Single Bowl Drop-in Kitchen Sink- Suppliers Manufacturers Factory From China

In addition to the practicality of the apartment renovation, we also pay attention to its beauty. For example, choose wall-mounted toilets and washbasins; choose concealed baseboards; hide all the pipes; improve the overall aesthetics!

 

Concealed showers are more beautiful than exposed showers.

 

There are mainly the following 3 ways to install the shower:

1) Exposed installation: the water inlet pipe and mixing valve of the shower are exposed outside, which is not beautiful enough;

2) Concealed pipe installation: The inlet pipe is buried in the wall and the mixing valve is outside. This is most commonly used method;

3) Concealed installation: Completely opposite to the first type, the inlet pipe and the return valve are installed inside the wall. Leaving only the switch and the water outlet outside. Although it is beautiful, the process is complicated.

 

For concealed showers, there are also two different styles:

1) Top sprayer and hand shower

Look at the picture, the top shower head is matched with a hand-held shower head at the bottom. In this way, you need to determine the size of the shower head before renovation. And do the drilling and wiring layout. In terms of installation, this method is relatively simple.

 

2) With additional side spray

This is based on the former, plus a side spray function. During renovation, pre-installed in-wall boxes and multiple valve cores are required to match the water outlet. You can imagine how complicated this approach is! How to install it? Look down.

 

First determine the number of side nozzles (usually 2-6); the in-wall installed valve core has multiple outlet connection ports, from the valve core to the main water inlet, other outlets, top spray showers and hand showers; Secondly, cement leveling is required between the valve core and the wall, and in-wall installed parts are also used to stabilize; then leveling, waterproofing and pressing are performed to see if there is any leakage; the last step is to sticking ceramic tiles.

 

Compared with the exposed installation, the appearance of the concealed shower is certainly more attractive. However, the maintenance is complicated and cannot be ignored. The water pipe fittings of the exposed shower are all on the outside. If the concealed shower needs to be repaired, we can only break the wall! But if you choose a good quality shower, except for the water pipe problem, you don't need to break the wall under normal circumstances.

 

If you really like the appearance, it is not a big problem to choose a concealed shower. But if you are still worried about renovation and later maintenance, it is recommended not to try it.

 

Shower Purchase Skills

1. When choosing a shower, try to make the shower tilted (to see the water effect). If the top spray holes are obviously small or there is no water at all, it shows that the internal design of the shower is very low. It is impossible for the user to have a comfortable experience.

2. Look at the coating and valve core. Under normal circumstances, the brighter and more delicate the surface of the shower, the better the coating process. The high-quality shower uses high-quality ceramic valve core, which has high hardness and wear resistance, and is not easy to drip. The rotating adjustment handle is also very smooth.

3. Everyone knows that if the shower is used for a long time, there will be scale and impurities deposits, which will block the water outlet. If the mesh cover cannot be cleaned, the shower will not discharge water normally; in order to avoid the blockage of the water outlet due to poor water quality. All the shower nozzles should stick out for easy cleaning.

4. Shower accessories will directly affect the comfort of our shower. This cannot be ignored. For example, whether the lifting rod of the shower is flexible. Whether the shower joint is equipped with anti-twist ball bearings. Whether there is a rotation controller on the lifting rod, etc.

5. The water-saving function of the shower is the key point to be considered when purchasing the shower. Some showers use a steel ball valve core, and are equipped with a hot water controller, which can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. This type of shower with a reasonable design saves 50% of water compared to ordinary showers.

Installation Precautions

1. Do a good job of cleaning up during installation, especially the valve core. During the decoration, it is inevitable that decoration dust or even large particles of impurities enter the water supply pipe. If it is not cleaned up, these impurity particles will enter the valve core of the shower faucet, easily causing blockage or even destroying the internal structure of the valve core. If the shower has little water output, it is very likely that the cleaning work is not in place.

 

2. To ensure safety, equipotential terminals are indispensable.

An electric shock prevention system is indispensable in the bathroom: equipotential terminal. After all, compared with other spaces, the bathroom is accompanied by water all the year round, and the risk is relatively high. Connect with the equipotential terminal to prevent leakage, electric shock, and avoid dangerous situations.

