This article introduces the three main components of the faucet. It will help you to understand the quality and material of faucets we use everyday. Uncover all the mysteries of the faucet.
Part 1: Composition
The three most basic components of a faucet: main body, plating and cartridge.
01 Main Body
The main body is the torso part of the faucet. The water flows in and out of the main body all the time. So the material is important. It determines the water quality.
Copper Alloy Faucet
Copper alloy is currently recognized as the most suitable main material for home use faucet, and the mainstream is brass. On the one hand, copper has good machinability, fluidity and formability. On the other hand, because copper ions have a bactericidal effect, they can kill super bacteria such as MRSA within 30 minutes and prevent the bacteria from producing antibodies. The inner wall of the copper faucet will not breed bacteria and become the most suitable carrier for "water".
According to different proportions of copper content in copper alloys, copper alloy materials can be divided into 52, 55, 59 and 62 copper. Among them, 59 copper is the best. The content of copper metal is 58%-60%, the content of lead metal is 0.08%-0.2%, and the content of other elements is about 2%. The remaining metal is basically zinc.
Because lead metal will precipitate when water enters the faucet, it will pollute the water. If the lead content is too high, it is harmful to the human body. Therefore, some brand faucets use low-lead copper, that is, the lead content is less than 0.1%. In view of the fact that it is difficult for general consumers to judge the lead content, it is recommended to choose a faucet with a clear mark that uses low-lead copper.
Zinc Alloy Faucet
Zinc alloy is an alloy based on zinc and added with other elements such as aluminum, copper, magnesium, cadmium, lead, and titanium. Zinc alloy is easily corroded in water. After being corroded, the metal will be mixed into the water and cause harm to the human body. The biggest advantage is probably the low price.
Stainless Steel Faucet
The main components of steel are iron and carbon. Ordinary carbon steel is easy to rust. Adding chromium, nickel and other metals to carbon steel can make the steel corrosion resistant. Therefore, the most important factor affecting the corrosion resistance of stainless steel is the content of chromium.
Stainless steel has the advantages of acid resistance, alkali resistance, corrosion resistance, and no release of harmful substances (lead). But compared with copper, it has one of the biggest drawbacks, that is, it does not have antibacterial function.
If the budget is sufficient, choose low-lead copper faucets. If you can't identify whether it is low-lead copper, choose a product from a big brand.
If you have a small budget, you can choose stainless steel faucets. The price will be cheaper. However, relatively there will be some problems. In particular, we must choose products from high standard manufacturers. After all, it's about your own health, don't be greedy for cheap.
The faucet is used in a humid environment, and its surface requires a good finish. The common surface treatment method on the market is electroplating, mainly including chrome plating, nickel plating, titanium plating and so on. In addition, there are some rarer methods such as baking varnish, porcelain, and imitation gold electrophoretic paint.
Chrome plating is the most common faucet plating. Chromium is a white metal with a bluish color, which has high hardness and wear resistance. Its hardness exceeds even the hardest quenched steel, second only to diamond.
Chromium is not easy to change in a humid environment and can maintain the surface gloss for a long time. With a silver appearance, chrome-plated faucets are more popular with consumers.
Nickel can quickly form a very thin passivation film on the surface of the faucet. Can resist the corrosion of water vapor and certain acids. Has excellent corrosion resistance and stability. Can resist the corrosion of water vapor and certain acids. Therefore, the stability of the nickel layer in a humid environment is very high.
Titanium alloys are made by adding aluminum and tin elements or aluminum and vanadium elements to titanium. Electroplated titanium gold has the advantages of high strength, low density, strong toughness and good corrosion resistance. The surface of the titanium-plated faucet is as smooth as a mirror. Its golden luster looks elegant and rich, and very decorative. However, the process of plating titanium gold is complicated. It is very easy to absorb impurities during thermal processing. Therefore, the yield is low. The cost is also higher.
Baking varnish is to put two layers of coating on the faucet. Each time the paint is applied, it is sent to a dust-free constant temperature baking paint room for electric heating or far-infrared high temperature baking.
