The one-piece bathtub without separation is more practical.

3) It is better to have a hair filter in the water.

4) When choosing a bathtub with massage, bubble or mixed functions, you must try it first, and then choose the one that suits you.

5) Before the completion of the installation, the water storage and discharge experiment must be done under the standard water pressure, and both cold and hot water must be done.

6. Shower Room

Precautions for purchase of shower room:

1) It is recommended to choose anti-fingerprint treated stainless steel for the frame material.

2) It is recommended to choose a sliding door for the shower door. It has advantages over flat doors in terms of space occupation, convenience, and safety.

3) The recommended thickness of tempered glass is 8mm, and the minimum is no less than 6mm.

4) The quality of tempered glass is critical. Need to know about glass manufacturers and choose factories with CCC certification.

 

7. Bathroom Cabinet

Bathroom cabinets mainly include solid wood bathroom cabinets, ceramic bathroom cabinets, PVC bathroom cabinets, and acrylic bathroom cabinets. The solid wood bathroom cabinet is made of dehydrated solid wood as the base material. It has an exquisite appearance, high grade and good waterproof performance. However, solid wood bathroom cabinets are bulky and prone to cracking and require good maintenance.

Ceramic bathroom cabinets are relatively clean in appearance and easy to take care of, but they are easily damaged. The appearance of PVC bathroom cabinet is more shiny, and the cabinet is lighter, and the waterproof performance is the best. However, PVC bathroom cabinets are easily deformed when subjected to a collision. Acrylic bathroom cabinets are similar to PVC bathroom cabinets, but are more brittle than PVC cabinets, and are prone to scratches and cracks.

Bathroom cabinet selection method:

1) Check whether the bathroom cabinet is damaged, cracked or deformed.

2) Check whether the glazed surface of the bathroom cabinet is flat and whether the surface is cracked.

3) Check whether the various parts of the bathroom cabinet are tightly connected and whether it is used smoothly.

4) Look at the anti-fouling ability of the bathroom cabinet, which can be tested by scribbling and erasing.

 

Precautions for bathroom cabinet installation:

1) If you have not done in-wall inlet and outlet pipe renovation, it is recommended to choose floor-standing solid wood cabinets.

2) It is recommended that bathroom cabinets with a width of 1.4 meters and above adopt the design of double basins.

3) If the feet of the bathroom cabinet are made of wood, it is recommended to use a thin rubber pad to separate them from the floor.

 

When installing, there should be a 1cm gap between the bathroom cabinet and the wall to prevent the back panel from contacting the wet wall for a long time to cause get mouldy.

Small space bathrooms are always accompanied by a bunch of problems, such as area, lighting, and style. Our suggestion is to use all-match white, plus some tips to expand the space.

Now try to create a small white bathroom in five steps, and experience the new space immediately.

 

Step1  How to choose white bathroom sanitary ware ?

 

The most classic color in a small space is none other than white. Simple and pure at a glance. It can expand the space visually. When you consider a bathroom with all white as background color, it is best to choose different types of white. It will be better than a single white. You can choose light porcelain colored bathroom fixtures with whiter  countertops or water baffles, and then use some transparent glass or plaster accessories.

 

For bathrooms with white tiles, the gaps between the tiles can be filled with gray or black beauty agent to form regular checkered lines. The contrast of black, gray and white gives the space a stylish sense of depth. As long as you pair with simple solid-color items or mirrors, the space will immediately become active. 

Use sanitary ware to increase the level. Choose white bathroom ware on different materials, such as matte, brushed, textured or smooth texture materials, the effect will be different. If bright white is chosen for the toilet, basin and bathtub, matte tiles are best around the bathtub and for the basin flap. The countertop is preferably frosted stone.

 

Step2  The small bathroom should be compactly laid out.

The white background magnifies the vision, but in order to be more comfortable in the bathroom, we need to find ways to improve the small bathroom. Resolve space embarrassment with reasonable layout. The multifunctionalization of items, the combination of bath mirrors and wall cabinets, the sharing of bath and shower areas, and the use of new smaller toilets, etc., can save space. Paving strips of tiles or wall panels, or choosing a light hand basin can also increase the bathroom space and make the bathing experience more comfortable.

 

The bathtub and shower area are combined in one. The combination of shower and bath area saves space and provides more space possibilities for small apartment design. Choose a simple shower curtain or shower screen. The design should not be too cumbersome. It is good and harmless to keep the field of vision open.

