











The sink must be installed in the bathroom? Take a look at these locations that may be more suitable for sinks in your new home!
As a patient with lazy cancer, where to put the sink determines how many steps I have to take to wash my hands. Do I have to go to the bathroom after eating snacks and watching a drama at night, and getting up to wash my hands? Can't the sink be placed at the door? Put it under my nose? Or even in the balcony close to me? The answer is yes.
01. Where should the sink be moved out of the bathroom?
In order to make it easier for you to use, we will give you a few common places to put the sink. It can be installed in the hallway. There may be few people who think of this, but it is very common in Japan. As long as space permits, they will find a way to add a sink near the hallway so that they can wash their hands as soon as they enter the house. In addition, the sink can also be used as a partition of the entrance, so that even the entrance hall is made.
Put the sink on the aisle at the entrance of the bathroom. In this way, the dry and wet separations can be easily realized. Because the washbasin only occupies a small area, the total space will not become small.
If you are worried that the total appearance will be affected by putting it outside, and later storage can not be done well and it is messy, you can directly weaken it visually during the renovation by adding a wall to enclose it.
Wooden fences or glass can also be used as partitions, and cabinets can be used for storage on top.
The glass partition can prevent water from splashing everywhere when washing hands, and keep the space visually transparent.
If there is a gap between two rooms, you may consider putting the sink here. Such as between two bedrooms, between the kitchen and the bathroom, etc.
The advantage of this is that it can make full use of the space and avoid the waste of repeated settings. At the same time, it can also have the function of dividing space. It can also be installed on the balcony. Modern people spend most of their time in the living room. If you put the sink on the balcony closest to the living room, because there is plenty of light and the view is open, will you feel better when you wash your hands?
We can also put the washing machine next to it, throw the clothes in and wash them.
It is relatively rare to install on the dressing table. A dressing table can be placed in the bedroom to store all kinds of small things, and it can be combined with the sink. Sinks can be installed in the bathroom, outside the bathroom, or between the cloakroom and the bathroom.
According to our thoughts, these may seem strange, but starting from the owner’s living habits, it seems to be a reasonable design. Tip: The disadvantage of placing the sink outside the bathroom is the laying of water and sewage and waterproofing. Need to discuss with construction workers in advance and implement as required. Waterproofing should also be done well. It is recommended to follow the waterproof standard of the dry area of the bathroom, and apply waterproof paint at least 30cm high on the wall near the sink and on the floor. Secondly, there is no door to block the washbasin outside. If the storage is not done properly, the messy scene will be directly exposed. Therefore, the corresponding storage function must be done well, and the choice of towels even become stricter. Otherwise sit in the living room and see a messy washing area.
02. An easy-to-use sink can be like this.
In addition to moving the washbasin, its appearance and comfort should also keep up. You need to know the following knowledge. The style of the washbasin: Above counter basin and under counter basin. Above counter basin has a super good looking. In addition to square, round, oval, there may be other petal shapes to choose from. Generally they can be matched with high body faucets.
The under-counter basin is installed under the countertop and glued to the countertop from bottom to top. The advantage is that it is very convenient to clean the countertop. It is very common to have water on the countertop, you can easily wipe the water into the basin. It is more convenient to have a mirror cabinet, and the storage capacity can be improved a lot. Some mirror cabinets are fully enclosed, and some are partially open for storage. What kind of mirror cabinet to choose depends on your living habits.
Lighting Design.
Light is a top requirement for looking in a mirror. Most people may only install a mirror headlight above the mirror. In fact, the best way is to set up lights on the left and right sides of the mirror, which is about one person wide. Many professional dressing tables are set up in this way.
Double Basin Design
The double basin design can improve life efficiency. For example, a family of four has to go to school and work at the same time. And two people washing together is also very warm. Of course, double basins may only be suitable for large bathroom space.
Basin Style
It can be a basin or not. An artistic design. For example, in a retro-style home, try a bicycle wash basin.
There are also a few stacked stones. Is there a trace of natural "spring" style when the water runs out from the stone?
If you like minimalist style, consider this transparent glass wash basin.
If you want to realize the separation of dry and wet, but in the small area of the bathroom it cannot be realized, the above method can be considered. It is indeed completely reasonable and feasible to move the sink out.
Many people want to have a bathtub in their homes. But it may be because of too small space, living habits or budget, and they choose to give up. The bathroom is worth planning. Today, we will introduce how people who don’t have a bathtub at home have arranged their own bathrooms.
