There are no ifs in life, and even more for decorations. There is no what ifs after the decoration is finished. In order to avoid this kind of regret, we summarized many kitchen decoration experiences for you.
1. The most durable cabinet door panel is the fireproof panel, the shortest life span is the blister, the most non scratch resistant is the painted, the most expensive is the solid wood, and the cheapest is the double veneer.
2. The stainless steel countertop is the most durable, the artificial stone is the least resistant to dirt, and the quartz stone is the most expensive. If used frequently, stainless steel countertops are the most suitable. If the color tone is cold, you can use panels and tiles appropriately.
3. The stainless steel embossing countertop is less scratched than the brushed countertop.
4. The stove must have small openings on the surface to prevent the soup from overflowing into the stove.
5. The sink must have a bottom grid to prevent the sewer from being blocked and to facilitate cleaning.
6. When renovating water pipe and electricity, you must think about the cabinet layout and electrical requirements. Be sure to reserve enough sockets. It is better to keep sockets on the front and rear walls. Waterproof covers are not necessary.
7. If most of the gas pipes are wrapped in the cabinet, it is best to leave a gas alarm socket.
8. The tiles in the kitchen can be matte or polished, which are easier to clean. Don't choose pitted or rough models, which are difficult to take care of.
9. If you rarely cook, consider an open style. If cook much, it is safer to be closed. No matter how good a range hood is, it is impossible to suck all the fumes away.
10. The hose must be replaced every two years.
11. In addition to the main valve, it is better to have separate valves for gas stoves and gas water heaters, so that they can be closed easily when problems occur.
12. The sink drain must be made S-bend, otherwise the smell will return.
13. Do not apply glue between the stove and the countertop to facilitate safety inspection.
14. When installing the side range hood, it is better to be as close to the stove as possible.
15. If you install an ordinary or European-style range hood, it is better to install a thin stainless steel plate on the tile around the stove, so that it can be easily cleaned.
Cleaning the bathroom is a very important and troublesome task. It is not like the kitchen with obvious large stains and greasy walls, but it is the wettest place in the house. If the cleaning is not in place, it is very easy to breed bacteria. Dust and stains in the bathroom are mostly on various sanitary wares in the space. Although it is not obvious, there are great hidden dangers, such as faucets, toilets, showers, floor drains, shower curtains and so on.
In order to have a clean and hygienic space, this time we will share some simple ways to clean the bathroom. Make your bathroom clean and tidy, and make cleaning fast and easy.
01 Clean the Faucet
Frequent use of the faucet causes water stains to accumulate and looks dirty. What should we do?
You can apply toothpaste to the faucet, wipe it with a damp cloth, and rinse it off.
If you want to restore the faucet to the previous brightness, you can also wipe it with orange peel on the surface of the faucet, and then dry it with a clean soft cloth. This is because orange peel contains fruit acid, which can maintain the surface of stainless steel and make the faucet look new.
02 Cleaning the Mirror
Do bathroom mirrors also need to be washed? If the mirror is used for a long time, it will feel that there is a thin layer of "fog" on it, which causes the mirror surface to be not clear enough. If so, it means it's time to wash your mirror!
To clean the mirror, you can use vinegar, toothbrush, soap:
1. Use a cloth dipped in vinegar to wipe the mirror. The water stains on the mirror are alkaline, which can neutralize the acetic acid in the vinegar, so that the mirror shines as new.
2. Use toothpaste to scrub the mirror, it can also ensure that the mirror is clean and bright
3. Household soap to wipe the mirror surface is also effective in restoring the clarity of the mirror.
Finally, after cleaning the mirror, remember to wipe off the water drops on the mirror surface with a dry cloth or paper towel to prevent water stains from leaving water marks on the mirror surface.
03 Clean the toilet
How can the cleanliness of the bathroom be missing the toilet? Those places that the toilet brush can't reach are the depressing existences. In fact, it is not difficult to solve the dirt on the inner corners of the toilet.
Mix white vinegar and baking soda at a ratio of 1:1 to make a cleanser. Spray it around the toilet and let it stand for 30 minutes. The stains will be washed away, which is more than a toilet cleaner.
Spray it before starting to build the bathroom, and when other hygiene is done, the toilet can be flushed.
04 Cleaning Tiles
The ceramic tiles will become yellow and black due to long-term water stains and bath products impregnation. How can the stains be easily brushed?
Mix vinegar and water in a ratio of 1:1 and spray it on the tiles. Spray more on the moldy areas. When it is air-dried naturally, rinse them with clean water.
05 Clean the Shower
After the shower has been used for a long time, a lot of scale will accumulate on the water outlet. It is not only ugly, but also blocks the water outlet. And it will breed bacteria, so the cleaning of the shower must not be ignored.
