Cleaning the bathroom is a very important and troublesome task. It is not like the kitchen with obvious large stains and greasy walls, but it is the wettest place in the house. If the cleaning is not in place, it is very easy to breed bacteria. Dust and stains in the bathroom are mostly on various sanitary wares in the space. Although it is not obvious, there are great hidden dangers, such as faucets, toilets, showers, floor drains, shower curtains and so on.
In order to have a clean and hygienic space, this time we will share some simple ways to clean the bathroom. Make your bathroom clean and tidy, and make cleaning fast and easy.
01 Clean the Faucet
Frequent use of the faucet causes water stains to accumulate and looks dirty. What should we do?
You can apply toothpaste to the faucet, wipe it with a damp cloth, and rinse it off.
If you want to restore the faucet to the previous brightness, you can also wipe it with orange peel on the surface of the faucet, and then dry it with a clean soft cloth. This is because orange peel contains fruit acid, which can maintain the surface of stainless steel and make the faucet look new.
02 Cleaning the Mirror
Do bathroom mirrors also need to be washed? If the mirror is used for a long time, it will feel that there is a thin layer of "fog" on it, which causes the mirror surface to be not clear enough. If so, it means it's time to wash your mirror!
To clean the mirror, you can use vinegar, toothbrush, soap:
1. Use a cloth dipped in vinegar to wipe the mirror. The water stains on the mirror are alkaline, which can neutralize the acetic acid in the vinegar, so that the mirror shines as new.
2. Use toothpaste to scrub the mirror, it can also ensure that the mirror is clean and bright
3. Household soap to wipe the mirror surface is also effective in restoring the clarity of the mirror.
Finally, after cleaning the mirror, remember to wipe off the water drops on the mirror surface with a dry cloth or paper towel to prevent water stains from leaving water marks on the mirror surface.
03 Clean the toilet
How can the cleanliness of the bathroom be missing the toilet? Those places that the toilet brush can't reach are the depressing existences. In fact, it is not difficult to solve the dirt on the inner corners of the toilet.
Mix white vinegar and baking soda at a ratio of 1:1 to make a cleanser. Spray it around the toilet and let it stand for 30 minutes. The stains will be washed away, which is more than a toilet cleaner.
Spray it before starting to build the bathroom, and when other hygiene is done, the toilet can be flushed.
04 Cleaning Tiles
The ceramic tiles will become yellow and black due to long-term water stains and bath products impregnation. How can the stains be easily brushed?
Mix vinegar and water in a ratio of 1:1 and spray it on the tiles. Spray more on the moldy areas. When it is air-dried naturally, rinse them with clean water.
05 Clean the Shower
After the shower has been used for a long time, a lot of scale will accumulate on the water outlet. It is not only ugly, but also blocks the water outlet. And it will breed bacteria, so the cleaning of the shower must not be ignored.
The cleaning of the shower head is very simple. Just take a plastic knife, pour some white vinegar (to submerge the shower head), wrap the shower head and fix it with a rubber band. After soaking for 1 hour, turn on the flushing water, and the scale can be cleaned. At the same time, white vinegar also has the effect of disinfection and sterilization, which can kill two birds with one stone.
In addition to stains in the bathroom, there is also an unpleasant odor. The bathroom with a "weird" smell is the most intolerable!
06 Toilet Deodorization
If you want to remove the smell in the bathroom, you can do this!
1. Pour white vinegar into the floor drain, wait for 3-5 minutes, pour the mixed solution of water and baking soda into the floor drain. The soda solution and the white acetic acid alkali will be neutralized. It can quickly eliminate the smell of the floor drain.
2. Slice the fresh lemon and put it in the bathroom to prevent mildew and odor.
3. Put a cup of balsamic vinegar. The smell of the bathroom will disappear. But the balsamic vinegar should be changed regularly, like once a week.
After learning these tricks, clean up your bathroom as soon as possible. The bathroom will feel like a brand new one.
There have always been a lot of worries about the bathroom. Generally, the size of the bathroom in a residence is 5-10 square meters, or even smaller. But to be comprehensive, toilet area, wash area, shower area are indispensable. The bathroom layout, design, and storage are not completely puzzled. Today we will teach you how to lay out the bathroom. Let's take a look at how other people solve such troubles!
