Basin Swivel Pull Down Faucet- Factory Manufacturers Suppliers From China

The bathroom area is small, but it needs to be equipped with sinks, cabinets, washing machines, showers and toilets. There is a new way by changing the water route in advance to move the basin outside the bathroom!

Simplify the Bathroom

If you want the washbasin to be outside the bathroom, the most feasible way is to move the door of the bathroom inward to ensure the privacy of the toilet and bathing area.

This approach is actually the traditional "dry-wet separation".

But the difference is that the original washroom door does not need to be installed, and the basin area and the outer area are more integrated.

 

A sliding door can be installed between the toilet & the shower area and basin, or a specially customized water resistant door. The floor tiles at the basin area can be designed as a unified design with the outside of the bathroom.

 

The laundry area and the basin are integrated on the outside, because it is not afraid of moisture, the towel basket does not need to be stuffed in the cabinet.

The overall space has not become more crowded by adding walls. Entering the door, the bathtub and shower head are immediately visible and easy to use.

 

Generally, ultra-thin lightweight partition walls are used, and waterproof coatings are also applied, so there is no need to worry about the partition walls being too thick or not moisture-proof.

Move the basin outside the door

 

The size and layout of the bathroom are not satisfactory, so let the washbasin truly stand outside the bathroom door!

Where should I install the basin outside the bathroom door?

First of all, it is recommended to be as close as possible to the original sink drain pipe, which is convenient for construction and saves labor and money.

 

Secondly, consider the habit of daily use of basins. For example, every morning, if you and your family can't wash and go to the toilet at the same time, put the basin near the bedroom.

You can brush your teeth and wash your face when you get up in the morning and go out.

 

If there is a corridor end or a concave wall near the toilet, it is most suitable to install the sink cabinet.

But it doesn't matter if there is no concave wall, self-built partitions are equally beautiful. 

The lockers for bathing products can be placed above the basin together. In this way, the remodeled bathroom will be more refreshing and easy to take care of.

 

The wash basin can be placed on the balcony.

The wash basin is placed on the balcony because it does not occupy the kitchen and bathroom space, and it is convenient to dry the towels after washing.

Now that the water pipe has been connected to the balcony, you can also plan a good-looking basin. In addition to washing, water for watering flowers and boiling water can be obtained here.

 

For a family with one bathroom but three generations living together, one more basin can reduce a lot of inconvenience in life.

Make a simple-style balcony hand-washing area. It’s more convenient to wash your hands and fruits now.

Wash basins can be hung on the wall. 

The washbasin can also be hung on the wall to play its function, but it will involve all kinds of wall drilling. And it can’t be moved after it’s built, so consider carefully before decorating it.

The best place to put a basin in the bedroom.

The cosmetic storage cabinet can be installed under the basin. Daily skin care, makeup, and makeup removal can be done easily.

 

If the toilet is close to the hallway, install a basin beside the hallway to enrich the functions of the hallway.

 

The dining room can also be equipped with an independent basin, and the water pipe can be taken from the kitchen at the beginning of the decoration.

 

Installing the basin outside the bathroom, in addition to being practical and convenient, can also match the overall style of the home. The washbasin can be integrated into the design of the cabinet, and the surrounding waterproof treatment should be done.

Ordinary sink, also known as drawn sink, is formed by pressing and stretching a whole piece of steel plate.

The principle is similar to balloon blowing, so the bottom and corner of the water sink will be thinned properly, 

usually made of 0.8mm thick steel.

The Handmade Sink is not made piece by piece by hand, but made by cutting, bending and laser welding the steel plate.

Will not change the thickness of the steel plate in the corner, the sink is very sturdy and solid. Usually this thickness is 1.2-1.5mm.

The appearance has strong sense of line, and the weight is much heavier.

The small R angle of handmade sink is not only better in appearance, but also higher in the utilization of the whole sink space.

1. X Grooves Design

Optimized bottom slope makes kitchen sink draining faster than normal sinks. Gently sloped bottom, fast draining and dry after using.

Handmade X grooves design, not only increase the design aesthetic but also easy to drain water in a minute.

