Universal Hybrid Long Endurance Pull Down Faucet- Manufacturers Factory Suppliers From China

Whether the bathroom is beautiful and high-end mainly depends on the bathroom cabinet. Therefore, in order to achieve attractive looking and high practicability, the bathroom cabinet must have the characteristics of exquisite appearance and strong storage capacity.

 

Below, we have sorted out 20 high-value bathroom cabinets to see if there are any designs you like. If the bathroom in your home has not been renovated, the following overall design is also good for reference.

 

1. The bathroom with yellow walls and white fittings, plus retro fancy floor tiles, gives you a quite warm feeling. Round mirror + above counter basin + hollow under counter cabinet, this kind of bathroom cabinet design has both aesthetics and storage function. Really like it.

 

2. If the home is modern & simple style, this one looks really good. Grey and white are very stylish. If the bathroom is not so big, you can install one wash basin. With the design of mirror cabinet + wall cabinet, there is plenty of storage space. If you are afraid that it is hard to clean the countertop when using an above counter basin, then choosing an under counter basin is also good.

 

3. This is also a simple style. The mirror is on top, which has the effect of extending the view of the bathroom. You can also refer to this design for a small bathroom. The handle-less design of the under counter cabinet is really advanced.

 

4. This bathroom cabinet adopts the design of round mirror + above counter basin + layered wall cabinet. The log counter top is in harmony with the wood grain tiles on the wall and floor of the shower area. The overall design and style are unified.

 

 

5. This is a gray-green tone. Two drawer type lockers. Moreover, clothes that need to be washed can be placed under the wall cabinet. It is particularly practical and convenient.

 

6. This is a log style. The design of rock under-counter basin + log wall cabinet. There is the feeling of close to the nature. Gives a sense of tranquility.

 

7. This is a combination of simple + log style. If your bathroom has the same layout, you can also refer to the storage design in the picture above. Shelves are placed on the right. The bathroom cabinet also has the function of a washing machine cabinet. And there is a drawer for storage. A storage basket can be placed under the wall cabinet, which is also very practical.

 

8. This is a black and white match. The round mirror is matched with a black log cabinet. Very simple and clean. Patterned bricks are used to pave the ground. The bathroom reveals a retro atmosphere.

 

9. This log bathroom cabinet is in harmony with the orange wall. There is a color matching effect with the toilet area. Show a lively atmosphere as a whole.

 

10. This is a double wash basin design, suitable for larger bathrooms. But to be honest, the mirror tops the ceiling, which has the effect of lengthening the bathroom, making the bathroom look taller and larger.

 

11. This bathroom cabinet design is more stable and advanced. Especially suitable for business people, the overall style is very high-end.

 

12. This bathroom cabinet is beige and floor standing model. Fashionable with a little American style. The mirror is built-in, and there is a light strip design inside. Very nice.

 

13. This bathroom is a light luxurious design. Use dark blue with white. There is also a light gray bathroom cabinet as an auxiliary color. Simple and advanced.

 

14. When you are worried that the bathroom is too monotonous or mediocre, you can refer to the design above. The bathroom cabinet is gray-blue, which is particularly conspicuous and adds a deep sense.

 

15. This bathroom cabinet is light luxury American style. The handle and towel bar are made of polished gold metal. There are lights on both sides of the mirror to increase lighting. The design of four large drawers greatly increases the storage space of the bathroom.

 

16. The wood color and marble blend so well. Small bathroom can also refer to the picture above. Install a wall cabinet above the toilet to improve storage capacity. The handleless design is very advanced.

 

17. This is a marble paving floor and wall. Matched with dark gray bathroom cabinets. Simple and advanced.

 

18. This bathroom cabinet is very artistic. Retro floor tiles match dark green bathroom cabinets. The semi-hanging basin makes the whole look harmonious and distinctive.

 

19. This is a simple white bathroom cabinet with no handle design. In-wall faucet. Clothes that need to be washed can be put under the wall cabinet.

 

20. The main color of this bathroom is white and gray. The gray-green bathroom cabinets very well increase the vitality of the bathroom.

