According to the current fashion trend, the kitchen faucets of major brands are based on the hard strength (cartridge and material), They have also started to work together with their soft power (technical content, appearance design, etc.), so if you want to reach the level of one-step purchase, It is necessary to understand what the modern kitchen faucet looks like with both soft and hard strength. In a word, it can meet the daily practical functions of the kitchen, in line with the modern "everything is intelligent" home trend, but also have a bright appearance design.
1. Single Handle Faucet
The faucet is a hot and cold water mixer. Turn the handle to choose hot or cold water.
2. Double Handle Faucet
Water flow can be controlled separately for cold and hot water.
This is also called an 8 inch model.
3. Widespread Faucet
Two handles and water spout are separate from each other.
4. Touchless Sensor Faucet
No need to touch or turn the lever to make the faucet work.
Faucet can also be in manual or automatic mode.
5. Wall Mount Faucet
Faucet is installed in the wall. More worktop space around the sink with the standing faucet.
6. Bridge Kitchen Faucet
Two handles kitchen faucet with pull down sprayer.
Elegant design and classic style complement any kitchen.
7. Pull Out Kitchen Faucet
The sprayerhead can be pulled straight out.
Large pots can be easily filled with this function.
8. Pull Down Kitchen Faucet
The sprayerhead is similiar to the pull-out faucet.
With the high arc, it is more suitable for dish cleaning.
9. Beverage Faucet
360 degrees swivel spout: Adjust to any angles with easy access to any areas of the sink.
Drip-free performance; Lead-free brass body.
10. Faucet with Side Sprayer
The side spray is separate from the faucet itself and is an alternative to the pull-out/pull-down faucets.
This is added to an extra sink hole.
For a more useful and faster-drying bathroom, toilet, shower, and washbasin must be separated.
The toilet, washbasin, and shower located in three areas allows people to use them separately.
This design has more advantages.
1. Dry area always being dry.
Using a three-separated bathroom, when the shower is completely independent, the sink and toilet area will not be affected by the shower. Cleaning is also more convenient.
2. More people can use the bathroom at the same time.
In the morning some want to use the toilet and some want to brush their teeth. If there is no separation, as long as one person enters, the whole family will have to wait.
However, with the three-separated bathroom, everyone can save time and use separately.
Three-separated Bathroom Layout
If the bathroom is a long and narrow shape, it is recommended that the toilet, washbasin, and shower are arranged in a row.
Usually the most frequently used washbasin will be placed in the middle, so you can come in and use it at any time. To the left and right are the shower area and toilet.
The toilet and the shower area can also be arranged on the same side, and the washbasin is placed on the opposite side to form a T-shaped arrangement. Hotels often use this layout, which is relatively confidential, but does not waste space.
If you want to add a bathtub, because the bathtub is used less frequently, it is usually placed in the corner next to the washbasin.
But to be honest, the three-separated bathroom requires a relatively large area. The partition wall will be added, and the distance between the shower, toilet and washbasin will be increased. If three separations are used, it is bound to reduce the size of other spaces.
Design and Construction Considerations
1. The minimum shower area wide is 90cm.
The shower area should be kept wide enough for the person to turn around, and hands should not touch the wall easily when showering. It is convenient to have a width of at least 90 cm.
2. The toilet area is at least 70cm wide.
If you don't want it too narrow when going to the toilet, the wall should not be too close. Starting from the center of the toilet, leave a width of 35 cm or more to the left and right to make it easy to use.
The human action is to turn around and sit down on the toilet, so 60 cm of moving space is required in front of the toilet.
3. If the toilet is adjacent to the shower area, the water pipe is easy to install.
When the toilet and the shower area are adjacent to each other back to back, the pipeline can be hidden in the partition between the two, and the distance of the pipeline can be shortened.
4. There is no need to install a floor drain in the toilet and washing area.
Since the three-separated bathroom has completely separated the toilet, washbasin and shower, and now fewer people will flush the floor. Therefore, it is only necessary to install a floor drain in the shower room. Blocking with waterproof strips can ensure that the toilet and washbasin area remain dry. For floor cleaning in dry areas, it is recommended to wipe with a mop.
5. Reduce the area of waterproof coating.
Ordinary bathrooms are usually recommended to do waterproof layer on the walls and floors of the whole room due to the spread of moisture. However, in the three-separated bathroom, there will be no excess water vapor in the toilet and washbasin area. It is recommended to do waterproof only half-height walls.
