In China some people say that the struggle in the big city is so hard. Why not go to work in a small town? Is it worth struggling to afford a small apartment for a lifetime? I believe many people will find it worthwhile, because in big cities there are opportunities that cannot be found in small towns. The small apartment is not terrible. We can remodel it. As long as we have a dream, everything is possible. The owner Mr. Zhang who lives in Shanghai, like most ordinary citizens, worked hard all the way from the small hometown and finally settled in Shanghai and bought an apartment of 70 square meters. After having a child, Mr. Zhang took his parents from his hometown. A family of 5 squeezed into a small apartment. There was only one bathroom. Every morning and every evening, they were faced with taking turns to line up to take a bath and wash. They had no patience after some time. So he thought about making another shower room, and he can make the most of the balcony. Looking at the balcony that costs him a lot, only used to pile debris and dry clothes, Mr. Zhang felt it was a pity. He had heard of a case of transforming a balcony into a shower room before, so he wondered why not give it a try. If it fails, it will be dismantled after all. After talking to his wife, Mr. Zhang started serious research. After careful study, he summarized the following points to note:
First of all, it must be waterproof. Due to the special location of the balcony, the back may be the living room or bedroom. Considering that moisture may cause mold and peeling on the back wall, it is recommended that the waterproof layer of the wall where the shower is installed is painted as high as possible. The waterproof coating is generally brushed 2~3 times.
Second, make sure that the ground has a slope. The ground also needs to be waterproofed, and it is also necessary to ensure that the ground has a certain slope so that the sewage from the bath is discharged to the drain and will not flow back to the living room or other places.
Third, strengthen heat preservation. There is a big difference between the balcony shower room and the indoor shower room. Generally, the indoor shower room has only one wall with windows, and it can be kept warm by installing a heating system.
Finally, pay attention to the issue of privacy.
After studying how to install it, the next step is to choose a good shower room. Which products can meet this special demand? Because the balcony shower room is unavoidable from the wind and sun, we must pay attention to its material and anti-rust, anti-corrosion, and anti-fading ability. At the same time, pay attention to whether the frame is strong and stable, and the wall of the shower room must be strong.
After comparison, Mr. Zhang finally chose this shower room. This shower room is based on apartment space. The large apartment frame glass curtain wall, angular and cylindrical surfaces make the entire bathroom space richer.
At the same time, automotive-grade toughened glass has a thickness of 10MM, can withstand 700° high temperature, and has a high strength about 5 times that of ordinary glass, with outstanding impact resistance and thermal stability. In addition, EPM steel mold protection is added, so you don't have to worry about the risk of glass bursting. Even if it breaks, it will still stick to the debris to prevent the glass from splashing and hurting people. You can take a shower without restraint.
The door frame, handle and hinge outside the main body of the shower room are all made of high-quality aluminum alloy, and the surface should also be treated with anti-corrosion, anti-rust and anti-oxidation. In this way, there will be no signs of paint falling off after being exposed to the wind and sun on the balcony, and the structure is relatively strong and not prone to deformation.
In addition, the shower room is installed on the balcony. We will most worry about water will flow everywhere. This shower room has a overflow channel and magnetic tape, which can lock the water in all directions. Don't need to worry about getting the living room wet.
In addition to the living room and kitchen, the bathroom that we use every day must not be sloppy in design. No matter if it is more than 10 square meters or less than 2 square meters, you must plan well to use practical and safe bathroom equipment: whether to arrange full bathroom equipment (including bathtub) or half bathroom equipment (excluding bathtub), independent or combined hand washing basins, what materials should be used for floor tiles and walls, and how to effectively use small and distorted spaces without waste, how to place multi-functional equipment without being crowded. If you are being worried about these, you can refer to these 5 bathroom design ideas from style to function, and collect them as inspiration for future designs.
