











The bathroom is full of water vapor after taking a shower? The bath water splashes on the ground? Sometimes you slip and fall accidentally? The bathroom without separation of wet and dry is simply maddening. The separation of wet and dry is an unavoidable matter in the bathroom. As long as we have a slight requirement for the quality of the bathroom, we will immediately take care of this matter. Because the separation of wet and dry in the bathroom is a very cost-effective job, it will make your bathroom life full of happiness in minutes. How to achieve the separation of dry and wet in the bathroom? For small-sized bathrooms, the partitions are too narrow, and they cannot be separated from wet and dry. Very tangled. So how to separate wet and dry in a bathroom of only about 5 square meters? Let's analyze how to separate wet and dry in a small bathroom!
Separated by Shower Curtain
The shower curtain is the simplest and most beautiful way to separate wet and dry in the bathroom. It can be said to be a must-have artifact for the bathtub. Use a shower curtain to separate the dry and wet areas of a small apartment, which is the most trouble-free and cost-effective. Whether it is an arc-shaped corner, or directly draw a straight line, make a water retaining strip and hang a shower curtain. It is very convenient. You can also frequently change the style of the shower curtain to a different style. But the disadvantage is that it cannot effectively block water vapor, and it is easy to grow mold and needs to be cleaned frequently.
Glass Partition
Compared with the shower curtain which can not effectively isolate the water vapor, the shower door is much more practical. More suitable for bathrooms equipped with showers. The shower door is mostly made of glass. Glass partition is a better choice. On the one hand, because the glass is transparent, it does not appear to be visually narrow. Second, because the glass has better water resistance, the effect of wet and dry partitions will be better.
Half Wall Partition
For small apartments, this is also a good choice. Not only can it perfectly achieve the purpose of separating dry and wet, but also use the half wall to create its own style. Pasting retro-style or modern-style tiles on the wall can play a decorative and beautifying role.
The water pipe under the sink does not contact the floor.
In addition to working on the door, you can also separate wet and dry in places such as sinks and basins. The important point is to not to touch the floor! Bathroom furniture that is not exposed to water stains is less likely to be corroded, which increases the service life and is also easy to clean.
Move the Sink Out
The most complete wet and dry separation is to move the sink directly outside the door. Use part of the outside space to make the shower area inside the bathroom more spacious. In addition, the external washbasin also allows a family to wash without interfering with each other. The vanity and sink are placed outside the bathroom. Completely cut off the moisture in the bath. Small apartments can also use the walkway outside the bathroom to do so!
Do you like the bathroom with separate dry and wet function? The dry area and wet area of the bathroom are perfectly separated, which not only partitions the space, but also is visually more fashionable and rich in spatial level. Wet and dry separation has gradually become mainstream in bathroom design, so hurry up and give it a try!
The sink must be installed in the bathroom? Take a look at these locations that may be more suitable for sinks in your new home!
As a patient with lazy cancer, where to put the sink determines how many steps I have to take to wash my hands. Do I have to go to the bathroom after eating snacks and watching a drama at night, and getting up to wash my hands? Can't the sink be placed at the door? Put it under my nose? Or even in the balcony close to me? The answer is yes.
01. Where should the sink be moved out of the bathroom?
In order to make it easier for you to use, we will give you a few common places to put the sink. It can be installed in the hallway. There may be few people who think of this, but it is very common in Japan. As long as space permits, they will find a way to add a sink near the hallway so that they can wash their hands as soon as they enter the house. In addition, the sink can also be used as a partition of the entrance, so that even the entrance hall is made.
Put the sink on the aisle at the entrance of the bathroom. In this way, the dry and wet separations can be easily realized. Because the washbasin only occupies a small area, the total space will not become small.
If you are worried that the total appearance will be affected by putting it outside, and later storage can not be done well and it is messy, you can directly weaken it visually during the renovation by adding a wall to enclose it.
Wooden fences or glass can also be used as partitions, and cabinets can be used for storage on top.
The glass partition can prevent water from splashing everywhere when washing hands, and keep the space visually transparent.
