Contemporary Single Handle Centerset Faucet- China Manufacturers Factory Suppliers

When decorating kitchens and bathrooms, many people worry about whether to choose an above counter sink or an under counter sink. The above counter sink and the under counter sink have their own advantages and disadvantages. Which one to choose depends on your own preferences.

There is a difference between the definition of the above counter sink and the under counter sink in the kitchen and bathroom, we will analyze them separately.

 

Kitchen Sinks

Above Counter Sink:

Above counter sink installation is the most common and simplest. The opening size of the countertop is slightly smaller than the size of the sink, so that the sink can be placed on the countertop, and then a circle of glass glue can be applied around it.

 

Advantage

The above counter sink is easy to install, and there is no need to worry about deguming if the load is too heavy. It is also convenient to change the sink later, just scrape off the glass glue and replace the sink. The space left under the sink can be about 3 cm higher than the under counter sink.

Disadvantage

It is inconvenient to clean the countertop in future use. The sides of the sink and the countertop are sealed with glass glue. After a long time, the glass glue is easy to mold and turn black.

Under Counter Sink:

There are also two ways to install the under counter sink. One is to make a hole on the counter slightly smaller than the outer edge of the sink. The other is to cut a hole according to the inner edge of the sink.

 

Advantage

The under-counter sink is very easy to take care of, and the countertop is easy to clean. It is integrated with the countertop and more concise.

 

Disadvantage

Relatively speaking, the installation of the under-counter sink is more troublesome. The gap between the countertop and the sink is bonded with a strong adhesive. If you want to replace the sink, you may need to replace the countertop as well. In addition, no matter how strong the glue is, and the load-bearing capacity is uncertain, there is a risk of falling from the counter. General washing and  load-bearing of pots and pans will not cause problems.

 

Bathroom Basins

 

Above Counter Basin

The basin above the countertop is called the above counter basin. The installation of the above counter basin is relatively simple, just cut a hole on the countertop according to the installation drawing. Then place the basin in the hole and fill the gap with glass glue.

 

Advantage

Above counter basins are more beautiful in shape and have a wide variety of types. You can choose according to your favorite style. Easy to install and remove. If you want to replace it with a new basin, you can directly remove it and install a new one.

 

Disadvantage

One is that it is troublesome to clean the countertop, and there is a hygienic corner between the basin and the wall. The second is that the glass glue is used to bond the basin and the countertop, and the glass glue is easy to turn black or mildew after a long time.

Under Counter Basin

 

Advantage

The biggest advantage is that it is easy to clean, and there will be no hygienic dead angle. The basin area is more clean and tidy.

 

Disadvantage

Similar to the kitchen sink, it is still a problem of installation and replacement. And the style of the under-counter basin is fixed, so it is impossible to make more choices in the shape.

 

In summary, the above counter basin and the under counter basin have their own advantages and disadvantages. Simply put, people who want to clean more easily can choose under counter basins in both the kitchen and the bathroom. For the convenience of installation and replacement, or for those who have styling requirements for the bathroom, an above counter basin can be selected.

The bathroom is full of water vapor after taking a shower? The bath water splashes on the ground? Sometimes you slip and fall accidentally? The bathroom without separation of wet and dry is simply maddening. The separation of wet and dry is an unavoidable matter in the bathroom. As long as we have a slight requirement for the quality of the bathroom, we will immediately take care of this matter. Because the separation of wet and dry in the bathroom is a very cost-effective job, it will make your bathroom life full of happiness in minutes. How to achieve the separation of dry and wet in the bathroom? For small-sized bathrooms, the partitions are too narrow, and they cannot be separated from wet and dry. Very tangled. So how to separate wet and dry in a bathroom of only about 5 square meters? Let's analyze how to separate wet and dry in a small bathroom!

 

Separated by Shower Curtain

The shower curtain is the simplest and most beautiful way to separate wet and dry in the bathroom. It can be said to be a must-have artifact for the bathtub. Use a shower curtain to separate the dry and wet areas of a small apartment, which is the most trouble-free and cost-effective. Whether it is an arc-shaped corner, or directly draw a straight line, make a water retaining strip and hang a shower curtain. It is very convenient. You can also frequently change the style of the shower curtain to a different style. But the disadvantage is that it cannot effectively block water vapor, and it is easy to grow mold and needs to be cleaned frequently.