 

The door should open outward to ensure that there is enough storage space inside. Cabinets and shelves of various shapes are arranged in an orderly manner on one wall. The mirror is cleverly designed on the cabinet door. The position of the hand basin is directly opposite the door. The width should be controlled within 38CM. The hook on the wash basin achieves the ultimate storage. The free space on the wall is also used to hang bathrobes.

 

Step3  Dig deep into multiple storage ideas.

To make a small white bathroom pleasing to the eye, the storage of items must be both beautiful and functional. In order to facilitate the use, the small bathroom storage adopts the principle of proximity. Around the basin and above the toilet can be used to store. The mobile storage can also meet the needs of use to the greatest extent; in order to ensure the beautiful design, you can choose the in wall or open shelf storage to make the space look fresh and orderly with simple black and white design.

 

The ladder-shaped storage shelf is the most stylish. If you want to change the form of storage, you can use a movable or foldable ladder shelf. The bearing capacity is strong enough. It can not only meet the storage requirements, but also increase the diversity of space. The toothbrush, shower gel, and towel are cleverly stored. At the same time, it has a petty bourgeoisie, which is not only beautiful, but also stretches the sense of space. It is easy to ventilate and does not grow bacteria.

 

The most classic form of storage in the bathroom is the in wall type. Use every corner. Turn the original unreasonable space into storage space. Generally the depth is about 15CM. If you exceed the depth, you can consider double-layer storage space. Make the space perfect from the perspective of decoration. Avoid water on the countertop. The countertop should be high inside and low outside when tiling.

 

Step4  Different materials and colors embellish the space.

The metal material brightens the space and adds fashion. The wood creates freshness and elegance. The softness in the space is embodied by cloth and fabric. The plants decorate the bathroom with a good mood. In the white bathroom, different materials and colors are mixed and matched, and the layers are opened to bring vitality. Different proportions form different flavors. A good space is diversified, and a harmonious combination can achieve the best results.

 

The combination of different materials in the space. The orange metal shower and the elegant white tiles strike a spark of design. The light-colored wooden boards on the wall of the dry area are extended to increase the visual level of the space. The wooden shelves and metal mirror cabinets in the storage area form an embellishment effect of the space. The carpet, which echoes the soft texture of face towels and bath towels, brings lively colors at the same time. The overall collocation is comfortable and relaxed.

 

Artistic tiles meet natural wood. Mix and match old elm wooden bowls and wooden stools in a simple and elegant space. There is almost no need to deliberately craft. The simple temperament is naturally formed. The metal faucet is mixed and matched with wood, which is very inspirational in design. The dark and light blue diamond-shaped ceramic tiles highlight the charm of the space. The white brick becomes the background to set off. The plants facing the sun are full of life.

 

Step5  Bathroom products enhance taste.

The bathtub and toilet are undoubtedly the leading role in the bathroom. But what can cleverly enhance the appearance of the bathroom are often overlooked small supporting roles, soap bottles, toothbrush cups, soap dishes, and daily cleaning and care products. The quality and taste of life are hidden in these details. Maximizing the appearance of bathroom items is also an important factor in improving the bathing experience.

This article introduces the three main components of the faucet. It will help you to understand the quality and material of faucets we use everyday. Uncover all the mysteries of the faucet.

 

Part 1: Composition

The three most basic components of a faucet: main body, plating and cartridge.

01 Main Body

The main body is the torso part of the faucet. The water flows in and out of the main body all the time. So the material is important. It determines the water quality.

 

Copper Alloy Faucet

Copper alloy is currently recognized as the most suitable main material for home use faucet, and the mainstream is brass. On the one hand, copper has good machinability, fluidity and formability. On the other hand, because copper ions have a bactericidal effect, they can kill super bacteria such as MRSA within 30 minutes and prevent the bacteria from producing antibodies. The inner wall of the copper faucet will not breed bacteria and become the most suitable carrier for "water".

 

According to different proportions of copper content in copper alloys, copper alloy materials can be divided into 52, 55, 59 and 62 copper. Among them, 59 copper is the best. The content of copper metal is 58%-60%, the content of lead metal is 0.08%-0.2%, and the content of other elements is about 2%. The remaining metal is basically zinc.

 

Because lead metal will precipitate when water enters the faucet, it will pollute the water. If the lead content is too high, it is harmful to the human body. Therefore, some brand faucets use low-lead copper, that is, the lead content is less than 0.1%. In view of the fact that it is difficult for general consumers to judge the lead content, it is recommended to choose a faucet with a clear mark that uses low-lead copper.