In China some people say that the struggle in the big city is so hard. Why not go to work in a small town? Is it worth struggling to afford a small apartment for a lifetime? I believe many people will find it worthwhile, because in big cities there are opportunities that cannot be found in small towns. The small apartment is not terrible. We can remodel it. As long as we have a dream, everything is possible. The owner Mr. Zhang who lives in Shanghai, like most ordinary citizens, worked hard all the way from the small hometown and finally settled in Shanghai and bought an apartment of 70 square meters. After having a child, Mr. Zhang took his parents from his hometown. A family of 5 squeezed into a small apartment. There was only one bathroom. Every morning and every evening, they were faced with taking turns to line up to take a bath and wash. They had no patience after some time. So he thought about making another shower room, and he can make the most of the balcony. Looking at the balcony that costs him a lot, only used to pile debris and dry clothes, Mr. Zhang felt it was a pity. He had heard of a case of transforming a balcony into a shower room before, so he wondered why not give it a try. If it fails, it will be dismantled after all. After talking to his wife, Mr. Zhang started serious research. After careful study, he summarized the following points to note:

 

First of all, it must be waterproof. Due to the special location of the balcony, the back may be the living room or bedroom. Considering that moisture may cause mold and peeling on the back wall, it is recommended that the waterproof layer of the wall where the shower is installed is painted as high as possible. The waterproof coating is generally brushed 2~3 times.

 

Second, make sure that the ground has a slope. The ground also needs to be waterproofed, and it is also necessary to ensure that the ground has a certain slope so that the sewage from the bath is discharged to the drain and will not flow back to the living room or other places.

 

Third, strengthen heat preservation. There is a big difference between the balcony shower room and the indoor shower room. Generally, the indoor shower room has only one wall with windows, and it can be kept warm by installing a heating system.

 

Finally, pay attention to the issue of privacy.

 

After studying how to install it, the next step is to choose a good shower room. Which products can meet this special demand? Because the balcony shower room is unavoidable from the wind and sun, we must pay attention to its material and anti-rust, anti-corrosion, and anti-fading ability. At the same time, pay attention to whether the frame is strong and stable, and the wall of the shower room must be strong.

 

After comparison, Mr. Zhang finally chose this shower room. This shower room is based on apartment space. The large apartment frame glass curtain wall, angular and cylindrical surfaces make the entire bathroom space richer.

At the same time, automotive-grade toughened glass has a thickness of 10MM, can withstand 700° high temperature, and has a high strength about 5 times that of ordinary glass, with outstanding impact resistance and thermal stability. In addition, EPM steel mold protection is added, so you don't have to worry about the risk of glass bursting. Even if it breaks, it will still stick to the debris to prevent the glass from splashing and hurting people. You can take a shower without restraint.

The door frame, handle and hinge outside the main body of the shower room are all made of high-quality aluminum alloy, and the surface should also be treated with anti-corrosion, anti-rust and anti-oxidation. In this way, there will be no signs of paint falling off after being exposed to the wind and sun on the balcony, and the structure is relatively strong and not prone to deformation.

In addition, the shower room is installed on the balcony. We will most worry about water will flow everywhere. This shower room has a overflow channel and magnetic tape, which can lock the water in all directions. Don't need to worry about getting the living room wet.

Home decoration is troublesome. Apart from other things, it may be very troublesome to choose the toilet. Although all the toilets on the market only have one function, there are many types. Choose from product details when purchasing. Know these 5 tips before buying a toilet.

 

1. Tips for Buying a Toilet

1) When selecting, you can tap the outer wall of the toilet gently with your finger. If the voice is hoarse, not clear and loud enough, then the toilet is likely to be internally cracked, or the toilet itself is not burned well.

2) The quality of the toilet depends on the quality of its ceramics. A good ceramic surface is uniformly lubricated and has a soft color. Gently touch the surface of the toilet with your hand. The glaze and embryos are delicate, indicating that the toilet is of good quality; for low- and medium-grade toilets, the glaze is rough and the color is dim, and small holes will be found under the light.

3) Pay attention to the return curve and water tank. Choose a glazed one, so that it is not easy to hide dirt and is easy to clean. When selecting, you must reach into the toilet's drain and touch it to see if the interior is smooth. A good toilet manufacturer will not ignore these two details.

