











The sink must be installed in the bathroom? Take a look at these locations that may be more suitable for sinks in your new home!
As a patient with lazy cancer, where to put the sink determines how many steps I have to take to wash my hands. Do I have to go to the bathroom after eating snacks and watching a drama at night, and getting up to wash my hands? Can't the sink be placed at the door? Put it under my nose? Or even in the balcony close to me? The answer is yes.
01. Where should the sink be moved out of the bathroom?
In order to make it easier for you to use, we will give you a few common places to put the sink. It can be installed in the hallway. There may be few people who think of this, but it is very common in Japan. As long as space permits, they will find a way to add a sink near the hallway so that they can wash their hands as soon as they enter the house. In addition, the sink can also be used as a partition of the entrance, so that even the entrance hall is made.
Put the sink on the aisle at the entrance of the bathroom. In this way, the dry and wet separations can be easily realized. Because the washbasin only occupies a small area, the total space will not become small.
If you are worried that the total appearance will be affected by putting it outside, and later storage can not be done well and it is messy, you can directly weaken it visually during the renovation by adding a wall to enclose it.
Wooden fences or glass can also be used as partitions, and cabinets can be used for storage on top.
The glass partition can prevent water from splashing everywhere when washing hands, and keep the space visually transparent.
If there is a gap between two rooms, you may consider putting the sink here. Such as between two bedrooms, between the kitchen and the bathroom, etc.
The advantage of this is that it can make full use of the space and avoid the waste of repeated settings. At the same time, it can also have the function of dividing space. It can also be installed on the balcony. Modern people spend most of their time in the living room. If you put the sink on the balcony closest to the living room, because there is plenty of light and the view is open, will you feel better when you wash your hands?
We can also put the washing machine next to it, throw the clothes in and wash them.
It is relatively rare to install on the dressing table. A dressing table can be placed in the bedroom to store all kinds of small things, and it can be combined with the sink. Sinks can be installed in the bathroom, outside the bathroom, or between the cloakroom and the bathroom.
According to our thoughts, these may seem strange, but starting from the owner’s living habits, it seems to be a reasonable design. Tip: The disadvantage of placing the sink outside the bathroom is the laying of water and sewage and waterproofing. Need to discuss with construction workers in advance and implement as required. Waterproofing should also be done well. It is recommended to follow the waterproof standard of the dry area of the bathroom, and apply waterproof paint at least 30cm high on the wall near the sink and on the floor. Secondly, there is no door to block the washbasin outside. If the storage is not done properly, the messy scene will be directly exposed. Therefore, the corresponding storage function must be done well, and the choice of towels even become stricter. Otherwise sit in the living room and see a messy washing area.
02. An easy-to-use sink can be like this.
In addition to moving the washbasin, its appearance and comfort should also keep up. You need to know the following knowledge. The style of the washbasin: Above counter basin and under counter basin. Above counter basin has a super good looking. In addition to square, round, oval, there may be other petal shapes to choose from. Generally they can be matched with high body faucets.
The under-counter basin is installed under the countertop and glued to the countertop from bottom to top. The advantage is that it is very convenient to clean the countertop. It is very common to have water on the countertop, you can easily wipe the water into the basin. It is more convenient to have a mirror cabinet, and the storage capacity can be improved a lot. Some mirror cabinets are fully enclosed, and some are partially open for storage. What kind of mirror cabinet to choose depends on your living habits.
Lighting Design.
Light is a top requirement for looking in a mirror. Most people may only install a mirror headlight above the mirror. In fact, the best way is to set up lights on the left and right sides of the mirror, which is about one person wide. Many professional dressing tables are set up in this way.
Double Basin Design
The double basin design can improve life efficiency. For example, a family of four has to go to school and work at the same time. And two people washing together is also very warm. Of course, double basins may only be suitable for large bathroom space.
Basin Style
It can be a basin or not. An artistic design. For example, in a retro-style home, try a bicycle wash basin.
There are also a few stacked stones. Is there a trace of natural "spring" style when the water runs out from the stone?
If you like minimalist style, consider this transparent glass wash basin.
If you want to realize the separation of dry and wet, but in the small area of the bathroom it cannot be realized, the above method can be considered. It is indeed completely reasonable and feasible to move the sink out.
