











1. Material:
The common faucet materials on the market today are: stainless steel, plastic, brass, zinc alloy faucet, etc.
Brass:
Brass is the most common material for faucet manufacturing. It is made of international standard H59/H62 copper. The casting adopts steel mold for gravity casting, and its wall thickness is uniform, generally 2.5-3.0 mm. The faucet made of brass is characterized by: no rust, durability, anti-oxidation, and sterilization effect on water.
Zinc Alloy:
The density of zinc alloy is lower than that of copper, and the handle is lighter. The surface of zinc alloy is easy to oxidize from the inner wall, and white oxide powder will appear on the surface. The strength is much worse than that of copper. The service life is not long, and the lead content is high. After one to two years, the faucet made of zinc alloy will oxidize and rot.
Plastics:
Plastic faucet has the characteristics of corrosion resistance, aging resistance, no rust, lead-free, non-toxic, odorless, high pressure resistance, light weight, easy construction, and low price. Plastic is not wear resistant.
Stainless Steel:
Now health and environmental protection has gradually become the new themes of modern life. Stainless steel is an internationally recognized healthy material that can be implanted into the human body. Therefore, kitchen and bathroom products with stainless steel as the main material have begun to become popular in European and American countries.
More than 90% of high-end faucets are made of brass. Brass is the most suitable faucet material and has antibacterial effect. Among them, H59 copper is most used. Its lead content is qualified. H62 copper’s lead content is less and more corrosion-resistant. Although stainless steel can be lead-free, but the quality is worse than copper due to the complex process and no antibacterial performance.
2. Faucet Manufacturing Process:
Most of the faucets on the market under $20 are made of sand mold casting, which is commonly referred to as "sand foundry". The internal structure of the valve body metal is loose, and it is easy to form interior defects such as stomata. It may not be found in appearance. However, after a period of use, defects such as water leakage, inadequate sealing and even more severe defects will occur. High-grade faucets usually adopt gravity casting, and the internal structure of the valve body metal is dense. For the same valve body, the weight of the products produced by the two processes is different, and the consumption of materials is also different. The weight difference between gravity casting valve body and sand casting valve body is about 1/4. Therefore, the same product has different prices.
3. Cartridge:
The faucet is turned on and off every day. The cartridge determines the service life of the faucet. At present, ceramic is the most suitable material for home use. The high-end faucet cartridge mostly uses ceramic, which is durable and can be opened and closed for 500000 times without leakage.
4. Water Hose:
The water inlet hose of the high-end faucet adopts pure 304 stainless steel. 304 stainless steel can bear high water pressure and ensure water purity.
5. Aerator:
The aerator of high-end faucet can give users a very comfortable bathing feel. The use of these accessories and materials can ensure the quality of the product. And whether or not to use the NEOPERL aerator is an important factor in judging the quality of the faucet.
6. Surface Technology:
The electroplated surface of high-priced faucets usually has a mirror-like feel. When you press it with your finger, the traces of hand prints will disappear immediately. Moreover, advanced environmental protection electroplating technology can prevent secondary pollution of products and ensure the purity of water.
7. Service Life:
The quality of high-end faucets is still good after 5 years of use, and meet all the national water-saving requirements. The durability, water-saving and environmental protection are its highlight value. Cheap faucets have a very short service life. After two or three months of use, quality issue may occur. And their safety is low.
8. After-sale Warranty:
High-end faucets are produced by professional manufacturers with a comprehensive after-sales service system. No matter the product has an accident or failure, the manufacturer or distributor will be responsible for solving it at any time. The manufacturers that provides higher price products are mostly more qualified, and they are very concerned about sales and reputation generated by each product.
All Aquacubic products that are finished in the production department have to pass their inspection first. There will also be the special inspection personnel to conduct an additional inspection to ensure that every product delivered to consumers is qualified.
The sink must be installed in the bathroom? Take a look at these locations that may be more suitable for sinks in your new home!
