Washbasin Double Handle Widespread Faucet- China Factory Manufacturers Suppliers

For a more useful and faster-drying bathroom, toilet, shower, and washbasin must be separated.

The toilet, washbasin, and shower located in three areas allows people to use them separately.

 

This design has more advantages. 

1. Dry area always being dry.

Using a three-separated bathroom, when the shower is completely independent, the sink and toilet area will not be affected by the shower. Cleaning is also more convenient.

 

2. More people can use the bathroom at the same time.

In the morning some want to use the toilet and some want to brush their teeth. If there is no separation, as long as one person enters, the whole family will have to wait.

However, with the three-separated bathroom, everyone can save time and use separately.

 

Three-separated Bathroom Layout

If the bathroom is a long and narrow shape, it is recommended that the toilet, washbasin, and shower are arranged in a row.

Usually the most frequently used washbasin will be placed in the middle, so you can come in and use it at any time. To the left and right are the shower area and toilet.

The toilet and the shower area can also be arranged on the same side, and the washbasin is placed on the opposite side to form a T-shaped arrangement. Hotels often use this layout, which is relatively confidential, but does not waste space.

 

If you want to add a bathtub, because the bathtub is used less frequently, it is usually placed in the corner next to the washbasin.

 

But to be honest, the three-separated bathroom requires a relatively large area. The partition wall will be added, and the distance between the shower, toilet and washbasin will be increased. If three separations are used, it is bound to reduce the size of other spaces.

 

Design and Construction Considerations

1. The minimum shower area wide is 90cm.

The shower area should be kept wide enough for the person to turn around, and hands should not touch the wall easily when showering. It is convenient to have a width of at least 90 cm.

 

2. The toilet area is at least 70cm wide.

If you don't want it too narrow when going to the toilet, the wall should not be too close. Starting from the center of the toilet, leave a width of 35 cm or more to the left and right to make it easy to use.

The human action is to turn around and sit down on the toilet, so 60 cm of moving space is required in front of the toilet.

 

3. If the toilet is adjacent to the shower area, the water pipe is easy to install.

When the toilet and the shower area are adjacent to each other back to back, the pipeline can be hidden in the partition between the two, and the distance of the pipeline can be shortened.

 

4. There is no need to install a floor drain in the toilet and washing area.

Since the three-separated bathroom has completely separated the toilet, washbasin and shower, and now fewer people will flush the floor. Therefore, it is only necessary to install a floor drain in the shower room. Blocking with waterproof strips can ensure that the toilet and washbasin area remain dry. For floor cleaning in dry areas, it is recommended to wipe with a mop.

 

5. Reduce the area of waterproof coating.

Ordinary bathrooms are usually recommended to do waterproof layer on the walls and floors of the whole room due to the spread of moisture. However, in the three-separated bathroom, there will be no excess water vapor in the toilet and washbasin area. It is recommended to do waterproof only half-height walls.

 

Then we take a look at the examples of the three-separation bathroom.

 

U-shaped Layout

This is a typical hotel bathroom layout. The sink is in the center, and the toilet, shower area, and bathtub are placed on both sides, forming a U-shaped layout. Suitable for use in large-area bathrooms.

 

The doors of the shower room and toilet area are designed with metal mesh, which is ventilated and can be cleverly hidden.

 

The walls and floors of the whole room are paved with the same marble. With metal accessories, the overall style is particularly high-end.

 

One-line Layout

With the double washbasin design, two people wash at the same time without being crowded. With double-sided mirrors and wall lights on both sides, it forms a balanced and symmetrical design.

 

The retro tile floor, the decorative pillars on both sides of the countertop, the delicate and elegant chandeliers, the natural and romantic simple European style.

Off-white is selected as the main color of the space, matched with earth-colored walls. The calm atmosphere makes the bathing space more comfortable and relaxing.

 

If you don't make a door, just use cement partition to separate the shower area or toilet, which can reduce the visual barrier.

A sliding door is used between the shower area and the bathtub, which can be ventilated at any time and can achieve the effect of privacy.

Two-line Layout

The washbasin area is in a single row. Since it is isolated from the shower area, it is relatively dry. The dressing storage is also set together, making it easier to use.

The wash area is in line with the toilet area. The bathtub is next to the shower area. Effectively separate the dry and wet areas. At the same time, hooks are installed on the wall for the towels and bathrobes.

 

If the bathroom does not have a window, you may wish to use colors and lights to brighten it up. The orange half-wall design makes the space bright and vibrant. Place some flowers and plants to make it more vibrant.

The wall is made of cement gray, so even if water drops splash off, it will not leave a trace. The mirror cabinet on the top can effectively increase the storage capacity.

 

In order to leave the central aisle, move the sink outside. Arranging the shower area and the toilet back to back not only effectively shortens the length of the water pipe, but also makes the design more concise.

In a typical T-shaped layout, the shower area and toilet are hidden behind the washbasin to maintain privacy. The wash area divides the bathroom into two parts.

 

The entrance of the bathroom is designed with arches, and the retro red bricks are more antique. The tiled floor extends to the left and right.