Then we take a look at the examples of the three-separation bathroom.
This is a typical hotel bathroom layout. The sink is in the center, and the toilet, shower area, and bathtub are placed on both sides, forming a U-shaped layout. Suitable for use in large-area bathrooms.
The doors of the shower room and toilet area are designed with metal mesh, which is ventilated and can be cleverly hidden.
The walls and floors of the whole room are paved with the same marble. With metal accessories, the overall style is particularly high-end.
With the double washbasin design, two people wash at the same time without being crowded. With double-sided mirrors and wall lights on both sides, it forms a balanced and symmetrical design.
The retro tile floor, the decorative pillars on both sides of the countertop, the delicate and elegant chandeliers, the natural and romantic simple European style.
Off-white is selected as the main color of the space, matched with earth-colored walls. The calm atmosphere makes the bathing space more comfortable and relaxing.
If you don't make a door, just use cement partition to separate the shower area or toilet, which can reduce the visual barrier.
A sliding door is used between the shower area and the bathtub, which can be ventilated at any time and can achieve the effect of privacy.
The washbasin area is in a single row. Since it is isolated from the shower area, it is relatively dry. The dressing storage is also set together, making it easier to use.
The wash area is in line with the toilet area. The bathtub is next to the shower area. Effectively separate the dry and wet areas. At the same time, hooks are installed on the wall for the towels and bathrobes.
If the bathroom does not have a window, you may wish to use colors and lights to brighten it up. The orange half-wall design makes the space bright and vibrant. Place some flowers and plants to make it more vibrant.
The wall is made of cement gray, so even if water drops splash off, it will not leave a trace. The mirror cabinet on the top can effectively increase the storage capacity.
In order to leave the central aisle, move the sink outside. Arranging the shower area and the toilet back to back not only effectively shortens the length of the water pipe, but also makes the design more concise.
In a typical T-shaped layout, the shower area and toilet are hidden behind the washbasin to maintain privacy. The wash area divides the bathroom into two parts.
The entrance of the bathroom is designed with arches, and the retro red bricks are more antique. The tiled floor extends to the left and right.
After reading the above cases, do you think it is good-looking and practical?
Thanks for viewing our website. Hopefully you can find your interested items. Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business. We are one-stop supplier of bathroom and kitchen products.
Don't think that after the new house is renovated, it will be as pleasing as the propaganda album. After the new house is renovated, a large amount of decoration waste will be generated. Dust, stains and marks from the decoration will be left on the walls and glass. Just like a baby who was just born, she will have a cute appearance after washing and putting on clean clothes.
Cleaning the newly renovated new home is an important task after decorating the new home. It is also the most laborious task. Facing a messy and unstructured new home, you don’t know where to start. Summarize the first cleaning experience after the renovation. We hope it will be of reference significance to you.
01 Cleaning Service
Those who are clueless about the cleaning of a new house can choose the cleaning service of a housekeeping company. Housekeeping companies have their own routines and tools for cleaning work. It is also a way to hand over professional cleaning work to them. The premise is to choose a qualified and high-quality housekeeping company. Services include: house dust removal, cleaning up decoration garbage, wiping glass, cleaning the floor, decontamination and disinfection of kitchen and toilet, cleaning up decoration traces, etc.
Notes on cleaning service
1. Organize a list of cleaning precautions, and list some areas that need special cleaning to avoid omissions. The decoration materials of each family are different. It is necessary to tell them some precautions, such as which places and areas cannot use water or chemical cleaners. These need to be communicated clearly with the housekeeping company before starting work.
2. Clearly state the materials of walls, floors, furniture, etc. that need to be cleaned, and let the staff prepare appropriate cleaning tools.
3. Communicate clearly about the tools needed for cleaning, which are brought by the staff and which are prepared by us.
4. Communicate clearly on the disposal method of the cleaned up waste, whether to throw it away or keep it somewhere.
5. Supervision, including whether to do a good job in dust prevention and cleaning of dead ends.
02 Clean Up by Yourself
Some people are unwilling to hand over their new homes to strangers to clean up, so they do their own cleaning work. Cleaning in person is nothing more than two things: preparing tools and clarifying the order of cleaning.
Preparation of Tools:
1. These will be used to clean the wall.
Small brush, sandpaper (to polish the paint on the wall), shovel, glass spatula, wet paper towel (to wipe the wallpaper), ladder.