The home is inseparable from the support of basic hardware. Don't underestimate the basic hardware. Their technological content and technical barriers are higher than you can imagine.
Of course, the difference in quality and price is even more surprising.
Basic hardware generally includes: hinges, damper, sliding rails, etc. Put it simple, all the hardware components that enable the cabinet and the pull basket to achieve the functions of opening, sliding, and staying.
Hinges
The most used is the hinge. It not only needs to connect the cabinet body and the door panel accurately, but also bear the weight of the door panel alone. And all doors must be kept neatly arranged. Otherwise, it may loosen and fall after a period of time.
Sliding Rails
In the design of the entire drawer, the most important accessory is the sliding rail. Due to the special environment of the kitchen, even if the low-quality sliding rail feels good in the short term, it will be difficult to push and pull after a longer time.
Damper
The damper is matched with the sliding rail and the hinge. The damper has two most important functions. One is to improve the precision of the hardware, and the other is shock absorption.
Flip up Door Support: First of all, it is sturdy and has no shaking, the surface is smooth and the workmanship is fine. And it is smooth and quiet in use.
In addition, damper and rebound depend on whether the force is uniform, and if there is no load, test whether it can be smooth and quiet under load, and whether there is obvious friction and jamming.
Considering the frequency of use, be sure to choose a big brand. The good ones can last for decades, and the poor ones will have quality problems in three to five years.
Now we will introduce the international brands of kitchen hardware products and their characteristics.
GRASS of Austria is one of the largest hardware vendors in the world, focusing on the development of furniture hardware, just like their slogan: Let the opening and closing of furniture become the most comfortable experience.
Their products are mainly comfortable to use. The best product is the sliding rail system. Others include hinges and upturn supports.
Salice of Italy is a veritable king of hinges, and the world's first modern furniture hinge was made by them.
In the European high-end furniture market, it is in a "monopoly" position. The top cabinets in Germany and Italy almost all use Salice's hinges.
Expensive and good.
No need OEM service from other factories. 100% of the spare parts are all from Europe. Surface treatment and rich colors are also a major feature.
Hettich in Germany is like a furniture hardware store, with a multi-faceted product line, which is still a little different from the two above.
Many people think of them as expensive, solid materials and excellent performance.
Then there is Blum in Austria, which is more like a cabinet hardware store. The main product is hinges, which is still far from Salice. Most professional cabinet brands use Blum's hinges. Blum is the most well-known hinge company in China.
Finally, let us talk about the German KESSEBOHMER, which is smaller than the above ones. It focuses on the cabinet hardware. The design and craftsmanship are excellent. The selection of materials is strict and the workmanship is fine.
And there also is Hafele. Hafele is almost like an international distribution center for hardware accessories. The product line is rich, covering construction, furniture, cabinets and other fields. Most products are from global procurement and OEM factory. Hafele can be called Carrefour in the hardware industry.
The ranking of domestic hardware brands has changed considerably. The more famous ones are DTC and HIGOLD.
DTC mainly has a large output. The domestic output in China is the first. It is also among the best in the world. The main products are connectors, hinges and slide rails.
HIGOLD, the latecomer, takes the lead. Focusing on functional hardware. Product advantages are function and design.
Although the bathroom is small, it is a very important part of the decoration and is closely related to our lives. Everyday life starts here and ends here; if the decoration is not good, it can drive you crazy every day. The toilet is broken, the shower is blocked, and so on.
In the process of using the bathroom, some problems are always prone to occur. Therefore, when decorating the bathroom, it is necessary to control all aspects of the details in order to avoid the impact of daily life as much as possible.
Four Matters Needing Attention in Bathroom Decoration
1. Spare more power sockets and water outlets
Many people often forget to spare more power sockets and waterways during bathroom decoration. Changing smart toilets and heated towel rails in the later period will easily cause inconvenience.
2. The problem of wall and floor tiles
Before laying the floor tiles, do a water leakage experiment for at least 24 hours. Go downstairs to see if there are any signs of water leakage. The floor tiles are aligned with the wall tiles. When laying the floor tiles, ensure that the brick surface has a slope of about 1°towards the floor drain.
