upc kitchen faucet- China Manufacturers Factory Suppliers

The bathroom is full of water vapor after taking a shower? The bath water splashes on the ground? Sometimes you slip and fall accidentally? The bathroom without separation of wet and dry is simply maddening. The separation of wet and dry is an unavoidable matter in the bathroom. As long as we have a slight requirement for the quality of the bathroom, we will immediately take care of this matter. Because the separation of wet and dry in the bathroom is a very cost-effective job, it will make your bathroom life full of happiness in minutes. How to achieve the separation of dry and wet in the bathroom? For small-sized bathrooms, the partitions are too narrow, and they cannot be separated from wet and dry. Very tangled. So how to separate wet and dry in a bathroom of only about 5 square meters? Let's analyze how to separate wet and dry in a small bathroom!

 

Separated by Shower Curtain

The shower curtain is the simplest and most beautiful way to separate wet and dry in the bathroom. It can be said to be a must-have artifact for the bathtub. Use a shower curtain to separate the dry and wet areas of a small apartment, which is the most trouble-free and cost-effective. Whether it is an arc-shaped corner, or directly draw a straight line, make a water retaining strip and hang a shower curtain. It is very convenient. You can also frequently change the style of the shower curtain to a different style. But the disadvantage is that it cannot effectively block water vapor, and it is easy to grow mold and needs to be cleaned frequently.

 

Glass Partition

Compared with the shower curtain which can not effectively isolate the water vapor, the shower door is much more practical. More suitable for bathrooms equipped with showers. The shower door is mostly made of glass. Glass partition is a better choice. On the one hand, because the glass is transparent, it does not appear to be visually narrow. Second, because the glass has better water resistance, the effect of wet and dry partitions will be better.

 

Half Wall Partition

For small apartments, this is also a good choice. Not only can it perfectly achieve the purpose of separating dry and wet, but also use the half  wall to create its own style. Pasting retro-style or modern-style tiles on the wall can play a decorative and beautifying role.

 

The water pipe under the sink does not contact the floor.

In addition to working on the door, you can also separate wet and dry in places such as sinks and basins. The important point is to not to touch the floor! Bathroom furniture that is not exposed to water stains is less likely to be corroded, which increases the service life and is also easy to clean.

 

Move the Sink Out

The most complete wet and dry separation is to move the sink directly outside the door. Use part of the outside space to make the shower area inside the bathroom more spacious. In addition, the external washbasin also allows a family to wash without interfering with each other. The vanity and sink are placed outside the bathroom. Completely cut off the moisture in the bath. Small apartments can also use the walkway outside the bathroom to do so!

 

Do you like the bathroom with separate dry and wet function? The dry area and wet area of the bathroom are perfectly separated, which not only partitions the space, but also is visually more fashionable and rich in spatial level. Wet and dry separation has gradually become mainstream in bathroom design, so hurry up and give it a try!

The sink is the most important part for kitchen decoration. When cooking and washing dishes, 65% of the time is spent dealing with the sink. If you choose the wrong one and want to change, the countertops and cabinets will be changed accordingly, and you will regret it by then.

There are so many sinks, which one to choose without regret?

We summarized the advantages and disadvantages of the sink materials on the market, the experience of using single and double bowls, and the precautions for installation. Let you never make mistakes in the sink when decorating the kitchen.

 

Which is better for the sink material?

Common sink materials include stone, stainless steel, ceramics, etc.

 

Artificial Stone:

Advantages: good cleaning, seamless docking, various colors.

Disadvantages: the texture is not as hard as steel.

 

Many people say that the artificial stone large single bowl sink is easy to use. The capacity is large enough, comes with various drain racks, not afraid of scalding, and will not stain. Simply clean it for 2 minutes a day and it will be shining. If the countertop material is acrylic or quartz, it can be seamlessly connected, and there will be no annoying, moldy silica gel.

 

Granite:

Advantages: strong, scratch-resistant, wear-resistant, and high-temperature resistant.

Disadvantages: easy to scratch pots, bowls and tableware; need to clean up every day.

 

Granite is also a kind of stone, and it also has the characteristics of high hardness, wear resistance and high temperature resistance.

However, there are many disadvantages of granite. Because of its high hardness, if you drop porcelain utensils, they will break for sure.

Because it is super abrasion-resistant, to the degree of sharpening the knife, be careful when washing pots with paint on the surface. The sink can scratch the paint!

