Basin Contemporary 8 Inch Faucet- China Factory Manufacturers Suppliers

In China some people say that the struggle in the big city is so hard. Why not go to work in a small town? Is it worth struggling to afford a small apartment for a lifetime? I believe many people will find it worthwhile, because in big cities there are opportunities that cannot be found in small towns. The small apartment is not terrible. We can remodel it. As long as we have a dream, everything is possible. The owner Mr. Zhang who lives in Shanghai, like most ordinary citizens, worked hard all the way from the small hometown and finally settled in Shanghai and bought an apartment of 70 square meters. After having a child, Mr. Zhang took his parents from his hometown. A family of 5 squeezed into a small apartment. There was only one bathroom. Every morning and every evening, they were faced with taking turns to line up to take a bath and wash. They had no patience after some time. So he thought about making another shower room, and he can make the most of the balcony. Looking at the balcony that costs him a lot, only used to pile debris and dry clothes, Mr. Zhang felt it was a pity. He had heard of a case of transforming a balcony into a shower room before, so he wondered why not give it a try. If it fails, it will be dismantled after all. After talking to his wife, Mr. Zhang started serious research. After careful study, he summarized the following points to note:

 

First of all, it must be waterproof. Due to the special location of the balcony, the back may be the living room or bedroom. Considering that moisture may cause mold and peeling on the back wall, it is recommended that the waterproof layer of the wall where the shower is installed is painted as high as possible. The waterproof coating is generally brushed 2~3 times.

 

Second, make sure that the ground has a slope. The ground also needs to be waterproofed, and it is also necessary to ensure that the ground has a certain slope so that the sewage from the bath is discharged to the drain and will not flow back to the living room or other places.

 

Third, strengthen heat preservation. There is a big difference between the balcony shower room and the indoor shower room. Generally, the indoor shower room has only one wall with windows, and it can be kept warm by installing a heating system.

 

Finally, pay attention to the issue of privacy.

 

After studying how to install it, the next step is to choose a good shower room. Which products can meet this special demand? Because the balcony shower room is unavoidable from the wind and sun, we must pay attention to its material and anti-rust, anti-corrosion, and anti-fading ability. At the same time, pay attention to whether the frame is strong and stable, and the wall of the shower room must be strong.

 

After comparison, Mr. Zhang finally chose this shower room. This shower room is based on apartment space. The large apartment frame glass curtain wall, angular and cylindrical surfaces make the entire bathroom space richer.

At the same time, automotive-grade toughened glass has a thickness of 10MM, can withstand 700° high temperature, and has a high strength about 5 times that of ordinary glass, with outstanding impact resistance and thermal stability. In addition, EPM steel mold protection is added, so you don't have to worry about the risk of glass bursting. Even if it breaks, it will still stick to the debris to prevent the glass from splashing and hurting people. You can take a shower without restraint.

The door frame, handle and hinge outside the main body of the shower room are all made of high-quality aluminum alloy, and the surface should also be treated with anti-corrosion, anti-rust and anti-oxidation. In this way, there will be no signs of paint falling off after being exposed to the wind and sun on the balcony, and the structure is relatively strong and not prone to deformation.

In addition, the shower room is installed on the balcony. We will most worry about water will flow everywhere. This shower room has a overflow channel and magnetic tape, which can lock the water in all directions. Don't need to worry about getting the living room wet.

Ordinary sink, also known as drawn sink, is formed by pressing and stretching a whole piece of steel plate.

The principle is similar to balloon blowing, so the bottom and corner of the water sink will be thinned properly, 

usually made of 0.8mm thick steel.

The Handmade Sink is not made piece by piece by hand, but made by cutting, bending and laser welding the steel plate.

Will not change the thickness of the steel plate in the corner, the sink is very sturdy and solid. Usually this thickness is 1.2-1.5mm.

The appearance has strong sense of line, and the weight is much heavier.

The small R angle of handmade sink is not only better in appearance, but also higher in the utilization of the whole sink space.