 

Zinc Alloy Faucet

Zinc alloy is an alloy based on zinc and added with other elements such as aluminum, copper, magnesium, cadmium, lead, and titanium. Zinc alloy is easily corroded in water. After being corroded, the metal will be mixed into the water and cause harm to the human body. The biggest advantage is probably the low price.

 

Stainless Steel Faucet

The main components of steel are iron and carbon. Ordinary carbon steel is easy to rust. Adding chromium, nickel and other metals to carbon steel can make the steel corrosion resistant. Therefore, the most important factor affecting the corrosion resistance of stainless steel is the content of chromium.

 

Stainless steel has the advantages of acid resistance, alkali resistance, corrosion resistance, and no release of harmful substances (lead). But compared with copper, it has one of the biggest drawbacks, that is, it does not have antibacterial function.

 

Brief Summary

If the budget is sufficient, choose low-lead copper faucets. If you can't identify whether it is low-lead copper, choose a product from a big brand.

If you have a small budget, you can choose stainless steel faucets. The price will be cheaper. However, relatively there will be some problems. In particular, we must choose products from high standard manufacturers. After all, it's about your own health, don't be greedy for cheap.

 

 

02 Plating

The faucet is used in a humid environment, and its surface requires a good finish. The common surface treatment method on the market is electroplating, mainly including chrome plating, nickel plating, titanium plating and so on. In addition, there are some rarer methods such as baking varnish, porcelain, and imitation gold electrophoretic paint.

 

Chrome

Chrome plating is the most common faucet plating. Chromium is a white metal with a bluish color, which has high hardness and wear resistance. Its hardness exceeds even the hardest quenched steel, second only to diamond.

Chromium is not easy to change in a humid environment and can maintain the surface gloss for a long time. With a silver appearance, chrome-plated faucets are more popular with consumers.

 

Nickel

Nickel can quickly form a very thin passivation film on the surface of the faucet. Can resist the corrosion of water vapor and certain acids. Has excellent corrosion resistance and stability. Can resist the corrosion of water vapor and certain acids. Therefore, the stability of the nickel layer in a humid environment is very high.

Titanium Alloy

Titanium alloys are made by adding aluminum and tin elements or aluminum and vanadium elements to titanium. Electroplated titanium gold has the advantages of high strength, low density, strong toughness and good corrosion resistance. The surface of the titanium-plated faucet is as smooth as a mirror. Its golden luster looks elegant and rich, and very decorative. However, the process of plating titanium gold is complicated. It is very easy to absorb impurities during thermal processing. Therefore, the yield is low. The cost is also higher.

 

Baking Varnish

Baking varnish is to put two layers of coating on the faucet. Each time the paint is applied, it is sent to a dust-free constant temperature baking paint room for electric heating or far-infrared high temperature baking.

The surface of the baking varnish faucet is smooth and shiny, which can present a visual texture similar to that of a piano, making the whole product look very high-grade. However, compared with other surface treatment methods, baking varnish faucets are more prone to surface peeling. The durability is not as good as the traditional chrome-plated faucet. This method is not widely used.

 

Brushed

This treatment will make the surface of the faucet visually rough. However, it is quite delicate to the touch, showing a restrained beauty. The brushed process mainly relies on mechanical friction to produce several common textures such as straight lines, chaotic lines, threads, corrugations, swirling lines and intermittent silk lines on the surface of the faucet. It can also create matte, mirror, three-dimensional, embossed, satin and other effects.

 

Brief Summary

Appropriate surface treatment can make the overall shape of the faucet rich and full. Choosing the right faucet can also become the finishing touch to the bathroom decoration. It is pleasing to the eye.

There are generally multiple layers of plating. There are also some cheap faucets that are only coated one layer. The coating is not as thick as possible, but just right. If the coating is too thin, it will not be able to prevent corrosion. If the coating is too thick, it is easy to peel off. Copper + nickel + chromium is best. Copper can provide excellent adhesion. Nickel makes the coating have excellent corrosion resistance. Chromium makes the surface bright and flawless, and it is hard and scratch-resistant. Further improving the corrosion resistance. In addition, the faucet that has passed the 48-hour professional salt spray test will be more guaranteed in terms of corrosion resistance. Aquacubic's products have passed these tests.