 

The stone has the characteristics of easy bleeding, especially when the sink has cracks. The colored liquid can easily penetrate into the stone. Colored liquids like soy sauce or corrosive liquids such as vinegar must not be poured into it, otherwise just wait for the dyeing later. It will cause big trouble in dish washing.

The most important point is that the stone breeds microorganisms at a super fast speed, so you have to wipe it every day like the bathtub!

 

Stainless Steel:

Advantages: anti-oil, anti-fouling, not afraid of acid and alkali, affordable, strong and flexible.

Disadvantages: prone to scratches and water stains (brushed stainless steel will be better).

 

Stainless steel has the characteristics of oil and dirt resistance, and because of its low hardness and easy processing, it has a variety of shapes. Many sinks are now integrally formed. A sink is stamped directly from one steel plate, which greatly saves production costs. Stainless steel is suitable for most families.

 

It is very important to choose a brushed matte surface, which is both dirt-resistant and wear-resistant. Imagine the water stains, handprints, and scratches left by washing dishes and pots after using the shiny polished stainless steel several times. It is simply horrible. The stainless steel sink of good quality has a uniform and fine brushed texture, and it feels very smooth, so that the oil can flow smoothly and will not remain. The inner corner of the sink should be rounded so that it will not hide dirt. To choose stainless steel, you must look for the SUS304 mark, and only the real 304 stainless steel can have quality assurance.

 

Porcelain:

Advantages: strong, acid and alkali resistant.

Disadvantages: heavier, easy to break, difficult to clean oil stains.

 

The biggest advantage of the ceramic sink is its good-looking appearance. Ceramic sinks are heavier than stainless steel sinks and lighter than stone sinks. The weight is relatively heavy, and it has an apron front, so installation is very laborious. And one of the most criticized aspects is that ceramics have a kind of adsorption ability for oil. If it is not cleaned for a while, the upper edge will become dirty. And it is also very laborious to clean.

But it's really beautiful.

 

Single Bowl or Double Bowl ?

Single bowl or double bowl, this is a topic that everyone is arguing about when choosing a sink. After reading the following analysis, you will probably know what suits you.

 

Single Bowl:

Advantages: easy to put in a large pot.

Disadvantages: ordinary faucet can not clean the entire sink(can be equipped with pull-down faucet); function is not partitioned (can be equipped with mobile sink).

 

There are so many fans for the big single bowl, because it is big and deep enough that a large wok can be stuffed. With a pull-out faucet, you can clean every corner of the sink.

Large single bowl generally refers to a bowl with a length more than 60cm and a width more than 42cm, otherwise it is a small single bowl.

 

However, a large single bowl is more suitable for a kitchen with an area larger than 4 square meters, and a small single bowl can only be selected for a kitchen with a small countertop.

Most of the sinks on the market are sold in sets. Many sink sets include accessories and gadgets. Although these accessories and gadgets are gimmicks under the guise of "giving away", they are actually added value of the sink. With them, the function of the sink can be more perfect.

 

For example, a rectangular colander can hold dishes, vegetables, etc. The drain holes are evenly distributed and can drain water quickly.

 

Some large single bowl sinks are also equipped with a hidden knife holder, which is more convenient and safe.

 

Double Bowl:

Advantages: double bowls, double functions.

Disadvantages: A single bowl is relatively small and can't hold large items.

 

Large double bowls can also hold large pots as long as the volume of the bowl is large enough. Can achieve the function of a large single bowl. The small bowl is used for water filtration, or install a water drying rack to wash fruits and vegetables.

 

The small double bowl is a bit inferior and can’t hold a wok or the like, but it’s still very convenient to have two bowls. The use of dual bowls saves time and effort and improves efficiency.

The double bowl originally has more functions than the single bowl, because most large double bowls will have accessories such as colanders and drying racks. It can be used in partitions, which is unmatched by a single bowl.

 

When washing vegetables, pots and pans, you can separate the two to avoid greasy vegetables. It can also be used separately when washing pots and pans alone. One sink for washing and one sink for draining water. And it can also save water.

 

One bowl for washing fruits and vegetables, and the other for washing dishes. 

 

The length of the double bowl is generally about 80cm. If the length of the counter is longer than 1.2 meters, double bowl can be installed. Many double bowls are designed as one big and one small. If you want to put the wok, the length of the large bowl should be more than 35cm, because the size of the wok is generally between 28cm-34cm. The disadvantage of the double bowl is that the sewer pipe is more complicated, and it is more prone to blockage and water leakage.