4) Choose a toilet that is washable, otherwise you will definitely worry about cleaning the toilet in the future.

5) Test the flushing effect of the toilet pipe. Under normal circumstances, you must first try flushing before buying a toilet. There are some optimized flushing systems that can control the noise decibels below 50 decibels, which is very suitable for families with babies.

 

2. Precautions for Purchase of Toilet

1) The maximum flushing volume is below 6L.

2) Its own weight is above 40 kg.

3) Requirements for accessories: there is a delay water inlet valve; the water level difference is within 3mm; the water pressure has a wide range of application.

4) The height of the water seal is 55-60mm.

5) It is preferred that the inner side of the S-curve is also glazed on the toilet.

3. Precautions for Purchasing Smart Toilets:

1) It is recommended to select the instant heating method.

2) The impulse type is recommended for the water outlet method.

3) With power-off flushing function.

4) In addition to hot water washing and hot air drying, there are six mandatory functions: constant water temperature, sensor switch cover, night vision lighting, automatic deodorization, seat heating and seat bacteriostasis.

 

4. Shower

The shower can be divided into multiple product types according to the water outlet method, installation height, style, etc. When purchasing, pay attention to choosing the most suitable one.

How to judge the shower:

When buying a shower, first find out whether the water effect is good. Secondly, look at whether the surface coating is bright and smooth. Then check whether the shower valve core is made of ceramic, smooth and frictionless. Finally, see whether the shower accessories are appropriate and whether the quality meets the requirements.

 

Precautions for purchase of shower head:

1. It is recommended to choose ceramic valve core for ordinary shower.

2. Copper is recommended for the main body. Choose at least 59-1 copper, with 59% copper and 1% lead. It is recommended to choose CUPC certified showers.

3. It is recommended to choose a shower set with a lifting bracket and a bath faucet.

4. For those who like top spray and large water output, it is recommended to choose a concealed shower system.

5. Most of the items marked with "pressurized shower" achieve the "pressurized" effect by reducing the water outlet, and it is not very comfortable.

 

5. Bathtub

Before deciding to buy a bathtub, the first thing you need to consider is to choose the size of the bathtub according to the area of the bathroom, and set the height of the water outlet. It is also necessary to consider the particularities of family members, such as children, the elderly, and the disabled. When choosing a bathtub, it is best to choose a lower one, and you can also install handrails in an appropriate position. The bathtub itself should also have anti-slip treatment and so on. Relatively speaking, bathtub selection is more complicated.

 

Bathtub Purchase Skills

Gloss: understand the pros and cons of the material by looking at the surface gloss;

Smoothness: Check whether the surface of the bathtub is smooth by hand;

Firmness: the firmness can be tested by pressing by hand or stepping on the foot;

Sound: It is best to test the water to listen to the sound before buying. Don't choose a bathtub with too much noise.

 

Precautions for Purchase of Bathtubs:

1) The bathtub area is not very big. It only needs 1.2 square meters to install a standard bathtub.

2) The one-piece bathtub without separation is more practical.

3) It is better to have a hair filter in the water.

4) When choosing a bathtub with massage, bubble or mixed functions, you must try it first, and then choose the one that suits you.

5) Before the completion of the installation, the water storage and discharge experiment must be done under the standard water pressure, and both cold and hot water must be done.

6. Shower Room

Precautions for purchase of shower room:

1) It is recommended to choose anti-fingerprint treated stainless steel for the frame material.

2) It is recommended to choose a sliding door for the shower door. It has advantages over flat doors in terms of space occupation, convenience, and safety.

3) The recommended thickness of tempered glass is 8mm, and the minimum is no less than 6mm.

4) The quality of tempered glass is critical. Need to know about glass manufacturers and choose factories with CCC certification.

 

7. Bathroom Cabinet

Bathroom cabinets mainly include solid wood bathroom cabinets, ceramic bathroom cabinets, PVC bathroom cabinets, and acrylic bathroom cabinets. The solid wood bathroom cabinet is made of dehydrated solid wood as the base material. It has an exquisite appearance, high grade and good waterproof performance. However, solid wood bathroom cabinets are bulky and prone to cracking and require good maintenance.

