Folding Faucet- China Suppliers Factory Manufacturers

Towel bar: Towel bar is used to hang towels. The installation position is generally a position closer to the bath, and the installation height is generally 1.4 to 1.6 meters from the ground. The installation height should not be too low, otherwise the towel will get wet when bathing. The installation methods of the towel bar can be summarized into two types, one is to install without punching and the other is to install with emptying. Hole-free installation methods generally include vacuum suction cup type and watering type. Screws are generally used for drilling holes. Nowadays, many families prefer the non-punch vacuum suction cup installation, because it is easy to install, fast, and does not require much effort when disassembling. It does not cause any damage to the wall, but after a long time, it is easier to loose and fall off.  The fixing force is not as strong as screwing. The watering type, as the name implies, is fixed on the wall with nail-free glue. It takes more time to install, but the cost savings are better than others.

Towel rack: The towel rack is used to place bath towels. The installation location is next to the towel bar or in an open position in the bathroom. You can design the installation location according to the characteristics of your own bathroom. The length and width of the bath towel are several times that of the towel. The height of the installation is naturally higher than that of the towel bar, but it mainly depends on the average height of the family members.

Toilet paper holder: The toilet paper holder is used to place toilet paper. It is generally installed next to the toilet. The installation position should be lower than the toilet. If it is installed higher than the toilet, you can imagine how inconvenient it is.

Toilet brush holder: The toilet brush is generally installed next to the toilet, and it is recommended not to install it next to the toilet paper holder. The toilet brush usually contains bacteria when cleaning the toilet, and then the air around the toilet brush has many bacteria, and the bacteria are easy to adhere to the paper towel.

Storage basket: The storage basket is generally installed near the shower, and is used to place items such as shower gel and shampoo for easy bathing. The installation height is generally one meter two to one meter four. These are just for reference, and are of no practical use. You can design according to your own habits and believe in yourself.

Clothes hook: The characteristics of stainless steel clothes hooks are reflected in high temperature and low temperature resistance according to physical properties, and corrosion resistance and not easy to rust according to chemical properties. They are expensive and expensive, and are suitable for bathroom use. Space aluminum clothes hooks are characterized by not easy to fade, good environmental performance, not easy to rust, and easy to dye. The clothes hooks made of space aluminum materials on the market are rich in colors, strong in decoration, and low in price. The disadvantage is that the pressure resistance is weak. Not suitable for hanging heavy objects, suitable for various places. The copper clothes hook itself has high material density and good stability, so it is not easy to rust, resists pressure and is heavy, and is more expensive in the market. It is suitable for kitchens, living rooms and other places. Aluminum alloy is made of pure aluminum with some alloying elements, so aluminum alloy hooks are slightly better than space aluminum hooks in terms of performance. Zinc alloy is an alloy formed by adding other elements based on zinc, so zinc alloy clothes hooks are characterized by good manufacturability, long use time and easy cleaning. Wooden clothes hooks have low immunity to humid environments, poor physical properties, but strong decoration, suitable for living rooms, bedrooms, study rooms and other locations. Plastic clothes hooks are easy to mold, so most of the plastic clothes hooks on the market are not only highly decorative but also low-cost. The disadvantage is that the surface is not resistant to dirt and it is inconvenient to clean.

When we buy, we must consider the actual situation at home. Choose the right size and the required rack. Don't buy the package blindly. Some things may not be useful.

There are no ifs in life, and even more for decorations. There is no what ifs after the decoration is finished. In order to avoid this kind of regret, we summarized many kitchen decoration experiences for you.

 

1. The most durable cabinet door panel is the fireproof panel, the shortest life span is the blister, the most non scratch resistant is the painted, the most expensive is the solid wood, and the cheapest is the double veneer.

 

2. The stainless steel countertop is the most durable, the artificial stone is the least resistant to dirt, and the quartz stone is the most expensive. If used frequently, stainless steel countertops are the most suitable. If the color tone is cold, you can use panels and tiles appropriately.

 

3. The stainless steel embossing countertop is less scratched than the brushed countertop.

 

4. The stove must have small openings on the surface to prevent the soup from overflowing into the stove.

 

5. The sink must have a bottom grid to prevent the sewer from being blocked and to facilitate cleaning.

 

6. When renovating water pipe and electricity, you must think about the cabinet layout and electrical requirements. Be sure to reserve enough sockets. It is better to keep sockets on the front and rear walls. Waterproof covers are not necessary.

 

7. If most of the gas pipes are wrapped in the cabinet, it is best to leave a gas alarm socket.

 

8. The tiles in the kitchen can be matte or polished, which are easier to clean. Don't choose pitted or rough models, which are difficult to take care of.