2. These will be used to clean the ground.
Vacuum cleaner, mop, broom, nano sponge, rag (use a discarded old bed sheet; the size can be cut at will. It is big enough), dust cover, garbage bag.
3. Protective Equipment
Shoe covers, gloves, aprons, masks.
4. Cleaning Utensils
Detergents, maintenance agents, disinfectants, glue removers.
Cleaning follows the order from top to bottom and from the inside to the outside.
Start cleaning from the room first, and then go to the kitchen and living room. The bathroom can be placed last, because the bathroom is a place where water is used repeatedly during the cleaning process.
Like kitchens and bathrooms, where there are wall tiles, they need to be cleaned from top to bottom to clean up the gaps in the tiles and the paint spots and glue stains on the surface.
03 Cleaning Techniques
During the decoration process, many traces of material adhesion will be left, and some cleaning skills are required.
Tape print: Use a damp cloth to wet it for a while before wiping.
Paint traces: Use paint remover or turpentine.
Marker marks: Wipe with a rag or damp paper towel with some alcohol.
Tile stains: Use special detergent for tiles to clean, paint and drawing pen fluid can be cleaned with turpentine, pyruvic acid or alkali.
Cement on glass: If it is a small cement stain, wipe it with a damp cloth and then scrape it off with a spatula. If it is a stubborn and large cement block, you can use the toilet cleaner to remove it. The effect is very good.
Tips: The toilet cleaner is acidic. Wear gloves when using it and don't think that the toilet cleaner is effective in removing cement and use it on tiles and marble floors. In addition, do not use alkaline soap at the same time when removing the cement on the glass.
04 Cleaning Can Be Done Separately.
In fact, if the new house cleaning work is done step by step during the renovation process, the subsequent cleaning will not be so laborious. Separate the cleaning work to these renovation steps:
1. After the water supply line and electricity are completed, and the walls and ground are leveled, the whole house can be cleaned and clean up the discarded decoration garbage.
2. When laying tiles, remind the workers to wipe off the cement stains on the surface of the tiles after laying the tiles.
3. After painting the wall and floor, you can clean it again.
If you have other new house cleaning experience, please leave a message to share with us.
If not to consider the faucet valve core and aerator, lead-free brass faucet and general faucet mainly differ in the material and technology.
Ⅰ. Raw Materials
The main raw material of lead-free brass faucet is made of international standard H59 and H62 copper. The casting adopts steel mold for gravity casting with uniform faucet wall thickness of 2.2-3.0 mm.
The main reason for using brass is the antibacterial activity. This can prevent bacteria from growing on the inner wall of the faucet, which is an advantage that other materials (such as stainless steel and plastic) do not have.
Ⅱ. Surface Technology
Surface treatment is very important for lead-free faucet, which is related to the service life, finish and wear resistance of the faucet. High quality faucet surface electroplating is usually mirror effect. It can eliminate secondary water pollution and ensure water safety.
How to judge the quality of the surface treatment of a faucet?
It can be easily judged by the following 3 points:
1. A good faucet will have a moisturizing and shiny surface, while a poor quality will have a dim gloss;
2. A good faucet will have a flat surface, while a poor quality faucet will have a wave surface, even a dent.
3. Good faucets are more wear-resistant, and there are no scratches, but inferior products will have dense scratches on the surface.
Generally, the surface coating of high-quality brass faucet has only 2 layers, and the product can pass 48 hours neutral and 24 hours acid salt spray test.
Ⅲ. Production Process
The production process of faucet is generally the following 16 steps:
copper ingot - dissolution - casting - cleaning after casting - casting inspection - machining - tolerance inspection - grinding - surface inspection - electroplating - electroplating inspection - assembly - pressure test - finished product inspection - packaging - delivery.
Each process has strict requirements for the production process.
The difference of faucet material selection and production technology determines that the price of lead-free brass faucet is generally higher than stainless steel and plastic faucets.
When decorating kitchens and bathrooms, many people worry about whether to choose an above counter sink or an under counter sink. The above counter sink and the under counter sink have their own advantages and disadvantages. Which one to choose depends on your own preferences.
There is a difference between the definition of the above counter sink and the under counter sink in the kitchen and bathroom, we will analyze them separately.
Above Counter Sink:
Above counter sink installation is the most common and simplest. The opening size of the countertop is slightly smaller than the size of the sink, so that the sink can be placed on the countertop, and then a circle of glass glue can be applied around it.