 

After reading the above cases, do you think it is good-looking and practical?

 

Thanks for viewing our website. Hopefully you can find your interested items. Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business. We are one-stop supplier of bathroom and kitchen products.

Let there be a lot of things outside, leave a corner quietly in the room. 

Under the dim sky, admire the bright moon. 

Talk about the wonderful life with your lover. 

Continue the romantic vow of "hold your hand, grow old with you".

Enjoy every inch comfortable cozy time with your heart.

Shakespeare wrote: "There are a thousand Hamlets in a thousand people's eyes." There are also a thousand homes in a thousand people's eyes. So what are the home design styles that current couples love? How to create a sense of happiness at home in the two-person world?

Choose Home Style:

01 Simple Style 

The world of young people is always simple and beautiful. The simple style is not only the simplification of design elements, but also the serenity, comfort and warmth of a two-person home.

02 Modern Style 

Sweet time is always quiet and happy. The modern style pursues the practicality and flexibility of the space. Through the mutual penetration of functional spaces, and the transparency of simple wide areas, it can give romantic couples more practical applicability.

03 Nordic Style 

The romantic two-person world is always sweet and warm. The Nordic style with logs and white as the main colors, from layout planning to detailed experience, gives people a simple, fresh and natural feeling. It adds points to sweetness.

Use Decoration Skills:

As a two-person home, it is necessary to clarify the living requirements before decoration design. Do a good job of space planning. Increase the functional area as much as possible, and pay attention to the following two decoration tips:

01 Choose Light And Medium Colors To Extend The Space:

Choose bright colors in an exclusive space suitable for two people to live in. The visual sense will be strong. In terms of color, light tones and intermediate colors should be selected as the basic tone of furniture, bedspreads, sofas, and curtains, supplemented by low chroma space. Extend the space to form a warm home atmosphere.

02 Choose A Uniform Material:

The home for two embraces warmness and brightness. The color of the ground can be used in the color system with strong brightness and low purity. Use pebbles to make its own guiding line. In the flowing atmosphere of light and shadow, feel the quiet time between two people.

Create A Home Style That We Love

 

01 Living Room:

As the most functional area in the home, the living room can not only meet guests and friends, hold small family gatherings, but also entertain and relax the body and mind. Before decoration, you can use the open design to expand the space in the living room. If you seldom meet guests at home, you can also change the living room to a study room to create a small and flexible two-person world.

02 Bedroom:

One-third of a person’s life is spent in sleep. The bedroom of two people should be kept in a clean and tidy color, interspersed with delicate small objects. Create a romantic and warm atmosphere, so you can feel the pleasure and relax as soon as you enter the room.

 

03 Kitchen:

Japanese writer Yoshimoto once wrote in "The Kitchen": "In this world, I think my favorite place is the kitchen." The expectation of a better life in the couple's room has been witnessed by the kitchen. Even if the space in the house is small, a small round table can be placed next to the sofa, which is enough to make the most romantic dinner for two people.

 

04 Bathroom:

As a frequently used area in the home, the bathroom is small, but it is a very important part of the decoration. If the decoration design is not in place, it will affect the happiness of family living. Therefore, before the decoration design, while focusing on individualized and practical design, it is also necessary to control all the details of the bathroom to prevent the lovers' daily life from being affected.

Recommend 1: Black Shower Head and Handle Set

A shower helps you wash away the exhaustion caused by a busy day’s work. While getting rid of the fluctuating water flow, enjoy a new comfortable shower experience. Let your body and mind get a great relaxation and rest. The water flow is smooth and not easy to be blocked, bringing a more hearty shower experience. The unique in-wall waterway design, simple silicone surface, and smooth lines make people feel friendly and comfortable, and also increase the overall beauty and sense of space.

Recommendation 2: Bathtub

 

At the end of a day's work, go home and soak in a comfortable hot bath. Lazy, relaxed and at ease. But many can't pick a bathtub, and worry about wasting space and interfering with the normal use of other bathroom functions. Don't panic. Aquacubic can help. A variety of product specifications can meet different needs. The soft arc, elegant design, and unique color matching enhance the fashion sense and decorative effect of the entire bathroom. The pure white color satisfies the sense of cleanliness. Enjoy the clean experience easily. When you take a bath, you can enjoy the moment of immersing your body in warm water, relieve fatigue and decompression, which greatly satisfies the lovers' pursuit of high-quality life.

 

Practical and comfortable household products simplify the steps of life, improve the quality of life, and enhance the sense of happiness in life. Work with Aquacubic to create a sweet and warm home for two people, enjoy the love and care given to each other, and let the love heat up.

This article introduces the three main components of the faucet. It will help you to understand the quality and material of faucets we use everyday. Uncover all the mysteries of the faucet.

 

Part 1: Composition

The three most basic components of a faucet: main body, plating and cartridge.

01 Main Body

The main body is the torso part of the faucet. The water flows in and out of the main body all the time. So the material is important. It determines the water quality.