 

9. If you rarely cook, consider an open style. If cook much, it is safer to be closed. No matter how good a range hood is, it is impossible to suck all the fumes away.

 

10. The hose must be replaced every two years.

 

11. In addition to the main valve, it is better to have separate valves for gas stoves and gas water heaters, so that they can be closed easily when problems occur.

 

12. The sink drain must be made S-bend, otherwise the smell will return.

 

13. Do not apply glue between the stove and the countertop to facilitate safety inspection.

 

14. When installing the side range hood, it is better to be as close to the stove as possible.

 

15. If you install an ordinary or European-style range hood, it is better to install a thin stainless steel plate on the tile around the stove, so that it can be easily cleaned.

In addition to the practicality of the apartment renovation, we also pay attention to its beauty. For example, choose wall-mounted toilets and washbasins; choose concealed baseboards; hide all the pipes; improve the overall aesthetics!

 

Concealed showers are more beautiful than exposed showers.

 

There are mainly the following 3 ways to install the shower:

1) Exposed installation: the water inlet pipe and mixing valve of the shower are exposed outside, which is not beautiful enough;

2) Concealed pipe installation: The inlet pipe is buried in the wall and the mixing valve is outside. This is most commonly used method;

3) Concealed installation: Completely opposite to the first type, the inlet pipe and the return valve are installed inside the wall. Leaving only the switch and the water outlet outside. Although it is beautiful, the process is complicated.

 

For concealed showers, there are also two different styles:

1) Top sprayer and hand shower

Look at the picture, the top shower head is matched with a hand-held shower head at the bottom. In this way, you need to determine the size of the shower head before renovation. And do the drilling and wiring layout. In terms of installation, this method is relatively simple.

 

2) With additional side spray

This is based on the former, plus a side spray function. During renovation, pre-installed in-wall boxes and multiple valve cores are required to match the water outlet. You can imagine how complicated this approach is! How to install it? Look down.

 

First determine the number of side nozzles (usually 2-6); the in-wall installed valve core has multiple outlet connection ports, from the valve core to the main water inlet, other outlets, top spray showers and hand showers; Secondly, cement leveling is required between the valve core and the wall, and in-wall installed parts are also used to stabilize; then leveling, waterproofing and pressing are performed to see if there is any leakage; the last step is to sticking ceramic tiles.

 

Compared with the exposed installation, the appearance of the concealed shower is certainly more attractive. However, the maintenance is complicated and cannot be ignored. The water pipe fittings of the exposed shower are all on the outside. If the concealed shower needs to be repaired, we can only break the wall! But if you choose a good quality shower, except for the water pipe problem, you don't need to break the wall under normal circumstances.

 

If you really like the appearance, it is not a big problem to choose a concealed shower. But if you are still worried about renovation and later maintenance, it is recommended not to try it.

 

Shower Purchase Skills

1. When choosing a shower, try to make the shower tilted (to see the water effect). If the top spray holes are obviously small or there is no water at all, it shows that the internal design of the shower is very low. It is impossible for the user to have a comfortable experience.

2. Look at the coating and valve core. Under normal circumstances, the brighter and more delicate the surface of the shower, the better the coating process. The high-quality shower uses high-quality ceramic valve core, which has high hardness and wear resistance, and is not easy to drip. The rotating adjustment handle is also very smooth.

3. Everyone knows that if the shower is used for a long time, there will be scale and impurities deposits, which will block the water outlet. If the mesh cover cannot be cleaned, the shower will not discharge water normally; in order to avoid the blockage of the water outlet due to poor water quality. All the shower nozzles should stick out for easy cleaning.

4. Shower accessories will directly affect the comfort of our shower. This cannot be ignored. For example, whether the lifting rod of the shower is flexible. Whether the shower joint is equipped with anti-twist ball bearings. Whether there is a rotation controller on the lifting rod, etc.

5. The water-saving function of the shower is the key point to be considered when purchasing the shower. Some showers use a steel ball valve core, and are equipped with a hot water controller, which can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. This type of shower with a reasonable design saves 50% of water compared to ordinary showers.

Installation Precautions

1. Do a good job of cleaning up during installation, especially the valve core. During the decoration, it is inevitable that decoration dust or even large particles of impurities enter the water supply pipe. If it is not cleaned up, these impurity particles will enter the valve core of the shower faucet, easily causing blockage or even destroying the internal structure of the valve core. If the shower has little water output, it is very likely that the cleaning work is not in place.