As a patient with lazy cancer, where to put the sink determines how many steps I have to take to wash my hands. Do I have to go to the bathroom after eating snacks and watching a drama at night, and getting up to wash my hands? Can't the sink be placed at the door? Put it under my nose? Or even in the balcony close to me? The answer is yes.
01. Where should the sink be moved out of the bathroom?
In order to make it easier for you to use, we will give you a few common places to put the sink. It can be installed in the hallway. There may be few people who think of this, but it is very common in Japan. As long as space permits, they will find a way to add a sink near the hallway so that they can wash their hands as soon as they enter the house. In addition, the sink can also be used as a partition of the entrance, so that even the entrance hall is made.
Put the sink on the aisle at the entrance of the bathroom. In this way, the dry and wet separations can be easily realized. Because the washbasin only occupies a small area, the total space will not become small.
If you are worried that the total appearance will be affected by putting it outside, and later storage can not be done well and it is messy, you can directly weaken it visually during the renovation by adding a wall to enclose it.
Wooden fences or glass can also be used as partitions, and cabinets can be used for storage on top.
The glass partition can prevent water from splashing everywhere when washing hands, and keep the space visually transparent.
If there is a gap between two rooms, you may consider putting the sink here. Such as between two bedrooms, between the kitchen and the bathroom, etc.
The advantage of this is that it can make full use of the space and avoid the waste of repeated settings. At the same time, it can also have the function of dividing space. It can also be installed on the balcony. Modern people spend most of their time in the living room. If you put the sink on the balcony closest to the living room, because there is plenty of light and the view is open, will you feel better when you wash your hands?
We can also put the washing machine next to it, throw the clothes in and wash them.
It is relatively rare to install on the dressing table. A dressing table can be placed in the bedroom to store all kinds of small things, and it can be combined with the sink. Sinks can be installed in the bathroom, outside the bathroom, or between the cloakroom and the bathroom.
According to our thoughts, these may seem strange, but starting from the owner’s living habits, it seems to be a reasonable design. Tip: The disadvantage of placing the sink outside the bathroom is the laying of water and sewage and waterproofing. Need to discuss with construction workers in advance and implement as required. Waterproofing should also be done well. It is recommended to follow the waterproof standard of the dry area of the bathroom, and apply waterproof paint at least 30cm high on the wall near the sink and on the floor. Secondly, there is no door to block the washbasin outside. If the storage is not done properly, the messy scene will be directly exposed. Therefore, the corresponding storage function must be done well, and the choice of towels even become stricter. Otherwise sit in the living room and see a messy washing area.
02. An easy-to-use sink can be like this.
In addition to moving the washbasin, its appearance and comfort should also keep up. You need to know the following knowledge. The style of the washbasin: Above counter basin and under counter basin. Above counter basin has a super good looking. In addition to square, round, oval, there may be other petal shapes to choose from. Generally they can be matched with high body faucets.
The under-counter basin is installed under the countertop and glued to the countertop from bottom to top. The advantage is that it is very convenient to clean the countertop. It is very common to have water on the countertop, you can easily wipe the water into the basin. It is more convenient to have a mirror cabinet, and the storage capacity can be improved a lot. Some mirror cabinets are fully enclosed, and some are partially open for storage. What kind of mirror cabinet to choose depends on your living habits.
Lighting Design.
Light is a top requirement for looking in a mirror. Most people may only install a mirror headlight above the mirror. In fact, the best way is to set up lights on the left and right sides of the mirror, which is about one person wide. Many professional dressing tables are set up in this way.
Double Basin Design
The double basin design can improve life efficiency. For example, a family of four has to go to school and work at the same time. And two people washing together is also very warm. Of course, double basins may only be suitable for large bathroom space.
Basin Style
It can be a basin or not. An artistic design. For example, in a retro-style home, try a bicycle wash basin.
There are also a few stacked stones. Is there a trace of natural "spring" style when the water runs out from the stone?
