In China some people say that the struggle in the big city is so hard. Why not go to work in a small town? Is it worth struggling to afford a small apartment for a lifetime? I believe many people will find it worthwhile, because in big cities there are opportunities that cannot be found in small towns. The small apartment is not terrible. We can remodel it. As long as we have a dream, everything is possible. The owner Mr. Zhang who lives in Shanghai, like most ordinary citizens, worked hard all the way from the small hometown and finally settled in Shanghai and bought an apartment of 70 square meters. After having a child, Mr. Zhang took his parents from his hometown. A family of 5 squeezed into a small apartment. There was only one bathroom. Every morning and every evening, they were faced with taking turns to line up to take a bath and wash. They had no patience after some time. So he thought about making another shower room, and he can make the most of the balcony. Looking at the balcony that costs him a lot, only used to pile debris and dry clothes, Mr. Zhang felt it was a pity. He had heard of a case of transforming a balcony into a shower room before, so he wondered why not give it a try. If it fails, it will be dismantled after all. After talking to his wife, Mr. Zhang started serious research. After careful study, he summarized the following points to note:
First of all, it must be waterproof. Due to the special location of the balcony, the back may be the living room or bedroom. Considering that moisture may cause mold and peeling on the back wall, it is recommended that the waterproof layer of the wall where the shower is installed is painted as high as possible. The waterproof coating is generally brushed 2~3 times.
Second, make sure that the ground has a slope. The ground also needs to be waterproofed, and it is also necessary to ensure that the ground has a certain slope so that the sewage from the bath is discharged to the drain and will not flow back to the living room or other places.
Third, strengthen heat preservation. There is a big difference between the balcony shower room and the indoor shower room. Generally, the indoor shower room has only one wall with windows, and it can be kept warm by installing a heating system.
Finally, pay attention to the issue of privacy.
After studying how to install it, the next step is to choose a good shower room. Which products can meet this special demand? Because the balcony shower room is unavoidable from the wind and sun, we must pay attention to its material and anti-rust, anti-corrosion, and anti-fading ability. At the same time, pay attention to whether the frame is strong and stable, and the wall of the shower room must be strong.
After comparison, Mr. Zhang finally chose this shower room. This shower room is based on apartment space. The large apartment frame glass curtain wall, angular and cylindrical surfaces make the entire bathroom space richer.
At the same time, automotive-grade toughened glass has a thickness of 10MM, can withstand 700° high temperature, and has a high strength about 5 times that of ordinary glass, with outstanding impact resistance and thermal stability. In addition, EPM steel mold protection is added, so you don't have to worry about the risk of glass bursting. Even if it breaks, it will still stick to the debris to prevent the glass from splashing and hurting people. You can take a shower without restraint.
The door frame, handle and hinge outside the main body of the shower room are all made of high-quality aluminum alloy, and the surface should also be treated with anti-corrosion, anti-rust and anti-oxidation. In this way, there will be no signs of paint falling off after being exposed to the wind and sun on the balcony, and the structure is relatively strong and not prone to deformation.
In addition, the shower room is installed on the balcony. We will most worry about water will flow everywhere. This shower room has a overflow channel and magnetic tape, which can lock the water in all directions. Don't need to worry about getting the living room wet.
Buying a new bathroom sink faucet can be a challenging task. You have to consider many factors, such as installation, types, and finishes.
Also, a wide variety of brands and faucets are available. The bathroom sink is a vital fixture, so selecting the correct faucet is essential.
Here are the steps for how to choose a faucet for your bathroom sink.
3 Tips on Choosing a Faucet
If you want to switch from two handles to one, you have to think about the number of holes in the sink.
Most sinks have three holes: one for the hot handle, one for the cold and one under the spout.
Some single-handle faucets include a cover plate to hide the extra holes. But some don't, so check the label.
If you currently have a “wide spread” bathroom faucet with two handles far from the spout,
you can’t switch to a single-handle model.
2. Faucet Types
Ⅰ. Single-hole faucets combine the spout and mixing handles—often a single lever—into one unit that requires only one drilled sink hole.
For retrofits, some models include a bottom plate that will cover existing three-hole openings. Single-hole faucets are ideal for smaller sinks,
such as powder room baths. Their simplicity reflects modern sensibilities.
Ⅱ. Center-set faucets fit standard three-hole sinks (with outer holes drilled 4 inches apart). They'll have either a single lever or
two handles mounted on a 6-inch plate. They're ideal for most bathroom sinks.