 

2. To ensure safety, equipotential terminals are indispensable.

An electric shock prevention system is indispensable in the bathroom: equipotential terminal. After all, compared with other spaces, the bathroom is accompanied by water all the year round, and the risk is relatively high. Connect with the equipotential terminal to prevent leakage, electric shock, and avoid dangerous situations.

 

There are a large number of shower options. So everyone can try to choose different showers. Traditional showers have gradually been eliminated. We must learn to keep up with the trend in renovation project.

Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers. The products include faucets, sinks, basins,

bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.

Look forward to cooperating with you.

Thanks a lot!

Some faucets are used two or three years, and the water flow is intermittent or rusted into green. The handle is hard to be used for opening and closing. The size of the water flow depends on luck.

Some faucets have been used for 20 years, and the surface is still as smooth as new. The feel when adjusting the angle of the handle is still as silky as the chopsticks in a honey jar. The speed of the water flow are still adjusted as you like. So how can we pick a faucet that can last 20 or 30 years or more?

First, the kitchen faucet can be rotated 360°.

For ease of use, the kitchen faucet should be taller, and the spout should also be very long. It is best to extend above the drain and not splash water. If there is a hot water line in the kitchen, this type of faucet should also contain hot and cold hoses. In order to meet various needs, most of the kitchen faucets can rotate the body of the faucet left and right. The sprayer part of some faucet can be pulled out, which is convenient for cleaning to all corners of the sink.

 

Second, if the budget is enough, the material of stainless steel is preferred.

The material of kitchen faucet is generally brass, which is the most common faucet on the market. However. Due to the characteristics of the kitchen environment, pure brass faucets are not necessarily the best choice. All pure brass faucets have electroplating on the outermost layer, and the function of electroplating is to prevent corrosion and rust of the brass inside. There is a lot of oily smoke in the kitchen, and the greasy hands and cleaners on the hands when washing the dishes make it often necessary to clean the faucet. If you do not use the correct way to clean, it is likely to damage the electroplating layer of the faucet, causing the faucet to be corroded and rusted. If you want to choose an all-brass kitchen faucet, you must be sure to have excellent electroplating, otherwise it will easily cause the faucet to rust and corrode.

And now some manufacturers use high-quality 304 stainless steel to make faucets. Compared with pure brass faucets, faucets made of high-quality stainless steel are free of lead, acid, alkali, corrosion, and harmful substances, and will not pollute tap water. This is very important for drinking water in the kitchen; and the stainless steel faucet does not need electroplating, it is extremely difficult to rust, and the hardness and toughness are more than twice higher than that of brass products, so it is very convenient to clean. However, due to the high difficulty of stainless steel processing, the current high-quality stainless steel faucets are usually relatively expensive.

 

Third, pay attention to whether the length of the tap can clean the sinks on both sides.

When buying, pay attention to the length of the basin and the faucet sprayer. If it is a double sink, pay attention to whether the length of the faucet can clean the sinks on both sides when rotating. Most kitchen faucets can rotate the body of the faucet left and right, which is convenient for cleaning to all corners of the sink.

Let there be a lot of things outside, leave a corner quietly in the room. 

Under the dim sky, admire the bright moon. 

Talk about the wonderful life with your lover. 

Continue the romantic vow of "hold your hand, grow old with you".

Enjoy every inch comfortable cozy time with your heart.

Shakespeare wrote: "There are a thousand Hamlets in a thousand people's eyes." There are also a thousand homes in a thousand people's eyes. So what are the home design styles that current couples love? How to create a sense of happiness at home in the two-person world?

Choose Home Style:

01 Simple Style 

The world of young people is always simple and beautiful. The simple style is not only the simplification of design elements, but also the serenity, comfort and warmth of a two-person home.

02 Modern Style 

Sweet time is always quiet and happy. The modern style pursues the practicality and flexibility of the space. Through the mutual penetration of functional spaces, and the transparency of simple wide areas, it can give romantic couples more practical applicability.

03 Nordic Style 

The romantic two-person world is always sweet and warm. The Nordic style with logs and white as the main colors, from layout planning to detailed experience, gives people a simple, fresh and natural feeling. It adds points to sweetness.

Use Decoration Skills:

As a two-person home, it is necessary to clarify the living requirements before decoration design. Do a good job of space planning. Increase the functional area as much as possible, and pay attention to the following two decoration tips:

01 Choose Light And Medium Colors To Extend The Space:

Choose bright colors in an exclusive space suitable for two people to live in. The visual sense will be strong. In terms of color, light tones and intermediate colors should be selected as the basic tone of furniture, bedspreads, sofas, and curtains, supplemented by low chroma space. Extend the space to form a warm home atmosphere.