The above counter sink is easy to install, and there is no need to worry about deguming if the load is too heavy. It is also convenient to change the sink later, just scrape off the glass glue and replace the sink. The space left under the sink can be about 3 cm higher than the under counter sink.
It is inconvenient to clean the countertop in future use. The sides of the sink and the countertop are sealed with glass glue. After a long time, the glass glue is easy to mold and turn black.
Under Counter Sink:
There are also two ways to install the under counter sink. One is to make a hole on the counter slightly smaller than the outer edge of the sink. The other is to cut a hole according to the inner edge of the sink.
The under-counter sink is very easy to take care of, and the countertop is easy to clean. It is integrated with the countertop and more concise.
Relatively speaking, the installation of the under-counter sink is more troublesome. The gap between the countertop and the sink is bonded with a strong adhesive. If you want to replace the sink, you may need to replace the countertop as well. In addition, no matter how strong the glue is, and the load-bearing capacity is uncertain, there is a risk of falling from the counter. General washing and load-bearing of pots and pans will not cause problems.
Above Counter Basin
The basin above the countertop is called the above counter basin. The installation of the above counter basin is relatively simple, just cut a hole on the countertop according to the installation drawing. Then place the basin in the hole and fill the gap with glass glue.
Above counter basins are more beautiful in shape and have a wide variety of types. You can choose according to your favorite style. Easy to install and remove. If you want to replace it with a new basin, you can directly remove it and install a new one.
One is that it is troublesome to clean the countertop, and there is a hygienic corner between the basin and the wall. The second is that the glass glue is used to bond the basin and the countertop, and the glass glue is easy to turn black or mildew after a long time.
Under Counter Basin
The biggest advantage is that it is easy to clean, and there will be no hygienic dead angle. The basin area is more clean and tidy.
Similar to the kitchen sink, it is still a problem of installation and replacement. And the style of the under-counter basin is fixed, so it is impossible to make more choices in the shape.
In summary, the above counter basin and the under counter basin have their own advantages and disadvantages. Simply put, people who want to clean more easily can choose under counter basins in both the kitchen and the bathroom. For the convenience of installation and replacement, or for those who have styling requirements for the bathroom, an above counter basin can be selected.
As housing prices continue to rise, the pressure on young people to buy apartments is increasing. In order to be able to buy a new apartment as soon as possible, small-sized housing has become the choice of more young people. In this way, you can own a home of your own without too much financial pressure. Of course, homes can be small, but life must be exquisite. If you want a quality of life and a more comfortable living, you must spend more time and energy on decoration.
Choose a suitable decoration style, choose furniture with a variety of storage functions, make an overall plan for the space, and maximize the use of space. Small apartment houses can also enjoy exquisite and beautiful life! So when we are decorating, how do we make small-sized houses decorated both exquisitely and practically?
01 Principles of small apartment space planning
Although the space is small, the planning can not be less. When planning and designing, first of all we must plan and layout the space in a unified way. According to the family's living needs, different regional functions are clearly planned to meet the needs and quality of the whole family's life. Second, improve space efficiency. The overall layout of the room area should be reasonable. Try to reduce the aisle area and some shared area. For example, some non-load-bearing walls can be knocked down and replaced by glass walls. After meeting the basic functional needs of the family, the principles of economical and practical space decoration should be clarified. Avoid excessive decoration of the space, which not only reduces economic consumption, but also makes the sense of space larger, and also avoids air pollution caused by excessive decoration, which affects health. Finally, because our house is a small apartment, we should make full use of each space, not let go of any corner, and strive to maximize the actual use of space. We can not only make reasonable configuration in terms of plane layout, but also make full use of the facade space. In a limited space, create unlimited possibilities!
02 Five choices to maximize the space of a small apartment
In the specific decoration process of small apartments, first, it is recommended that the main color of the decoration can be white. White can make small apartments simple and generous. Because white visually makes the space more spacious, it also makes the space brighter. Second, if the height of the small apartment is not high enough, you can make good use of the ceiling. The color of the ceiling can be lighter than other walls. The color gap can obviously increase the height of the room and make the space feel larger. Third, to make the sense of space bigger, we must plan every piece of furniture in the room. Let them perform their duties and put them in the right place! And try to choose furniture with storage function, so that each space has a strong storage capacity. Avoid clutter in the room and free up more space for use. Fourth, for small apartments, the mirror is a perfect artifact. Use a mirror to extend your small apartment. For example, a mirror can be installed in the living room, ceiling, porch, and bathroom. The mirror is very practical and has the effect of expanding the vision. The reflected light source of the mirror can also make the room's daylighting stronger and the entire space more clear. Fifth, although the space of small-sized housing is relatively small, there are not few things that should be included in daily life. Therefore, the most important thing for a small apartment is to have a powerful storage function.