 

Copper Alloy Faucet

Copper alloy is currently recognized as the most suitable main material for home use faucet, and the mainstream is brass. On the one hand, copper has good machinability, fluidity and formability. On the other hand, because copper ions have a bactericidal effect, they can kill super bacteria such as MRSA within 30 minutes and prevent the bacteria from producing antibodies. The inner wall of the copper faucet will not breed bacteria and become the most suitable carrier for "water".

 

According to different proportions of copper content in copper alloys, copper alloy materials can be divided into 52, 55, 59 and 62 copper. Among them, 59 copper is the best. The content of copper metal is 58%-60%, the content of lead metal is 0.08%-0.2%, and the content of other elements is about 2%. The remaining metal is basically zinc.

 

Because lead metal will precipitate when water enters the faucet, it will pollute the water. If the lead content is too high, it is harmful to the human body. Therefore, some brand faucets use low-lead copper, that is, the lead content is less than 0.1%. In view of the fact that it is difficult for general consumers to judge the lead content, it is recommended to choose a faucet with a clear mark that uses low-lead copper.

 

Zinc Alloy Faucet

Zinc alloy is an alloy based on zinc and added with other elements such as aluminum, copper, magnesium, cadmium, lead, and titanium. Zinc alloy is easily corroded in water. After being corroded, the metal will be mixed into the water and cause harm to the human body. The biggest advantage is probably the low price.

 

Stainless Steel Faucet

The main components of steel are iron and carbon. Ordinary carbon steel is easy to rust. Adding chromium, nickel and other metals to carbon steel can make the steel corrosion resistant. Therefore, the most important factor affecting the corrosion resistance of stainless steel is the content of chromium.

 

Stainless steel has the advantages of acid resistance, alkali resistance, corrosion resistance, and no release of harmful substances (lead). But compared with copper, it has one of the biggest drawbacks, that is, it does not have antibacterial function.

 

Brief Summary

If the budget is sufficient, choose low-lead copper faucets. If you can't identify whether it is low-lead copper, choose a product from a big brand.

If you have a small budget, you can choose stainless steel faucets. The price will be cheaper. However, relatively there will be some problems. In particular, we must choose products from high standard manufacturers. After all, it's about your own health, don't be greedy for cheap.

 

 

02 Plating

The faucet is used in a humid environment, and its surface requires a good finish. The common surface treatment method on the market is electroplating, mainly including chrome plating, nickel plating, titanium plating and so on. In addition, there are some rarer methods such as baking varnish, porcelain, and imitation gold electrophoretic paint.

 

Chrome

Chrome plating is the most common faucet plating. Chromium is a white metal with a bluish color, which has high hardness and wear resistance. Its hardness exceeds even the hardest quenched steel, second only to diamond.

Chromium is not easy to change in a humid environment and can maintain the surface gloss for a long time. With a silver appearance, chrome-plated faucets are more popular with consumers.

 

Nickel

Nickel can quickly form a very thin passivation film on the surface of the faucet. Can resist the corrosion of water vapor and certain acids. Has excellent corrosion resistance and stability. Can resist the corrosion of water vapor and certain acids. Therefore, the stability of the nickel layer in a humid environment is very high.

Titanium Alloy

Titanium alloys are made by adding aluminum and tin elements or aluminum and vanadium elements to titanium. Electroplated titanium gold has the advantages of high strength, low density, strong toughness and good corrosion resistance. The surface of the titanium-plated faucet is as smooth as a mirror. Its golden luster looks elegant and rich, and very decorative. However, the process of plating titanium gold is complicated. It is very easy to absorb impurities during thermal processing. Therefore, the yield is low. The cost is also higher.

 

Baking Varnish

Baking varnish is to put two layers of coating on the faucet. Each time the paint is applied, it is sent to a dust-free constant temperature baking paint room for electric heating or far-infrared high temperature baking.

The surface of the baking varnish faucet is smooth and shiny, which can present a visual texture similar to that of a piano, making the whole product look very high-grade. However, compared with other surface treatment methods, baking varnish faucets are more prone to surface peeling. The durability is not as good as the traditional chrome-plated faucet. This method is not widely used.

 

Brushed

This treatment will make the surface of the faucet visually rough. However, it is quite delicate to the touch, showing a restrained beauty. The brushed process mainly relies on mechanical friction to produce several common textures such as straight lines, chaotic lines, threads, corrugations, swirling lines and intermittent silk lines on the surface of the faucet. It can also create matte, mirror, three-dimensional, embossed, satin and other effects.

 

Brief Summary

Appropriate surface treatment can make the overall shape of the faucet rich and full. Choosing the right faucet can also become the finishing touch to the bathroom decoration. It is pleasing to the eye.

There are generally multiple layers of plating. There are also some cheap faucets that are only coated one layer. The coating is not as thick as possible, but just right. If the coating is too thin, it will not be able to prevent corrosion. If the coating is too thick, it is easy to peel off. Copper + nickel + chromium is best. Copper can provide excellent adhesion. Nickel makes the coating have excellent corrosion resistance. Chromium makes the surface bright and flawless, and it is hard and scratch-resistant. Further improving the corrosion resistance. In addition, the faucet that has passed the 48-hour professional salt spray test will be more guaranteed in terms of corrosion resistance. Aquacubic's products have passed these tests.