1. All White Bathroom
Decorate the bathroom in all white. In this clean and concise space, everything is a pleasure. A little dirt will be found, and it can be cleaned and removed immediately. People who like white usually also like to tidy up the room.
However, when the bathroom is completely white, and even the bath towel and bathroom bottles are pure white, it is more obvious whether the color of the caulk, bathroom hardware, and electroplating are uniform.
Some bathrooms will have a combination of tiles and paint. People who pursue all whiteness should pay attention to whether there is a color difference between the paint and the tiles.
White marble covers the room, and with black hardware, the style immediately rises.
The glass partition does simple dry and wet separation, which does not affect the overall natural lighting.
2. Grey Bathroom
Those who find it troublesome to clean the bathroom can consider gray as the main color of the bathroom. Compared to the white tiles, the dirt looks less obvious on the dark gray. The entire cleaning can be completed in 5 minutes.
This bathroom uses different tiles, low-key but full of changes. Of course, the most eye-catching among them is the hexagonal tile.
Bronze-colored hardware has always created a nostalgic circumstance.
Some people use cement powder to decorate the bathroom, but the cement powder is prone to cracking and sanding. It is not recommended to use it in the bathroom, especially the shower area.
3. Wood Grain Bathroom
Whether it is Japanese, country, modern, classical and other themes, you can see the use of wood grain. If you want to step into a healing bathroom after work, wood grain is a great choice.
Because most bathrooms are not suitable for solid wood due to poor ventilation, wood-grain tiles are better.
Due to the different regional climate and bathroom ventilation conditions, many foreign wood that can be placed in the bathroom is not suitable for moving to China.
If the overall bathroom is white, it is also very eye-catching to use a set of wood-grained vanity cabinets.
Thanks for viewing our website. Hopefully you can find your interested items.
Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business.
In daily life, the planning of the bathroom is very important. A space of a few square meters has to bear a lot of sanitary ware and electrical appliances, such as toilets, bathtubs, washing machines, clothes dryers, etc. These are essential equipment that can improve the comfort and convenience of life.
The three-square-meter bathroom is also the size of most apartment bathrooms. The space is not large, but it does not affect people's pursuit of quality life. How to make good use of small space and achieve the aim of practical and beautiful appearance ? There are many ways.
01 Extend the sink counter to the washing machine and get an extra storage table.
If the area of the sink counter is relatively wide, you might as well design the washing machine and sink counter as a whole. By the way, the upper part of the washing machine is also designed as a countertop, which has an extra space for display. The whole area be neat and decent.
A large sink is exactly what women need. They have too many skin care products and cosmetics to be placed.
Suitable for: single women, or small families.
Advantages: The upper part of the washing machine is fully utilized and many things can be placed.
Of course, if you want to pay attention to some design sense, you can design the washing machine and the sink in a staggered layer, showing a patchwork of beauty, and it can also bring a unique atmosphere to a small space.
02 The washing machine and the storage cabinet coexist harmoniously, and one thing is multi-purpose and takes up less space.
If there are many things in the house, consider using more storage cabinets in the bathroom. But in a small space of three square meters, how should the washing machine be placed?
The washing machine, storage cabinet, and sink can be designed as a whole, and the three can use each other to realize their own value, visually beautiful, form a multi-purpose, and occupy a small area.
Suitable: Families with lots of things.
Advantages: One thing is multi-purpose, and it occupies a small area.
03 Maximize the use of corner space
There is always an unexpected room type of an apartment, such as a three-square-meter rectangle, but it happens to be faced with the problem of a lot of things and a lot of demand. The washing machine and the cabinet need to be put in the bathroom. How to achieve it ?
Three walls can be used. The storage cabinets, sinks, and washing machines leaning against the wall can perfectly maximize the use of corner space.
Suitable for: families who have many things and pay attention to space design.
Advantages: The smallest space is used to the maximum.
04 Storage rack: Use the height of space to realize vertical storage.
Different room types and different residents have different requirements for the placement of washing machines. Some people like simple display. Easy to take things, and easy to move the washing machine. In fact, a storage rack can solve all the troubles. The storage rack is light and convenient, and there is no construction problem. You only need to place it in a suitable position, put daily necessities on it, and put a washing machine underneath it to achieve a perfect plan for a small space. This is also a way to achieve vertical storage, which saves more space.
Suitable for: Singles with less things and high requirements for the convenience of life.
Advantages: easy to move, easy to clean, and less costly for decoration.