 

There are a large number of shower options. So everyone can try to choose different showers. Traditional showers have gradually been eliminated. We must learn to keep up with the trend in renovation project.

Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers. The products include faucets, sinks, basins,

bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.

Look forward to cooperating with you.

Thanks a lot!

After the shower is turned off, the water still runs. Is it a quality problem?

Have you encountered a problem like this? After the shower was turned off, the water still ticked out. Sometimes after turning off for a long time, the water still flows out suddenly, and it flows fast. This is how it happened. Today, let's take a look at "The sudden water flow problem after the shower is turned off".

 

Regarding this problem, at first it was suspected that it was a shower quality problem. In order to clarify it, we also specially checked our showers, but this kind of situation still occurs. Later, we asked a professional to figure out that the water running after the shower was turned off was because of the water stored in the top spray and the shower pipe.

 

Professional explanation: In order to pursue the comfort of showering, the current shower head sprays are very large. The bigger it is, the more water there is after turning off the faucet. After use, the air pressure inside the shower is in equilibrium with the atmospheric pressure, so the water inside will not flow out temporarily. After some time, the water will flow out when the balance is lost. This is a problem with large-top showers. It is not that the shower is leaking or broken, so you can rest assured if you encounter this problem. If it is a constant dripping and leaking, then it is a quality problem.

 

So what should I do if the shower really leaks?

Analyze the factors of the shower leakage first. The main points are as follows:

 

1. The shower nozzle is blocked. If it is used for a long time, the water output will become smaller. If the water quality is not good, the water contains a lot of alkali, and scale deposits on the water outlet cause the shower to be blocked. At this time, it has to be resolved by the seller of the shower. Therefore, it is very important to choose a reliable seller.

 

2. Shower plating. Many people have found that the surface paint on the shower can peel off. It will be ugly after the paint is peeled off. If you have just bought a shower that has this problem, it will affect the appearance. In addition, some poor-quality showers will block because of paint falling off. So we have to take a closer look at the surface of the purchased shower for these problems.

 

When purchasing a shower, you must carefully observe whether the surface of the shower is smooth or not. If it is rough to the touch, it may be processed twice.

 

3. The material of the shower. Some showers are made of plastic or cast iron. The plastic shower head may contain a lot of waste material, and the service life will not be long. Of course, some hand showers that use plexiglass, ABS and other materials are still very good. However, it is not recommended that you choose the shower head made of cast iron, which is easy to rust. Many people who chose this shower are very regretful, because it didn't take long for it to rust. It's ugly, and it also blocked the water outlet and broke the entire shower. At present, the better material is copper. 

 

After knowing the reason, we can come to a solution. There are mainly the following solutions for leakage in the shower:

1. Leakage at the steering ball of the shower head. First unscrew the shower head from the steering ball ring, find the O-ring or similar seal inside and replace it, and then turn the shower head back. Just go to the original position.

 

2. Leakage occurs at the joint of the handheld shower. Select the right size shower hose and shower head according to the specifications, replace its rubber ring, and reinstall it.

 

3. Water leakage caused by gravel or sediment. Unscrew the shower head for cleaning. If necessary, soak the parts with vinegar and scrub the parts. Take care to avoid scratching it. If the shower head is an adjustable spray type, carefully check all movable parts for signs of excessive wear. If the rotating handle cannot move smoothly, the internal cam may be broken, and the entire shower head needs to be replaced.

 

4. The spray mode from the shower head becomes a mixture of spray and rain mode. If the shower is used for a long time, the water output will decrease. It may be because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet cause the shower to be blocked. It is also very simple to solve. For the shower head designed with silica gel particles, just gently knead it. If the scale is serious, you can put white vinegar in a plastic bag, wrap the shower and soak for some time, then rinse with water.

Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers. 

The products include faucets, sinks, basins, bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.

Look forward to cooperating with you.

Thanks a lot!

A comfortable bathroom with separate wet and dry spaces should be 6-10 square meters. However, in expensive cities many families have only 3 square meters to 5 square meters bathroom, which makes it difficult to guarantee the activity space. What do you do if you encounter a small apartment with a bathroom of only 3 square meters?