03 Tips for storage in different spaces
The storage in the kitchen is cabinets, wall cabinets and workstation, but the workstation in the small apartment kitchens are usually relatively small and can't hold too many things. If you put too many things, you may not have a place to cut vegetables during normal cooking. At this time, you can stick hooks, racks, etc. on the wall to place some items. In the living room, most young people now know that they can use the sofa background wall and the TV background wall for storage. It can not only save space, organize storage items, but also decorate the living room. In fact, the sofa is also a good storage point. Choose a sofa with a drawer cabinet. Although there is not much storage space, you can also put some relatively mini items, such as nail clippers, mobile phone holders, and game workstation. The bedroom is the most storage place for small apartment houses. Choosing a large wardrobe can meet most of the storage needs. Coupled with the combination of the bedside background wall cabinet and the bed bottom cabinet, basically everything can be stored. The bedroom is messy and the scene of clothes everywhere will never appear again. Of course, there is also the bathroom, which is the most frequently used place in daily life, but the space is small, and there are many and miscellaneous things. It is a headache to organize and organize. Therefore, in the early stage of the decoration, the bathroom space must be stored well.
04 Super bathroom storage rules
A small bathroom will need at least a washing area, a shower area, and sometimes even a laundry area, bathing area. The more functions, the more debris. All kinds of toiletries, skin care products, cosmetics, cleaning supplies, basins, dirty clothes, etc. must be piled up in the bathroom. There are always problems in life, but life will also give us some solutions. At this time, we can choose some suitable bathroom products, and then match some small storage pieces. Develop every corner of the bathroom, expand the space, and make the bathroom grow from small to large, clean and tidy!
Aquacubic Has Rich Experience and Passion in Bath and Kitchen Industry. We can provide total solution for apartment projects.
As a manufacturer of sanitary products for more than 11 years, we have seen many customers whose bathrooms are really full of functions. Although it is small, the functions are still very diverse. Have to admire!
Modern decoration requires both practical functions and individual style, so the budget is often difficult to control. The bathroom space usage rate is high. If you can save it everywhere, rework and repair will occur, and the gains will outweigh the losses. At the same time, the cost of furniture and decoration can also be spent more or less. The following are some small details on the bathroom decoration, which can save costs time and time again!
1) Waterproofing is essential for walls.
Waterproofing in the bathroom is very important, not only to choose high-quality materials, but also to ensure professional painting. The wall waterproof in the wet area should be at least 180cm above the ground and 50cm for other places. The ground waterproofing generally needs to be brushed twice and a 24-hour closed water test should be carried out. Wall corners, water pipes, etc. should also be carefully done.
Ceramic tiles are the highlight of bathroom decoration. And the wall area is large. You can choose relatively economical tiles to ensure the waterproof performance. You can also directly paint with waterproof paint where it is not in the shower area. It will reduce cost.
Mosaics with rich patterns can enhance the visual aesthetics of the space. And to reduce material costs and manual laying costs, mosaics can be laid only on key positions. Tiles, waist line and top line can be selected according to your own needs to control the cost of decoration.
The original light-body wall is removed and replaced with a transparent glass wall, which expands the visual area of the space and also saves costs.
Mosaic paving requires a high labor cost, so you can find a large mosaic-like wall tile to pave the wall, which can save a lot of money. Since there are fewer gaps between large-size mosaic tiles, the amount of caulking agent is correspondingly reduced, which is often used for reference and selection in home decoration.
2) The floor area should be beautiful and non-slip.
Safety should be placed in the most important position, and slip resistance should be considered in the selection of floor tiles. At the same time, the human body will directly touch the ground, so the quality of materials should be paid attention to. Bright floor tiles are relatively slippery, so use them as little as possible in the bathroom, and use matte floor tiles or tiles with good anti-slip properties.
When paving the floor tiles, the slope must be appropriate, and the floor drain must be the lowest point so that the water can flow smoothly. The floor tiles should be made of whole tiles as much as possible, and the gap between the tiles should be controlled at about 2mm.