If you like minimalist style, consider this transparent glass wash basin.
If you want to realize the separation of dry and wet, but in the small area of the bathroom it cannot be realized, the above method can be considered. It is indeed completely reasonable and feasible to move the sink out.
Ordinary sink, also known as drawn sink, is formed by pressing and stretching a whole piece of steel plate.
The principle is similar to balloon blowing, so the bottom and corner of the water sink will be thinned properly,
usually made of 0.8mm thick steel.
The Handmade Sink is not made piece by piece by hand, but made by cutting, bending and laser welding the steel plate.
Will not change the thickness of the steel plate in the corner, the sink is very sturdy and solid. Usually this thickness is 1.2-1.5mm.
The appearance has strong sense of line, and the weight is much heavier.
The small R angle of handmade sink is not only better in appearance, but also higher in the utilization of the whole sink space.
1. X Grooves Design
Optimized bottom slope makes kitchen sink draining faster than normal sinks. Gently sloped bottom, fast draining and dry after using.
Handmade X grooves design, not only increase the design aesthetic but also easy to drain water in a minute.
Rear set 3.5”drain matches most kitchen appliances and fits the most Common Garbage Disposal System and unlocks extra space.
2. Nano Surface Technology
Nano surface as Lotus leaf. Water and oil flow quickly and no trace left.
Hardness of Nano surface: >8H Hardness of regular surface: >4.5H
Extreme craftsmanship focuses on every detail of the sink. Meets the UPC, cUPC, CE certification standards.
3. POSCO 304 SUS Material
Durable scratch and stain resistant stainless steel surface helps the beauty last.
Real 16 / 18 gauge material; never chip or crack. Commercial grade satin finish. Thick 304 Stainless Steel construction.
9 - 10 inches deep large sink can hold a lot of pots and pans. Experience the luxury brought by the global high-end manufacturing industry.
4. Soundproof Pad - 7pcs
Extra-thick coating and thick sound rubber pad assure exceptional noise reduction.
Insulative padding can dramatically reduce the noise causing by water dripping,making an excellent effect on noise elimination.
It can enhance the elegance and high quality of the kitchen, and it will become the focus of your kitchen. The high quality of the sink is praised and recognized by the most demanding customers
In China some people say that the struggle in the big city is so hard. Why not go to work in a small town? Is it worth struggling to afford a small apartment for a lifetime? I believe many people will find it worthwhile, because in big cities there are opportunities that cannot be found in small towns. The small apartment is not terrible. We can remodel it. As long as we have a dream, everything is possible. The owner Mr. Zhang who lives in Shanghai, like most ordinary citizens, worked hard all the way from the small hometown and finally settled in Shanghai and bought an apartment of 70 square meters. After having a child, Mr. Zhang took his parents from his hometown. A family of 5 squeezed into a small apartment. There was only one bathroom. Every morning and every evening, they were faced with taking turns to line up to take a bath and wash. They had no patience after some time. So he thought about making another shower room, and he can make the most of the balcony. Looking at the balcony that costs him a lot, only used to pile debris and dry clothes, Mr. Zhang felt it was a pity. He had heard of a case of transforming a balcony into a shower room before, so he wondered why not give it a try. If it fails, it will be dismantled after all. After talking to his wife, Mr. Zhang started serious research. After careful study, he summarized the following points to note:
First of all, it must be waterproof. Due to the special location of the balcony, the back may be the living room or bedroom. Considering that moisture may cause mold and peeling on the back wall, it is recommended that the waterproof layer of the wall where the shower is installed is painted as high as possible. The waterproof coating is generally brushed 2~3 times.
Second, make sure that the ground has a slope. The ground also needs to be waterproofed, and it is also necessary to ensure that the ground has a certain slope so that the sewage from the bath is discharged to the drain and will not flow back to the living room or other places.
Third, strengthen heat preservation. There is a big difference between the balcony shower room and the indoor shower room. Generally, the indoor shower room has only one wall with windows, and it can be kept warm by installing a heating system.