Ⅲ. Widespread mounts have three separate pieces: Two handles and the spout.
The standard distance between the handles is at least 8 inches, and the three pieces tend to be larger than other types of bath faucets.
Smaller versions, called minispreads, are designed for standard holes drilled 4 inches apart.
Ⅵ. Wall mount faucets have gained popularity along with freestanding or vessel-type sinks that require longer spouts
that extend well over the top of the bowl. Not every faucet fixture can be easily categorized. Kohler, for example,
makes a faucet that's integrated into a mirrored wall cabinet.
All you see is the tiny flow control lever peeking out from the bottom of your mirrored self.
3. Faucet Finishes
Choose a finish that matches nearby cabinet hardware, towel bars, etc. Mismatches look bad. If you plan to replace existing hardware,
your choice of faucet finishes is wide open. The vast majority of faucets have polished chrome, satin nickel or bronze finishes.
All of these finishes are durable and keep their good looks for years. But some are more durable than others.
Chrome is the most durable finish and the easiest to keep clean-that's why it's always been the favorite
for commercial kitchens and public bathrooms. If your faucet gets heavy use, it's your best bet for long-term toughness.
Nickel finishes are usually labeled “brushed,” “satin” or “stainless steel” and have a dull shine.
They're durable but prone to fingerprints and water spots, so they're harder to keep clean.
Some have a coating that reduces stains and smudges, but that coating isn't as durable as metal and may chip or wear.
Bronze faucets have a brownish tone and are often called “oiled” or “rubbed” bronze.
But the surface is a coating (such as epoxy) rather than metal.
This coating is tough stuff, but can be chipped or scratched more easily than metal.
The sink must be installed in the bathroom? Take a look at these locations that may be more suitable for sinks in your new home!
As a patient with lazy cancer, where to put the sink determines how many steps I have to take to wash my hands. Do I have to go to the bathroom after eating snacks and watching a drama at night, and getting up to wash my hands? Can't the sink be placed at the door? Put it under my nose? Or even in the balcony close to me? The answer is yes.
01. Where should the sink be moved out of the bathroom?
In order to make it easier for you to use, we will give you a few common places to put the sink. It can be installed in the hallway. There may be few people who think of this, but it is very common in Japan. As long as space permits, they will find a way to add a sink near the hallway so that they can wash their hands as soon as they enter the house. In addition, the sink can also be used as a partition of the entrance, so that even the entrance hall is made.
Put the sink on the aisle at the entrance of the bathroom. In this way, the dry and wet separations can be easily realized. Because the washbasin only occupies a small area, the total space will not become small.
If you are worried that the total appearance will be affected by putting it outside, and later storage can not be done well and it is messy, you can directly weaken it visually during the renovation by adding a wall to enclose it.
Wooden fences or glass can also be used as partitions, and cabinets can be used for storage on top.
The glass partition can prevent water from splashing everywhere when washing hands, and keep the space visually transparent.
If there is a gap between two rooms, you may consider putting the sink here. Such as between two bedrooms, between the kitchen and the bathroom, etc.
The advantage of this is that it can make full use of the space and avoid the waste of repeated settings. At the same time, it can also have the function of dividing space. It can also be installed on the balcony. Modern people spend most of their time in the living room. If you put the sink on the balcony closest to the living room, because there is plenty of light and the view is open, will you feel better when you wash your hands?
We can also put the washing machine next to it, throw the clothes in and wash them.
It is relatively rare to install on the dressing table. A dressing table can be placed in the bedroom to store all kinds of small things, and it can be combined with the sink. Sinks can be installed in the bathroom, outside the bathroom, or between the cloakroom and the bathroom.
According to our thoughts, these may seem strange, but starting from the owner’s living habits, it seems to be a reasonable design. Tip: The disadvantage of placing the sink outside the bathroom is the laying of water and sewage and waterproofing. Need to discuss with construction workers in advance and implement as required. Waterproofing should also be done well. It is recommended to follow the waterproof standard of the dry area of the bathroom, and apply waterproof paint at least 30cm high on the wall near the sink and on the floor. Secondly, there is no door to block the washbasin outside. If the storage is not done properly, the messy scene will be directly exposed. Therefore, the corresponding storage function must be done well, and the choice of towels even become stricter. Otherwise sit in the living room and see a messy washing area.