The cleaning of the shower head is very simple. Just take a plastic knife, pour some white vinegar (to submerge the shower head), wrap the shower head and fix it with a rubber band. After soaking for 1 hour, turn on the flushing water, and the scale can be cleaned. At the same time, white vinegar also has the effect of disinfection and sterilization, which can kill two birds with one stone.
In addition to stains in the bathroom, there is also an unpleasant odor. The bathroom with a "weird" smell is the most intolerable!
06 Toilet Deodorization
If you want to remove the smell in the bathroom, you can do this!
1. Pour white vinegar into the floor drain, wait for 3-5 minutes, pour the mixed solution of water and baking soda into the floor drain. The soda solution and the white acetic acid alkali will be neutralized. It can quickly eliminate the smell of the floor drain.
2. Slice the fresh lemon and put it in the bathroom to prevent mildew and odor.
3. Put a cup of balsamic vinegar. The smell of the bathroom will disappear. But the balsamic vinegar should be changed regularly, like once a week.
After learning these tricks, clean up your bathroom as soon as possible. The bathroom will feel like a brand new one.
The bathroom is the wettest place in the house, and it is easy to breed bacteria if it is not properly cleaned. Next, learn these tips to make the bathroom as clean as new!
Clean the Faucet
Does the water stain on the faucet look dirty? Water stain can be removed with one trick! Mix the white vinegar and baking soda powder evenly, put the toilet paper in and soak it completely, then cover the faucet for 30 to 60 minutes, uncover it and rinse with water.
Cleaning the Shower Head
If the shower head is used for a long time, there will be a layer of scale on the surface, which looks dirty, and even more serious it will block the water outlet! You can take a plastic bag, pour white vinegar, wrap the shower head and fix it with a rubber band, soak it for 1 hour and then dry it with a dry towel. The shower head will be as clean as new. A clean shower head is much more comfortable to use!
Cleaning the Toilet
1. For yellow stains that are difficult to remove in the toilet, you can sprinkle with baking soda and soak in hot water for half an hour before washing. Remember to cover the water outlet on the inner edge of the toilet with toilet paper soaked in baking soda solution to achieve the purpose of soaking. The same goes for squatting toilets!
2. If conditions permit, you can remove the toilet lid and clean the gap.
3. Add some white vinegar to the water tank, which not only has the effect of disinfection and sterilization, but also removes the scale attached to the inner wall of the water tank.
Cleaning Bathroom Tiles
The joints of toilet tiles can easily turn yellow and black. Dip and use a toothbrush with washing powder, toothpaste or baking soda can effectively brush off stains. Remember to clean up water stains every time you use the bathroom!
Cleaning the Exhaust Fan
Exhaust fans can help keep the toilet dry, but because of the inconvenience of cleaning, it is often overlooked by us and becomes a place to hide dirt!
1. Remove the fan cover, soak it in soapy water and wash it, and then dry it.
2. Soak the rag in soapy water, wring it out, and carefully scrub the fan blades and vents. Finally wipe it with a dry towel.
3. Install the dried fan cover as it is.
Cleaning the Mirror
Bathroom mirrors are often stained with toothpaste, water stains and other things. At this time, you might as well use the leftover black tea bag to gently wipe the spots on the mirror, and then wipe it with a dry cloth to restore it to new.
Clean Rust Stains
The bathroom is damp. In case the metal utensils rust, you can cut the lemon in half, squeeze the lemon juice on the rust stains, soak for 10 minutes, brush off with a brush, and finally clean it with clean water.
There are many bottles and cans in the bathroom. You can apply a layer of nail polish on the bottom of the rust-prone material in advance to prevent rust.
Ceramic sink is a kind of household goods. There are many kinds of sink materials, such as cast iron enamel, ceramics,
steel plate enamel, artificial stone, acrylic, crystal stone flume, etc. Most bathroom sinks are made from firecaly.
Ceramic sink is a kind of water sink which is made by integrated molding and firing. Its main body is mainly white.
It has the advantages of high temperature resistance, easy cleaning and aging resistance.
It can be wiped clean with cloth or clean metal ball in daily cleaning.
Step Ⅰ. Grouting
The production of ceramic sink is generally made by grouting.
The slurry is poured into a fixed die and allowed to solidify.
Step Ⅱ. Spraying Glaze
It is necessary to prepare qualified glaze slurry. Spray it on the surface of sink body.
Vitrify it into porcelain after firing; cover it on the surface.
Step Ⅲ. Forming
Forming is a drying process.
The process of further dehydration of semi-finished products.