Finally, pay attention to the issue of privacy.
After studying how to install it, the next step is to choose a good shower room. Which products can meet this special demand? Because the balcony shower room is unavoidable from the wind and sun, we must pay attention to its material and anti-rust, anti-corrosion, and anti-fading ability. At the same time, pay attention to whether the frame is strong and stable, and the wall of the shower room must be strong.
After comparison, Mr. Zhang finally chose this shower room. This shower room is based on apartment space. The large apartment frame glass curtain wall, angular and cylindrical surfaces make the entire bathroom space richer.
At the same time, automotive-grade toughened glass has a thickness of 10MM, can withstand 700° high temperature, and has a high strength about 5 times that of ordinary glass, with outstanding impact resistance and thermal stability. In addition, EPM steel mold protection is added, so you don't have to worry about the risk of glass bursting. Even if it breaks, it will still stick to the debris to prevent the glass from splashing and hurting people. You can take a shower without restraint.
The door frame, handle and hinge outside the main body of the shower room are all made of high-quality aluminum alloy, and the surface should also be treated with anti-corrosion, anti-rust and anti-oxidation. In this way, there will be no signs of paint falling off after being exposed to the wind and sun on the balcony, and the structure is relatively strong and not prone to deformation.
In addition, the shower room is installed on the balcony. We will most worry about water will flow everywhere. This shower room has a overflow channel and magnetic tape, which can lock the water in all directions. Don't need to worry about getting the living room wet.
When decorating kitchens and bathrooms, many people worry about whether to choose an above counter sink or an under counter sink. The above counter sink and the under counter sink have their own advantages and disadvantages. Which one to choose depends on your own preferences.
There is a difference between the definition of the above counter sink and the under counter sink in the kitchen and bathroom, we will analyze them separately.
Kitchen Sinks
Above Counter Sink:
Above counter sink installation is the most common and simplest. The opening size of the countertop is slightly smaller than the size of the sink, so that the sink can be placed on the countertop, and then a circle of glass glue can be applied around it.
Advantage
The above counter sink is easy to install, and there is no need to worry about deguming if the load is too heavy. It is also convenient to change the sink later, just scrape off the glass glue and replace the sink. The space left under the sink can be about 3 cm higher than the under counter sink.
Disadvantage
It is inconvenient to clean the countertop in future use. The sides of the sink and the countertop are sealed with glass glue. After a long time, the glass glue is easy to mold and turn black.
Under Counter Sink:
There are also two ways to install the under counter sink. One is to make a hole on the counter slightly smaller than the outer edge of the sink. The other is to cut a hole according to the inner edge of the sink.
Advantage
The under-counter sink is very easy to take care of, and the countertop is easy to clean. It is integrated with the countertop and more concise.
Disadvantage
Relatively speaking, the installation of the under-counter sink is more troublesome. The gap between the countertop and the sink is bonded with a strong adhesive. If you want to replace the sink, you may need to replace the countertop as well. In addition, no matter how strong the glue is, and the load-bearing capacity is uncertain, there is a risk of falling from the counter. General washing and load-bearing of pots and pans will not cause problems.
Bathroom Basins
Above Counter Basin
The basin above the countertop is called the above counter basin. The installation of the above counter basin is relatively simple, just cut a hole on the countertop according to the installation drawing. Then place the basin in the hole and fill the gap with glass glue.
Advantage
Above counter basins are more beautiful in shape and have a wide variety of types. You can choose according to your favorite style. Easy to install and remove. If you want to replace it with a new basin, you can directly remove it and install a new one.
Disadvantage
One is that it is troublesome to clean the countertop, and there is a hygienic corner between the basin and the wall. The second is that the glass glue is used to bond the basin and the countertop, and the glass glue is easy to turn black or mildew after a long time.
Under Counter Basin
Advantage
The biggest advantage is that it is easy to clean, and there will be no hygienic dead angle. The basin area is more clean and tidy.