 

Glass Partition

Compared with the shower curtain which can not effectively isolate the water vapor, the shower door is much more practical. More suitable for bathrooms equipped with showers. The shower door is mostly made of glass. Glass partition is a better choice. On the one hand, because the glass is transparent, it does not appear to be visually narrow. Second, because the glass has better water resistance, the effect of wet and dry partitions will be better.

 

Half Wall Partition

For small apartments, this is also a good choice. Not only can it perfectly achieve the purpose of separating dry and wet, but also use the half  wall to create its own style. Pasting retro-style or modern-style tiles on the wall can play a decorative and beautifying role.

 

The water pipe under the sink does not contact the floor.

In addition to working on the door, you can also separate wet and dry in places such as sinks and basins. The important point is to not to touch the floor! Bathroom furniture that is not exposed to water stains is less likely to be corroded, which increases the service life and is also easy to clean.

 

Move the Sink Out

The most complete wet and dry separation is to move the sink directly outside the door. Use part of the outside space to make the shower area inside the bathroom more spacious. In addition, the external washbasin also allows a family to wash without interfering with each other. The vanity and sink are placed outside the bathroom. Completely cut off the moisture in the bath. Small apartments can also use the walkway outside the bathroom to do so!

 

Do you like the bathroom with separate dry and wet function? The dry area and wet area of the bathroom are perfectly separated, which not only partitions the space, but also is visually more fashionable and rich in spatial level. Wet and dry separation has gradually become mainstream in bathroom design, so hurry up and give it a try!

A comfortable bathroom with separate wet and dry spaces should be 6-10 square meters. However, in expensive cities many families have only 3 square meters to 5 square meters bathroom, which makes it difficult to guarantee the activity space. What do you do if you encounter a small apartment with a bathroom of only 3 square meters?

 

To get rid of congestion and clutter, the bathroom needs to be expanded. Learn to partition properly and use storage wisely, you can easily improve the space utilization rate, and truly achieve "small but complete", and double your use space!

01 How to reasonably partition and layout the three functional areas of washing, showering, and toileting ?

Small and medium-sized bathrooms have a limited area, but they are a multi-functional area that integrates various daily needs such as washing, showering, and toileting. It not only needs to meet the various needs of the owners, but also avoids crowding to the greatest extent. Ensure a warm family atmosphere. Reasonable partitioning and layout according to the size of the bathroom space and the location of the bathroom equipment will help expand the sense of space. Let's first understand the layout of the bathroom.

1. Suite Layout

The layout of the suite is to separate the wash basin and the locker into an "outer room", and the toilet and shower being the "inner room". The advantage of this is that the dry and wet partitions and functional partitions not only reduce the inconvenience caused by humidity but also reduce the mutual interference of users.

2. Open Layout

Many families now have a bathroom in the master bedroom. Many people choose to decorate the bathroom as a semi-open style, which is slightly hidden by partitions such as glass, cloth, and shower screens. It not only effectively cuts off water vapor, but also allows the entire bathroom looks bigger and more transparent.

 

3. "T" Shape Layout 

The so-called "T"-shaped layout is to subtly divide the bathroom into T shape. In the horizontal position of the "T", place the sink, makeup mirror, etc. And on the one side of "T" is the toilet and storage cabinet, and the other side is the shower room or bathtub, so the function allocation in the bathroom is quite clear and easy to use.

02 Small Apartment Decoration Space Expanding

The limited space in the bathroom does not mean that the design will also be limited. Creative use of the existing space and clever use of storage can also create the effect of a large space in a small bathroom.

1. Obstacle avoidance skills in bathroom space.

In the washing area, there are obstacles such as water inlet valve, water pipe pillar, electric heater, etc., which take up space seriously.

In order to achieve the effect of the overall bathroom, many families have to make sure that the water pipes are hidden. By customizing the bathroom cabinet, the wall cabinet can make full use of the wall space and increases the storage space; the floor cabinet can also wrap the obstacles in. On the one hand, the defect is corrected; on the other hand, the entire bathroom space looks more regular and wider.