Ceramic bathroom cabinets are relatively clean in appearance and easy to take care of, but they are easily damaged. The appearance of PVC bathroom cabinet is more shiny, and the cabinet is lighter, and the waterproof performance is the best. However, PVC bathroom cabinets are easily deformed when subjected to a collision. Acrylic bathroom cabinets are similar to PVC bathroom cabinets, but are more brittle than PVC cabinets, and are prone to scratches and cracks.

Bathroom cabinet selection method:

1) Check whether the bathroom cabinet is damaged, cracked or deformed.

2) Check whether the glazed surface of the bathroom cabinet is flat and whether the surface is cracked.

3) Check whether the various parts of the bathroom cabinet are tightly connected and whether it is used smoothly.

4) Look at the anti-fouling ability of the bathroom cabinet, which can be tested by scribbling and erasing.

 

Precautions for bathroom cabinet installation:

1) If you have not done in-wall inlet and outlet pipe renovation, it is recommended to choose floor-standing solid wood cabinets.

2) It is recommended that bathroom cabinets with a width of 1.4 meters and above adopt the design of double basins.

3) If the feet of the bathroom cabinet are made of wood, it is recommended to use a thin rubber pad to separate them from the floor.

 

When installing, there should be a 1cm gap between the bathroom cabinet and the wall to prevent the back panel from contacting the wet wall for a long time to cause get mouldy.

Some faucets are used two or three years, and the water flow is intermittent or rusted into green. The handle is hard to be used for opening and closing. The size of the water flow depends on luck.

Some faucets have been used for 20 years, and the surface is still as smooth as new. The feel when adjusting the angle of the handle is still as silky as the chopsticks in a honey jar. The speed of the water flow are still adjusted as you like. So how can we pick a faucet that can last 20 or 30 years or more?

First, the kitchen faucet can be rotated 360°.

For ease of use, the kitchen faucet should be taller, and the spout should also be very long. It is best to extend above the drain and not splash water. If there is a hot water line in the kitchen, this type of faucet should also contain hot and cold hoses. In order to meet various needs, most of the kitchen faucets can rotate the body of the faucet left and right. The sprayer part of some faucet can be pulled out, which is convenient for cleaning to all corners of the sink.

 

Second, if the budget is enough, the material of stainless steel is preferred.

The material of kitchen faucet is generally brass, which is the most common faucet on the market. However. Due to the characteristics of the kitchen environment, pure brass faucets are not necessarily the best choice. All pure brass faucets have electroplating on the outermost layer, and the function of electroplating is to prevent corrosion and rust of the brass inside. There is a lot of oily smoke in the kitchen, and the greasy hands and cleaners on the hands when washing the dishes make it often necessary to clean the faucet. If you do not use the correct way to clean, it is likely to damage the electroplating layer of the faucet, causing the faucet to be corroded and rusted. If you want to choose an all-brass kitchen faucet, you must be sure to have excellent electroplating, otherwise it will easily cause the faucet to rust and corrode.

And now some manufacturers use high-quality 304 stainless steel to make faucets. Compared with pure brass faucets, faucets made of high-quality stainless steel are free of lead, acid, alkali, corrosion, and harmful substances, and will not pollute tap water. This is very important for drinking water in the kitchen; and the stainless steel faucet does not need electroplating, it is extremely difficult to rust, and the hardness and toughness are more than twice higher than that of brass products, so it is very convenient to clean. However, due to the high difficulty of stainless steel processing, the current high-quality stainless steel faucets are usually relatively expensive.

 

Third, pay attention to whether the length of the tap can clean the sinks on both sides.

When buying, pay attention to the length of the basin and the faucet sprayer. If it is a double sink, pay attention to whether the length of the faucet can clean the sinks on both sides when rotating. Most kitchen faucets can rotate the body of the faucet left and right, which is convenient for cleaning to all corners of the sink.

There are no ifs in life, and even more for decorations. There is no what ifs after the decoration is finished. In order to avoid this kind of regret, we summarized many kitchen decoration experiences for you.