For different bathroom spaces, the layout methods are different. Rectangular bathrooms are the most common, because such bathrooms are more convenient to separate dry and wet areas. Generally from the outside to the inside are: wash basin, toilet, shower room. The shower room is generally partitioned by a glass sliding door, which is very convenient to use.
It is difficult to design a square bathroom. Generally, the space is increased by reducing the length of the shower room. In the small square bathroom, the shower room is basically arranged on the opposite corner of the door, and then the wash basin and toilet are arranged in the corners on both sides. If the space is too small, you can only consider removing floor cabinets, bidets, bathtubs, etc.
Plan irregular spaces according to the size.
For irregular shape bathroom, item layout size is the key. According to the slight difference of different corner sizes, different functional areas can be planned, so that all the spaces can be used rationally.
For example, by adjusting the shape of the washstand or shower room, more space can be obtained.
Layout according to dry and wet separation:
The difficulty in planning a small-sized bathroom is the separation of dry and wet. If the wet and dry separation is handled well, the bathroom grade is also improved a lot. The following dry and wet separation methods are more common and reliable. You might as well learn from it.
Shower curtain + bathtub + water retaining strip:
This is the most economical way to separate wet and dry area. Modeling and installation are very simple. But take care to keep it dry after use. Otherwise, it is easy to mold and breed bacteria.
Shower room / retractable shower room:
It has good lighting and flexibility. When it is fixed in a corner, the glass partition can be unfolded, and it can be put away when it is not used, which can save a lot of space.
Glass partition + water retaining strip:
The glass partition material can well maintain the lighting effect of the bathroom and relieve the depressed feeling of the entire space. Generally used with water retaining strips. The elongated bathroom is very suitable. Glass partitions can also be used with low walls to ensure the privacy of the space and bring more light.
Move the sink out:
Move the original washing area directly to the outside of the bathroom. An interior door easily realizes the separation of dry and wet. The shower area and toilet area are reserved inside. It is also very convenient to arrange.
The bathroom storage can be squeezed out.
The location of the bathroom is not large, but if you make clever use of every hidden space, you will be pleasantly surprised to find that the space has become much larger!
Storage behind the door. Install a few bars behind the door to put towels or clothing. A hard wooden board is fixed above the door to store some infrequently used items. Don't let the toilet cosmetics be placed randomly. You can find a tray to store them neatly. The picture on the right is the correct way.
The double-layer shelf can hold more cosmetics.
Fix a magnet bar next to the mirror. Now you can put small hairpins and cosmetic tin boxes there. Never worry about losing your hairpin every day.
All kinds of beautiful jars and glass bottles can show their usefulness. Put in some long cosmetics such as powder brush and mascara. New skill!
Use a clip to hang the toiletries in a position within reach, which is easy to access and use.
Create an open bathtub. Place the toiletries in the bathtub sides and close it when not in use. There is no clue at all.
Place a ladder shelf with storage basket next to the bathtub. All items such as clothes, towels, and washing utensils are collected.
Especially suitable for families with babies. From now on, the toys will not be scattered all over the place.
The bathroom is very important and part of our lives. Let us take it seriously. Love life, start with a perfect bathroom.
We all dream of having a spacious bathroom, preferably a separate bathtub and shower, two sinks, and even a comfortable lounge chair to rest after bathing.
So, today we share with you 10 bathroom design principles. You can use some or all of these techniques to double your bathroom space.
01. Use White Color
One of the easiest ways to make a space look spacious is to use a lot of white: white tiles, white wall paint, white accessories, etc. White allows other colors to recede naturally, making the space look bigger. It can reflect any light instead of absorbing it.
The use of white is particularly effective in the bathroom. Since the bathtub, toilet and sink in the bathroom are basically white, the use of other white can make the space seamlessly connected, making the space transparent and creating a sense of expansion.
Using a lot of white does not mean pale and empty, lack of personality. Using different structural elements, such as light-colored stones or tiles with different textures, and a small amount of metal or wood intervention, can maintain a seamless appearance while also presenting the richness of the space.
02. Use Same Style Color
If you are not a fan of white, you can use warm beige, soft gray or even pink (pink blue, pink, etc.) to create a sense of spaciousness. Choose an elegant ceramic tile, and choose the matching color system for the rest of the wall. The overall effect is quiet and warm, and will not cause visual breaks and reduce your sense of space.