3. Separate dry and wet spaces
If the bathroom does not separate from wet and dry, it is easy to cause the water in the shower to splash everywhere. Easy to slip and fall. It is not conducive to cleaning and can not keep the bathroom dry.
4. The problem of replacing ordinary toilets with smart toilets.
When installing an ordinary toilet, users generally did not consider the subsequent transformation of the water circuit, and did not spare a strong electric power supply, socket and water circuit in the toilet position. It will be more difficult to use a smart toilet in the future. The pit distance should also be considered when installing the toilet.
Six FAQ about Bathroom Decoration
1. Which is more practical, shower room or bathtub?
In general, the shower room should be more practical than the bathtub. The shower is timely, convenient and practical, and relatively hygienic. For ordinary families, many people use it only once a year after the bathtub is installed. Most of them are used to soak clothes and curtains.
2. Is the shower curtain easy to use?
For small apartments, the area of the bathroom is relatively small. Glass partitions can make the already small bathroom appear more crowded. If the shower curtain is used as a partition, the entire space becomes much more spacious after unfolding. The shower curtain can also realize the function of separating dry and wet, preventing water from splashing out of the shower.
3. Choose mosaic for bathroom decoration, or is pure black and white more practical?
Mosaic decoration effect is good, but the material price and labor cost are more expensive. If you want to install a towel bar or shelf where the mosaic is used, you can only choose to use the expansion screw method, and it is more difficult to use the suction cup type. Mosaic is not easy to take care of, and it is easy to hide dirt. So try to use it in dry areas.
4. How to choose above counter basin and under counter basin?
The above counter basins have many shapes, large choices and ideal decoration effects. The installation is simple and convenient, and the maintenance is convenient in the future. If it breaks, remove the glue and pick it up directly from the countertop to repair it. However, when using the above counter basin, the water is easy to splash outside. You have to wipe the countertop after washing your face. The key is that there are dead spots that are difficult to wipe. For people who do not have a laundry balcony and like to wash their clothes by hand, it is recommended to choose a larger and deeper basin. Washing your face is the next thing, and you have to have a place to wash your clothes.
The under-counter basin is embedded in the middle of the countertop, which is more beautiful than the above-counter basin, and the basin surface is lower than the countertop. Water on the countertop can be easily poured or wiped into the basin, which makes it more hygienic.
5. How to install floor drain and socket ?
The location of the floor drain needs to be carefully considered, preferably on one side of the floor. If it is in the middle of the bathroom, the floor drain will not be the lowest point no matter how the tiles are inclined. Setting up well the location of the floor drain can avoid the problem of water accumulation.
The socket should be designed with a switch, especially the socket of the electric water heater should be equipped with a switch. You also need to spare a few more next to the sink to charge the common appliances such as hair dryers, razors, and electric toothbrushes. Electricity safety has never been a small issue, so special attention must be paid!
6. Why install the bathroom exhaust fan ?
The bathroom at home is relatively humid, which can easily breed bacteria, which affects our health. So everyone will install an exhaust fan in the bathroom, which solves the problem of damp space and keeps the bathroom fresh air at the same time.
Ceramic sink is a kind of household goods. There are many kinds of sink materials, such as cast iron enamel, ceramics,
steel plate enamel, artificial stone, acrylic, crystal stone flume, etc. Most bathroom sinks are made from firecaly.
Ceramic sink is a kind of water sink which is made by integrated molding and firing. Its main body is mainly white.
It has the advantages of high temperature resistance, easy cleaning and aging resistance.
It can be wiped clean with cloth or clean metal ball in daily cleaning.
Step Ⅰ. Grouting
The production of ceramic sink is generally made by grouting.
The slurry is poured into a fixed die and allowed to solidify.
Step Ⅱ. Spraying Glaze
It is necessary to prepare qualified glaze slurry. Spray it on the surface of sink body.
Vitrify it into porcelain after firing; cover it on the surface.
Step Ⅲ. Forming
Forming is a drying process.
The process of further dehydration of semi-finished products.
Step Ⅳ. Preparation for Furnace
This is an important step before burning.
Workers need to check the surface & quality of the sinks and lay them together in trolley.
Step Ⅴ. Burning
Put the products on the kiln car according to certain proportion.
Based on the given temperature curve, sink will form finally.
Step Ⅵ. Storage & Logistic
With the development of storage & logistics industry,
we developed a complete solution for big size cargos.