Bathroom Design One: Tiles
For a water-filled bathroom, the easiest way is to attach tiles, which are not only waterproof, but also dry quickly. Common 30*30cm tiles are easy to construct and easy to clean; mosaic tiles can be arranged in patterns, and wood grain tiles solve the problem of solid wood prone to moisture and mildew. Textured bamboo tiles also have anti-slip effects, which are both functional and can create multiple styles of bathroom design materials.
Bathroom Design Two: Cement wall
Using cement as the theme of the bathroom space makes the space pure, visually extraordinarily refreshing and clean. And there is no need to worry about the accumulation of scale in the crevices of the tiles. For maintenance, as long as the bottom is waterproof, the upper transparent waterproof paint is basically unlikely to have sanding problems.
Bathroom Design Three: Black Frame Glass
Industrial style can not only be used in public spaces. For small-sized houses and the bathroom of the master bedroom, black-framed glass can be used instead of solid wall partitions. Not only is it visually more open and transparent, it has its own style compared to ordinary glass compartments.
Bathroom Design Four: Separation of Dry and Wet
Similar to hotels and Japanese residences, sinks and showers can be separate. The independent design not only alleviates the problem of insufficient bathroom space, but also makes the sink a part of the room or public space, and it is also more convenient to use.
Bathroom Design Five: Shower Curtain as A Cubicle
If you want to have both a shower and a bathtub in a small bathroom space, try replacing the glass compartment with a shower curtain. In this way, the basic dry and wet separation can be achieved, and the space occupied by the fixed partition door can be avoided. It has high appearance and can change the pattern style according to the mood.
When designing a functional kitchen, the rule of triangles should be kept in mind. That is, the sink, stove and refrigerator are arranged in a triangle. The L-shaped kitchen fits this triangle shape very well. The L-shaped layout is most suitable for small and medium-sized kitchens. The first-class kitchen is not only about the layout, but also about creating delicious food through the inspiration of the right layout.
1. The blank walls are decorated with a series of wall shelves and hanging rails for kitchen utensils.
2. This design allows flower pots to be stored in a space that is not large enough to accommodate a shelf.
3. This complete wooden kitchen extends its style beyond the corridor, to the adjacent wall and a room door.
4. The length of the double-window countertop looks magnificent, and the intricate patterns on the other wall balance the overall appearance.
5. Large potted plants form a natural separation between the kitchen and dining area.
6. Use inline mode to make full use of small space.
7. The combination of open shelves and multi-colored blocks is an interesting solution.
8. Minimalist kitchens can use handleless flat embedded-in-wall furniture.
9. Even the few special tiles can bring new colors to the pure white kitchen.
10. An open shelf occupies one wall, and a closed cabinet occupies another wall. Keep small spaces ventilated and open, instead of containing too many complex elements.
11. Floor tiles help make smaller spaces appear wider.
12. Horizontal stripes are another way to expand the space visually.
13. This extraordinary kitchen has a series of open and closed designs that can show and hide different appliances.
14. Two bar stools turn the end of a cabinet into a breakfast bar.
15. Wrap the work counter on the side of the end cabinet to get a stylish and luxurious appearance.
16. This L-shaped kitchen layout has corner windows and is dominated by pure yellow color blocks. It overlaps with half of the wall cabinet and finally passes through the window glass in the form of a colored film.
17. Add light wood tones and pleasant prints to the white kitchen to create a Scandinavian-style kitchen.
This article introduces the three main components of the faucet. It will help you to understand the quality and material of faucets we use everyday. Uncover all the mysteries of the faucet.
Part 1: Composition
The three most basic components of a faucet: main body, plating and cartridge.
01 Main Body
The main body is the torso part of the faucet. The water flows in and out of the main body all the time. So the material is important. It determines the water quality.
Copper Alloy Faucet
Copper alloy is currently recognized as the most suitable main material for home use faucet, and the mainstream is brass. On the one hand, copper has good machinability, fluidity and formability. On the other hand, because copper ions have a bactericidal effect, they can kill super bacteria such as MRSA within 30 minutes and prevent the bacteria from producing antibodies. The inner wall of the copper faucet will not breed bacteria and become the most suitable carrier for "water".