The bathroom space is small, and it is even more troublesome when encountering irregular apartment layouts. The customized countertop not only makes reasonable use of the position of the wall pillars, but also provides enough storage space.

The washing area is surrounded by walls on three sides, and there are large gaps in the finished cabinets, which are not fully utilized, and there are still dead corners for sanitation.

For a small bathroom, compact layout and small fitting furniture can leave more space. If you want to make reasonable use of the space under the wash area, the sink with multiple drawers is definitely a must for a small bathroom. When the size of the finished cabinet is unreasonable, the space is wasted and difficult to use, the problem can be easily solved by cleverly using some small storage items.

 

2. Longitudinal utilization of the wall to achieve space expansion.

The shower area has a lot of water vapor and not much storage space. However, the wall space should not be underestimated. Use the wall space reasonably to let all the sundries on the wall, so that there is no dead corner for storage. Install baskets and wall cabinets, set the height of the wall storage on a proper height, and place the toiletries so that you don't have to jump out of the shower and endure the cold to take them.

 

3. Make full use of the 1㎡ around the toilet.

The one square meter area around the toilet is easy to be overlooked. A wall cabinet or multi-layer wall cabinet can be installed, and the daily necessities can be classified and placed, which not only improves the space utilization rate, but also facilitates daily access.

 

If you are worried about the growth of bacteria or the invasion of moisture, make the closet a closed type, and hide all the cosmetics and toiletries inside. Once the cabinet door is closed, not only the visual burden is reduced, the whole bathroom also looks neater.

03 Combination of Artistic Aesthetics and Practicality 

If the bathroom in one's home is elegant enough, the taste of other rooms must not be much different. A good life is inseparable from design. Design brings aesthetics of life, and good life aesthetics requires a higher-dimensional understanding. One space, several choices. Simple and capable, warm and comfortable, noble and elegant, a mix of Chinese and Western... These are our imaginations of home, and we can customize bathroom spaces of different styles.

Washing, showering, and toileting are the most basic functional divisions of a bathroom. Bathroom customization makes the function of the bathroom truly "needed by people". For irregular space renovation, it is important to make reasonable use of storage space to improve the basic functions of the bathroom. Take a lot of thought, and use all the design techniques that can save space or enlarge space, and you can realize a fully functional and practical small bathroom.

 

Pull as you like. Return accurately.

When renovating the bathroom, the height of the faucet is a headache: if you buy a low one, you have to bend over when washing your hair or  face; if you buy a high one, It's not convenient for the opening and closing of the mirror cabinet. On the other hand, it will cause water splashing due to the large drop...It is not a problem with the Aquacubic faucet!

 

Aquacubic faucet adopts pull-out design. With 360 degree sprayer head to realize free rotation and pull freely, the water can reach any place where the user needs it, and meet all the needs in the bathroom water process. After use, just let go. The built-in gravity hammer can help the faucet retract easily and quickly. Users can experience the pleasure of face cleaning and hair washing in a new way.

Long lasting new. Easy to clean.

The bathroom is full of moisture. In such an environment, water stains or fingerprints are easily left on the surface of the bathroom faucet. Scales will accumulate on the faucet after drying. They are difficult to clean and even gradually corrode the coating and form rust spots on the surface. To make the bathroom faucet last longer, you need surface treatment technology with easy-to-clean coating.

 

Aquacubic faucet adopts precision electroplating layer and SRS surface treatment technology, and passes 24 hours acid salt spray test. The surface has an elegant metallic luster. They are wear-resistant and corrosion-resistant. Faucet will be bright as new with a light wipe. You don’t have to worry about leaving fingerprints and watermarks when you touch it with wet hands. This reduces cleaning time.

 

The bathroom carries most of the cleaning work of a family. In turn it affects the living experience and life quality of the whole family. If you want to enjoy the exquisite life, you need the Aquacubic faucet that can be pulled freely to bring a fashionable bathroom to you!

Pink is considered the exclusive color of girls, and many people can't resist its unique tenderness and romance.

Pink is soft and compatible. It is a very versatile color. When used properly, it can add a unique texture to the space. It now occupies a very special place in home design.

For the pink bathroom space, how can it be decorated to be unconventional?