The surface of the baking varnish faucet is smooth and shiny, which can present a visual texture similar to that of a piano, making the whole product look very high-grade. However, compared with other surface treatment methods, baking varnish faucets are more prone to surface peeling. The durability is not as good as the traditional chrome-plated faucet. This method is not widely used.
This treatment will make the surface of the faucet visually rough. However, it is quite delicate to the touch, showing a restrained beauty. The brushed process mainly relies on mechanical friction to produce several common textures such as straight lines, chaotic lines, threads, corrugations, swirling lines and intermittent silk lines on the surface of the faucet. It can also create matte, mirror, three-dimensional, embossed, satin and other effects.
Appropriate surface treatment can make the overall shape of the faucet rich and full. Choosing the right faucet can also become the finishing touch to the bathroom decoration. It is pleasing to the eye.
There are generally multiple layers of plating. There are also some cheap faucets that are only coated one layer. The coating is not as thick as possible, but just right. If the coating is too thin, it will not be able to prevent corrosion. If the coating is too thick, it is easy to peel off. Copper + nickel + chromium is best. Copper can provide excellent adhesion. Nickel makes the coating have excellent corrosion resistance. Chromium makes the surface bright and flawless, and it is hard and scratch-resistant. Further improving the corrosion resistance. In addition, the faucet that has passed the 48-hour professional salt spray test will be more guaranteed in terms of corrosion resistance. Aquacubic's products have passed these tests.
The cartridge is a part that realizes the basic functions of direction control, pressure control or flow control by means of the rotation of the valve stem. The water flow enters the main body of the faucet through the cartridge and finally leaves the water outlet. The faucet used at home is turned on and off countless times a day. It can be seen that the quality of the cartridge is also very important to the faucet.
The ceramic cartridge has less water pollution, good wear resistance and good sealing performance. Many high-quality faucets use ceramic cartridges. The ceramic chip must have good airtightness, stable physical properties, wear resistance, and long service life.
Stainless Steel Cartridge
The biggest advantage of the stainless steel cartridge is that it has a larger adjustable angle of rotation and is not easily affected by water quality. It is more practical to choose this type in areas with poor water quality. However, stainless steel has worse wear resistance compared to ceramic. After it is used for a long time, water leakage is prone to occur.
Roller cartridges are old-fashioned cartridges. No matter in terms of price, water pollution or life span, they are inferior to ceramics and have been phased out. There are very few roller cartridge faucets on the market.
Part 2: How to Buy ?
After understanding the most important parts of the faucet, let's take a look at the precautions when purchasing.
01 The Weight
Faucets made of brass are heavier. So you can make a preliminary judgment by weighing the faucet. However, many manufacturers can increase the weight of low-quality faucets through some methods. So here is a commonplace saying, for consumers who can't distinguish the material, it is better to choose the leading brands. This is the simplest selection method.
02 The Surface
In sufficient light, carefully observe the electroplated surface of the faucet. Good electroplating looks as bright as a mirror, without any oxidation spots and burn marks, no pores, no blistering, no plating leakage, no burrs to the touch. After pressing the faucet, the fingerprints will spread out quickly, and it is not easy to adhere to dirt.
Breathing out the surface of the faucet. For products with good electroplating quality, the water vapor will quickly and evenly fade away. If the quality is not good, the fading speed will be slower, or not fade. The faster and more even the water vapor fades, the better the quality.
03 After-sales Service
The after-sales service of the product is very important, and it is also the guarantee for you to have no worries. Be sure to buy products with good after-sales service. The general faucet is guaranteed for at least 5 years.
When choosing a faucet, the most important thing is to look at the material, plating and cartridge of the faucet. Because the material determines the safety of the water. The coating can increase the service life of the faucet, so that the faucet has scratch resistance, corrosion resistance, and the surface brightness will be better. The cartridge is the heart of the faucet. Generally high quality faucets use ceramic cartridges. It has the characteristics of strong wear resistance and good sealing performance.