Rear set 3.5”drain matches most kitchen appliances and fits the most Common Garbage Disposal System and unlocks extra space.

2. Nano Surface Technology

Nano surface as Lotus leaf. Water and oil flow quickly and no trace left.

Hardness of Nano surface: ＞8H Hardness of regular surface: ＞4.5H

Extreme craftsmanship focuses on every detail of the sink.  Meets the UPC, cUPC, CE certification standards.

3. POSCO 304 SUS Material

Durable scratch and stain resistant stainless steel surface helps the beauty last.

Real 16 / 18 gauge material; never chip or crack. Commercial grade satin finish. Thick 304 Stainless Steel construction.

9 - 10 inches deep large sink can hold a lot of pots and pans. Experience the luxury brought by the global high-end manufacturing industry.

4. Soundproof Pad - 7pcs

Extra-thick coating and thick sound rubber pad assure exceptional noise reduction.

Insulative padding can dramatically reduce the noise causing by water dripping,making an excellent effect on noise elimination.

It can enhance the elegance and high quality of the kitchen, and it will become the focus of your kitchen. The high quality of the sink is praised and recognized by the most demanding customers

Product Diversification

At present, the concept of sanitary ware products has far exceeded the traditional concepts of the past. As a symbol of modern and luxurious life, it has entered all aspects of people's lives. That is, it not only has sanitation and cleaning functions, but also includes health care functions, visual enjoyment, and entertainment functions. The shape of sanitary ware products has appeared in one-piece type, basin series, bidet, or table-top series, etc. In recent years, sanitary ware products have also launched a series of complementary products with additional functions such as leisurely bathtubs, cabinet basins, and steam shower rooms. Therefore, in the future, it is self-evident that the sanitary ware market will show a diversified development trend.

Build A Complete Accessory Manufacturing Base

Now due to the increase and enrichment of new functions of sanitary ware products, the sanitary ware production of developed countries has been involved in a large number of accessories.

Therefore, a mature sanitary ware industry should be supported by more varieties of accessories and additional products. For example, the production of raw materials, glazes, pigments, models, machining, instruments, meters, copper work, and packaging and decoration materials that are closely connected with many sanitary ware production systems should be incorporated into the entire production system as soon as possible. The sanitary ware production industry in China urgently needs to form a complete industry group and supporting group related to sanitary ceramic production, and form a processing base for various related accessories that are compatible with the end products.

The Comprehensive Functions of The Product Are More Prominent

According to the shopping psychology of consumers in the international market, a good sanitary ware product must be able to satisfy a modern lifestyle and have a relatively complete set of functions. For example, in addition to satisfying the use function, it also needs to solve multiple functions such as water saving, energy saving, environmental protection, comfort, health care, anti-aging, and intelligent induction, and has obvious recyclability and a strong concept of green consumption. This requires a new generation of products that must be able to make full use of comprehensive high-tech achievements such as biotechnology, electronic technology, and induction technology to combine various new functions to improve the comprehensive functions and physical quality of sanitary ceramic products.

Rich Decorative Colors

In the past, sanitary ware products were often decorated with white glaze to show their white jade-like appearance. But the cool tone of its color makes many people feel uncomfortable. Nowadays, it is generally recognized that various opalescent white glazes are mainly used for the appearance of products with other colors and shades. China sanitary ware factories should use the coordination of various glazes to create a variety of popular new decorative colors. The changing rhythm of sanitary ware products, just like the promotion of popular colors in major international clothing exhibitions in the world every year, shows the visual function of leading new trends in colors from time to time. With the continuous updating of people's aesthetic perspectives and the rapid changes in domestic and foreign market demands, it is necessary to accelerate the development of a new generation of glaze decoration varieties and strengthen the new color decoration of products.

 

In short, China sanitary ware factories must continuously improve the technical content of export products, and continue to improve the grade and added value of export products. Continuously develop a new generation of new high-end products to meet the needs of domestic and foreign markets. It is conducive to entering the international high-end market. It is believed that China sanitary ware factories will become stronger.

Speaking of bathroom, the first thing many people think of is that we must separate wet and dry functions. After all, the traditional integrated type is too inconvenient to use. The bathroom is always wet, and even the towels have a musty smell. With the improvement of people's living standards, more and more people hope that the bathroom can be truly hygienic.