Combine Pink and Tiles

Worried that too much pink will look tacky? Then add the tile. The large pink walls are matched with tiles of different textures to make the bathroom richer, playful and unique.

Choose bright chrome bathroom accessories in the space to completely blend into the pink space. Towel bar, towel ring, storage basket, soap dish... a full set of configuration. Make the bathroom tidy and clean.

Pink Matches with Other Colors.

Pink is a very tolerant color. Green, which seems difficult to match, is combined with pink. A warm and cold mixed hue makes the space more fresh without any uncomfortable impact.

The sweet pink is matched with the black metal bathroom accessories. The calm black effectively neutralizes the sweetness of the large pink.

The black bathroom accessories with a strong sense of line give the space a sense of high quality.

Embellish the bathroom with pink, soft and not monotonous, elegant and vigorous. Let the space bloom with a different kind of charm.

Aquacubic Solid Brass Matt Black Concealed Overhead Rain Shower Faucet with Hand Shower. 

Waterfall shower head uses air pressure technology and can provide stable and powerful showers even at low water pressure.

Manufactured from premium material with outstanding corrosion resistant performance for ensuring high quality and better durability.

After the shower is turned off, the water still runs. Is it a quality problem?

Have you encountered a problem like this? After the shower was turned off, the water still ticked out. Sometimes after turning off for a long time, the water still flows out suddenly, and it flows fast. This is how it happened. Today, let's take a look at "The sudden water flow problem after the shower is turned off".

 

Regarding this problem, at first it was suspected that it was a shower quality problem. In order to clarify it, we also specially checked our showers, but this kind of situation still occurs. Later, we asked a professional to figure out that the water running after the shower was turned off was because of the water stored in the top spray and the shower pipe.

 

Professional explanation: In order to pursue the comfort of showering, the current shower head sprays are very large. The bigger it is, the more water there is after turning off the faucet. After use, the air pressure inside the shower is in equilibrium with the atmospheric pressure, so the water inside will not flow out temporarily. After some time, the water will flow out when the balance is lost. This is a problem with large-top showers. It is not that the shower is leaking or broken, so you can rest assured if you encounter this problem. If it is a constant dripping and leaking, then it is a quality problem.

 

So what should I do if the shower really leaks?

Analyze the factors of the shower leakage first. The main points are as follows:

 

1. The shower nozzle is blocked. If it is used for a long time, the water output will become smaller. If the water quality is not good, the water contains a lot of alkali, and scale deposits on the water outlet cause the shower to be blocked. At this time, it has to be resolved by the seller of the shower. Therefore, it is very important to choose a reliable seller.

 

2. Shower plating. Many people have found that the surface paint on the shower can peel off. It will be ugly after the paint is peeled off. If you have just bought a shower that has this problem, it will affect the appearance. In addition, some poor-quality showers will block because of paint falling off. So we have to take a closer look at the surface of the purchased shower for these problems.

 

When purchasing a shower, you must carefully observe whether the surface of the shower is smooth or not. If it is rough to the touch, it may be processed twice.

 

3. The material of the shower. Some showers are made of plastic or cast iron. The plastic shower head may contain a lot of waste material, and the service life will not be long. Of course, some hand showers that use plexiglass, ABS and other materials are still very good. However, it is not recommended that you choose the shower head made of cast iron, which is easy to rust. Many people who chose this shower are very regretful, because it didn't take long for it to rust. It's ugly, and it also blocked the water outlet and broke the entire shower. At present, the better material is copper. 

 

After knowing the reason, we can come to a solution. There are mainly the following solutions for leakage in the shower:

1. Leakage at the steering ball of the shower head. First unscrew the shower head from the steering ball ring, find the O-ring or similar seal inside and replace it, and then turn the shower head back. Just go to the original position.

 

2. Leakage occurs at the joint of the handheld shower. Select the right size shower hose and shower head according to the specifications, replace its rubber ring, and reinstall it.

 

3. Water leakage caused by gravel or sediment. Unscrew the shower head for cleaning. If necessary, soak the parts with vinegar and scrub the parts. Take care to avoid scratching it. If the shower head is an adjustable spray type, carefully check all movable parts for signs of excessive wear. If the rotating handle cannot move smoothly, the internal cam may be broken, and the entire shower head needs to be replaced.