02. An easy-to-use sink can be like this.
In addition to moving the washbasin, its appearance and comfort should also keep up. You need to know the following knowledge. The style of the washbasin: Above counter basin and under counter basin. Above counter basin has a super good looking. In addition to square, round, oval, there may be other petal shapes to choose from. Generally they can be matched with high body faucets.
The under-counter basin is installed under the countertop and glued to the countertop from bottom to top. The advantage is that it is very convenient to clean the countertop. It is very common to have water on the countertop, you can easily wipe the water into the basin. It is more convenient to have a mirror cabinet, and the storage capacity can be improved a lot. Some mirror cabinets are fully enclosed, and some are partially open for storage. What kind of mirror cabinet to choose depends on your living habits.
Light is a top requirement for looking in a mirror. Most people may only install a mirror headlight above the mirror. In fact, the best way is to set up lights on the left and right sides of the mirror, which is about one person wide. Many professional dressing tables are set up in this way.
Double Basin Design
The double basin design can improve life efficiency. For example, a family of four has to go to school and work at the same time. And two people washing together is also very warm. Of course, double basins may only be suitable for large bathroom space.
It can be a basin or not. An artistic design. For example, in a retro-style home, try a bicycle wash basin.
There are also a few stacked stones. Is there a trace of natural "spring" style when the water runs out from the stone?
If you like minimalist style, consider this transparent glass wash basin.
If you want to realize the separation of dry and wet, but in the small area of the bathroom it cannot be realized, the above method can be considered. It is indeed completely reasonable and feasible to move the sink out.
If not to consider the faucet valve core and aerator, lead-free brass faucet and general faucet mainly differ in the material and technology.
Ⅰ. Raw Materials
The main raw material of lead-free brass faucet is made of international standard H59 and H62 copper. The casting adopts steel mold for gravity casting with uniform faucet wall thickness of 2.2-3.0 mm.
The main reason for using brass is the antibacterial activity. This can prevent bacteria from growing on the inner wall of the faucet, which is an advantage that other materials (such as stainless steel and plastic) do not have.
Ⅱ. Surface Technology
Surface treatment is very important for lead-free faucet, which is related to the service life, finish and wear resistance of the faucet. High quality faucet surface electroplating is usually mirror effect. It can eliminate secondary water pollution and ensure water safety.
How to judge the quality of the surface treatment of a faucet?
It can be easily judged by the following 3 points:
1. A good faucet will have a moisturizing and shiny surface, while a poor quality will have a dim gloss;
2. A good faucet will have a flat surface, while a poor quality faucet will have a wave surface, even a dent.
3. Good faucets are more wear-resistant, and there are no scratches, but inferior products will have dense scratches on the surface.
Generally, the surface coating of high-quality brass faucet has only 2 layers, and the product can pass 48 hours neutral and 24 hours acid salt spray test.
Ⅲ. Production Process
The production process of faucet is generally the following 16 steps:
copper ingot - dissolution - casting - cleaning after casting - casting inspection - machining - tolerance inspection - grinding - surface inspection - electroplating - electroplating inspection - assembly - pressure test - finished product inspection - packaging - delivery.
Each process has strict requirements for the production process.
The difference of faucet material selection and production technology determines that the price of lead-free brass faucet is generally higher than stainless steel and plastic faucets.
Although the bathroom is small, it is a very important part of the decoration and is closely related to our lives. Everyday life starts here and ends here; if the decoration is not good, it can drive you crazy every day. The toilet is broken, the shower is blocked, and so on.
In the process of using the bathroom, some problems are always prone to occur. Therefore, when decorating the bathroom, it is necessary to control all aspects of the details in order to avoid the impact of daily life as much as possible.
Four Matters Needing Attention in Bathroom Decoration
1. Spare more power sockets and water outlets
Many people often forget to spare more power sockets and waterways during bathroom decoration. Changing smart toilets and heated towel rails in the later period will easily cause inconvenience.
2. The problem of wall and floor tiles
Before laying the floor tiles, do a water leakage experiment for at least 24 hours. Go downstairs to see if there are any signs of water leakage. The floor tiles are aligned with the wall tiles. When laying the floor tiles, ensure that the brick surface has a slope of about 1°towards the floor drain.
3. Separate dry and wet spaces
If the bathroom does not separate from wet and dry, it is easy to cause the water in the shower to splash everywhere. Easy to slip and fall. It is not conducive to cleaning and can not keep the bathroom dry.