If there is a gap between two rooms, you may consider putting the sink here. Such as between two bedrooms, between the kitchen and the bathroom, etc.
The advantage of this is that it can make full use of the space and avoid the waste of repeated settings. At the same time, it can also have the function of dividing space. It can also be installed on the balcony. Modern people spend most of their time in the living room. If you put the sink on the balcony closest to the living room, because there is plenty of light and the view is open, will you feel better when you wash your hands?
We can also put the washing machine next to it, throw the clothes in and wash them.
It is relatively rare to install on the dressing table. A dressing table can be placed in the bedroom to store all kinds of small things, and it can be combined with the sink. Sinks can be installed in the bathroom, outside the bathroom, or between the cloakroom and the bathroom.
According to our thoughts, these may seem strange, but starting from the owner’s living habits, it seems to be a reasonable design. Tip: The disadvantage of placing the sink outside the bathroom is the laying of water and sewage and waterproofing. Need to discuss with construction workers in advance and implement as required. Waterproofing should also be done well. It is recommended to follow the waterproof standard of the dry area of the bathroom, and apply waterproof paint at least 30cm high on the wall near the sink and on the floor. Secondly, there is no door to block the washbasin outside. If the storage is not done properly, the messy scene will be directly exposed. Therefore, the corresponding storage function must be done well, and the choice of towels even become stricter. Otherwise sit in the living room and see a messy washing area.
02. An easy-to-use sink can be like this.
In addition to moving the washbasin, its appearance and comfort should also keep up. You need to know the following knowledge. The style of the washbasin: Above counter basin and under counter basin. Above counter basin has a super good looking. In addition to square, round, oval, there may be other petal shapes to choose from. Generally they can be matched with high body faucets.
The under-counter basin is installed under the countertop and glued to the countertop from bottom to top. The advantage is that it is very convenient to clean the countertop. It is very common to have water on the countertop, you can easily wipe the water into the basin. It is more convenient to have a mirror cabinet, and the storage capacity can be improved a lot. Some mirror cabinets are fully enclosed, and some are partially open for storage. What kind of mirror cabinet to choose depends on your living habits.
Lighting Design.
Light is a top requirement for looking in a mirror. Most people may only install a mirror headlight above the mirror. In fact, the best way is to set up lights on the left and right sides of the mirror, which is about one person wide. Many professional dressing tables are set up in this way.
Double Basin Design
The double basin design can improve life efficiency. For example, a family of four has to go to school and work at the same time. And two people washing together is also very warm. Of course, double basins may only be suitable for large bathroom space.
Basin Style
It can be a basin or not. An artistic design. For example, in a retro-style home, try a bicycle wash basin.
There are also a few stacked stones. Is there a trace of natural "spring" style when the water runs out from the stone?
If you like minimalist style, consider this transparent glass wash basin.
If you want to realize the separation of dry and wet, but in the small area of the bathroom it cannot be realized, the above method can be considered. It is indeed completely reasonable and feasible to move the sink out.
In addition to the practicality of the apartment renovation, we also pay attention to its beauty. For example, choose wall-mounted toilets and washbasins; choose concealed baseboards; hide all the pipes; improve the overall aesthetics!
Concealed showers are more beautiful than exposed showers.
There are mainly the following 3 ways to install the shower:
1) Exposed installation: the water inlet pipe and mixing valve of the shower are exposed outside, which is not beautiful enough;
2) Concealed pipe installation: The inlet pipe is buried in the wall and the mixing valve is outside. This is most commonly used method;
3) Concealed installation: Completely opposite to the first type, the inlet pipe and the return valve are installed inside the wall. Leaving only the switch and the water outlet outside. Although it is beautiful, the process is complicated.
For concealed showers, there are also two different styles:
1) Top sprayer and hand shower
Look at the picture, the top shower head is matched with a hand-held shower head at the bottom. In this way, you need to determine the size of the shower head before renovation. And do the drilling and wiring layout. In terms of installation, this method is relatively simple.