Therefore, if you choose a double bowl, it is necessary to buy a good strainer. If the inner wall of the drain is smooth, it is not easy to block. Some double bowls are equipped with threaded drain pipes, or relatively thin drain pipes, which tend to retain oil and cause unpleasant odors.

 

Above counter sink, under counter sink or one-piece sink?

Above Counter Sink:

All the edges of the sink are exposed on the countertop.

The cleaning of the above counter sink is very inconvenient. Over time, the glass glue on the edge of the sink will easily become moldy and black. The picture below may cause emotional upset, but the reality is always so cruel!

 

But its benefits are also very obvious, easy to install and cheap. And because edges are over the counter, the bearing capacity is very good. In case it is really disgusting one day and we can't stand it anymore, it can be easily removed as a whole. The space under the above counter sink is about 3 cm higher than the under counter sink. What does this show? It means that there is a large space under the sink for storage!

 

Under Counter Sink:

One wipe, everything is gone. The under counter sink is lower than the countertop. The water, residues, and vegetable leaves on the countertop will be in the sink with a single wipe. Super convenient. Generally speaking, the under counter sink is quite easy to clean. And it is very beautiful.

 

However, the installation of the under-counter sink is also more complicated. Not only do you have to prepare more installation costs, you also need to remind the decoration workers. Otherwise, it will generally be installed as an above counter sink.

 

In addition, once the under counter sink is damaged, it cannot be repaired and needs to be replaced as a whole. If the under-counter sink is used for a long time, the cracks will be moldy, so the mold-proof glue should be used between the under-counter sink and the countertop.

 

One-piece Sink:

Finally, the one-piece sink. One-piece sink refers to a sink that is an integral part of the countertop. It usually appears in the overall cabinet, and the countertop and the sink are seamlessly connected. The advantage is that there are no gaps, there is no need to worry about mold, and it is really easy to clean up. The disadvantage is that it is very troublesome to replace, which is equivalent to dismantling the entire counter.

 

In short, whether it is stone, stainless steel, or ceramics, whether it is a single sink or a double sink, it depends on the situation of your own house. As long as you choose the right material, bowl size and quantity, installation style, you can choose the best sink for your home.

How to choose bathroom accessories set?

 

1. Style matching: pay attention to matching with the overall decoration style of the bathroom.

 

2. The bathroom hardware should be purchased as a set, which is cheaper than the single purchase. One set of bathroom accessories with unified design of the series is more complete and stylish. Avoid mismatching.

 

3. The material is preferably stainless steel, and the surface is chrome-plated. The biggest advantage of stainless steel material is strong stability, high density, heavy weight, high ductility and plasticity. And it can be designed in various shapes. It is plated with a layer of metallic chromium, which is bright, waterproof and rust-proof.

 

4. Pay attention to these details when choosing.

 

Surface Finish

Surface plating determines if towel racks can last forever. Generally speaking, the brighter and finer the surface, the more uniform the color, and the better the mirror effect, the better the coating quality.

Product Base

Pay attention to the material of the base. The material of the base determines the strength of the load-bearing capacity. Most manufacturers use zinc alloy materials. If it is stainless steel, it depends on which standard stainless steel is used.

 

Surface Touch

Good bathroom accessories have flawless appearance. Touch can make a certain judgment on the product quality. Smooth touch without burrs is good surface treatment performance. Pay special attention to corners, welding positions, etc.

Of course it does.

 

What is a wall-mount faucet?

The wall-mounted faucet is to install the water supply pipe in the wall. The faucet is independent, and the wash basin is also independent. The washbasin does not need to be connected with the faucet, so there are more free choices in the washbasin shape. There are more diversified washbasin choices in different spaces and environments. 

The place where the washbasin and the faucet are connected is usually the place where rust and bacteria breed the most. With separate faucets and wash basins, you don't have to worry about cleaning these locations.

 

Two Types of Wall-mounted Faucets.

 

Single Handle

1. Single Handle Single Hole Wall-mount Mixer Faucet

 

2. Single Handle Double Hole Wall-mount Mixer Faucet

 

3. Single Handle Wall-mount Mixer Faucet with Rough-in Valve

 

Double Handle

 

Double handle wall-mount faucet means that the hot and cold water are controlled separately. The left is hot and the right is cold, and the water outlet is in the middle. The copper color part in the picture is the concealed part.

The above are several common wall-mount faucets.