 

03 Cartridge

The cartridge is a part that realizes the basic functions of direction control, pressure control or flow control by means of the rotation of the valve stem. The water flow enters the main body of the faucet through the cartridge and finally leaves the water outlet. The faucet used at home is turned on and off countless times a day. It can be seen that the quality of the cartridge is also very important to the faucet.

Ceramic Cartridge

The ceramic cartridge has less water pollution, good wear resistance and good sealing performance. Many high-quality faucets use ceramic cartridges. The ceramic chip must have good airtightness, stable physical properties, wear resistance, and long service life.

 

Stainless Steel Cartridge

The biggest advantage of the stainless steel cartridge is that it has a larger adjustable angle of rotation and is not easily affected by water quality. It is more practical to choose this type in areas with poor water quality. However, stainless steel has worse wear resistance compared to ceramic. After it is used for a long time, water leakage is prone to occur.

 

Roller Cartridge

Roller cartridges are old-fashioned cartridges. No matter in terms of price, water pollution or life span, they are inferior to ceramics and have been phased out. There are very few roller cartridge faucets on the market.

 

Part 2: How to Buy ?

After understanding the most important parts of the faucet, let's take a look at the precautions when purchasing.

 

01 The Weight

Faucets made of brass are heavier. So you can make a preliminary judgment by weighing the faucet. However, many manufacturers can increase the weight of low-quality faucets through some methods. So here is a commonplace saying, for consumers who can't distinguish the material, it is better to choose the leading brands. This is the simplest selection method.

02 The Surface

In sufficient light, carefully observe the electroplated surface of the faucet. Good electroplating looks as bright as a mirror, without any oxidation spots and burn marks, no pores, no blistering, no plating leakage, no burrs to the touch. After pressing the faucet, the fingerprints will spread out quickly, and it is not easy to adhere to dirt.

 

Breathing out the surface of the faucet. For products with good electroplating quality, the water vapor will quickly and evenly fade away. If the quality is not good, the fading speed will be slower, or not fade. The faster and more even the water vapor fades, the better the quality.

03 After-sales Service

The after-sales service of the product is very important, and it is also the guarantee for you to have no worries. Be sure to buy products with good after-sales service. The general faucet is guaranteed for at least 5 years.

 

When choosing a faucet, the most important thing is to look at the material, plating and cartridge of the faucet. Because the material determines the safety of the water. The coating can increase the service life of the faucet, so that the faucet has scratch resistance, corrosion resistance, and the surface brightness will be better. The cartridge is the heart of the faucet. Generally high quality faucets use ceramic cartridges. It has the characteristics of strong wear resistance and good sealing performance.

Don't think that after the new house is renovated, it will be as pleasing as the propaganda album. After the new house is renovated, a large amount of decoration waste will be generated. Dust, stains and marks from the decoration will be left on the walls and glass. Just like a baby who was just born, she will have a cute appearance after washing and putting on clean clothes.

Cleaning the newly renovated new home is an important task after decorating the new home. It is also the most laborious task. Facing a messy and unstructured new home, you don’t know where to start. Summarize the first cleaning experience after the renovation. We hope it will be of reference significance to you.

01 Cleaning Service

Those who are clueless about the cleaning of a new house can choose the cleaning service of a housekeeping company. Housekeeping companies have their own routines and tools for cleaning work. It is also a way to hand over professional cleaning work to them. The premise is to choose a qualified and high-quality housekeeping company. Services include: house dust removal, cleaning up decoration garbage, wiping glass, cleaning the floor, decontamination and disinfection of kitchen and toilet, cleaning up decoration traces, etc.

 

Notes on cleaning service

1. Organize a list of cleaning precautions, and list some areas that need special cleaning to avoid omissions. The decoration materials of each family are different. It is necessary to tell them some precautions, such as which places and areas cannot use water or chemical cleaners. These need to be communicated clearly with the housekeeping company before starting work.

2. Clearly state the materials of walls, floors, furniture, etc. that need to be cleaned, and let the staff prepare appropriate cleaning tools.

3. Communicate clearly about the tools needed for cleaning, which are brought by the staff and which are prepared by us.

4. Communicate clearly on the disposal method of the cleaned up waste, whether to throw it away or keep it somewhere.

5. Supervision, including whether to do a good job in dust prevention and cleaning of dead ends.

 

02 Clean Up by Yourself

Some people are unwilling to hand over their new homes to strangers to clean up, so they do their own cleaning work. Cleaning in person is nothing more than two things: preparing tools and clarifying the order of cleaning.