 

03 Cartridge

The cartridge is a part that realizes the basic functions of direction control, pressure control or flow control by means of the rotation of the valve stem. The water flow enters the main body of the faucet through the cartridge and finally leaves the water outlet. The faucet used at home is turned on and off countless times a day. It can be seen that the quality of the cartridge is also very important to the faucet.

Ceramic Cartridge

The ceramic cartridge has less water pollution, good wear resistance and good sealing performance. Many high-quality faucets use ceramic cartridges. The ceramic chip must have good airtightness, stable physical properties, wear resistance, and long service life.

 

Stainless Steel Cartridge

The biggest advantage of the stainless steel cartridge is that it has a larger adjustable angle of rotation and is not easily affected by water quality. It is more practical to choose this type in areas with poor water quality. However, stainless steel has worse wear resistance compared to ceramic. After it is used for a long time, water leakage is prone to occur.

 

Roller Cartridge

Roller cartridges are old-fashioned cartridges. No matter in terms of price, water pollution or life span, they are inferior to ceramics and have been phased out. There are very few roller cartridge faucets on the market.

 

Part 2: How to Buy ?

After understanding the most important parts of the faucet, let's take a look at the precautions when purchasing.

 

01 The Weight

Faucets made of brass are heavier. So you can make a preliminary judgment by weighing the faucet. However, many manufacturers can increase the weight of low-quality faucets through some methods. So here is a commonplace saying, for consumers who can't distinguish the material, it is better to choose the leading brands. This is the simplest selection method.

02 The Surface

In sufficient light, carefully observe the electroplated surface of the faucet. Good electroplating looks as bright as a mirror, without any oxidation spots and burn marks, no pores, no blistering, no plating leakage, no burrs to the touch. After pressing the faucet, the fingerprints will spread out quickly, and it is not easy to adhere to dirt.

 

Breathing out the surface of the faucet. For products with good electroplating quality, the water vapor will quickly and evenly fade away. If the quality is not good, the fading speed will be slower, or not fade. The faster and more even the water vapor fades, the better the quality.

03 After-sales Service

The after-sales service of the product is very important, and it is also the guarantee for you to have no worries. Be sure to buy products with good after-sales service. The general faucet is guaranteed for at least 5 years.

 

When choosing a faucet, the most important thing is to look at the material, plating and cartridge of the faucet. Because the material determines the safety of the water. The coating can increase the service life of the faucet, so that the faucet has scratch resistance, corrosion resistance, and the surface brightness will be better. The cartridge is the heart of the faucet. Generally high quality faucets use ceramic cartridges. It has the characteristics of strong wear resistance and good sealing performance.

Some faucets are simple and practical, while others are decorative. Faucets can be in many different materials and shapes, such as short/high, single/double handle, stainless steel/brass, chrome/black/gold colors, etc. It can reflect the contemporary architectural decoration style. Also so many brands of faucets are available. Do you want to know the best faucet brands in China? Let's take a look at the ranking of China's top 7 faucets brands in 2020.

Ⅰ. MOEN

Moen entered the Chinese market in 1994 and established its first sales company in Waigaoqiao Free Trade Zone, Shanghai. In the following few years, American Moen company has established offices in Shanghai, Beijing, Guangzhou and Chongqing, and its sales network has covered more than 180 cities in China. In 1996, Moen set up a joint venture factory in China with global advanced production management and manufacturing technology, which shows its confidence in the Chinese market and its determination to develop in China for a long time. At the same time, all the factories in China have passed ISO9001 quality system certification and ISO14001 environmental system certification. Relying on the deep understanding of the needs of users, distributors, agents and professionals in the industry and the joint efforts of all employees, American Moen company has become one of the leading figures in China's kitchen and bathroom equipment industry, and has established a strong sales network and perfect after-sales service system. The company's business is developing rapidly, and its products are deeply loved by users.

Ⅱ. Jomoo

Founded in 1990 and headquartered in Quanzhou, Fujian Province: the Economic Zone on the west side of the Taiwan Strait, Jomoo Group is a large comprehensive bathroom leading enterprise and a national high-tech enterprise integrating R and D, production, sales and service. It is also the Secretariat of "Kitchen and Bathroom Hardware Sub-technical Committee of National Hardware Standardization Technical Committee". The group's brand "JOMOO" has won many national honors such as "China's Famous Trademark", "China's Environmental Label Product Certification", and has been selected into the government green procurement list for many times.

Jomoo group headquarter covers an area of more than 1.34 square kilometre. It owns 7 subsidiaries, 4 business divisions and more than 8500 employees. Since its establishment, Jomoo group has taken "creating healthy kitchen and bathroom life, making the earth environment better" as its mission. Through continuous scientific and technological innovation, Jomoo group has made great efforts to provide customers with safe and environmental protection, resource-saving products and high-quality services, and constantly improve and enhance the quality of home life.