Advantages and Disadvantages of Wall-mount Faucet

Advantages:

1. Save space. In-wall faucets generally save space and free up space on the countertop.

2. Easy to clean. It is more convenient to clean the countertop.

3. It is highly decorative. It can increase the diversity of bathroom decoration and make the space more tidy.

 

Disadvantages:

1. The price is more expensive. The price and installation cost of the wall-mounted faucet is higher than that of the ordinary faucet.

2. Trouble with installation. Need to ask professional installers to install.

3. Trouble with maintenance. Many parts are installed in the wall. So if something goes wrong, it will be troublesome to repair.

 

Precautions for the Installation of In-wall Faucets.

1. Due to the concealed installation, the wall-mounted faucet must be installed in the wall together with the water pipe during decoration. Therefore, it is necessary to choose the faucet style before the decoration.

2. Do not remove the protective cover of the product during the decoration construction process to avoid damage to the product.

3. Be sure to pressurize the product to test whether it leaks. Make sure that the water pipe is connected correctly.

4. The sundries at the connection must be removed before installation to avoid blockage or water leakage.

5. The installation height is best controlled at a height of 15~20cm above the basin. The height above the ground is 95cm~100cm.

6. After installing the faucet, attach the wall tiles, etc.

So should you choose an in-wall faucet?

1. The wall-mounted faucet has high appearance and can be matched with various decoration styles according to your own preferences.

2. The wall-mounted faucet has a miraculous effect when used in a bathroom with a relatively compact space, which can save a lot of space.

 

3. The main concern for the wall-mounted faucet is maintenance, worrying about water leakage. In fact, the wall-mounted faucet is similar to the shower at home. The technology is very mature. It's already very popular.

 

We can make a comparison with ordinary faucets:

1. The connection method is different: ordinary faucet is connected to the water outlet through angle valve and hose to supply water. The wall-mounted faucet is connected to the water outlet through the concealed part to supply water. The concealed part and the water outlet are installed as a whole. As far as the connection method is concerned, there are fewer steps for the wall mount faucet.

 

2. Different accessories: common faucet accessories are angle valve, hose and faucet. The wall-mounted faucet accessories are concealed parts and faucets. Because there are no fittings such as angle valves and hoses, the possibility of water leakage from the faucet is lower.

The more complicated the connection method, the more connection points, the more hidden dangers. The hidden danger of in-wall faucets is actually smaller.

So you can buy the wall-mounted faucet with confidence. Ask a professional to install it. There is no problem.

After installation, its usefulness depends on the size of the basin and bathtub. Therefore, when purchasing, you must first know the distance between the basin / the bathtub and the wall. When selecting a wall mount faucet, the length of its spout must be selected correctly. The spout of the faucet should not be close to the edge of the basin or bathtub, otherwise it will affect the convenience of use. It is best to choose a faucet made of copper and a ceramic valve core, because of its good sealing performance, wear resistance, corrosion resistance and oxidation resistance.

As a manufacturer of sanitary products for more than 11 years, we have seen many customers whose bathrooms are really full of functions. Although it is small, the functions are still very diverse. Have to admire!

 

Modern decoration requires both practical functions and individual style, so the budget is often difficult to control. The bathroom space usage rate is high. If you can save it everywhere, rework and repair will occur, and the gains will outweigh the losses. At the same time, the cost of furniture and decoration can also be spent more or less. The following are some small details on the bathroom decoration, which can save costs time and time again!

 

1) Waterproofing is essential for walls. 

Waterproofing in the bathroom is very important, not only to choose high-quality materials, but also to ensure professional painting. The wall waterproof in the wet area should be at least 180cm above the ground and 50cm for other places. The ground waterproofing generally needs to be brushed twice and a 24-hour closed water test should be carried out. Wall corners, water pipes, etc. should also be carefully done.

 

Ceramic tiles are the highlight of bathroom decoration. And the wall area is large. You can choose relatively economical tiles to ensure the waterproof performance. You can also directly paint with waterproof paint where it is not in the shower area. It will reduce cost.

 

Mosaics with rich patterns can enhance the visual aesthetics of the space. And to reduce material costs and manual laying costs, mosaics can be laid only on key positions. Tiles, waist line and top line can be selected according to your own needs to control the cost of decoration.

The original light-body wall is removed and replaced with a transparent glass wall, which expands the visual area of the space and also saves costs.

 

Mosaic paving requires a high labor cost, so you can find a large mosaic-like wall tile to pave the wall, which can save a lot of money. Since there are fewer gaps between large-size mosaic tiles, the amount of caulking agent is correspondingly reduced, which is often used for reference and selection in home decoration.

 

2) The floor area should be beautiful and non-slip.