1. X Grooves Design

Optimized bottom slope makes kitchen sink draining faster than normal sinks. Gently sloped bottom, fast draining and dry after using.

Handmade X grooves design, not only increase the design aesthetic but also easy to drain water in a minute.

Rear set 3.5”drain matches most kitchen appliances and fits the most Common Garbage Disposal System and unlocks extra space.

2. Nano Surface Technology

Nano surface as Lotus leaf. Water and oil flow quickly and no trace left.

Hardness of Nano surface: ＞8H Hardness of regular surface: ＞4.5H

Extreme craftsmanship focuses on every detail of the sink.  Meets the UPC, cUPC, CE certification standards.

3. POSCO 304 SUS Material

Durable scratch and stain resistant stainless steel surface helps the beauty last.

Real 16 / 18 gauge material; never chip or crack. Commercial grade satin finish. Thick 304 Stainless Steel construction.

9 - 10 inches deep large sink can hold a lot of pots and pans. Experience the luxury brought by the global high-end manufacturing industry.

4. Soundproof Pad - 7pcs

Extra-thick coating and thick sound rubber pad assure exceptional noise reduction.

Insulative padding can dramatically reduce the noise causing by water dripping,making an excellent effect on noise elimination.

It can enhance the elegance and high quality of the kitchen, and it will become the focus of your kitchen. The high quality of the sink is praised and recognized by the most demanding customers

If not to consider the faucet valve core and aerator, lead-free brass faucet and general faucet mainly differ in the material and technology.

 

Ⅰ. Raw Materials

The main raw material of lead-free brass faucet is made of international standard H59 and H62 copper. The casting adopts steel mold for gravity casting with uniform faucet wall thickness of 2.2-3.0 mm.

The main reason for using brass is the antibacterial activity. This can prevent bacteria from growing on the inner wall of the faucet, which is an advantage that other materials (such as stainless steel and plastic) do not have.

 

Ⅱ. Surface Technology

Surface treatment is very important for lead-free faucet, which is related to the service life, finish and wear resistance of the faucet. High quality faucet surface electroplating is usually mirror effect. It can eliminate secondary water pollution and ensure water safety.

How to judge the quality of the surface treatment of a faucet?

It can be easily judged by the following 3 points:

1. A good faucet will have a moisturizing and shiny surface, while a poor quality will have a dim gloss;

2. A good faucet will have a flat surface, while a poor quality faucet will have a wave surface, even a dent.

3. Good faucets are more wear-resistant, and there are no scratches, but inferior products will have dense scratches on the surface.

Generally, the surface coating of high-quality brass faucet has only 2 layers, and the product can pass 48 hours neutral and 24 hours acid salt spray test.

Ⅲ. Production Process

The production process of faucet is generally the following 16 steps: 

copper ingot - dissolution - casting - cleaning after casting - casting inspection - machining - tolerance inspection - grinding - surface inspection - electroplating - electroplating inspection - assembly - pressure test - finished product inspection - packaging - delivery.

Each process has strict requirements for the production process.

The difference of faucet material selection and production technology determines that the price of lead-free brass faucet is generally higher than stainless steel and plastic faucets.

Some faucets are simple and practical, while others are decorative. Faucets can be in many different materials and shapes, such as short/high, single/double handle, stainless steel/brass, chrome/black/gold colors, etc. It can reflect the contemporary architectural decoration style. Also so many brands of faucets are available. Do you want to know the best faucet brands in China? Let's take a look at the ranking of China's top 7 faucets brands in 2020.

Ⅰ. MOEN

Moen entered the Chinese market in 1994 and established its first sales company in Waigaoqiao Free Trade Zone, Shanghai. In the following few years, American Moen company has established offices in Shanghai, Beijing, Guangzhou and Chongqing, and its sales network has covered more than 180 cities in China. In 1996, Moen set up a joint venture factory in China with global advanced production management and manufacturing technology, which shows its confidence in the Chinese market and its determination to develop in China for a long time. At the same time, all the factories in China have passed ISO9001 quality system certification and ISO14001 environmental system certification. Relying on the deep understanding of the needs of users, distributors, agents and professionals in the industry and the joint efforts of all employees, American Moen company has become one of the leading figures in China's kitchen and bathroom equipment industry, and has established a strong sales network and perfect after-sales service system. The company's business is developing rapidly, and its products are deeply loved by users.

