Sanitary Centerset Faucet- Manufacturers Factory Suppliers From China

Some faucets are used two or three years, and the water flow is intermittent or rusted into green. The handle is hard to be used for opening and closing. The size of the water flow depends on luck.

Some faucets have been used for 20 years, and the surface is still as smooth as new. The feel when adjusting the angle of the handle is still as silky as the chopsticks in a honey jar. The speed of the water flow are still adjusted as you like. So how can we pick a faucet that can last 20 or 30 years or more?

First, the kitchen faucet can be rotated 360°.

For ease of use, the kitchen faucet should be taller, and the spout should also be very long. It is best to extend above the drain and not splash water. If there is a hot water line in the kitchen, this type of faucet should also contain hot and cold hoses. In order to meet various needs, most of the kitchen faucets can rotate the body of the faucet left and right. The sprayer part of some faucet can be pulled out, which is convenient for cleaning to all corners of the sink.

 

Second, if the budget is enough, the material of stainless steel is preferred.

The material of kitchen faucet is generally brass, which is the most common faucet on the market. However. Due to the characteristics of the kitchen environment, pure brass faucets are not necessarily the best choice. All pure brass faucets have electroplating on the outermost layer, and the function of electroplating is to prevent corrosion and rust of the brass inside. There is a lot of oily smoke in the kitchen, and the greasy hands and cleaners on the hands when washing the dishes make it often necessary to clean the faucet. If you do not use the correct way to clean, it is likely to damage the electroplating layer of the faucet, causing the faucet to be corroded and rusted. If you want to choose an all-brass kitchen faucet, you must be sure to have excellent electroplating, otherwise it will easily cause the faucet to rust and corrode.

And now some manufacturers use high-quality 304 stainless steel to make faucets. Compared with pure brass faucets, faucets made of high-quality stainless steel are free of lead, acid, alkali, corrosion, and harmful substances, and will not pollute tap water. This is very important for drinking water in the kitchen; and the stainless steel faucet does not need electroplating, it is extremely difficult to rust, and the hardness and toughness are more than twice higher than that of brass products, so it is very convenient to clean. However, due to the high difficulty of stainless steel processing, the current high-quality stainless steel faucets are usually relatively expensive.

 

Third, pay attention to whether the length of the tap can clean the sinks on both sides.

When buying, pay attention to the length of the basin and the faucet sprayer. If it is a double sink, pay attention to whether the length of the faucet can clean the sinks on both sides when rotating. Most kitchen faucets can rotate the body of the faucet left and right, which is convenient for cleaning to all corners of the sink.

 

Pull as you like. Return accurately.

When renovating the bathroom, the height of the faucet is a headache: if you buy a low one, you have to bend over when washing your hair or  face; if you buy a high one, It's not convenient for the opening and closing of the mirror cabinet. On the other hand, it will cause water splashing due to the large drop...It is not a problem with the Aquacubic faucet!

 

Aquacubic faucet adopts pull-out design. With 360 degree sprayer head to realize free rotation and pull freely, the water can reach any place where the user needs it, and meet all the needs in the bathroom water process. After use, just let go. The built-in gravity hammer can help the faucet retract easily and quickly. Users can experience the pleasure of face cleaning and hair washing in a new way.

Long lasting new. Easy to clean.

The bathroom is full of moisture. In such an environment, water stains or fingerprints are easily left on the surface of the bathroom faucet. Scales will accumulate on the faucet after drying. They are difficult to clean and even gradually corrode the coating and form rust spots on the surface. To make the bathroom faucet last longer, you need surface treatment technology with easy-to-clean coating.

 

Aquacubic faucet adopts precision electroplating layer and SRS surface treatment technology, and passes 24 hours acid salt spray test. The surface has an elegant metallic luster. They are wear-resistant and corrosion-resistant. Faucet will be bright as new with a light wipe. You don’t have to worry about leaving fingerprints and watermarks when you touch it with wet hands. This reduces cleaning time.

 

The bathroom carries most of the cleaning work of a family. In turn it affects the living experience and life quality of the whole family. If you want to enjoy the exquisite life, you need the Aquacubic faucet that can be pulled freely to bring a fashionable bathroom to you!

Kitchen Design

When designing a functional kitchen, the rule of triangles should be kept in mind. That is, the sink, stove and refrigerator are arranged in a triangle. The L-shaped kitchen fits this triangle shape very well. The L-shaped layout is most suitable for small and medium-sized kitchens. The first-class kitchen is not only about the layout, but also about creating delicious food through the inspiration of the right layout.