 

Three-way separation, that is, the basin area, shower area and toilet area are completely separated.

Advantages of three-way separation:

First, each washing area is an independent space, ensuring privacy while isolating smell and humidity;

Second, improve safety, especially for families with the elderly and children, and reduce the possibility of slipping due to water in the bathroom;

Third, ensure the cleanliness of the bathroom, and extend the service life.

 

How to create a three-way separation for a 3 square meter bathroom?

 

Square Layout

As soon as you enter the room, it is the washing area, which is the most frequently used area in the entire bathroom, so placing it at the door does not affect the use of other areas.

 

The middle position is the toilet area. The small toilet is separated by a baffle to form an independent space. If you feel that it is not private enough, you can install a small shower curtain to completely separate the toilet area. This is generally not recommended. After all, it affects the appearance, and it also gives people the feeling of being cramped.

 

The square space uses all the walls. A few niches or horizontal partitions are placed on one end of the bathtub to hold bath towels and clothes. The bath area is designed in the innermost part, the edge of the bathtub itself is an isolation belt, and the shower head is installed on the wall at the other end of the bathtub, which is convenient and does not take up space.

 

Although the square space is not very easy to handle, it can be regarded as "excellent brushwork" through this elaborate design.

 

Rectangular Layout

Compared with a square bathroom, a rectangular space will make the best use of everything.

The same is the wash area next to the door. The difference is that the rectangular space also has a place to put the washing machine. When you take a shower, you can throw your clothes into the washing machine.

Placing the toilet and shower in parallel on the innermost side and covering the tub with a shower curtain.

 

The above are two designs of 3 square meters bathroom. Of course, there are more design styles, such as a sliding folding door instead of a shower curtain.

 

This folding door design not only saves space, but also has good privacy. Very practical. 

With some simple lighting, the bathroom can also be a beautiful scenery. 

The barn door design completely separates the bathroom area.

 

Bathtub

A small bathroom doesn't necessarily need a bathtub. But if removing the wall partition and replace it with a shower curtain, there will be  bathtub area.

Shower Room

The shower room can be placed in the triangular area at the corner of the bathroom to form a fan-shaped area, which is the most space-saving.

 

Toilet

It is best to use a small size. After all, if the toilet is too big, it doesn't seem to be of much use except for taking up space.

What are the precautions for the three-way separation?

 

Color Tone

Because the space is relatively small, the tones of the floor tiles and the walls should be matched reasonably. It is best to focus on warm colors, which are swelling colors. They have the effect of "expanding" the space.

 

Mirror

Try to choose a mirror as large as possible. The role of a large mirror is the same as the color tone, which increases the sense of space.

 

Storage

The corners must not be wasted. Simple wooden shelves and niches are good storage methods.

 

Ventilation

The last thing we must pay attention to is ventilation. It is important to reduce odors. 

1. Material:

The common faucet materials on the market today are: stainless steel, plastic, brass, zinc alloy faucet, etc. 

Brass:

Brass is the most common material for faucet manufacturing. It is made of international standard H59/H62 copper. The casting adopts steel mold for gravity casting, and its wall thickness is uniform, generally 2.5-3.0 mm. The faucet made of brass is characterized by: no rust, durability, anti-oxidation, and sterilization effect on water.

Zinc Alloy:

The density of zinc alloy is lower than that of copper, and the handle is lighter. The surface of zinc alloy is easy to oxidize from the inner wall, and white oxide powder will appear on the surface. The strength is much worse than that of copper. The service life is not long, and the lead content is high.  After one to two years, the faucet made of zinc alloy will oxidize and rot.

Plastics:

Plastic faucet has the characteristics of corrosion resistance, aging resistance, no rust, lead-free, non-toxic, odorless, high pressure resistance, light weight, easy construction, and low price. Plastic is not wear resistant.

Stainless Steel:

Now health and environmental protection has gradually become the new themes of modern life. Stainless steel is an internationally recognized healthy material that can be implanted into the human body. Therefore, kitchen and bathroom products with stainless steel as the main material have begun to become popular in European and American countries. 