 

4. The spray mode from the shower head becomes a mixture of spray and rain mode. If the shower is used for a long time, the water output will decrease. It may be because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet cause the shower to be blocked. It is also very simple to solve. For the shower head designed with silica gel particles, just gently knead it. If the scale is serious, you can put white vinegar in a plastic bag, wrap the shower and soak for some time, then rinse with water.

Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers. 

The products include faucets, sinks, basins, bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.

Look forward to cooperating with you.

Thanks a lot!

Home decoration is troublesome. Apart from other things, it may be very troublesome to choose the toilet. Although all the toilets on the market only have one function, there are many types. Choose from product details when purchasing. Know these 5 tips before buying a toilet.

 

1. Tips for Buying a Toilet

1) When selecting, you can tap the outer wall of the toilet gently with your finger. If the voice is hoarse, not clear and loud enough, then the toilet is likely to be internally cracked, or the toilet itself is not burned well.

2) The quality of the toilet depends on the quality of its ceramics. A good ceramic surface is uniformly lubricated and has a soft color. Gently touch the surface of the toilet with your hand. The glaze and embryos are delicate, indicating that the toilet is of good quality; for low- and medium-grade toilets, the glaze is rough and the color is dim, and small holes will be found under the light.

3) Pay attention to the return curve and water tank. Choose a glazed one, so that it is not easy to hide dirt and is easy to clean. When selecting, you must reach into the toilet's drain and touch it to see if the interior is smooth. A good toilet manufacturer will not ignore these two details.

4) Choose a toilet that is washable, otherwise you will definitely worry about cleaning the toilet in the future.

5) Test the flushing effect of the toilet pipe. Under normal circumstances, you must first try flushing before buying a toilet. There are some optimized flushing systems that can control the noise decibels below 50 decibels, which is very suitable for families with babies.

 

2. Precautions for Purchase of Toilet

1) The maximum flushing volume is below 6L.

2) Its own weight is above 40 kg.

3) Requirements for accessories: there is a delay water inlet valve; the water level difference is within 3mm; the water pressure has a wide range of application.

4) The height of the water seal is 55-60mm.

5) It is preferred that the inner side of the S-curve is also glazed on the toilet.

3. Precautions for Purchasing Smart Toilets:

1) It is recommended to select the instant heating method.

2) The impulse type is recommended for the water outlet method.

3) With power-off flushing function.

4) In addition to hot water washing and hot air drying, there are six mandatory functions: constant water temperature, sensor switch cover, night vision lighting, automatic deodorization, seat heating and seat bacteriostasis.

 

4. Shower

The shower can be divided into multiple product types according to the water outlet method, installation height, style, etc. When purchasing, pay attention to choosing the most suitable one.

How to judge the shower:

When buying a shower, first find out whether the water effect is good. Secondly, look at whether the surface coating is bright and smooth. Then check whether the shower valve core is made of ceramic, smooth and frictionless. Finally, see whether the shower accessories are appropriate and whether the quality meets the requirements.

 

Precautions for purchase of shower head:

1. It is recommended to choose ceramic valve core for ordinary shower.

2. Copper is recommended for the main body. Choose at least 59-1 copper, with 59% copper and 1% lead. It is recommended to choose CUPC certified showers.

3. It is recommended to choose a shower set with a lifting bracket and a bath faucet.

4. For those who like top spray and large water output, it is recommended to choose a concealed shower system.

5. Most of the items marked with "pressurized shower" achieve the "pressurized" effect by reducing the water outlet, and it is not very comfortable.

 

5. Bathtub

Before deciding to buy a bathtub, the first thing you need to consider is to choose the size of the bathtub according to the area of the bathroom, and set the height of the water outlet. It is also necessary to consider the particularities of family members, such as children, the elderly, and the disabled. When choosing a bathtub, it is best to choose a lower one, and you can also install handrails in an appropriate position. The bathtub itself should also have anti-slip treatment and so on. Relatively speaking, bathtub selection is more complicated.

 

Bathtub Purchase Skills

Gloss: understand the pros and cons of the material by looking at the surface gloss;

Smoothness: Check whether the surface of the bathtub is smooth by hand;

Firmness: the firmness can be tested by pressing by hand or stepping on the foot;

Sound: It is best to test the water to listen to the sound before buying. Don't choose a bathtub with too much noise.