It is not difficult to stuff a washing machine in a three-square-meter bathroom. The key is to design in combination with different room types. In addition, the living needs and actual conditions of different residents must be considered to create a comfortable and practical bathroom space.
Aquacubic Has Rich Experience and Passion in Bath and Kitchen Industry. We can provide total solution for apartment projects.
In addition to the practicality of the apartment renovation, we also pay attention to its beauty. For example, choose wall-mounted toilets and washbasins; choose concealed baseboards; hide all the pipes; improve the overall aesthetics!
Concealed showers are more beautiful than exposed showers.
There are mainly the following 3 ways to install the shower:
1) Exposed installation: the water inlet pipe and mixing valve of the shower are exposed outside, which is not beautiful enough;
2) Concealed pipe installation: The inlet pipe is buried in the wall and the mixing valve is outside. This is most commonly used method;
3) Concealed installation: Completely opposite to the first type, the inlet pipe and the return valve are installed inside the wall. Leaving only the switch and the water outlet outside. Although it is beautiful, the process is complicated.
For concealed showers, there are also two different styles:
1) Top sprayer and hand shower
Look at the picture, the top shower head is matched with a hand-held shower head at the bottom. In this way, you need to determine the size of the shower head before renovation. And do the drilling and wiring layout. In terms of installation, this method is relatively simple.
2) With additional side spray
This is based on the former, plus a side spray function. During renovation, pre-installed in-wall boxes and multiple valve cores are required to match the water outlet. You can imagine how complicated this approach is! How to install it? Look down.
First determine the number of side nozzles (usually 2-6); the in-wall installed valve core has multiple outlet connection ports, from the valve core to the main water inlet, other outlets, top spray showers and hand showers; Secondly, cement leveling is required between the valve core and the wall, and in-wall installed parts are also used to stabilize; then leveling, waterproofing and pressing are performed to see if there is any leakage; the last step is to sticking ceramic tiles.
Compared with the exposed installation, the appearance of the concealed shower is certainly more attractive. However, the maintenance is complicated and cannot be ignored. The water pipe fittings of the exposed shower are all on the outside. If the concealed shower needs to be repaired, we can only break the wall! But if you choose a good quality shower, except for the water pipe problem, you don't need to break the wall under normal circumstances.
If you really like the appearance, it is not a big problem to choose a concealed shower. But if you are still worried about renovation and later maintenance, it is recommended not to try it.
Shower Purchase Skills
1. When choosing a shower, try to make the shower tilted (to see the water effect). If the top spray holes are obviously small or there is no water at all, it shows that the internal design of the shower is very low. It is impossible for the user to have a comfortable experience.
2. Look at the coating and valve core. Under normal circumstances, the brighter and more delicate the surface of the shower, the better the coating process. The high-quality shower uses high-quality ceramic valve core, which has high hardness and wear resistance, and is not easy to drip. The rotating adjustment handle is also very smooth.
3. Everyone knows that if the shower is used for a long time, there will be scale and impurities deposits, which will block the water outlet. If the mesh cover cannot be cleaned, the shower will not discharge water normally; in order to avoid the blockage of the water outlet due to poor water quality. All the shower nozzles should stick out for easy cleaning.
4. Shower accessories will directly affect the comfort of our shower. This cannot be ignored. For example, whether the lifting rod of the shower is flexible. Whether the shower joint is equipped with anti-twist ball bearings. Whether there is a rotation controller on the lifting rod, etc.
5. The water-saving function of the shower is the key point to be considered when purchasing the shower. Some showers use a steel ball valve core, and are equipped with a hot water controller, which can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. This type of shower with a reasonable design saves 50% of water compared to ordinary showers.
Installation Precautions
1. Do a good job of cleaning up during installation, especially the valve core. During the decoration, it is inevitable that decoration dust or even large particles of impurities enter the water supply pipe. If it is not cleaned up, these impurity particles will enter the valve core of the shower faucet, easily causing blockage or even destroying the internal structure of the valve core. If the shower has little water output, it is very likely that the cleaning work is not in place.
2. To ensure safety, equipotential terminals are indispensable.
An electric shock prevention system is indispensable in the bathroom: equipotential terminal. After all, compared with other spaces, the bathroom is accompanied by water all the year round, and the risk is relatively high. Connect with the equipotential terminal to prevent leakage, electric shock, and avoid dangerous situations.
There are a large number of shower options. So everyone can try to choose different showers. Traditional showers have gradually been eliminated. We must learn to keep up with the trend in renovation project.
Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers. The products include faucets, sinks, basins,
bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.