4. The problem of replacing ordinary toilets with smart toilets.
When installing an ordinary toilet, users generally did not consider the subsequent transformation of the water circuit, and did not spare a strong electric power supply, socket and water circuit in the toilet position. It will be more difficult to use a smart toilet in the future. The pit distance should also be considered when installing the toilet.
Six FAQ about Bathroom Decoration
1. Which is more practical, shower room or bathtub?
In general, the shower room should be more practical than the bathtub. The shower is timely, convenient and practical, and relatively hygienic. For ordinary families, many people use it only once a year after the bathtub is installed. Most of them are used to soak clothes and curtains.
2. Is the shower curtain easy to use?
For small apartments, the area of the bathroom is relatively small. Glass partitions can make the already small bathroom appear more crowded. If the shower curtain is used as a partition, the entire space becomes much more spacious after unfolding. The shower curtain can also realize the function of separating dry and wet, preventing water from splashing out of the shower.
3. Choose mosaic for bathroom decoration, or is pure black and white more practical?
Mosaic decoration effect is good, but the material price and labor cost are more expensive. If you want to install a towel bar or shelf where the mosaic is used, you can only choose to use the expansion screw method, and it is more difficult to use the suction cup type. Mosaic is not easy to take care of, and it is easy to hide dirt. So try to use it in dry areas.
4. How to choose above counter basin and under counter basin?
The above counter basins have many shapes, large choices and ideal decoration effects. The installation is simple and convenient, and the maintenance is convenient in the future. If it breaks, remove the glue and pick it up directly from the countertop to repair it. However, when using the above counter basin, the water is easy to splash outside. You have to wipe the countertop after washing your face. The key is that there are dead spots that are difficult to wipe. For people who do not have a laundry balcony and like to wash their clothes by hand, it is recommended to choose a larger and deeper basin. Washing your face is the next thing, and you have to have a place to wash your clothes.
The under-counter basin is embedded in the middle of the countertop, which is more beautiful than the above-counter basin, and the basin surface is lower than the countertop. Water on the countertop can be easily poured or wiped into the basin, which makes it more hygienic.
5. How to install floor drain and socket ?
The location of the floor drain needs to be carefully considered, preferably on one side of the floor. If it is in the middle of the bathroom, the floor drain will not be the lowest point no matter how the tiles are inclined. Setting up well the location of the floor drain can avoid the problem of water accumulation.
The socket should be designed with a switch, especially the socket of the electric water heater should be equipped with a switch. You also need to spare a few more next to the sink to charge the common appliances such as hair dryers, razors, and electric toothbrushes. Electricity safety has never been a small issue, so special attention must be paid!
6. Why install the bathroom exhaust fan ?
The bathroom at home is relatively humid, which can easily breed bacteria, which affects our health. So everyone will install an exhaust fan in the bathroom, which solves the problem of damp space and keeps the bathroom fresh air at the same time.
The kitchen sink is a kitchen ware that every family must have. Because the sink is used most frequently in the kitchen, the kitchen sink must be installed carefully in order to avoid some troubles when using the sink later.
The installation of the kitchen sink is not a major project, but you must pay attention to the details. If you want to rework, it will involve cabinets and countertops, and the workload is huge.
When the kitchen sink is actually installed, although it can be placed in the final process of the kitchen, it needs to be considered when designing the cabinets at the beginning. The cabinet design should leave a space for the sink, at least to ensure that the sink can be installed. Also, when making the countertop, an approximate size of the sink must be provided to facilitate the opening of the countertop. Of course, it is best to have a specific drawing size. Then tell the workers who make the countertops, which way you want to install the sink, above counter, farmhouse, or under counter? Because the hole size of each installation method is a little different.
The following introduces some basic processes and details of the kitchen sink installation, so that you can know what should be paid attention to when checking.
1) When the sink is installed, the faucet and the water pipe are usually installed at the same time. The current faucets are generally hot and cold, so you have to connect the hot and cold water pipes, and don't get confused.
2) After the faucet is installed, connect the drain set. The overflow hole pipe and the downhole pipe are directly connected. If you need to connect the waste water pipe of the dishwasher or water purifier, you can first connect a tee to the drain pipe of the sink. All joints must be kept tightly sealed, otherwise there will be problems such as water leakage and water seepage.