More than 90% of high-end faucets are made of brass. Brass is the most suitable faucet material and has antibacterial effect. Among them, H59 copper is most used. Its lead content is qualified. H62 copper’s lead content is less and more corrosion-resistant. Although stainless steel can be lead-free, but the quality is worse than copper due to the complex process and no antibacterial performance.

2. Faucet Manufacturing Process:

Most of the faucets on the market under $20 are made of sand mold casting, which is commonly referred to as "sand foundry". The internal structure of the valve body metal is loose, and it is easy to form interior defects such as stomata. It may not be found in appearance. However, after a period of use, defects such as water leakage, inadequate sealing and even more severe defects will occur. High-grade faucets usually adopt gravity casting, and the internal structure of the valve body metal is dense. For the same valve body, the weight of the products produced by the two processes is different, and the consumption of materials is also different. The weight difference between gravity casting valve body and sand casting valve body is about 1/4. Therefore, the same product has different prices.

3. Cartridge:

The faucet is turned on and off every day. The cartridge determines the service life of the faucet. At present, ceramic is the most suitable material for home use. The high-end faucet cartridge mostly uses ceramic, which is durable and can be opened and closed for 500000 times without leakage.

 

4. Water Hose:

The water inlet hose of the high-end faucet adopts pure 304 stainless steel. 304 stainless steel can bear high water pressure and ensure water purity.

 

5. Aerator:

The aerator of high-end faucet can give users a very comfortable bathing feel. The use of these accessories and materials can ensure the quality of the product. And whether or not to use the NEOPERL aerator is an important factor in judging the quality of the faucet.

 

6. Surface Technology:

The electroplated surface of high-priced faucets usually has a mirror-like feel. When you press it with your finger, the traces of hand prints will disappear immediately. Moreover, advanced environmental protection electroplating technology can prevent secondary pollution of products and ensure the purity of water.

 

7. Service Life:

The quality of high-end faucets is still good after 5 years of use, and meet all the national water-saving requirements. The durability, water-saving and environmental protection are its highlight value. Cheap faucets have a very short service life. After two or three months of use, quality issue may occur. And their safety is low.

 

8. After-sale Warranty:

High-end faucets are produced by professional manufacturers with a comprehensive after-sales service system. No matter the product has an accident or failure, the manufacturer or distributor will be responsible for solving it at any time. The manufacturers that provides higher price products are mostly more qualified, and they are very concerned about sales and reputation generated by each product.

All Aquacubic products that are finished in the production department have to pass their inspection first. There will also be the special inspection personnel to conduct an additional inspection to ensure that every product delivered to consumers is qualified. 

For a more useful and faster-drying bathroom, toilet, shower, and washbasin must be separated.

The toilet, washbasin, and shower located in three areas allows people to use them separately.

 

This design has more advantages. 

1. Dry area always being dry.

Using a three-separated bathroom, when the shower is completely independent, the sink and toilet area will not be affected by the shower. Cleaning is also more convenient.

 

2. More people can use the bathroom at the same time.

In the morning some want to use the toilet and some want to brush their teeth. If there is no separation, as long as one person enters, the whole family will have to wait.

However, with the three-separated bathroom, everyone can save time and use separately.

 

Three-separated Bathroom Layout

If the bathroom is a long and narrow shape, it is recommended that the toilet, washbasin, and shower are arranged in a row.

Usually the most frequently used washbasin will be placed in the middle, so you can come in and use it at any time. To the left and right are the shower area and toilet.

The toilet and the shower area can also be arranged on the same side, and the washbasin is placed on the opposite side to form a T-shaped arrangement. Hotels often use this layout, which is relatively confidential, but does not waste space.

 

If you want to add a bathtub, because the bathtub is used less frequently, it is usually placed in the corner next to the washbasin.

 

But to be honest, the three-separated bathroom requires a relatively large area. The partition wall will be added, and the distance between the shower, toilet and washbasin will be increased. If three separations are used, it is bound to reduce the size of other spaces.

 

Design and Construction Considerations

1. The minimum shower area wide is 90cm.

The shower area should be kept wide enough for the person to turn around, and hands should not touch the wall easily when showering. It is convenient to have a width of at least 90 cm.