The bathroom area is small, but it needs to be equipped with sinks, cabinets, washing machines, showers and toilets. There is a new way by changing the water route in advance to move the basin outside the bathroom!
Simplify the Bathroom
If you want the washbasin to be outside the bathroom, the most feasible way is to move the door of the bathroom inward to ensure the privacy of the toilet and bathing area.
This approach is actually the traditional "dry-wet separation".
But the difference is that the original washroom door does not need to be installed, and the basin area and the outer area are more integrated.
A sliding door can be installed between the toilet & the shower area and basin, or a specially customized water resistant door. The floor tiles at the basin area can be designed as a unified design with the outside of the bathroom.
The laundry area and the basin are integrated on the outside, because it is not afraid of moisture, the towel basket does not need to be stuffed in the cabinet.
The overall space has not become more crowded by adding walls. Entering the door, the bathtub and shower head are immediately visible and easy to use.
Generally, ultra-thin lightweight partition walls are used, and waterproof coatings are also applied, so there is no need to worry about the partition walls being too thick or not moisture-proof.
Move the basin outside the door
The size and layout of the bathroom are not satisfactory, so let the washbasin truly stand outside the bathroom door!
Where should I install the basin outside the bathroom door?
First of all, it is recommended to be as close as possible to the original sink drain pipe, which is convenient for construction and saves labor and money.
Secondly, consider the habit of daily use of basins. For example, every morning, if you and your family can't wash and go to the toilet at the same time, put the basin near the bedroom.
You can brush your teeth and wash your face when you get up in the morning and go out.
If there is a corridor end or a concave wall near the toilet, it is most suitable to install the sink cabinet.
But it doesn't matter if there is no concave wall, self-built partitions are equally beautiful.
The lockers for bathing products can be placed above the basin together. In this way, the remodeled bathroom will be more refreshing and easy to take care of.
The wash basin can be placed on the balcony.
The wash basin is placed on the balcony because it does not occupy the kitchen and bathroom space, and it is convenient to dry the towels after washing.
Now that the water pipe has been connected to the balcony, you can also plan a good-looking basin. In addition to washing, water for watering flowers and boiling water can be obtained here.
For a family with one bathroom but three generations living together, one more basin can reduce a lot of inconvenience in life.
Make a simple-style balcony hand-washing area. It’s more convenient to wash your hands and fruits now.
Wash basins can be hung on the wall.
The washbasin can also be hung on the wall to play its function, but it will involve all kinds of wall drilling. And it can’t be moved after it’s built, so consider carefully before decorating it.
The best place to put a basin in the bedroom.
The cosmetic storage cabinet can be installed under the basin. Daily skin care, makeup, and makeup removal can be done easily.
If the toilet is close to the hallway, install a basin beside the hallway to enrich the functions of the hallway.
The dining room can also be equipped with an independent basin, and the water pipe can be taken from the kitchen at the beginning of the decoration.
Installing the basin outside the bathroom, in addition to being practical and convenient, can also match the overall style of the home. The washbasin can be integrated into the design of the cabinet, and the surrounding waterproof treatment should be done.
The bathroom is the wettest place in the house, and it is easy to breed bacteria if it is not properly cleaned. Next, learn these tips to make the bathroom as clean as new!
Clean the Faucet
Does the water stain on the faucet look dirty? Water stain can be removed with one trick! Mix the white vinegar and baking soda powder evenly, put the toilet paper in and soak it completely, then cover the faucet for 30 to 60 minutes, uncover it and rinse with water.
Cleaning the Shower Head
If the shower head is used for a long time, there will be a layer of scale on the surface, which looks dirty, and even more serious it will block the water outlet! You can take a plastic bag, pour white vinegar, wrap the shower head and fix it with a rubber band, soak it for 1 hour and then dry it with a dry towel. The shower head will be as clean as new. A clean shower head is much more comfortable to use!
Cleaning the Toilet
1. For yellow stains that are difficult to remove in the toilet, you can sprinkle with baking soda and soak in hot water for half an hour before washing. Remember to cover the water outlet on the inner edge of the toilet with toilet paper soaked in baking soda solution to achieve the purpose of soaking. The same goes for squatting toilets!