 

Precautions for Purchase of Bathtubs:

1) The bathtub area is not very big. It only needs 1.2 square meters to install a standard bathtub.

2) The one-piece bathtub without separation is more practical.

3) It is better to have a hair filter in the water.

4) When choosing a bathtub with massage, bubble or mixed functions, you must try it first, and then choose the one that suits you.

5) Before the completion of the installation, the water storage and discharge experiment must be done under the standard water pressure, and both cold and hot water must be done.

6. Shower Room

Precautions for purchase of shower room:

1) It is recommended to choose anti-fingerprint treated stainless steel for the frame material.

2) It is recommended to choose a sliding door for the shower door. It has advantages over flat doors in terms of space occupation, convenience, and safety.

3) The recommended thickness of tempered glass is 8mm, and the minimum is no less than 6mm.

4) The quality of tempered glass is critical. Need to know about glass manufacturers and choose factories with CCC certification.

 

7. Bathroom Cabinet

Bathroom cabinets mainly include solid wood bathroom cabinets, ceramic bathroom cabinets, PVC bathroom cabinets, and acrylic bathroom cabinets. The solid wood bathroom cabinet is made of dehydrated solid wood as the base material. It has an exquisite appearance, high grade and good waterproof performance. However, solid wood bathroom cabinets are bulky and prone to cracking and require good maintenance.

Ceramic bathroom cabinets are relatively clean in appearance and easy to take care of, but they are easily damaged. The appearance of PVC bathroom cabinet is more shiny, and the cabinet is lighter, and the waterproof performance is the best. However, PVC bathroom cabinets are easily deformed when subjected to a collision. Acrylic bathroom cabinets are similar to PVC bathroom cabinets, but are more brittle than PVC cabinets, and are prone to scratches and cracks.

Bathroom cabinet selection method:

1) Check whether the bathroom cabinet is damaged, cracked or deformed.

2) Check whether the glazed surface of the bathroom cabinet is flat and whether the surface is cracked.

3) Check whether the various parts of the bathroom cabinet are tightly connected and whether it is used smoothly.

4) Look at the anti-fouling ability of the bathroom cabinet, which can be tested by scribbling and erasing.

 

Precautions for bathroom cabinet installation:

1) If you have not done in-wall inlet and outlet pipe renovation, it is recommended to choose floor-standing solid wood cabinets.

2) It is recommended that bathroom cabinets with a width of 1.4 meters and above adopt the design of double basins.

3) If the feet of the bathroom cabinet are made of wood, it is recommended to use a thin rubber pad to separate them from the floor.

 

When installing, there should be a 1cm gap between the bathroom cabinet and the wall to prevent the back panel from contacting the wet wall for a long time to cause get mouldy.

The sink must be installed in the bathroom? Take a look at these locations that may be more suitable for sinks in your new home!

As a patient with lazy cancer, where to put the sink determines how many steps I have to take to wash my hands. Do I have to go to the bathroom after eating snacks and watching a drama at night, and getting up to wash my hands? Can't the sink be placed at the door? Put it under my nose? Or even in the balcony close to me? The answer is yes.

 

01. Where should the sink be moved out of the bathroom?

In order to make it easier for you to use, we will give you a few common places to put the sink. It can be installed in the hallway. There may be few people who think of this, but it is very common in Japan. As long as space permits, they will find a way to add a sink near the hallway so that they can wash their hands as soon as they enter the house. In addition, the sink can also be used as a partition of the entrance, so that even the entrance hall is made.

 

Put the sink on the aisle at the entrance of the bathroom. In this way,  the dry and wet separations can be easily realized. Because the washbasin only occupies a small area, the total space will not become small.

 

If you are worried that the total appearance will be affected by putting it outside, and later storage can not be done well and it is messy, you can directly weaken it visually during the renovation by adding a wall to enclose it.

 

Wooden fences or glass can also be used as partitions, and cabinets can be used for storage on top.

 

The glass partition can prevent water from splashing everywhere when washing hands, and keep the space visually transparent.