02 Choose A Uniform Material:

The home for two embraces warmness and brightness. The color of the ground can be used in the color system with strong brightness and low purity. Use pebbles to make its own guiding line. In the flowing atmosphere of light and shadow, feel the quiet time between two people.

Create A Home Style That We Love

 

01 Living Room:

As the most functional area in the home, the living room can not only meet guests and friends, hold small family gatherings, but also entertain and relax the body and mind. Before decoration, you can use the open design to expand the space in the living room. If you seldom meet guests at home, you can also change the living room to a study room to create a small and flexible two-person world.

02 Bedroom:

One-third of a person’s life is spent in sleep. The bedroom of two people should be kept in a clean and tidy color, interspersed with delicate small objects. Create a romantic and warm atmosphere, so you can feel the pleasure and relax as soon as you enter the room.

 

03 Kitchen:

Japanese writer Yoshimoto once wrote in "The Kitchen": "In this world, I think my favorite place is the kitchen." The expectation of a better life in the couple's room has been witnessed by the kitchen. Even if the space in the house is small, a small round table can be placed next to the sofa, which is enough to make the most romantic dinner for two people.

 

04 Bathroom:

As a frequently used area in the home, the bathroom is small, but it is a very important part of the decoration. If the decoration design is not in place, it will affect the happiness of family living. Therefore, before the decoration design, while focusing on individualized and practical design, it is also necessary to control all the details of the bathroom to prevent the lovers' daily life from being affected.

Recommend 1: Black Shower Head and Handle Set

A shower helps you wash away the exhaustion caused by a busy day’s work. While getting rid of the fluctuating water flow, enjoy a new comfortable shower experience. Let your body and mind get a great relaxation and rest. The water flow is smooth and not easy to be blocked, bringing a more hearty shower experience. The unique in-wall waterway design, simple silicone surface, and smooth lines make people feel friendly and comfortable, and also increase the overall beauty and sense of space.

Recommendation 2: Bathtub

 

At the end of a day's work, go home and soak in a comfortable hot bath. Lazy, relaxed and at ease. But many can't pick a bathtub, and worry about wasting space and interfering with the normal use of other bathroom functions. Don't panic. Aquacubic can help. A variety of product specifications can meet different needs. The soft arc, elegant design, and unique color matching enhance the fashion sense and decorative effect of the entire bathroom. The pure white color satisfies the sense of cleanliness. Enjoy the clean experience easily. When you take a bath, you can enjoy the moment of immersing your body in warm water, relieve fatigue and decompression, which greatly satisfies the lovers' pursuit of high-quality life.

 

Practical and comfortable household products simplify the steps of life, improve the quality of life, and enhance the sense of happiness in life. Work with Aquacubic to create a sweet and warm home for two people, enjoy the love and care given to each other, and let the love heat up.

As a manufacturer of sanitary products for more than 11 years, we have seen many customers whose bathrooms are really full of functions. Although it is small, the functions are still very diverse. Have to admire!

 

Modern decoration requires both practical functions and individual style, so the budget is often difficult to control. The bathroom space usage rate is high. If you can save it everywhere, rework and repair will occur, and the gains will outweigh the losses. At the same time, the cost of furniture and decoration can also be spent more or less. The following are some small details on the bathroom decoration, which can save costs time and time again!

 

1) Waterproofing is essential for walls. 

Waterproofing in the bathroom is very important, not only to choose high-quality materials, but also to ensure professional painting. The wall waterproof in the wet area should be at least 180cm above the ground and 50cm for other places. The ground waterproofing generally needs to be brushed twice and a 24-hour closed water test should be carried out. Wall corners, water pipes, etc. should also be carefully done.

 

Ceramic tiles are the highlight of bathroom decoration. And the wall area is large. You can choose relatively economical tiles to ensure the waterproof performance. You can also directly paint with waterproof paint where it is not in the shower area. It will reduce cost.

 

Mosaics with rich patterns can enhance the visual aesthetics of the space. And to reduce material costs and manual laying costs, mosaics can be laid only on key positions. Tiles, waist line and top line can be selected according to your own needs to control the cost of decoration.

The original light-body wall is removed and replaced with a transparent glass wall, which expands the visual area of the space and also saves costs.

 

Mosaic paving requires a high labor cost, so you can find a large mosaic-like wall tile to pave the wall, which can save a lot of money. Since there are fewer gaps between large-size mosaic tiles, the amount of caulking agent is correspondingly reduced, which is often used for reference and selection in home decoration.