2) With additional side spray
This is based on the former, plus a side spray function. During renovation, pre-installed in-wall boxes and multiple valve cores are required to match the water outlet. You can imagine how complicated this approach is! How to install it? Look down.
First determine the number of side nozzles (usually 2-6); the in-wall installed valve core has multiple outlet connection ports, from the valve core to the main water inlet, other outlets, top spray showers and hand showers; Secondly, cement leveling is required between the valve core and the wall, and in-wall installed parts are also used to stabilize; then leveling, waterproofing and pressing are performed to see if there is any leakage; the last step is to sticking ceramic tiles.
Compared with the exposed installation, the appearance of the concealed shower is certainly more attractive. However, the maintenance is complicated and cannot be ignored. The water pipe fittings of the exposed shower are all on the outside. If the concealed shower needs to be repaired, we can only break the wall! But if you choose a good quality shower, except for the water pipe problem, you don't need to break the wall under normal circumstances.
If you really like the appearance, it is not a big problem to choose a concealed shower. But if you are still worried about renovation and later maintenance, it is recommended not to try it.
Shower Purchase Skills
1. When choosing a shower, try to make the shower tilted (to see the water effect). If the top spray holes are obviously small or there is no water at all, it shows that the internal design of the shower is very low. It is impossible for the user to have a comfortable experience.
2. Look at the coating and valve core. Under normal circumstances, the brighter and more delicate the surface of the shower, the better the coating process. The high-quality shower uses high-quality ceramic valve core, which has high hardness and wear resistance, and is not easy to drip. The rotating adjustment handle is also very smooth.
3. Everyone knows that if the shower is used for a long time, there will be scale and impurities deposits, which will block the water outlet. If the mesh cover cannot be cleaned, the shower will not discharge water normally; in order to avoid the blockage of the water outlet due to poor water quality. All the shower nozzles should stick out for easy cleaning.
4. Shower accessories will directly affect the comfort of our shower. This cannot be ignored. For example, whether the lifting rod of the shower is flexible. Whether the shower joint is equipped with anti-twist ball bearings. Whether there is a rotation controller on the lifting rod, etc.
5. The water-saving function of the shower is the key point to be considered when purchasing the shower. Some showers use a steel ball valve core, and are equipped with a hot water controller, which can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. This type of shower with a reasonable design saves 50% of water compared to ordinary showers.
Installation Precautions
1. Do a good job of cleaning up during installation, especially the valve core. During the decoration, it is inevitable that decoration dust or even large particles of impurities enter the water supply pipe. If it is not cleaned up, these impurity particles will enter the valve core of the shower faucet, easily causing blockage or even destroying the internal structure of the valve core. If the shower has little water output, it is very likely that the cleaning work is not in place.
2. To ensure safety, equipotential terminals are indispensable.
An electric shock prevention system is indispensable in the bathroom: equipotential terminal. After all, compared with other spaces, the bathroom is accompanied by water all the year round, and the risk is relatively high. Connect with the equipotential terminal to prevent leakage, electric shock, and avoid dangerous situations.
There are a large number of shower options. So everyone can try to choose different showers. Traditional showers have gradually been eliminated. We must learn to keep up with the trend in renovation project.
Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers. The products include faucets, sinks, basins,
bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.
Look forward to cooperating with you.
Thanks a lot!
In China some people say that the struggle in the big city is so hard. Why not go to work in a small town? Is it worth struggling to afford a small apartment for a lifetime? I believe many people will find it worthwhile, because in big cities there are opportunities that cannot be found in small towns. The small apartment is not terrible. We can remodel it. As long as we have a dream, everything is possible. The owner Mr. Zhang who lives in Shanghai, like most ordinary citizens, worked hard all the way from the small hometown and finally settled in Shanghai and bought an apartment of 70 square meters. After having a child, Mr. Zhang took his parents from his hometown. A family of 5 squeezed into a small apartment. There was only one bathroom. Every morning and every evening, they were faced with taking turns to line up to take a bath and wash. They had no patience after some time. So he thought about making another shower room, and he can make the most of the balcony. Looking at the balcony that costs him a lot, only used to pile debris and dry clothes, Mr. Zhang felt it was a pity. He had heard of a case of transforming a balcony into a shower room before, so he wondered why not give it a try. If it fails, it will be dismantled after all. After talking to his wife, Mr. Zhang started serious research. After careful study, he summarized the following points to note:
First of all, it must be waterproof. Due to the special location of the balcony, the back may be the living room or bedroom. Considering that moisture may cause mold and peeling on the back wall, it is recommended that the waterproof layer of the wall where the shower is installed is painted as high as possible. The waterproof coating is generally brushed 2~3 times.