1. The blank walls are decorated with a series of wall shelves and hanging rails for kitchen utensils.

 

2. This design allows flower pots to be stored in a space that is not large enough to accommodate a shelf.

 

3. This complete wooden kitchen extends its style beyond the corridor, to the adjacent wall and a room door.

 

4. The length of the double-window countertop looks magnificent, and the intricate patterns on the other wall balance the overall appearance.

 

5. Large potted plants form a natural separation between the kitchen and dining area.

 

6. Use inline mode to make full use of small space.

 

7. The combination of open shelves and multi-colored blocks is an interesting solution.

 

8. Minimalist kitchens can use handleless flat embedded-in-wall furniture.

 

9. Even the few special tiles can bring new colors to the pure white kitchen.

 

10. An open shelf occupies one wall, and a closed cabinet occupies another wall. Keep small spaces ventilated and open, instead of containing too many complex elements.

 

11. Floor tiles help make smaller spaces appear wider.

 

12. Horizontal stripes are another way to expand the space visually.

 

13. This extraordinary kitchen has a series of open and closed designs that can show and hide different appliances.

 

14. Two bar stools turn the end of a cabinet into a breakfast bar.

 

15. Wrap the work counter on the side of the end cabinet to get a stylish and luxurious appearance.

 

16. This L-shaped kitchen layout has corner windows and is dominated by pure yellow color blocks. It overlaps with half of the wall cabinet and finally passes through the window glass in the form of a colored film.

17. Add light wood tones and pleasant prints to the white kitchen to create a Scandinavian-style kitchen.

According to the current fashion trend, the kitchen faucets of major brands are based on the hard strength (cartridge and material), They have also started to work together with their soft power (technical content, appearance design, etc.), so if you want to reach the level of one-step purchase, It is necessary to understand what the modern kitchen faucet looks like with both soft and hard strength. In a word, it can meet the daily practical functions of the kitchen, in line with the modern "everything is intelligent" home trend, but also have a bright appearance design.

1. Single Handle Faucet

The faucet is a hot and cold water mixer. Turn the handle to choose hot or cold water.

2. Double Handle Faucet

Water flow can be controlled separately for cold and hot water.

This is also called an 8 inch model.

3. Widespread Faucet

Two handles and water spout are separate from each other.

4. Touchless Sensor Faucet

No need to touch or turn the lever to make the faucet work.

Faucet can also be in manual or automatic mode.

5. Wall Mount Faucet

Faucet is installed in the wall. More worktop space around the sink with the standing faucet.

6. Bridge Kitchen Faucet

Two handles kitchen faucet with pull down sprayer.

Elegant design and classic style complement any kitchen.

7. Pull Out Kitchen Faucet

The sprayerhead can be pulled straight out. 

Large pots can be easily filled with this function.

8. Pull Down Kitchen Faucet

The sprayerhead is similiar to the pull-out faucet.

With the high arc, it is more suitable for dish cleaning.

9. Beverage Faucet

360 degrees swivel spout: Adjust to any angles with easy access to any areas of the sink. 

Drip-free performance; Lead-free brass body.

10. Faucet with Side Sprayer
The side spray is separate from the faucet itself and is an alternative to the pull-out/pull-down faucets.

This is added to an extra sink hole.

Towel bar: Towel bar is used to hang towels. The installation position is generally a position closer to the bath, and the installation height is generally 1.4 to 1.6 meters from the ground. The installation height should not be too low, otherwise the towel will get wet when bathing. The installation methods of the towel bar can be summarized into two types, one is to install without punching and the other is to install with emptying. Hole-free installation methods generally include vacuum suction cup type and watering type. Screws are generally used for drilling holes. Nowadays, many families prefer the non-punch vacuum suction cup installation, because it is easy to install, fast, and does not require much effort when disassembling. It does not cause any damage to the wall, but after a long time, it is easier to loose and fall off.  The fixing force is not as strong as screwing. The watering type, as the name implies, is fixed on the wall with nail-free glue. It takes more time to install, but the cost savings are better than others.

Towel rack: The towel rack is used to place bath towels. The installation location is next to the towel bar or in an open position in the bathroom. You can design the installation location according to the characteristics of your own bathroom. The length and width of the bath towel are several times that of the towel. The height of the installation is naturally higher than that of the towel bar, but it mainly depends on the average height of the family members.

Toilet paper holder: The toilet paper holder is used to place toilet paper. It is generally installed next to the toilet. The installation position should be lower than the toilet. If it is installed higher than the toilet, you can imagine how inconvenient it is.

Toilet brush holder: The toilet brush is generally installed next to the toilet, and it is recommended not to install it next to the toilet paper holder. The toilet brush usually contains bacteria when cleaning the toilet, and then the air around the toilet brush has many bacteria, and the bacteria are easy to adhere to the paper towel.