 

1. The most durable cabinet door panel is the fireproof panel, the shortest life span is the blister, the most non scratch resistant is the painted, the most expensive is the solid wood, and the cheapest is the double veneer.

 

2. The stainless steel countertop is the most durable, the artificial stone is the least resistant to dirt, and the quartz stone is the most expensive. If used frequently, stainless steel countertops are the most suitable. If the color tone is cold, you can use panels and tiles appropriately.

 

3. The stainless steel embossing countertop is less scratched than the brushed countertop.

 

4. The stove must have small openings on the surface to prevent the soup from overflowing into the stove.

 

5. The sink must have a bottom grid to prevent the sewer from being blocked and to facilitate cleaning.

 

6. When renovating water pipe and electricity, you must think about the cabinet layout and electrical requirements. Be sure to reserve enough sockets. It is better to keep sockets on the front and rear walls. Waterproof covers are not necessary.

 

7. If most of the gas pipes are wrapped in the cabinet, it is best to leave a gas alarm socket.

 

8. The tiles in the kitchen can be matte or polished, which are easier to clean. Don't choose pitted or rough models, which are difficult to take care of.

 

9. If you rarely cook, consider an open style. If cook much, it is safer to be closed. No matter how good a range hood is, it is impossible to suck all the fumes away.

 

10. The hose must be replaced every two years.

 

11. In addition to the main valve, it is better to have separate valves for gas stoves and gas water heaters, so that they can be closed easily when problems occur.

 

12. The sink drain must be made S-bend, otherwise the smell will return.

 

13. Do not apply glue between the stove and the countertop to facilitate safety inspection.

 

14. When installing the side range hood, it is better to be as close to the stove as possible.

 

15. If you install an ordinary or European-style range hood, it is better to install a thin stainless steel plate on the tile around the stove, so that it can be easily cleaned.

After the shower is turned off, the water still runs. Is it a quality problem?

Have you encountered a problem like this? After the shower was turned off, the water still ticked out. Sometimes after turning off for a long time, the water still flows out suddenly, and it flows fast. This is how it happened. Today, let's take a look at "The sudden water flow problem after the shower is turned off".

 

Regarding this problem, at first it was suspected that it was a shower quality problem. In order to clarify it, we also specially checked our showers, but this kind of situation still occurs. Later, we asked a professional to figure out that the water running after the shower was turned off was because of the water stored in the top spray and the shower pipe.

 

Professional explanation: In order to pursue the comfort of showering, the current shower head sprays are very large. The bigger it is, the more water there is after turning off the faucet. After use, the air pressure inside the shower is in equilibrium with the atmospheric pressure, so the water inside will not flow out temporarily. After some time, the water will flow out when the balance is lost. This is a problem with large-top showers. It is not that the shower is leaking or broken, so you can rest assured if you encounter this problem. If it is a constant dripping and leaking, then it is a quality problem.

 

So what should I do if the shower really leaks?

Analyze the factors of the shower leakage first. The main points are as follows:

 

1. The shower nozzle is blocked. If it is used for a long time, the water output will become smaller. If the water quality is not good, the water contains a lot of alkali, and scale deposits on the water outlet cause the shower to be blocked. At this time, it has to be resolved by the seller of the shower. Therefore, it is very important to choose a reliable seller.

 

2. Shower plating. Many people have found that the surface paint on the shower can peel off. It will be ugly after the paint is peeled off. If you have just bought a shower that has this problem, it will affect the appearance. In addition, some poor-quality showers will block because of paint falling off. So we have to take a closer look at the surface of the purchased shower for these problems.

 

When purchasing a shower, you must carefully observe whether the surface of the shower is smooth or not. If it is rough to the touch, it may be processed twice.

 

3. The material of the shower. Some showers are made of plastic or cast iron. The plastic shower head may contain a lot of waste material, and the service life will not be long. Of course, some hand showers that use plexiglass, ABS and other materials are still very good. However, it is not recommended that you choose the shower head made of cast iron, which is easy to rust. Many people who chose this shower are very regretful, because it didn't take long for it to rust. It's ugly, and it also blocked the water outlet and broke the entire shower. At present, the better material is copper. 