Second, make sure that the ground has a slope. The ground also needs to be waterproofed, and it is also necessary to ensure that the ground has a certain slope so that the sewage from the bath is discharged to the drain and will not flow back to the living room or other places.
Third, strengthen heat preservation. There is a big difference between the balcony shower room and the indoor shower room. Generally, the indoor shower room has only one wall with windows, and it can be kept warm by installing a heating system.
Finally, pay attention to the issue of privacy.
After studying how to install it, the next step is to choose a good shower room. Which products can meet this special demand? Because the balcony shower room is unavoidable from the wind and sun, we must pay attention to its material and anti-rust, anti-corrosion, and anti-fading ability. At the same time, pay attention to whether the frame is strong and stable, and the wall of the shower room must be strong.
After comparison, Mr. Zhang finally chose this shower room. This shower room is based on apartment space. The large apartment frame glass curtain wall, angular and cylindrical surfaces make the entire bathroom space richer.
At the same time, automotive-grade toughened glass has a thickness of 10MM, can withstand 700° high temperature, and has a high strength about 5 times that of ordinary glass, with outstanding impact resistance and thermal stability. In addition, EPM steel mold protection is added, so you don't have to worry about the risk of glass bursting. Even if it breaks, it will still stick to the debris to prevent the glass from splashing and hurting people. You can take a shower without restraint.
The door frame, handle and hinge outside the main body of the shower room are all made of high-quality aluminum alloy, and the surface should also be treated with anti-corrosion, anti-rust and anti-oxidation. In this way, there will be no signs of paint falling off after being exposed to the wind and sun on the balcony, and the structure is relatively strong and not prone to deformation.
In addition, the shower room is installed on the balcony. We will most worry about water will flow everywhere. This shower room has a overflow channel and magnetic tape, which can lock the water in all directions. Don't need to worry about getting the living room wet.
After the shower is turned off, the water still runs. Is it a quality problem?
Have you encountered a problem like this? After the shower was turned off, the water still ticked out. Sometimes after turning off for a long time, the water still flows out suddenly, and it flows fast. This is how it happened. Today, let's take a look at "The sudden water flow problem after the shower is turned off".
Regarding this problem, at first it was suspected that it was a shower quality problem. In order to clarify it, we also specially checked our showers, but this kind of situation still occurs. Later, we asked a professional to figure out that the water running after the shower was turned off was because of the water stored in the top spray and the shower pipe.
Professional explanation: In order to pursue the comfort of showering, the current shower head sprays are very large. The bigger it is, the more water there is after turning off the faucet. After use, the air pressure inside the shower is in equilibrium with the atmospheric pressure, so the water inside will not flow out temporarily. After some time, the water will flow out when the balance is lost. This is a problem with large-top showers. It is not that the shower is leaking or broken, so you can rest assured if you encounter this problem. If it is a constant dripping and leaking, then it is a quality problem.
So what should I do if the shower really leaks?
Analyze the factors of the shower leakage first. The main points are as follows:
1. The shower nozzle is blocked. If it is used for a long time, the water output will become smaller. If the water quality is not good, the water contains a lot of alkali, and scale deposits on the water outlet cause the shower to be blocked. At this time, it has to be resolved by the seller of the shower. Therefore, it is very important to choose a reliable seller.
2. Shower plating. Many people have found that the surface paint on the shower can peel off. It will be ugly after the paint is peeled off. If you have just bought a shower that has this problem, it will affect the appearance. In addition, some poor-quality showers will block because of paint falling off. So we have to take a closer look at the surface of the purchased shower for these problems.