 

Preparation of Tools:

1. These will be used to clean the wall.

Small brush, sandpaper (to polish the paint on the wall), shovel, glass spatula, wet paper towel (to wipe the wallpaper), ladder.

2. These will be used to clean the ground.

Vacuum cleaner, mop, broom, nano sponge, rag (use a discarded old bed sheet; the size can be cut at will. It is big enough), dust cover, garbage bag.

3. Protective Equipment

Shoe covers, gloves, aprons, masks.

4. Cleaning Utensils

Detergents, maintenance agents, disinfectants, glue removers.

 

Cleaning Order: 

Cleaning follows the order from top to bottom and from the inside to the outside. 

Start cleaning from the room first, and then go to the kitchen and living room. The bathroom can be placed last, because the bathroom is a place where water is used repeatedly during the cleaning process.

Like kitchens and bathrooms, where there are wall tiles, they need to be cleaned from top to bottom to clean up the gaps in the tiles and the paint spots and glue stains on the surface.

 

03 Cleaning Techniques

During the decoration process, many traces of material adhesion will be left, and some cleaning skills are required.

Tape print: Use a damp cloth to wet it for a while before wiping.

Paint traces: Use paint remover or turpentine.

Marker marks: Wipe with a rag or damp paper towel with some alcohol.

Tile stains: Use special detergent for tiles to clean, paint and drawing pen fluid can be cleaned with turpentine, pyruvic acid or alkali.

Cement on glass: If it is a small cement stain, wipe it with a damp cloth and then scrape it off with a spatula. If it is a stubborn and large cement block, you can use the toilet cleaner to remove it. The effect is very good.

 

Tips: The toilet cleaner is acidic. Wear gloves when using it and don't think that the toilet cleaner is effective in removing cement and use it on tiles and marble floors. In addition, do not use alkaline soap at the same time when removing the cement on the glass.

 

04 Cleaning Can Be Done Separately.

In fact, if the new house cleaning work is done step by step during the renovation process, the subsequent cleaning will not be so laborious. Separate the cleaning work to these renovation steps:

 

1. After the water supply line and electricity are completed, and the walls and ground are leveled, the whole house can be cleaned and clean up the discarded decoration garbage.

2. When laying tiles, remind the workers to wipe off the cement stains on the surface of the tiles after laying the tiles.

3. After painting the wall and floor, you can clean it again.

 

If you have other new house cleaning experience, please leave a message to share with us.

Sanitary ware is a must-have for household life. With the improvement of people's living standards, the market has been expanding. And after years of development, China's sanitary ware output has become the world's largest.

Competition in the low-end market is fierce. And difficult to enter the high-end market.

In recent years, China's sanitary ware market has been in a state of rapid development.

However, most sanitary ware companies have not been able to keep up with the pace of development, and management and marketing have not been standardized. The quality of employees is not high. Only a few companies have operated some well-known brands and opened up channels. This leads to vicious competition between enterprises and the market is occupied by a very small number of large and well-known enterprises.

 

The disadvantages of small sanitary ware companies are even more obvious: small scale, single product, outdated equipment... seriously lacking in competitiveness.

And several large foreign brands not only control the high-end market, but also become more and more competitive in price. They are gradually penetrating into the low-end market, which is an unprecedented test for small and medium sanitary ware companies.

 

Secondly, various costs such as materials and labor are rising. The rising cost puts more and more pressure on sanitary ware companies. In the face of many competitors, they have to increase advertising investment. By compressing their own profit margins, try to gain customers and open up sales.

For sanitary ware companies, especially small and medium-sized enterprises, it is tantamount to worsening the situation.

Some people say that the Chinese sanitary ware market is "handed over" by the Chinese themselves.

Only by occupying the high-end market, the enterprises can have a position; on the contrary, the smaller the share, the lower the position.

 

It is understood that China has become the world's largest bathroom consumer market. The performance and quality of many domestic sanitary ware brands have reached or even surpassed that of foreign brands. However, foreign sanitary ware brands have almost monopolized China's high-end sanitary ware market with their strong financial strength and high brand awareness.

In addition to historical reasons, the lack of brand awareness of domestic companies is an important reason for this situation.

Sanitary ware has been continuously developed and improved. More and more consumers not only pay attention to product price, quality, and after-sales service when buying sanitary products, but also pay attention to brand awareness and business reputation.