Storage basket: The storage basket is generally installed near the shower, and is used to place items such as shower gel and shampoo for easy bathing. The installation height is generally one meter two to one meter four. These are just for reference, and are of no practical use. You can design according to your own habits and believe in yourself.

Clothes hook: The characteristics of stainless steel clothes hooks are reflected in high temperature and low temperature resistance according to physical properties, and corrosion resistance and not easy to rust according to chemical properties. They are expensive and expensive, and are suitable for bathroom use. Space aluminum clothes hooks are characterized by not easy to fade, good environmental performance, not easy to rust, and easy to dye. The clothes hooks made of space aluminum materials on the market are rich in colors, strong in decoration, and low in price. The disadvantage is that the pressure resistance is weak. Not suitable for hanging heavy objects, suitable for various places. The copper clothes hook itself has high material density and good stability, so it is not easy to rust, resists pressure and is heavy, and is more expensive in the market. It is suitable for kitchens, living rooms and other places. Aluminum alloy is made of pure aluminum with some alloying elements, so aluminum alloy hooks are slightly better than space aluminum hooks in terms of performance. Zinc alloy is an alloy formed by adding other elements based on zinc, so zinc alloy clothes hooks are characterized by good manufacturability, long use time and easy cleaning. Wooden clothes hooks have low immunity to humid environments, poor physical properties, but strong decoration, suitable for living rooms, bedrooms, study rooms and other locations. Plastic clothes hooks are easy to mold, so most of the plastic clothes hooks on the market are not only highly decorative but also low-cost. The disadvantage is that the surface is not resistant to dirt and it is inconvenient to clean.

When we buy, we must consider the actual situation at home. Choose the right size and the required rack. Don't buy the package blindly. Some things may not be useful.

The bathroom is full of water vapor after taking a shower? The bath water splashes on the ground? Sometimes you slip and fall accidentally? The bathroom without separation of wet and dry is simply maddening. The separation of wet and dry is an unavoidable matter in the bathroom. As long as we have a slight requirement for the quality of the bathroom, we will immediately take care of this matter. Because the separation of wet and dry in the bathroom is a very cost-effective job, it will make your bathroom life full of happiness in minutes. How to achieve the separation of dry and wet in the bathroom? For small-sized bathrooms, the partitions are too narrow, and they cannot be separated from wet and dry. Very tangled. So how to separate wet and dry in a bathroom of only about 5 square meters? Let's analyze how to separate wet and dry in a small bathroom!

 

Separated by Shower Curtain

The shower curtain is the simplest and most beautiful way to separate wet and dry in the bathroom. It can be said to be a must-have artifact for the bathtub. Use a shower curtain to separate the dry and wet areas of a small apartment, which is the most trouble-free and cost-effective. Whether it is an arc-shaped corner, or directly draw a straight line, make a water retaining strip and hang a shower curtain. It is very convenient. You can also frequently change the style of the shower curtain to a different style. But the disadvantage is that it cannot effectively block water vapor, and it is easy to grow mold and needs to be cleaned frequently.

 

Glass Partition

Compared with the shower curtain which can not effectively isolate the water vapor, the shower door is much more practical. More suitable for bathrooms equipped with showers. The shower door is mostly made of glass. Glass partition is a better choice. On the one hand, because the glass is transparent, it does not appear to be visually narrow. Second, because the glass has better water resistance, the effect of wet and dry partitions will be better.

 

Half Wall Partition

For small apartments, this is also a good choice. Not only can it perfectly achieve the purpose of separating dry and wet, but also use the half  wall to create its own style. Pasting retro-style or modern-style tiles on the wall can play a decorative and beautifying role.

 

The water pipe under the sink does not contact the floor.

In addition to working on the door, you can also separate wet and dry in places such as sinks and basins. The important point is to not to touch the floor! Bathroom furniture that is not exposed to water stains is less likely to be corroded, which increases the service life and is also easy to clean.

 

Move the Sink Out

The most complete wet and dry separation is to move the sink directly outside the door. Use part of the outside space to make the shower area inside the bathroom more spacious. In addition, the external washbasin also allows a family to wash without interfering with each other. The vanity and sink are placed outside the bathroom. Completely cut off the moisture in the bath. Small apartments can also use the walkway outside the bathroom to do so!

 

Do you like the bathroom with separate dry and wet function? The dry area and wet area of the bathroom are perfectly separated, which not only partitions the space, but also is visually more fashionable and rich in spatial level. Wet and dry separation has gradually become mainstream in bathroom design, so hurry up and give it a try!