Ⅲ. Hansgrohe

In 1995, Hansgrohe set up an office in Shanghai to introduce the world's top bathroom brand to China. Hansgrohe Sanitary Products (Shanghai) Co., Ltd., a wholly-owned Chinese subsidiary of Hansgrohe group. It was established in Shanghai Songjiang Industrial Zone. It is also the fourth wholly-owned factory invested by Hansgrohe abroad. 

2000: Hansgrohe sponsored the publication of the Chinese version of <The History of European Bathroom Culture>, which once again shows Hansgrohe's long-standing bathroom culture. 

2001: Hansgrohe celebrates its 100th birthday. Four offices have been set up in Shanghai, Beijing, Guangzhou and Chengdu; A total of 50 stores and 20 distribution points were set up, successfully occupying the high-end bathroom market; Many high-end residences and hotels use Hansgrohe products. The representative projects are Grand Hyatt Shanghai, Venice Shenzhen, Hilton Chongqing, Beijing Hotel, GE Times, etc.

Ⅳ. Kohler

Kohler, founded in 1873 and headquartered in Wisconsin, is one of the oldest and largest family businesses in the United States. Kohler is a global leader in kitchen and bathroom products, engine and power generation systems, furniture, home decoration, hotel services and first-class golf clubs.

As early as the 1930s, Kohler products had a deep relationship with China. Kohler sanitary ware was used in many famous buildings in Shanghai, such as Jinjiang Hotel and Da Guang Ming Cinema. In 1995, Kohler's China office was established in Hong Kong. Since then, Kohler has officially entered the Chinese market. In 1999, Kohler set up its headquarters in Shanghai and set up offices in Beijing, Shanghai, Guangzhou, Chengdu, Wuhan, Hangzhou, Nanjing and Shenzhen. Till today, Kohler has 10 factories, more than 500 regular exhibition halls and more than a dozen flagship stores in China.

Ⅴ. COSO

COSO originated in Germany. Since 1993 when it came to China to create a professional sanitary ware production base, COSO has created logical and beautiful product by virtue of German industrial design concept, first-class material, ergonomics benchmark, mathematical space, rigorous manufacturing and rational beauty. COSO has won the support and recognition of the majority of consumers. After years of development, COSO has become a global leading brand of healthy sanitary ware.

In the industry, COSO products take the lead in passing ISO9001:2000 quality management system certification and EU CE certification. It has won the titles of "China Top 10 Brands of Sanitary Ware", "China Top 10 Brands of Building Materials", "China Energy Saving and Environmental Protection Promotion Products", "China Famous Brand", and "China Original Bathroom Design Award in 2007”. In 2020, the company participated in Shanghai World Expo to fully demonstrate the value and strength of the brand.

Ⅵ. TOTO

TOTO was founded in 1917. It was initially named Toyo Pottery Co., Ltd., and then renamed TOTO Co., Ltd. In 1912, TOTO set up a laboratory specializing in the research and development of sanitary ceramics (at that time, sanitary ceramics products were very common in Europe and the United States, but wooden toilets were still popular in Japan, which was in great contrast with the advanced sanitary culture in Japan today). With the wide sales of these sanitary ceramics products, TOTO used its excellent products to challenge the traditional health concept which has been accepted by the public. Till today TOTO is still working hard for it.

TOTO is a manufacturer of sanitary ware and related equipment for civil and commercial facilities. Pursuing high quality and high technology, so that users can enjoy a sanitary, healthy and comfortable life is the consistent goal.

Ⅶ. Grohe

Friedrich Grohe AG CO. KG Group is a world famous supplier and global exporter of sanitary ware products and systems. Founded in 1936, it has branch offices, 12 production plants and 17 business subsidiaries in 140 countries around the world.

It adheres to the founder's spirit of precision and high quality. Its business covers most countries and its reputation spreads all over the world. Grohe has made remarkable achievements. With the company moving towards a new global environment, the total turnover of Grohe increased to 1.5 billion CNY in 2020, and the export volume accounted for 64.3% of the group's total turnover.

Kitchen Design

When designing a functional kitchen, the rule of triangles should be kept in mind. That is, the sink, stove and refrigerator are arranged in a triangle. The L-shaped kitchen fits this triangle shape very well. The L-shaped layout is most suitable for small and medium-sized kitchens. The first-class kitchen is not only about the layout, but also about creating delicious food through the inspiration of the right layout.

 

1. The large patterned backsplash and striped floor are the highlights of this colorful kitchen. A small semi-circular breakfast bar is set up on one side of the room, allowing guests to have conversations with busy chefs, or have a quick snack or a morning coffee here.

 

2. This red kitchen has an open shelf filled with useful decorative items.

 

3. Colorful furniture and hardware accessories work well when paired with white or light-colored upper wall cabinets, so as not to oversaturate the space.

 

4. Since the L-shaped kitchen only uses two walls, they naturally open up the space. This is an ideal kitchen, a natural connection with the living room or dining room.