The home is inseparable from the support of basic hardware. Don't underestimate the basic hardware. Their technological content and technical barriers are higher than you can imagine.
Of course, the difference in quality and price is even more surprising.
Basic hardware generally includes: hinges, damper, sliding rails, etc. Put it simple, all the hardware components that enable the cabinet and the pull basket to achieve the functions of opening, sliding, and staying.
The most used is the hinge. It not only needs to connect the cabinet body and the door panel accurately, but also bear the weight of the door panel alone. And all doors must be kept neatly arranged. Otherwise, it may loosen and fall after a period of time.
In the design of the entire drawer, the most important accessory is the sliding rail. Due to the special environment of the kitchen, even if the low-quality sliding rail feels good in the short term, it will be difficult to push and pull after a longer time.
The damper is matched with the sliding rail and the hinge. The damper has two most important functions. One is to improve the precision of the hardware, and the other is shock absorption.
Flip up Door Support: First of all, it is sturdy and has no shaking, the surface is smooth and the workmanship is fine. And it is smooth and quiet in use.
In addition, damper and rebound depend on whether the force is uniform, and if there is no load, test whether it can be smooth and quiet under load, and whether there is obvious friction and jamming.
Considering the frequency of use, be sure to choose a big brand. The good ones can last for decades, and the poor ones will have quality problems in three to five years.
Now we will introduce the international brands of kitchen hardware products and their characteristics.
GRASS of Austria is one of the largest hardware vendors in the world, focusing on the development of furniture hardware, just like their slogan: Let the opening and closing of furniture become the most comfortable experience.
Their products are mainly comfortable to use. The best product is the sliding rail system. Others include hinges and upturn supports.
Salice of Italy is a veritable king of hinges, and the world's first modern furniture hinge was made by them.
In the European high-end furniture market, it is in a "monopoly" position. The top cabinets in Germany and Italy almost all use Salice's hinges.
Expensive and good.
No need OEM service from other factories. 100% of the spare parts are all from Europe. Surface treatment and rich colors are also a major feature.
Hettich in Germany is like a furniture hardware store, with a multi-faceted product line, which is still a little different from the two above.
Many people think of them as expensive, solid materials and excellent performance.
Then there is Blum in Austria, which is more like a cabinet hardware store. The main product is hinges, which is still far from Salice. Most professional cabinet brands use Blum's hinges. Blum is the most well-known hinge company in China.
Finally, let us talk about the German KESSEBOHMER, which is smaller than the above ones. It focuses on the cabinet hardware. The design and craftsmanship are excellent. The selection of materials is strict and the workmanship is fine.
And there also is Hafele. Hafele is almost like an international distribution center for hardware accessories. The product line is rich, covering construction, furniture, cabinets and other fields. Most products are from global procurement and OEM factory. Hafele can be called Carrefour in the hardware industry.
The ranking of domestic hardware brands has changed considerably. The more famous ones are DTC and HIGOLD.
DTC mainly has a large output. The domestic output in China is the first. It is also among the best in the world. The main products are connectors, hinges and slide rails.
HIGOLD, the latecomer, takes the lead. Focusing on functional hardware. Product advantages are function and design.
We all dream of having a spacious bathroom, preferably a separate bathtub and shower, two sinks, and even a comfortable lounge chair to rest after bathing.
So, today we share with you 10 bathroom design principles. You can use some or all of these techniques to double your bathroom space.
01. Use White Color
One of the easiest ways to make a space look spacious is to use a lot of white: white tiles, white wall paint, white accessories, etc. White allows other colors to recede naturally, making the space look bigger. It can reflect any light instead of absorbing it.
The use of white is particularly effective in the bathroom. Since the bathtub, toilet and sink in the bathroom are basically white, the use of other white can make the space seamlessly connected, making the space transparent and creating a sense of expansion.
Using a lot of white does not mean pale and empty, lack of personality. Using different structural elements, such as light-colored stones or tiles with different textures, and a small amount of metal or wood intervention, can maintain a seamless appearance while also presenting the richness of the space.