The kitchen sink is a kitchen ware that every family must have. Because the sink is used most frequently in the kitchen, the kitchen sink must be installed carefully in order to avoid some troubles when using the sink later.

The installation of the kitchen sink is not a major project, but you must pay attention to the details. If you want to rework, it will involve cabinets and countertops, and the workload is huge.

When the kitchen sink is actually installed, although it can be placed in the final process of the kitchen, it needs to be considered when designing the cabinets at the beginning. The cabinet design should leave a space for the sink, at least to ensure that the sink can be installed. Also, when making the countertop, an approximate size of the sink must be provided to facilitate the opening of the countertop. Of course, it is best to have a specific drawing size. Then tell the workers who make the countertops, which way you want to install the sink, above counter, farmhouse, or under counter? Because the hole size of each installation method is a little different.

The following introduces some basic processes and details of the kitchen sink installation, so that you can know what should be paid attention to when checking.

1) When the sink is installed, the faucet and the water pipe are usually installed at the same time. The current faucets are generally hot and cold, so you have to connect the hot and cold water pipes, and don't get confused.

2) After the faucet is installed, connect the drain set. The overflow hole pipe and the downhole pipe are directly connected. If you need to connect the waste water pipe of the dishwasher or water purifier, you can first connect a tee to the drain pipe of the sink. All joints must be kept tightly sealed, otherwise there will be problems such as water leakage and water seepage.

3) If the sink is equipped with an installation buckle, it is necessary to fasten the installation buckle to prevent displacement and unevenness of the sink.

4) After the sink is installed, a leak and drainage test should be done. The method of testing is to fill the sink with water and see if there is any leak in the tank. Because the quality of some sinks is not good enough, there will be blisters, cracks and other reasons on the finished product that cause the sink to leak. If there is no leak, open the drain and let the sink perform a drain test. When draining, pay attention to whether there is water leakage at each interface of the sewer pipe, whether the tank drains smoothly, and whether there are too many residual water marks.

5) After doing a series of tests, if there is no problem, the edges around the sink can be sealed. Applying waterproof glue, and doing some beautification work in the follow-up. Now we have basically completed the entire installation of the sink.

During the entire installation process of the sink, the most important thing is to pay attention to the tightness. Pay attention to the contact position of the sink and the countertop or the junction of the water pipe. So as not to cause water leakage. After the sink is installed, most houses are still in the process of renovation. So keep the sink tidy and clean, and try not to expose it. Too much dust and debris will fall in the sink during decoration. If it is not cleaned up in time for a long time, it may cause problems such as watermarks and rust in the sink.

So after installing the sink, clean the sink, try to wipe off the water stains, and then cover it with a plastic cloth. When you check in later, you can open it and clean it up again. Basically, it can avoid watermarks and rust in the sink after moving in.

Let there be a lot of things outside, leave a corner quietly in the room. 

Under the dim sky, admire the bright moon. 

Talk about the wonderful life with your lover. 

Continue the romantic vow of "hold your hand, grow old with you".

Enjoy every inch comfortable cozy time with your heart.

Shakespeare wrote: "There are a thousand Hamlets in a thousand people's eyes." There are also a thousand homes in a thousand people's eyes. So what are the home design styles that current couples love? How to create a sense of happiness at home in the two-person world?

Choose Home Style:

01 Simple Style 

The world of young people is always simple and beautiful. The simple style is not only the simplification of design elements, but also the serenity, comfort and warmth of a two-person home.

02 Modern Style 

Sweet time is always quiet and happy. The modern style pursues the practicality and flexibility of the space. Through the mutual penetration of functional spaces, and the transparency of simple wide areas, it can give romantic couples more practical applicability.

03 Nordic Style 

The romantic two-person world is always sweet and warm. The Nordic style with logs and white as the main colors, from layout planning to detailed experience, gives people a simple, fresh and natural feeling. It adds points to sweetness.

Use Decoration Skills:

As a two-person home, it is necessary to clarify the living requirements before decoration design. Do a good job of space planning. Increase the functional area as much as possible, and pay attention to the following two decoration tips:

01 Choose Light And Medium Colors To Extend The Space:

Choose bright colors in an exclusive space suitable for two people to live in. The visual sense will be strong. In terms of color, light tones and intermediate colors should be selected as the basic tone of furniture, bedspreads, sofas, and curtains, supplemented by low chroma space. Extend the space to form a warm home atmosphere.

02 Choose A Uniform Material:

The home for two embraces warmness and brightness. The color of the ground can be used in the color system with strong brightness and low purity. Use pebbles to make its own guiding line. In the flowing atmosphere of light and shadow, feel the quiet time between two people.