 

To get rid of congestion and clutter, the bathroom needs to be expanded. Learn to partition properly and use storage wisely, you can easily improve the space utilization rate, and truly achieve "small but complete", and double your use space!

01 How to reasonably partition and layout the three functional areas of washing, showering, and toileting ?

Small and medium-sized bathrooms have a limited area, but they are a multi-functional area that integrates various daily needs such as washing, showering, and toileting. It not only needs to meet the various needs of the owners, but also avoids crowding to the greatest extent. Ensure a warm family atmosphere. Reasonable partitioning and layout according to the size of the bathroom space and the location of the bathroom equipment will help expand the sense of space. Let's first understand the layout of the bathroom.

1. Suite Layout

The layout of the suite is to separate the wash basin and the locker into an "outer room", and the toilet and shower being the "inner room". The advantage of this is that the dry and wet partitions and functional partitions not only reduce the inconvenience caused by humidity but also reduce the mutual interference of users.

2. Open Layout

Many families now have a bathroom in the master bedroom. Many people choose to decorate the bathroom as a semi-open style, which is slightly hidden by partitions such as glass, cloth, and shower screens. It not only effectively cuts off water vapor, but also allows the entire bathroom looks bigger and more transparent.

 

3. "T" Shape Layout 

The so-called "T"-shaped layout is to subtly divide the bathroom into T shape. In the horizontal position of the "T", place the sink, makeup mirror, etc. And on the one side of "T" is the toilet and storage cabinet, and the other side is the shower room or bathtub, so the function allocation in the bathroom is quite clear and easy to use.

02 Small Apartment Decoration Space Expanding

The limited space in the bathroom does not mean that the design will also be limited. Creative use of the existing space and clever use of storage can also create the effect of a large space in a small bathroom.

1. Obstacle avoidance skills in bathroom space.

In the washing area, there are obstacles such as water inlet valve, water pipe pillar, electric heater, etc., which take up space seriously.

In order to achieve the effect of the overall bathroom, many families have to make sure that the water pipes are hidden. By customizing the bathroom cabinet, the wall cabinet can make full use of the wall space and increases the storage space; the floor cabinet can also wrap the obstacles in. On the one hand, the defect is corrected; on the other hand, the entire bathroom space looks more regular and wider.

The bathroom space is small, and it is even more troublesome when encountering irregular apartment layouts. The customized countertop not only makes reasonable use of the position of the wall pillars, but also provides enough storage space.

The washing area is surrounded by walls on three sides, and there are large gaps in the finished cabinets, which are not fully utilized, and there are still dead corners for sanitation.

For a small bathroom, compact layout and small fitting furniture can leave more space. If you want to make reasonable use of the space under the wash area, the sink with multiple drawers is definitely a must for a small bathroom. When the size of the finished cabinet is unreasonable, the space is wasted and difficult to use, the problem can be easily solved by cleverly using some small storage items.

 

2. Longitudinal utilization of the wall to achieve space expansion.

The shower area has a lot of water vapor and not much storage space. However, the wall space should not be underestimated. Use the wall space reasonably to let all the sundries on the wall, so that there is no dead corner for storage. Install baskets and wall cabinets, set the height of the wall storage on a proper height, and place the toiletries so that you don't have to jump out of the shower and endure the cold to take them.

 

3. Make full use of the 1㎡ around the toilet.

The one square meter area around the toilet is easy to be overlooked. A wall cabinet or multi-layer wall cabinet can be installed, and the daily necessities can be classified and placed, which not only improves the space utilization rate, but also facilitates daily access.

 

If you are worried about the growth of bacteria or the invasion of moisture, make the closet a closed type, and hide all the cosmetics and toiletries inside. Once the cabinet door is closed, not only the visual burden is reduced, the whole bathroom also looks neater.

03 Combination of Artistic Aesthetics and Practicality 

If the bathroom in one's home is elegant enough, the taste of other rooms must not be much different. A good life is inseparable from design. Design brings aesthetics of life, and good life aesthetics requires a higher-dimensional understanding. One space, several choices. Simple and capable, warm and comfortable, noble and elegant, a mix of Chinese and Western... These are our imaginations of home, and we can customize bathroom spaces of different styles.