02. Use Same Style Color
If you are not a fan of white, you can use warm beige, soft gray or even pink (pink blue, pink, etc.) to create a sense of spaciousness. Choose an elegant ceramic tile, and choose the matching color system for the rest of the wall. The overall effect is quiet and warm, and will not cause visual breaks and reduce your sense of space.
03. Use Floating Design
In a compact bathroom, balancing storage needs and a sense of spaciousness and freedom is a tricky issue. The suspended wash basin design is a good solution. It gives you a lot of space to store essentials. The empty space at the bottom is like an entrance and exit for air flow, which does not make people feel oppressed and tense.
04. Less is More
Less is more. If it is not necessary to have a large storage area, use small-sized wash basins to leave more open areas to make the space look bigger. If there is a bathtub next to the toilet, you need to leave enough space.
05. Use a mirror to enlarge the space.
A large enough mirror can double your space, especially in the bathroom. However, this kind of large mirror must be of good quality, and the size and thickness must be accurate, otherwise it will seriously affect the overall layout. A good mirror will have a very powerful effect, and you can make the room look perfect in just a few minutes.
06. Use Glass Doors
Another good way to expand the space is to use glass as a partition for the door or shower room. The visual extension makes the space look bigger. Especially in the shower.
If you are worried about privacy, you can use frosted or tinted glass, which can still achieve the effect of light transmission and will not make you feel cramped and depressed in the shower. If there is no special need, it is recommended to abandon the bathtub and install a shower room. The bathtub consumes a lot of valuable space, and the usage rate is extremely low.
07. Design a Suitable Alcove
Designing an open alcove in a suitable location can not only increase the storage space, but also increase the visual depth, making the wall look far beyond the real distance.
When designing alcove, you must communicate with professionals, because there will be many wires, pipelines, etc. in the wall of the bathroom.
08. Good Lighting
Good lighting is essential to make any space look bigger and more open, especially in bathrooms that don’t usually have much natural light. In addition, you also need good lighting in the bathroom to effectively perform shaving or makeup, so its importance does not need to be emphasized.
The key is to have a rich lighting scheme in the bathroom, and it is best to use multiple light sources in different locations. Ceiling lights (multiple bulbs can be used), or modern edge-lit mirrors will help you avoid shadows and make the space feel bright and open.
09. Create Long Lines
Whether your bathroom is typically rectangular or oddly shaped, you can always find a wall or area that is slightly longer than other places. Adding a shelf, a tile strip, or even a simple striped wall paint to these areas can help you lengthen the longest line in the room and draw the sight to the farthest position, giving the space a sense of extension.
10. Balance the Horizontal and Vertical Ratio
If your bathroom is already very long, narrow and tunnel-shaped, don't emphasize the length anymore, you must think more about stretching the width visually.
For example, in this long and narrow bathroom below, the tiles on the wall and the floor are laid in a horizontal splicing way, which invisibly increases the visual width, and the spatial balance becomes more harmonious.
Some faucets are used two or three years, and the water flow is intermittent or rusted into green. The handle is hard to be used for opening and closing. The size of the water flow depends on luck.
Some faucets have been used for 20 years, and the surface is still as smooth as new. The feel when adjusting the angle of the handle is still as silky as the chopsticks in a honey jar. The speed of the water flow are still adjusted as you like. So how can we pick a faucet that can last 20 or 30 years or more?
First, the kitchen faucet can be rotated 360°.
For ease of use, the kitchen faucet should be taller, and the spout should also be very long. It is best to extend above the drain and not splash water. If there is a hot water line in the kitchen, this type of faucet should also contain hot and cold hoses. In order to meet various needs, most of the kitchen faucets can rotate the body of the faucet left and right. The sprayer part of some faucet can be pulled out, which is convenient for cleaning to all corners of the sink.
Second, if the budget is enough, the material of stainless steel is preferred.