Disadvantage
Similar to the kitchen sink, it is still a problem of installation and replacement. And the style of the under-counter basin is fixed, so it is impossible to make more choices in the shape.
In summary, the above counter basin and the under counter basin have their own advantages and disadvantages. Simply put, people who want to clean more easily can choose under counter basins in both the kitchen and the bathroom. For the convenience of installation and replacement, or for those who have styling requirements for the bathroom, an above counter basin can be selected.
Of course it does.
What is a wall-mount faucet?
The wall-mounted faucet is to install the water supply pipe in the wall. The faucet is independent, and the wash basin is also independent. The washbasin does not need to be connected with the faucet, so there are more free choices in the washbasin shape. There are more diversified washbasin choices in different spaces and environments.
The place where the washbasin and the faucet are connected is usually the place where rust and bacteria breed the most. With separate faucets and wash basins, you don't have to worry about cleaning these locations.
Two Types of Wall-mounted Faucets.
Single Handle
1. Single Handle Single Hole Wall-mount Mixer Faucet
2. Single Handle Double Hole Wall-mount Mixer Faucet
3. Single Handle Wall-mount Mixer Faucet with Rough-in Valve
Double Handle
Double handle wall-mount faucet means that the hot and cold water are controlled separately. The left is hot and the right is cold, and the water outlet is in the middle. The copper color part in the picture is the concealed part.
The above are several common wall-mount faucets.
Advantages and Disadvantages of Wall-mount Faucet
Advantages:
1. Save space. In-wall faucets generally save space and free up space on the countertop.
2. Easy to clean. It is more convenient to clean the countertop.
3. It is highly decorative. It can increase the diversity of bathroom decoration and make the space more tidy.
Disadvantages:
1. The price is more expensive. The price and installation cost of the wall-mounted faucet is higher than that of the ordinary faucet.
2. Trouble with installation. Need to ask professional installers to install.
3. Trouble with maintenance. Many parts are installed in the wall. So if something goes wrong, it will be troublesome to repair.
Precautions for the Installation of In-wall Faucets.
1. Due to the concealed installation, the wall-mounted faucet must be installed in the wall together with the water pipe during decoration. Therefore, it is necessary to choose the faucet style before the decoration.
2. Do not remove the protective cover of the product during the decoration construction process to avoid damage to the product.
3. Be sure to pressurize the product to test whether it leaks. Make sure that the water pipe is connected correctly.
4. The sundries at the connection must be removed before installation to avoid blockage or water leakage.
5. The installation height is best controlled at a height of 15~20cm above the basin. The height above the ground is 95cm~100cm.
6. After installing the faucet, attach the wall tiles, etc.
So should you choose an in-wall faucet?
1. The wall-mounted faucet has high appearance and can be matched with various decoration styles according to your own preferences.
2. The wall-mounted faucet has a miraculous effect when used in a bathroom with a relatively compact space, which can save a lot of space.
3. The main concern for the wall-mounted faucet is maintenance, worrying about water leakage. In fact, the wall-mounted faucet is similar to the shower at home. The technology is very mature. It's already very popular.
We can make a comparison with ordinary faucets:
1. The connection method is different: ordinary faucet is connected to the water outlet through angle valve and hose to supply water. The wall-mounted faucet is connected to the water outlet through the concealed part to supply water. The concealed part and the water outlet are installed as a whole. As far as the connection method is concerned, there are fewer steps for the wall mount faucet.
2. Different accessories: common faucet accessories are angle valve, hose and faucet. The wall-mounted faucet accessories are concealed parts and faucets. Because there are no fittings such as angle valves and hoses, the possibility of water leakage from the faucet is lower.
The more complicated the connection method, the more connection points, the more hidden dangers. The hidden danger of in-wall faucets is actually smaller.
So you can buy the wall-mounted faucet with confidence. Ask a professional to install it. There is no problem.