 

After knowing the reason, we can come to a solution. There are mainly the following solutions for leakage in the shower:

1. Leakage at the steering ball of the shower head. First unscrew the shower head from the steering ball ring, find the O-ring or similar seal inside and replace it, and then turn the shower head back. Just go to the original position.

 

2. Leakage occurs at the joint of the handheld shower. Select the right size shower hose and shower head according to the specifications, replace its rubber ring, and reinstall it.

 

3. Water leakage caused by gravel or sediment. Unscrew the shower head for cleaning. If necessary, soak the parts with vinegar and scrub the parts. Take care to avoid scratching it. If the shower head is an adjustable spray type, carefully check all movable parts for signs of excessive wear. If the rotating handle cannot move smoothly, the internal cam may be broken, and the entire shower head needs to be replaced.

 

4. The spray mode from the shower head becomes a mixture of spray and rain mode. If the shower is used for a long time, the water output will decrease. It may be because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet cause the shower to be blocked. It is also very simple to solve. For the shower head designed with silica gel particles, just gently knead it. If the scale is serious, you can put white vinegar in a plastic bag, wrap the shower and soak for some time, then rinse with water.

Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers. 

The products include faucets, sinks, basins, bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.

Look forward to cooperating with you.

Thanks a lot!

As a manufacturer of sanitary products for more than 11 years, we have seen many customers whose bathrooms are really full of functions. Although it is small, the functions are still very diverse. Have to admire!

 

Modern decoration requires both practical functions and individual style, so the budget is often difficult to control. The bathroom space usage rate is high. If you can save it everywhere, rework and repair will occur, and the gains will outweigh the losses. At the same time, the cost of furniture and decoration can also be spent more or less. The following are some small details on the bathroom decoration, which can save costs time and time again!

 

1) Waterproofing is essential for walls. 

Waterproofing in the bathroom is very important, not only to choose high-quality materials, but also to ensure professional painting. The wall waterproof in the wet area should be at least 180cm above the ground and 50cm for other places. The ground waterproofing generally needs to be brushed twice and a 24-hour closed water test should be carried out. Wall corners, water pipes, etc. should also be carefully done.

 

Ceramic tiles are the highlight of bathroom decoration. And the wall area is large. You can choose relatively economical tiles to ensure the waterproof performance. You can also directly paint with waterproof paint where it is not in the shower area. It will reduce cost.

 

Mosaics with rich patterns can enhance the visual aesthetics of the space. And to reduce material costs and manual laying costs, mosaics can be laid only on key positions. Tiles, waist line and top line can be selected according to your own needs to control the cost of decoration.

The original light-body wall is removed and replaced with a transparent glass wall, which expands the visual area of the space and also saves costs.

 

Mosaic paving requires a high labor cost, so you can find a large mosaic-like wall tile to pave the wall, which can save a lot of money. Since there are fewer gaps between large-size mosaic tiles, the amount of caulking agent is correspondingly reduced, which is often used for reference and selection in home decoration.

 

2) The floor area should be beautiful and non-slip.

Safety should be placed in the most important position, and slip resistance should be considered in the selection of floor tiles. At the same time, the human body will directly touch the ground, so the quality of materials should be paid attention to. Bright floor tiles are relatively slippery, so use them as little as possible in the bathroom, and use matte floor tiles or tiles with good anti-slip properties.

 

When paving the floor tiles, the slope must be appropriate, and the floor drain must be the lowest point so that the water can flow smoothly. The floor tiles should be made of whole tiles as much as possible, and the gap between the tiles should be controlled at about 2mm.

 

The area of decorative tiles on the ground is smaller than that of the wall. The use of interval paving can save the budget, and only use the same pattern of tiles to be separated by more than one tile.

 

If you want to create a low-cost bathroom with a natural texture, you can use wood-grain tiles instead of waterproof solid wood, which also has the characteristics of natural patterns, elegant colors, and easier matching with other sanitary wares.

 

Paving decal tiles in the bathroom can improve the monotonous bathroom style. In the actual construction process, the cost of laying decal tiles is much cheaper than mosaic.