When purchasing a shower, you must carefully observe whether the surface of the shower is smooth or not. If it is rough to the touch, it may be processed twice.
3. The material of the shower. Some showers are made of plastic or cast iron. The plastic shower head may contain a lot of waste material, and the service life will not be long. Of course, some hand showers that use plexiglass, ABS and other materials are still very good. However, it is not recommended that you choose the shower head made of cast iron, which is easy to rust. Many people who chose this shower are very regretful, because it didn't take long for it to rust. It's ugly, and it also blocked the water outlet and broke the entire shower. At present, the better material is copper.
After knowing the reason, we can come to a solution. There are mainly the following solutions for leakage in the shower:
1. Leakage at the steering ball of the shower head. First unscrew the shower head from the steering ball ring, find the O-ring or similar seal inside and replace it, and then turn the shower head back. Just go to the original position.
2. Leakage occurs at the joint of the handheld shower. Select the right size shower hose and shower head according to the specifications, replace its rubber ring, and reinstall it.
3. Water leakage caused by gravel or sediment. Unscrew the shower head for cleaning. If necessary, soak the parts with vinegar and scrub the parts. Take care to avoid scratching it. If the shower head is an adjustable spray type, carefully check all movable parts for signs of excessive wear. If the rotating handle cannot move smoothly, the internal cam may be broken, and the entire shower head needs to be replaced.
4. The spray mode from the shower head becomes a mixture of spray and rain mode. If the shower is used for a long time, the water output will decrease. It may be because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet cause the shower to be blocked. It is also very simple to solve. For the shower head designed with silica gel particles, just gently knead it. If the scale is serious, you can put white vinegar in a plastic bag, wrap the shower and soak for some time, then rinse with water.
Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers.
The products include faucets, sinks, basins, bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.
Look forward to cooperating with you.
Thanks a lot!
The bathroom is used for bathing, washing, dressing, and indoor toileting. It is a frequently used home space. But the bathroom space only accounts for a small part of the overall home space. In the limited area, bathroom storage becomes very important.
It doesn't matter if you didn't plan the storage space when you renovated the bathroom at the beginning. Recommend 5 bathroom storage products to make your bathroom space organized.
1. Multifunctional Shelf
Wash away all fatigue and awaken physical and mental energy. The small bathroom is actually our energy gas station. Every morning and evening, we will spend some time alone with "it". The bathroom is a very important space in the home. The area of this space is small, but there are a lot of items that need to be accommodated. Therefore, the storage in many people's homes has become a big problem.
The multifunctional shelf solves this problem for everyone. Placed in the bathroom to store up some odds and ends. It looks neat and beautiful. And the simple structure makes it easy to clean. Moisture-proof and ventilated, it is a good storage item. It is effectively matched with the bathroom space.
2. Triangle Shelf
Another essential piece of hardware in the shower area is the triangle shelf. You can usually put shampoo, shower gel, skin care products, razor, etc. The racks are distinguished according to the installation position. There are ordinary rectangular racks, which are installed on a wall. There is also a tripod, installed at the junction of two walls.
This shelf uses a triangular design, simple in shape, beautiful and high-end, very suitable for modern bathroom design. Exquisite corner design, effective use of space. The weight-bearing capacity is also top-notch, meeting the needs of life.
3. Towel Rack
The towel rack is a must-have item for the bathroom, which integrates practicability and aesthetics. Nowadays, there are generally products such as single rod, double rod, multi-rod on the market.
The towel rack has good moisture resistance, corrosion resistance, compression resistance and high temperature resistance. The design of split layer and widening of the bars are adopted to prevent the towels from sticking to each other. Can be very moisture-proof and easy to take. Large space capacity. The lower bar can be used to hang towels. The upper layer can be used to put clean bath towels or clean clothes.
4. Multifunctional Paper Tissue Holder
A good tissue holder can last for many years. It is not only a tissue holder, but also a shelf. The mobile phone can be placed to free your hands temporarily. You can also put some aromatherapy or green plants and other small objects on it. The multifunctional paper towel rack adopts an open design, so you can know the remaining amount of paper tissue at any time, and no longer have to worry about being trapped in the toilet because there is no paper.