After installation, its usefulness depends on the size of the basin and bathtub. Therefore, when purchasing, you must first know the distance between the basin / the bathtub and the wall. When selecting a wall mount faucet, the length of its spout must be selected correctly. The spout of the faucet should not be close to the edge of the basin or bathtub, otherwise it will affect the convenience of use. It is best to choose a faucet made of copper and a ceramic valve core, because of its good sealing performance, wear resistance, corrosion resistance and oxidation resistance.
In 2021 the U.S. kitchen and bathroom market is expected to reach $158.6 billion.
The United States is the world's largest importer of kitchen and bathroom products. For exporters of kitchen and bathroom products, the US market is very important. In January 2021, the National Kitchen and Bath Association (NKBA) released the "2021 Market Outlook Report". The report shows that the U.S. kitchen and bathroom industry will continue to grow, and the overall expenditure on kitchen and bathroom projects will increase in the coming year.
The industry predicts that after the overall decline of 5.9% in the U.S. kitchen and bathroom industry in 2020, it will reach 158.6 billion U.S. dollars in 2021, an increase of 16.6%, and an increase of 9% in 2018 and 1% in 2019. At the same time, it is expected that the growth of new houses will exceed 22%, while the renovation project will increase by 10%. High-end and mid-range projects are expected to lead, both of which are expected to increase by 20% than last year.
U. S. homeowners believe that the kitchen and bathroom area are twice as important as other spaces in the house. During the COVID-19 pandemic, the role of the kitchen is particularly prominent. 70% of homeowners believe that the kitchen is extremely important, compared to the previous proportion 64%.
With people's renewed attention to these family areas, the industry expects that large-scale interior renovation projects, including kitchen renovations, will usher in a new round of changes. This year may see a shift from the DIY in 2020 to the need for professional installers for kitchens and bathrooms. Many of these projects were delayed during the pandemic due to the risk of installation personnel carrying virus.
The report pointed out some motivations and inspirations to continue to promote the renovation project:
Although large-scale and more professional projects are planned to increase this year, saving money (attention 25%), project execution in leisure time (attention 23%), and health and safety issues (22%) are the main reasons for the increase in DIY.
Residents said that improving the aesthetics of the house was the main motivation for renovating the bathroom (16%) and kitchen (15%), followed by maximizing the quality and durability, and increasing the value of the house.
Houseowners pursuing cost-effectiveness and maximizing the use of existing budgets focus on renewing cabinets (52% of projects), plumbing (43% of projects), smart home products (57% of projects), and water purification systems (54% of projects) .
Family income and family member structure both affect the cost of kitchen renovation. "Mature families", that is, families with members over 45 years old and no children, have the highest percentage of upgrades to advanced functions in the kitchen.
Google search and social media are the main sources of inspiration for kitchen and bathroom renovations. Most owners stated that they rely on more than one source for inspiration. Young single homeowners or couples tend to rely more on Google and Instagram, while adults over 45 prefer to know what the other families did.
Economic factors that may affect renovation activities include:
1. A 10% increase in the operating rate of single-family housing in 2020 will drive a 17% increase in new residential building materials in 2021.
2. Of the total expenditure on residential kitchens and bathrooms, new houses accounted for 57%, reaching US$90 billion; residential renovations accounted for 43%, reaching US$68.6 billion.
3. Mortgage interest rates, which are about 1% lower than 2020, will continue to drive the home buying boom.
4. As the US houses for sale hit a record low, the price of stock houses will usher in price increase, which will indirectly promote house renovation rather than purchase of new houses.
5. The research report predicts that, driven by supply shortage and potential demand, total house prices will appreciate by about 31% between 2020 and 2023.
Don't think that after the new house is renovated, it will be as pleasing as the propaganda album. After the new house is renovated, a large amount of decoration waste will be generated. Dust, stains and marks from the decoration will be left on the walls and glass. Just like a baby who was just born, she will have a cute appearance after washing and putting on clean clothes.