Step Ⅳ. Preparation for Furnace
This is an important step before burning.
Workers need to check the surface & quality of the sinks and lay them together in trolley.
Step Ⅴ. Burning
Put the products on the kiln car according to certain proportion.
Based on the given temperature curve, sink will form finally.
Step Ⅵ. Storage & Logistic
With the development of storage & logistics industry,
we developed a complete solution for big size cargos.
For decoration, it is not easy to choose a suitable washroom basin. There are a lot of basins that are just plain useless.
Should we choose an over-counter, under-counter, integrated or pedestal basin ?
Let's take a look at the advantages and disadvantages of these basins and see which features are what we want most.
The bathroom is sometimes a dirty space, which is not easy to clean and take care of. The dampness, dirt, and bacteria can easily breed. Well, there may be cockroaches and spiders...
To keep the bathroom clean and tidy, the two most important points are: easy to tidy up and keep it dry.
If you choose basins based on these two points, let's analyze them one by one.
Above Counter Basin (Always Beautiful)
I stayed in a hotel once. The bathroom design was very creative. There are two wash basins. One is a normal under-counter basin, and the other is an above-counter basin with excellent artistic sense.
I use the under-counter basin for washing, but I always glance at the above-counter basin like a work of art.
Almost all such beautiful above counter basins can become an installation art in the home. For those who are pursuing art decoration, you can consider buying an above counter basin.
Under Counter Basin (Practical)
The embedded under counter basin and the "invisible" shape make the wash area look more refined and simple. This is probably a basin that many families use more often.
The basin connected with the countertop (Easy to Install)
The countertop and the basin are integrally formed, which saves a lot of trouble for cleaning. Because it is a modular grouping mode, the installation has zero pressure.
Semi-hanging Basin (Saving Space)
A semi-hanging basin is suitable for some customers, if we want to leave a little more space.
Pedestal Basin (Long Legs)
Especially suitable for use in small spaces.
Cylindrical Basin (Artistic Sense)
The cylindrical basin can be disassembled. Because it is straight-through, it is not easy to block. The disadvantage is that there is no countertop for placing bathroom accessories.
The selection of the basin also needs to be decided according to the specific design plan, such as shape, color matching, size and so on.
Finally, in order to keep this space dry and clean, we need to use a dry towel to wipe off the water in time, ventilate as much time as possible every day, and so on. Although it may seem troublesome, once you develop a habit, it will naturally be a lot easier .
If not to consider the faucet valve core and aerator, lead-free brass faucet and general faucet mainly differ in the material and technology.
Ⅰ. Raw Materials
The main raw material of lead-free brass faucet is made of international standard H59 and H62 copper. The casting adopts steel mold for gravity casting with uniform faucet wall thickness of 2.2-3.0 mm.
The main reason for using brass is the antibacterial activity. This can prevent bacteria from growing on the inner wall of the faucet, which is an advantage that other materials (such as stainless steel and plastic) do not have.
Ⅱ. Surface Technology
Surface treatment is very important for lead-free faucet, which is related to the service life, finish and wear resistance of the faucet. High quality faucet surface electroplating is usually mirror effect. It can eliminate secondary water pollution and ensure water safety.
How to judge the quality of the surface treatment of a faucet?
It can be easily judged by the following 3 points:
1. A good faucet will have a moisturizing and shiny surface, while a poor quality will have a dim gloss;
2. A good faucet will have a flat surface, while a poor quality faucet will have a wave surface, even a dent.
3. Good faucets are more wear-resistant, and there are no scratches, but inferior products will have dense scratches on the surface.
Generally, the surface coating of high-quality brass faucet has only 2 layers, and the product can pass 48 hours neutral and 24 hours acid salt spray test.
Ⅲ. Production Process
The production process of faucet is generally the following 16 steps:
copper ingot - dissolution - casting - cleaning after casting - casting inspection - machining - tolerance inspection - grinding - surface inspection - electroplating - electroplating inspection - assembly - pressure test - finished product inspection - packaging - delivery.
Each process has strict requirements for the production process.
The difference of faucet material selection and production technology determines that the price of lead-free brass faucet is generally higher than stainless steel and plastic faucets.
In addition to the living room and kitchen, the bathroom that we use every day must not be sloppy in design. No matter if it is more than 10 square meters or less than 2 square meters, you must plan well to use practical and safe bathroom equipment: whether to arrange full bathroom equipment (including bathtub) or half bathroom equipment (excluding bathtub), independent or combined hand washing basins, what materials should be used for floor tiles and walls, and how to effectively use small and distorted spaces without waste, how to place multi-functional equipment without being crowded. If you are being worried about these, you can refer to these 5 bathroom design ideas from style to function, and collect them as inspiration for future designs.