 

If there is a gap between two rooms, you may consider putting the sink here. Such as between two bedrooms, between the kitchen and the bathroom, etc.

The advantage of this is that it can make full use of the space and avoid the waste of repeated settings. At the same time, it can also have the function of dividing space. It can also be installed on the balcony. Modern people spend most of their time in the living room. If you put the sink on the balcony closest to the living room, because there is plenty of light and the view is open, will you feel better when you wash your hands?

We can also put the washing machine next to it, throw the clothes in and wash them.

It is relatively rare to install on the dressing table. A dressing table can be placed in the bedroom to store all kinds of small things, and it can be combined with the sink. Sinks can be installed in the bathroom, outside the bathroom, or between the cloakroom and the bathroom.

According to our thoughts, these may seem strange, but starting from the owner’s living habits, it seems to be a reasonable design. Tip: The disadvantage of placing the sink outside the bathroom is the laying of water and sewage and waterproofing. Need to discuss with construction workers in advance and implement as required. Waterproofing should also be done well. It is recommended to follow the waterproof standard of the dry area of the bathroom, and apply waterproof paint at least 30cm high on the wall near the sink and on the floor. Secondly, there is no door to block the washbasin outside. If the storage is not done properly, the messy scene will be directly exposed. Therefore, the corresponding storage function must be done well, and the choice of towels even become stricter. Otherwise sit in the living room and see a messy washing area.

02. An easy-to-use sink can be like this.

In addition to moving the washbasin, its appearance and comfort should also keep up. You need to know the following knowledge. The style of the washbasin: Above counter basin and under counter basin. Above counter basin has a super good looking. In addition to square, round, oval, there may be other petal shapes to choose from. Generally they can be matched with high body faucets.

The under-counter basin is installed under the countertop and glued to the countertop from bottom to top. The advantage is that it is very convenient to clean the countertop. It is very common to have water on the countertop, you can easily wipe the water into the basin. It is more convenient to have a mirror cabinet, and the storage capacity can be improved a lot. Some mirror cabinets are fully enclosed, and some are partially open for storage. What kind of mirror cabinet to choose depends on your living habits.

Lighting Design.

Light is a top requirement for looking in a mirror. Most people may only install a mirror headlight above the mirror. In fact, the best way is to set up lights on the left and right sides of the mirror, which is about one person wide. Many professional dressing tables are set up in this way.

Double Basin Design

The double basin design can improve life efficiency. For example, a family of four has to go to school and work at the same time. And two people washing together is also very warm. Of course, double basins may only be suitable for large bathroom space.

Basin Style

It can be a basin or not. An artistic design. For example, in a retro-style home, try a bicycle wash basin.

 

There are also a few stacked stones. Is there a trace of natural "spring" style when the water runs out from the stone?

 

If you like minimalist style, consider this transparent glass wash basin.

 

If you want to realize the separation of dry and wet, but in the small area of the bathroom it cannot be realized, the above method can be considered. It is indeed completely reasonable and feasible to move the sink out.

Touchless Kitchen Faucets Offer reliable, hands-free operation. Prep/Bar Sink Faucets Add convenience and streamline entertaining. Pot Fillers Can be mounted to a counter or wall to easily fill pots with water. Water Filtration Faucets Compatible with our filtration system to reduce water contaminants. Additional information

Port Haven Kitchen Bridge Faucet with Side Spray by Pfister From

Kitchen Knifes (458) Cleavers

?This faucet combines the pull-down faucet with the bridge faucet. The pull-down nozzle with 3 functions provides maximum flexibility and can reach all hard to reach places in and around the kitchen sink.

Stainless Steel Farmhouse - Double Butler and Single Bowl Sinks Sale Stainless Steel Butler Sink 755 Belfastsinks.au Sale Stainless Steel Double Butler Offset Sink - 838 Belfastsinks.au Sale Stainless Steel Double Butler Sink …

Bathroom Sink Faucet Industrial Pipe Basin Faucet Single Handle Brass Lavatory Vessel Mixer Tap Steampunk Matte Black 360° Swiveling Spout Commercial Single Hole Vanity Faucet.

infrared water saving automatic motion touchless bathroom sensor faucet

Copper Bridge Faucet (1 - 40 of 184 results) Price (