Look forward to cooperating with you.
Thanks a lot!
Ceramic sink is a kind of household goods. There are many kinds of sink materials, such as cast iron enamel, ceramics,
steel plate enamel, artificial stone, acrylic, crystal stone flume, etc. Most bathroom sinks are made from firecaly.
Ceramic sink is a kind of water sink which is made by integrated molding and firing. Its main body is mainly white.
It has the advantages of high temperature resistance, easy cleaning and aging resistance.
It can be wiped clean with cloth or clean metal ball in daily cleaning.
Step Ⅰ. Grouting
The production of ceramic sink is generally made by grouting.
The slurry is poured into a fixed die and allowed to solidify.
Step Ⅱ. Spraying Glaze
It is necessary to prepare qualified glaze slurry. Spray it on the surface of sink body.
Vitrify it into porcelain after firing; cover it on the surface.
Step Ⅲ. Forming
Forming is a drying process.
The process of further dehydration of semi-finished products.
Step Ⅳ. Preparation for Furnace
This is an important step before burning.
Workers need to check the surface & quality of the sinks and lay them together in trolley.
Step Ⅴ. Burning
Put the products on the kiln car according to certain proportion.
Based on the given temperature curve, sink will form finally.
Step Ⅵ. Storage & Logistic
With the development of storage & logistics industry,
we developed a complete solution for big size cargos.
Some faucets are used two or three years, and the water flow is intermittent or rusted into green. The handle is hard to be used for opening and closing. The size of the water flow depends on luck.
Some faucets have been used for 20 years, and the surface is still as smooth as new. The feel when adjusting the angle of the handle is still as silky as the chopsticks in a honey jar. The speed of the water flow are still adjusted as you like. So how can we pick a faucet that can last 20 or 30 years or more?
First, the kitchen faucet can be rotated 360°.
For ease of use, the kitchen faucet should be taller, and the spout should also be very long. It is best to extend above the drain and not splash water. If there is a hot water line in the kitchen, this type of faucet should also contain hot and cold hoses. In order to meet various needs, most of the kitchen faucets can rotate the body of the faucet left and right. The sprayer part of some faucet can be pulled out, which is convenient for cleaning to all corners of the sink.
Second, if the budget is enough, the material of stainless steel is preferred.
The material of kitchen faucet is generally brass, which is the most common faucet on the market. However. Due to the characteristics of the kitchen environment, pure brass faucets are not necessarily the best choice. All pure brass faucets have electroplating on the outermost layer, and the function of electroplating is to prevent corrosion and rust of the brass inside. There is a lot of oily smoke in the kitchen, and the greasy hands and cleaners on the hands when washing the dishes make it often necessary to clean the faucet. If you do not use the correct way to clean, it is likely to damage the electroplating layer of the faucet, causing the faucet to be corroded and rusted. If you want to choose an all-brass kitchen faucet, you must be sure to have excellent electroplating, otherwise it will easily cause the faucet to rust and corrode.
And now some manufacturers use high-quality 304 stainless steel to make faucets. Compared with pure brass faucets, faucets made of high-quality stainless steel are free of lead, acid, alkali, corrosion, and harmful substances, and will not pollute tap water. This is very important for drinking water in the kitchen; and the stainless steel faucet does not need electroplating, it is extremely difficult to rust, and the hardness and toughness are more than twice higher than that of brass products, so it is very convenient to clean. However, due to the high difficulty of stainless steel processing, the current high-quality stainless steel faucets are usually relatively expensive.
Third, pay attention to whether the length of the tap can clean the sinks on both sides.
When buying, pay attention to the length of the basin and the faucet sprayer. If it is a double sink, pay attention to whether the length of the faucet can clean the sinks on both sides when rotating. Most kitchen faucets can rotate the body of the faucet left and right, which is convenient for cleaning to all corners of the sink.
Kitchen Design
When designing a functional kitchen, the rule of triangles should be kept in mind. That is, the sink, stove and refrigerator are arranged in a triangle. The L-shaped kitchen fits this triangle shape very well. The L-shaped layout is most suitable for small and medium-sized kitchens. The first-class kitchen is not only about the layout, but also about creating delicious food through the inspiration of the right layout.
1. The blank walls are decorated with a series of wall shelves and hanging rails for kitchen utensils.
2. This design allows flower pots to be stored in a space that is not large enough to accommodate a shelf.
3. This complete wooden kitchen extends its style beyond the corridor, to the adjacent wall and a room door.
4. The length of the double-window countertop looks magnificent, and the intricate patterns on the other wall balance the overall appearance.