 

2. The toilet area is at least 70cm wide.

If you don't want it too narrow when going to the toilet, the wall should not be too close. Starting from the center of the toilet, leave a width of 35 cm or more to the left and right to make it easy to use.

The human action is to turn around and sit down on the toilet, so 60 cm of moving space is required in front of the toilet.

 

3. If the toilet is adjacent to the shower area, the water pipe is easy to install.

When the toilet and the shower area are adjacent to each other back to back, the pipeline can be hidden in the partition between the two, and the distance of the pipeline can be shortened.

 

4. There is no need to install a floor drain in the toilet and washing area.

Since the three-separated bathroom has completely separated the toilet, washbasin and shower, and now fewer people will flush the floor. Therefore, it is only necessary to install a floor drain in the shower room. Blocking with waterproof strips can ensure that the toilet and washbasin area remain dry. For floor cleaning in dry areas, it is recommended to wipe with a mop.

 

5. Reduce the area of waterproof coating.

Ordinary bathrooms are usually recommended to do waterproof layer on the walls and floors of the whole room due to the spread of moisture. However, in the three-separated bathroom, there will be no excess water vapor in the toilet and washbasin area. It is recommended to do waterproof only half-height walls.

 

Then we take a look at the examples of the three-separation bathroom.

 

U-shaped Layout

This is a typical hotel bathroom layout. The sink is in the center, and the toilet, shower area, and bathtub are placed on both sides, forming a U-shaped layout. Suitable for use in large-area bathrooms.

 

The doors of the shower room and toilet area are designed with metal mesh, which is ventilated and can be cleverly hidden.

 

The walls and floors of the whole room are paved with the same marble. With metal accessories, the overall style is particularly high-end.

 

One-line Layout

With the double washbasin design, two people wash at the same time without being crowded. With double-sided mirrors and wall lights on both sides, it forms a balanced and symmetrical design.

 

The retro tile floor, the decorative pillars on both sides of the countertop, the delicate and elegant chandeliers, the natural and romantic simple European style.

Off-white is selected as the main color of the space, matched with earth-colored walls. The calm atmosphere makes the bathing space more comfortable and relaxing.

 

If you don't make a door, just use cement partition to separate the shower area or toilet, which can reduce the visual barrier.

A sliding door is used between the shower area and the bathtub, which can be ventilated at any time and can achieve the effect of privacy.

Two-line Layout

The washbasin area is in a single row. Since it is isolated from the shower area, it is relatively dry. The dressing storage is also set together, making it easier to use.

The wash area is in line with the toilet area. The bathtub is next to the shower area. Effectively separate the dry and wet areas. At the same time, hooks are installed on the wall for the towels and bathrobes.

 

If the bathroom does not have a window, you may wish to use colors and lights to brighten it up. The orange half-wall design makes the space bright and vibrant. Place some flowers and plants to make it more vibrant.

The wall is made of cement gray, so even if water drops splash off, it will not leave a trace. The mirror cabinet on the top can effectively increase the storage capacity.

 

In order to leave the central aisle, move the sink outside. Arranging the shower area and the toilet back to back not only effectively shortens the length of the water pipe, but also makes the design more concise.

In a typical T-shaped layout, the shower area and toilet are hidden behind the washbasin to maintain privacy. The wash area divides the bathroom into two parts.

 

The entrance of the bathroom is designed with arches, and the retro red bricks are more antique. The tiled floor extends to the left and right.

 

After reading the above cases, do you think it is good-looking and practical?

 

Thanks for viewing our website. Hopefully you can find your interested items. Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business. We are one-stop supplier of bathroom and kitchen products.

As housing prices continue to rise, the pressure on young people to buy apartments is increasing. In order to be able to buy a new apartment as soon as possible, small-sized housing has become the choice of more young people. In this way, you can own a home of your own without too much financial pressure. Of course, homes can be small, but life must be exquisite. If you want a quality of life and a more comfortable living, you must spend more time and energy on decoration.