Washing, showering, and toileting are the most basic functional divisions of a bathroom. Bathroom customization makes the function of the bathroom truly "needed by people". For irregular space renovation, it is important to make reasonable use of storage space to improve the basic functions of the bathroom. Take a lot of thought, and use all the design techniques that can save space or enlarge space, and you can realize a fully functional and practical small bathroom.

1. Material:

The common faucet materials on the market today are: stainless steel, plastic, brass, zinc alloy faucet, etc. 

Brass:

Brass is the most common material for faucet manufacturing. It is made of international standard H59/H62 copper. The casting adopts steel mold for gravity casting, and its wall thickness is uniform, generally 2.5-3.0 mm. The faucet made of brass is characterized by: no rust, durability, anti-oxidation, and sterilization effect on water.

Zinc Alloy:

The density of zinc alloy is lower than that of copper, and the handle is lighter. The surface of zinc alloy is easy to oxidize from the inner wall, and white oxide powder will appear on the surface. The strength is much worse than that of copper. The service life is not long, and the lead content is high.  After one to two years, the faucet made of zinc alloy will oxidize and rot.

Plastics:

Plastic faucet has the characteristics of corrosion resistance, aging resistance, no rust, lead-free, non-toxic, odorless, high pressure resistance, light weight, easy construction, and low price. Plastic is not wear resistant.

Stainless Steel:

Now health and environmental protection has gradually become the new themes of modern life. Stainless steel is an internationally recognized healthy material that can be implanted into the human body. Therefore, kitchen and bathroom products with stainless steel as the main material have begun to become popular in European and American countries. 

More than 90% of high-end faucets are made of brass. Brass is the most suitable faucet material and has antibacterial effect. Among them, H59 copper is most used. Its lead content is qualified. H62 copper’s lead content is less and more corrosion-resistant. Although stainless steel can be lead-free, but the quality is worse than copper due to the complex process and no antibacterial performance.

2. Faucet Manufacturing Process:

Most of the faucets on the market under $20 are made of sand mold casting, which is commonly referred to as "sand foundry". The internal structure of the valve body metal is loose, and it is easy to form interior defects such as stomata. It may not be found in appearance. However, after a period of use, defects such as water leakage, inadequate sealing and even more severe defects will occur. High-grade faucets usually adopt gravity casting, and the internal structure of the valve body metal is dense. For the same valve body, the weight of the products produced by the two processes is different, and the consumption of materials is also different. The weight difference between gravity casting valve body and sand casting valve body is about 1/4. Therefore, the same product has different prices.

3. Cartridge:

The faucet is turned on and off every day. The cartridge determines the service life of the faucet. At present, ceramic is the most suitable material for home use. The high-end faucet cartridge mostly uses ceramic, which is durable and can be opened and closed for 500000 times without leakage.

 

4. Water Hose:

The water inlet hose of the high-end faucet adopts pure 304 stainless steel. 304 stainless steel can bear high water pressure and ensure water purity.

 

5. Aerator:

The aerator of high-end faucet can give users a very comfortable bathing feel. The use of these accessories and materials can ensure the quality of the product. And whether or not to use the NEOPERL aerator is an important factor in judging the quality of the faucet.

 

6. Surface Technology:

The electroplated surface of high-priced faucets usually has a mirror-like feel. When you press it with your finger, the traces of hand prints will disappear immediately. Moreover, advanced environmental protection electroplating technology can prevent secondary pollution of products and ensure the purity of water.

 

7. Service Life:

The quality of high-end faucets is still good after 5 years of use, and meet all the national water-saving requirements. The durability, water-saving and environmental protection are its highlight value. Cheap faucets have a very short service life. After two or three months of use, quality issue may occur. And their safety is low.

 

8. After-sale Warranty:

High-end faucets are produced by professional manufacturers with a comprehensive after-sales service system. No matter the product has an accident or failure, the manufacturer or distributor will be responsible for solving it at any time. The manufacturers that provides higher price products are mostly more qualified, and they are very concerned about sales and reputation generated by each product.