 

5. Using eye-catching design features, a black wall cabinet is installed on one wall of the kitchen. Formed to correspond to the light-colored cabinet on the other wall.

6. By adding carpets, the space feels more rectangular. Place a tall decorative vase on the floor at the end of the floor-to-ceiling cabinet to soften the appearance of hard edges.

 

7. If the budget allows, please use some retractable doors to replace the kitchen wall on one side, leading directly to the outdoors. The added natural light and space to overlook will truly change your kitchen.

8. A large floor-to-ceiling window with a view of the garden can also bring great satisfaction. The shutters here are wooden, matching the horizontal strips around the kitchen cabinets. Several geometrically shaped succulent flower pots match the backsplash, forming a perfect modern pattern.

 

9. This yellow L-shaped kitchen with breakfast bar is equipped with a matching yellow refrigerator.

 

10. Decorate the blank kitchen walls with some printed art, which is also a good way to mark dining spots.

 

11. Even if the counter extends beyond the "L" here, it is added to the overall design because it brings ingenious inspiration to the L-shaped kitchen with corner windows.

 

12. The display of decorative wood board is a beautiful and suitable terminal.

 

13. There is a luminous wooden slit between the crisp white cabinets, which looks clean and inviting.

 

14. Build a squatty vacant storage space in the L-shaped wall cabinet. For example, this white frame kitchen design with wooden color.

 

15. The wine cabinets standing high in this black kitchen are sure to delight the guests!

 

16. Large plants are placed on the edge of the L-shaped kitchen. The LED-lit bookshelf brightens the wooden functional wall.

 

17. Another wine rack in the L-shaped kitchen with a peninsula.

As a manufacturer of sanitary products for more than 11 years, we have seen many customers whose bathrooms are really full of functions. Although it is small, the functions are still very diverse. Have to admire!

 

Modern decoration requires both practical functions and individual style, so the budget is often difficult to control. The bathroom space usage rate is high. If you can save it everywhere, rework and repair will occur, and the gains will outweigh the losses. At the same time, the cost of furniture and decoration can also be spent more or less. The following are some small details on the bathroom decoration, which can save costs time and time again!

 

1) Waterproofing is essential for walls. 

Waterproofing in the bathroom is very important, not only to choose high-quality materials, but also to ensure professional painting. The wall waterproof in the wet area should be at least 180cm above the ground and 50cm for other places. The ground waterproofing generally needs to be brushed twice and a 24-hour closed water test should be carried out. Wall corners, water pipes, etc. should also be carefully done.

 

Ceramic tiles are the highlight of bathroom decoration. And the wall area is large. You can choose relatively economical tiles to ensure the waterproof performance. You can also directly paint with waterproof paint where it is not in the shower area. It will reduce cost.

 

Mosaics with rich patterns can enhance the visual aesthetics of the space. And to reduce material costs and manual laying costs, mosaics can be laid only on key positions. Tiles, waist line and top line can be selected according to your own needs to control the cost of decoration.

The original light-body wall is removed and replaced with a transparent glass wall, which expands the visual area of the space and also saves costs.

 

Mosaic paving requires a high labor cost, so you can find a large mosaic-like wall tile to pave the wall, which can save a lot of money. Since there are fewer gaps between large-size mosaic tiles, the amount of caulking agent is correspondingly reduced, which is often used for reference and selection in home decoration.

 

2) The floor area should be beautiful and non-slip.

Safety should be placed in the most important position, and slip resistance should be considered in the selection of floor tiles. At the same time, the human body will directly touch the ground, so the quality of materials should be paid attention to. Bright floor tiles are relatively slippery, so use them as little as possible in the bathroom, and use matte floor tiles or tiles with good anti-slip properties.

 

When paving the floor tiles, the slope must be appropriate, and the floor drain must be the lowest point so that the water can flow smoothly. The floor tiles should be made of whole tiles as much as possible, and the gap between the tiles should be controlled at about 2mm.

 

The area of decorative tiles on the ground is smaller than that of the wall. The use of interval paving can save the budget, and only use the same pattern of tiles to be separated by more than one tile.

 

If you want to create a low-cost bathroom with a natural texture, you can use wood-grain tiles instead of waterproof solid wood, which also has the characteristics of natural patterns, elegant colors, and easier matching with other sanitary wares.

 

Paving decal tiles in the bathroom can improve the monotonous bathroom style. In the actual construction process, the cost of laying decal tiles is much cheaper than mosaic.

 

When special-shaped handmade tiles are laid on the ground, they should be from the inside out, the gap between the tiles should be controlled within 8mm, and the height of the caulking agent should be level with the tiles. The paving of this kind of tiles should be carried out in sequence according to the serial number on the back to avoid waste caused by rework.

 

3) Cleverly arrange the exposed and concealed sanitary ware. 

The bathroom is a place where multiple channels of water and electricity converge. In the early stage of renovation, it is necessary to choose quality water pipes, wires, etc. And the wiring must comply with the regulations to avoid water leakage due to design and material selection problems.