03. Use Floating Design
In a compact bathroom, balancing storage needs and a sense of spaciousness and freedom is a tricky issue. The suspended wash basin design is a good solution. It gives you a lot of space to store essentials. The empty space at the bottom is like an entrance and exit for air flow, which does not make people feel oppressed and tense.
04. Less is More
Less is more. If it is not necessary to have a large storage area, use small-sized wash basins to leave more open areas to make the space look bigger. If there is a bathtub next to the toilet, you need to leave enough space.
05. Use a mirror to enlarge the space.
A large enough mirror can double your space, especially in the bathroom. However, this kind of large mirror must be of good quality, and the size and thickness must be accurate, otherwise it will seriously affect the overall layout. A good mirror will have a very powerful effect, and you can make the room look perfect in just a few minutes.
06. Use Glass Doors
Another good way to expand the space is to use glass as a partition for the door or shower room. The visual extension makes the space look bigger. Especially in the shower.
If you are worried about privacy, you can use frosted or tinted glass, which can still achieve the effect of light transmission and will not make you feel cramped and depressed in the shower. If there is no special need, it is recommended to abandon the bathtub and install a shower room. The bathtub consumes a lot of valuable space, and the usage rate is extremely low.
07. Design a Suitable Alcove
Designing an open alcove in a suitable location can not only increase the storage space, but also increase the visual depth, making the wall look far beyond the real distance.
When designing alcove, you must communicate with professionals, because there will be many wires, pipelines, etc. in the wall of the bathroom.
08. Good Lighting
Good lighting is essential to make any space look bigger and more open, especially in bathrooms that don’t usually have much natural light. In addition, you also need good lighting in the bathroom to effectively perform shaving or makeup, so its importance does not need to be emphasized.
The key is to have a rich lighting scheme in the bathroom, and it is best to use multiple light sources in different locations. Ceiling lights (multiple bulbs can be used), or modern edge-lit mirrors will help you avoid shadows and make the space feel bright and open.
09. Create Long Lines
Whether your bathroom is typically rectangular or oddly shaped, you can always find a wall or area that is slightly longer than other places. Adding a shelf, a tile strip, or even a simple striped wall paint to these areas can help you lengthen the longest line in the room and draw the sight to the farthest position, giving the space a sense of extension.
10. Balance the Horizontal and Vertical Ratio
If your bathroom is already very long, narrow and tunnel-shaped, don't emphasize the length anymore, you must think more about stretching the width visually.
For example, in this long and narrow bathroom below, the tiles on the wall and the floor are laid in a horizontal splicing way, which invisibly increases the visual width, and the spatial balance becomes more harmonious.
Everyone's expectation of the bathroom is nothing but clean, bright, well-ventilated, and no odors. However, in real life, we will find that not all apartment types have such conditions.
For example, in some bathrooms without windows, various problems such as stuffiness, darkness, dampness, and stink are combined. So, since the house-type cannot be changed, is there a better way to save such a bathroom? Today we will share a few tips, maybe you will get some reference from them.
Ventilation of the bathroom is the top priority. If there is no fresh air in, it will not be able to replace the air inside. And it will be easy to breed more bacteria, causing the bathroom to be smelly and damp.
Generally we will install exhaust fans, together with the ventilation pipe to exhaust the air, and then let in the fresh air from outside.
However, the air volume of the exhaust fan is very small and can only achieve partial ventilation. If the air problem in the bathroom is serious, then a better fresh air system should be installed to continuously provide fresh air to achieve real air circulation.
In view of the problem of insufficient lighting in the bathroom, there are actually many small coups. For example: In addition to the main light on the top, you can also add auxiliary lights.
It is a very practical way to use a large mirror + mirror front light to supplement the light source. One can produce uniform light, ensuring that every dark corner can be filled with light. Secondly, it is also helpful to washing and cleaning, to maximize the using of lights.
Moreover, the use of pure white tiles, plus the transparent glass partition, can solve this problem well. Visually improve the lack of light.
When decorating the bathroom, whether it is installing the basic sewer pipe, or the toilet, washbasin or faucet, careful testing and inspection must be carried out to prevent water leakage and trouble to daily use.