Cleaning the newly renovated new home is an important task after decorating the new home. It is also the most laborious task. Facing a messy and unstructured new home, you don’t know where to start. Summarize the first cleaning experience after the renovation. We hope it will be of reference significance to you.
01 Cleaning Service
Those who are clueless about the cleaning of a new house can choose the cleaning service of a housekeeping company. Housekeeping companies have their own routines and tools for cleaning work. It is also a way to hand over professional cleaning work to them. The premise is to choose a qualified and high-quality housekeeping company. Services include: house dust removal, cleaning up decoration garbage, wiping glass, cleaning the floor, decontamination and disinfection of kitchen and toilet, cleaning up decoration traces, etc.
Notes on cleaning service
1. Organize a list of cleaning precautions, and list some areas that need special cleaning to avoid omissions. The decoration materials of each family are different. It is necessary to tell them some precautions, such as which places and areas cannot use water or chemical cleaners. These need to be communicated clearly with the housekeeping company before starting work.
2. Clearly state the materials of walls, floors, furniture, etc. that need to be cleaned, and let the staff prepare appropriate cleaning tools.
3. Communicate clearly about the tools needed for cleaning, which are brought by the staff and which are prepared by us.
4. Communicate clearly on the disposal method of the cleaned up waste, whether to throw it away or keep it somewhere.
5. Supervision, including whether to do a good job in dust prevention and cleaning of dead ends.
02 Clean Up by Yourself
Some people are unwilling to hand over their new homes to strangers to clean up, so they do their own cleaning work. Cleaning in person is nothing more than two things: preparing tools and clarifying the order of cleaning.
Preparation of Tools:
1. These will be used to clean the wall.
Small brush, sandpaper (to polish the paint on the wall), shovel, glass spatula, wet paper towel (to wipe the wallpaper), ladder.
2. These will be used to clean the ground.
Vacuum cleaner, mop, broom, nano sponge, rag (use a discarded old bed sheet; the size can be cut at will. It is big enough), dust cover, garbage bag.
3. Protective Equipment
Shoe covers, gloves, aprons, masks.
4. Cleaning Utensils
Detergents, maintenance agents, disinfectants, glue removers.
Cleaning Order:
Cleaning follows the order from top to bottom and from the inside to the outside.
Start cleaning from the room first, and then go to the kitchen and living room. The bathroom can be placed last, because the bathroom is a place where water is used repeatedly during the cleaning process.
Like kitchens and bathrooms, where there are wall tiles, they need to be cleaned from top to bottom to clean up the gaps in the tiles and the paint spots and glue stains on the surface.
03 Cleaning Techniques
During the decoration process, many traces of material adhesion will be left, and some cleaning skills are required.
Tape print: Use a damp cloth to wet it for a while before wiping.
Paint traces: Use paint remover or turpentine.
Marker marks: Wipe with a rag or damp paper towel with some alcohol.
Tile stains: Use special detergent for tiles to clean, paint and drawing pen fluid can be cleaned with turpentine, pyruvic acid or alkali.
Cement on glass: If it is a small cement stain, wipe it with a damp cloth and then scrape it off with a spatula. If it is a stubborn and large cement block, you can use the toilet cleaner to remove it. The effect is very good.
Tips: The toilet cleaner is acidic. Wear gloves when using it and don't think that the toilet cleaner is effective in removing cement and use it on tiles and marble floors. In addition, do not use alkaline soap at the same time when removing the cement on the glass.
04 Cleaning Can Be Done Separately.
In fact, if the new house cleaning work is done step by step during the renovation process, the subsequent cleaning will not be so laborious. Separate the cleaning work to these renovation steps:
1. After the water supply line and electricity are completed, and the walls and ground are leveled, the whole house can be cleaned and clean up the discarded decoration garbage.
2. When laying tiles, remind the workers to wipe off the cement stains on the surface of the tiles after laying the tiles.
3. After painting the wall and floor, you can clean it again.
If you have other new house cleaning experience, please leave a message to share with us.