As the space expands and functions increase, there are more and more electrical appliances in the bathroom. If you want to install smart toilet lids, integral shower rooms, massage bathtubs, multi-functional bathroom cabinets, etc., you must first make the sockets during the decoration to avoid rewiring in the future and increase the trouble.

 

The plumbing renovation of the bathroom is most laborious. If you want to save this part of the cost, the pipeline must be open-lined, without slotting, and future maintenance can also save a lot of costs.

In addition, avoid excessive wiring when rebuilding waterways and circuits. Use multi-hole sockets as much as possible on the panel of the socket. Under the premise of the same number of wires, you can plug in more electrical appliances. The wiring of the space is reconstructed with open wires, and the wires are routed from the top. The outer wall of the pipe is painted with waterproof paint, which saves a lot of labor costs and is also convenient for maintenance.

 

The bathrooms are uniformly decorated in black and white tones, simple and generous. The upper and lower water pipes of the sanitary ware are made of metal material, which has a long service life and is not easy to be damaged.

 

The space matching has been cleverly designed. The cement wall is matched with solid wood floor tiles, which is elegant and warm, satisfying practical functions and beautiful.

 

4) Shower Area

The quality of the glass used in the shower room is closely related to the safety of the bathroom. Fine tempered glass is generally difficult to break, and it will not hurt people when broken. Therefore, when choosing, don't be greedy for temporary cheapness, and try to choose high-quality, well-reputed brands.

The frame of the shower room is usually made of aluminum alloy, and the surface is sprayed with plastic, so it is not corroded or rusty. The thickness of the main frame aluminum alloy is preferably 1.1mm or more, which is not easy to deform.

 

In addition to professional brand shower rooms, the shower area can also be separated from dry and wet areas with various partitions. Common glass partitions only need to be installed on one side when combined with the wall, which saves costs by using less materials.

At the same time, the installation of the shower room can be omitted. The base of the shower room mainly plays the role of heat preservation and drainage, and the material is mostly acrylic.

 

The shower area is separated by a glass wall, and the ground is transitioned by steps to create a semi-enclosed shower space. The glass partition is directly fixed with hardware without reaching the top, which gives the space better permeability.

 

A wall serves as a partition, separating the wash area from the shower area. The interior of the wash area is covered with ceramic tiles, the exterior is painted with waterproof paint, and the key parts are strengthened.

 

5) Wash Area 

The floor drain is most commonly used for sink, and the wall mount type can be used for more advanced spaces. It is best to have all S-bends to prevent upward odor. Basins are divided into above-counter basins, under-counter basins and wall-mounted basins. Above counter basins for households are more suitable and easy to install. The under counter basin is suitable for a large area bathroom, and the installation is relatively complicated.

 

Small-space or low-budget families can abandon the overall bathroom cabinet, and use a transparent iron frame to save space and leave more space for the legs. Mirror cabinets and recessed cabinets are more suitable for small spaces and complete the storage function of the bathroom. To reduce the cost of decoration, you can choose a single color and simple style in the decoration, and match it with retro copper-colored, metal-colored faucets or mirror lights to create highlights.

 

Build the washstand with cement, and place storage baskets underneath. The wall-mounted faucet is highly decorative, but the size must be measured accurately in advance, otherwise it cannot be installed, which will affect the use.

 

There is no special furniture under the basin; only metal racks are used to save costs and place toiletries.

 

Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We have rich experience and passion in bath and kitchen industry and appreciate your contacting and business. Look forward to cooperating with you. Thanks a lot!

Towel bar: Towel bar is used to hang towels. The installation position is generally a position closer to the bath, and the installation height is generally 1.4 to 1.6 meters from the ground. The installation height should not be too low, otherwise the towel will get wet when bathing. The installation methods of the towel bar can be summarized into two types, one is to install without punching and the other is to install with emptying. Hole-free installation methods generally include vacuum suction cup type and watering type. Screws are generally used for drilling holes. Nowadays, many families prefer the non-punch vacuum suction cup installation, because it is easy to install, fast, and does not require much effort when disassembling. It does not cause any damage to the wall, but after a long time, it is easier to loose and fall off.  The fixing force is not as strong as screwing. The watering type, as the name implies, is fixed on the wall with nail-free glue. It takes more time to install, but the cost savings are better than others.

Towel rack: The towel rack is used to place bath towels. The installation location is next to the towel bar or in an open position in the bathroom. You can design the installation location according to the characteristics of your own bathroom. The length and width of the bath towel are several times that of the towel. The height of the installation is naturally higher than that of the towel bar, but it mainly depends on the average height of the family members.

Toilet paper holder: The toilet paper holder is used to place toilet paper. It is generally installed next to the toilet. The installation position should be lower than the toilet. If it is installed higher than the toilet, you can imagine how inconvenient it is.

Toilet brush holder: The toilet brush is generally installed next to the toilet, and it is recommended not to install it next to the toilet paper holder. The toilet brush usually contains bacteria when cleaning the toilet, and then the air around the toilet brush has many bacteria, and the bacteria are easy to adhere to the paper towel.