Bathroom Design One: Tiles
For a water-filled bathroom, the easiest way is to attach tiles, which are not only waterproof, but also dry quickly. Common 30*30cm tiles are easy to construct and easy to clean; mosaic tiles can be arranged in patterns, and wood grain tiles solve the problem of solid wood prone to moisture and mildew. Textured bamboo tiles also have anti-slip effects, which are both functional and can create multiple styles of bathroom design materials.
Bathroom Design Two: Cement wall
Using cement as the theme of the bathroom space makes the space pure, visually extraordinarily refreshing and clean. And there is no need to worry about the accumulation of scale in the crevices of the tiles. For maintenance, as long as the bottom is waterproof, the upper transparent waterproof paint is basically unlikely to have sanding problems.
Bathroom Design Three: Black Frame Glass
Industrial style can not only be used in public spaces. For small-sized houses and the bathroom of the master bedroom, black-framed glass can be used instead of solid wall partitions. Not only is it visually more open and transparent, it has its own style compared to ordinary glass compartments.
Bathroom Design Four: Separation of Dry and Wet
Similar to hotels and Japanese residences, sinks and showers can be separate. The independent design not only alleviates the problem of insufficient bathroom space, but also makes the sink a part of the room or public space, and it is also more convenient to use.
Bathroom Design Five: Shower Curtain as A Cubicle
If you want to have both a shower and a bathtub in a small bathroom space, try replacing the glass compartment with a shower curtain. In this way, the basic dry and wet separation can be achieved, and the space occupied by the fixed partition door can be avoided. It has high appearance and can change the pattern style according to the mood.
In daily life, the planning of the bathroom is very important. A space of a few square meters has to bear a lot of sanitary ware and electrical appliances, such as toilets, bathtubs, washing machines, clothes dryers, etc. These are essential equipment that can improve the comfort and convenience of life.
The three-square-meter bathroom is also the size of most apartment bathrooms. The space is not large, but it does not affect people's pursuit of quality life. How to make good use of small space and achieve the aim of practical and beautiful appearance ? There are many ways.
01 Extend the sink counter to the washing machine and get an extra storage table.
If the area of the sink counter is relatively wide, you might as well design the washing machine and sink counter as a whole. By the way, the upper part of the washing machine is also designed as a countertop, which has an extra space for display. The whole area be neat and decent.
A large sink is exactly what women need. They have too many skin care products and cosmetics to be placed.
Suitable for: single women, or small families.
Advantages: The upper part of the washing machine is fully utilized and many things can be placed.
Of course, if you want to pay attention to some design sense, you can design the washing machine and the sink in a staggered layer, showing a patchwork of beauty, and it can also bring a unique atmosphere to a small space.
02 The washing machine and the storage cabinet coexist harmoniously, and one thing is multi-purpose and takes up less space.
If there are many things in the house, consider using more storage cabinets in the bathroom. But in a small space of three square meters, how should the washing machine be placed?
The washing machine, storage cabinet, and sink can be designed as a whole, and the three can use each other to realize their own value, visually beautiful, form a multi-purpose, and occupy a small area.
Suitable: Families with lots of things.
Advantages: One thing is multi-purpose, and it occupies a small area.
03 Maximize the use of corner space
There is always an unexpected room type of an apartment, such as a three-square-meter rectangle, but it happens to be faced with the problem of a lot of things and a lot of demand. The washing machine and the cabinet need to be put in the bathroom. How to achieve it ?
Three walls can be used. The storage cabinets, sinks, and washing machines leaning against the wall can perfectly maximize the use of corner space.
Suitable for: families who have many things and pay attention to space design.
Advantages: The smallest space is used to the maximum.
04 Storage rack: Use the height of space to realize vertical storage.
Different room types and different residents have different requirements for the placement of washing machines. Some people like simple display. Easy to take things, and easy to move the washing machine. In fact, a storage rack can solve all the troubles. The storage rack is light and convenient, and there is no construction problem. You only need to place it in a suitable position, put daily necessities on it, and put a washing machine underneath it to achieve a perfect plan for a small space. This is also a way to achieve vertical storage, which saves more space.
Suitable for: Singles with less things and high requirements for the convenience of life.
Advantages: easy to move, easy to clean, and less costly for decoration.
It is not difficult to stuff a washing machine in a three-square-meter bathroom. The key is to design in combination with different room types. In addition, the living needs and actual conditions of different residents must be considered to create a comfortable and practical bathroom space.
Aquacubic Has Rich Experience and Passion in Bath and Kitchen Industry. We can provide total solution for apartment projects.