Ⅱ. Jomoo

Founded in 1990 and headquartered in Quanzhou, Fujian Province: the Economic Zone on the west side of the Taiwan Strait, Jomoo Group is a large comprehensive bathroom leading enterprise and a national high-tech enterprise integrating R and D, production, sales and service. It is also the Secretariat of "Kitchen and Bathroom Hardware Sub-technical Committee of National Hardware Standardization Technical Committee". The group's brand "JOMOO" has won many national honors such as "China's Famous Trademark", "China's Environmental Label Product Certification", and has been selected into the government green procurement list for many times.

Jomoo group headquarter covers an area of more than 1.34 square kilometre. It owns 7 subsidiaries, 4 business divisions and more than 8500 employees. Since its establishment, Jomoo group has taken "creating healthy kitchen and bathroom life, making the earth environment better" as its mission. Through continuous scientific and technological innovation, Jomoo group has made great efforts to provide customers with safe and environmental protection, resource-saving products and high-quality services, and constantly improve and enhance the quality of home life.

Ⅲ. Hansgrohe

In 1995, Hansgrohe set up an office in Shanghai to introduce the world's top bathroom brand to China. Hansgrohe Sanitary Products (Shanghai) Co., Ltd., a wholly-owned Chinese subsidiary of Hansgrohe group. It was established in Shanghai Songjiang Industrial Zone. It is also the fourth wholly-owned factory invested by Hansgrohe abroad. 

2000: Hansgrohe sponsored the publication of the Chinese version of <The History of European Bathroom Culture>, which once again shows Hansgrohe's long-standing bathroom culture. 

2001: Hansgrohe celebrates its 100th birthday. Four offices have been set up in Shanghai, Beijing, Guangzhou and Chengdu; A total of 50 stores and 20 distribution points were set up, successfully occupying the high-end bathroom market; Many high-end residences and hotels use Hansgrohe products. The representative projects are Grand Hyatt Shanghai, Venice Shenzhen, Hilton Chongqing, Beijing Hotel, GE Times, etc.

Ⅳ. Kohler

Kohler, founded in 1873 and headquartered in Wisconsin, is one of the oldest and largest family businesses in the United States. Kohler is a global leader in kitchen and bathroom products, engine and power generation systems, furniture, home decoration, hotel services and first-class golf clubs.

As early as the 1930s, Kohler products had a deep relationship with China. Kohler sanitary ware was used in many famous buildings in Shanghai, such as Jinjiang Hotel and Da Guang Ming Cinema. In 1995, Kohler's China office was established in Hong Kong. Since then, Kohler has officially entered the Chinese market. In 1999, Kohler set up its headquarters in Shanghai and set up offices in Beijing, Shanghai, Guangzhou, Chengdu, Wuhan, Hangzhou, Nanjing and Shenzhen. Till today, Kohler has 10 factories, more than 500 regular exhibition halls and more than a dozen flagship stores in China.

Ⅴ. COSO

COSO originated in Germany. Since 1993 when it came to China to create a professional sanitary ware production base, COSO has created logical and beautiful product by virtue of German industrial design concept, first-class material, ergonomics benchmark, mathematical space, rigorous manufacturing and rational beauty. COSO has won the support and recognition of the majority of consumers. After years of development, COSO has become a global leading brand of healthy sanitary ware.

In the industry, COSO products take the lead in passing ISO9001:2000 quality management system certification and EU CE certification. It has won the titles of "China Top 10 Brands of Sanitary Ware", "China Top 10 Brands of Building Materials", "China Energy Saving and Environmental Protection Promotion Products", "China Famous Brand", and "China Original Bathroom Design Award in 2007”. In 2020, the company participated in Shanghai World Expo to fully demonstrate the value and strength of the brand.