The area of decorative tiles on the ground is smaller than that of the wall. The use of interval paving can save the budget, and only use the same pattern of tiles to be separated by more than one tile.
If you want to create a low-cost bathroom with a natural texture, you can use wood-grain tiles instead of waterproof solid wood, which also has the characteristics of natural patterns, elegant colors, and easier matching with other sanitary wares.
Paving decal tiles in the bathroom can improve the monotonous bathroom style. In the actual construction process, the cost of laying decal tiles is much cheaper than mosaic.
When special-shaped handmade tiles are laid on the ground, they should be from the inside out, the gap between the tiles should be controlled within 8mm, and the height of the caulking agent should be level with the tiles. The paving of this kind of tiles should be carried out in sequence according to the serial number on the back to avoid waste caused by rework.
3) Cleverly arrange the exposed and concealed sanitary ware.
The bathroom is a place where multiple channels of water and electricity converge. In the early stage of renovation, it is necessary to choose quality water pipes, wires, etc. And the wiring must comply with the regulations to avoid water leakage due to design and material selection problems.
As the space expands and functions increase, there are more and more electrical appliances in the bathroom. If you want to install smart toilet lids, integral shower rooms, massage bathtubs, multi-functional bathroom cabinets, etc., you must first make the sockets during the decoration to avoid rewiring in the future and increase the trouble.
The plumbing renovation of the bathroom is most laborious. If you want to save this part of the cost, the pipeline must be open-lined, without slotting, and future maintenance can also save a lot of costs.
In addition, avoid excessive wiring when rebuilding waterways and circuits. Use multi-hole sockets as much as possible on the panel of the socket. Under the premise of the same number of wires, you can plug in more electrical appliances. The wiring of the space is reconstructed with open wires, and the wires are routed from the top. The outer wall of the pipe is painted with waterproof paint, which saves a lot of labor costs and is also convenient for maintenance.
The bathrooms are uniformly decorated in black and white tones, simple and generous. The upper and lower water pipes of the sanitary ware are made of metal material, which has a long service life and is not easy to be damaged.
The space matching has been cleverly designed. The cement wall is matched with solid wood floor tiles, which is elegant and warm, satisfying practical functions and beautiful.
4) Shower Area
The quality of the glass used in the shower room is closely related to the safety of the bathroom. Fine tempered glass is generally difficult to break, and it will not hurt people when broken. Therefore, when choosing, don't be greedy for temporary cheapness, and try to choose high-quality, well-reputed brands.
The frame of the shower room is usually made of aluminum alloy, and the surface is sprayed with plastic, so it is not corroded or rusty. The thickness of the main frame aluminum alloy is preferably 1.1mm or more, which is not easy to deform.
In addition to professional brand shower rooms, the shower area can also be separated from dry and wet areas with various partitions. Common glass partitions only need to be installed on one side when combined with the wall, which saves costs by using less materials.
At the same time, the installation of the shower room can be omitted. The base of the shower room mainly plays the role of heat preservation and drainage, and the material is mostly acrylic.
The shower area is separated by a glass wall, and the ground is transitioned by steps to create a semi-enclosed shower space. The glass partition is directly fixed with hardware without reaching the top, which gives the space better permeability.
A wall serves as a partition, separating the wash area from the shower area. The interior of the wash area is covered with ceramic tiles, the exterior is painted with waterproof paint, and the key parts are strengthened.
5) Wash Area
The floor drain is most commonly used for sink, and the wall mount type can be used for more advanced spaces. It is best to have all S-bends to prevent upward odor. Basins are divided into above-counter basins, under-counter basins and wall-mounted basins. Above counter basins for households are more suitable and easy to install. The under counter basin is suitable for a large area bathroom, and the installation is relatively complicated.
Small-space or low-budget families can abandon the overall bathroom cabinet, and use a transparent iron frame to save space and leave more space for the legs. Mirror cabinets and recessed cabinets are more suitable for small spaces and complete the storage function of the bathroom. To reduce the cost of decoration, you can choose a single color and simple style in the decoration, and match it with retro copper-colored, metal-colored faucets or mirror lights to create highlights.
Build the washstand with cement, and place storage baskets underneath. The wall-mounted faucet is highly decorative, but the size must be measured accurately in advance, otherwise it cannot be installed, which will affect the use.
There is no special furniture under the basin; only metal racks are used to save costs and place toiletries.
Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We have rich experience and passion in bath and kitchen industry and appreciate your contacting and business. Look forward to cooperating with you. Thanks a lot!
Sanitary ware is a must-have for household life. With the improvement of people's living standards, the market has been expanding. And after years of development, China's sanitary ware output has become the world's largest.
Competition in the low-end market is fierce. And difficult to enter the high-end market.
In recent years, China's sanitary ware market has been in a state of rapid development.
However, most sanitary ware companies have not been able to keep up with the pace of development, and management and marketing have not been standardized. The quality of employees is not high. Only a few companies have operated some well-known brands and opened up channels. This leads to vicious competition between enterprises and the market is occupied by a very small number of large and well-known enterprises.
The disadvantages of small sanitary ware companies are even more obvious: small scale, single product, outdated equipment... seriously lacking in competitiveness.
And several large foreign brands not only control the high-end market, but also become more and more competitive in price. They are gradually penetrating into the low-end market, which is an unprecedented test for small and medium sanitary ware companies.
Secondly, various costs such as materials and labor are rising. The rising cost puts more and more pressure on sanitary ware companies. In the face of many competitors, they have to increase advertising investment. By compressing their own profit margins, try to gain customers and open up sales.
For sanitary ware companies, especially small and medium-sized enterprises, it is tantamount to worsening the situation.
Some people say that the Chinese sanitary ware market is "handed over" by the Chinese themselves.
Only by occupying the high-end market, the enterprises can have a position; on the contrary, the smaller the share, the lower the position.
It is understood that China has become the world's largest bathroom consumer market. The performance and quality of many domestic sanitary ware brands have reached or even surpassed that of foreign brands. However, foreign sanitary ware brands have almost monopolized China's high-end sanitary ware market with their strong financial strength and high brand awareness.
In addition to historical reasons, the lack of brand awareness of domestic companies is an important reason for this situation.
Sanitary ware has been continuously developed and improved. More and more consumers not only pay attention to product price, quality, and after-sales service when buying sanitary products, but also pay attention to brand awareness and business reputation.
If the company still stays in the business philosophy of the seller's market in the past, it will definitely be at a disadvantage in market competition, and even be ruthlessly eliminated by the market. The sanitary ware industry has entered the era of brand marketing.
Liberate the shackles and keep up with the times
According to statistics, China's annual demand for ceramic sanitary products has reached 34 million pieces. It has become the world's largest consumer market for sanitary products. Last year, the output of ceramic tiles and sanitary ware products reached 7.5 billion square meters and 177 million pieces respectively. They account for 60% and more than 40% of the world's total output of architectural sanitary ceramics. The annual growth rate of products exported to Europe, the United States, Japan, South Korea, the Middle East and other places is 50%.
From the analysis of this trend, the Chinese sanitary ware market is quite optimistic. With a large amount of rigid demand, it can be said that the market is very good.
However, due to the comprehensive factors such as rising raw material prices, rising labor costs, and continuous floods and droughts this year, the domestic ceramic industry is in a downturn.
In response to the frequent occurrence of "overcapacity" and "market saturation" in the industry, the profit margins of small and medium-sized bathroom companies will be further compressed. More and more rational consumers do not intend to pay for it. The pressure of product backlog is considerable, and some Chinese factories have to stop running some production lines.
The ceramic sanitary ware industry is still very traditional in terms of management and marketing. Employees lack technical expertise. Therefore, only a very small number of companies have relatively well-known brands and relatively complete sales channels.
Many companies' own sales channels and sales management are obviously not standardized enough, and marketing is weak. The sales of products depend on a good relationship with distributors.
In addition, many companies do not have the ability to operate brands, a systematic business model and a professional marketing team; no accurate market information; no customer-oriented service standards and customer-oriented service system; no market-oriented research and development, production, and supply system. The capital investment cycle is long and the risk is high. All of these will become a time bomb that puts enterprises at high risk, and may be deadly at any time.
In summary, it is not difficult to see that an enterprise's internal operation management system urgently needs to be established, and market standards urgently need to be standardized. In addition, companies can stop running part of the production line, digest inventory, and wait for the peak sales season. Because there is real rigid demand, as long as the product is done well, no matter how the market environment changes, a certain effect will eventually be achieved.
The following are three suggestions for improving the status.
Keep Up with Quality
At any time, the quality is everything and will not lag behind. Consumers who spend money on goods, especially a household product, will certainly not tolerate quality problems. Update production equipment and other infrastructure. Although the cost is high, if you don't invest, it's just waiting to die.