5. Large potted plants form a natural separation between the kitchen and dining area.
6. Use inline mode to make full use of small space.
7. The combination of open shelves and multi-colored blocks is an interesting solution.
8. Minimalist kitchens can use handleless flat embedded-in-wall furniture.
9. Even the few special tiles can bring new colors to the pure white kitchen.
10. An open shelf occupies one wall, and a closed cabinet occupies another wall. Keep small spaces ventilated and open, instead of containing too many complex elements.
11. Floor tiles help make smaller spaces appear wider.
12. Horizontal stripes are another way to expand the space visually.
13. This extraordinary kitchen has a series of open and closed designs that can show and hide different appliances.
14. Two bar stools turn the end of a cabinet into a breakfast bar.
15. Wrap the work counter on the side of the end cabinet to get a stylish and luxurious appearance.
16. This L-shaped kitchen layout has corner windows and is dominated by pure yellow color blocks. It overlaps with half of the wall cabinet and finally passes through the window glass in the form of a colored film.
17. Add light wood tones and pleasant prints to the white kitchen to create a Scandinavian-style kitchen.
Towel bar: Towel bar is used to hang towels. The installation position is generally a position closer to the bath, and the installation height is generally 1.4 to 1.6 meters from the ground. The installation height should not be too low, otherwise the towel will get wet when bathing. The installation methods of the towel bar can be summarized into two types, one is to install without punching and the other is to install with emptying. Hole-free installation methods generally include vacuum suction cup type and watering type. Screws are generally used for drilling holes. Nowadays, many families prefer the non-punch vacuum suction cup installation, because it is easy to install, fast, and does not require much effort when disassembling. It does not cause any damage to the wall, but after a long time, it is easier to loose and fall off. The fixing force is not as strong as screwing. The watering type, as the name implies, is fixed on the wall with nail-free glue. It takes more time to install, but the cost savings are better than others.
Towel rack: The towel rack is used to place bath towels. The installation location is next to the towel bar or in an open position in the bathroom. You can design the installation location according to the characteristics of your own bathroom. The length and width of the bath towel are several times that of the towel. The height of the installation is naturally higher than that of the towel bar, but it mainly depends on the average height of the family members.
Toilet paper holder: The toilet paper holder is used to place toilet paper. It is generally installed next to the toilet. The installation position should be lower than the toilet. If it is installed higher than the toilet, you can imagine how inconvenient it is.
Toilet brush holder: The toilet brush is generally installed next to the toilet, and it is recommended not to install it next to the toilet paper holder. The toilet brush usually contains bacteria when cleaning the toilet, and then the air around the toilet brush has many bacteria, and the bacteria are easy to adhere to the paper towel.
Storage basket: The storage basket is generally installed near the shower, and is used to place items such as shower gel and shampoo for easy bathing. The installation height is generally one meter two to one meter four. These are just for reference, and are of no practical use. You can design according to your own habits and believe in yourself.
Clothes hook: The characteristics of stainless steel clothes hooks are reflected in high temperature and low temperature resistance according to physical properties, and corrosion resistance and not easy to rust according to chemical properties. They are expensive and expensive, and are suitable for bathroom use. Space aluminum clothes hooks are characterized by not easy to fade, good environmental performance, not easy to rust, and easy to dye. The clothes hooks made of space aluminum materials on the market are rich in colors, strong in decoration, and low in price. The disadvantage is that the pressure resistance is weak. Not suitable for hanging heavy objects, suitable for various places. The copper clothes hook itself has high material density and good stability, so it is not easy to rust, resists pressure and is heavy, and is more expensive in the market. It is suitable for kitchens, living rooms and other places. Aluminum alloy is made of pure aluminum with some alloying elements, so aluminum alloy hooks are slightly better than space aluminum hooks in terms of performance. Zinc alloy is an alloy formed by adding other elements based on zinc, so zinc alloy clothes hooks are characterized by good manufacturability, long use time and easy cleaning. Wooden clothes hooks have low immunity to humid environments, poor physical properties, but strong decoration, suitable for living rooms, bedrooms, study rooms and other locations. Plastic clothes hooks are easy to mold, so most of the plastic clothes hooks on the market are not only highly decorative but also low-cost. The disadvantage is that the surface is not resistant to dirt and it is inconvenient to clean.
When we buy, we must consider the actual situation at home. Choose the right size and the required rack. Don't buy the package blindly. Some things may not be useful.