According to different proportions of copper content in copper alloys, copper alloy materials can be divided into 52, 55, 59 and 62 copper. Among them, 59 copper is the best. The content of copper metal is 58%-60%, the content of lead metal is 0.08%-0.2%, and the content of other elements is about 2%. The remaining metal is basically zinc.
Because lead metal will precipitate when water enters the faucet, it will pollute the water. If the lead content is too high, it is harmful to the human body. Therefore, some brand faucets use low-lead copper, that is, the lead content is less than 0.1%. In view of the fact that it is difficult for general consumers to judge the lead content, it is recommended to choose a faucet with a clear mark that uses low-lead copper.
Zinc Alloy Faucet
Zinc alloy is an alloy based on zinc and added with other elements such as aluminum, copper, magnesium, cadmium, lead, and titanium. Zinc alloy is easily corroded in water. After being corroded, the metal will be mixed into the water and cause harm to the human body. The biggest advantage is probably the low price.
Stainless Steel Faucet
The main components of steel are iron and carbon. Ordinary carbon steel is easy to rust. Adding chromium, nickel and other metals to carbon steel can make the steel corrosion resistant. Therefore, the most important factor affecting the corrosion resistance of stainless steel is the content of chromium.
Stainless steel has the advantages of acid resistance, alkali resistance, corrosion resistance, and no release of harmful substances (lead). But compared with copper, it has one of the biggest drawbacks, that is, it does not have antibacterial function.
If the budget is sufficient, choose low-lead copper faucets. If you can't identify whether it is low-lead copper, choose a product from a big brand.
If you have a small budget, you can choose stainless steel faucets. The price will be cheaper. However, relatively there will be some problems. In particular, we must choose products from high standard manufacturers. After all, it's about your own health, don't be greedy for cheap.
The faucet is used in a humid environment, and its surface requires a good finish. The common surface treatment method on the market is electroplating, mainly including chrome plating, nickel plating, titanium plating and so on. In addition, there are some rarer methods such as baking varnish, porcelain, and imitation gold electrophoretic paint.
Chrome plating is the most common faucet plating. Chromium is a white metal with a bluish color, which has high hardness and wear resistance. Its hardness exceeds even the hardest quenched steel, second only to diamond.
Chromium is not easy to change in a humid environment and can maintain the surface gloss for a long time. With a silver appearance, chrome-plated faucets are more popular with consumers.
Nickel can quickly form a very thin passivation film on the surface of the faucet. Can resist the corrosion of water vapor and certain acids. Has excellent corrosion resistance and stability. Can resist the corrosion of water vapor and certain acids. Therefore, the stability of the nickel layer in a humid environment is very high.
Titanium alloys are made by adding aluminum and tin elements or aluminum and vanadium elements to titanium. Electroplated titanium gold has the advantages of high strength, low density, strong toughness and good corrosion resistance. The surface of the titanium-plated faucet is as smooth as a mirror. Its golden luster looks elegant and rich, and very decorative. However, the process of plating titanium gold is complicated. It is very easy to absorb impurities during thermal processing. Therefore, the yield is low. The cost is also higher.
Baking varnish is to put two layers of coating on the faucet. Each time the paint is applied, it is sent to a dust-free constant temperature baking paint room for electric heating or far-infrared high temperature baking.
The surface of the baking varnish faucet is smooth and shiny, which can present a visual texture similar to that of a piano, making the whole product look very high-grade. However, compared with other surface treatment methods, baking varnish faucets are more prone to surface peeling. The durability is not as good as the traditional chrome-plated faucet. This method is not widely used.
This treatment will make the surface of the faucet visually rough. However, it is quite delicate to the touch, showing a restrained beauty. The brushed process mainly relies on mechanical friction to produce several common textures such as straight lines, chaotic lines, threads, corrugations, swirling lines and intermittent silk lines on the surface of the faucet. It can also create matte, mirror, three-dimensional, embossed, satin and other effects.