3) If the sink is equipped with an installation buckle, it is necessary to fasten the installation buckle to prevent displacement and unevenness of the sink.
4) After the sink is installed, a leak and drainage test should be done. The method of testing is to fill the sink with water and see if there is any leak in the tank. Because the quality of some sinks is not good enough, there will be blisters, cracks and other reasons on the finished product that cause the sink to leak. If there is no leak, open the drain and let the sink perform a drain test. When draining, pay attention to whether there is water leakage at each interface of the sewer pipe, whether the tank drains smoothly, and whether there are too many residual water marks.
5) After doing a series of tests, if there is no problem, the edges around the sink can be sealed. Applying waterproof glue, and doing some beautification work in the follow-up. Now we have basically completed the entire installation of the sink.
During the entire installation process of the sink, the most important thing is to pay attention to the tightness. Pay attention to the contact position of the sink and the countertop or the junction of the water pipe. So as not to cause water leakage. After the sink is installed, most houses are still in the process of renovation. So keep the sink tidy and clean, and try not to expose it. Too much dust and debris will fall in the sink during decoration. If it is not cleaned up in time for a long time, it may cause problems such as watermarks and rust in the sink.
So after installing the sink, clean the sink, try to wipe off the water stains, and then cover it with a plastic cloth. When you check in later, you can open it and clean it up again. Basically, it can avoid watermarks and rust in the sink after moving in.
Aquacubic provides "Quality Bath & Kitchen Solution" to our customers.
Quality is always the first priority of Aquacubic. We understand the importance of quality to our clients, and quality is the foundation for long -term cooperation. To deliver high quality products, we established the whole quality system from raw materials checking to mass production audit and final products inspection. Most of our products are CE and CUPC certified.
Cooperating with Aquacubic is cost saving. Aquacubic make great investment in machines to increase production efficiency. Thanks to long existence in the industry and good relationship with material suppliers, Aquacubic has good cost control system and bargain power, to ensure competitive pricing for our customers.
Once you contact with Aquacubic, you will find yourself are in service of a hardworking, reliable, sincere team with good communication skills. Our associates also provide value-added service for design, test report, shipment arranging, freight cost control and so on.
Bathroom faucet brings a modern style to any bathroom setup. Daily washing task is made easier by the classic one-handle lever design of this faucet, which offers effortless control of the steady and clear waterstream. H and C markings help guests easily control water temperature for a better experience.
Nano kitchen sinks will still look brand new even after years of usage. The smooth coating is more resistant to scratches compared to other sink materials present in the market right now. You can also use it to give your pet a lovely bath. No worry about scratch, Your pets will never scratch the tub.
The handmade wokstation stainless steel undermount sink is revolutionary to say the least. With a unique corner design, you get all of the beauty of a designer stainless steel sink while meeting your every day kitchen needs. It is as functional as it is fabulous. It's seriously the best of both worlds. Created with premium stainless steel, this hardworking sink with a ledge features placing various accessories on it for prep cooking easily.
Aquacubic has rich experience and passion in bath and kitchen industry and appreciate for your contacting and business.
Ceramic sink is a kind of household goods. There are many kinds of sink materials, such as cast iron enamel, ceramics,
steel plate enamel, artificial stone, acrylic, crystal stone flume, etc. Most bathroom sinks are made from firecaly.
Ceramic sink is a kind of water sink which is made by integrated molding and firing. Its main body is mainly white.
It has the advantages of high temperature resistance, easy cleaning and aging resistance.
It can be wiped clean with cloth or clean metal ball in daily cleaning.
Step Ⅰ. Grouting
The production of ceramic sink is generally made by grouting.
The slurry is poured into a fixed die and allowed to solidify.
Step Ⅱ. Spraying Glaze
It is necessary to prepare qualified glaze slurry. Spray it on the surface of sink body.
Vitrify it into porcelain after firing; cover it on the surface.
Step Ⅲ. Forming
Forming is a drying process.
The process of further dehydration of semi-finished products.
Step Ⅳ. Preparation for Furnace
This is an important step before burning.
Workers need to check the surface & quality of the sinks and lay them together in trolley.
Step Ⅴ. Burning
Put the products on the kiln car according to certain proportion.
Based on the given temperature curve, sink will form finally.
Step Ⅵ. Storage & Logistic
With the development of storage & logistics industry,
we developed a complete solution for big size cargos.