Safety should be placed in the most important position, and slip resistance should be considered in the selection of floor tiles. At the same time, the human body will directly touch the ground, so the quality of materials should be paid attention to. Bright floor tiles are relatively slippery, so use them as little as possible in the bathroom, and use matte floor tiles or tiles with good anti-slip properties.

 

When paving the floor tiles, the slope must be appropriate, and the floor drain must be the lowest point so that the water can flow smoothly. The floor tiles should be made of whole tiles as much as possible, and the gap between the tiles should be controlled at about 2mm.

 

The area of decorative tiles on the ground is smaller than that of the wall. The use of interval paving can save the budget, and only use the same pattern of tiles to be separated by more than one tile.

 

If you want to create a low-cost bathroom with a natural texture, you can use wood-grain tiles instead of waterproof solid wood, which also has the characteristics of natural patterns, elegant colors, and easier matching with other sanitary wares.

 

Paving decal tiles in the bathroom can improve the monotonous bathroom style. In the actual construction process, the cost of laying decal tiles is much cheaper than mosaic.

 

When special-shaped handmade tiles are laid on the ground, they should be from the inside out, the gap between the tiles should be controlled within 8mm, and the height of the caulking agent should be level with the tiles. The paving of this kind of tiles should be carried out in sequence according to the serial number on the back to avoid waste caused by rework.

 

3) Cleverly arrange the exposed and concealed sanitary ware. 

The bathroom is a place where multiple channels of water and electricity converge. In the early stage of renovation, it is necessary to choose quality water pipes, wires, etc. And the wiring must comply with the regulations to avoid water leakage due to design and material selection problems.

As the space expands and functions increase, there are more and more electrical appliances in the bathroom. If you want to install smart toilet lids, integral shower rooms, massage bathtubs, multi-functional bathroom cabinets, etc., you must first make the sockets during the decoration to avoid rewiring in the future and increase the trouble.

 

The plumbing renovation of the bathroom is most laborious. If you want to save this part of the cost, the pipeline must be open-lined, without slotting, and future maintenance can also save a lot of costs.

In addition, avoid excessive wiring when rebuilding waterways and circuits. Use multi-hole sockets as much as possible on the panel of the socket. Under the premise of the same number of wires, you can plug in more electrical appliances. The wiring of the space is reconstructed with open wires, and the wires are routed from the top. The outer wall of the pipe is painted with waterproof paint, which saves a lot of labor costs and is also convenient for maintenance.

 

The bathrooms are uniformly decorated in black and white tones, simple and generous. The upper and lower water pipes of the sanitary ware are made of metal material, which has a long service life and is not easy to be damaged.

 

The space matching has been cleverly designed. The cement wall is matched with solid wood floor tiles, which is elegant and warm, satisfying practical functions and beautiful.

 

4) Shower Area

The quality of the glass used in the shower room is closely related to the safety of the bathroom. Fine tempered glass is generally difficult to break, and it will not hurt people when broken. Therefore, when choosing, don't be greedy for temporary cheapness, and try to choose high-quality, well-reputed brands.

The frame of the shower room is usually made of aluminum alloy, and the surface is sprayed with plastic, so it is not corroded or rusty. The thickness of the main frame aluminum alloy is preferably 1.1mm or more, which is not easy to deform.

 

In addition to professional brand shower rooms, the shower area can also be separated from dry and wet areas with various partitions. Common glass partitions only need to be installed on one side when combined with the wall, which saves costs by using less materials.

At the same time, the installation of the shower room can be omitted. The base of the shower room mainly plays the role of heat preservation and drainage, and the material is mostly acrylic.

 

The shower area is separated by a glass wall, and the ground is transitioned by steps to create a semi-enclosed shower space. The glass partition is directly fixed with hardware without reaching the top, which gives the space better permeability.

 

A wall serves as a partition, separating the wash area from the shower area. The interior of the wash area is covered with ceramic tiles, the exterior is painted with waterproof paint, and the key parts are strengthened.

 

5) Wash Area 

The floor drain is most commonly used for sink, and the wall mount type can be used for more advanced spaces. It is best to have all S-bends to prevent upward odor. Basins are divided into above-counter basins, under-counter basins and wall-mounted basins. Above counter basins for households are more suitable and easy to install. The under counter basin is suitable for a large area bathroom, and the installation is relatively complicated.