All Aquacubic products that are finished in the production department have to pass their inspection first. There will also be the special inspection personnel to conduct an additional inspection to ensure that every product delivered to consumers is qualified. 

When decorating kitchens and bathrooms, many people worry about whether to choose an above counter sink or an under counter sink. The above counter sink and the under counter sink have their own advantages and disadvantages. Which one to choose depends on your own preferences.

There is a difference between the definition of the above counter sink and the under counter sink in the kitchen and bathroom, we will analyze them separately.

 

Kitchen Sinks

Above Counter Sink:

Above counter sink installation is the most common and simplest. The opening size of the countertop is slightly smaller than the size of the sink, so that the sink can be placed on the countertop, and then a circle of glass glue can be applied around it.

 

Advantage

The above counter sink is easy to install, and there is no need to worry about deguming if the load is too heavy. It is also convenient to change the sink later, just scrape off the glass glue and replace the sink. The space left under the sink can be about 3 cm higher than the under counter sink.

Disadvantage

It is inconvenient to clean the countertop in future use. The sides of the sink and the countertop are sealed with glass glue. After a long time, the glass glue is easy to mold and turn black.

Under Counter Sink:

There are also two ways to install the under counter sink. One is to make a hole on the counter slightly smaller than the outer edge of the sink. The other is to cut a hole according to the inner edge of the sink.

 

Advantage

The under-counter sink is very easy to take care of, and the countertop is easy to clean. It is integrated with the countertop and more concise.

 

Disadvantage

Relatively speaking, the installation of the under-counter sink is more troublesome. The gap between the countertop and the sink is bonded with a strong adhesive. If you want to replace the sink, you may need to replace the countertop as well. In addition, no matter how strong the glue is, and the load-bearing capacity is uncertain, there is a risk of falling from the counter. General washing and  load-bearing of pots and pans will not cause problems.

 

Bathroom Basins

 

Above Counter Basin

The basin above the countertop is called the above counter basin. The installation of the above counter basin is relatively simple, just cut a hole on the countertop according to the installation drawing. Then place the basin in the hole and fill the gap with glass glue.

 

Advantage

Above counter basins are more beautiful in shape and have a wide variety of types. You can choose according to your favorite style. Easy to install and remove. If you want to replace it with a new basin, you can directly remove it and install a new one.

 

Disadvantage

One is that it is troublesome to clean the countertop, and there is a hygienic corner between the basin and the wall. The second is that the glass glue is used to bond the basin and the countertop, and the glass glue is easy to turn black or mildew after a long time.

Under Counter Basin

 

Advantage

The biggest advantage is that it is easy to clean, and there will be no hygienic dead angle. The basin area is more clean and tidy.

 

Disadvantage

Similar to the kitchen sink, it is still a problem of installation and replacement. And the style of the under-counter basin is fixed, so it is impossible to make more choices in the shape.

 

In summary, the above counter basin and the under counter basin have their own advantages and disadvantages. Simply put, people who want to clean more easily can choose under counter basins in both the kitchen and the bathroom. For the convenience of installation and replacement, or for those who have styling requirements for the bathroom, an above counter basin can be selected.

 

What kind of faucet is good?

 

Is it expensive? Seriously, price is one aspect of course. We must also consider these:

 

1. Faucet Cartridge

Cartridge is the heart of the faucet. According to the material, there are ceramic cartridges, stainless steel cartridges, and brass cartridges available on the market.

 

After the faucet has been used a long time, there may be a dripping problem. We may think the handle is not closed tightly or the handle is loose. In fact, the problem is often not the handle, but the cartridge hidden inside is beginning to age. The quality of the cartridge is a decisive factor affecting the service life of the faucet.

 

Ceramic cartridge is currently the mainstream cartridge on the market. It is wear-resistant, high-temperature and aging resistant, not easy to rust, good sealing, long service life, and less water pollution. Stainless steel and brass cartridges are also good choices. But bad brass and stainless steel materials are easy to rust, accumulate scale and affect water quality.