Ⅵ. TOTO

TOTO was founded in 1917. It was initially named Toyo Pottery Co., Ltd., and then renamed TOTO Co., Ltd. In 1912, TOTO set up a laboratory specializing in the research and development of sanitary ceramics (at that time, sanitary ceramics products were very common in Europe and the United States, but wooden toilets were still popular in Japan, which was in great contrast with the advanced sanitary culture in Japan today). With the wide sales of these sanitary ceramics products, TOTO used its excellent products to challenge the traditional health concept which has been accepted by the public. Till today TOTO is still working hard for it.

TOTO is a manufacturer of sanitary ware and related equipment for civil and commercial facilities. Pursuing high quality and high technology, so that users can enjoy a sanitary, healthy and comfortable life is the consistent goal.

Ⅶ. Grohe

Friedrich Grohe AG CO. KG Group is a world famous supplier and global exporter of sanitary ware products and systems. Founded in 1936, it has branch offices, 12 production plants and 17 business subsidiaries in 140 countries around the world.

It adheres to the founder's spirit of precision and high quality. Its business covers most countries and its reputation spreads all over the world. Grohe has made remarkable achievements. With the company moving towards a new global environment, the total turnover of Grohe increased to 1.5 billion CNY in 2020, and the export volume accounted for 64.3% of the group's total turnover.

For a more useful and faster-drying bathroom, toilet, shower, and washbasin must be separated.

The toilet, washbasin, and shower located in three areas allows people to use them separately.

 

This design has more advantages. 

1. Dry area always being dry.

Using a three-separated bathroom, when the shower is completely independent, the sink and toilet area will not be affected by the shower. Cleaning is also more convenient.

 

2. More people can use the bathroom at the same time.

In the morning some want to use the toilet and some want to brush their teeth. If there is no separation, as long as one person enters, the whole family will have to wait.

However, with the three-separated bathroom, everyone can save time and use separately.

 

Three-separated Bathroom Layout

If the bathroom is a long and narrow shape, it is recommended that the toilet, washbasin, and shower are arranged in a row.

Usually the most frequently used washbasin will be placed in the middle, so you can come in and use it at any time. To the left and right are the shower area and toilet.

The toilet and the shower area can also be arranged on the same side, and the washbasin is placed on the opposite side to form a T-shaped arrangement. Hotels often use this layout, which is relatively confidential, but does not waste space.

 

If you want to add a bathtub, because the bathtub is used less frequently, it is usually placed in the corner next to the washbasin.

 

But to be honest, the three-separated bathroom requires a relatively large area. The partition wall will be added, and the distance between the shower, toilet and washbasin will be increased. If three separations are used, it is bound to reduce the size of other spaces.

 

Design and Construction Considerations

1. The minimum shower area wide is 90cm.

The shower area should be kept wide enough for the person to turn around, and hands should not touch the wall easily when showering. It is convenient to have a width of at least 90 cm.

 

2. The toilet area is at least 70cm wide.

If you don't want it too narrow when going to the toilet, the wall should not be too close. Starting from the center of the toilet, leave a width of 35 cm or more to the left and right to make it easy to use.

The human action is to turn around and sit down on the toilet, so 60 cm of moving space is required in front of the toilet.

 

3. If the toilet is adjacent to the shower area, the water pipe is easy to install.

When the toilet and the shower area are adjacent to each other back to back, the pipeline can be hidden in the partition between the two, and the distance of the pipeline can be shortened.

 

4. There is no need to install a floor drain in the toilet and washing area.

Since the three-separated bathroom has completely separated the toilet, washbasin and shower, and now fewer people will flush the floor. Therefore, it is only necessary to install a floor drain in the shower room. Blocking with waterproof strips can ensure that the toilet and washbasin area remain dry. For floor cleaning in dry areas, it is recommended to wipe with a mop.