 

Small-space or low-budget families can abandon the overall bathroom cabinet, and use a transparent iron frame to save space and leave more space for the legs. Mirror cabinets and recessed cabinets are more suitable for small spaces and complete the storage function of the bathroom. To reduce the cost of decoration, you can choose a single color and simple style in the decoration, and match it with retro copper-colored, metal-colored faucets or mirror lights to create highlights.

 

Build the washstand with cement, and place storage baskets underneath. The wall-mounted faucet is highly decorative, but the size must be measured accurately in advance, otherwise it cannot be installed, which will affect the use.

 

There is no special furniture under the basin; only metal racks are used to save costs and place toiletries.

 

Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We have rich experience and passion in bath and kitchen industry and appreciate your contacting and business. Look forward to cooperating with you. Thanks a lot!

There have always been a lot of worries about the bathroom. Generally, the size of the bathroom in a residence is 5-10 square meters, or even smaller. But to be comprehensive, toilet area, wash area, shower area are indispensable. The bathroom layout, design, and storage are not completely puzzled. Today we will teach you how to lay out the bathroom. Let's take a look at how other people solve such troubles!

For different bathroom spaces, the layout methods are different. Rectangular bathrooms are the most common, because such bathrooms are more convenient to separate dry and wet areas. Generally from the outside to the inside are: wash basin, toilet, shower room. The shower room is generally partitioned by a glass sliding door, which is very convenient to use.

It is difficult to design a square bathroom. Generally, the space is increased by reducing the length of the shower room. In the small square bathroom, the shower room is basically arranged on the opposite corner of the door, and then the wash basin and toilet are arranged in the corners on both sides. If the space is too small, you can only consider removing floor cabinets, bidets, bathtubs, etc.

Plan irregular spaces according to the size.

For irregular shape bathroom, item layout size is the key. According to the slight difference of different corner sizes, different functional areas can be planned, so that all the spaces can be used rationally.

For example, by adjusting the shape of the washstand or shower room, more space can be obtained.

Layout according to dry and wet separation:

The difficulty in planning a small-sized bathroom is the separation of dry and wet. If the wet and dry separation is handled well, the bathroom grade is also improved a lot. The following dry and wet separation methods are more common and reliable. You might as well learn from it.

Shower curtain + bathtub + water retaining strip:

This is the most economical way to separate wet and dry area. Modeling and installation are very simple. But take care to keep it dry after use. Otherwise, it is easy to mold and breed bacteria.

Shower room / retractable shower room:

It has good lighting and flexibility. When it is fixed in a corner, the glass partition can be unfolded, and it can be put away when it is not used, which can save a lot of space.

Glass partition + water retaining strip:

The glass partition material can well maintain the lighting effect of the bathroom and relieve the depressed feeling of the entire space. Generally used with water retaining strips. The elongated bathroom is very suitable. Glass partitions can also be used with low walls to ensure the privacy of the space and bring more light.

Move the sink out:

Move the original washing area directly to the outside of the bathroom. An interior door easily realizes the separation of dry and wet. The shower area and toilet area are reserved inside. It is also very convenient to arrange.

The bathroom storage can be squeezed out. 

The location of the bathroom is not large, but if you make clever use of every hidden space, you will be pleasantly surprised to find that the space has become much larger!

Storage behind the door. Install a few bars behind the door to put towels or clothing. A hard wooden board is fixed above the door to store some infrequently used items. Don't let the toilet cosmetics be placed randomly. You can find a tray to store them neatly. The picture on the right is the correct way.

The double-layer shelf can hold more cosmetics.

Fix a magnet bar next to the mirror. Now you can put small hairpins and cosmetic tin boxes there. Never worry about losing your hairpin every day.

All kinds of beautiful jars and glass bottles can show their usefulness. Put in some long cosmetics such as powder brush and mascara. New skill!

Use a clip to hang the toiletries in a position within reach, which is easy to access and use.

Create an open bathtub. Place the toiletries in the bathtub sides and close it when not in use. There is no clue at all.

Place a ladder shelf with storage basket next to the bathtub. All items such as clothes, towels, and washing utensils are collected. 

Especially suitable for families with babies. From now on, the toys will not be scattered all over the place.

The bathroom is very important and part of our lives. Let us take it seriously. Love life, start with a perfect bathroom.

Many years later, people who use black frame shower doors and windows will surely be grateful for this choice.

The black frame has always been loved by people because of its beautiful industrial style. We believe that it is only a matter of time before people find the elegant beauty of a bathroom with black frame shower doors and windows. Black-framed doors and windows made of aluminum or steel look very beautiful in the factory. Whether it is used in the bathroom or other places, it will receive fascinating results. Let's directly look at 8 display pictures that reflect the advantages of black frame shower rooms. I believe there is always one suitable for you.