Storage basket: The storage basket is generally installed near the shower, and is used to place items such as shower gel and shampoo for easy bathing. The installation height is generally one meter two to one meter four. These are just for reference, and are of no practical use. You can design according to your own habits and believe in yourself.

Clothes hook: The characteristics of stainless steel clothes hooks are reflected in high temperature and low temperature resistance according to physical properties, and corrosion resistance and not easy to rust according to chemical properties. They are expensive and expensive, and are suitable for bathroom use. Space aluminum clothes hooks are characterized by not easy to fade, good environmental performance, not easy to rust, and easy to dye. The clothes hooks made of space aluminum materials on the market are rich in colors, strong in decoration, and low in price. The disadvantage is that the pressure resistance is weak. Not suitable for hanging heavy objects, suitable for various places. The copper clothes hook itself has high material density and good stability, so it is not easy to rust, resists pressure and is heavy, and is more expensive in the market. It is suitable for kitchens, living rooms and other places. Aluminum alloy is made of pure aluminum with some alloying elements, so aluminum alloy hooks are slightly better than space aluminum hooks in terms of performance. Zinc alloy is an alloy formed by adding other elements based on zinc, so zinc alloy clothes hooks are characterized by good manufacturability, long use time and easy cleaning. Wooden clothes hooks have low immunity to humid environments, poor physical properties, but strong decoration, suitable for living rooms, bedrooms, study rooms and other locations. Plastic clothes hooks are easy to mold, so most of the plastic clothes hooks on the market are not only highly decorative but also low-cost. The disadvantage is that the surface is not resistant to dirt and it is inconvenient to clean.

When we buy, we must consider the actual situation at home. Choose the right size and the required rack. Don't buy the package blindly. Some things may not be useful.

 

What kind of faucet is good?

 

Is it expensive? Seriously, price is one aspect of course. We must also consider these:

 

1. Faucet Cartridge

Cartridge is the heart of the faucet. According to the material, there are ceramic cartridges, stainless steel cartridges, and brass cartridges available on the market.

 

After the faucet has been used a long time, there may be a dripping problem. We may think the handle is not closed tightly or the handle is loose. In fact, the problem is often not the handle, but the cartridge hidden inside is beginning to age. The quality of the cartridge is a decisive factor affecting the service life of the faucet.

 

Ceramic cartridge is currently the mainstream cartridge on the market. It is wear-resistant, high-temperature and aging resistant, not easy to rust, good sealing, long service life, and less water pollution. Stainless steel and brass cartridges are also good choices. But bad brass and stainless steel materials are easy to rust, accumulate scale and affect water quality.

The Aquacubic cartridge is of higher quality than ordinary cartridges. It is made of ceramic and is integrally sealed with glue. It can adapt to various environments to ensure that the faucet will never leak under any severe conditions. It is durable, energy-saving and environmentally friendly.

 

 

2. Surface Coating

The surface coating is related to the corrosion resistance of the surface of the faucet.

In this regard, the electroplating corrosion resistance test in China is divided into 1-10 grades, and the tenth grade is the best. Aquacubic faucet can pass 24-hour acid salt spray test. The surface treatment reaches the highest tenth level. The surface should be smooth, and there is no uneven rough feeling. And it is corrosion resistant. 

Of course, if you want a better coating, you can choose anti-fingerprint brushed nickel finish. Through a special process, the surface of the faucet is not easily stained with fingerprint. The best choice for cleaning enthusiasts.

 

 

3. Main Material

The main material is the main part of the water flowing through. 

If the main material is not good, it will affect the quality of the water we drink! Two materials, brass and stainless steel, are more common on the market. It is worth noting that 59 brass is relatively high-quality brass material. Inferior brass may cause water pollution. Aquacubic faucet body uses 59 brass. In order to let customers use healthy water, we use low lead brass to minimize the precipitation of harmful substances in waterways and remove harmful heavy metals. Drink healthily and rest assured.

32" Decorative Lip Double Bowl Fireclay Farmhouse Kitchen Sink, White by Alfi Trade

Allyn Transitional Pull Down Bridge Faucet With Accessories by Kraus From

33 Undermount Kitchen Sink - Sarlai 33" x 19" Undermount Sink Ledge Workstation Deep …

Solid Stainless Steel Bridge Faucet, a swivel Spout, Pull Down Spray Head by Whitehaus …

Jokari 30900 Allrounder Round

Pot Filler Faucet High Brass Pot Filler Tap Wall Mounted Kitchen Faucet Single Cold And Hole Tap Rotation Folding Spout Black Chrome Nickel Golden for Kitchen Sink

If you are unable to visit us in-store, The Sink Warehouse also offers fast Australia-wide delivery and click-and-collect options! For all related bathroom basin product enquiries, please contact our customer support team by

Top 3 Markets: North America 40%, Domestic Market 20%, Western Europe 20% Tags: Pull Down Kitchen Faucet| Kitchen Design Kitchen Faucet| Taps Kitchen Faucets Supplier| Taps …