 

2) The floor area should be beautiful and non-slip.

Safety should be placed in the most important position, and slip resistance should be considered in the selection of floor tiles. At the same time, the human body will directly touch the ground, so the quality of materials should be paid attention to. Bright floor tiles are relatively slippery, so use them as little as possible in the bathroom, and use matte floor tiles or tiles with good anti-slip properties.

 

When paving the floor tiles, the slope must be appropriate, and the floor drain must be the lowest point so that the water can flow smoothly. The floor tiles should be made of whole tiles as much as possible, and the gap between the tiles should be controlled at about 2mm.

 

The area of decorative tiles on the ground is smaller than that of the wall. The use of interval paving can save the budget, and only use the same pattern of tiles to be separated by more than one tile.

 

If you want to create a low-cost bathroom with a natural texture, you can use wood-grain tiles instead of waterproof solid wood, which also has the characteristics of natural patterns, elegant colors, and easier matching with other sanitary wares.

 

Paving decal tiles in the bathroom can improve the monotonous bathroom style. In the actual construction process, the cost of laying decal tiles is much cheaper than mosaic.

 

When special-shaped handmade tiles are laid on the ground, they should be from the inside out, the gap between the tiles should be controlled within 8mm, and the height of the caulking agent should be level with the tiles. The paving of this kind of tiles should be carried out in sequence according to the serial number on the back to avoid waste caused by rework.

 

3) Cleverly arrange the exposed and concealed sanitary ware. 

The bathroom is a place where multiple channels of water and electricity converge. In the early stage of renovation, it is necessary to choose quality water pipes, wires, etc. And the wiring must comply with the regulations to avoid water leakage due to design and material selection problems.

As the space expands and functions increase, there are more and more electrical appliances in the bathroom. If you want to install smart toilet lids, integral shower rooms, massage bathtubs, multi-functional bathroom cabinets, etc., you must first make the sockets during the decoration to avoid rewiring in the future and increase the trouble.

 

The plumbing renovation of the bathroom is most laborious. If you want to save this part of the cost, the pipeline must be open-lined, without slotting, and future maintenance can also save a lot of costs.

In addition, avoid excessive wiring when rebuilding waterways and circuits. Use multi-hole sockets as much as possible on the panel of the socket. Under the premise of the same number of wires, you can plug in more electrical appliances. The wiring of the space is reconstructed with open wires, and the wires are routed from the top. The outer wall of the pipe is painted with waterproof paint, which saves a lot of labor costs and is also convenient for maintenance.

 

The bathrooms are uniformly decorated in black and white tones, simple and generous. The upper and lower water pipes of the sanitary ware are made of metal material, which has a long service life and is not easy to be damaged.

 

The space matching has been cleverly designed. The cement wall is matched with solid wood floor tiles, which is elegant and warm, satisfying practical functions and beautiful.

 

4) Shower Area

The quality of the glass used in the shower room is closely related to the safety of the bathroom. Fine tempered glass is generally difficult to break, and it will not hurt people when broken. Therefore, when choosing, don't be greedy for temporary cheapness, and try to choose high-quality, well-reputed brands.

The frame of the shower room is usually made of aluminum alloy, and the surface is sprayed with plastic, so it is not corroded or rusty. The thickness of the main frame aluminum alloy is preferably 1.1mm or more, which is not easy to deform.

 

In addition to professional brand shower rooms, the shower area can also be separated from dry and wet areas with various partitions. Common glass partitions only need to be installed on one side when combined with the wall, which saves costs by using less materials.

At the same time, the installation of the shower room can be omitted. The base of the shower room mainly plays the role of heat preservation and drainage, and the material is mostly acrylic.

 

The shower area is separated by a glass wall, and the ground is transitioned by steps to create a semi-enclosed shower space. The glass partition is directly fixed with hardware without reaching the top, which gives the space better permeability.

 

A wall serves as a partition, separating the wash area from the shower area. The interior of the wash area is covered with ceramic tiles, the exterior is painted with waterproof paint, and the key parts are strengthened.

 

5) Wash Area 

The floor drain is most commonly used for sink, and the wall mount type can be used for more advanced spaces. It is best to have all S-bends to prevent upward odor. Basins are divided into above-counter basins, under-counter basins and wall-mounted basins. Above counter basins for households are more suitable and easy to install. The under counter basin is suitable for a large area bathroom, and the installation is relatively complicated.