Choose a suitable decoration style, choose furniture with a variety of storage functions, make an overall plan for the space, and maximize the use of space. Small apartment houses can also enjoy exquisite and beautiful life! So when we are decorating, how do we make small-sized houses decorated both exquisitely and practically?

 

01 Principles of small apartment space planning

 

Although the space is small, the planning can not be less. When planning and designing, first of all we must plan and layout the space in a unified way. According to the family's living needs, different regional functions are clearly planned to meet the needs and quality of the whole family's life. Second, improve space efficiency. The overall layout of the room area should be reasonable. Try to reduce the aisle area and some shared area. For example, some non-load-bearing walls can be knocked down and replaced by glass walls. After meeting the basic functional needs of the family, the principles of economical and practical space decoration should be clarified. Avoid excessive decoration of the space, which not only reduces economic consumption, but also makes the sense of space larger, and also avoids air pollution caused by excessive decoration, which affects health. Finally, because our house is a small apartment, we should make full use of each space, not let go of any corner, and strive to maximize the actual use of space. We can not only make reasonable configuration in terms of plane layout, but also make full use of the facade space. In a limited space, create unlimited possibilities!

 

02 Five choices to maximize the space of a small apartment

 

In the specific decoration process of small apartments, first, it is recommended that the main color of the decoration can be white. White can make small apartments simple and generous. Because white visually makes the space more spacious, it also makes the space brighter. Second, if the height of the small apartment is not high enough, you can make good use of the ceiling. The color of the ceiling can be lighter than other walls. The color gap can obviously increase the height of the room and make the space feel larger. Third, to make the sense of space bigger, we must plan every piece of furniture in the room. Let them perform their duties and put them in the right place! And try to choose furniture with storage function, so that each space has a strong storage capacity. Avoid clutter in the room and free up more space for use. Fourth, for small apartments, the mirror is a perfect artifact. Use a mirror to extend your small apartment. For example, a mirror can be installed in the living room, ceiling, porch, and bathroom. The mirror is very practical and has the effect of expanding the vision. The reflected light source of the mirror can also make the room's daylighting stronger and the entire space more clear. Fifth, although the space of small-sized housing is relatively small, there are not few things that should be included in daily life. Therefore, the most important thing for a small apartment is to have a powerful storage function.

 

03 Tips for storage in different spaces

 

The storage in the kitchen is cabinets, wall cabinets and workstation, but the workstation in the small apartment kitchens are usually relatively small and can't hold too many things. If you put too many things, you may not have a place to cut vegetables during normal cooking. At this time, you can stick hooks, racks, etc. on the wall to place some items. In the living room, most young people now know that they can use the sofa background wall and the TV background wall for storage. It can not only save space, organize storage items, but also decorate the living room. In fact, the sofa is also a good storage point. Choose a sofa with a drawer cabinet. Although there is not much storage space, you can also put some relatively mini items, such as nail clippers, mobile phone holders, and game workstation. The bedroom is the most storage place for small apartment houses. Choosing a large wardrobe can meet most of the storage needs. Coupled with the combination of the bedside background wall cabinet and the bed bottom cabinet, basically everything can be stored. The bedroom is messy and the scene of clothes everywhere will never appear again. Of course, there is also the bathroom, which is the most frequently used place in daily life, but the space is small, and there are many and miscellaneous things. It is a headache to organize and organize. Therefore, in the early stage of the decoration, the bathroom space must be stored well.

 

04 Super bathroom storage rules

 

A small bathroom will need at least a washing area, a shower area, and sometimes even a laundry area, bathing area. The more functions, the more debris. All kinds of toiletries, skin care products, cosmetics, cleaning supplies, basins, dirty clothes, etc. must be piled up in the bathroom. There are always problems in life, but life will also give us some solutions. At this time, we can choose some suitable bathroom products, and then match some small storage pieces. Develop every corner of the bathroom, expand the space, and make the bathroom grow from small to large, clean and tidy!  

Aquacubic Has Rich Experience and Passion in Bath and Kitchen Industry. We can provide total solution for apartment projects.

Some faucets are used two or three years, and the water flow is intermittent or rusted into green. The handle is hard to be used for opening and closing. The size of the water flow depends on luck.