In order to prevent water leakage as much as possible, we must conduct the necessary closed water test after coating the waterproof material. In addition, try to buy high-quality floor drains, water pipes and hardware to ensure the comfort and cleanliness of the bathroom.
Of course, if you are diligent in cleaning, wipe off the water and stains on the countertop in time, and then use the heating and ventilation functions of the bath heater to remove moisture. Your home must be clean and refreshing.
Fully enclosed toilets are most likely to cause stinks. If the bathroom at home is comparable to a "public toilet", what kind of experience will it be?
In fact, the problem of deodorization can be basically solved by achieving waterproof and ventilation. But at the beginning of the decoration, one thing that cannot be ignored is the use of U-shaped sewer pipes to form a water seal to eliminate the odor from the source.
In addition, after using the toilet, close the toilet and flush the toilet in time, and clean up the floor drain and debris in time, all of which can play a role in eliminating odors to a certain extent.
05. Dry and Wet Area Separation
Nowadays new houses generally do the necessary dry and wet function separation. Use glass or other partitions to separate the dry area from the wet area, and eliminate a series of hidden dangers during use.
But the old house does not have "dry and wet separation", so it is often separated by a shower curtain. Such an approach is of course better than nothing, but not only can it not effectively isolate water vapor, but it will also easily multiply bacteria. Humidity and odor are inevitable.
If space conditions permit, you might as well install a light tempered glass, or open a small window above the wall. After communicating with neighbors and property, improve the bathroom environment at home.
However, due to issues such as building spacing and bathroom orientation, the actual operation is still relatively difficult.
In fact, no matter how good the original conditions are, and no matter how clean and fresh the bathroom is, if the people who live in it have bad hygiene habits and pile up clothes and sundries in it, the bathroom environment will not be good! If you want to get rid of the distress caused by the bathroom, you must be a diligent cleaning person. With the several solutions provided above, we hope to help you who have windowless bathrooms.
According to the current fashion trend, the kitchen faucets of major brands are based on the hard strength (cartridge and material), They have also started to work together with their soft power (technical content, appearance design, etc.), so if you want to reach the level of one-step purchase, It is necessary to understand what the modern kitchen faucet looks like with both soft and hard strength. In a word, it can meet the daily practical functions of the kitchen, in line with the modern "everything is intelligent" home trend, but also have a bright appearance design.
1. Single Handle Faucet
The faucet is a hot and cold water mixer. Turn the handle to choose hot or cold water.
2. Double Handle Faucet
Water flow can be controlled separately for cold and hot water.
This is also called an 8 inch model.
3. Widespread Faucet
Two handles and water spout are separate from each other.
4. Touchless Sensor Faucet
No need to touch or turn the lever to make the faucet work.
Faucet can also be in manual or automatic mode.
5. Wall Mount Faucet
Faucet is installed in the wall. More worktop space around the sink with the standing faucet.
6. Bridge Kitchen Faucet
Two handles kitchen faucet with pull down sprayer.
Elegant design and classic style complement any kitchen.
7. Pull Out Kitchen Faucet
The sprayerhead can be pulled straight out.
Large pots can be easily filled with this function.
8. Pull Down Kitchen Faucet
The sprayerhead is similiar to the pull-out faucet.
With the high arc, it is more suitable for dish cleaning.
9. Beverage Faucet
360 degrees swivel spout: Adjust to any angles with easy access to any areas of the sink.
Drip-free performance; Lead-free brass body.
10. Faucet with Side Sprayer
The side spray is separate from the faucet itself and is an alternative to the pull-out/pull-down faucets.
This is added to an extra sink hole.
Aquacubic provides "Quality Bath & Kitchen Solution" to our customers.
Quality is always the first priority of Aquacubic. We understand the importance of quality to our clients, and quality is the foundation for long -term cooperation. To deliver high quality products, we established the whole quality system from raw materials checking to mass production audit and final products inspection. Most of our products are CE and CUPC certified.
Cooperating with Aquacubic is cost saving. Aquacubic make great investment in machines to increase production efficiency. Thanks to long existence in the industry and good relationship with material suppliers, Aquacubic has good cost control system and bargain power, to ensure competitive pricing for our customers.
Once you contact with Aquacubic, you will find yourself are in service of a hardworking, reliable, sincere team with good communication skills. Our associates also provide value-added service for design, test report, shipment arranging, freight cost control and so on.