 

1. Black frame bathroom doors and windows are the eye-catching emperor of the decoration industry!

 

Even with Karaka marble floors and expensive dressers decorated with quartz, the star of the bathroom is still the brass shower head and black aluminum bathroom doors and windows. If you are looking for exquisite bathroom decoration, it is really black framed doors and windows.

 

2. The black frame shower room doors and windows give a unique industrial style.

 

A black framed shower door with coverless lamps and a modern yellow dressing table can create an attractive industrial atmosphere. The high glass window design not only facilitates daylighting but also ensures privacy.

 

3. The black frame doors and windows show the beauty of elegance.

 

When the black frame doors and windows reach the roof directly from the ground, they can make the small room look taller than it actually is. Matched with herringbone parallel pattern floor tiles, a small white marble dressing table and a tall dressing mirror. The overall effect is so elegant and restrained.

 

4. The black frame shower room makes the large white areas appear clearer.

 

White floor tiles + white bathtub + white sink, the bathroom can easily become monotonous. At this time, we can use black frame shower room and black hexagonal tiles in the shower room to enhance the contrast with the white environment, making the whole room more layered and three-dimensional. Finally, brass showers, brass faucets and geometric chandeliers are used to make the finishing touch.

 

5. The black framed doors and windows make the walk-in shower room stand out.

 

An open shower saves space in a small space. It is hard to imagine how elegant a shower room with framed doors and windows is! Due to the good closure of the black frame doors and windows, the slate wall panels and the mosaic wall tiles on the upper wall embellish them, the whole shower room is like a small room fully decorated.

 

6. A shower room with a black frame is simply too modern.

 

Patterned floor tiles, black framed shower doors and windows, and a black dressing table, one of the countless bathrooms in London, looks perfectly adapted to the urban environment in which it is located.

 

7. The black frame shower room can be easily connected with different styles.

 

Hesitating between your favorite pastoral style, industrial style and modern style? The black frame shower room will help you solve it! It can act as a bridge between styles, helping different style elements to seamlessly match together.

8. The black frame shower room are timeless decorations.

 

The black frame shower room may only be fresh for a short period of time, but it does not mean that it will soon become obsolete. This is a decoration with permanent vitality. Especially when paired with other classic elements, like mosaic tiles, subway tiles and some traditional decorations, the black frame shower room has a simple yet elegant charm.

 

Thanks for viewing our website. Hopefully you can find your interested items. Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business. We are one-stop supplier of bathroom and kitchen products.

The bathroom at home is one of the most frequently used places, and the quality of the bathroom directly determines the quality of life.

Bathroom products that can be used for a long time are normally: toilets, bathroom cabinets, wash basins, and bathroom hardware.

 

Toilet

There are two types of toilets: split type, one-piece type and wall-mounted type. According to the sewage discharge method of the toilet, it can be divided into back flush type, siphon type, jet type, and super spiral type. When purchasing, choose according to different spaces and waterway positions.

 

Although there are many types, you can refer to the following methods when purchasing.

1. Whether the gloss of the toilet itself is good enough. The glossier, the better the compactness;

2. It is not that the smaller the water tank, the more water-saving. Some water tanks are not small, but the water storage line is low. The flushing performance is very good, and it is also very water-saving. Generally, the water tank is 6 liters of flushing water, and the two choices of 3 liters and 6 liters is better;

3. Check whether the internal structure is compact, sensitive and reliable.

 

Bathroom Cabinet

Bathroom cabinets are an important item in bathroom selection, and there are many types. According to the material, it can be divided into solid wood bathroom cabinet, ceramic bathroom cabinet, PVC bathroom cabinet, MDF bathroom cabinet, glass bathroom cabinet, stainless steel bathroom cabinet and so on.

What does the most practical bathroom cabinet look like?

 

 

How to choose?

1. Generally, a complete set of bathroom cabinets needs to be checked for deformation;

2. Check whether the surface is cracked and the glaze is smooth and even;

3. When the cabinet door is opened and closed, check whether the door hinge has a sound or smooth;

4. Use a pen to scribble on the cabinet and wipe it off to check its anti-fouling ability.

 

The bathroom cabinets are rich in styles, so you should decide what material you want when choosing. The specific styling is determined according to personal preference and home decoration style.