The material of kitchen faucet is generally brass, which is the most common faucet on the market. However. Due to the characteristics of the kitchen environment, pure brass faucets are not necessarily the best choice. All pure brass faucets have electroplating on the outermost layer, and the function of electroplating is to prevent corrosion and rust of the brass inside. There is a lot of oily smoke in the kitchen, and the greasy hands and cleaners on the hands when washing the dishes make it often necessary to clean the faucet. If you do not use the correct way to clean, it is likely to damage the electroplating layer of the faucet, causing the faucet to be corroded and rusted. If you want to choose an all-brass kitchen faucet, you must be sure to have excellent electroplating, otherwise it will easily cause the faucet to rust and corrode.
And now some manufacturers use high-quality 304 stainless steel to make faucets. Compared with pure brass faucets, faucets made of high-quality stainless steel are free of lead, acid, alkali, corrosion, and harmful substances, and will not pollute tap water. This is very important for drinking water in the kitchen; and the stainless steel faucet does not need electroplating, it is extremely difficult to rust, and the hardness and toughness are more than twice higher than that of brass products, so it is very convenient to clean. However, due to the high difficulty of stainless steel processing, the current high-quality stainless steel faucets are usually relatively expensive.
Third, pay attention to whether the length of the tap can clean the sinks on both sides.
When buying, pay attention to the length of the basin and the faucet sprayer. If it is a double sink, pay attention to whether the length of the faucet can clean the sinks on both sides when rotating. Most kitchen faucets can rotate the body of the faucet left and right, which is convenient for cleaning to all corners of the sink.
Ordinary sink, also known as drawn sink, is formed by pressing and stretching a whole piece of steel plate.
The principle is similar to balloon blowing, so the bottom and corner of the water sink will be thinned properly,
usually made of 0.8mm thick steel.
The Handmade Sink is not made piece by piece by hand, but made by cutting, bending and laser welding the steel plate.
Will not change the thickness of the steel plate in the corner, the sink is very sturdy and solid. Usually this thickness is 1.2-1.5mm.
The appearance has strong sense of line, and the weight is much heavier.
The small R angle of handmade sink is not only better in appearance, but also higher in the utilization of the whole sink space.
1. X Grooves Design
Optimized bottom slope makes kitchen sink draining faster than normal sinks. Gently sloped bottom, fast draining and dry after using.
Handmade X grooves design, not only increase the design aesthetic but also easy to drain water in a minute.
Rear set 3.5”drain matches most kitchen appliances and fits the most Common Garbage Disposal System and unlocks extra space.
2. Nano Surface Technology
Nano surface as Lotus leaf. Water and oil flow quickly and no trace left.
Hardness of Nano surface: ＞8H Hardness of regular surface: ＞4.5H
Extreme craftsmanship focuses on every detail of the sink. Meets the UPC, cUPC, CE certification standards.
3. POSCO 304 SUS Material
Durable scratch and stain resistant stainless steel surface helps the beauty last.
Real 16 / 18 gauge material; never chip or crack. Commercial grade satin finish. Thick 304 Stainless Steel construction.
9 - 10 inches deep large sink can hold a lot of pots and pans. Experience the luxury brought by the global high-end manufacturing industry.
4. Soundproof Pad - 7pcs
Extra-thick coating and thick sound rubber pad assure exceptional noise reduction.
Insulative padding can dramatically reduce the noise causing by water dripping,making an excellent effect on noise elimination.
It can enhance the elegance and high quality of the kitchen, and it will become the focus of your kitchen. The high quality of the sink is praised and recognized by the most demanding customers
According to the current fashion trend, the kitchen faucets of major brands are based on the hard strength (cartridge and material), They have also started to work together with their soft power (technical content, appearance design, etc.), so if you want to reach the level of one-step purchase, It is necessary to understand what the modern kitchen faucet looks like with both soft and hard strength. In a word, it can meet the daily practical functions of the kitchen, in line with the modern "everything is intelligent" home trend, but also have a bright appearance design.
1. Single Handle Faucet
The faucet is a hot and cold water mixer. Turn the handle to choose hot or cold water.
2. Double Handle Faucet
Water flow can be controlled separately for cold and hot water.
This is also called an 8 inch model.