2. If conditions permit, you can remove the toilet lid and clean the gap.
3. Add some white vinegar to the water tank, which not only has the effect of disinfection and sterilization, but also removes the scale attached to the inner wall of the water tank.
Cleaning Bathroom Tiles
The joints of toilet tiles can easily turn yellow and black. Dip and use a toothbrush with washing powder, toothpaste or baking soda can effectively brush off stains. Remember to clean up water stains every time you use the bathroom!
Cleaning the Exhaust Fan
Exhaust fans can help keep the toilet dry, but because of the inconvenience of cleaning, it is often overlooked by us and becomes a place to hide dirt!
1. Remove the fan cover, soak it in soapy water and wash it, and then dry it.
2. Soak the rag in soapy water, wring it out, and carefully scrub the fan blades and vents. Finally wipe it with a dry towel.
3. Install the dried fan cover as it is.
Cleaning the Mirror
Bathroom mirrors are often stained with toothpaste, water stains and other things. At this time, you might as well use the leftover black tea bag to gently wipe the spots on the mirror, and then wipe it with a dry cloth to restore it to new.
Clean Rust Stains
The bathroom is damp. In case the metal utensils rust, you can cut the lemon in half, squeeze the lemon juice on the rust stains, soak for 10 minutes, brush off with a brush, and finally clean it with clean water.
There are many bottles and cans in the bathroom. You can apply a layer of nail polish on the bottom of the rust-prone material in advance to prevent rust.
For a more useful and faster-drying bathroom, toilet, shower, and washbasin must be separated.
The toilet, washbasin, and shower located in three areas allows people to use them separately.
This design has more advantages.
1. Dry area always being dry.
Using a three-separated bathroom, when the shower is completely independent, the sink and toilet area will not be affected by the shower. Cleaning is also more convenient.
2. More people can use the bathroom at the same time.
In the morning some want to use the toilet and some want to brush their teeth. If there is no separation, as long as one person enters, the whole family will have to wait.
However, with the three-separated bathroom, everyone can save time and use separately.
Three-separated Bathroom Layout
If the bathroom is a long and narrow shape, it is recommended that the toilet, washbasin, and shower are arranged in a row.
Usually the most frequently used washbasin will be placed in the middle, so you can come in and use it at any time. To the left and right are the shower area and toilet.
The toilet and the shower area can also be arranged on the same side, and the washbasin is placed on the opposite side to form a T-shaped arrangement. Hotels often use this layout, which is relatively confidential, but does not waste space.
If you want to add a bathtub, because the bathtub is used less frequently, it is usually placed in the corner next to the washbasin.
But to be honest, the three-separated bathroom requires a relatively large area. The partition wall will be added, and the distance between the shower, toilet and washbasin will be increased. If three separations are used, it is bound to reduce the size of other spaces.
Design and Construction Considerations
1. The minimum shower area wide is 90cm.
The shower area should be kept wide enough for the person to turn around, and hands should not touch the wall easily when showering. It is convenient to have a width of at least 90 cm.
2. The toilet area is at least 70cm wide.
If you don't want it too narrow when going to the toilet, the wall should not be too close. Starting from the center of the toilet, leave a width of 35 cm or more to the left and right to make it easy to use.
The human action is to turn around and sit down on the toilet, so 60 cm of moving space is required in front of the toilet.
3. If the toilet is adjacent to the shower area, the water pipe is easy to install.
When the toilet and the shower area are adjacent to each other back to back, the pipeline can be hidden in the partition between the two, and the distance of the pipeline can be shortened.
4. There is no need to install a floor drain in the toilet and washing area.
Since the three-separated bathroom has completely separated the toilet, washbasin and shower, and now fewer people will flush the floor. Therefore, it is only necessary to install a floor drain in the shower room. Blocking with waterproof strips can ensure that the toilet and washbasin area remain dry. For floor cleaning in dry areas, it is recommended to wipe with a mop.
5. Reduce the area of waterproof coating.
Ordinary bathrooms are usually recommended to do waterproof layer on the walls and floors of the whole room due to the spread of moisture. However, in the three-separated bathroom, there will be no excess water vapor in the toilet and washbasin area. It is recommended to do waterproof only half-height walls.
Then we take a look at the examples of the three-separation bathroom.