Sales Channel Expansion
In the past, the marketing of sanitary ware companies relied on good customer relationships to a large extent. Lacking the ability to operate the brand; there is no standard customer service system and professional marketing team. These all increase the profit risk of sanitary ware companies invisibly. This is also an important reason why many sanitary ware companies say that "the product is good, but it can't be sold."
Keep Up with Service
Compared with methods such as updating equipment and adding stores, the investment in service quality improvement is much lower than the previous two. Moreover, there are more and more high-quality sanitary products in China. Whether to develop high-quality, considerate and personalized services to bring customers a better service experience has become most important for the product to stand out.
The common faucet materials on the market today are: stainless steel, plastic, brass, zinc alloy faucet, etc.
Brass is the most common material for faucet manufacturing. It is made of international standard H59/H62 copper. The casting adopts steel mold for gravity casting, and its wall thickness is uniform, generally 2.5-3.0 mm. The faucet made of brass is characterized by: no rust, durability, anti-oxidation, and sterilization effect on water.
The density of zinc alloy is lower than that of copper, and the handle is lighter. The surface of zinc alloy is easy to oxidize from the inner wall, and white oxide powder will appear on the surface. The strength is much worse than that of copper. The service life is not long, and the lead content is high. After one to two years, the faucet made of zinc alloy will oxidize and rot.
Plastic faucet has the characteristics of corrosion resistance, aging resistance, no rust, lead-free, non-toxic, odorless, high pressure resistance, light weight, easy construction, and low price. Plastic is not wear resistant.
Now health and environmental protection has gradually become the new themes of modern life. Stainless steel is an internationally recognized healthy material that can be implanted into the human body. Therefore, kitchen and bathroom products with stainless steel as the main material have begun to become popular in European and American countries.
More than 90% of high-end faucets are made of brass. Brass is the most suitable faucet material and has antibacterial effect. Among them, H59 copper is most used. Its lead content is qualified. H62 copper’s lead content is less and more corrosion-resistant. Although stainless steel can be lead-free, but the quality is worse than copper due to the complex process and no antibacterial performance.
2. Faucet Manufacturing Process:
Most of the faucets on the market under $20 are made of sand mold casting, which is commonly referred to as "sand foundry". The internal structure of the valve body metal is loose, and it is easy to form interior defects such as stomata. It may not be found in appearance. However, after a period of use, defects such as water leakage, inadequate sealing and even more severe defects will occur. High-grade faucets usually adopt gravity casting, and the internal structure of the valve body metal is dense. For the same valve body, the weight of the products produced by the two processes is different, and the consumption of materials is also different. The weight difference between gravity casting valve body and sand casting valve body is about 1/4. Therefore, the same product has different prices.
The faucet is turned on and off every day. The cartridge determines the service life of the faucet. At present, ceramic is the most suitable material for home use. The high-end faucet cartridge mostly uses ceramic, which is durable and can be opened and closed for 500000 times without leakage.
4. Water Hose:
The water inlet hose of the high-end faucet adopts pure 304 stainless steel. 304 stainless steel can bear high water pressure and ensure water purity.
The aerator of high-end faucet can give users a very comfortable bathing feel. The use of these accessories and materials can ensure the quality of the product. And whether or not to use the NEOPERL aerator is an important factor in judging the quality of the faucet.
6. Surface Technology:
The electroplated surface of high-priced faucets usually has a mirror-like feel. When you press it with your finger, the traces of hand prints will disappear immediately. Moreover, advanced environmental protection electroplating technology can prevent secondary pollution of products and ensure the purity of water.
7. Service Life:
The quality of high-end faucets is still good after 5 years of use, and meet all the national water-saving requirements. The durability, water-saving and environmental protection are its highlight value. Cheap faucets have a very short service life. After two or three months of use, quality issue may occur. And their safety is low.
8. After-sale Warranty:
High-end faucets are produced by professional manufacturers with a comprehensive after-sales service system. No matter the product has an accident or failure, the manufacturer or distributor will be responsible for solving it at any time. The manufacturers that provides higher price products are mostly more qualified, and they are very concerned about sales and reputation generated by each product.
All Aquacubic products that are finished in the production department have to pass their inspection first. There will also be the special inspection personnel to conduct an additional inspection to ensure that every product delivered to consumers is qualified.