 

Small-space or low-budget families can abandon the overall bathroom cabinet, and use a transparent iron frame to save space and leave more space for the legs. Mirror cabinets and recessed cabinets are more suitable for small spaces and complete the storage function of the bathroom. To reduce the cost of decoration, you can choose a single color and simple style in the decoration, and match it with retro copper-colored, metal-colored faucets or mirror lights to create highlights.

 

Build the washstand with cement, and place storage baskets underneath. The wall-mounted faucet is highly decorative, but the size must be measured accurately in advance, otherwise it cannot be installed, which will affect the use.

 

There is no special furniture under the basin; only metal racks are used to save costs and place toiletries.

 

Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We have rich experience and passion in bath and kitchen industry and appreciate your contacting and business. Look forward to cooperating with you. Thanks a lot!

The sink is the most important part for kitchen decoration. When cooking and washing dishes, 65% of the time is spent dealing with the sink. If you choose the wrong one and want to change, the countertops and cabinets will be changed accordingly, and you will regret it by then.

There are so many sinks, which one to choose without regret?

We summarized the advantages and disadvantages of the sink materials on the market, the experience of using single and double bowls, and the precautions for installation. Let you never make mistakes in the sink when decorating the kitchen.

 

Which is better for the sink material?

Common sink materials include stone, stainless steel, ceramics, etc.

 

Artificial Stone:

Advantages: good cleaning, seamless docking, various colors.

Disadvantages: the texture is not as hard as steel.

 

Many people say that the artificial stone large single bowl sink is easy to use. The capacity is large enough, comes with various drain racks, not afraid of scalding, and will not stain. Simply clean it for 2 minutes a day and it will be shining. If the countertop material is acrylic or quartz, it can be seamlessly connected, and there will be no annoying, moldy silica gel.

 

Granite:

Advantages: strong, scratch-resistant, wear-resistant, and high-temperature resistant.

Disadvantages: easy to scratch pots, bowls and tableware; need to clean up every day.

 

Granite is also a kind of stone, and it also has the characteristics of high hardness, wear resistance and high temperature resistance.

However, there are many disadvantages of granite. Because of its high hardness, if you drop porcelain utensils, they will break for sure.

Because it is super abrasion-resistant, to the degree of sharpening the knife, be careful when washing pots with paint on the surface. The sink can scratch the paint!

 

The stone has the characteristics of easy bleeding, especially when the sink has cracks. The colored liquid can easily penetrate into the stone. Colored liquids like soy sauce or corrosive liquids such as vinegar must not be poured into it, otherwise just wait for the dyeing later. It will cause big trouble in dish washing.

The most important point is that the stone breeds microorganisms at a super fast speed, so you have to wipe it every day like the bathtub!

 

Stainless Steel:

Advantages: anti-oil, anti-fouling, not afraid of acid and alkali, affordable, strong and flexible.

Disadvantages: prone to scratches and water stains (brushed stainless steel will be better).

 

Stainless steel has the characteristics of oil and dirt resistance, and because of its low hardness and easy processing, it has a variety of shapes. Many sinks are now integrally formed. A sink is stamped directly from one steel plate, which greatly saves production costs. Stainless steel is suitable for most families.

 

It is very important to choose a brushed matte surface, which is both dirt-resistant and wear-resistant. Imagine the water stains, handprints, and scratches left by washing dishes and pots after using the shiny polished stainless steel several times. It is simply horrible. The stainless steel sink of good quality has a uniform and fine brushed texture, and it feels very smooth, so that the oil can flow smoothly and will not remain. The inner corner of the sink should be rounded so that it will not hide dirt. To choose stainless steel, you must look for the SUS304 mark, and only the real 304 stainless steel can have quality assurance.

 

Porcelain:

Advantages: strong, acid and alkali resistant.

Disadvantages: heavier, easy to break, difficult to clean oil stains.

 

The biggest advantage of the ceramic sink is its good-looking appearance. Ceramic sinks are heavier than stainless steel sinks and lighter than stone sinks. The weight is relatively heavy, and it has an apron front, so installation is very laborious. And one of the most criticized aspects is that ceramics have a kind of adsorption ability for oil. If it is not cleaned for a while, the upper edge will become dirty. And it is also very laborious to clean.

But it's really beautiful.

 

Single Bowl or Double Bowl ?

Single bowl or double bowl, this is a topic that everyone is arguing about when choosing a sink. After reading the following analysis, you will probably know what suits you.

 

Single Bowl:

Advantages: easy to put in a large pot.

Disadvantages: ordinary faucet can not clean the entire sink(can be equipped with pull-down faucet); function is not partitioned (can be equipped with mobile sink).