Create A Home Style That We Love

 

01 Living Room:

As the most functional area in the home, the living room can not only meet guests and friends, hold small family gatherings, but also entertain and relax the body and mind. Before decoration, you can use the open design to expand the space in the living room. If you seldom meet guests at home, you can also change the living room to a study room to create a small and flexible two-person world.

02 Bedroom:

One-third of a person’s life is spent in sleep. The bedroom of two people should be kept in a clean and tidy color, interspersed with delicate small objects. Create a romantic and warm atmosphere, so you can feel the pleasure and relax as soon as you enter the room.

 

03 Kitchen:

Japanese writer Yoshimoto once wrote in "The Kitchen": "In this world, I think my favorite place is the kitchen." The expectation of a better life in the couple's room has been witnessed by the kitchen. Even if the space in the house is small, a small round table can be placed next to the sofa, which is enough to make the most romantic dinner for two people.

 

04 Bathroom:

As a frequently used area in the home, the bathroom is small, but it is a very important part of the decoration. If the decoration design is not in place, it will affect the happiness of family living. Therefore, before the decoration design, while focusing on individualized and practical design, it is also necessary to control all the details of the bathroom to prevent the lovers' daily life from being affected.

Recommend 1: Black Shower Head and Handle Set

A shower helps you wash away the exhaustion caused by a busy day’s work. While getting rid of the fluctuating water flow, enjoy a new comfortable shower experience. Let your body and mind get a great relaxation and rest. The water flow is smooth and not easy to be blocked, bringing a more hearty shower experience. The unique in-wall waterway design, simple silicone surface, and smooth lines make people feel friendly and comfortable, and also increase the overall beauty and sense of space.

Recommendation 2: Bathtub

 

At the end of a day's work, go home and soak in a comfortable hot bath. Lazy, relaxed and at ease. But many can't pick a bathtub, and worry about wasting space and interfering with the normal use of other bathroom functions. Don't panic. Aquacubic can help. A variety of product specifications can meet different needs. The soft arc, elegant design, and unique color matching enhance the fashion sense and decorative effect of the entire bathroom. The pure white color satisfies the sense of cleanliness. Enjoy the clean experience easily. When you take a bath, you can enjoy the moment of immersing your body in warm water, relieve fatigue and decompression, which greatly satisfies the lovers' pursuit of high-quality life.

 

Practical and comfortable household products simplify the steps of life, improve the quality of life, and enhance the sense of happiness in life. Work with Aquacubic to create a sweet and warm home for two people, enjoy the love and care given to each other, and let the love heat up.

KOHLER Drop-In 25-in x 22-in White Single Bowl 4-Hole Cast Iron Workstation Kitchen Sink Shop KOHLER 3 Return To Top Overview Specifications Q

Kitchen Pot Filler Brand: KES Color: Matt Black Dimension: 13.43 x 10.47 x 2.28 inches Weight: 2.4 pounds Warranty: Manufacturers Check on Amazon Pot Filler Faucet Brand: APPASO Color: Oil-Rubbed Bronze Dimension: 16.3 x 10.9 x 2.2 inches Weight: 3.74 pounds Warranty: Manufacturers Check on Amazon Faucet Wall Mount Brand: Havin Color: Matte Black

33” Workstation Drop-In Top Mount Double Bowl 16 Gauge Stainless Steel Kitchen Sink with WorkFlow ? Ledge and Accessories Standard Finishes 95A9032-T33D-SS Only at Online Retailers Marca ? 33” Drop-In Undermount Stainless Steel Single Bowl Kitchen Sink with Accessories Standard Finishes 952138-T33S-SS Only at Online Retailers Rivet ?

ORB folding Walll-Mounted pot filler kitchen faucet Model No. : CF25045 Solid Brass Kitchen Wall Mount Pot Filler Faucet Swivel Spout Chrome Kitchen tap Two 360-degree rotating structures, …

Acqui 1.5 GPM Bridge Kitchen Faucet - Includes Side Spray. Available in 5 finishes.

3 hole bathroom faucet 1-48 of over 3,000 results for "3 hole bathroom faucet" …

Moen 100657 Lever Handle for Single Handle Tub and Shower Faucets, Chrome; Premier 120161LF Sonoma Lead-Free Pull-Out Kitchen Faucet, Brushed Nickel; Kingston Brass …

Tara Ultra. PIVOT Single-lever mixer - Chrome. 33845875-00. Chrome. € Please login to see prices. Please login to see prices. Tara Ultra. POT FILLER Cold-water valve - Chrome. 30805875-00.