3. Widespread Faucet
Two handles and water spout are separate from each other.
4. Touchless Sensor Faucet
No need to touch or turn the lever to make the faucet work.
Faucet can also be in manual or automatic mode.
5. Wall Mount Faucet
Faucet is installed in the wall. More worktop space around the sink with the standing faucet.
6. Bridge Kitchen Faucet
Two handles kitchen faucet with pull down sprayer.
Elegant design and classic style complement any kitchen.
7. Pull Out Kitchen Faucet
The sprayerhead can be pulled straight out.
Large pots can be easily filled with this function.
8. Pull Down Kitchen Faucet
The sprayerhead is similiar to the pull-out faucet.
With the high arc, it is more suitable for dish cleaning.
9. Beverage Faucet
360 degrees swivel spout: Adjust to any angles with easy access to any areas of the sink.
Drip-free performance; Lead-free brass body.
10. Faucet with Side Sprayer
The side spray is separate from the faucet itself and is an alternative to the pull-out/pull-down faucets.
This is added to an extra sink hole.
Whether the owner of a house is willing to clean the room, the point is not how nice the living room is, but how clean the bathroom is. So what should a good-looking bathroom need to be? Let's take a look. The sink over vanity is the most important part of the bathroom. Therefore, a nice sink can add a lot to the beauty of the bathroom.
There are two types of drainage.
Drainage in Wall: no exposed pipes can be seen, more beautiful.
Drainage in Floor: It can be seen that the pipe is directly connected to the countertop from the floor. There will be more cleaning work.
The advantage of the in-wall drainage is that if there is a leak in the drainage pipe upstairs, the neighbors downstairs will not be flooded.
The disadvantage is that once the drainage pipe buried in the wall is blocked, the wall needs to be destroyed, and the pipe may be dredged. But redoing the wall decoration is a new problem.
So you must use good materials when burying it, or you will be tossing yourself. Chinese families basically use the in-floor drainage, so they all need to customize the bulky cabinet to cover it.
Compared with the traditional floor-mounted bathroom cabinets, the wall-mounted cabinets has a better appearance and lightness. Its bottom is suspended, which is very convenient to clean up. And without a hint of bulkiness, it looks very stylish and beautiful.
Wall-mounted wash basins generally choose in-wall drainage, and the drain pipe is perfectly hidden in the wall. So drain pipe can not be seen. It will improve overall aesthetics. Therefore, before installing the washbasin, drainage treatment must be done so that it will not cause too much trouble for later maintenance.
In addition, the bottom of the washbasin can be selected according to your own preferences, made into an open partition or a closed cabinet, or simply mixed and matched, which can meet the storage needs of towels and some toiletries.
In modern bathroom design, floor-standing vanities are also welcomed by many young people today. However, its bottom is not completely close to the ground, and it does not look as solid and bulky as it used to be. It is basically designed with a bottom space, and it is supported by thin feet, which is also very convenient to install.
Of course, in addition to the pursuit of beauty, if you do not do a good job in the shower separation, it may cause water stains to penetrate or erode the cabinet legs, which will shorten the service life of the vanity over time.
There is no fixed choice for the drainage method of the floor-standing cabinet.
Even if you hide the sewer pipes in the cabinet in order to save effort, you can still ensure beautiful and practical effects. Make full use of the space. All objects will be placed neatly and uniformly.
I always thought that the washbasin is everything.
Later, after listening to the professional tasting, I realized how superficial such thoughts are. The washbasin is only a small part.
Above counter basin: high-end and high-grade.
Advantages: safe and convenient, many choices, the most important thing is easy disassembly.
Disadvantages: warping will appear at the connection with the countertop, especially the cheap water basin. And it is prone to leaking water to the sink cabinet. If the installation is not careful, there will be exposed glass glue, which will turn yellow and black after a long time.
Under-counter basin: low-key luxury.
Advantages: integrated with the countertop, beautiful and easy to clean.