 

When special-shaped handmade tiles are laid on the ground, they should be from the inside out, the gap between the tiles should be controlled within 8mm, and the height of the caulking agent should be level with the tiles. The paving of this kind of tiles should be carried out in sequence according to the serial number on the back to avoid waste caused by rework.

 

3) Cleverly arrange the exposed and concealed sanitary ware. 

The bathroom is a place where multiple channels of water and electricity converge. In the early stage of renovation, it is necessary to choose quality water pipes, wires, etc. And the wiring must comply with the regulations to avoid water leakage due to design and material selection problems.

As the space expands and functions increase, there are more and more electrical appliances in the bathroom. If you want to install smart toilet lids, integral shower rooms, massage bathtubs, multi-functional bathroom cabinets, etc., you must first make the sockets during the decoration to avoid rewiring in the future and increase the trouble.

 

The plumbing renovation of the bathroom is most laborious. If you want to save this part of the cost, the pipeline must be open-lined, without slotting, and future maintenance can also save a lot of costs.

In addition, avoid excessive wiring when rebuilding waterways and circuits. Use multi-hole sockets as much as possible on the panel of the socket. Under the premise of the same number of wires, you can plug in more electrical appliances. The wiring of the space is reconstructed with open wires, and the wires are routed from the top. The outer wall of the pipe is painted with waterproof paint, which saves a lot of labor costs and is also convenient for maintenance.

 

The bathrooms are uniformly decorated in black and white tones, simple and generous. The upper and lower water pipes of the sanitary ware are made of metal material, which has a long service life and is not easy to be damaged.

 

The space matching has been cleverly designed. The cement wall is matched with solid wood floor tiles, which is elegant and warm, satisfying practical functions and beautiful.

 

4) Shower Area

The quality of the glass used in the shower room is closely related to the safety of the bathroom. Fine tempered glass is generally difficult to break, and it will not hurt people when broken. Therefore, when choosing, don't be greedy for temporary cheapness, and try to choose high-quality, well-reputed brands.

The frame of the shower room is usually made of aluminum alloy, and the surface is sprayed with plastic, so it is not corroded or rusty. The thickness of the main frame aluminum alloy is preferably 1.1mm or more, which is not easy to deform.

 

In addition to professional brand shower rooms, the shower area can also be separated from dry and wet areas with various partitions. Common glass partitions only need to be installed on one side when combined with the wall, which saves costs by using less materials.

At the same time, the installation of the shower room can be omitted. The base of the shower room mainly plays the role of heat preservation and drainage, and the material is mostly acrylic.

 

The shower area is separated by a glass wall, and the ground is transitioned by steps to create a semi-enclosed shower space. The glass partition is directly fixed with hardware without reaching the top, which gives the space better permeability.

 

A wall serves as a partition, separating the wash area from the shower area. The interior of the wash area is covered with ceramic tiles, the exterior is painted with waterproof paint, and the key parts are strengthened.

 

5) Wash Area 

The floor drain is most commonly used for sink, and the wall mount type can be used for more advanced spaces. It is best to have all S-bends to prevent upward odor. Basins are divided into above-counter basins, under-counter basins and wall-mounted basins. Above counter basins for households are more suitable and easy to install. The under counter basin is suitable for a large area bathroom, and the installation is relatively complicated.

 

Small-space or low-budget families can abandon the overall bathroom cabinet, and use a transparent iron frame to save space and leave more space for the legs. Mirror cabinets and recessed cabinets are more suitable for small spaces and complete the storage function of the bathroom. To reduce the cost of decoration, you can choose a single color and simple style in the decoration, and match it with retro copper-colored, metal-colored faucets or mirror lights to create highlights.

 

Build the washstand with cement, and place storage baskets underneath. The wall-mounted faucet is highly decorative, but the size must be measured accurately in advance, otherwise it cannot be installed, which will affect the use.

 

There is no special furniture under the basin; only metal racks are used to save costs and place toiletries.

 

Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We have rich experience and passion in bath and kitchen industry and appreciate your contacting and business. Look forward to cooperating with you. Thanks a lot!