 

5. Reduce the area of waterproof coating.

Ordinary bathrooms are usually recommended to do waterproof layer on the walls and floors of the whole room due to the spread of moisture. However, in the three-separated bathroom, there will be no excess water vapor in the toilet and washbasin area. It is recommended to do waterproof only half-height walls.

 

Then we take a look at the examples of the three-separation bathroom.

 

U-shaped Layout

This is a typical hotel bathroom layout. The sink is in the center, and the toilet, shower area, and bathtub are placed on both sides, forming a U-shaped layout. Suitable for use in large-area bathrooms.

 

The doors of the shower room and toilet area are designed with metal mesh, which is ventilated and can be cleverly hidden.

 

The walls and floors of the whole room are paved with the same marble. With metal accessories, the overall style is particularly high-end.

 

One-line Layout

With the double washbasin design, two people wash at the same time without being crowded. With double-sided mirrors and wall lights on both sides, it forms a balanced and symmetrical design.

 

The retro tile floor, the decorative pillars on both sides of the countertop, the delicate and elegant chandeliers, the natural and romantic simple European style.

Off-white is selected as the main color of the space, matched with earth-colored walls. The calm atmosphere makes the bathing space more comfortable and relaxing.

 

If you don't make a door, just use cement partition to separate the shower area or toilet, which can reduce the visual barrier.

A sliding door is used between the shower area and the bathtub, which can be ventilated at any time and can achieve the effect of privacy.

Two-line Layout

The washbasin area is in a single row. Since it is isolated from the shower area, it is relatively dry. The dressing storage is also set together, making it easier to use.

The wash area is in line with the toilet area. The bathtub is next to the shower area. Effectively separate the dry and wet areas. At the same time, hooks are installed on the wall for the towels and bathrobes.

 

If the bathroom does not have a window, you may wish to use colors and lights to brighten it up. The orange half-wall design makes the space bright and vibrant. Place some flowers and plants to make it more vibrant.

The wall is made of cement gray, so even if water drops splash off, it will not leave a trace. The mirror cabinet on the top can effectively increase the storage capacity.

 

In order to leave the central aisle, move the sink outside. Arranging the shower area and the toilet back to back not only effectively shortens the length of the water pipe, but also makes the design more concise.

In a typical T-shaped layout, the shower area and toilet are hidden behind the washbasin to maintain privacy. The wash area divides the bathroom into two parts.

 

The entrance of the bathroom is designed with arches, and the retro red bricks are more antique. The tiled floor extends to the left and right.

 

After reading the above cases, do you think it is good-looking and practical?

 

Thanks for viewing our website. Hopefully you can find your interested items. Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business. We are one-stop supplier of bathroom and kitchen products.

Buying a new bathroom sink faucet can be a challenging task. You have to consider many factors, such as installation, types, and finishes. 

Also, a wide variety of brands and faucets are available. The bathroom sink is a vital fixture, so selecting the correct faucet is essential. 

Here are the steps for how to choose a faucet for your bathroom sink.

3 Tips on Choosing a Faucet

1. Installation

If you want to switch from two handles to one, you have to think about the number of holes in the sink. 

Most sinks have three holes: one for the hot handle, one for the cold and one under the spout. 

Some single-handle faucets include a cover plate to hide the extra holes. But some don't, so check the label. 

If you currently have a “wide spread” bathroom faucet with two handles far from the spout, 

you can’t switch to a single-handle model.

2. Faucet Types

Ⅰ. Single-hole faucets combine the spout and mixing handles—often a single lever—into one unit that requires only one drilled sink hole. 

For retrofits, some models include a bottom plate that will cover existing three-hole openings. Single-hole faucets are ideal for smaller sinks, 

such as powder room baths. Their simplicity reflects modern sensibilities.

Ⅱ. Center-set faucets fit standard three-hole sinks (with outer holes drilled 4 inches apart). They'll have either a single lever or 

two handles mounted on a 6-inch plate. They're ideal for most bathroom sinks.

Ⅲ. Widespread mounts have three separate pieces: Two handles and the spout. 