Suspended design, hygienic and moisture-proof. The roll of paper keeps a certain distance from the wall. The paper towel does not come into close contact with the wall.
5. Toilet Brush Holder
It is not hygienic to put the toilet brush on the ground, so there is a toilet brush holder. It is clean and tidy, and beautiful. The toilet brush holder uses high-quality stainless steel to make the bracket, which is waterproof, wear-resistant and not easy to corrode, and is not affected by water vapor and damp walls in the bathroom space. Long-term use is more assured.
Upgraded one-piece casting base design, meticulous workmanship, practical and durable. The simple style is highly integrated with the bathroom environment and enhances the bathroom style.
It is "too difficult" to put bottles and cans in a small bathroom. Organize items in a planned way and add storage items reasonably to make the bathroom space more tidy. Let's expand the small space from now on, let's take action!
How to define accessible luxury?
It is not only a design style,
It is a high-style life philosophy.
It is prosperous in a minimalist place,
Elegance is not complicated, simplicity is not simple.
Accessible luxury is not simple. It has a variety of manifestations.
Warm, light and luxurious, noble and comfortable
A touch of orange brightens the whole space,
Match with gray tile floor and brown wall,
It highlights the high style of the whole space.
Nordic luxury, elegant style.
The main color is gray.
Large light gray marble walls,
Decorate the whole space with a piece of green plants,
With light gray bathroom cabinet,
It's bright and comfortable.
Simple, light and luxurious, elegant and advanced
To simplify, black and white color covers the whole space.
Spacious wall space,
Complete set of black bathroom Shower Faucet,
Not only meet the requirements of storage, but also decorate the bathroom.
A variety of accessible luxury bathrooms,
With unique charm,
More possibilities for home,
Bring luxury and elegant life enjoyment to the customers.
Some faucets are simple and practical, while others are decorative. Faucets can be in many different materials and shapes, such as short/high, single/double handle, stainless steel/brass, chrome/black/gold colors, etc. It can reflect the contemporary architectural decoration style. Also so many brands of faucets are available. Do you want to know the best faucet brands in China? Let's take a look at the ranking of China's top 7 faucets brands in 2020.
Ⅰ. MOEN
Moen entered the Chinese market in 1994 and established its first sales company in Waigaoqiao Free Trade Zone, Shanghai. In the following few years, American Moen company has established offices in Shanghai, Beijing, Guangzhou and Chongqing, and its sales network has covered more than 180 cities in China. In 1996, Moen set up a joint venture factory in China with global advanced production management and manufacturing technology, which shows its confidence in the Chinese market and its determination to develop in China for a long time. At the same time, all the factories in China have passed ISO9001 quality system certification and ISO14001 environmental system certification. Relying on the deep understanding of the needs of users, distributors, agents and professionals in the industry and the joint efforts of all employees, American Moen company has become one of the leading figures in China's kitchen and bathroom equipment industry, and has established a strong sales network and perfect after-sales service system. The company's business is developing rapidly, and its products are deeply loved by users.
Ⅱ. Jomoo
Founded in 1990 and headquartered in Quanzhou, Fujian Province: the Economic Zone on the west side of the Taiwan Strait, Jomoo Group is a large comprehensive bathroom leading enterprise and a national high-tech enterprise integrating R and D, production, sales and service. It is also the Secretariat of "Kitchen and Bathroom Hardware Sub-technical Committee of National Hardware Standardization Technical Committee". The group's brand "JOMOO" has won many national honors such as "China's Famous Trademark", "China's Environmental Label Product Certification", and has been selected into the government green procurement list for many times.
Jomoo group headquarter covers an area of more than 1.34 square kilometre. It owns 7 subsidiaries, 4 business divisions and more than 8500 employees. Since its establishment, Jomoo group has taken "creating healthy kitchen and bathroom life, making the earth environment better" as its mission. Through continuous scientific and technological innovation, Jomoo group has made great efforts to provide customers with safe and environmental protection, resource-saving products and high-quality services, and constantly improve and enhance the quality of home life.