Disadvantages: The countertop needs to be processed and installed in the workshop. The designer or installation worker who has insufficient experience will cause the water basin to deviate from the middle of the sink cabinet; it is necessary to choose a faucet with a suitable water outlet angle; it is inconvenient to disassemble.
By the form of installation, it can be divided into two types. One is a floor-standing and the other is a wall-mounted. Generally, floor-standing cabinets are used in bathrooms with separate shower rooms, and are more compatible with floor drainage. If your bathroom has a larger space, you can choose floor-standing wash cabinets.
Wall-mounted wash cabinets have become more popular in recent years. Its biggest advantage is that it is easy to take care of and save space.
In short, in this era of pursuing the supreme beauty, even the vanity has become more advanced unknowingly! If you don't want to make your vanity and bathroom sink look so mediocre, you might as well do some bold attempts and use the most popular design to improve the quality of life!
Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business.
We can provide total solution for projects. Look forward to cooperating with you.
The bathroom is used for bathing, washing, dressing, and indoor toileting. It is a frequently used home space. But the bathroom space only accounts for a small part of the overall home space. In the limited area, bathroom storage becomes very important.
It doesn't matter if you didn't plan the storage space when you renovated the bathroom at the beginning. Recommend 5 bathroom storage products to make your bathroom space organized.
1. Multifunctional Shelf
Wash away all fatigue and awaken physical and mental energy. The small bathroom is actually our energy gas station. Every morning and evening, we will spend some time alone with "it". The bathroom is a very important space in the home. The area of this space is small, but there are a lot of items that need to be accommodated. Therefore, the storage in many people's homes has become a big problem.
The multifunctional shelf solves this problem for everyone. Placed in the bathroom to store up some odds and ends. It looks neat and beautiful. And the simple structure makes it easy to clean. Moisture-proof and ventilated, it is a good storage item. It is effectively matched with the bathroom space.
2. Triangle Shelf
Another essential piece of hardware in the shower area is the triangle shelf. You can usually put shampoo, shower gel, skin care products, razor, etc. The racks are distinguished according to the installation position. There are ordinary rectangular racks, which are installed on a wall. There is also a tripod, installed at the junction of two walls.
This shelf uses a triangular design, simple in shape, beautiful and high-end, very suitable for modern bathroom design. Exquisite corner design, effective use of space. The weight-bearing capacity is also top-notch, meeting the needs of life.
3. Towel Rack
The towel rack is a must-have item for the bathroom, which integrates practicability and aesthetics. Nowadays, there are generally products such as single rod, double rod, multi-rod on the market.
The towel rack has good moisture resistance, corrosion resistance, compression resistance and high temperature resistance. The design of split layer and widening of the bars are adopted to prevent the towels from sticking to each other. Can be very moisture-proof and easy to take. Large space capacity. The lower bar can be used to hang towels. The upper layer can be used to put clean bath towels or clean clothes.
4. Multifunctional Paper Tissue Holder
A good tissue holder can last for many years. It is not only a tissue holder, but also a shelf. The mobile phone can be placed to free your hands temporarily. You can also put some aromatherapy or green plants and other small objects on it. The multifunctional paper towel rack adopts an open design, so you can know the remaining amount of paper tissue at any time, and no longer have to worry about being trapped in the toilet because there is no paper.
Suspended design, hygienic and moisture-proof. The roll of paper keeps a certain distance from the wall. The paper towel does not come into close contact with the wall.
5. Toilet Brush Holder
It is not hygienic to put the toilet brush on the ground, so there is a toilet brush holder. It is clean and tidy, and beautiful. The toilet brush holder uses high-quality stainless steel to make the bracket, which is waterproof, wear-resistant and not easy to corrode, and is not affected by water vapor and damp walls in the bathroom space. Long-term use is more assured.
Upgraded one-piece casting base design, meticulous workmanship, practical and durable. The simple style is highly integrated with the bathroom environment and enhances the bathroom style.
It is "too difficult" to put bottles and cans in a small bathroom. Organize items in a planned way and add storage items reasonably to make the bathroom space more tidy. Let's expand the small space from now on, let's take action!