The standard distance between the handles is at least 8 inches, and the three pieces tend to be larger than other types of bath faucets. 

Smaller versions, called minispreads, are designed for standard holes drilled 4 inches apart.

Ⅵ. Wall mount faucets have gained popularity along with freestanding or vessel-type sinks that require longer spouts 

that extend well over the top of the bowl. Not every faucet fixture can be easily categorized. Kohler, for example, 

makes a faucet that's integrated into a mirrored wall cabinet. 

All you see is the tiny flow control lever peeking out from the bottom of your mirrored self.

3. Faucet Finishes

Choose a finish that matches nearby cabinet hardware, towel bars, etc. Mismatches look bad. If you plan to replace existing hardware, 

your choice of faucet finishes is wide open. The vast majority of faucets have polished chrome, satin nickel or bronze finishes. 

All of these finishes are durable and keep their good looks for years. But some are more durable than others.

Chrome is the most durable finish and the easiest to keep clean-that's why it's always been the favorite 

for commercial kitchens and public bathrooms. If your faucet gets heavy use, it's your best bet for long-term toughness.

Nickel finishes are usually labeled “brushed,” “satin” or “stainless steel” and have a dull shine. 

They're durable but prone to fingerprints and water spots, so they're harder to keep clean. 

Some have a coating that reduces stains and smudges, but that coating isn't as durable as metal and may chip or wear.

Bronze faucets have a brownish tone and are often called “oiled” or “rubbed” bronze. 

But the surface is a coating (such as epoxy) rather than metal. 

This coating is tough stuff, but can be chipped or scratched more easily than metal.

 

Pull as you like. Return accurately.

When renovating the bathroom, the height of the faucet is a headache: if you buy a low one, you have to bend over when washing your hair or  face; if you buy a high one, It's not convenient for the opening and closing of the mirror cabinet. On the other hand, it will cause water splashing due to the large drop...It is not a problem with the Aquacubic faucet!

 

Aquacubic faucet adopts pull-out design. With 360 degree sprayer head to realize free rotation and pull freely, the water can reach any place where the user needs it, and meet all the needs in the bathroom water process. After use, just let go. The built-in gravity hammer can help the faucet retract easily and quickly. Users can experience the pleasure of face cleaning and hair washing in a new way.

Long lasting new. Easy to clean.

The bathroom is full of moisture. In such an environment, water stains or fingerprints are easily left on the surface of the bathroom faucet. Scales will accumulate on the faucet after drying. They are difficult to clean and even gradually corrode the coating and form rust spots on the surface. To make the bathroom faucet last longer, you need surface treatment technology with easy-to-clean coating.

 

Aquacubic faucet adopts precision electroplating layer and SRS surface treatment technology, and passes 24 hours acid salt spray test. The surface has an elegant metallic luster. They are wear-resistant and corrosion-resistant. Faucet will be bright as new with a light wipe. You don’t have to worry about leaving fingerprints and watermarks when you touch it with wet hands. This reduces cleaning time.

 

The bathroom carries most of the cleaning work of a family. In turn it affects the living experience and life quality of the whole family. If you want to enjoy the exquisite life, you need the Aquacubic faucet that can be pulled freely to bring a fashionable bathroom to you!

Many years later, people who use black frame shower doors and windows will surely be grateful for this choice.

The black frame has always been loved by people because of its beautiful industrial style. We believe that it is only a matter of time before people find the elegant beauty of a bathroom with black frame shower doors and windows. Black-framed doors and windows made of aluminum or steel look very beautiful in the factory. Whether it is used in the bathroom or other places, it will receive fascinating results. Let's directly look at 8 display pictures that reflect the advantages of black frame shower rooms. I believe there is always one suitable for you.

 

1. Black frame bathroom doors and windows are the eye-catching emperor of the decoration industry!

 

Even with Karaka marble floors and expensive dressers decorated with quartz, the star of the bathroom is still the brass shower head and black aluminum bathroom doors and windows. If you are looking for exquisite bathroom decoration, it is really black framed doors and windows.