U-shaped Layout
This is a typical hotel bathroom layout. The sink is in the center, and the toilet, shower area, and bathtub are placed on both sides, forming a U-shaped layout. Suitable for use in large-area bathrooms.
The doors of the shower room and toilet area are designed with metal mesh, which is ventilated and can be cleverly hidden.
The walls and floors of the whole room are paved with the same marble. With metal accessories, the overall style is particularly high-end.
One-line Layout
With the double washbasin design, two people wash at the same time without being crowded. With double-sided mirrors and wall lights on both sides, it forms a balanced and symmetrical design.
The retro tile floor, the decorative pillars on both sides of the countertop, the delicate and elegant chandeliers, the natural and romantic simple European style.
Off-white is selected as the main color of the space, matched with earth-colored walls. The calm atmosphere makes the bathing space more comfortable and relaxing.
If you don't make a door, just use cement partition to separate the shower area or toilet, which can reduce the visual barrier.
A sliding door is used between the shower area and the bathtub, which can be ventilated at any time and can achieve the effect of privacy.
Two-line Layout
The washbasin area is in a single row. Since it is isolated from the shower area, it is relatively dry. The dressing storage is also set together, making it easier to use.
The wash area is in line with the toilet area. The bathtub is next to the shower area. Effectively separate the dry and wet areas. At the same time, hooks are installed on the wall for the towels and bathrobes.
If the bathroom does not have a window, you may wish to use colors and lights to brighten it up. The orange half-wall design makes the space bright and vibrant. Place some flowers and plants to make it more vibrant.
The wall is made of cement gray, so even if water drops splash off, it will not leave a trace. The mirror cabinet on the top can effectively increase the storage capacity.
In order to leave the central aisle, move the sink outside. Arranging the shower area and the toilet back to back not only effectively shortens the length of the water pipe, but also makes the design more concise.
In a typical T-shaped layout, the shower area and toilet are hidden behind the washbasin to maintain privacy. The wash area divides the bathroom into two parts.
The entrance of the bathroom is designed with arches, and the retro red bricks are more antique. The tiled floor extends to the left and right.
After reading the above cases, do you think it is good-looking and practical?
Thanks for viewing our website. Hopefully you can find your interested items. Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business. We are one-stop supplier of bathroom and kitchen products.
Ordinary sink, also known as drawn sink, is formed by pressing and stretching a whole piece of steel plate.
The principle is similar to balloon blowing, so the bottom and corner of the water sink will be thinned properly,
usually made of 0.8mm thick steel.
The Handmade Sink is not made piece by piece by hand, but made by cutting, bending and laser welding the steel plate.
Will not change the thickness of the steel plate in the corner, the sink is very sturdy and solid. Usually this thickness is 1.2-1.5mm.
The appearance has strong sense of line, and the weight is much heavier.
The small R angle of handmade sink is not only better in appearance, but also higher in the utilization of the whole sink space.
1. X Grooves Design
Optimized bottom slope makes kitchen sink draining faster than normal sinks. Gently sloped bottom, fast draining and dry after using.
Handmade X grooves design, not only increase the design aesthetic but also easy to drain water in a minute.
Rear set 3.5”drain matches most kitchen appliances and fits the most Common Garbage Disposal System and unlocks extra space.
2. Nano Surface Technology
Nano surface as Lotus leaf. Water and oil flow quickly and no trace left.
Hardness of Nano surface: >8H Hardness of regular surface: >4.5H
Extreme craftsmanship focuses on every detail of the sink. Meets the UPC, cUPC, CE certification standards.
3. POSCO 304 SUS Material
Durable scratch and stain resistant stainless steel surface helps the beauty last.
Real 16 / 18 gauge material; never chip or crack. Commercial grade satin finish. Thick 304 Stainless Steel construction.
9 - 10 inches deep large sink can hold a lot of pots and pans. Experience the luxury brought by the global high-end manufacturing industry.
4. Soundproof Pad - 7pcs
Extra-thick coating and thick sound rubber pad assure exceptional noise reduction.
Insulative padding can dramatically reduce the noise causing by water dripping,making an excellent effect on noise elimination.
It can enhance the elegance and high quality of the kitchen, and it will become the focus of your kitchen. The high quality of the sink is praised and recognized by the most demanding customers