Bathroom faucet brings a modern style to any bathroom setup. Daily washing task is made easier by the classic one-handle lever design of this faucet, which offers effortless control of the steady and clear waterstream. H and C markings help guests easily control water temperature for a better experience.
Nano kitchen sinks will still look brand new even after years of usage. The smooth coating is more resistant to scratches compared to other sink materials present in the market right now. You can also use it to give your pet a lovely bath. No worry about scratch, Your pets will never scratch the tub.
The handmade wokstation stainless steel undermount sink is revolutionary to say the least. With a unique corner design, you get all of the beauty of a designer stainless steel sink while meeting your every day kitchen needs. It is as functional as it is fabulous. It's seriously the best of both worlds. Created with premium stainless steel, this hardworking sink with a ledge features placing various accessories on it for prep cooking easily.
Aquacubic has rich experience and passion in bath and kitchen industry and appreciate for your contacting and business.
In addition to the practicality of the apartment renovation, we also pay attention to its beauty. For example, choose wall-mounted toilets and washbasins; choose concealed baseboards; hide all the pipes; improve the overall aesthetics!
Concealed showers are more beautiful than exposed showers.
There are mainly the following 3 ways to install the shower:
1) Exposed installation: the water inlet pipe and mixing valve of the shower are exposed outside, which is not beautiful enough;
2) Concealed pipe installation: The inlet pipe is buried in the wall and the mixing valve is outside. This is most commonly used method;
3) Concealed installation: Completely opposite to the first type, the inlet pipe and the return valve are installed inside the wall. Leaving only the switch and the water outlet outside. Although it is beautiful, the process is complicated.
For concealed showers, there are also two different styles:
1) Top sprayer and hand shower
Look at the picture, the top shower head is matched with a hand-held shower head at the bottom. In this way, you need to determine the size of the shower head before renovation. And do the drilling and wiring layout. In terms of installation, this method is relatively simple.
2) With additional side spray
This is based on the former, plus a side spray function. During renovation, pre-installed in-wall boxes and multiple valve cores are required to match the water outlet. You can imagine how complicated this approach is! How to install it? Look down.
First determine the number of side nozzles (usually 2-6); the in-wall installed valve core has multiple outlet connection ports, from the valve core to the main water inlet, other outlets, top spray showers and hand showers; Secondly, cement leveling is required between the valve core and the wall, and in-wall installed parts are also used to stabilize; then leveling, waterproofing and pressing are performed to see if there is any leakage; the last step is to sticking ceramic tiles.
Compared with the exposed installation, the appearance of the concealed shower is certainly more attractive. However, the maintenance is complicated and cannot be ignored. The water pipe fittings of the exposed shower are all on the outside. If the concealed shower needs to be repaired, we can only break the wall! But if you choose a good quality shower, except for the water pipe problem, you don't need to break the wall under normal circumstances.
If you really like the appearance, it is not a big problem to choose a concealed shower. But if you are still worried about renovation and later maintenance, it is recommended not to try it.
Shower Purchase Skills
1. When choosing a shower, try to make the shower tilted (to see the water effect). If the top spray holes are obviously small or there is no water at all, it shows that the internal design of the shower is very low. It is impossible for the user to have a comfortable experience.
2. Look at the coating and valve core. Under normal circumstances, the brighter and more delicate the surface of the shower, the better the coating process. The high-quality shower uses high-quality ceramic valve core, which has high hardness and wear resistance, and is not easy to drip. The rotating adjustment handle is also very smooth.
3. Everyone knows that if the shower is used for a long time, there will be scale and impurities deposits, which will block the water outlet. If the mesh cover cannot be cleaned, the shower will not discharge water normally; in order to avoid the blockage of the water outlet due to poor water quality. All the shower nozzles should stick out for easy cleaning.
4. Shower accessories will directly affect the comfort of our shower. This cannot be ignored. For example, whether the lifting rod of the shower is flexible. Whether the shower joint is equipped with anti-twist ball bearings. Whether there is a rotation controller on the lifting rod, etc.
5. The water-saving function of the shower is the key point to be considered when purchasing the shower. Some showers use a steel ball valve core, and are equipped with a hot water controller, which can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. This type of shower with a reasonable design saves 50% of water compared to ordinary showers.