Appropriate surface treatment can make the overall shape of the faucet rich and full. Choosing the right faucet can also become the finishing touch to the bathroom decoration. It is pleasing to the eye.
There are generally multiple layers of plating. There are also some cheap faucets that are only coated one layer. The coating is not as thick as possible, but just right. If the coating is too thin, it will not be able to prevent corrosion. If the coating is too thick, it is easy to peel off. Copper + nickel + chromium is best. Copper can provide excellent adhesion. Nickel makes the coating have excellent corrosion resistance. Chromium makes the surface bright and flawless, and it is hard and scratch-resistant. Further improving the corrosion resistance. In addition, the faucet that has passed the 48-hour professional salt spray test will be more guaranteed in terms of corrosion resistance. Aquacubic's products have passed these tests.
The cartridge is a part that realizes the basic functions of direction control, pressure control or flow control by means of the rotation of the valve stem. The water flow enters the main body of the faucet through the cartridge and finally leaves the water outlet. The faucet used at home is turned on and off countless times a day. It can be seen that the quality of the cartridge is also very important to the faucet.
The ceramic cartridge has less water pollution, good wear resistance and good sealing performance. Many high-quality faucets use ceramic cartridges. The ceramic chip must have good airtightness, stable physical properties, wear resistance, and long service life.
Stainless Steel Cartridge
The biggest advantage of the stainless steel cartridge is that it has a larger adjustable angle of rotation and is not easily affected by water quality. It is more practical to choose this type in areas with poor water quality. However, stainless steel has worse wear resistance compared to ceramic. After it is used for a long time, water leakage is prone to occur.
Roller cartridges are old-fashioned cartridges. No matter in terms of price, water pollution or life span, they are inferior to ceramics and have been phased out. There are very few roller cartridge faucets on the market.
Part 2: How to Buy ?
After understanding the most important parts of the faucet, let's take a look at the precautions when purchasing.
01 The Weight
Faucets made of brass are heavier. So you can make a preliminary judgment by weighing the faucet. However, many manufacturers can increase the weight of low-quality faucets through some methods. So here is a commonplace saying, for consumers who can't distinguish the material, it is better to choose the leading brands. This is the simplest selection method.
02 The Surface
In sufficient light, carefully observe the electroplated surface of the faucet. Good electroplating looks as bright as a mirror, without any oxidation spots and burn marks, no pores, no blistering, no plating leakage, no burrs to the touch. After pressing the faucet, the fingerprints will spread out quickly, and it is not easy to adhere to dirt.
Breathing out the surface of the faucet. For products with good electroplating quality, the water vapor will quickly and evenly fade away. If the quality is not good, the fading speed will be slower, or not fade. The faster and more even the water vapor fades, the better the quality.
03 After-sales Service
The after-sales service of the product is very important, and it is also the guarantee for you to have no worries. Be sure to buy products with good after-sales service. The general faucet is guaranteed for at least 5 years.
When choosing a faucet, the most important thing is to look at the material, plating and cartridge of the faucet. Because the material determines the safety of the water. The coating can increase the service life of the faucet, so that the faucet has scratch resistance, corrosion resistance, and the surface brightness will be better. The cartridge is the heart of the faucet. Generally high quality faucets use ceramic cartridges. It has the characteristics of strong wear resistance and good sealing performance.
At present, the concept of sanitary ware products has far exceeded the traditional concepts of the past. As a symbol of modern and luxurious life, it has entered all aspects of people's lives. That is, it not only has sanitation and cleaning functions, but also includes health care functions, visual enjoyment, and entertainment functions. The shape of sanitary ware products has appeared in one-piece type, basin series, bidet, or table-top series, etc. In recent years, sanitary ware products have also launched a series of complementary products with additional functions such as leisurely bathtubs, cabinet basins, and steam shower rooms. Therefore, in the future, it is self-evident that the sanitary ware market will show a diversified development trend.
Build A Complete Accessory Manufacturing Base
Now due to the increase and enrichment of new functions of sanitary ware products, the sanitary ware production of developed countries has been involved in a large number of accessories.