Wash Basin

The wash basin is responsible for the appearance of the bathroom. The type and style of the washbasin are also dazzling, such as table top, column type, wall type. And cabinet body are also very particular.

Desktop: Above counter basin or under counter basin?

Above counter basin: High-end, easy installation, rich product selection, easy to disassemble and repair. But water is easy to leak into the sink cabinet and the corners. If the installation is not careful, there will be exposed glass glue, which will turn yellow and black after a long time.

 

Under-counter basin: low profile, integrated with the countertop, beautiful, easy to clean, no dead ends. It is easy for the water basin to deviate from the middle position of the sink cabinet. It is necessary to choose a faucet with a suitable water outlet angle. Under-counter basin is inconvenient to disassemble.

 

Column type: does not occupy space, especially suitable for installation in toilets with insufficient space.

Wall-mounted type: as the name suggests, it is used on the wall, compact and not occupying space, simple and stylish.

Basins can be made from different materials. Stainless steel, porcelain, marble, and glass all have pros and cons. Just pick the one that suits you.

How to choose?

1. Look at the manual first. If it is a glazed basin, the lower the water absorption, the better the quality.

2. Faucet holes. Most porcelain basins have a single hole for mixer faucets. When buying a washbasin, you can ask the supplier to make the hole. If you make the hole yourself, it is likely to destroy the entire washbasin.

3. The high-quality washbasin has a smooth glaze, no pinholes, no lack of glaze, etc.

Striking with a hard object will make a crisp sound.

4. In order to ensure that after quality problems occur, the seller can repair them in time, it is better to keep the invoice issued by the seller.

Hardware

Hardware accessories include: faucet, shower, shelf, angle valve, soap net, clothes hook, etc.

They are not large, but frequently used things. If you pick them well, it will not only be easy to use, but will also improve the quality of the bathroom.

How to choose bathroom hardware?

1. First look at whether the coating is good. Generally, the brighter the surface, the more obvious the mirror effect, and the more rigorous the process.

2. The packaging design is beautiful, and the quality inspection certificate, installation manual, and related after-sales manual are available, indicating that the qualifications are complete.

3. After holding the hardware for 2 or 3 seconds, loosen it. If the fog and traces disappear quickly, it is made of copper, heavy weight, thick and durable.

ORB folding Walll-Mounted pot filler kitchen faucet Model No. : CF25045 Solid Brass Kitchen Wall Mount Pot Filler Faucet Swivel Spout Chrome Kitchen tap Two 360-degree rotating structures, Very wide range of activities.Passed 24h salt spray test, 200 hours neutral salt spray test, and pressure system test.Removable... China Pot Filler of with CE

Faucet Water Purifier Filter 7-Layer Purification For Home Kitchen : Amazon.ae: Kitchen Skip to main content.ae Hello Select your address All EN Hello, sign in Account

12 - Series 1.0 Washbasin Trough Sink Two User Stainless Steel Hand Wash Station

25/11/2022· Top 8 Best Faucet Water Filters Reviews New Wave Enviro 10 Stage Water Filter System PUR FM-3700 Advanced Faucet Water Filter Dupont WFFM100XCH Premier Faucet Mount Drinking Water Filter Waterdrop 320 …

Showing results for "farm house sink 7 inch depth" 1,386 Results Sort by Recommended 36 Inch True Fireclay Farmhouse Kitchen Sink Front Large Deep Single Bowl With Bottom Grid And Drain by GETPRO

Warranty: All our faucets are offered with a 2-years limited warranty and a 30-day return policy. Our faucets/shower set:-- Blends quality and durability with elegant style.-- Equipped with drip-free ceramic disc valves for long life and smooth feel.-- Premium quality

Decdeal Foldable RV Faucet Rotating Single Handle Deck/Wall Mounted RV Kitchen Tap. Very space saving Folding Faucet. 180° rotate up and down and 360° horizontal rotation, very flexible and practical to use. All copper water faucet with chrome plating, nice quality and good looking. Durable purely copper valve is functions well.

ModernLife Edge WallMount Lav Faucet Trim 25759IN-4ND-CP Rs.16,700.00 Fore Arc Wall Mount Cold Only Trim Assy 27489IN-4ND-CP Rs.3,150.00 Fore Tri Wall Mount Cold Only Trim Assy 27487IN-4ND-CP Rs.2,730.00 Fore Line Wall Mount Cold Only Trim Assy 27488IN-4ND-CP Rs.2,940.00 Beitou Wall-mount Lavatory Faucet 99876IN-4ND-CP Rs.85,370.00