The Aquacubic cartridge is of higher quality than ordinary cartridges. It is made of ceramic and is integrally sealed with glue. It can adapt to various environments to ensure that the faucet will never leak under any severe conditions. It is durable, energy-saving and environmentally friendly.

 

 

2. Surface Coating

The surface coating is related to the corrosion resistance of the surface of the faucet.

In this regard, the electroplating corrosion resistance test in China is divided into 1-10 grades, and the tenth grade is the best. Aquacubic faucet can pass 24-hour acid salt spray test. The surface treatment reaches the highest tenth level. The surface should be smooth, and there is no uneven rough feeling. And it is corrosion resistant. 

Of course, if you want a better coating, you can choose anti-fingerprint brushed nickel finish. Through a special process, the surface of the faucet is not easily stained with fingerprint. The best choice for cleaning enthusiasts.

 

 

3. Main Material

The main material is the main part of the water flowing through. 

If the main material is not good, it will affect the quality of the water we drink! Two materials, brass and stainless steel, are more common on the market. It is worth noting that 59 brass is relatively high-quality brass material. Inferior brass may cause water pollution. Aquacubic faucet body uses 59 brass. In order to let customers use healthy water, we use low lead brass to minimize the precipitation of harmful substances in waterways and remove harmful heavy metals. Drink healthily and rest assured.

How to define accessible luxury?

It is not only a design style,

It is a high-style life philosophy.

It is prosperous in a minimalist place,

Elegance is not complicated, simplicity is not simple.

 

Accessible luxury is not simple. It has a variety of manifestations.

Warm, light and luxurious, noble and comfortable

A touch of orange brightens the whole space,

Match with gray tile floor and brown wall,

It highlights the high style of the whole space.

 

Nordic luxury, elegant style.

The main color is gray.

Large light gray marble walls,

Decorate the whole space with a piece of green plants,

With light gray bathroom cabinet,

It's bright and comfortable.

 

Simple, light and luxurious, elegant and advanced

To simplify, black and white color covers the whole space.

Spacious wall space,

Complete set of black bathroom Shower Faucet,

Not only meet the requirements of storage, but also decorate the bathroom.

 

A variety of accessible luxury bathrooms,

With unique charm,

More possibilities for home,

Bring luxury and elegant life enjoyment to the customers.

Whether the owner of a house is willing to clean the room, the point is not how nice the living room is, but how clean the bathroom is. So what should a good-looking bathroom need to be? Let's take a look. The sink over vanity is the most important part of the bathroom. Therefore, a nice sink can add a lot to the beauty of the bathroom.

Water Drainage

There are two types of drainage.

 

Drainage in Wall: no exposed pipes can be seen, more beautiful. 

Drainage in Floor: It can be seen that the pipe is directly connected to the countertop from the floor. There will be more cleaning work.

 

The advantage of the in-wall drainage is that if there is a leak in the drainage pipe upstairs, the neighbors downstairs will not be flooded.

The disadvantage is that once the drainage pipe buried in the wall is blocked, the wall needs to be destroyed, and the pipe may be dredged. But redoing the wall decoration is a new problem.

So you must use good materials when burying it, or you will be tossing yourself. Chinese families basically use the in-floor drainage, so they all need to customize the bulky cabinet to cover it.

 

Wall-mounted Cabinets

Compared with the traditional floor-mounted bathroom cabinets, the wall-mounted cabinets has a better appearance and lightness. Its bottom is suspended, which is very convenient to clean up. And without a hint of bulkiness, it looks very stylish and beautiful.

 

Wall-mounted wash basins generally choose in-wall drainage, and the drain pipe is perfectly hidden in the wall. So drain pipe can not be seen. It will improve overall aesthetics. Therefore, before installing the washbasin, drainage treatment must be done so that it will not cause too much trouble for later maintenance.

 

In addition, the bottom of the washbasin can be selected according to your own preferences, made into an open partition or a closed cabinet, or simply mixed and matched, which can meet the storage needs of towels and some toiletries.