Therefore, a mature sanitary ware industry should be supported by more varieties of accessories and additional products. For example, the production of raw materials, glazes, pigments, models, machining, instruments, meters, copper work, and packaging and decoration materials that are closely connected with many sanitary ware production systems should be incorporated into the entire production system as soon as possible. The sanitary ware production industry in China urgently needs to form a complete industry group and supporting group related to sanitary ceramic production, and form a processing base for various related accessories that are compatible with the end products.
The Comprehensive Functions of The Product Are More Prominent
According to the shopping psychology of consumers in the international market, a good sanitary ware product must be able to satisfy a modern lifestyle and have a relatively complete set of functions. For example, in addition to satisfying the use function, it also needs to solve multiple functions such as water saving, energy saving, environmental protection, comfort, health care, anti-aging, and intelligent induction, and has obvious recyclability and a strong concept of green consumption. This requires a new generation of products that must be able to make full use of comprehensive high-tech achievements such as biotechnology, electronic technology, and induction technology to combine various new functions to improve the comprehensive functions and physical quality of sanitary ceramic products.
Rich Decorative Colors
In the past, sanitary ware products were often decorated with white glaze to show their white jade-like appearance. But the cool tone of its color makes many people feel uncomfortable. Nowadays, it is generally recognized that various opalescent white glazes are mainly used for the appearance of products with other colors and shades. China sanitary ware factories should use the coordination of various glazes to create a variety of popular new decorative colors. The changing rhythm of sanitary ware products, just like the promotion of popular colors in major international clothing exhibitions in the world every year, shows the visual function of leading new trends in colors from time to time. With the continuous updating of people's aesthetic perspectives and the rapid changes in domestic and foreign market demands, it is necessary to accelerate the development of a new generation of glaze decoration varieties and strengthen the new color decoration of products.
In short, China sanitary ware factories must continuously improve the technical content of export products, and continue to improve the grade and added value of export products. Continuously develop a new generation of new high-end products to meet the needs of domestic and foreign markets. It is conducive to entering the international high-end market. It is believed that China sanitary ware factories will become stronger.
In daily life, the planning of the bathroom is very important. A space of a few square meters has to bear a lot of sanitary ware and electrical appliances, such as toilets, bathtubs, washing machines, clothes dryers, etc. These are essential equipment that can improve the comfort and convenience of life.
The three-square-meter bathroom is also the size of most apartment bathrooms. The space is not large, but it does not affect people's pursuit of quality life. How to make good use of small space and achieve the aim of practical and beautiful appearance ? There are many ways.
01 Extend the sink counter to the washing machine and get an extra storage table.
If the area of the sink counter is relatively wide, you might as well design the washing machine and sink counter as a whole. By the way, the upper part of the washing machine is also designed as a countertop, which has an extra space for display. The whole area be neat and decent.
A large sink is exactly what women need. They have too many skin care products and cosmetics to be placed.
Suitable for: single women, or small families.
Advantages: The upper part of the washing machine is fully utilized and many things can be placed.
Of course, if you want to pay attention to some design sense, you can design the washing machine and the sink in a staggered layer, showing a patchwork of beauty, and it can also bring a unique atmosphere to a small space.
02 The washing machine and the storage cabinet coexist harmoniously, and one thing is multi-purpose and takes up less space.
If there are many things in the house, consider using more storage cabinets in the bathroom. But in a small space of three square meters, how should the washing machine be placed?
The washing machine, storage cabinet, and sink can be designed as a whole, and the three can use each other to realize their own value, visually beautiful, form a multi-purpose, and occupy a small area.
Suitable: Families with lots of things.
Advantages: One thing is multi-purpose, and it occupies a small area.
03 Maximize the use of corner space
There is always an unexpected room type of an apartment, such as a three-square-meter rectangle, but it happens to be faced with the problem of a lot of things and a lot of demand. The washing machine and the cabinet need to be put in the bathroom. How to achieve it ?