 

There are so many fans for the big single bowl, because it is big and deep enough that a large wok can be stuffed. With a pull-out faucet, you can clean every corner of the sink.

Large single bowl generally refers to a bowl with a length more than 60cm and a width more than 42cm, otherwise it is a small single bowl.

 

However, a large single bowl is more suitable for a kitchen with an area larger than 4 square meters, and a small single bowl can only be selected for a kitchen with a small countertop.

Most of the sinks on the market are sold in sets. Many sink sets include accessories and gadgets. Although these accessories and gadgets are gimmicks under the guise of "giving away", they are actually added value of the sink. With them, the function of the sink can be more perfect.

 

For example, a rectangular colander can hold dishes, vegetables, etc. The drain holes are evenly distributed and can drain water quickly.

 

Some large single bowl sinks are also equipped with a hidden knife holder, which is more convenient and safe.

 

Double Bowl:

Advantages: double bowls, double functions.

Disadvantages: A single bowl is relatively small and can't hold large items.

 

Large double bowls can also hold large pots as long as the volume of the bowl is large enough. Can achieve the function of a large single bowl. The small bowl is used for water filtration, or install a water drying rack to wash fruits and vegetables.

 

The small double bowl is a bit inferior and can’t hold a wok or the like, but it’s still very convenient to have two bowls. The use of dual bowls saves time and effort and improves efficiency.

The double bowl originally has more functions than the single bowl, because most large double bowls will have accessories such as colanders and drying racks. It can be used in partitions, which is unmatched by a single bowl.

 

When washing vegetables, pots and pans, you can separate the two to avoid greasy vegetables. It can also be used separately when washing pots and pans alone. One sink for washing and one sink for draining water. And it can also save water.

 

One bowl for washing fruits and vegetables, and the other for washing dishes. 

 

The length of the double bowl is generally about 80cm. If the length of the counter is longer than 1.2 meters, double bowl can be installed. Many double bowls are designed as one big and one small. If you want to put the wok, the length of the large bowl should be more than 35cm, because the size of the wok is generally between 28cm-34cm. The disadvantage of the double bowl is that the sewer pipe is more complicated, and it is more prone to blockage and water leakage.

Therefore, if you choose a double bowl, it is necessary to buy a good strainer. If the inner wall of the drain is smooth, it is not easy to block. Some double bowls are equipped with threaded drain pipes, or relatively thin drain pipes, which tend to retain oil and cause unpleasant odors.

 

Above counter sink, under counter sink or one-piece sink?

Above Counter Sink:

All the edges of the sink are exposed on the countertop.

The cleaning of the above counter sink is very inconvenient. Over time, the glass glue on the edge of the sink will easily become moldy and black. The picture below may cause emotional upset, but the reality is always so cruel!

 

But its benefits are also very obvious, easy to install and cheap. And because edges are over the counter, the bearing capacity is very good. In case it is really disgusting one day and we can't stand it anymore, it can be easily removed as a whole. The space under the above counter sink is about 3 cm higher than the under counter sink. What does this show? It means that there is a large space under the sink for storage!

 

Under Counter Sink:

One wipe, everything is gone. The under counter sink is lower than the countertop. The water, residues, and vegetable leaves on the countertop will be in the sink with a single wipe. Super convenient. Generally speaking, the under counter sink is quite easy to clean. And it is very beautiful.

 

However, the installation of the under-counter sink is also more complicated. Not only do you have to prepare more installation costs, you also need to remind the decoration workers. Otherwise, it will generally be installed as an above counter sink.

 

In addition, once the under counter sink is damaged, it cannot be repaired and needs to be replaced as a whole. If the under-counter sink is used for a long time, the cracks will be moldy, so the mold-proof glue should be used between the under-counter sink and the countertop.

 

One-piece Sink:

Finally, the one-piece sink. One-piece sink refers to a sink that is an integral part of the countertop. It usually appears in the overall cabinet, and the countertop and the sink are seamlessly connected. The advantage is that there are no gaps, there is no need to worry about mold, and it is really easy to clean up. The disadvantage is that it is very troublesome to replace, which is equivalent to dismantling the entire counter.

 

In short, whether it is stone, stainless steel, or ceramics, whether it is a single sink or a double sink, it depends on the situation of your own house. As long as you choose the right material, bowl size and quantity, installation style, you can choose the best sink for your home.