1. Do a good job of cleaning up during installation, especially the valve core. During the decoration, it is inevitable that decoration dust or even large particles of impurities enter the water supply pipe. If it is not cleaned up, these impurity particles will enter the valve core of the shower faucet, easily causing blockage or even destroying the internal structure of the valve core. If the shower has little water output, it is very likely that the cleaning work is not in place.
2. To ensure safety, equipotential terminals are indispensable.
An electric shock prevention system is indispensable in the bathroom: equipotential terminal. After all, compared with other spaces, the bathroom is accompanied by water all the year round, and the risk is relatively high. Connect with the equipotential terminal to prevent leakage, electric shock, and avoid dangerous situations.
There are a large number of shower options. So everyone can try to choose different showers. Traditional showers have gradually been eliminated. We must learn to keep up with the trend in renovation project.
Aquacubic is a professional manufacturer for bath and kitchen products since 2010. We can provide full solution for construction project contractors and wholesalers. The products include faucets, sinks, basins,
bathroom accessories, shower sets, shower rooms, ceramic basins, bathtubs, etc.
Look forward to cooperating with you.
Thanks a lot!
The bathroom area is small, but it needs to be equipped with sinks, cabinets, washing machines, showers and toilets. There is a new way by changing the water route in advance to move the basin outside the bathroom!
Simplify the Bathroom
If you want the washbasin to be outside the bathroom, the most feasible way is to move the door of the bathroom inward to ensure the privacy of the toilet and bathing area.
This approach is actually the traditional "dry-wet separation".
But the difference is that the original washroom door does not need to be installed, and the basin area and the outer area are more integrated.
A sliding door can be installed between the toilet & the shower area and basin, or a specially customized water resistant door. The floor tiles at the basin area can be designed as a unified design with the outside of the bathroom.
The laundry area and the basin are integrated on the outside, because it is not afraid of moisture, the towel basket does not need to be stuffed in the cabinet.
The overall space has not become more crowded by adding walls. Entering the door, the bathtub and shower head are immediately visible and easy to use.
Generally, ultra-thin lightweight partition walls are used, and waterproof coatings are also applied, so there is no need to worry about the partition walls being too thick or not moisture-proof.
Move the basin outside the door
The size and layout of the bathroom are not satisfactory, so let the washbasin truly stand outside the bathroom door!
Where should I install the basin outside the bathroom door?
First of all, it is recommended to be as close as possible to the original sink drain pipe, which is convenient for construction and saves labor and money.
Secondly, consider the habit of daily use of basins. For example, every morning, if you and your family can't wash and go to the toilet at the same time, put the basin near the bedroom.
You can brush your teeth and wash your face when you get up in the morning and go out.
If there is a corridor end or a concave wall near the toilet, it is most suitable to install the sink cabinet.
But it doesn't matter if there is no concave wall, self-built partitions are equally beautiful.
The lockers for bathing products can be placed above the basin together. In this way, the remodeled bathroom will be more refreshing and easy to take care of.
The wash basin can be placed on the balcony.
The wash basin is placed on the balcony because it does not occupy the kitchen and bathroom space, and it is convenient to dry the towels after washing.
Now that the water pipe has been connected to the balcony, you can also plan a good-looking basin. In addition to washing, water for watering flowers and boiling water can be obtained here.
For a family with one bathroom but three generations living together, one more basin can reduce a lot of inconvenience in life.
Make a simple-style balcony hand-washing area. It’s more convenient to wash your hands and fruits now.
Wash basins can be hung on the wall.
The washbasin can also be hung on the wall to play its function, but it will involve all kinds of wall drilling. And it can’t be moved after it’s built, so consider carefully before decorating it.
The best place to put a basin in the bedroom.
The cosmetic storage cabinet can be installed under the basin. Daily skin care, makeup, and makeup removal can be done easily.
If the toilet is close to the hallway, install a basin beside the hallway to enrich the functions of the hallway.
The dining room can also be equipped with an independent basin, and the water pipe can be taken from the kitchen at the beginning of the decoration.
Installing the basin outside the bathroom, in addition to being practical and convenient, can also match the overall style of the home. The washbasin can be integrated into the design of the cabinet, and the surrounding waterproof treatment should be done.