Three walls can be used. The storage cabinets, sinks, and washing machines leaning against the wall can perfectly maximize the use of corner space.
Suitable for: families who have many things and pay attention to space design.
Advantages: The smallest space is used to the maximum.
04 Storage rack: Use the height of space to realize vertical storage.
Different room types and different residents have different requirements for the placement of washing machines. Some people like simple display. Easy to take things, and easy to move the washing machine. In fact, a storage rack can solve all the troubles. The storage rack is light and convenient, and there is no construction problem. You only need to place it in a suitable position, put daily necessities on it, and put a washing machine underneath it to achieve a perfect plan for a small space. This is also a way to achieve vertical storage, which saves more space.
Suitable for: Singles with less things and high requirements for the convenience of life.
Advantages: easy to move, easy to clean, and less costly for decoration.
It is not difficult to stuff a washing machine in a three-square-meter bathroom. The key is to design in combination with different room types. In addition, the living needs and actual conditions of different residents must be considered to create a comfortable and practical bathroom space.
Aquacubic Has Rich Experience and Passion in Bath and Kitchen Industry. We can provide total solution for apartment projects.
Whether the owner of a house is willing to clean the room, the point is not how nice the living room is, but how clean the bathroom is. So what should a good-looking bathroom need to be? Let's take a look. The sink over vanity is the most important part of the bathroom. Therefore, a nice sink can add a lot to the beauty of the bathroom.
There are two types of drainage.
Drainage in Wall: no exposed pipes can be seen, more beautiful.
Drainage in Floor: It can be seen that the pipe is directly connected to the countertop from the floor. There will be more cleaning work.
The advantage of the in-wall drainage is that if there is a leak in the drainage pipe upstairs, the neighbors downstairs will not be flooded.
The disadvantage is that once the drainage pipe buried in the wall is blocked, the wall needs to be destroyed, and the pipe may be dredged. But redoing the wall decoration is a new problem.
So you must use good materials when burying it, or you will be tossing yourself. Chinese families basically use the in-floor drainage, so they all need to customize the bulky cabinet to cover it.
Compared with the traditional floor-mounted bathroom cabinets, the wall-mounted cabinets has a better appearance and lightness. Its bottom is suspended, which is very convenient to clean up. And without a hint of bulkiness, it looks very stylish and beautiful.
Wall-mounted wash basins generally choose in-wall drainage, and the drain pipe is perfectly hidden in the wall. So drain pipe can not be seen. It will improve overall aesthetics. Therefore, before installing the washbasin, drainage treatment must be done so that it will not cause too much trouble for later maintenance.
In addition, the bottom of the washbasin can be selected according to your own preferences, made into an open partition or a closed cabinet, or simply mixed and matched, which can meet the storage needs of towels and some toiletries.
In modern bathroom design, floor-standing vanities are also welcomed by many young people today. However, its bottom is not completely close to the ground, and it does not look as solid and bulky as it used to be. It is basically designed with a bottom space, and it is supported by thin feet, which is also very convenient to install.
Of course, in addition to the pursuit of beauty, if you do not do a good job in the shower separation, it may cause water stains to penetrate or erode the cabinet legs, which will shorten the service life of the vanity over time.
There is no fixed choice for the drainage method of the floor-standing cabinet.
Even if you hide the sewer pipes in the cabinet in order to save effort, you can still ensure beautiful and practical effects. Make full use of the space. All objects will be placed neatly and uniformly.
I always thought that the washbasin is everything.
Later, after listening to the professional tasting, I realized how superficial such thoughts are. The washbasin is only a small part.
Above counter basin: high-end and high-grade.
Advantages: safe and convenient, many choices, the most important thing is easy disassembly.
Disadvantages: warping will appear at the connection with the countertop, especially the cheap water basin. And it is prone to leaking water to the sink cabinet. If the installation is not careful, there will be exposed glass glue, which will turn yellow and black after a long time.
Under-counter basin: low-key luxury.