Product Diversification

At present, the concept of sanitary ware products has far exceeded the traditional concepts of the past. As a symbol of modern and luxurious life, it has entered all aspects of people's lives. That is, it not only has sanitation and cleaning functions, but also includes health care functions, visual enjoyment, and entertainment functions. The shape of sanitary ware products has appeared in one-piece type, basin series, bidet, or table-top series, etc. In recent years, sanitary ware products have also launched a series of complementary products with additional functions such as leisurely bathtubs, cabinet basins, and steam shower rooms. Therefore, in the future, it is self-evident that the sanitary ware market will show a diversified development trend.

Build A Complete Accessory Manufacturing Base

Now due to the increase and enrichment of new functions of sanitary ware products, the sanitary ware production of developed countries has been involved in a large number of accessories.

Therefore, a mature sanitary ware industry should be supported by more varieties of accessories and additional products. For example, the production of raw materials, glazes, pigments, models, machining, instruments, meters, copper work, and packaging and decoration materials that are closely connected with many sanitary ware production systems should be incorporated into the entire production system as soon as possible. The sanitary ware production industry in China urgently needs to form a complete industry group and supporting group related to sanitary ceramic production, and form a processing base for various related accessories that are compatible with the end products.

The Comprehensive Functions of The Product Are More Prominent

According to the shopping psychology of consumers in the international market, a good sanitary ware product must be able to satisfy a modern lifestyle and have a relatively complete set of functions. For example, in addition to satisfying the use function, it also needs to solve multiple functions such as water saving, energy saving, environmental protection, comfort, health care, anti-aging, and intelligent induction, and has obvious recyclability and a strong concept of green consumption. This requires a new generation of products that must be able to make full use of comprehensive high-tech achievements such as biotechnology, electronic technology, and induction technology to combine various new functions to improve the comprehensive functions and physical quality of sanitary ceramic products.

Rich Decorative Colors

In the past, sanitary ware products were often decorated with white glaze to show their white jade-like appearance. But the cool tone of its color makes many people feel uncomfortable. Nowadays, it is generally recognized that various opalescent white glazes are mainly used for the appearance of products with other colors and shades. China sanitary ware factories should use the coordination of various glazes to create a variety of popular new decorative colors. The changing rhythm of sanitary ware products, just like the promotion of popular colors in major international clothing exhibitions in the world every year, shows the visual function of leading new trends in colors from time to time. With the continuous updating of people's aesthetic perspectives and the rapid changes in domestic and foreign market demands, it is necessary to accelerate the development of a new generation of glaze decoration varieties and strengthen the new color decoration of products.

 

In short, China sanitary ware factories must continuously improve the technical content of export products, and continue to improve the grade and added value of export products. Continuously develop a new generation of new high-end products to meet the needs of domestic and foreign markets. It is conducive to entering the international high-end market. It is believed that China sanitary ware factories will become stronger.

Bathroom Faucets Industrial Style, Brass Basin Faucets Single Hole Single Handle, Deck Mounted Cold and Hot Water Mixer Faucet, Vessel Sink Faucet 2

Drop In Kitchen Sink Workstation Single Bowl Kitchen Topmount Sink Suitable As Topmount And Undermount Kitchen Sink For Kitchen Yard Office Bar (Color : Black, Size : 75x45CM) Brand: HYXSHOP ￡52830 Size Name: 75x45CM 60x45CM 65x45CM 68x45CM 72x45CM 75x45CM Colour Name: Black About this item

Black Stainless steel Single Bowl Topmount Kitchen Sink Model: ACS3322A2TB Brand: …

Wholesale Distributor of Plastic Bathroom Stool - Plastic Bath Stool offered by Star Plastics, Madurai, Tamil Nadu. IndiaMART Get Best Price X Star Plastics Othaveedu Vandiyu, Madurai, Tamil Nadu

Polished Nickel Pot Fillers Kitchen Faucets 68 Results Recommended Sort by Finish: Polished Nickel Type: Pot Fillers Sale 3 Colors Concord Pot Filler by Kingston Brass From

8/3/2021· Step A: Preparing the ceramic sink To make sure that repairs have the best chance of sticking. You can use a drill to enlarge the crack and grind down the edges. This serves two methods. Firstly, it smooths down the sides carefully. Then, removing any sharp edges because the ceramic sink can give you a nasty nick if there is an edge.

include a base plate and connection fittings. Mixers

Kingston Brass Cross Handle Satin Nickel Bathroom Wall Mount Faucet KS3128AX. Kingston Concord Chrome Single Handle Wall-Mount Vessel Sink Faucet KS8111DL. Kingston Concord Polished Brass 1 Hdl Wall-Mount Vessel Sink Faucet KS8112DL. Concord Oil Rubbed Bronze Single Handle Wall Mount Vessel Sink Faucet KS8115DL.