 

2. The black frame shower room doors and windows give a unique industrial style.

 

A black framed shower door with coverless lamps and a modern yellow dressing table can create an attractive industrial atmosphere. The high glass window design not only facilitates daylighting but also ensures privacy.

 

3. The black frame doors and windows show the beauty of elegance.

 

When the black frame doors and windows reach the roof directly from the ground, they can make the small room look taller than it actually is. Matched with herringbone parallel pattern floor tiles, a small white marble dressing table and a tall dressing mirror. The overall effect is so elegant and restrained.

 

4. The black frame shower room makes the large white areas appear clearer.

 

White floor tiles + white bathtub + white sink, the bathroom can easily become monotonous. At this time, we can use black frame shower room and black hexagonal tiles in the shower room to enhance the contrast with the white environment, making the whole room more layered and three-dimensional. Finally, brass showers, brass faucets and geometric chandeliers are used to make the finishing touch.

 

5. The black framed doors and windows make the walk-in shower room stand out.

 

An open shower saves space in a small space. It is hard to imagine how elegant a shower room with framed doors and windows is! Due to the good closure of the black frame doors and windows, the slate wall panels and the mosaic wall tiles on the upper wall embellish them, the whole shower room is like a small room fully decorated.

 

6. A shower room with a black frame is simply too modern.

 

Patterned floor tiles, black framed shower doors and windows, and a black dressing table, one of the countless bathrooms in London, looks perfectly adapted to the urban environment in which it is located.

 

7. The black frame shower room can be easily connected with different styles.

 

Hesitating between your favorite pastoral style, industrial style and modern style? The black frame shower room will help you solve it! It can act as a bridge between styles, helping different style elements to seamlessly match together.

8. The black frame shower room are timeless decorations.

 

The black frame shower room may only be fresh for a short period of time, but it does not mean that it will soon become obsolete. This is a decoration with permanent vitality. Especially when paired with other classic elements, like mosaic tiles, subway tiles and some traditional decorations, the black frame shower room has a simple yet elegant charm.

 

Thanks for viewing our website. Hopefully you can find your interested items. Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business. We are one-stop supplier of bathroom and kitchen products.

Balinatu Bali Lap Riverstone Art Countertop Basin RM1,033.00 Balinatu Bali Natu Riverstone …

American Standard offers a wide variety of farm sinks in cast iron, white, fine fire clay, and stainless steel options. In addition to a variety of color options are multiple styles ranging from …

The hoop shower curtain rod is a one-inch diameter which attaches to the wall and ensures great stability. The installation process is easier with hardware that the manufacturer sends. These installation kits are also rustproof just like the curtain rod. It’s all because everything is made of aluminum and the magic is here.

Cleaning your utility sink shouldn’t be a challenge if you know the right cleaning agents to use and the steps for cleaning it. Whether you’re dealing with stubborn soap scum stains or paint splatter on your sink, follow this simple guide to get …

Our Bathroom Wash Basin collection includes Counter-top Basins, Vessel Lavatory, Top mount Basins, Semi-Recessed Basin, Under-counter Basin, Wall Hung / Wall mount Basins and Self-rimming Basins and Hand Rinse Basin from major Basin brands in Singapore like Hera, Toto, Grohe, Kohler, American Standard, Zaffiro, Tiara and Saniton.

smart touch kitchen faucet put out Stainless Steel Sink Mixer Tap One-Handle Sensor touch Kitchen cupc faucets with 2 Function

Shower Curtain Rods 19 results In Stock At My Store All Filters Sort By: Relevance Shower Curtain Tension Rod, Brushed Nickel, 72-in W W W Shower Curtain Tension Rod, Brushed Nickel, 72-in

hansgrohe Kitchen faucets: Talis S, Pot Filler, Wall-Mounted, Art. no. 04057000 | hansgrohe USA Talis S Pot Filler, Wall-Mounted Write a review Product Finish chrome Model No. 04057000