 

Floor-standing Vanity

In modern bathroom design, floor-standing vanities are also welcomed by many young people today. However, its bottom is not completely close to the ground, and it does not look as solid and bulky as it used to be. It is basically designed with a bottom space, and it is supported by thin feet, which is also very convenient to install.

Of course, in addition to the pursuit of beauty, if you do not do a good job in the shower separation, it may cause water stains to penetrate or erode the cabinet legs, which will shorten the service life of the vanity over time.

There is no fixed choice for the drainage method of the floor-standing cabinet.

Even if you hide the sewer pipes in the cabinet in order to save effort, you can still ensure beautiful and practical effects. Make full use of the space. All objects will be placed neatly and uniformly.

 

Basin

I always thought that the washbasin is everything. 

Later, after listening to the professional tasting, I realized how superficial such thoughts are. The washbasin is only a small part.

 

Above counter basin: high-end and high-grade. 

Advantages: safe and convenient, many choices, the most important thing is easy disassembly.

Disadvantages: warping will appear at the connection with the countertop, especially the cheap water basin. And it is prone to leaking water to the sink cabinet. If the installation is not careful, there will be exposed glass glue, which will turn yellow and black after a long time.

 

Under-counter basin: low-key luxury.

Advantages: integrated with the countertop, beautiful and easy to clean.

Disadvantages: The countertop needs to be processed and installed in the workshop. The designer or installation worker who has insufficient experience will cause the water basin to deviate from the middle of the sink cabinet; it is necessary to choose a faucet with a suitable water outlet angle; it is inconvenient to disassemble.

 

Cabinet

By the form of installation, it can be divided into two types. One is a floor-standing and the other is a wall-mounted. Generally, floor-standing cabinets are used in bathrooms with separate shower rooms, and are more compatible with floor drainage. If your bathroom has a larger space, you can choose floor-standing wash cabinets.

 

Wall-mounted wash cabinets have become more popular in recent years. Its biggest advantage is that it is easy to take care of and save space.

 

In short, in this era of pursuing the supreme beauty, even the vanity has become more advanced unknowingly! If you don't want to make your vanity and bathroom sink look so mediocre, you might as well do some bold attempts and use the most popular design to improve the quality of life!

Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business.

We can provide total solution for projects. Look forward to cooperating with you. 

YCCUZA Bathroom Vessel Sink Faucet Swan White with Gold Tall Bathroom Faucet for …

Find basin faucet with free shipping, free return and fast delivery. The surface is made of high quality brass without harmful substance, and can be easily cleaned. Enjoy Free Shipping Worldwide! Limited Time Sale Easy Return.

pvd sink, Tag directory, Exclusive finishes, Exclusive finish, Physical Vapor Deposition, Dispenser Evo satin Copper, Dispenser Evo satin Gold, Dispenser Evo satin Gun Metal, Dispenser Evo polished Gun Metal, The shades of steel, sinks, hobs and mixers in PVD, Foster PVD. UNITED STATES (English) Choose your country.

304 Stainless Steel Single Bowl Kitchen Sink Undermount Brushed Kicthen Wastafel Mangkuk Rumah Wastafel Top Mount Sink Tanpa Keran,Beli dari penjual di Tiongkok dan di seluruh dunia. Nikmati pengiriman gratis, penjualan terbatas, pengembalian mudah ...

16 Gauge Stainless Steel Kitchen Sink: Mounted Type: Undermount: Overflow: Yes: R Corner: R=10/15/19mm: Surface: Brushed: Thickness: 1.0/1.2/1.5mm (Customized) Delivery Time: 30 …

Bath / Shower Curtains and Accessories / Shower Curtain Rods 1 / 12 Black Friday Utopia Alley Rustproof Curved Shower Rod, Aluminum, 45" to 72" Wide (Oil Rubbed Bronze) - Oil Rubbed Bronze Today:

Kitchen faucet with shattaf sprayer commercial wall mount folding Kitchen faucet with shattaf sprayer commercial wall mount folding model:mZUTG17883Our regular price102.22

Bulkbuy Aquacubic Dual Handles Titanium Gold Pot Filler Folding Tap Brass Kitchen Sink Faucet price comparison, get China Aquacubic Dual Handles Titanium Gold Pot Filler …