Some faucets have been used for 20 years, and the surface is still as smooth as new. The feel when adjusting the angle of the handle is still as silky as the chopsticks in a honey jar. The speed of the water flow are still adjusted as you like. So how can we pick a faucet that can last 20 or 30 years or more?

First, the kitchen faucet can be rotated 360°.

For ease of use, the kitchen faucet should be taller, and the spout should also be very long. It is best to extend above the drain and not splash water. If there is a hot water line in the kitchen, this type of faucet should also contain hot and cold hoses. In order to meet various needs, most of the kitchen faucets can rotate the body of the faucet left and right. The sprayer part of some faucet can be pulled out, which is convenient for cleaning to all corners of the sink.

 

Second, if the budget is enough, the material of stainless steel is preferred.

The material of kitchen faucet is generally brass, which is the most common faucet on the market. However. Due to the characteristics of the kitchen environment, pure brass faucets are not necessarily the best choice. All pure brass faucets have electroplating on the outermost layer, and the function of electroplating is to prevent corrosion and rust of the brass inside. There is a lot of oily smoke in the kitchen, and the greasy hands and cleaners on the hands when washing the dishes make it often necessary to clean the faucet. If you do not use the correct way to clean, it is likely to damage the electroplating layer of the faucet, causing the faucet to be corroded and rusted. If you want to choose an all-brass kitchen faucet, you must be sure to have excellent electroplating, otherwise it will easily cause the faucet to rust and corrode.

And now some manufacturers use high-quality 304 stainless steel to make faucets. Compared with pure brass faucets, faucets made of high-quality stainless steel are free of lead, acid, alkali, corrosion, and harmful substances, and will not pollute tap water. This is very important for drinking water in the kitchen; and the stainless steel faucet does not need electroplating, it is extremely difficult to rust, and the hardness and toughness are more than twice higher than that of brass products, so it is very convenient to clean. However, due to the high difficulty of stainless steel processing, the current high-quality stainless steel faucets are usually relatively expensive.

 

Third, pay attention to whether the length of the tap can clean the sinks on both sides.

When buying, pay attention to the length of the basin and the faucet sprayer. If it is a double sink, pay attention to whether the length of the faucet can clean the sinks on both sides when rotating. Most kitchen faucets can rotate the body of the faucet left and right, which is convenient for cleaning to all corners of the sink.

You can feel the quality of the faucet once you weigh it on your hand. This solid bridge …

Solid Brass Kitchen Wall Mount Pot Filler Faucet Swivel Spout Chrome Kitchen tap Two 360-degree rotating structures, Very wide range of activities.Passed 24h salt spray test, 200 hours neutral salt spray test, and pressure system test.Removable design; Air ...

304 Single Bowl NANO Color Kitchen Sink 304 Farmhouse Basket Strainer Kitchen Sink 304 Single Bowl Kitchen Farmhouse Sink 1.5 Silver Top Quaility Double Bowl Sink Stainless Steel Farmhouse 32 Inch Topmount Sink 32 Inch High Quality Stainless Steel Kitchen Sink Stainless Steel 550x450mm Single Bowl Topmount Sink

EXCEPTIONAL VALUE: Kitchen set includes sink, faucet, bottom grid (dishwasher-safe), drain assembly, removable drain cap, water supply lines, mounting hardware, and 2 cutout templates

mDesign Adjustable Kitchen Sink Dish Drying Mat/Grid - Plastic Farmhouse Sink Protector, Cushions Sinks, Stemware, Wine Glasses, Dishes - Quick Draining Bubble Design - Extra …

L Shaped Shower Curtain Rod - Curved Shower Curtain Rod Adjustable (29.52" …

Solid Brass Kitchen Wall Mount Pot Filler Faucet Swivel Spout Chrome Kitchen tap Two 360-degree rotating structures, Very wide range of activities.Passed 24h salt spray test, 200 hours neutral salt spray test, and pressure system test.Removable... Professional Manufacturer of Wall Mounted Kitchen Faucet Contact Now Add to Basket Click for details

23″ Workstation Ledge Bar Prep Kitchen Sink Undermount 16 Gauge Stainless Steel Single …