Ⅲ. Hansgrohe
In 1995, Hansgrohe set up an office in Shanghai to introduce the world's top bathroom brand to China. Hansgrohe Sanitary Products (Shanghai) Co., Ltd., a wholly-owned Chinese subsidiary of Hansgrohe group. It was established in Shanghai Songjiang Industrial Zone. It is also the fourth wholly-owned factory invested by Hansgrohe abroad.
2000: Hansgrohe sponsored the publication of the Chinese version of <The History of European Bathroom Culture>, which once again shows Hansgrohe's long-standing bathroom culture.
2001: Hansgrohe celebrates its 100th birthday. Four offices have been set up in Shanghai, Beijing, Guangzhou and Chengdu; A total of 50 stores and 20 distribution points were set up, successfully occupying the high-end bathroom market; Many high-end residences and hotels use Hansgrohe products. The representative projects are Grand Hyatt Shanghai, Venice Shenzhen, Hilton Chongqing, Beijing Hotel, GE Times, etc.
Ⅳ. Kohler
Kohler, founded in 1873 and headquartered in Wisconsin, is one of the oldest and largest family businesses in the United States. Kohler is a global leader in kitchen and bathroom products, engine and power generation systems, furniture, home decoration, hotel services and first-class golf clubs.
As early as the 1930s, Kohler products had a deep relationship with China. Kohler sanitary ware was used in many famous buildings in Shanghai, such as Jinjiang Hotel and Da Guang Ming Cinema. In 1995, Kohler's China office was established in Hong Kong. Since then, Kohler has officially entered the Chinese market. In 1999, Kohler set up its headquarters in Shanghai and set up offices in Beijing, Shanghai, Guangzhou, Chengdu, Wuhan, Hangzhou, Nanjing and Shenzhen. Till today, Kohler has 10 factories, more than 500 regular exhibition halls and more than a dozen flagship stores in China.
Ⅴ. COSO
COSO originated in Germany. Since 1993 when it came to China to create a professional sanitary ware production base, COSO has created logical and beautiful product by virtue of German industrial design concept, first-class material, ergonomics benchmark, mathematical space, rigorous manufacturing and rational beauty. COSO has won the support and recognition of the majority of consumers. After years of development, COSO has become a global leading brand of healthy sanitary ware.
In the industry, COSO products take the lead in passing ISO9001:2000 quality management system certification and EU CE certification. It has won the titles of "China Top 10 Brands of Sanitary Ware", "China Top 10 Brands of Building Materials", "China Energy Saving and Environmental Protection Promotion Products", "China Famous Brand", and "China Original Bathroom Design Award in 2007”. In 2020, the company participated in Shanghai World Expo to fully demonstrate the value and strength of the brand.
Ⅵ. TOTO
TOTO was founded in 1917. It was initially named Toyo Pottery Co., Ltd., and then renamed TOTO Co., Ltd. In 1912, TOTO set up a laboratory specializing in the research and development of sanitary ceramics (at that time, sanitary ceramics products were very common in Europe and the United States, but wooden toilets were still popular in Japan, which was in great contrast with the advanced sanitary culture in Japan today). With the wide sales of these sanitary ceramics products, TOTO used its excellent products to challenge the traditional health concept which has been accepted by the public. Till today TOTO is still working hard for it.
TOTO is a manufacturer of sanitary ware and related equipment for civil and commercial facilities. Pursuing high quality and high technology, so that users can enjoy a sanitary, healthy and comfortable life is the consistent goal.
Ⅶ. Grohe
Friedrich Grohe AG CO. KG Group is a world famous supplier and global exporter of sanitary ware products and systems. Founded in 1936, it has branch offices, 12 production plants and 17 business subsidiaries in 140 countries around the world.
It adheres to the founder's spirit of precision and high quality. Its business covers most countries and its reputation spreads all over the world. Grohe has made remarkable achievements. With the company moving towards a new global environment, the total turnover of Grohe increased to 1.5 billion CNY in 2020, and the export volume accounted for 64.3% of the group's total turnover.