Advantages: integrated with the countertop, beautiful and easy to clean.
Disadvantages: The countertop needs to be processed and installed in the workshop. The designer or installation worker who has insufficient experience will cause the water basin to deviate from the middle of the sink cabinet; it is necessary to choose a faucet with a suitable water outlet angle; it is inconvenient to disassemble.
By the form of installation, it can be divided into two types. One is a floor-standing and the other is a wall-mounted. Generally, floor-standing cabinets are used in bathrooms with separate shower rooms, and are more compatible with floor drainage. If your bathroom has a larger space, you can choose floor-standing wash cabinets.
Wall-mounted wash cabinets have become more popular in recent years. Its biggest advantage is that it is easy to take care of and save space.
In short, in this era of pursuing the supreme beauty, even the vanity has become more advanced unknowingly! If you don't want to make your vanity and bathroom sink look so mediocre, you might as well do some bold attempts and use the most popular design to improve the quality of life!
Aquacubic has rich experience and passion in bath and kitchen industry and appreciate your contacting and business.
We can provide total solution for projects. Look forward to cooperating with you.
Speaking of bathroom, the first thing many people think of is that we must separate wet and dry functions. After all, the traditional integrated type is too inconvenient to use. The bathroom is always wet, and even the towels have a musty smell. With the improvement of people's living standards, more and more people hope that the bathroom can be truly hygienic.
Three-way separation, that is, the basin area, shower area and toilet area are completely separated.
Advantages of three-way separation:
First, each washing area is an independent space, ensuring privacy while isolating smell and humidity;
Second, improve safety, especially for families with the elderly and children, and reduce the possibility of slipping due to water in the bathroom;
Third, ensure the cleanliness of the bathroom, and extend the service life.
How to create a three-way separation for a 3 square meter bathroom?
As soon as you enter the room, it is the washing area, which is the most frequently used area in the entire bathroom, so placing it at the door does not affect the use of other areas.
The middle position is the toilet area. The small toilet is separated by a baffle to form an independent space. If you feel that it is not private enough, you can install a small shower curtain to completely separate the toilet area. This is generally not recommended. After all, it affects the appearance, and it also gives people the feeling of being cramped.
The square space uses all the walls. A few niches or horizontal partitions are placed on one end of the bathtub to hold bath towels and clothes. The bath area is designed in the innermost part, the edge of the bathtub itself is an isolation belt, and the shower head is installed on the wall at the other end of the bathtub, which is convenient and does not take up space.
Although the square space is not very easy to handle, it can be regarded as "excellent brushwork" through this elaborate design.
Compared with a square bathroom, a rectangular space will make the best use of everything.
The same is the wash area next to the door. The difference is that the rectangular space also has a place to put the washing machine. When you take a shower, you can throw your clothes into the washing machine.
Placing the toilet and shower in parallel on the innermost side and covering the tub with a shower curtain.
The above are two designs of 3 square meters bathroom. Of course, there are more design styles, such as a sliding folding door instead of a shower curtain.
This folding door design not only saves space, but also has good privacy. Very practical.
With some simple lighting, the bathroom can also be a beautiful scenery.
The barn door design completely separates the bathroom area.
A small bathroom doesn't necessarily need a bathtub. But if removing the wall partition and replace it with a shower curtain, there will be bathtub area.
The shower room can be placed in the triangular area at the corner of the bathroom to form a fan-shaped area, which is the most space-saving.
It is best to use a small size. After all, if the toilet is too big, it doesn't seem to be of much use except for taking up space.
What are the precautions for the three-way separation?
Because the space is relatively small, the tones of the floor tiles and the walls should be matched reasonably. It is best to focus on warm colors, which are swelling colors. They have the effect of "expanding" the space.
Try to choose a mirror as large as possible. The role of a large mirror is the same as the color tone, which increases the sense of space.
The corners must not be wasted. Simple wooden shelves and niches are good storage methods.
The last thing we must pay attention to is ventilation. It is important to reduce odors.