Product Diversification

At present, the concept of sanitary ware products has far exceeded the traditional concepts of the past. As a symbol of modern and luxurious life, it has entered all aspects of people's lives. That is, it not only has sanitation and cleaning functions, but also includes health care functions, visual enjoyment, and entertainment functions. The shape of sanitary ware products has appeared in one-piece type, basin series, bidet, or table-top series, etc. In recent years, sanitary ware products have also launched a series of complementary products with additional functions such as leisurely bathtubs, cabinet basins, and steam shower rooms. Therefore, in the future, it is self-evident that the sanitary ware market will show a diversified development trend.

Build A Complete Accessory Manufacturing Base

Now due to the increase and enrichment of new functions of sanitary ware products, the sanitary ware production of developed countries has been involved in a large number of accessories.

Therefore, a mature sanitary ware industry should be supported by more varieties of accessories and additional products. For example, the production of raw materials, glazes, pigments, models, machining, instruments, meters, copper work, and packaging and decoration materials that are closely connected with many sanitary ware production systems should be incorporated into the entire production system as soon as possible. The sanitary ware production industry in China urgently needs to form a complete industry group and supporting group related to sanitary ceramic production, and form a processing base for various related accessories that are compatible with the end products.

The Comprehensive Functions of The Product Are More Prominent

According to the shopping psychology of consumers in the international market, a good sanitary ware product must be able to satisfy a modern lifestyle and have a relatively complete set of functions. For example, in addition to satisfying the use function, it also needs to solve multiple functions such as water saving, energy saving, environmental protection, comfort, health care, anti-aging, and intelligent induction, and has obvious recyclability and a strong concept of green consumption. This requires a new generation of products that must be able to make full use of comprehensive high-tech achievements such as biotechnology, electronic technology, and induction technology to combine various new functions to improve the comprehensive functions and physical quality of sanitary ceramic products.

Rich Decorative Colors

In the past, sanitary ware products were often decorated with white glaze to show their white jade-like appearance. But the cool tone of its color makes many people feel uncomfortable. Nowadays, it is generally recognized that various opalescent white glazes are mainly used for the appearance of products with other colors and shades. China sanitary ware factories should use the coordination of various glazes to create a variety of popular new decorative colors. The changing rhythm of sanitary ware products, just like the promotion of popular colors in major international clothing exhibitions in the world every year, shows the visual function of leading new trends in colors from time to time. With the continuous updating of people's aesthetic perspectives and the rapid changes in domestic and foreign market demands, it is necessary to accelerate the development of a new generation of glaze decoration varieties and strengthen the new color decoration of products.

 

In short, China sanitary ware factories must continuously improve the technical content of export products, and continue to improve the grade and added value of export products. Continuously develop a new generation of new high-end products to meet the needs of domestic and foreign markets. It is conducive to entering the international high-end market. It is believed that China sanitary ware factories will become stronger.

PARLOS Waterfall Widespread Bathroom Faucet 2 Handles with Pop Up Drain

Find Tall Basin Faucet Manufacturers

Akicon? Pull Out Kitchen Faucet with Deck Plate, Single Level Solid Brass Kitchen Sink Faucets with Pull Down Sprayer - Oil Rubbed Bronze AK 96418-D-ORB

Kitchen Faucet Stainless Steel Deck Mounted Pot Filler Faucet Hot and Cold Water Commercial Kitchen Sink Tap Folding Stretchable Double Joint Swing Arms Single Handles Brushed ￡8099 Get it Saturday, Oct 1 - Friday, Oct 7 FREE Delivery

DEMENSIONS: Oversized 10" STAINLESS STEEL kitchen

1 KRAUS KWT310-33/18 Kore Workstation 33-inch Drop-In 18 Gauge Single Bowl Stainless Steel Kitchen Sink with Integrated Ledge and Accessories View on Amazon SCORE 9.8 TR Score …

Factory Direct Supplier Low Price Kitchenware Topmount Stainless Steel Double Bowl Kitchen Sink,Encontre detalhes sobre Workstation Sink, China Wholesale a partir de Factory Direct …

Black Stainless Pot Filler | Wayfair Showing results for "black stainless pot filler" 5,864 Results Sort by Recommended Black Friday Deal 5 Colors Contemporary Pot Filler by Delta From