 

If the company still stays in the business philosophy of the seller's market in the past, it will definitely be at a disadvantage in market competition, and even be ruthlessly eliminated by the market. The sanitary ware industry has entered the era of brand marketing.

 

Liberate the shackles and keep up with the times

According to statistics, China's annual demand for ceramic sanitary products has reached 34 million pieces. It has become the world's largest consumer market for sanitary products. Last year, the output of ceramic tiles and sanitary ware products reached 7.5 billion square meters and 177 million pieces respectively. They account for 60% and more than 40% of the world's total output of architectural sanitary ceramics. The annual growth rate of products exported to Europe, the United States, Japan, South Korea, the Middle East and other places is 50%.

From the analysis of this trend, the Chinese sanitary ware market is quite optimistic. With a large amount of rigid demand, it can be said that the market is very good.

 

However, due to the comprehensive factors such as rising raw material prices, rising labor costs, and continuous floods and droughts this year, the domestic ceramic industry is in a downturn.

In response to the frequent occurrence of "overcapacity" and "market saturation" in the industry, the profit margins of small and medium-sized bathroom companies will be further compressed. More and more rational consumers do not intend to pay for it. The pressure of product backlog is considerable, and some Chinese factories have to stop running some production lines.

 

The ceramic sanitary ware industry is still very traditional in terms of management and marketing. Employees lack technical expertise. Therefore, only a very small number of companies have relatively well-known brands and relatively complete sales channels.

Many companies' own sales channels and sales management are obviously not standardized enough, and marketing is weak. The sales of products depend on a good relationship with distributors.

 

In addition, many companies do not have the ability to operate brands, a systematic business model and a professional marketing team; no accurate market information; no customer-oriented service standards and customer-oriented service system; no market-oriented research and development, production, and supply system. The capital investment cycle is long and the risk is high. All of these will become a time bomb that puts enterprises at high risk, and may be deadly at any time.

In summary, it is not difficult to see that an enterprise's internal operation management system urgently needs to be established, and market standards urgently need to be standardized. In addition, companies can stop running part of the production line, digest inventory, and wait for the peak sales season. Because there is real rigid demand, as long as the product is done well, no matter how the market environment changes, a certain effect will eventually be achieved.

 

The following are three suggestions for improving the status.

 

Keep Up with Quality

At any time, the quality is everything and will not lag behind. Consumers who spend money on goods, especially a household product, will certainly not tolerate quality problems. Update production equipment and other infrastructure. Although the cost is high, if you don't invest, it's just waiting to die.

 

Sales Channel Expansion

In the past, the marketing of sanitary ware companies relied on good customer relationships to a large extent. Lacking the ability to operate the brand; there is no standard customer service system and professional marketing team. These all increase the profit risk of sanitary ware companies invisibly. This is also an important reason why many sanitary ware companies say that "the product is good, but it can't be sold."

 

Keep Up with Service

Compared with methods such as updating equipment and adding stores, the investment in service quality improvement is much lower than the previous two. Moreover, there are more and more high-quality sanitary products in China. Whether to develop high-quality, considerate and personalized services to bring customers a better service experience has become most important for the product to stand out.

Loading... Single Handle Pull down Spring Sprayer Kitchen Sink Faucet Manufacturers Item Number OB-T07 Warranty OUBAO Offers 5 years of warranty on all purchased faucets. Color Customize and Quality Assurance OUBAO offers more than 20 color options with 7 layers of high quality electroplating process. Shower Spray Mode

Type: Kitchen pot filler faucet Style: Dual Holder Single Hole wall mount Material: 100% Brass Installation Type: Wall Mount Number of Handles: Dual handles Inlet Connection Size: Standard 1/2" Female NPT with Wall Flange Flow Rate: 2.2 gpm @ 60 psi Water Supply: Only Cold Water or Only Hot Water Total Length: 24" Product Feature:

Pfister Brea 2-Handle 8" Widespread Bathroom Faucet - Brushed Nickel (20)

Sonoma Forge | Bathroom Faucet | Strap | Deck Mount | Hands Free

Reginox Reversible Ceramic Kitchen Sink

73-THM2522BK Single topmount black stainless steel kitchen sink with grid 25" x 22" Be the first to review this product

Bridge Stainless Steel Kitchen Faucets for sale | eBay Bridge Stainless Steel Kitchen Faucets Best Selling Kohler R21070-SD-VS Kitchen Faucet (3)

Neo Modern Basin Mono Model No.: FFAS0706-151500BA0 Where to Buy Features